From: Ping Cheng <pinglinux@gmail.com>
To: Henrik Rydberg <rydberg@euromail.se>
Cc: linux-input@vger.kernel.org
Subject: Re: [PATCH 4/4] input - wacom: Support 2FGT in MT format
Date: Fri, 11 Feb 2011 12:35:41 -0800 [thread overview]
Message-ID: <AANLkTimBPBDCBzw0fbDpLf8F7N_zG+ceKJAC9Li15g5P@mail.gmail.com> (raw)
In-Reply-To: <20110211202010.GB2287@polaris.bitmath.org>
On Fri, Feb 11, 2011 at 12:20 PM, Henrik Rydberg <rydberg@euromail.se> wrote:
> Hi Ping,
>
> On Thu, Feb 10, 2011 at 05:33:03PM -0800, Ping Cheng wrote:
>
> Given the nice patch below, there has to be _something_ to say about it here, hmm?
>
>> Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
>> Signed-off-by: Ping Cheng <pingc@wacom.com>
>> ---
>> drivers/input/tablet/wacom_sys.c | 12 ++++----
>> drivers/input/tablet/wacom_wac.c | 61 ++++++++++++++++++++++++++++++-------
>> 2 files changed, 55 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
>> index fc38149..b97665f 100644
>> --- a/drivers/input/tablet/wacom_sys.c
>> +++ b/drivers/input/tablet/wacom_sys.c
>> @@ -193,16 +193,16 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
>> case HID_USAGE_X:
>> if (usage == WCM_DESKTOP) {
>> if (finger) {
>> - features->device_type = BTN_TOOL_DOUBLETAP;
>> + features->device_type = BTN_TOOL_FINGER;
>> if (features->type == TABLETPC2FG) {
>> /* need to reset back */
>> features->pktlen = WACOM_PKGLEN_TPC2FG;
>> - features->device_type = BTN_TOOL_TRIPLETAP;
>> + features->device_type = BTN_TOOL_DOUBLETAP;
>> }
>> if (features->type == BAMBOO_PT) {
>> /* need to reset back */
>> features->pktlen = WACOM_PKGLEN_BBTOUCH;
>> - features->device_type = BTN_TOOL_TRIPLETAP;
>> + features->device_type = BTN_TOOL_DOUBLETAP;
>> features->x_phy =
>> get_unaligned_le16(&report[i + 5]);
>> features->x_max =
>> @@ -241,11 +241,11 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
>> case HID_USAGE_Y:
>> if (usage == WCM_DESKTOP) {
>> if (finger) {
>> - features->device_type = BTN_TOOL_DOUBLETAP;
>> + features->device_type = BTN_TOOL_FINGER;
>> if (features->type == TABLETPC2FG) {
>> /* need to reset back */
>> features->pktlen = WACOM_PKGLEN_TPC2FG;
>> - features->device_type = BTN_TOOL_TRIPLETAP;
>> + features->device_type = BTN_TOOL_DOUBLETAP;
>> features->y_max =
>> get_unaligned_le16(&report[i + 3]);
>> features->y_phy =
>> @@ -254,7 +254,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
>> } else if (features->type == BAMBOO_PT) {
>> /* need to reset back */
>> features->pktlen = WACOM_PKGLEN_BBTOUCH;
>> - features->device_type = BTN_TOOL_TRIPLETAP;
>> + features->device_type = BTN_TOOL_DOUBLETAP;
>> features->y_phy =
>> get_unaligned_le16(&report[i + 3]);
>> features->y_max =
>> diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
>> index fc0669d..39c289d 100644
>> --- a/drivers/input/tablet/wacom_wac.c
>> +++ b/drivers/input/tablet/wacom_wac.c
>> @@ -675,6 +675,38 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
>> return 1;
>> }
>>
>> +static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
>> +{
>> + struct input_dev *input = wacom->input;
>> + unsigned char *data = wacom->data;
>> + int i;
>> +
>> + if (wacom->shared->stylus_in_proximity && !wacom->shared->touch_down)
>> + return 0;
>
> Seeing one case handled out of four possible always makes me nervous.
The above statement is to avoid going through the input_mt_slot and
input_mt_report_slot_state routines without posting any meaningful
events. I guess it could be considered as a performance enhancement?
Which case makes you nervous? I'll take care of it ;).
>> +
>> + for (i = 0; i < 2; i++) {
>> + int p = data[1] & (1 << i);
>> + bool touch = p && !wacom->shared->stylus_in_proximity;
>> +
>> + input_mt_slot(input, i);
>> + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
>> + if (touch) {
>> + int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
>> + int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
>> +
>> + input_report_abs(input, ABS_MT_POSITION_X, x);
>> + input_report_abs(input, ABS_MT_POSITION_Y, y);
>> + }
>> +
>> + /* keep touch bit to send proper touch up event */
>> + wacom->shared->touch_down = max(touch, wacom->shared->touch_down);
>
> So only false->true is possible here.
Yeah, both are bools. What else can they take?
> What I can see from the patchset, only wacom_tpc_single_touch() will ever set touch_down to
> false. Is that sufficient?
No, wacom_tpc_mt_touch can set touch_down to false too. When touch is
false, touch_down will be false. This happens when pen in prox or when
both fingers are up.
Where else do you see it can be changed? tpc_pen() can not do that
since it is on a different port, that's the reason of touch_down.
Ping
>> + }
>> +
>> + input_mt_report_pointer_emulation(input, true);
>> +
>> + return 1;
>> +}
>> +
>> static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
>> {
>> char *data = wacom->data;
>> @@ -753,6 +785,8 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
>>
>> if (len == WACOM_PKGLEN_TPC1FG || data[0] == WACOM_REPORT_TPC1FG)
>> return wacom_tpc_single_touch(wacom, len);
>> + else if (data[0] == WACOM_REPORT_TPC2FG)
>> + return wacom_tpc_mt_touch(wacom);
>> else if (data[0] == WACOM_REPORT_PENABLED)
>> return wacom_tpc_pen(wacom);
>>
>> @@ -979,7 +1013,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
>> {
>>
>> /* touch device found but size is not defined. use default */
>> - if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) {
>> + if (features->device_type == BTN_TOOL_FINGER && !features->x_max) {
>> features->x_max = 1023;
>> features->y_max = 1023;
>> }
>> @@ -991,7 +1025,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
>>
>> /* quirks for bamboo touch */
>> if (features->type == BAMBOO_PT &&
>> - features->device_type == BTN_TOOL_TRIPLETAP) {
>> + features->device_type == BTN_TOOL_DOUBLETAP) {
>> features->x_max <<= 5;
>> features->y_max <<= 5;
>> features->x_fuzz <<= 5;
>> @@ -1127,28 +1161,31 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
>> break;
>>
>> case TABLETPC2FG:
>> - if (features->device_type == BTN_TOOL_TRIPLETAP) {
>> - __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
>> - input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
>> + if (features->device_type == BTN_TOOL_DOUBLETAP) {
>> + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
>> +
>> + input_mt_init_slots(input_dev, 2);
>> + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
>> + 0, MT_TOOL_MAX, 0, 0);
>> + input_set_abs_params(input_dev, ABS_MT_POSITION_X,
>> + 0, features->x_max, 0, 0);
>> + input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
>> + 0, features->y_max, 0, 0);
>> }
>> /* fall through */
>>
>> case TABLETPC:
>> __clear_bit(ABS_MISC, input_dev->absbit);
>>
>> - if (features->device_type == BTN_TOOL_DOUBLETAP ||
>> - features->device_type == BTN_TOOL_TRIPLETAP) {
>> + if (features->device_type != BTN_TOOL_PEN) {
>> input_abs_set_res(input_dev, ABS_X,
>> wacom_calculate_touch_res(features->x_max,
>> features->x_phy));
>> input_abs_set_res(input_dev, ABS_Y,
>> wacom_calculate_touch_res(features->y_max,
>> features->y_phy));
>> - }
>> -
>> - if (features->device_type != BTN_TOOL_PEN)
>> break; /* no need to process stylus stuff */
>> -
>> + }
>> /* fall through */
>>
>> case PL:
>> @@ -1166,7 +1203,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
>> case BAMBOO_PT:
>> __clear_bit(ABS_MISC, input_dev->absbit);
>>
>> - if (features->device_type == BTN_TOOL_TRIPLETAP) {
>> + if (features->device_type == BTN_TOOL_DOUBLETAP) {
>> __set_bit(BTN_LEFT, input_dev->keybit);
>> __set_bit(BTN_FORWARD, input_dev->keybit);
>> __set_bit(BTN_BACK, input_dev->keybit);
>> --
>
> Thanks,
> Henrik
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-02-11 20:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-11 1:33 [PATCH 4/4] input - wacom: Support 2FGT in MT format Ping Cheng
2011-02-11 20:20 ` Henrik Rydberg
2011-02-11 20:35 ` Ping Cheng [this message]
2011-02-11 20:47 ` Henrik Rydberg
2011-02-11 21:07 ` Ping Cheng
2011-02-11 22:05 ` Henrik Rydberg
2011-02-11 23:47 ` Ping Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AANLkTimBPBDCBzw0fbDpLf8F7N_zG+ceKJAC9Li15g5P@mail.gmail.com \
--to=pinglinux@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).