* touchscreen stops working in 2.6.39
@ 2011-05-03 11:42 Mattias Säteri
2011-05-03 16:59 ` Chris Bagwell
0 siblings, 1 reply; 3+ messages in thread
From: Mattias Säteri @ 2011-05-03 11:42 UTC (permalink / raw)
To: pingc; +Cc: linux-input
[-- Attachment #1: Type: text/plain, Size: 457 bytes --]
Hi,
on an HP Touchsmart tm2 laptop with a wacom touchscreen, the
touchscreen stopped working with the 2.6.39 kernel. The pen still
works, but not touching the screen with a finger. However, doing '#
cat /dev/input/mouse0' and touching the screen with my finger outputs
characters to the console.
I have attached dmesg output, perhaps it can help. Please let me know
if there is anything I can do to help with this.
Regards,
Mattias Säteri
[-- Attachment #2: dmesg_39_rc2 --]
[-- Type: application/octet-stream, Size: 65422 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-rc2 (root@vargen) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP Sat Apr 9 12:25:43 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc2 root=UUID=50d46ec5-7dfc-4424-a990-b0f22e2e9941 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009b63f000 (usable)
[ 0.000000] BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved)
[ 0.000000] BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable)
[ 0.000000] BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP TouchSmart tm2 Notebook PC /1486, BIOS F.14 08/31/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x158000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FE0000000 write-back
[ 0.000000] 3 base 09C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 09B800000 mask FFF800000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 158000000 mask FF8000000 uncachable
[ 0.000000] 7 base 160000000 mask FE0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000009b800000
[ 0.000000] 0000000000 - 009b800000 page 2M
[ 0.000000] kernel direct mapping tables up to 9b800000 @ 9b63b000-9b63f000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000158000000
[ 0.000000] 0100000000 - 0158000000 page 2M
[ 0.000000] kernel direct mapping tables up to 158000000 @ 157ff9000-158000000
[ 0.000000] RAMDISK: 2ffe5000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000009b7fe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009b7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009b7e9000 0FA80 (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009b75f000 00040
[ 0.000000] ACPI: ASF! 000000009b7fd000 000A5 (v32 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009b7fb000 00038 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009b7fa000 0008C (v02 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009b7f9000 0003C (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117)
[ 0.000000] ACPI: BOOT 000000009b7e4000 00028 (v01 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117)
[ 0.000000] ACPI: ASPT 000000009b7e1000 00034 (v04 HP SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000009b7de000 01A8F (v01 AmdRef AmdTabl 00001000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000158000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000158000000
[ 0.000000] NODE_DATA [0000000157ffb000 - 0000000157ffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880153800000-ffff880156ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00158000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0009b63f
[ 0.000000] 0: 0x0009b7ff -> 0x0009b800
[ 0.000000] 0: 0x00100000 -> 0x00158000
[ 0.000000] On node 0 totalpages: 996813
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 618104 pages, LIFO batch:31
[ 0.000000] Normal zone: 4928 pages used for memmap
[ 0.000000] Normal zone: 355520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000
[ 0.000000] PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000
[ 0.000000] PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000
[ 0.000000] PM: Registered nosave memory: 000000009b800000 - 00000000a0000000
[ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880157c00000 s84672 r8192 d21824 u262144
[ 0.000000] pcpu-alloc: s84672 r8192 d21824 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 977544
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-rc2 root=UUID=50d46ec5-7dfc-4424-a990-b0f22e2e9941 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3718360k/5636096k available (5886k kernel code, 1648844k absent, 268892k reserved, 5073k data, 980k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 1329.926 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.85 BogoMIPS (lpj=13299260)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.000046] Security Framework initialized
[ 0.000067] AppArmor: AppArmor initialized
[ 0.000632] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002478] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003262] Mount-cache hash table entries: 256
[ 0.003435] Initializing cgroup subsys ns
[ 0.003441] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003445] Initializing cgroup subsys cpuacct
[ 0.003451] Initializing cgroup subsys memory
[ 0.003461] Initializing cgroup subsys devices
[ 0.003464] Initializing cgroup subsys freezer
[ 0.003467] Initializing cgroup subsys net_cls
[ 0.003504] CPU: Physical Processor ID: 0
[ 0.003506] CPU: Processor Core ID: 0
[ 0.003514] mce: CPU supports 9 MCE banks
[ 0.003527] CPU0: Thermal monitoring handled by SMI
[ 0.003538] using mwait in idle threads.
[ 0.007011] ACPI: Core revision 20110316
[ 0.043386] ftrace: allocating 22271 entries in 88 pages
[ 0.053887] Setting APIC routing to flat
[ 0.054251] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.154137] CPU0: Intel(R) Core(TM) i5 CPU U 470 @ 1.33GHz stepping 05
[ 0.267401] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.267411] ... version: 3
[ 0.267413] ... bit width: 48
[ 0.267414] ... generic registers: 4
[ 0.267416] ... value mask: 0000ffffffffffff
[ 0.267418] ... max period: 000000007fffffff
[ 0.267420] ... fixed-purpose events: 3
[ 0.267422] ... event mask: 000000070000000f
[ 0.267685] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.267797] Booting Node 0, Processors #1
[ 0.267802] smpboot cpu 1: start_ip = 98000
[ 0.427239] CPU1: Thermal monitoring handled by SMI
[ 0.447331] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.447470] #2
[ 0.447472] smpboot cpu 2: start_ip = 98000
[ 0.607019] CPU2: Thermal monitoring handled by SMI
[ 0.627110] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.627247] #3
[ 0.627249] smpboot cpu 3: start_ip = 98000
[ 0.786801] CPU3: Thermal monitoring handled by SMI
[ 0.806883] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.806935] Brought up 4 CPUs
[ 0.806938] Total of 4 processors activated (10639.83 BogoMIPS).
[ 0.809720] devtmpfs: initialized
[ 0.809891] PM: Registering ACPI NVS region at 9b6bf000 (1048576 bytes)
[ 0.811174] print_constraints: dummy:
[ 0.811205] Time: 12:40:15 Date: 04/09/11
[ 0.811250] NET: Registered protocol family 16
[ 0.811369] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.811373] ACPI: bus type pci registered
[ 0.811471] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.811475] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.863056] PCI: Using configuration type 1 for base access
[ 0.864007] bio: create slab <bio-0> at 0
[ 0.867890] ACPI: EC: Look up EC in DSDT
[ 0.871754] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.926703] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.932895] ACPI: SSDT 000000009b691c18 0037C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.933814] ACPI: Dynamic OEM Table Load:
[ 0.933818] ACPI: SSDT (null) 0037C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.934093] ACPI: SSDT 000000009b68f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.934983] ACPI: Dynamic OEM Table Load:
[ 0.934987] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.986997] ACPI: SSDT 000000009b690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.988023] ACPI: Dynamic OEM Table Load:
[ 0.988027] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.016737] ACPI: SSDT 000000009b68ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.017667] ACPI: Dynamic OEM Table Load:
[ 1.017671] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.053710] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 1.835812] ACPI: Interpreter enabled
[ 1.835817] ACPI: (supports S0 S3 S4 S5)
[ 1.835875] ACPI: Using IOAPIC for interrupt routing
[ 1.837059] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.966551] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 1.968926] ACPI: Power Resource [FN00] (on)
[ 1.969713] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 2.005779] ACPI: No dock devices found.
[ 2.005782] HEST: Table not found.
[ 2.005786] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.006312] \_SB_.PCI0:_OSC invalid UUID
[ 2.006315] _OSC request data:1 8 1f
[ 2.006320] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 2.007190] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 2.007193] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 2.007197] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 2.007201] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
[ 2.007216] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 2.007266] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 2.007303] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.007308] pci 0000:00:01.0: PME# disabled
[ 2.007326] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 2.007342] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 2.007351] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 2.007358] pci 0000:00:02.0: reg 20: [io 0x4050-0x4057]
[ 2.007430] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 2.007459] pci 0000:00:16.0: reg 10: [mem 0xc4506100-0xc450610f 64bit]
[ 2.007534] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.007540] pci 0000:00:16.0: PME# disabled
[ 2.007582] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 2.007886] pci 0000:00:1a.0: reg 10: [mem 0xc4505c00-0xc4505fff]
[ 2.009541] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.009546] pci 0000:00:1a.0: PME# disabled
[ 2.009574] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 2.009592] pci 0000:00:1b.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit]
[ 2.009657] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.009662] pci 0000:00:1b.0: PME# disabled
[ 2.009685] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 2.009749] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.009754] pci 0000:00:1c.0: PME# disabled
[ 2.009778] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 2.009842] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 2.009848] pci 0000:00:1c.1: PME# disabled
[ 2.009890] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 2.010178] pci 0000:00:1d.0: reg 10: [mem 0xc4505800-0xc4505bff]
[ 2.011829] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.011835] pci 0000:00:1d.0: PME# disabled
[ 2.011858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 2.011924] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 2.012057] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 2.012085] pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f]
[ 2.012097] pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f]
[ 2.012109] pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047]
[ 2.012121] pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b]
[ 2.012133] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f]
[ 2.012146] pci 0000:00:1f.2: reg 24: [mem 0xc4505000-0xc45057ff]
[ 2.012194] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.012199] pci 0000:00:1f.2: PME# disabled
[ 2.012223] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 2.012241] pci 0000:00:1f.3: reg 10: [mem 0xc4506000-0xc45060ff 64bit]
[ 2.012266] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 2.012308] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 2.012335] pci 0000:00:1f.6: reg 10: [mem 0xc4504000-0xc4504fff 64bit]
[ 2.012457] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
[ 2.012479] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.012497] pci 0000:01:00.0: reg 18: [mem 0xc4400000-0xc441ffff 64bit]
[ 2.012509] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff]
[ 2.012531] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 2.012560] pci 0000:01:00.0: supports D1 D2
[ 2.012590] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[ 2.012612] pci 0000:01:00.1: reg 10: [mem 0xc4420000-0xc4423fff 64bit]
[ 2.012688] pci 0000:01:00.1: supports D1 D2
[ 2.012723] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.012727] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 2.012731] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
[ 2.012736] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.012803] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 2.012823] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
[ 2.012855] pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 2.012876] pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 2.012932] pci 0000:02:00.0: supports D1 D2
[ 2.012934] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.012941] pci 0000:02:00.0: PME# disabled
[ 2.012984] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.012989] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 2.012993] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
[ 2.013000] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 2.013101] pci 0000:03:00.0: [14e4:4727] type 0 class 0x000280
[ 2.013129] pci 0000:03:00.0: reg 10: [mem 0xc2400000-0xc2403fff 64bit]
[ 2.013234] pci 0000:03:00.0: supports D1 D2
[ 2.013279] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 2.013284] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 2.013289] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
[ 2.013296] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 2.013365] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 2.013371] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.013376] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.013383] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.013387] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 2.013390] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 2.013393] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 2.013396] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[ 2.013418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.013634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 2.013689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 2.013797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 2.013854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 2.013988] \_SB_.PCI0:_OSC invalid UUID
[ 2.013990] _OSC request data:1 1f 1f
[ 2.013996] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 2.014042] \_SB_.PCI0:_OSC invalid UUID
[ 2.014044] _OSC request data:1 0 1d
[ 2.014047] Unable to assume _OSC PCIe control. Disabling ASPM
[ 2.021900] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 2.021986] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 2.022014] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 2.022043] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 2.022068] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 2.022092] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 2.022117] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 2.022162] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 2.022165] Unable to assume _OSC PCIe control. Disabling ASPM
[ 2.022453] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 2.022514] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 2.022572] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 2.022629] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 2.022686] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 2.022744] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.022802] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 2.022860] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.022982] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.022993] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 2.022999] vgaarb: loaded
[ 2.023138] SCSI subsystem initialized
[ 2.023203] libata version 3.00 loaded.
[ 2.023254] usbcore: registered new interface driver usbfs
[ 2.023266] usbcore: registered new interface driver hub
[ 2.023296] usbcore: registered new device driver usb
[ 2.023699] wmi: Mapper loaded
[ 2.023701] PCI: Using ACPI for IRQ routing
[ 2.023705] PCI: pci_cache_line_size set to 64 bytes
[ 2.023795] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 2.023798] reserve RAM buffer: 000000009b63f000 - 000000009bffffff
[ 2.023801] reserve RAM buffer: 000000009b800000 - 000000009bffffff
[ 2.023921] NetLabel: Initializing
[ 2.023923] NetLabel: domain hash size = 128
[ 2.023925] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.023939] NetLabel: unlabeled traffic allowed by default
[ 2.023982] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.023990] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.026016] Switching to clocksource hpet
[ 2.033548] AppArmor: AppArmor Filesystem Enabled
[ 2.033587] pnp: PnP ACPI init
[ 2.033605] ACPI: bus type pnp registered
[ 2.034112] pnp 00:00: [bus 00-fe]
[ 2.034116] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 2.034119] pnp 00:00: [io 0x0cf8-0x0cff]
[ 2.034121] pnp 00:00: [io 0x0d00-0xffff window]
[ 2.034124] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 2.034127] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 2.034129] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 2.034132] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 2.034134] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 2.034137] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 2.034139] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 2.034142] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 2.034145] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 2.034147] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 2.034150] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 2.034152] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 2.034155] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 2.034158] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 2.034160] pnp 00:00: [mem 0xa0000000-0xfeafffff window]
[ 2.034163] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 2.034297] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 2.034394] pnp 00:01: [io 0x0000-0x001f]
[ 2.034396] pnp 00:01: [io 0x0081-0x0091]
[ 2.034399] pnp 00:01: [io 0x0093-0x009f]
[ 2.034401] pnp 00:01: [io 0x00c0-0x00df]
[ 2.034404] pnp 00:01: [dma 4]
[ 2.034436] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.034448] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 2.034481] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.034626] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 2.034661] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.034674] pnp 00:04: [io 0x00f0]
[ 2.034690] pnp 00:04: [irq 13]
[ 2.034720] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.034734] pnp 00:05: [io 0x002e-0x002f]
[ 2.034737] pnp 00:05: [io 0x004e-0x004f]
[ 2.034739] pnp 00:05: [io 0x0061]
[ 2.034741] pnp 00:05: [io 0x0063]
[ 2.034743] pnp 00:05: [io 0x0065]
[ 2.034745] pnp 00:05: [io 0x0067]
[ 2.034750] pnp 00:05: [io 0x0070]
[ 2.034752] pnp 00:05: [io 0x0080]
[ 2.034754] pnp 00:05: [io 0x0092]
[ 2.034756] pnp 00:05: [io 0x00b2-0x00b3]
[ 2.034759] pnp 00:05: [io 0x0680-0x069f]
[ 2.034761] pnp 00:05: [io 0x0800-0x080f]
[ 2.034763] pnp 00:05: [io 0x0810-0x0813]
[ 2.034765] pnp 00:05: [io 0xffff]
[ 2.034767] pnp 00:05: [io 0x0400-0x047f]
[ 2.034770] pnp 00:05: [io 0x0500-0x0501]
[ 2.034772] pnp 00:05: [io 0x0700-0x077f]
[ 2.034774] pnp 00:05: [io 0x164e-0x164f]
[ 2.034796] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
[ 2.034863] system 00:05: [io 0x0680-0x069f] has been reserved
[ 2.034867] system 00:05: [io 0x0800-0x080f] has been reserved
[ 2.034870] system 00:05: [io 0x0810-0x0813] has been reserved
[ 2.034873] system 00:05: [io 0xffff] has been reserved
[ 2.034876] system 00:05: [io 0x0400-0x047f] has been reserved
[ 2.034879] system 00:05: [io 0x0500-0x0501] has been reserved
[ 2.034883] system 00:05: [io 0x0700-0x077f] has been reserved
[ 2.034887] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.034899] pnp 00:06: [io 0x0070-0x0077]
[ 2.034906] pnp 00:06: [irq 8]
[ 2.034937] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.034950] pnp 00:07: [io 0x0060]
[ 2.034952] pnp 00:07: [io 0x0064]
[ 2.034959] pnp 00:07: [irq 1]
[ 2.034990] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 2.035005] pnp 00:08: [irq 12]
[ 2.035043] pnp 00:08: Plug and Play ACPI device, IDs SYN1e2d SYN1e00 SYN0002 PNP0f13 (active)
[ 2.035210] pnp 00:09: [irq 23]
[ 2.035269] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 2.035287] Switched to NOHz mode on CPU #0
[ 2.035379] Switched to NOHz mode on CPU #3
[ 2.035389] Switched to NOHz mode on CPU #1
[ 2.035391] Switched to NOHz mode on CPU #2
[ 2.035565] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 2.035568] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 2.035571] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 2.035573] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 2.035576] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 2.035578] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 2.035581] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 2.035583] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 2.035586] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 2.035588] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 2.035590] pnp 00:0a: [mem 0xc4600000-0xc4600fff]
[ 2.035679] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.035682] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 2.035686] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.035689] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.035693] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.035696] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.035700] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.035703] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.035707] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 2.035710] system 00:0a: [mem 0xc4600000-0xc4600fff] has been reserved
[ 2.035714] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.036014] pnp 00:0b: [bus ff]
[ 2.036096] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 2.036138] pnp: PnP ACPI: found 12 devices
[ 2.036141] ACPI: ACPI bus type pnp unregistered
[ 2.042257] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 2.042304] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
[ 2.042308] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 2.042312] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 2.042317] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff]
[ 2.042321] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.042327] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 2.042330] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 2.042336] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff]
[ 2.042342] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 2.042350] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 2.042354] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 2.042360] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff]
[ 2.042365] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 2.042372] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 2.042374] pci 0000:00:1e.0: bridge window [io disabled]
[ 2.042380] pci 0000:00:1e.0: bridge window [mem disabled]
[ 2.042385] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 2.042409] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.042414] pci 0000:00:01.0: setting latency timer to 64
[ 2.042427] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.042432] pci 0000:00:1c.0: setting latency timer to 64
[ 2.042440] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.042445] pci 0000:00:1c.1: setting latency timer to 64
[ 2.042453] pci 0000:00:1e.0: setting latency timer to 64
[ 2.042459] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.042462] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.042464] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.042467] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[ 2.042470] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 2.042473] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
[ 2.042476] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.042479] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 2.042482] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
[ 2.042485] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 2.042488] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 2.042491] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
[ 2.042494] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 2.042497] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 2.042500] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 2.042503] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.042505] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff]
[ 2.042549] NET: Registered protocol family 2
[ 2.042744] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.044085] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.047229] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.047626] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.047629] TCP reno registered
[ 2.047643] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.047677] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.047839] NET: Registered protocol family 1
[ 2.047865] pci 0000:00:02.0: Boot video device
[ 2.086061] PCI: CLS 64 bytes, default 64
[ 2.086128] Trying to unpack rootfs image as initramfs...
[ 6.001500] Freeing initrd memory: 131116k freed
[ 6.042927] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 6.042935] Placing 64MB software IO TLB between ffff88009763b000 - ffff88009b63b000
[ 6.042939] software IO TLB at phys 0x9763b000 - 0x9b63b000
[ 6.042979] Simple Boot Flag at 0x44 set to 0x1
[ 6.043529] audit: initializing netlink socket (disabled)
[ 6.043545] type=2000 audit(1302352819.910:1): initialized
[ 6.076494] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 6.079456] VFS: Disk quotas dquot_6.5.2
[ 6.079526] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 6.080331] fuse init (API version 7.16)
[ 6.080438] msgmni has been set to 7518
[ 6.080706] alg: No test for stdrng (krng)
[ 6.080771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 6.080776] io scheduler noop registered
[ 6.080778] io scheduler deadline registered
[ 6.080829] io scheduler cfq registered (default)
[ 6.081045] pcieport 0000:00:01.0: setting latency timer to 64
[ 6.081087] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 6.081275] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.081303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 6.081390] intel_idle: MWAIT substates: 0x1120
[ 6.081392] intel_idle: v0.4 model 0x25
[ 6.081394] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 6.161215] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.161346] ACPI: AC Adapter [AC] (on-line)
[ 6.161632] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 6.161665] ACPI: Lid Switch [LID0]
[ 6.161709] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 6.161715] ACPI: Power Button [PWRB]
[ 6.161760] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.161764] ACPI: Power Button [PWRF]
[ 6.161834] ACPI: Fan [FAN0] (on)
[ 6.162076] ACPI: acpi_idle yielding to intel_idle
[ 6.490759] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.490762] ACPI: Thermal Zone [TZ00] (63 C)
[ 6.580643] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.580651] ACPI: Thermal Zone [TZ01] (45 C)
[ 6.660544] thermal LNXTHERM:02: registered as thermal_zone2
[ 6.660547] ACPI: Thermal Zone [TZ02] (78 C)
[ 6.660607] ERST: Table is not found!
[ 6.660692] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.750553] Linux agpgart interface v0.103
[ 6.751662] brd: module loaded
[ 6.752186] loop: module loaded
[ 6.752717] Fixed MDIO Bus: probed
[ 6.752753] PPP generic driver version 2.4.2
[ 6.752789] tun: Universal TUN/TAP device driver, 1.6
[ 6.752791] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.752867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.752892] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.752918] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.752923] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.752971] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.770421] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.774345] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 6.774367] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc4505c00
[ 6.790336] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.790508] hub 1-0:1.0: USB hub found
[ 6.790514] hub 1-0:1.0: 3 ports detected
[ 6.790593] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.790610] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.790614] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.790660] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.810369] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.814284] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 6.814302] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc4505800
[ 6.830285] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.830432] hub 2-0:1.0: USB hub found
[ 6.830437] hub 2-0:1.0: 3 ports detected
[ 6.830501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.830515] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.830600] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 6.837674] i8042: Detected active multiplexing controller, rev 1.1
[ 6.840283] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.840292] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 6.840304] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 6.840307] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 6.840310] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 6.840479] mousedev: PS/2 mouse device common for all mice
[ 6.840622] rtc_cmos 00:06: RTC can wake from S4
[ 6.840760] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 6.840793] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 6.840888] device-mapper: uevent: version 1.0.3
[ 6.840974] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 6.841036] device-mapper: multipath: version 1.3.0 loaded
[ 6.841042] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 6.841240] cpuidle: using governor ladder
[ 6.841424] cpuidle: using governor menu
[ 6.841427] EFI Variables Facility v0.08 2004-May-17
[ 6.841745] TCP cubic registered
[ 6.841897] NET: Registered protocol family 10
[ 6.842535] NET: Registered protocol family 17
[ 6.842553] Registering the dns_resolver key type
[ 6.860705] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359)
[ 6.860727] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff88015118e168), AE_NOT_FOUND (20110316/psparse-536)
[ 6.860752] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff88015118e050), AE_NOT_FOUND (20110316/psparse-536)
[ 6.876893] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 7.010493] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359)
[ 7.010516] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff88015118e168), AE_NOT_FOUND (20110316/psparse-536)
[ 7.010540] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff88015118e050), AE_NOT_FOUND (20110316/psparse-536)
[ 7.010559] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff88015118e140), AE_NOT_FOUND (20110316/psparse-536)
[ 7.040118] Refined TSC clocksource calibration: 1329.999 MHz.
[ 7.040128] Switching to clocksource tsc
[ 7.110016] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 7.120371] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359)
[ 7.120383] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff88015118e168), AE_NOT_FOUND (20110316/psparse-536)
[ 7.120395] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff88015118e050), AE_NOT_FOUND (20110316/psparse-536)
[ 7.120405] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PPC] (Node ffff88015118e398), AE_NOT_FOUND (20110316/psparse-536)
[ 7.229967] ACPI Error: [NPSS] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359)
[ 7.229979] ACPI Error: Method parse/execution failed [\_PR_.CPU0.PPC_] (Node ffff88015118e168), AE_NOT_FOUND (20110316/psparse-536)
[ 7.229991] ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff88015118e050), AE_NOT_FOUND (20110316/psparse-536)
[ 7.230001] ACPI Error: Method parse/execution failed [\_PR_.CPU3._PPC] (Node ffff88015118e2f8), AE_NOT_FOUND (20110316/psparse-536)
[ 7.230377] PM: Hibernation image not present or could not be loaded.
[ 7.230389] registered taskstats version 1
[ 7.231075] Magic number: 7:68:683
[ 7.231249] rtc_cmos 00:06: setting system clock to 2011-04-09 12:40:21 UTC (1302352821)
[ 7.231253] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 7.231255] EDD information not available.
[ 7.260721] hub 1-1:1.0: USB hub found
[ 7.260936] hub 1-1:1.0: 6 ports detected
[ 7.379691] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 7.530392] hub 2-1:1.0: USB hub found
[ 7.530608] hub 2-1:1.0: 8 ports detected
[ 7.609659] usb 1-1.3: new full speed USB device number 3 using ehci_hcd
[ 7.799279] usb 1-1.4: new full speed USB device number 4 using ehci_hcd
[ 7.809404] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 7.809415] ACPI: Battery Slot [BAT0] (battery present)
[ 7.811877] Freeing unused kernel memory: 980k freed
[ 7.812093] Write protecting the kernel read-only data: 10240k
[ 7.813499] Freeing unused kernel memory: 240k freed
[ 7.820341] Freeing unused kernel memory: 1528k freed
[ 7.845837] udev[71]: starting version 163
[ 7.986248] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 7.986513] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 7.987912] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 7.988156] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 7.999001] usb 2-1.5: new full speed USB device number 3 using ehci_hcd
[ 8.001590] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.001628] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.001713] r8169 0000:02:00.0: setting latency timer to 64
[ 8.001791] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 8.002738] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90011122000, 1c:c1:de:af:99:ce, XID 083000c0 IRQ 41
[ 8.007130] ahci 0000:00:1f.2: version 3.0
[ 8.007164] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.007236] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 8.007297] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 8.007302] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
[ 8.007308] ahci 0000:00:1f.2: setting latency timer to 64
[ 8.007920] scsi0 : ahci
[ 8.008086] scsi1 : ahci
[ 8.008194] scsi2 : ahci
[ 8.008282] scsi3 : ahci
[ 8.008447] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 42
[ 8.008451] ata2: DUMMY
[ 8.008453] ata3: DUMMY
[ 8.008455] ata4: DUMMY
[ 8.164893] usbcore: registered new interface driver usbhid
[ 8.164897] usbhid: USB HID core driver
[ 8.188969] usb 2-1.6: new high speed USB device number 4 using ehci_hcd
[ 8.758033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.760382] ata1.00: ATA-8: WDC WD3200BEKT-60V5T1, 12.01A12, max UDMA/100
[ 8.760388] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.762882] ata1.00: configured for UDMA/100
[ 8.763071] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5
[ 8.763299] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.763411] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 8.763527] sd 0:0:0:0: [sda] Write Protect is off
[ 8.763532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.763581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.832725] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 8.833251] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.867355] [drm] Initialized drm 1.1.0 20060810
[ 8.907148] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.907154] i915 0000:00:02.0: setting latency timer to 64
[ 8.966677] mtrr: no more MTRRs available
[ 8.966682] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 8.966939] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 8.966945] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.966948] [drm] Driver supports precise vblank timestamp query.
[ 9.437331] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.437337] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 9.712057] Console: switching to colour frame buffer device 160x50
[ 9.715416] fb0: inteldrmfb frame buffer device
[ 9.715418] drm: registered panic notifier
[ 9.716060] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 9.716580] acpi device:02: registered as cooling_device5
[ 9.716871] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 9.716914] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.716938] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 9.766935] acpi device:0b: registered as cooling_device6
[ 9.767260] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input5
[ 9.767305] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 9.767507] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.161362] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 12.255895] Adding 8786940k swap on /dev/sda6. Priority:-1 extents:1 across:8786940k
[ 12.904066] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 13.033566] udev[332]: starting version 163
[ 14.305302] type=1400 audit(1302345628.569:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=527 comm="apparmor_parser"
[ 14.305380] type=1400 audit(1302345628.569:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=527 comm="apparmor_parser"
[ 14.305441] type=1400 audit(1302345628.569:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=527 comm="apparmor_parser"
[ 14.368829] type=1400 audit(1302345628.629:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=566 comm="apparmor_parser"
[ 14.368905] type=1400 audit(1302345628.629:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=566 comm="apparmor_parser"
[ 14.368963] type=1400 audit(1302345628.629:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=566 comm="apparmor_parser"
[ 14.805690] IPv4 FIB: Using LC-trie version 0.409
[ 17.252300] cfg80211: Calling CRDA to update world regulatory domain
[ 17.478187] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[ 17.478218] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 17.479069] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 17.719941] input: Wacom ISDv4 E3 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
[ 17.748103] Bluetooth: Core ver 2.16
[ 17.748136] NET: Registered protocol family 31
[ 17.748139] Bluetooth: HCI device and connection manager initialized
[ 17.748143] Bluetooth: HCI socket layer initialized
[ 17.748146] Bluetooth: L2CAP socket layer initialized
[ 17.748368] Bluetooth: SCO socket layer initialized
[ 17.790888] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 17.791360] usbcore: registered new interface driver btusb
[ 18.240916] lp: driver loaded but no devices found
[ 18.397135] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 18.467330] hp_accel: laptop model unknown, using default axes configuration
[ 18.497387] lis3lv02d: 8 bits sensor found
[ 18.536376] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[ 18.536571] Registered led device: hp::hddprotect
[ 18.536597] hp_accel: driver loaded
[ 18.722063] input: Wacom ISDv4 E3 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input9
[ 19.074278] cfg80211: World regulatory domain updated:
[ 19.074282] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.074289] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.074292] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.074295] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.074298] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.074301] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.206516] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.206521] Bluetooth: BNEP filters: protocol multicast
[ 19.718418] usbcore: registered new interface driver wacom
[ 19.718429] wacom: v1.52:USB Wacom tablet driver
[ 19.785750] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[ 19.822010] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 20.043298] type=1400 audit(1302345634.309:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=809 comm="apparmor_parser"
[ 20.043375] type=1400 audit(1302345634.309:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=809 comm="apparmor_parser"
[ 20.043435] type=1400 audit(1302345634.309:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=809 comm="apparmor_parser"
[ 20.101412] Bluetooth: RFCOMM TTY layer initialized
[ 20.101422] Bluetooth: RFCOMM socket layer initialized
[ 20.101425] Bluetooth: RFCOMM ver 1.11
[ 20.326370] type=1400 audit(1302345634.599:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=819 comm="apparmor_parser"
[ 20.354796] type=1400 audit(1302345634.629:12): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=808 comm="apparmor_parser"
[ 20.533302] type=1400 audit(1302345634.799:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=812 comm="apparmor_parser"
[ 20.533556] type=1400 audit(1302345634.799:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=812 comm="apparmor_parser"
[ 20.787645] type=1400 audit(1302345635.059:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=821 comm="apparmor_parser"
[ 21.308666] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
[ 21.314405] brcmsmac 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 21.314415] brcmsmac 0000:03:00.0: setting latency timer to 64
[ 21.716347] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716355] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716360] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716366] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716370] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716376] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716380] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716386] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716391] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716397] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716401] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716406] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716410] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716414] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716417] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716421] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716424] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716428] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716431] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716435] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716438] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716442] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716445] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716449] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716453] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716457] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.716460] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 21.716464] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 21.871557] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 21.872954] cfg80211: Calling CRDA for country: US
[ 21.879876] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 21.879886] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.879892] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 21.879898] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.879904] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 21.879911] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.879916] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 21.879923] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.879965] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 21.879972] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.879977] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 21.879984] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.879989] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 21.879996] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.880001] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 21.880008] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.880013] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 21.880020] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.880025] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 21.880032] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.880037] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 21.880044] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 21.880049] cfg80211: Disabling freq 2467 MHz
[ 21.880053] cfg80211: Disabling freq 2472 MHz
[ 21.880056] cfg80211: Disabling freq 2484 MHz
[ 21.880062] cfg80211: Regulatory domain changed to country: US
[ 21.880066] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.880073] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 21.880079] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 21.880086] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.880092] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.880098] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.880105] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 21.904151] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 21.904269] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 21.904307] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 22.281909] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 22.282044] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 22.282350] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 22.282481] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 22.282515] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 22.323037] r8169 0000:02:00.0: eth0: link down
[ 22.323646] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.518242] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.034753] type=1400 audit(1302345637.309:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1034 comm="apparmor_parser"
[ 23.034934] type=1400 audit(1302345637.309:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1034 comm="apparmor_parser"
[ 23.272704] ppdev: user-space parallel port driver
[ 24.911001] wlan0: authenticate with 00:21:27:e7:d5:dc (try 1)
[ 24.913316] wlan0: authenticated
[ 24.913351] wlan0: associate with 00:21:27:e7:d5:dc (try 1)
[ 24.917231] wlan0: RX AssocResp from 00:21:27:e7:d5:dc (capab=0x431 status=0 aid=2)
[ 24.917235] wlan0: associated
[ 24.918406] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.918531] cfg80211: Calling CRDA for country: SE
[ 24.923255] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923261] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923264] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923268] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923271] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923274] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923277] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923280] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923283] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923286] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923289] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923292] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923295] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923298] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923301] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923304] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923307] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923310] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923313] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923316] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923319] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923322] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923325] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923328] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923331] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 24.923334] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.923337] cfg80211: Disabling freq 2484 MHz
[ 24.923340] cfg80211: Regulatory domain changed to country: SE
[ 24.923342] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.923345] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.923348] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.923351] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.923354] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 25.071505] Intel AES-NI instructions are not detected.
[ 25.191156] padlock_aes: VIA PadLock not detected.
[ 31.591193] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 34.758734] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 34.978388] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 35.202917] wlan0: no IPv6 routers present
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: touchscreen stops working in 2.6.39
2011-05-03 11:42 touchscreen stops working in 2.6.39 Mattias Säteri
@ 2011-05-03 16:59 ` Chris Bagwell
2011-05-04 17:51 ` Mattias Säteri
0 siblings, 1 reply; 3+ messages in thread
From: Chris Bagwell @ 2011-05-03 16:59 UTC (permalink / raw)
To: Mattias Säteri; +Cc: pingc, linux-input
I believe all you need to do is upgrade your xf86-input-wacom to
latest version... or edit a config file to remap your touchscreen
device ("Finger") to xf86-input-evdev instead of xf86-input-wacom.
Your touchscreen reports multi-touch events now and that confuses
older xf86-input-wacom's.
Chris
2011/5/3 Mattias Säteri <mattias.sateri@gmail.com>:
> Hi,
>
> on an HP Touchsmart tm2 laptop with a wacom touchscreen, the
> touchscreen stopped working with the 2.6.39 kernel. The pen still
> works, but not touching the screen with a finger. However, doing '#
> cat /dev/input/mouse0' and touching the screen with my finger outputs
> characters to the console.
>
> I have attached dmesg output, perhaps it can help. Please let me know
> if there is anything I can do to help with this.
>
>
> Regards,
> Mattias Säteri
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: touchscreen stops working in 2.6.39
2011-05-03 16:59 ` Chris Bagwell
@ 2011-05-04 17:51 ` Mattias Säteri
0 siblings, 0 replies; 3+ messages in thread
From: Mattias Säteri @ 2011-05-04 17:51 UTC (permalink / raw)
To: Chris Bagwell; +Cc: pingc, linux-input
Yes, upgrading xf86-input-wacom solved the problem.
Thanks a lot,
Mattias
2011/5/3 Chris Bagwell <chris@cnpbagwell.com>:
> I believe all you need to do is upgrade your xf86-input-wacom to
> latest version... or edit a config file to remap your touchscreen
> device ("Finger") to xf86-input-evdev instead of xf86-input-wacom.
>
> Your touchscreen reports multi-touch events now and that confuses
> older xf86-input-wacom's.
>
> Chris
>
> 2011/5/3 Mattias Säteri <mattias.sateri@gmail.com>:
>> Hi,
>>
>> on an HP Touchsmart tm2 laptop with a wacom touchscreen, the
>> touchscreen stopped working with the 2.6.39 kernel. The pen still
>> works, but not touching the screen with a finger. However, doing '#
>> cat /dev/input/mouse0' and touching the screen with my finger outputs
>> characters to the console.
>>
>> I have attached dmesg output, perhaps it can help. Please let me know
>> if there is anything I can do to help with this.
>>
>>
>> Regards,
>> Mattias Säteri
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-05-04 17:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-03 11:42 touchscreen stops working in 2.6.39 Mattias Säteri
2011-05-03 16:59 ` Chris Bagwell
2011-05-04 17:51 ` Mattias Säteri
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).