* [PATCH] Input: wacom - cleanup multitouch code when touch_max is 2
@ 2014-05-29 20:03 Ping Cheng
2014-06-04 21:44 ` Jason Gerecke
0 siblings, 1 reply; 3+ messages in thread
From: Ping Cheng @ 2014-05-29 20:03 UTC (permalink / raw)
To: linux-input; +Cc: dmitry.torokhov, Ping Cheng
Historically we dealt with touch_max equals to 2 differently from
other MT devices. Now we use input_mt_*() to process all MT events,
as long as touch_max is greater than 1. So, there is no need to
take (touch_max == 2) as a special case any more.
Signed-off-by: Ping Cheng <pingc@wacom.com>
---
drivers/input/tablet/wacom_wac.c | 26 ++++++--------------------
1 file changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 977d05c..964db47 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1217,8 +1217,8 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
* a=(pi*r^2)/C.
*/
int a = data[5];
- int x_res = input_abs_get_res(input, ABS_X);
- int y_res = input_abs_get_res(input, ABS_Y);
+ int x_res = input_abs_get_res(input, ABS_MT_POSITION_X);
+ int y_res = input_abs_get_res(input, ABS_MT_POSITION_Y);
width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
height = width * y_res / x_res;
}
@@ -1587,7 +1587,7 @@ static void wacom_abs_set_axis(struct input_dev *input_dev,
input_abs_set_res(input_dev, ABS_X, features->x_resolution);
input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
} else {
- if (features->touch_max <= 2) {
+ if (features->touch_max == 1) {
input_set_abs_params(input_dev, ABS_X, 0,
features->x_max, features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_Y, 0,
@@ -1815,14 +1815,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
case MTTPC:
case MTTPC_B:
case TABLETPC2FG:
- if (features->device_type == BTN_TOOL_FINGER) {
- unsigned int flags = INPUT_MT_DIRECT;
-
- if (wacom_wac->features.type == TABLETPC2FG)
- flags = 0;
-
- input_mt_init_slots(input_dev, features->touch_max, flags);
- }
+ if ((features->device_type == BTN_TOOL_FINGER) && features->touch_max > 1)
+ input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_DIRECT);
/* fall through */
case TABLETPC:
@@ -1883,10 +1877,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
__set_bit(BTN_RIGHT, input_dev->keybit);
if (features->touch_max) {
- /* touch interface */
- unsigned int flags = INPUT_MT_POINTER;
-
- __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MAJOR,
@@ -1894,12 +1884,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MINOR,
0, features->y_max, 0, 0);
- } else {
- __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
- __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
- flags = 0;
}
- input_mt_init_slots(input_dev, features->touch_max, flags);
+ input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
} else {
/* buttons/keys only interface */
__clear_bit(ABS_X, input_dev->absbit);
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] Input: wacom - cleanup multitouch code when touch_max is 2
2014-05-29 20:03 [PATCH] Input: wacom - cleanup multitouch code when touch_max is 2 Ping Cheng
@ 2014-06-04 21:44 ` Jason Gerecke
2014-06-04 22:59 ` Jason Gerecke
0 siblings, 1 reply; 3+ messages in thread
From: Jason Gerecke @ 2014-06-04 21:44 UTC (permalink / raw)
To: Ping Cheng; +Cc: Linux Input, Dmitry Torokhov, Ping Cheng
On Thu, May 29, 2014 at 1:03 PM, Ping Cheng <pinglinux@gmail.com> wrote:
> Historically we dealt with touch_max equals to 2 differently from
> other MT devices. Now we use input_mt_*() to process all MT events,
> as long as touch_max is greater than 1. So, there is no need to
> take (touch_max == 2) as a special case any more.
>
> Signed-off-by: Ping Cheng <pingc@wacom.com>
> ---
> drivers/input/tablet/wacom_wac.c | 26 ++++++--------------------
> 1 file changed, 6 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
> index 977d05c..964db47 100644
> --- a/drivers/input/tablet/wacom_wac.c
> +++ b/drivers/input/tablet/wacom_wac.c
> @@ -1217,8 +1217,8 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
> * a=(pi*r^2)/C.
> */
> int a = data[5];
> - int x_res = input_abs_get_res(input, ABS_X);
> - int y_res = input_abs_get_res(input, ABS_Y);
> + int x_res = input_abs_get_res(input, ABS_MT_POSITION_X);
> + int y_res = input_abs_get_res(input, ABS_MT_POSITION_Y);
> width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
> height = width * y_res / x_res;
> }
> @@ -1587,7 +1587,7 @@ static void wacom_abs_set_axis(struct input_dev *input_dev,
> input_abs_set_res(input_dev, ABS_X, features->x_resolution);
> input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
> } else {
> - if (features->touch_max <= 2) {
> + if (features->touch_max == 1) {
> input_set_abs_params(input_dev, ABS_X, 0,
> features->x_max, features->x_fuzz, 0);
> input_set_abs_params(input_dev, ABS_Y, 0,
> @@ -1815,14 +1815,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
> case MTTPC:
> case MTTPC_B:
> case TABLETPC2FG:
> - if (features->device_type == BTN_TOOL_FINGER) {
> - unsigned int flags = INPUT_MT_DIRECT;
> -
> - if (wacom_wac->features.type == TABLETPC2FG)
> - flags = 0;
> -
> - input_mt_init_slots(input_dev, features->touch_max, flags);
> - }
> + if ((features->device_type == BTN_TOOL_FINGER) && features->touch_max > 1)
> + input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_DIRECT);
> /* fall through */
>
> case TABLETPC:
> @@ -1883,10 +1877,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
> __set_bit(BTN_RIGHT, input_dev->keybit);
>
> if (features->touch_max) {
> - /* touch interface */
> - unsigned int flags = INPUT_MT_POINTER;
> -
> - __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
> input_set_abs_params(input_dev,
> ABS_MT_TOUCH_MAJOR,
> @@ -1894,12 +1884,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
> input_set_abs_params(input_dev,
> ABS_MT_TOUCH_MINOR,
> 0, features->y_max, 0, 0);
> - } else {
> - __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
> - __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
> - flags = 0;
> }
> - input_mt_init_slots(input_dev, features->touch_max, flags);
> + input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
I think you want to use 'input_mt_init_slots(input_dev,
features->touch_max + 1, INPUT_MT_POINTER)' instead. This is one more
slot than necessary, but the number of slots is used in deciding which
of the BTN_TOOL_*TAP buttons the kernel will advertise. Our protocol
has the driver sending one more TAP than expected to differentiate
touch and pad (e.g. single-touch device needs DOUBLETAP and two-finger
touch needs TRIPLETAP). Adding one to the number of slots ensures a
high enough TAP is advertised.
Aside from that... Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....
> } else {
> /* buttons/keys only interface */
> __clear_bit(ABS_X, input_dev->absbit);
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] Input: wacom - cleanup multitouch code when touch_max is 2
2014-06-04 21:44 ` Jason Gerecke
@ 2014-06-04 22:59 ` Jason Gerecke
0 siblings, 0 replies; 3+ messages in thread
From: Jason Gerecke @ 2014-06-04 22:59 UTC (permalink / raw)
To: Ping Cheng; +Cc: Linux Input, Dmitry Torokhov, Ping Cheng
On Wed, Jun 4, 2014 at 2:44 PM, Jason Gerecke <killertofu@gmail.com> wrote:
> On Thu, May 29, 2014 at 1:03 PM, Ping Cheng <pinglinux@gmail.com> wrote:
>> Historically we dealt with touch_max equals to 2 differently from
>> other MT devices. Now we use input_mt_*() to process all MT events,
>> as long as touch_max is greater than 1. So, there is no need to
>> take (touch_max == 2) as a special case any more.
>>
>> Signed-off-by: Ping Cheng <pingc@wacom.com>
>> ---
>> drivers/input/tablet/wacom_wac.c | 26 ++++++--------------------
>> 1 file changed, 6 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
>> index 977d05c..964db47 100644
>> --- a/drivers/input/tablet/wacom_wac.c
>> +++ b/drivers/input/tablet/wacom_wac.c
>> @@ -1217,8 +1217,8 @@ static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
>> * a=(pi*r^2)/C.
>> */
>> int a = data[5];
>> - int x_res = input_abs_get_res(input, ABS_X);
>> - int y_res = input_abs_get_res(input, ABS_Y);
>> + int x_res = input_abs_get_res(input, ABS_MT_POSITION_X);
>> + int y_res = input_abs_get_res(input, ABS_MT_POSITION_Y);
>> width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
>> height = width * y_res / x_res;
>> }
>> @@ -1587,7 +1587,7 @@ static void wacom_abs_set_axis(struct input_dev *input_dev,
>> input_abs_set_res(input_dev, ABS_X, features->x_resolution);
>> input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
>> } else {
>> - if (features->touch_max <= 2) {
>> + if (features->touch_max == 1) {
>> input_set_abs_params(input_dev, ABS_X, 0,
>> features->x_max, features->x_fuzz, 0);
>> input_set_abs_params(input_dev, ABS_Y, 0,
>> @@ -1815,14 +1815,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>> case MTTPC:
>> case MTTPC_B:
>> case TABLETPC2FG:
>> - if (features->device_type == BTN_TOOL_FINGER) {
>> - unsigned int flags = INPUT_MT_DIRECT;
>> -
>> - if (wacom_wac->features.type == TABLETPC2FG)
>> - flags = 0;
>> -
>> - input_mt_init_slots(input_dev, features->touch_max, flags);
>> - }
>> + if ((features->device_type == BTN_TOOL_FINGER) && features->touch_max > 1)
>> + input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_DIRECT);
>> /* fall through */
>>
>> case TABLETPC:
>> @@ -1883,10 +1877,6 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>> __set_bit(BTN_RIGHT, input_dev->keybit);
>>
>> if (features->touch_max) {
>> - /* touch interface */
>> - unsigned int flags = INPUT_MT_POINTER;
>> -
>> - __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>> if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
>> input_set_abs_params(input_dev,
>> ABS_MT_TOUCH_MAJOR,
>> @@ -1894,12 +1884,8 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
>> input_set_abs_params(input_dev,
>> ABS_MT_TOUCH_MINOR,
>> 0, features->y_max, 0, 0);
>> - } else {
>> - __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
>> - __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
>> - flags = 0;
>> }
>> - input_mt_init_slots(input_dev, features->touch_max, flags);
>> + input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
>
> I think you want to use 'input_mt_init_slots(input_dev,
> features->touch_max + 1, INPUT_MT_POINTER)' instead. This is one more
> slot than necessary, but the number of slots is used in deciding which
> of the BTN_TOOL_*TAP buttons the kernel will advertise. Our protocol
> has the driver sending one more TAP than expected to differentiate
> touch and pad (e.g. single-touch device needs DOUBLETAP and two-finger
> touch needs TRIPLETAP). Adding one to the number of slots ensures a
> high enough TAP is advertised.
>
> Aside from that... Reviewed-by: Jason Gerecke <killertofu@gmail.com>
>
> Jason
> ---
> Now instead of four in the eights place /
> you’ve got three, ‘Cause you added one /
> (That is to say, eight) to the two, /
> But you can’t take seven from three, /
> So you look at the sixty-fours....
>
>> } else {
>> /* buttons/keys only interface */
>> __clear_bit(ABS_X, input_dev->absbit);
>> --
>> 1.9.1
>>
Ping has explained things to me in a bit more detail, and my
reservations have been calmed. We used to use TAP+1 hack to
differentiate PAD and touch in the days before the MT protocol. We
don't rely on that behavior at all when ABS_MT_* events are used,
which is the case with the BAMBOO_PT and INTUOS_HT devices that this
would effect. Therefore, without qualification...
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Jason
---
Now instead of four in the eights place /
you’ve got three, ‘Cause you added one /
(That is to say, eight) to the two, /
But you can’t take seven from three, /
So you look at the sixty-fours....
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-06-04 22:59 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-29 20:03 [PATCH] Input: wacom - cleanup multitouch code when touch_max is 2 Ping Cheng
2014-06-04 21:44 ` Jason Gerecke
2014-06-04 22:59 ` Jason Gerecke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).