From: Haojian Zhuang <haojian.zhuang@gmail.com>
To: Chao Xie <chao.xie@marvell.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, eric.y.miao@gmail.com,
linux-arm-kernel@lists.infradead.org, haojian.zhuang@marvell.com
Subject: Re: [PATCH V3 1/4] Input: pxa27x_keypad keep clock on as wakeup source
Date: Mon, 2 Apr 2012 17:37:05 +0800 [thread overview]
Message-ID: <CAN1soZyBPE3YExELmu5yHeMTWQf9Zs07v26F6Qz3ocKO+cXGFw@mail.gmail.com> (raw)
In-Reply-To: <1333246084-14110-1-git-send-email-chao.xie@marvell.com>
On Sun, Apr 1, 2012 at 10:08 AM, Chao Xie <chao.xie@marvell.com> wrote:
> When the keypad is used as wake up source, the clock can not
> be disabled. Or it can not detect key pressing.
> If the keypad is used as wake up source, when resume back,
> do not enable the clock and configure it again because the
> register content is retained.
>
> Signed-off-by: Chao Xie <chao.xie@marvell.com>
> ---
> drivers/input/keyboard/pxa27x_keypad.c | 33 ++++++++++++++++++++-----------
> 1 files changed, 21 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
> index 29fe1b2..b07771e 100644
> --- a/drivers/input/keyboard/pxa27x_keypad.c
> +++ b/drivers/input/keyboard/pxa27x_keypad.c
> @@ -399,7 +399,7 @@ static int pxa27x_keypad_open(struct input_dev *dev)
> struct pxa27x_keypad *keypad = input_get_drvdata(dev);
>
> /* Enable unit clock */
> - clk_enable(keypad->clk);
> + clk_prepare_enable(keypad->clk);
> pxa27x_keypad_config(keypad);
>
> return 0;
> @@ -410,7 +410,7 @@ static void pxa27x_keypad_close(struct input_dev *dev)
> struct pxa27x_keypad *keypad = input_get_drvdata(dev);
>
> /* Disable clock unit */
> - clk_disable(keypad->clk);
> + clk_disable_unprepare(keypad->clk);
> }
>
> #ifdef CONFIG_PM
> @@ -419,10 +419,14 @@ static int pxa27x_keypad_suspend(struct device *dev)
> struct platform_device *pdev = to_platform_device(dev);
> struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
>
> - clk_disable(keypad->clk);
> -
> + /*
> + * If the keypad is used a wake up source, clock can not be disabled.
> + * Or it can not detect the key pressing.
> + */
> if (device_may_wakeup(&pdev->dev))
> enable_irq_wake(keypad->irq);
> + else
> + clk_disable_unprepare(keypad->clk);
>
> return 0;
> }
> @@ -433,19 +437,24 @@ static int pxa27x_keypad_resume(struct device *dev)
> struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
> struct input_dev *input_dev = keypad->input_dev;
>
> - if (device_may_wakeup(&pdev->dev))
> + /*
> + * If the keypad is used as wake up source, the clock is not turned
> + * off. So do not need configure it again.
> + */
> + if (device_may_wakeup(&pdev->dev)) {
> disable_irq_wake(keypad->irq);
> + } else {
> + mutex_lock(&input_dev->mutex);
>
> - mutex_lock(&input_dev->mutex);
> + if (input_dev->users) {
> + /* Enable unit clock */
> + clk_prepare_enable(keypad->clk);
> + pxa27x_keypad_config(keypad);
> + }
>
> - if (input_dev->users) {
> - /* Enable unit clock */
> - clk_enable(keypad->clk);
> - pxa27x_keypad_config(keypad);
> + mutex_unlock(&input_dev->mutex);
> }
>
> - mutex_unlock(&input_dev->mutex);
> -
> return 0;
> }
>
> --
> 1.7.0.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Dmitry,
I just found that you're not looped in this mail thread. Could I merge
them into arch-pxa tree?
Best Regards
Haojian
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-04-02 9:37 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-01 2:08 [PATCH V3 1/4] Input: pxa27x_keypad keep clock on as wakeup source Chao Xie
2012-04-01 2:08 ` [PATCH V3 2/4] Input: pxa27x_keypad bug fix for direct_key_mask Chao Xie
2012-04-02 9:37 ` Haojian Zhuang
2012-04-01 2:08 ` [PATCH V3 3/4] Input: pxa27x_keypad direct key may be low active Chao Xie
2012-04-02 9:38 ` Haojian Zhuang
2012-04-01 2:08 ` [PATCH V3 4/4] Input: pxa27x_keypad add choice to set direct_key_mask Chao Xie
2012-04-02 9:38 ` Haojian Zhuang
2012-04-02 9:37 ` Haojian Zhuang [this message]
2012-04-27 9:04 ` [PATCH V3 1/4] Input: pxa27x_keypad keep clock on as wakeup source Haojian Zhuang
2012-10-28 8:39 ` Vasily Khoruzhick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAN1soZyBPE3YExELmu5yHeMTWQf9Zs07v26F6Qz3ocKO+cXGFw@mail.gmail.com \
--to=haojian.zhuang@gmail.com \
--cc=chao.xie@marvell.com \
--cc=dmitry.torokhov@gmail.com \
--cc=eric.y.miao@gmail.com \
--cc=haojian.zhuang@marvell.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).