[PATCH 00/51] treewide: Switch to __pm_runtime_put

linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
@ 2024-10-04  9:41 Sakari Ailus
  2024-10-04  9:41 ` [PATCH 20/51] Input: omap4-keypad: " Sakari Ailus
                   ` (2 more replies)
  0 siblings, 3 replies; 19+ messages in thread
From: Sakari Ailus @ 2024-10-04  9:41 UTC (permalink / raw)
  To: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
	dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
	linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
	patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
	linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
	linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi
  Cc: laurent.pinchart, rafael, Andy Shevchenko

Hello everyone,

This set will switch the users of pm_runtime_put_autosuspend() to
__pm_runtime_put_autosuspend() while the former will soon be re-purposed
to include a call to pm_runtime_mark_last_busy(). The two are almost
always used together, apart from bugs which are likely common. Going
forward, most new users should be using pm_runtime_put_autosuspend().

Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
and pm_runtime_mark_last_busy().

The diff in these patches have been generated using the following
Coccinelle script (besides a manual change in
drivers/iio/magnetometer/af8133j.c):

----------8<-------------------
@@
expression E1;

@@

- pm_runtime_put_autosuspend(E1)
+ __pm_runtime_put_autosuspend(E1)
----------8<-------------------

These patches are on top of today's linux-next (i.e. next-20241004).

Sakari Ailus (51):
  accel/ivpu: Switch to __pm_runtime_put_autosuspend()
  bluetooth: Switch to __pm_runtime_put_autosuspend()
  bus: sunxi-rsb: Switch to __pm_runtime_put_autosuspend()
  hwrng: Switch to __pm_runtime_put_autosuspend()
  clk: Switch to __pm_runtime_put_autosuspend()
  crypto: Switch to __pm_runtime_put_autosuspend()
  dmaengine: Switch to __pm_runtime_put_autosuspend()
  gpio: Switch to __pm_runtime_put_autosuspend()
  drm/amd: Switch to __pm_runtime_put_autosuspend()
  drm/nouveau: Switch to __pm_runtime_put_autosuspend()
  drm/radeon: Switch to __pm_runtime_put_autosuspend()
  drm/panfrost: Switch to __pm_runtime_put_autosuspend()
  drivers: drm: Switch to __pm_runtime_put_autosuspend()
  HSI: omap_ssi_port: Switch to __pm_runtime_put_autosuspend()
  stm class: Switch to __pm_runtime_put_autosuspend()
  i2c: Switch to __pm_runtime_put_autosuspend()
  i3c: master: svc: Switch to __pm_runtime_put_autosuspend()
  i3c: dw: Switch to __pm_runtime_put_autosuspend()
  iio: Switch to __pm_runtime_put_autosuspend()
  Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
  Input: cs40l50: Switch to __pm_runtime_put_autosuspend()
  iommu/arm-smmu: Switch to __pm_runtime_put_autosuspend()
  irqchip/imx-irqsteer: Switch to __pm_runtime_put_autosuspend()
  mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
  media: Switch to __pm_runtime_put_autosuspend()
  mfd: Switch to __pm_runtime_put_autosuspend()
  mei: Switch to __pm_runtime_put_autosuspend()
  mmc: Switch to __pm_runtime_put_autosuspend()
  mtd: rawnand: gpmi: Switch to __pm_runtime_put_autosuspend()
  net: Switch to __pm_runtime_put_autosuspend()
  nfc: trf7970a: Switch to __pm_runtime_put_autosuspend()
  PCI/portdrv: Switch to __pm_runtime_put_autosuspend()
  phy: motorola: phy-mapphone-mdm6600: Switch to
    __pm_runtime_put_autosuspend()
  phy: ti: phy-twl4030-usb: Switch to __pm_runtime_put_autosuspend()
  power: Switch to __pm_runtime_put_autosuspend()
  pwm: img: Switch to __pm_runtime_put_autosuspend()
  regulator: stm32-vrefbuf: Switch to __pm_runtime_put_autosuspend()
  remoteproc: omap: Switch to __pm_runtime_put_autosuspend()
  slimbus: Switch to __pm_runtime_put_autosuspend()
  soundwire: Switch to __pm_runtime_put_autosuspend()
  spi: Switch to __pm_runtime_put_autosuspend()
  staging: Switch to __pm_runtime_put_autosuspend()
  thunderbolt: Switch to __pm_runtime_put_autosuspend()
  serial: Switch to __pm_runtime_put_autosuspend()
  usb: Switch to __pm_runtime_put_autosuspend()
  w1: omap-hdq: Switch to __pm_runtime_put_autosuspend()
  staging: greybus: Switch to __pm_runtime_put_autosuspend()
  ALSA: hda: Switch to __pm_runtime_put_autosuspend()
  ASoC: Switch to __pm_runtime_put_autosuspend()
  ALSA: intel_hdmi: Switch to __pm_runtime_put_autosuspend()
  soc: apple: mailbox: Switch to __pm_runtime_put_autosuspend()

 drivers/accel/ivpu/ivpu_drv.c                 |   2 +-
 drivers/accel/ivpu/ivpu_pm.c                  |   8 +-
 drivers/bluetooth/btmtksdio.c                 |   2 +-
 drivers/bluetooth/hci_bcm.c                   |   6 +-
 drivers/bluetooth/hci_h5.c                    |   4 +-
 drivers/bluetooth/hci_intel.c                 |   6 +-
 drivers/bus/sunxi-rsb.c                       |   4 +-
 drivers/char/hw_random/cctrng.c               |   2 +-
 drivers/char/hw_random/omap3-rom-rng.c        |   2 +-
 drivers/clk/imx/clk-imx8qxp-lpcg.c            |   2 +-
 drivers/clk/imx/clk-scu.c                     |   2 +-
 drivers/clk/qcom/lpassaudiocc-sc7280.c        |   4 +-
 drivers/clk/qcom/lpasscorecc-sc7180.c         |   4 +-
 drivers/crypto/ccree/cc_pm.c                  |   2 +-
 drivers/crypto/hisilicon/qm.c                 |   2 +-
 drivers/crypto/omap-aes-gcm.c                 |   2 +-
 drivers/crypto/omap-aes.c                     |   2 +-
 drivers/crypto/omap-des.c                     |   2 +-
 drivers/crypto/omap-sham.c                    |   2 +-
 drivers/crypto/rockchip/rk3288_crypto_ahash.c |   2 +-
 .../crypto/rockchip/rk3288_crypto_skcipher.c  |   2 +-
 drivers/crypto/stm32/stm32-crc32.c            |   4 +-
 drivers/crypto/stm32/stm32-cryp.c             |   2 +-
 drivers/crypto/stm32/stm32-hash.c             |   2 +-
 drivers/dma/at_xdmac.c                        |  24 +--
 drivers/dma/pl330.c                           |  14 +-
 drivers/dma/qcom/bam_dma.c                    |  10 +-
 drivers/dma/qcom/hidma.c                      |  18 +-
 drivers/dma/qcom/hidma_dbg.c                  |   2 +-
 drivers/dma/qcom/hidma_mgmt.c                 |   4 +-
 drivers/dma/ste_dma40.c                       |  16 +-
 drivers/dma/ti/cppi41.c                       |  10 +-
 drivers/dma/xilinx/zynqmp_dma.c               |   2 +-
 drivers/gpio/gpio-arizona.c                   |  10 +-
 drivers/gpio/gpio-mxc.c                       |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c      |   2 +-
 .../gpu/drm/amd/amdgpu/amdgpu_connectors.c    |  16 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c   | 120 ++++++------
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.c   |   2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c       |   6 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c     |   6 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c       |   4 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c       |   4 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_rap.c       |   4 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c       |   2 +-
 .../gpu/drm/amd/amdgpu/amdgpu_securedisplay.c |   4 +-
 drivers/gpu/drm/amd/amdkfd/kfd_process.c      |   4 +-
 .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   2 +-
 drivers/gpu/drm/amd/pm/amdgpu_pm.c            | 178 +++++++++---------
 .../drm/bridge/analogix/analogix_dp_core.c    |   2 +-
 drivers/gpu/drm/bridge/analogix/anx7625.c     |   4 +-
 drivers/gpu/drm/bridge/parade-ps8640.c        |   4 +-
 drivers/gpu/drm/bridge/ti-sn65dsi86.c         |  14 +-
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c         |  12 +-
 drivers/gpu/drm/exynos/exynos_drm_fimc.c      |   4 +-
 drivers/gpu/drm/exynos/exynos_drm_g2d.c       |   4 +-
 drivers/gpu/drm/exynos/exynos_drm_gsc.c       |   6 +-
 drivers/gpu/drm/exynos/exynos_drm_rotator.c   |   2 +-
 drivers/gpu/drm/exynos/exynos_drm_scaler.c    |   2 +-
 drivers/gpu/drm/i915/intel_runtime_pm.c       |   4 +-
 drivers/gpu/drm/imx/dcss/dcss-crtc.c          |   2 +-
 drivers/gpu/drm/lima/lima_sched.c             |   2 +-
 drivers/gpu/drm/msm/adreno/adreno_device.c    |   2 +-
 drivers/gpu/drm/msm/adreno/adreno_gpu.c       |   2 +-
 drivers/gpu/drm/msm/msm_gpu.c                 |   2 +-
 drivers/gpu/drm/msm/msm_iommu.c               |   4 +-
 drivers/gpu/drm/msm/msm_submitqueue.c         |   2 +-
 drivers/gpu/drm/nouveau/dispnv50/disp.c       |  10 +-
 drivers/gpu/drm/nouveau/nouveau_connector.c   |   4 +-
 drivers/gpu/drm/nouveau/nouveau_debugfs.c     |   8 +-
 drivers/gpu/drm/nouveau/nouveau_display.c     |   4 +-
 drivers/gpu/drm/nouveau/nouveau_drm.c         |  10 +-
 drivers/gpu/drm/nouveau/nouveau_gem.c         |  10 +-
 drivers/gpu/drm/panel/panel-edp.c             |   8 +-
 .../gpu/drm/panel/panel-samsung-atna33xc20.c  |   6 +-
 drivers/gpu/drm/panel/panel-simple.c          |   6 +-
 drivers/gpu/drm/panfrost/panfrost_job.c       |   4 +-
 drivers/gpu/drm/panfrost/panfrost_mmu.c       |   4 +-
 drivers/gpu/drm/panfrost/panfrost_perfcnt.c   |   4 +-
 drivers/gpu/drm/panthor/panthor_device.c      |   2 +-
 drivers/gpu/drm/panthor/panthor_sched.c       |   6 +-
 drivers/gpu/drm/radeon/radeon_acpi.c          |   2 +-
 drivers/gpu/drm/radeon/radeon_connectors.c    |  20 +-
 drivers/gpu/drm/radeon/radeon_display.c       |   6 +-
 drivers/gpu/drm/radeon/radeon_drv.c           |   4 +-
 drivers/gpu/drm/radeon/radeon_fbdev.c         |   4 +-
 drivers/gpu/drm/radeon/radeon_kms.c           |  10 +-
 drivers/gpu/drm/tegra/submit.c                |   2 +-
 drivers/gpu/drm/tidss/tidss_drv.c             |   2 +-
 drivers/gpu/drm/vc4/vc4_v3d.c                 |   2 +-
 drivers/hsi/controllers/omap_ssi_port.c       |  42 ++---
 drivers/hwtracing/stm/core.c                  |   8 +-
 drivers/i2c/busses/i2c-amd-mp2-pci.c          |   2 +-
 drivers/i2c/busses/i2c-amd-mp2.h              |   2 +-
 drivers/i2c/busses/i2c-at91-master.c          |   2 +-
 drivers/i2c/busses/i2c-cadence.c              |   2 +-
 drivers/i2c/busses/i2c-davinci.c              |   4 +-
 drivers/i2c/busses/i2c-designware-master.c    |   2 +-
 drivers/i2c/busses/i2c-designware-pcidrv.c    |   2 +-
 drivers/i2c/busses/i2c-hix5hd2.c              |   2 +-
 drivers/i2c/busses/i2c-i801.c                 |   4 +-
 drivers/i2c/busses/i2c-img-scb.c              |   6 +-
 drivers/i2c/busses/i2c-imx-lpi2c.c            |   6 +-
 drivers/i2c/busses/i2c-imx.c                  |   4 +-
 drivers/i2c/busses/i2c-mv64xxx.c              |   2 +-
 drivers/i2c/busses/i2c-nvidia-gpu.c           |   4 +-
 drivers/i2c/busses/i2c-omap.c                 |   6 +-
 drivers/i2c/busses/i2c-qcom-cci.c             |   2 +-
 drivers/i2c/busses/i2c-qcom-geni.c            |   2 +-
 drivers/i2c/busses/i2c-qup.c                  |   4 +-
 drivers/i2c/busses/i2c-riic.c                 |   4 +-
 drivers/i2c/busses/i2c-rzv2m.c                |   2 +-
 drivers/i2c/busses/i2c-sprd.c                 |   4 +-
 drivers/i2c/busses/i2c-stm32f7.c              |  10 +-
 drivers/i2c/busses/i2c-xiic.c                 |   2 +-
 drivers/i3c/master/dw-i3c-master.c            |  16 +-
 drivers/i3c/master/svc-i3c-master.c           |  16 +-
 drivers/iio/accel/bmc150-accel-core.c         |   2 +-
 drivers/iio/accel/bmi088-accel-core.c         |   6 +-
 drivers/iio/accel/fxls8962af-core.c           |   2 +-
 drivers/iio/accel/kxcjk-1013.c                |   2 +-
 drivers/iio/accel/kxsd9.c                     |   6 +-
 drivers/iio/accel/mma8452.c                   |   2 +-
 drivers/iio/accel/mma9551_core.c              |   2 +-
 drivers/iio/accel/msa311.c                    |  12 +-
 drivers/iio/adc/ab8500-gpadc.c                |   2 +-
 drivers/iio/adc/at91-sama5d2_adc.c            |  20 +-
 drivers/iio/adc/rcar-gyroadc.c                |   2 +-
 drivers/iio/adc/stm32-adc-core.c              |   2 +-
 drivers/iio/adc/stm32-adc.c                   |  12 +-
 drivers/iio/adc/sun4i-gpadc-iio.c             |   4 +-
 drivers/iio/adc/ti-ads1015.c                  |   2 +-
 drivers/iio/adc/ti-ads1100.c                  |   2 +-
 drivers/iio/adc/ti-ads1119.c                  |   4 +-
 drivers/iio/chemical/atlas-sensor.c           |   4 +-
 .../common/hid-sensors/hid-sensor-trigger.c   |   2 +-
 drivers/iio/dac/stm32-dac.c                   |   6 +-
 drivers/iio/gyro/bmg160_core.c                |   2 +-
 drivers/iio/gyro/fxas21002c_core.c            |   2 +-
 drivers/iio/gyro/mpu3050-core.c               |   6 +-
 drivers/iio/gyro/mpu3050-i2c.c                |   2 +-
 .../iio/imu/inv_icm42600/inv_icm42600_accel.c |  10 +-
 .../imu/inv_icm42600/inv_icm42600_buffer.c    |   2 +-
 .../iio/imu/inv_icm42600/inv_icm42600_gyro.c  |  10 +-
 .../iio/imu/inv_icm42600/inv_icm42600_temp.c  |   2 +-
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c    |  14 +-
 drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c |   4 +-
 drivers/iio/imu/kmx61.c                       |   2 +-
 drivers/iio/light/apds9306.c                  |   6 +-
 drivers/iio/light/apds9960.c                  |   4 +-
 drivers/iio/light/bh1780.c                    |   2 +-
 drivers/iio/light/gp2ap002.c                  |   4 +-
 drivers/iio/light/isl29028.c                  |   2 +-
 drivers/iio/light/ltrf216a.c                  |   2 +-
 drivers/iio/light/pa12203001.c                |   2 +-
 drivers/iio/light/rpr0521.c                   |   2 +-
 drivers/iio/light/tsl2583.c                   |   2 +-
 drivers/iio/light/tsl2591.c                   |   4 +-
 drivers/iio/light/us5182d.c                   |   2 +-
 drivers/iio/light/vcnl4000.c                  |   2 +-
 drivers/iio/light/vcnl4035.c                  |   2 +-
 drivers/iio/magnetometer/af8133j.c            |   4 +-
 drivers/iio/magnetometer/ak8974.c             |   4 +-
 drivers/iio/magnetometer/ak8975.c             |   2 +-
 drivers/iio/magnetometer/bmc150_magn.c        |   2 +-
 drivers/iio/magnetometer/tmag5273.c           |   4 +-
 drivers/iio/magnetometer/yamaha-yas530.c      |   4 +-
 drivers/iio/pressure/bmp280-core.c            |  10 +-
 drivers/iio/pressure/icp10100.c               |   2 +-
 drivers/iio/pressure/mpl115.c                 |   4 +-
 drivers/iio/pressure/zpa2326.c                |   4 +-
 .../iio/proximity/pulsedlight-lidar-lite-v2.c |   2 +-
 drivers/iio/proximity/srf04.c                 |   2 +-
 drivers/iio/temperature/mlx90614.c            |   4 +-
 drivers/iio/temperature/mlx90632.c            |   4 +-
 drivers/iio/temperature/mlx90635.c            |   4 +-
 drivers/input/keyboard/omap4-keypad.c         |   8 +-
 drivers/input/misc/cs40l50-vibra.c            |   8 +-
 drivers/iommu/arm/arm-smmu/arm-smmu.c         |   2 +-
 drivers/irqchip/irq-imx-irqsteer.c            |   2 +-
 drivers/mailbox/mtk-cmdq-mailbox.c            |  10 +-
 drivers/media/i2c/alvium-csi2.c               |   2 +-
 drivers/media/i2c/ccs/ccs-core.c              |  10 +-
 drivers/media/i2c/dw9719.c                    |   2 +-
 drivers/media/i2c/gc0308.c                    |   6 +-
 drivers/media/i2c/gc2145.c                    |   8 +-
 drivers/media/i2c/imx283.c                    |   6 +-
 drivers/media/i2c/imx290.c                    |   6 +-
 drivers/media/i2c/imx296.c                    |   4 +-
 drivers/media/i2c/imx415.c                    |   4 +-
 drivers/media/i2c/mt9m114.c                   |  12 +-
 drivers/media/i2c/ov2680.c                    |   2 +-
 drivers/media/i2c/ov4689.c                    |   6 +-
 drivers/media/i2c/ov5640.c                    |   8 +-
 drivers/media/i2c/ov5645.c                    |   6 +-
 drivers/media/i2c/ov5693.c                    |   2 +-
 drivers/media/i2c/ov64a40.c                   |   8 +-
 drivers/media/i2c/ov7251.c                    |   2 +-
 drivers/media/i2c/ov8858.c                    |   4 +-
 drivers/media/i2c/thp7312.c                   |   8 +-
 drivers/media/i2c/video-i2c.c                 |   8 +-
 .../media/platform/nvidia/tegra-vde/h264.c    |   4 +-
 drivers/media/platform/qcom/venus/vdec.c      |   4 +-
 drivers/media/platform/qcom/venus/venc.c      |   4 +-
 .../platform/raspberrypi/pisp_be/pisp_be.c    |   4 +-
 .../media/platform/st/sti/delta/delta-v4l2.c  |   4 +-
 drivers/media/platform/st/sti/hva/hva-hw.c    |   8 +-
 .../media/platform/verisilicon/hantro_drv.c   |   2 +-
 drivers/media/rc/gpio-ir-recv.c               |   2 +-
 drivers/mfd/arizona-irq.c                     |   2 +-
 drivers/mfd/cs40l50-core.c                    |   2 +-
 drivers/mfd/cs42l43.c                         |   2 +-
 drivers/misc/mei/client.c                     |  14 +-
 drivers/mmc/core/core.c                       |   4 +-
 drivers/mmc/host/atmel-mci.c                  |   4 +-
 drivers/mmc/host/dw_mmc-rockchip.c            |   2 +-
 drivers/mmc/host/dw_mmc.c                     |   2 +-
 drivers/mmc/host/mmci.c                       |   2 +-
 drivers/mmc/host/omap_hsmmc.c                 |   6 +-
 drivers/mmc/host/sdhci-msm.c                  |   2 +-
 drivers/mmc/host/sdhci-of-at91.c              |   2 +-
 drivers/mmc/host/sdhci-omap.c                 |   4 +-
 drivers/mmc/host/sdhci-pci-core.c             |   2 +-
 drivers/mmc/host/sdhci-pxav3.c                |   6 +-
 drivers/mmc/host/sdhci-sprd.c                 |   2 +-
 drivers/mmc/host/sdhci-xenon.c                |   2 +-
 drivers/mmc/host/sdhci_am654.c                |   2 +-
 drivers/mmc/host/tmio_mmc_core.c              |   2 +-
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c    |  10 +-
 drivers/net/ethernet/cadence/macb_main.c      |  10 +-
 drivers/net/ethernet/freescale/fec_main.c     |  16 +-
 drivers/net/ethernet/renesas/ravb_main.c      |   8 +-
 drivers/net/ethernet/ti/davinci_mdio.c        |  14 +-
 drivers/net/ipa/ipa_interrupt.c               |   2 +-
 drivers/net/ipa/ipa_main.c                    |   2 +-
 drivers/net/ipa/ipa_modem.c                   |   8 +-
 drivers/net/ipa/ipa_smp2p.c                   |   4 +-
 drivers/net/ipa/ipa_uc.c                      |   4 +-
 drivers/net/wireless/ath/wil6210/pm.c         |   2 +-
 drivers/net/wireless/ti/wl18xx/debugfs.c      |   6 +-
 drivers/net/wireless/ti/wlcore/cmd.c          |   2 +-
 drivers/net/wireless/ti/wlcore/debugfs.c      |  22 +--
 drivers/net/wireless/ti/wlcore/main.c         |  72 +++----
 drivers/net/wireless/ti/wlcore/scan.c         |   2 +-
 drivers/net/wireless/ti/wlcore/sysfs.c        |   2 +-
 drivers/net/wireless/ti/wlcore/testmode.c     |   4 +-
 drivers/net/wireless/ti/wlcore/tx.c           |   2 +-
 drivers/net/wireless/ti/wlcore/vendor_cmd.c   |   6 +-
 drivers/net/wwan/qcom_bam_dmux.c              |   4 +-
 drivers/net/wwan/t7xx/t7xx_hif_cldma.c        |   6 +-
 drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c    |   6 +-
 drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c    |   4 +-
 drivers/nfc/trf7970a.c                        |   2 +-
 drivers/pci/pcie/portdrv.c                    |   2 +-
 drivers/phy/motorola/phy-mapphone-mdm6600.c   |   4 +-
 drivers/phy/ti/phy-twl4030-usb.c              |   8 +-
 drivers/power/supply/bq24190_charger.c        |  28 +--
 drivers/power/supply/twl4030_charger.c        |   2 +-
 drivers/pwm/pwm-img.c                         |   4 +-
 drivers/regulator/stm32-vrefbuf.c             |  12 +-
 drivers/remoteproc/omap_remoteproc.c          |   6 +-
 drivers/slimbus/core.c                        |   2 +-
 drivers/slimbus/messaging.c                   |   4 +-
 drivers/soc/apple/mailbox.c                   |   2 +-
 drivers/soundwire/bus.c                       |   2 +-
 drivers/soundwire/cadence_master.c            |   2 +-
 drivers/soundwire/qcom.c                      |   6 +-
 drivers/spi/atmel-quadspi.c                   |  10 +-
 drivers/spi/spi-cadence-quadspi.c             |   4 +-
 drivers/spi/spi-cadence.c                     |   2 +-
 drivers/spi/spi-dw-pci.c                      |   2 +-
 drivers/spi/spi-fsl-espi.c                    |   4 +-
 drivers/spi/spi-fsl-lpspi.c                   |   4 +-
 drivers/spi/spi-imx.c                         |   6 +-
 drivers/spi/spi-mtk-nor.c                     |   2 +-
 drivers/spi/spi-omap2-mcspi.c                 |   6 +-
 drivers/spi/spi-pxa2xx-pci.c                  |   2 +-
 drivers/spi/spi-s3c64xx.c                     |   6 +-
 drivers/spi/spi-sprd.c                        |   2 +-
 drivers/spi/spi-stm32-qspi.c                  |  14 +-
 drivers/spi/spi-stm32.c                       |   4 +-
 drivers/spi/spi-ti-qspi.c                     |   4 +-
 drivers/spi/spi-zynqmp-gqspi.c                |   2 +-
 drivers/spi/spi.c                             |   6 +-
 drivers/staging/greybus/gbphy.h               |   2 +-
 drivers/staging/media/rkvdec/rkvdec.c         |   2 +-
 drivers/thunderbolt/debugfs.c                 |  22 +--
 drivers/thunderbolt/domain.c                  |   4 +-
 drivers/thunderbolt/icm.c                     |  14 +-
 drivers/thunderbolt/nhi.c                     |   2 +-
 drivers/thunderbolt/retimer.c                 |   4 +-
 drivers/thunderbolt/switch.c                  |   6 +-
 drivers/thunderbolt/tb.c                      |  18 +-
 drivers/thunderbolt/usb4_port.c               |   4 +-
 drivers/tty/serial/8250/8250_omap.c           |  18 +-
 drivers/tty/serial/8250/8250_port.c           |   4 +-
 drivers/tty/serial/fsl_lpuart.c               |   2 +-
 drivers/tty/serial/serial_core.c              |   2 +-
 drivers/tty/serial/uartlite.c                 |   4 +-
 drivers/tty/serial/xilinx_uartps.c            |   2 +-
 drivers/usb/cdns3/cdns3-gadget.c              |   2 +-
 drivers/usb/cdns3/cdnsp-gadget.c              |   2 +-
 drivers/usb/chipidea/core.c                   |   2 +-
 drivers/usb/chipidea/otg_fsm.c                |   2 +-
 drivers/usb/dwc3/core.c                       |   2 +-
 drivers/usb/dwc3/dwc3-am62.c                  |   2 +-
 drivers/usb/dwc3/dwc3-imx8mp.c                |   2 +-
 drivers/usb/gadget/udc/cdns2/cdns2-gadget.c   |   2 +-
 drivers/usb/host/xhci-mtk.c                   |   2 +-
 drivers/usb/misc/apple-mfi-fastcharge.c       |   2 +-
 drivers/usb/mtu3/mtu3_plat.c                  |   2 +-
 drivers/usb/musb/musb_core.c                  |  10 +-
 drivers/usb/musb/musb_debugfs.c               |  10 +-
 drivers/usb/musb/musb_dsps.c                  |   2 +-
 drivers/usb/musb/musb_gadget.c                |   8 +-
 drivers/usb/musb/omap2430.c                   |   2 +-
 drivers/w1/masters/omap_hdq.c                 |  10 +-
 include/linux/greybus/bundle.h                |   2 +-
 sound/hda/hdac_device.c                       |   2 +-
 sound/pci/hda/cs35l41_hda.c                   |   8 +-
 sound/pci/hda/cs35l56_hda.c                   |   2 +-
 sound/pci/hda/hda_intel.c                     |   2 +-
 sound/pci/hda/tas2781_hda_i2c.c               |   6 +-
 sound/soc/atmel/mchp-spdifrx.c                |  12 +-
 sound/soc/codecs/arizona-jack.c               |  12 +-
 sound/soc/codecs/arizona.c                    |   2 +-
 sound/soc/codecs/cs35l41.c                    |   4 +-
 sound/soc/codecs/cs35l45.c                    |   2 +-
 sound/soc/codecs/cs35l56-sdw.c                |   4 +-
 sound/soc/codecs/cs35l56-shared.c             |   2 +-
 sound/soc/codecs/cs35l56.c                    |   2 +-
 sound/soc/codecs/cs42l42-sdw.c                |   2 +-
 sound/soc/codecs/cs42l42.c                    |   4 +-
 sound/soc/codecs/cs42l43-jack.c               |  10 +-
 sound/soc/codecs/cs42l43.c                    |   4 +-
 sound/soc/codecs/hda.c                        |   6 +-
 sound/soc/codecs/madera.c                     |   6 +-
 sound/soc/codecs/max98363.c                   |   2 +-
 sound/soc/codecs/max98373-sdw.c               |   2 +-
 sound/soc/codecs/rt1017-sdca-sdw.c            |   2 +-
 sound/soc/codecs/rt1308-sdw.c                 |   2 +-
 sound/soc/codecs/rt1316-sdw.c                 |   2 +-
 sound/soc/codecs/rt1318-sdw.c                 |   2 +-
 sound/soc/codecs/rt1320-sdw.c                 |   2 +-
 sound/soc/codecs/rt5682-sdw.c                 |   2 +-
 sound/soc/codecs/rt700.c                      |   4 +-
 sound/soc/codecs/rt711-sdca.c                 |   4 +-
 sound/soc/codecs/rt711.c                      |   4 +-
 sound/soc/codecs/rt712-sdca-dmic.c            |   2 +-
 sound/soc/codecs/rt712-sdca.c                 |   4 +-
 sound/soc/codecs/rt715-sdca.c                 |   2 +-
 sound/soc/codecs/rt715.c                      |   2 +-
 sound/soc/codecs/rt722-sdca.c                 |   4 +-
 sound/soc/codecs/wcd-mbhc-v2.c                |   4 +-
 sound/soc/codecs/wsa881x.c                    |   2 +-
 sound/soc/codecs/wsa884x.c                    |   2 +-
 sound/soc/intel/atom/sst/sst_pvt.c            |   2 +-
 sound/soc/intel/avs/core.c                    |   2 +-
 sound/soc/intel/avs/debugfs.c                 |   4 +-
 sound/soc/intel/avs/pcm.c                     |   2 +-
 sound/soc/intel/catpt/pcm.c                   |  12 +-
 sound/soc/intel/catpt/sysfs.c                 |   2 +-
 sound/soc/soc-component.c                     |   2 +-
 sound/soc/sof/control.c                       |   2 +-
 sound/soc/sof/debug.c                         |   2 +-
 sound/soc/sof/ipc3-dtrace.c                   |   2 +-
 sound/soc/sof/ipc4-loader.c                   |   2 +-
 sound/soc/sof/pcm.c                           |   2 +-
 sound/soc/sof/sof-client-ipc-flood-test.c     |   2 +-
 .../soc/sof/sof-client-ipc-kernel-injector.c  |   2 +-
 sound/soc/sof/sof-client-ipc-msg-injector.c   |   2 +-
 sound/soc/sof/sof-client-probes.c             |   6 +-
 sound/x86/intel_hdmi_audio.c                  |   6 +-
 373 files changed, 1076 insertions(+), 1076 deletions(-)

-- 
2.39.5


^ permalink raw reply	[flat|nested] 19+ messages in thread

* [PATCH 20/51] Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
  2024-10-04  9:41 [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend() Sakari Ailus
@ 2024-10-04  9:41 ` Sakari Ailus
  2024-10-04  9:55   ` Andreas Kemnade
  2024-10-04  9:41 ` [PATCH 21/51] Input: cs40l50: " Sakari Ailus
  2024-10-04 14:38 ` [PATCH 00/51] treewide: " Ulf Hansson
  2 siblings, 1 reply; 19+ messages in thread
From: Sakari Ailus @ 2024-10-04  9:41 UTC (permalink / raw)
  To: Dmitry Torokhov, Tony Lindgren, Andreas Kemnade, Sakari Ailus; +Cc: linux-input

pm_runtime_put_autosuspend() will soon be changed to include a call to
pm_runtime_mark_last_busy(). This patch switches the current users to
__pm_runtime_put_autosuspend() which will continue to have the
functionality of old pm_runtime_put_autosuspend().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/input/keyboard/omap4-keypad.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 040b340995d8..cc8d77601fc7 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -196,7 +196,7 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
 			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
 
 	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	__pm_runtime_put_autosuspend(dev);
 
 	return IRQ_HANDLED;
 }
@@ -234,7 +234,7 @@ static int omap4_keypad_open(struct input_dev *input)
 
 out:
 	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	__pm_runtime_put_autosuspend(dev);
 
 	return error;
 }
@@ -268,7 +268,7 @@ static void omap4_keypad_close(struct input_dev *input)
 	clk_disable_unprepare(keypad_data->fck);
 
 	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	__pm_runtime_put_autosuspend(dev);
 }
 
 static int omap4_keypad_parse_dt(struct device *dev,
@@ -407,7 +407,7 @@ static int omap4_keypad_probe(struct platform_device *pdev)
 	}
 
 	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	__pm_runtime_put_autosuspend(dev);
 	if (error)
 		return error;
 
-- 
2.39.5


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* Re: [PATCH 20/51] Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
  2024-10-04  9:41 ` [PATCH 20/51] Input: omap4-keypad: " Sakari Ailus
@ 2024-10-04  9:55   ` Andreas Kemnade
  2024-10-04 10:26     ` Sakari Ailus
  0 siblings, 1 reply; 19+ messages in thread
From: Andreas Kemnade @ 2024-10-04  9:55 UTC (permalink / raw)
  To: Sakari Ailus; +Cc: Dmitry Torokhov, Tony Lindgren, linux-input

Am Fri,  4 Oct 2024 12:41:23 +0300
schrieb Sakari Ailus <sakari.ailus@linux.intel.com>:

> pm_runtime_put_autosuspend() will soon be changed to include a call to
> pm_runtime_mark_last_busy(). This patch switches the current users to
> __pm_runtime_put_autosuspend() which will continue to have the
> functionality of old pm_runtime_put_autosuspend().
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
>  drivers/input/keyboard/omap4-keypad.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/keyboard/omap4-keypad.c
> b/drivers/input/keyboard/omap4-keypad.c index
> 040b340995d8..cc8d77601fc7 100644 ---
> a/drivers/input/keyboard/omap4-keypad.c +++
> b/drivers/input/keyboard/omap4-keypad.c @@ -196,7 +196,7 @@ static
> irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
> kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); 
>  	pm_runtime_mark_last_busy(dev);
> -	pm_runtime_put_autosuspend(dev);
> +	__pm_runtime_put_autosuspend(dev);
>  
>  	return IRQ_HANDLED;
>  }
> @@ -234,7 +234,7 @@ static int omap4_keypad_open(struct input_dev
> *input) 
>  out:
>  	pm_runtime_mark_last_busy(dev);
> -	pm_runtime_put_autosuspend(dev);
> +	__pm_runtime_put_autosuspend(dev);
>  
hmm, if pm_runtime_put_autosuspend() will include the call to
pm_runtime_mark_last_busy(), then why is this change needed?
After the change, the mark_last_busy could be removed.

Regards,
Andreas

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 20/51] Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
  2024-10-04  9:55   ` Andreas Kemnade
@ 2024-10-04 10:26     ` Sakari Ailus
  2024-10-04 10:54       ` Andreas Kemnade
  2024-10-04 11:08       ` Dmitry Torokhov
  0 siblings, 2 replies; 19+ messages in thread
From: Sakari Ailus @ 2024-10-04 10:26 UTC (permalink / raw)
  To: Andreas Kemnade
  Cc: Dmitry Torokhov, Tony Lindgren, linux-input, Ilpo Järvinen

Hi Andreas,

On Fri, Oct 04, 2024 at 11:55:11AM +0200, Andreas Kemnade wrote:
> Am Fri,  4 Oct 2024 12:41:23 +0300
> schrieb Sakari Ailus <sakari.ailus@linux.intel.com>:
> 
> > pm_runtime_put_autosuspend() will soon be changed to include a call to
> > pm_runtime_mark_last_busy(). This patch switches the current users to
> > __pm_runtime_put_autosuspend() which will continue to have the
> > functionality of old pm_runtime_put_autosuspend().
> > 
> > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > ---
> >  drivers/input/keyboard/omap4-keypad.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/input/keyboard/omap4-keypad.c
> > b/drivers/input/keyboard/omap4-keypad.c index
> > 040b340995d8..cc8d77601fc7 100644 ---
> > a/drivers/input/keyboard/omap4-keypad.c +++
> > b/drivers/input/keyboard/omap4-keypad.c @@ -196,7 +196,7 @@ static
> > irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
> > kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); 
> >  	pm_runtime_mark_last_busy(dev);
> > -	pm_runtime_put_autosuspend(dev);
> > +	__pm_runtime_put_autosuspend(dev);
> >  
> >  	return IRQ_HANDLED;
> >  }
> > @@ -234,7 +234,7 @@ static int omap4_keypad_open(struct input_dev
> > *input) 
> >  out:
> >  	pm_runtime_mark_last_busy(dev);
> > -	pm_runtime_put_autosuspend(dev);
> > +	__pm_runtime_put_autosuspend(dev);
> >  
> hmm, if pm_runtime_put_autosuspend() will include the call to
> pm_runtime_mark_last_busy(), then why is this change needed?
> After the change, the mark_last_busy could be removed.

It could, in which case we'd be living with pm_runtime_mark_last_busy()
called twice, for some time, and for some code, possibly even in a release
kernel, depending on how well the patches "stick". It likely wouldn't be
harmful. Still, to avoid making functional changes to more than 350 files I
know little about, I've instead posted this set to prepare for
pm_runtime_put_autosuspend() functionality change while keeping the
functionality of the code exactly the same.

Also added Ilpo who had a similar question.

-- 
Kidn regards,

Sakari Ailus

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 20/51] Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
  2024-10-04 10:26     ` Sakari Ailus
@ 2024-10-04 10:54       ` Andreas Kemnade
  2024-10-04 11:08       ` Dmitry Torokhov
  1 sibling, 0 replies; 19+ messages in thread
From: Andreas Kemnade @ 2024-10-04 10:54 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: Dmitry Torokhov, Tony Lindgren, linux-input, Ilpo Järvinen

Am Fri, 4 Oct 2024 10:26:42 +0000
schrieb Sakari Ailus <sakari.ailus@linux.intel.com>:

> Hi Andreas,
> 
> On Fri, Oct 04, 2024 at 11:55:11AM +0200, Andreas Kemnade wrote:
> > Am Fri,  4 Oct 2024 12:41:23 +0300
> > schrieb Sakari Ailus <sakari.ailus@linux.intel.com>:
> >   
> > > pm_runtime_put_autosuspend() will soon be changed to include a
> > > call to pm_runtime_mark_last_busy(). This patch switches the
> > > current users to __pm_runtime_put_autosuspend() which will
> > > continue to have the functionality of old
> > > pm_runtime_put_autosuspend().
> > > 
> > > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > > ---
> > >  drivers/input/keyboard/omap4-keypad.c | 8 ++++----
> > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/input/keyboard/omap4-keypad.c
> > > b/drivers/input/keyboard/omap4-keypad.c index
> > > 040b340995d8..cc8d77601fc7 100644 ---
> > > a/drivers/input/keyboard/omap4-keypad.c +++
> > > b/drivers/input/keyboard/omap4-keypad.c @@ -196,7 +196,7 @@ static
> > > irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
> > > kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); 
> > >  	pm_runtime_mark_last_busy(dev);
> > > -	pm_runtime_put_autosuspend(dev);
> > > +	__pm_runtime_put_autosuspend(dev);
> > >  
> > >  	return IRQ_HANDLED;
> > >  }
> > > @@ -234,7 +234,7 @@ static int omap4_keypad_open(struct input_dev
> > > *input) 
> > >  out:
> > >  	pm_runtime_mark_last_busy(dev);
> > > -	pm_runtime_put_autosuspend(dev);
> > > +	__pm_runtime_put_autosuspend(dev);
> > >    
> > hmm, if pm_runtime_put_autosuspend() will include the call to
> > pm_runtime_mark_last_busy(), then why is this change needed?
> > After the change, the mark_last_busy could be removed.  
> 
> It could, in which case we'd be living with
> pm_runtime_mark_last_busy() called twice, for some time, and for some
> code, possibly even in a release kernel, depending on how well the
> patches "stick". It likely wouldn't be harmful. Still, to avoid
> making functional changes to more than 350 files I know little about,
> I've instead posted this set to prepare for
> pm_runtime_put_autosuspend() functionality change while keeping the
> functionality of the code exactly the same.
> 
> Also added Ilpo who had a similar question.
> 
Ah, ok, I did not get the cover letter.

> Once this conversion is done and pm_runtime_put_autosuspend()
> re-purposed, I'll post another set to merge the calls to
> __pm_runtime_put_autosuspend() and pm_runtime_mark_last_busy()

with that all this makes sense to me. So:

Reviewed-by: Andreas Kemnade <andreas@kemnade.info>

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 20/51] Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
  2024-10-04 10:26     ` Sakari Ailus
  2024-10-04 10:54       ` Andreas Kemnade
@ 2024-10-04 11:08       ` Dmitry Torokhov
  1 sibling, 0 replies; 19+ messages in thread
From: Dmitry Torokhov @ 2024-10-04 11:08 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: Andreas Kemnade, Tony Lindgren, linux-input, Ilpo Järvinen

Hi Sakari,

On Fri, Oct 04, 2024 at 10:26:42AM +0000, Sakari Ailus wrote:
> Hi Andreas,
> 
> On Fri, Oct 04, 2024 at 11:55:11AM +0200, Andreas Kemnade wrote:
> > Am Fri,  4 Oct 2024 12:41:23 +0300
> > schrieb Sakari Ailus <sakari.ailus@linux.intel.com>:
> > 
> > > pm_runtime_put_autosuspend() will soon be changed to include a call to
> > > pm_runtime_mark_last_busy(). This patch switches the current users to
> > > __pm_runtime_put_autosuspend() which will continue to have the
> > > functionality of old pm_runtime_put_autosuspend().
> > > 
> > > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> > > ---
> > >  drivers/input/keyboard/omap4-keypad.c | 8 ++++----
> > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/input/keyboard/omap4-keypad.c
> > > b/drivers/input/keyboard/omap4-keypad.c index
> > > 040b340995d8..cc8d77601fc7 100644 ---
> > > a/drivers/input/keyboard/omap4-keypad.c +++
> > > b/drivers/input/keyboard/omap4-keypad.c @@ -196,7 +196,7 @@ static
> > > irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
> > > kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); 
> > >  	pm_runtime_mark_last_busy(dev);
> > > -	pm_runtime_put_autosuspend(dev);
> > > +	__pm_runtime_put_autosuspend(dev);
> > >  
> > >  	return IRQ_HANDLED;
> > >  }
> > > @@ -234,7 +234,7 @@ static int omap4_keypad_open(struct input_dev
> > > *input) 
> > >  out:
> > >  	pm_runtime_mark_last_busy(dev);
> > > -	pm_runtime_put_autosuspend(dev);
> > > +	__pm_runtime_put_autosuspend(dev);
> > >  
> > hmm, if pm_runtime_put_autosuspend() will include the call to
> > pm_runtime_mark_last_busy(), then why is this change needed?
> > After the change, the mark_last_busy could be removed.
> 
> It could, in which case we'd be living with pm_runtime_mark_last_busy()
> called twice, for some time, and for some code, possibly even in a release
> kernel, depending on how well the patches "stick". It likely wouldn't be
> harmful. Still, to avoid making functional changes to more than 350 files I
> know little about, I've instead posted this set to prepare for
> pm_runtime_put_autosuspend() functionality change while keeping the
> functionality of the code exactly the same.

pm_runtime_mark_last_busy() is pretty cheap (it fetches current time and
stores it in the device power-related structure), so doing it twice
back-to-back should not be a problem.

I would prefer what Andreas suggested in the first place: remove call to
pm_runtime_mark_last_busy() once pm_runtime_put_autosuspend() does it
for us. I'd be OK with such change being merged through the same tree
that changes to pm_runtime_put_autosuspend() will be merged through.

Thanks.

-- 
Dmitry

^ permalink raw reply	[flat|nested] 19+ messages in thread

* [PATCH 21/51] Input: cs40l50: Switch to __pm_runtime_put_autosuspend()
  2024-10-04  9:41 [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend() Sakari Ailus
  2024-10-04  9:41 ` [PATCH 20/51] Input: omap4-keypad: " Sakari Ailus
@ 2024-10-04  9:41 ` Sakari Ailus
  2024-10-04 11:09   ` Dmitry Torokhov
  2024-10-04 14:38 ` [PATCH 00/51] treewide: " Ulf Hansson
  2 siblings, 1 reply; 19+ messages in thread
From: Sakari Ailus @ 2024-10-04  9:41 UTC (permalink / raw)
  To: James Ogletree, Fred Treven, Ben Bright, Dmitry Torokhov
  Cc: patches, linux-input

pm_runtime_put_autosuspend() will soon be changed to include a call to
pm_runtime_mark_last_busy(). This patch switches the current users to
__pm_runtime_put_autosuspend() which will continue to have the
functionality of old pm_runtime_put_autosuspend().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 drivers/input/misc/cs40l50-vibra.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/input/misc/cs40l50-vibra.c b/drivers/input/misc/cs40l50-vibra.c
index 03bdb7c26ec0..8555f0d93d3f 100644
--- a/drivers/input/misc/cs40l50-vibra.c
+++ b/drivers/input/misc/cs40l50-vibra.c
@@ -307,7 +307,7 @@ static void cs40l50_add_worker(struct work_struct *work)
 	}
 err_pm:
 	pm_runtime_mark_last_busy(vib->dev);
-	pm_runtime_put_autosuspend(vib->dev);
+	__pm_runtime_put_autosuspend(vib->dev);
 err_exit:
 	work_data->error = error;
 }
@@ -366,7 +366,7 @@ static void cs40l50_start_worker(struct work_struct *work)
 	}
 
 	pm_runtime_mark_last_busy(vib->dev);
-	pm_runtime_put_autosuspend(vib->dev);
+	__pm_runtime_put_autosuspend(vib->dev);
 err_free:
 	kfree(work_data);
 }
@@ -382,7 +382,7 @@ static void cs40l50_stop_worker(struct work_struct *work)
 	vib->dsp.write(vib->dev, vib->regmap, vib->dsp.stop_cmd);
 
 	pm_runtime_mark_last_busy(vib->dev);
-	pm_runtime_put_autosuspend(vib->dev);
+	__pm_runtime_put_autosuspend(vib->dev);
 
 	kfree(work_data);
 }
@@ -454,7 +454,7 @@ static void cs40l50_erase_worker(struct work_struct *work)
 	kfree(erase_effect);
 err_pm:
 	pm_runtime_mark_last_busy(vib->dev);
-	pm_runtime_put_autosuspend(vib->dev);
+	__pm_runtime_put_autosuspend(vib->dev);
 err_exit:
 	work_data->error = error;
 }
-- 
2.39.5


^ permalink raw reply related	[flat|nested] 19+ messages in thread

* Re: [PATCH 21/51] Input: cs40l50: Switch to __pm_runtime_put_autosuspend()
  2024-10-04  9:41 ` [PATCH 21/51] Input: cs40l50: " Sakari Ailus
@ 2024-10-04 11:09   ` Dmitry Torokhov
  0 siblings, 0 replies; 19+ messages in thread
From: Dmitry Torokhov @ 2024-10-04 11:09 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: James Ogletree, Fred Treven, Ben Bright, patches, linux-input

On Fri, Oct 04, 2024 at 12:41:23PM +0300, Sakari Ailus wrote:
> pm_runtime_put_autosuspend() will soon be changed to include a call to
> pm_runtime_mark_last_busy(). This patch switches the current users to
> __pm_runtime_put_autosuspend() which will continue to have the
> functionality of old pm_runtime_put_autosuspend().
> 
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
>  drivers/input/misc/cs40l50-vibra.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/misc/cs40l50-vibra.c b/drivers/input/misc/cs40l50-vibra.c
> index 03bdb7c26ec0..8555f0d93d3f 100644
> --- a/drivers/input/misc/cs40l50-vibra.c
> +++ b/drivers/input/misc/cs40l50-vibra.c
> @@ -307,7 +307,7 @@ static void cs40l50_add_worker(struct work_struct *work)
>  	}
>  err_pm:
>  	pm_runtime_mark_last_busy(vib->dev);
> -	pm_runtime_put_autosuspend(vib->dev);
> +	__pm_runtime_put_autosuspend(vib->dev);

Same comment as with omap4 keypad: prefer to simply remove
pm_runtime_mark_last_busy() once pm_runtime_put_autosuspend() does this
for us.

Thanks.

-- 
Dmitry

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-04  9:41 [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend() Sakari Ailus
  2024-10-04  9:41 ` [PATCH 20/51] Input: omap4-keypad: " Sakari Ailus
  2024-10-04  9:41 ` [PATCH 21/51] Input: cs40l50: " Sakari Ailus
@ 2024-10-04 14:38 ` Ulf Hansson
  2024-10-07 18:49   ` Laurent Pinchart
  2 siblings, 1 reply; 19+ messages in thread
From: Ulf Hansson @ 2024-10-04 14:38 UTC (permalink / raw)
  To: Sakari Ailus
  Cc: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
	dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
	linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
	patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
	linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
	linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
	laurent.pinchart, rafael, Andy Shevchenko

On Fri, 4 Oct 2024 at 11:41, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
>
> Hello everyone,
>
> This set will switch the users of pm_runtime_put_autosuspend() to
> __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> to include a call to pm_runtime_mark_last_busy(). The two are almost
> always used together, apart from bugs which are likely common. Going
> forward, most new users should be using pm_runtime_put_autosuspend().
>
> Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> and pm_runtime_mark_last_busy().

That sounds like it could cause a lot of churns.

Why not add a new helper function that does the
pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
things? Then we can start moving users over to this new interface,
rather than having this intermediate step?

Kind regards
Uffe

>
> The diff in these patches have been generated using the following
> Coccinelle script (besides a manual change in
> drivers/iio/magnetometer/af8133j.c):
>
> ----------8<-------------------
> @@
> expression E1;
>
> @@
>
> - pm_runtime_put_autosuspend(E1)
> + __pm_runtime_put_autosuspend(E1)
> ----------8<-------------------
>
> These patches are on top of today's linux-next (i.e. next-20241004).
>
> Sakari Ailus (51):
>   accel/ivpu: Switch to __pm_runtime_put_autosuspend()
>   bluetooth: Switch to __pm_runtime_put_autosuspend()
>   bus: sunxi-rsb: Switch to __pm_runtime_put_autosuspend()
>   hwrng: Switch to __pm_runtime_put_autosuspend()
>   clk: Switch to __pm_runtime_put_autosuspend()
>   crypto: Switch to __pm_runtime_put_autosuspend()
>   dmaengine: Switch to __pm_runtime_put_autosuspend()
>   gpio: Switch to __pm_runtime_put_autosuspend()
>   drm/amd: Switch to __pm_runtime_put_autosuspend()
>   drm/nouveau: Switch to __pm_runtime_put_autosuspend()
>   drm/radeon: Switch to __pm_runtime_put_autosuspend()
>   drm/panfrost: Switch to __pm_runtime_put_autosuspend()
>   drivers: drm: Switch to __pm_runtime_put_autosuspend()
>   HSI: omap_ssi_port: Switch to __pm_runtime_put_autosuspend()
>   stm class: Switch to __pm_runtime_put_autosuspend()
>   i2c: Switch to __pm_runtime_put_autosuspend()
>   i3c: master: svc: Switch to __pm_runtime_put_autosuspend()
>   i3c: dw: Switch to __pm_runtime_put_autosuspend()
>   iio: Switch to __pm_runtime_put_autosuspend()
>   Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
>   Input: cs40l50: Switch to __pm_runtime_put_autosuspend()
>   iommu/arm-smmu: Switch to __pm_runtime_put_autosuspend()
>   irqchip/imx-irqsteer: Switch to __pm_runtime_put_autosuspend()
>   mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
>   media: Switch to __pm_runtime_put_autosuspend()
>   mfd: Switch to __pm_runtime_put_autosuspend()
>   mei: Switch to __pm_runtime_put_autosuspend()
>   mmc: Switch to __pm_runtime_put_autosuspend()
>   mtd: rawnand: gpmi: Switch to __pm_runtime_put_autosuspend()
>   net: Switch to __pm_runtime_put_autosuspend()
>   nfc: trf7970a: Switch to __pm_runtime_put_autosuspend()
>   PCI/portdrv: Switch to __pm_runtime_put_autosuspend()
>   phy: motorola: phy-mapphone-mdm6600: Switch to
>     __pm_runtime_put_autosuspend()
>   phy: ti: phy-twl4030-usb: Switch to __pm_runtime_put_autosuspend()
>   power: Switch to __pm_runtime_put_autosuspend()
>   pwm: img: Switch to __pm_runtime_put_autosuspend()
>   regulator: stm32-vrefbuf: Switch to __pm_runtime_put_autosuspend()
>   remoteproc: omap: Switch to __pm_runtime_put_autosuspend()
>   slimbus: Switch to __pm_runtime_put_autosuspend()
>   soundwire: Switch to __pm_runtime_put_autosuspend()
>   spi: Switch to __pm_runtime_put_autosuspend()
>   staging: Switch to __pm_runtime_put_autosuspend()
>   thunderbolt: Switch to __pm_runtime_put_autosuspend()
>   serial: Switch to __pm_runtime_put_autosuspend()
>   usb: Switch to __pm_runtime_put_autosuspend()
>   w1: omap-hdq: Switch to __pm_runtime_put_autosuspend()
>   staging: greybus: Switch to __pm_runtime_put_autosuspend()
>   ALSA: hda: Switch to __pm_runtime_put_autosuspend()
>   ASoC: Switch to __pm_runtime_put_autosuspend()
>   ALSA: intel_hdmi: Switch to __pm_runtime_put_autosuspend()
>   soc: apple: mailbox: Switch to __pm_runtime_put_autosuspend()
>
>  drivers/accel/ivpu/ivpu_drv.c                 |   2 +-
>  drivers/accel/ivpu/ivpu_pm.c                  |   8 +-
>  drivers/bluetooth/btmtksdio.c                 |   2 +-
>  drivers/bluetooth/hci_bcm.c                   |   6 +-
>  drivers/bluetooth/hci_h5.c                    |   4 +-
>  drivers/bluetooth/hci_intel.c                 |   6 +-
>  drivers/bus/sunxi-rsb.c                       |   4 +-
>  drivers/char/hw_random/cctrng.c               |   2 +-
>  drivers/char/hw_random/omap3-rom-rng.c        |   2 +-
>  drivers/clk/imx/clk-imx8qxp-lpcg.c            |   2 +-
>  drivers/clk/imx/clk-scu.c                     |   2 +-
>  drivers/clk/qcom/lpassaudiocc-sc7280.c        |   4 +-
>  drivers/clk/qcom/lpasscorecc-sc7180.c         |   4 +-
>  drivers/crypto/ccree/cc_pm.c                  |   2 +-
>  drivers/crypto/hisilicon/qm.c                 |   2 +-
>  drivers/crypto/omap-aes-gcm.c                 |   2 +-
>  drivers/crypto/omap-aes.c                     |   2 +-
>  drivers/crypto/omap-des.c                     |   2 +-
>  drivers/crypto/omap-sham.c                    |   2 +-
>  drivers/crypto/rockchip/rk3288_crypto_ahash.c |   2 +-
>  .../crypto/rockchip/rk3288_crypto_skcipher.c  |   2 +-
>  drivers/crypto/stm32/stm32-crc32.c            |   4 +-
>  drivers/crypto/stm32/stm32-cryp.c             |   2 +-
>  drivers/crypto/stm32/stm32-hash.c             |   2 +-
>  drivers/dma/at_xdmac.c                        |  24 +--
>  drivers/dma/pl330.c                           |  14 +-
>  drivers/dma/qcom/bam_dma.c                    |  10 +-
>  drivers/dma/qcom/hidma.c                      |  18 +-
>  drivers/dma/qcom/hidma_dbg.c                  |   2 +-
>  drivers/dma/qcom/hidma_mgmt.c                 |   4 +-
>  drivers/dma/ste_dma40.c                       |  16 +-
>  drivers/dma/ti/cppi41.c                       |  10 +-
>  drivers/dma/xilinx/zynqmp_dma.c               |   2 +-
>  drivers/gpio/gpio-arizona.c                   |  10 +-
>  drivers/gpio/gpio-mxc.c                       |   2 +-
>  drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c      |   2 +-
>  .../gpu/drm/amd/amdgpu/amdgpu_connectors.c    |  16 +-
>  drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c   | 120 ++++++------
>  drivers/gpu/drm/amd/amdgpu/amdgpu_display.c   |   2 +-
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c       |   6 +-
>  drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c     |   6 +-
>  drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c       |   4 +-
>  drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c       |   4 +-
>  drivers/gpu/drm/amd/amdgpu/amdgpu_rap.c       |   4 +-
>  drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c       |   2 +-
>  .../gpu/drm/amd/amdgpu/amdgpu_securedisplay.c |   4 +-
>  drivers/gpu/drm/amd/amdkfd/kfd_process.c      |   4 +-
>  .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   2 +-
>  drivers/gpu/drm/amd/pm/amdgpu_pm.c            | 178 +++++++++---------
>  .../drm/bridge/analogix/analogix_dp_core.c    |   2 +-
>  drivers/gpu/drm/bridge/analogix/anx7625.c     |   4 +-
>  drivers/gpu/drm/bridge/parade-ps8640.c        |   4 +-
>  drivers/gpu/drm/bridge/ti-sn65dsi86.c         |  14 +-
>  drivers/gpu/drm/etnaviv/etnaviv_gpu.c         |  12 +-
>  drivers/gpu/drm/exynos/exynos_drm_fimc.c      |   4 +-
>  drivers/gpu/drm/exynos/exynos_drm_g2d.c       |   4 +-
>  drivers/gpu/drm/exynos/exynos_drm_gsc.c       |   6 +-
>  drivers/gpu/drm/exynos/exynos_drm_rotator.c   |   2 +-
>  drivers/gpu/drm/exynos/exynos_drm_scaler.c    |   2 +-
>  drivers/gpu/drm/i915/intel_runtime_pm.c       |   4 +-
>  drivers/gpu/drm/imx/dcss/dcss-crtc.c          |   2 +-
>  drivers/gpu/drm/lima/lima_sched.c             |   2 +-
>  drivers/gpu/drm/msm/adreno/adreno_device.c    |   2 +-
>  drivers/gpu/drm/msm/adreno/adreno_gpu.c       |   2 +-
>  drivers/gpu/drm/msm/msm_gpu.c                 |   2 +-
>  drivers/gpu/drm/msm/msm_iommu.c               |   4 +-
>  drivers/gpu/drm/msm/msm_submitqueue.c         |   2 +-
>  drivers/gpu/drm/nouveau/dispnv50/disp.c       |  10 +-
>  drivers/gpu/drm/nouveau/nouveau_connector.c   |   4 +-
>  drivers/gpu/drm/nouveau/nouveau_debugfs.c     |   8 +-
>  drivers/gpu/drm/nouveau/nouveau_display.c     |   4 +-
>  drivers/gpu/drm/nouveau/nouveau_drm.c         |  10 +-
>  drivers/gpu/drm/nouveau/nouveau_gem.c         |  10 +-
>  drivers/gpu/drm/panel/panel-edp.c             |   8 +-
>  .../gpu/drm/panel/panel-samsung-atna33xc20.c  |   6 +-
>  drivers/gpu/drm/panel/panel-simple.c          |   6 +-
>  drivers/gpu/drm/panfrost/panfrost_job.c       |   4 +-
>  drivers/gpu/drm/panfrost/panfrost_mmu.c       |   4 +-
>  drivers/gpu/drm/panfrost/panfrost_perfcnt.c   |   4 +-
>  drivers/gpu/drm/panthor/panthor_device.c      |   2 +-
>  drivers/gpu/drm/panthor/panthor_sched.c       |   6 +-
>  drivers/gpu/drm/radeon/radeon_acpi.c          |   2 +-
>  drivers/gpu/drm/radeon/radeon_connectors.c    |  20 +-
>  drivers/gpu/drm/radeon/radeon_display.c       |   6 +-
>  drivers/gpu/drm/radeon/radeon_drv.c           |   4 +-
>  drivers/gpu/drm/radeon/radeon_fbdev.c         |   4 +-
>  drivers/gpu/drm/radeon/radeon_kms.c           |  10 +-
>  drivers/gpu/drm/tegra/submit.c                |   2 +-
>  drivers/gpu/drm/tidss/tidss_drv.c             |   2 +-
>  drivers/gpu/drm/vc4/vc4_v3d.c                 |   2 +-
>  drivers/hsi/controllers/omap_ssi_port.c       |  42 ++---
>  drivers/hwtracing/stm/core.c                  |   8 +-
>  drivers/i2c/busses/i2c-amd-mp2-pci.c          |   2 +-
>  drivers/i2c/busses/i2c-amd-mp2.h              |   2 +-
>  drivers/i2c/busses/i2c-at91-master.c          |   2 +-
>  drivers/i2c/busses/i2c-cadence.c              |   2 +-
>  drivers/i2c/busses/i2c-davinci.c              |   4 +-
>  drivers/i2c/busses/i2c-designware-master.c    |   2 +-
>  drivers/i2c/busses/i2c-designware-pcidrv.c    |   2 +-
>  drivers/i2c/busses/i2c-hix5hd2.c              |   2 +-
>  drivers/i2c/busses/i2c-i801.c                 |   4 +-
>  drivers/i2c/busses/i2c-img-scb.c              |   6 +-
>  drivers/i2c/busses/i2c-imx-lpi2c.c            |   6 +-
>  drivers/i2c/busses/i2c-imx.c                  |   4 +-
>  drivers/i2c/busses/i2c-mv64xxx.c              |   2 +-
>  drivers/i2c/busses/i2c-nvidia-gpu.c           |   4 +-
>  drivers/i2c/busses/i2c-omap.c                 |   6 +-
>  drivers/i2c/busses/i2c-qcom-cci.c             |   2 +-
>  drivers/i2c/busses/i2c-qcom-geni.c            |   2 +-
>  drivers/i2c/busses/i2c-qup.c                  |   4 +-
>  drivers/i2c/busses/i2c-riic.c                 |   4 +-
>  drivers/i2c/busses/i2c-rzv2m.c                |   2 +-
>  drivers/i2c/busses/i2c-sprd.c                 |   4 +-
>  drivers/i2c/busses/i2c-stm32f7.c              |  10 +-
>  drivers/i2c/busses/i2c-xiic.c                 |   2 +-
>  drivers/i3c/master/dw-i3c-master.c            |  16 +-
>  drivers/i3c/master/svc-i3c-master.c           |  16 +-
>  drivers/iio/accel/bmc150-accel-core.c         |   2 +-
>  drivers/iio/accel/bmi088-accel-core.c         |   6 +-
>  drivers/iio/accel/fxls8962af-core.c           |   2 +-
>  drivers/iio/accel/kxcjk-1013.c                |   2 +-
>  drivers/iio/accel/kxsd9.c                     |   6 +-
>  drivers/iio/accel/mma8452.c                   |   2 +-
>  drivers/iio/accel/mma9551_core.c              |   2 +-
>  drivers/iio/accel/msa311.c                    |  12 +-
>  drivers/iio/adc/ab8500-gpadc.c                |   2 +-
>  drivers/iio/adc/at91-sama5d2_adc.c            |  20 +-
>  drivers/iio/adc/rcar-gyroadc.c                |   2 +-
>  drivers/iio/adc/stm32-adc-core.c              |   2 +-
>  drivers/iio/adc/stm32-adc.c                   |  12 +-
>  drivers/iio/adc/sun4i-gpadc-iio.c             |   4 +-
>  drivers/iio/adc/ti-ads1015.c                  |   2 +-
>  drivers/iio/adc/ti-ads1100.c                  |   2 +-
>  drivers/iio/adc/ti-ads1119.c                  |   4 +-
>  drivers/iio/chemical/atlas-sensor.c           |   4 +-
>  .../common/hid-sensors/hid-sensor-trigger.c   |   2 +-
>  drivers/iio/dac/stm32-dac.c                   |   6 +-
>  drivers/iio/gyro/bmg160_core.c                |   2 +-
>  drivers/iio/gyro/fxas21002c_core.c            |   2 +-
>  drivers/iio/gyro/mpu3050-core.c               |   6 +-
>  drivers/iio/gyro/mpu3050-i2c.c                |   2 +-
>  .../iio/imu/inv_icm42600/inv_icm42600_accel.c |  10 +-
>  .../imu/inv_icm42600/inv_icm42600_buffer.c    |   2 +-
>  .../iio/imu/inv_icm42600/inv_icm42600_gyro.c  |  10 +-
>  .../iio/imu/inv_icm42600/inv_icm42600_temp.c  |   2 +-
>  drivers/iio/imu/inv_mpu6050/inv_mpu_core.c    |  14 +-
>  drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c |   4 +-
>  drivers/iio/imu/kmx61.c                       |   2 +-
>  drivers/iio/light/apds9306.c                  |   6 +-
>  drivers/iio/light/apds9960.c                  |   4 +-
>  drivers/iio/light/bh1780.c                    |   2 +-
>  drivers/iio/light/gp2ap002.c                  |   4 +-
>  drivers/iio/light/isl29028.c                  |   2 +-
>  drivers/iio/light/ltrf216a.c                  |   2 +-
>  drivers/iio/light/pa12203001.c                |   2 +-
>  drivers/iio/light/rpr0521.c                   |   2 +-
>  drivers/iio/light/tsl2583.c                   |   2 +-
>  drivers/iio/light/tsl2591.c                   |   4 +-
>  drivers/iio/light/us5182d.c                   |   2 +-
>  drivers/iio/light/vcnl4000.c                  |   2 +-
>  drivers/iio/light/vcnl4035.c                  |   2 +-
>  drivers/iio/magnetometer/af8133j.c            |   4 +-
>  drivers/iio/magnetometer/ak8974.c             |   4 +-
>  drivers/iio/magnetometer/ak8975.c             |   2 +-
>  drivers/iio/magnetometer/bmc150_magn.c        |   2 +-
>  drivers/iio/magnetometer/tmag5273.c           |   4 +-
>  drivers/iio/magnetometer/yamaha-yas530.c      |   4 +-
>  drivers/iio/pressure/bmp280-core.c            |  10 +-
>  drivers/iio/pressure/icp10100.c               |   2 +-
>  drivers/iio/pressure/mpl115.c                 |   4 +-
>  drivers/iio/pressure/zpa2326.c                |   4 +-
>  .../iio/proximity/pulsedlight-lidar-lite-v2.c |   2 +-
>  drivers/iio/proximity/srf04.c                 |   2 +-
>  drivers/iio/temperature/mlx90614.c            |   4 +-
>  drivers/iio/temperature/mlx90632.c            |   4 +-
>  drivers/iio/temperature/mlx90635.c            |   4 +-
>  drivers/input/keyboard/omap4-keypad.c         |   8 +-
>  drivers/input/misc/cs40l50-vibra.c            |   8 +-
>  drivers/iommu/arm/arm-smmu/arm-smmu.c         |   2 +-
>  drivers/irqchip/irq-imx-irqsteer.c            |   2 +-
>  drivers/mailbox/mtk-cmdq-mailbox.c            |  10 +-
>  drivers/media/i2c/alvium-csi2.c               |   2 +-
>  drivers/media/i2c/ccs/ccs-core.c              |  10 +-
>  drivers/media/i2c/dw9719.c                    |   2 +-
>  drivers/media/i2c/gc0308.c                    |   6 +-
>  drivers/media/i2c/gc2145.c                    |   8 +-
>  drivers/media/i2c/imx283.c                    |   6 +-
>  drivers/media/i2c/imx290.c                    |   6 +-
>  drivers/media/i2c/imx296.c                    |   4 +-
>  drivers/media/i2c/imx415.c                    |   4 +-
>  drivers/media/i2c/mt9m114.c                   |  12 +-
>  drivers/media/i2c/ov2680.c                    |   2 +-
>  drivers/media/i2c/ov4689.c                    |   6 +-
>  drivers/media/i2c/ov5640.c                    |   8 +-
>  drivers/media/i2c/ov5645.c                    |   6 +-
>  drivers/media/i2c/ov5693.c                    |   2 +-
>  drivers/media/i2c/ov64a40.c                   |   8 +-
>  drivers/media/i2c/ov7251.c                    |   2 +-
>  drivers/media/i2c/ov8858.c                    |   4 +-
>  drivers/media/i2c/thp7312.c                   |   8 +-
>  drivers/media/i2c/video-i2c.c                 |   8 +-
>  .../media/platform/nvidia/tegra-vde/h264.c    |   4 +-
>  drivers/media/platform/qcom/venus/vdec.c      |   4 +-
>  drivers/media/platform/qcom/venus/venc.c      |   4 +-
>  .../platform/raspberrypi/pisp_be/pisp_be.c    |   4 +-
>  .../media/platform/st/sti/delta/delta-v4l2.c  |   4 +-
>  drivers/media/platform/st/sti/hva/hva-hw.c    |   8 +-
>  .../media/platform/verisilicon/hantro_drv.c   |   2 +-
>  drivers/media/rc/gpio-ir-recv.c               |   2 +-
>  drivers/mfd/arizona-irq.c                     |   2 +-
>  drivers/mfd/cs40l50-core.c                    |   2 +-
>  drivers/mfd/cs42l43.c                         |   2 +-
>  drivers/misc/mei/client.c                     |  14 +-
>  drivers/mmc/core/core.c                       |   4 +-
>  drivers/mmc/host/atmel-mci.c                  |   4 +-
>  drivers/mmc/host/dw_mmc-rockchip.c            |   2 +-
>  drivers/mmc/host/dw_mmc.c                     |   2 +-
>  drivers/mmc/host/mmci.c                       |   2 +-
>  drivers/mmc/host/omap_hsmmc.c                 |   6 +-
>  drivers/mmc/host/sdhci-msm.c                  |   2 +-
>  drivers/mmc/host/sdhci-of-at91.c              |   2 +-
>  drivers/mmc/host/sdhci-omap.c                 |   4 +-
>  drivers/mmc/host/sdhci-pci-core.c             |   2 +-
>  drivers/mmc/host/sdhci-pxav3.c                |   6 +-
>  drivers/mmc/host/sdhci-sprd.c                 |   2 +-
>  drivers/mmc/host/sdhci-xenon.c                |   2 +-
>  drivers/mmc/host/sdhci_am654.c                |   2 +-
>  drivers/mmc/host/tmio_mmc_core.c              |   2 +-
>  drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c    |  10 +-
>  drivers/net/ethernet/cadence/macb_main.c      |  10 +-
>  drivers/net/ethernet/freescale/fec_main.c     |  16 +-
>  drivers/net/ethernet/renesas/ravb_main.c      |   8 +-
>  drivers/net/ethernet/ti/davinci_mdio.c        |  14 +-
>  drivers/net/ipa/ipa_interrupt.c               |   2 +-
>  drivers/net/ipa/ipa_main.c                    |   2 +-
>  drivers/net/ipa/ipa_modem.c                   |   8 +-
>  drivers/net/ipa/ipa_smp2p.c                   |   4 +-
>  drivers/net/ipa/ipa_uc.c                      |   4 +-
>  drivers/net/wireless/ath/wil6210/pm.c         |   2 +-
>  drivers/net/wireless/ti/wl18xx/debugfs.c      |   6 +-
>  drivers/net/wireless/ti/wlcore/cmd.c          |   2 +-
>  drivers/net/wireless/ti/wlcore/debugfs.c      |  22 +--
>  drivers/net/wireless/ti/wlcore/main.c         |  72 +++----
>  drivers/net/wireless/ti/wlcore/scan.c         |   2 +-
>  drivers/net/wireless/ti/wlcore/sysfs.c        |   2 +-
>  drivers/net/wireless/ti/wlcore/testmode.c     |   4 +-
>  drivers/net/wireless/ti/wlcore/tx.c           |   2 +-
>  drivers/net/wireless/ti/wlcore/vendor_cmd.c   |   6 +-
>  drivers/net/wwan/qcom_bam_dmux.c              |   4 +-
>  drivers/net/wwan/t7xx/t7xx_hif_cldma.c        |   6 +-
>  drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c    |   6 +-
>  drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c    |   4 +-
>  drivers/nfc/trf7970a.c                        |   2 +-
>  drivers/pci/pcie/portdrv.c                    |   2 +-
>  drivers/phy/motorola/phy-mapphone-mdm6600.c   |   4 +-
>  drivers/phy/ti/phy-twl4030-usb.c              |   8 +-
>  drivers/power/supply/bq24190_charger.c        |  28 +--
>  drivers/power/supply/twl4030_charger.c        |   2 +-
>  drivers/pwm/pwm-img.c                         |   4 +-
>  drivers/regulator/stm32-vrefbuf.c             |  12 +-
>  drivers/remoteproc/omap_remoteproc.c          |   6 +-
>  drivers/slimbus/core.c                        |   2 +-
>  drivers/slimbus/messaging.c                   |   4 +-
>  drivers/soc/apple/mailbox.c                   |   2 +-
>  drivers/soundwire/bus.c                       |   2 +-
>  drivers/soundwire/cadence_master.c            |   2 +-
>  drivers/soundwire/qcom.c                      |   6 +-
>  drivers/spi/atmel-quadspi.c                   |  10 +-
>  drivers/spi/spi-cadence-quadspi.c             |   4 +-
>  drivers/spi/spi-cadence.c                     |   2 +-
>  drivers/spi/spi-dw-pci.c                      |   2 +-
>  drivers/spi/spi-fsl-espi.c                    |   4 +-
>  drivers/spi/spi-fsl-lpspi.c                   |   4 +-
>  drivers/spi/spi-imx.c                         |   6 +-
>  drivers/spi/spi-mtk-nor.c                     |   2 +-
>  drivers/spi/spi-omap2-mcspi.c                 |   6 +-
>  drivers/spi/spi-pxa2xx-pci.c                  |   2 +-
>  drivers/spi/spi-s3c64xx.c                     |   6 +-
>  drivers/spi/spi-sprd.c                        |   2 +-
>  drivers/spi/spi-stm32-qspi.c                  |  14 +-
>  drivers/spi/spi-stm32.c                       |   4 +-
>  drivers/spi/spi-ti-qspi.c                     |   4 +-
>  drivers/spi/spi-zynqmp-gqspi.c                |   2 +-
>  drivers/spi/spi.c                             |   6 +-
>  drivers/staging/greybus/gbphy.h               |   2 +-
>  drivers/staging/media/rkvdec/rkvdec.c         |   2 +-
>  drivers/thunderbolt/debugfs.c                 |  22 +--
>  drivers/thunderbolt/domain.c                  |   4 +-
>  drivers/thunderbolt/icm.c                     |  14 +-
>  drivers/thunderbolt/nhi.c                     |   2 +-
>  drivers/thunderbolt/retimer.c                 |   4 +-
>  drivers/thunderbolt/switch.c                  |   6 +-
>  drivers/thunderbolt/tb.c                      |  18 +-
>  drivers/thunderbolt/usb4_port.c               |   4 +-
>  drivers/tty/serial/8250/8250_omap.c           |  18 +-
>  drivers/tty/serial/8250/8250_port.c           |   4 +-
>  drivers/tty/serial/fsl_lpuart.c               |   2 +-
>  drivers/tty/serial/serial_core.c              |   2 +-
>  drivers/tty/serial/uartlite.c                 |   4 +-
>  drivers/tty/serial/xilinx_uartps.c            |   2 +-
>  drivers/usb/cdns3/cdns3-gadget.c              |   2 +-
>  drivers/usb/cdns3/cdnsp-gadget.c              |   2 +-
>  drivers/usb/chipidea/core.c                   |   2 +-
>  drivers/usb/chipidea/otg_fsm.c                |   2 +-
>  drivers/usb/dwc3/core.c                       |   2 +-
>  drivers/usb/dwc3/dwc3-am62.c                  |   2 +-
>  drivers/usb/dwc3/dwc3-imx8mp.c                |   2 +-
>  drivers/usb/gadget/udc/cdns2/cdns2-gadget.c   |   2 +-
>  drivers/usb/host/xhci-mtk.c                   |   2 +-
>  drivers/usb/misc/apple-mfi-fastcharge.c       |   2 +-
>  drivers/usb/mtu3/mtu3_plat.c                  |   2 +-
>  drivers/usb/musb/musb_core.c                  |  10 +-
>  drivers/usb/musb/musb_debugfs.c               |  10 +-
>  drivers/usb/musb/musb_dsps.c                  |   2 +-
>  drivers/usb/musb/musb_gadget.c                |   8 +-
>  drivers/usb/musb/omap2430.c                   |   2 +-
>  drivers/w1/masters/omap_hdq.c                 |  10 +-
>  include/linux/greybus/bundle.h                |   2 +-
>  sound/hda/hdac_device.c                       |   2 +-
>  sound/pci/hda/cs35l41_hda.c                   |   8 +-
>  sound/pci/hda/cs35l56_hda.c                   |   2 +-
>  sound/pci/hda/hda_intel.c                     |   2 +-
>  sound/pci/hda/tas2781_hda_i2c.c               |   6 +-
>  sound/soc/atmel/mchp-spdifrx.c                |  12 +-
>  sound/soc/codecs/arizona-jack.c               |  12 +-
>  sound/soc/codecs/arizona.c                    |   2 +-
>  sound/soc/codecs/cs35l41.c                    |   4 +-
>  sound/soc/codecs/cs35l45.c                    |   2 +-
>  sound/soc/codecs/cs35l56-sdw.c                |   4 +-
>  sound/soc/codecs/cs35l56-shared.c             |   2 +-
>  sound/soc/codecs/cs35l56.c                    |   2 +-
>  sound/soc/codecs/cs42l42-sdw.c                |   2 +-
>  sound/soc/codecs/cs42l42.c                    |   4 +-
>  sound/soc/codecs/cs42l43-jack.c               |  10 +-
>  sound/soc/codecs/cs42l43.c                    |   4 +-
>  sound/soc/codecs/hda.c                        |   6 +-
>  sound/soc/codecs/madera.c                     |   6 +-
>  sound/soc/codecs/max98363.c                   |   2 +-
>  sound/soc/codecs/max98373-sdw.c               |   2 +-
>  sound/soc/codecs/rt1017-sdca-sdw.c            |   2 +-
>  sound/soc/codecs/rt1308-sdw.c                 |   2 +-
>  sound/soc/codecs/rt1316-sdw.c                 |   2 +-
>  sound/soc/codecs/rt1318-sdw.c                 |   2 +-
>  sound/soc/codecs/rt1320-sdw.c                 |   2 +-
>  sound/soc/codecs/rt5682-sdw.c                 |   2 +-
>  sound/soc/codecs/rt700.c                      |   4 +-
>  sound/soc/codecs/rt711-sdca.c                 |   4 +-
>  sound/soc/codecs/rt711.c                      |   4 +-
>  sound/soc/codecs/rt712-sdca-dmic.c            |   2 +-
>  sound/soc/codecs/rt712-sdca.c                 |   4 +-
>  sound/soc/codecs/rt715-sdca.c                 |   2 +-
>  sound/soc/codecs/rt715.c                      |   2 +-
>  sound/soc/codecs/rt722-sdca.c                 |   4 +-
>  sound/soc/codecs/wcd-mbhc-v2.c                |   4 +-
>  sound/soc/codecs/wsa881x.c                    |   2 +-
>  sound/soc/codecs/wsa884x.c                    |   2 +-
>  sound/soc/intel/atom/sst/sst_pvt.c            |   2 +-
>  sound/soc/intel/avs/core.c                    |   2 +-
>  sound/soc/intel/avs/debugfs.c                 |   4 +-
>  sound/soc/intel/avs/pcm.c                     |   2 +-
>  sound/soc/intel/catpt/pcm.c                   |  12 +-
>  sound/soc/intel/catpt/sysfs.c                 |   2 +-
>  sound/soc/soc-component.c                     |   2 +-
>  sound/soc/sof/control.c                       |   2 +-
>  sound/soc/sof/debug.c                         |   2 +-
>  sound/soc/sof/ipc3-dtrace.c                   |   2 +-
>  sound/soc/sof/ipc4-loader.c                   |   2 +-
>  sound/soc/sof/pcm.c                           |   2 +-
>  sound/soc/sof/sof-client-ipc-flood-test.c     |   2 +-
>  .../soc/sof/sof-client-ipc-kernel-injector.c  |   2 +-
>  sound/soc/sof/sof-client-ipc-msg-injector.c   |   2 +-
>  sound/soc/sof/sof-client-probes.c             |   6 +-
>  sound/x86/intel_hdmi_audio.c                  |   6 +-
>  373 files changed, 1076 insertions(+), 1076 deletions(-)
>
> --
> 2.39.5
>
>

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-04 14:38 ` [PATCH 00/51] treewide: " Ulf Hansson
@ 2024-10-07 18:49   ` Laurent Pinchart
  2024-10-07 22:08     ` Ulf Hansson
  2024-10-08 20:38     ` Uwe Kleine-König
  0 siblings, 2 replies; 19+ messages in thread
From: Laurent Pinchart @ 2024-10-07 18:49 UTC (permalink / raw)
  To: Ulf Hansson
  Cc: Sakari Ailus, dri-devel, linux-kernel, linux-bluetooth, linux-clk,
	linux-crypto, dmaengine, linux-gpio, amd-gfx, nouveau,
	linux-stm32, linux-arm-kernel, linux-i2c, linux-i3c, linux-iio,
	linux-input, patches, iommu, imx, linux-mediatek, linux-media,
	linux-mmc, linux-mtd, netdev, linux-wireless, linux-pci,
	linux-phy, linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
	rafael, Andy Shevchenko

Hi Ulf,

On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> On Fri, 4 Oct 2024 at 11:41, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
> >
> > Hello everyone,
> >
> > This set will switch the users of pm_runtime_put_autosuspend() to
> > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > always used together, apart from bugs which are likely common. Going
> > forward, most new users should be using pm_runtime_put_autosuspend().
> >
> > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > and pm_runtime_mark_last_busy().
> 
> That sounds like it could cause a lot of churns.
> 
> Why not add a new helper function that does the
> pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> things? Then we can start moving users over to this new interface,
> rather than having this intermediate step?

I think the API would be nicer if we used the shortest and simplest
function names for the most common use cases. Following
pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
most common use case. That's why I like Sakari's approach of repurposing
pm_runtime_put_autosuspend(), and introducing
__pm_runtime_put_autosuspend() for the odd cases where
pm_runtime_mark_last_busy() shouldn't be called.

> > The diff in these patches have been generated using the following
> > Coccinelle script (besides a manual change in
> > drivers/iio/magnetometer/af8133j.c):
> >
> > ----------8<-------------------
> > @@
> > expression E1;
> >
> > @@
> >
> > - pm_runtime_put_autosuspend(E1)
> > + __pm_runtime_put_autosuspend(E1)
> > ----------8<-------------------
> >
> > These patches are on top of today's linux-next (i.e. next-20241004).
> >
> > Sakari Ailus (51):
> >   accel/ivpu: Switch to __pm_runtime_put_autosuspend()
> >   bluetooth: Switch to __pm_runtime_put_autosuspend()
> >   bus: sunxi-rsb: Switch to __pm_runtime_put_autosuspend()
> >   hwrng: Switch to __pm_runtime_put_autosuspend()
> >   clk: Switch to __pm_runtime_put_autosuspend()
> >   crypto: Switch to __pm_runtime_put_autosuspend()
> >   dmaengine: Switch to __pm_runtime_put_autosuspend()
> >   gpio: Switch to __pm_runtime_put_autosuspend()
> >   drm/amd: Switch to __pm_runtime_put_autosuspend()
> >   drm/nouveau: Switch to __pm_runtime_put_autosuspend()
> >   drm/radeon: Switch to __pm_runtime_put_autosuspend()
> >   drm/panfrost: Switch to __pm_runtime_put_autosuspend()
> >   drivers: drm: Switch to __pm_runtime_put_autosuspend()
> >   HSI: omap_ssi_port: Switch to __pm_runtime_put_autosuspend()
> >   stm class: Switch to __pm_runtime_put_autosuspend()
> >   i2c: Switch to __pm_runtime_put_autosuspend()
> >   i3c: master: svc: Switch to __pm_runtime_put_autosuspend()
> >   i3c: dw: Switch to __pm_runtime_put_autosuspend()
> >   iio: Switch to __pm_runtime_put_autosuspend()
> >   Input: omap4-keypad: Switch to __pm_runtime_put_autosuspend()
> >   Input: cs40l50: Switch to __pm_runtime_put_autosuspend()
> >   iommu/arm-smmu: Switch to __pm_runtime_put_autosuspend()
> >   irqchip/imx-irqsteer: Switch to __pm_runtime_put_autosuspend()
> >   mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend()
> >   media: Switch to __pm_runtime_put_autosuspend()
> >   mfd: Switch to __pm_runtime_put_autosuspend()
> >   mei: Switch to __pm_runtime_put_autosuspend()
> >   mmc: Switch to __pm_runtime_put_autosuspend()
> >   mtd: rawnand: gpmi: Switch to __pm_runtime_put_autosuspend()
> >   net: Switch to __pm_runtime_put_autosuspend()
> >   nfc: trf7970a: Switch to __pm_runtime_put_autosuspend()
> >   PCI/portdrv: Switch to __pm_runtime_put_autosuspend()
> >   phy: motorola: phy-mapphone-mdm6600: Switch to
> >     __pm_runtime_put_autosuspend()
> >   phy: ti: phy-twl4030-usb: Switch to __pm_runtime_put_autosuspend()
> >   power: Switch to __pm_runtime_put_autosuspend()
> >   pwm: img: Switch to __pm_runtime_put_autosuspend()
> >   regulator: stm32-vrefbuf: Switch to __pm_runtime_put_autosuspend()
> >   remoteproc: omap: Switch to __pm_runtime_put_autosuspend()
> >   slimbus: Switch to __pm_runtime_put_autosuspend()
> >   soundwire: Switch to __pm_runtime_put_autosuspend()
> >   spi: Switch to __pm_runtime_put_autosuspend()
> >   staging: Switch to __pm_runtime_put_autosuspend()
> >   thunderbolt: Switch to __pm_runtime_put_autosuspend()
> >   serial: Switch to __pm_runtime_put_autosuspend()
> >   usb: Switch to __pm_runtime_put_autosuspend()
> >   w1: omap-hdq: Switch to __pm_runtime_put_autosuspend()
> >   staging: greybus: Switch to __pm_runtime_put_autosuspend()
> >   ALSA: hda: Switch to __pm_runtime_put_autosuspend()
> >   ASoC: Switch to __pm_runtime_put_autosuspend()
> >   ALSA: intel_hdmi: Switch to __pm_runtime_put_autosuspend()
> >   soc: apple: mailbox: Switch to __pm_runtime_put_autosuspend()
> >
> >  drivers/accel/ivpu/ivpu_drv.c                 |   2 +-
> >  drivers/accel/ivpu/ivpu_pm.c                  |   8 +-
> >  drivers/bluetooth/btmtksdio.c                 |   2 +-
> >  drivers/bluetooth/hci_bcm.c                   |   6 +-
> >  drivers/bluetooth/hci_h5.c                    |   4 +-
> >  drivers/bluetooth/hci_intel.c                 |   6 +-
> >  drivers/bus/sunxi-rsb.c                       |   4 +-
> >  drivers/char/hw_random/cctrng.c               |   2 +-
> >  drivers/char/hw_random/omap3-rom-rng.c        |   2 +-
> >  drivers/clk/imx/clk-imx8qxp-lpcg.c            |   2 +-
> >  drivers/clk/imx/clk-scu.c                     |   2 +-
> >  drivers/clk/qcom/lpassaudiocc-sc7280.c        |   4 +-
> >  drivers/clk/qcom/lpasscorecc-sc7180.c         |   4 +-
> >  drivers/crypto/ccree/cc_pm.c                  |   2 +-
> >  drivers/crypto/hisilicon/qm.c                 |   2 +-
> >  drivers/crypto/omap-aes-gcm.c                 |   2 +-
> >  drivers/crypto/omap-aes.c                     |   2 +-
> >  drivers/crypto/omap-des.c                     |   2 +-
> >  drivers/crypto/omap-sham.c                    |   2 +-
> >  drivers/crypto/rockchip/rk3288_crypto_ahash.c |   2 +-
> >  .../crypto/rockchip/rk3288_crypto_skcipher.c  |   2 +-
> >  drivers/crypto/stm32/stm32-crc32.c            |   4 +-
> >  drivers/crypto/stm32/stm32-cryp.c             |   2 +-
> >  drivers/crypto/stm32/stm32-hash.c             |   2 +-
> >  drivers/dma/at_xdmac.c                        |  24 +--
> >  drivers/dma/pl330.c                           |  14 +-
> >  drivers/dma/qcom/bam_dma.c                    |  10 +-
> >  drivers/dma/qcom/hidma.c                      |  18 +-
> >  drivers/dma/qcom/hidma_dbg.c                  |   2 +-
> >  drivers/dma/qcom/hidma_mgmt.c                 |   4 +-
> >  drivers/dma/ste_dma40.c                       |  16 +-
> >  drivers/dma/ti/cppi41.c                       |  10 +-
> >  drivers/dma/xilinx/zynqmp_dma.c               |   2 +-
> >  drivers/gpio/gpio-arizona.c                   |  10 +-
> >  drivers/gpio/gpio-mxc.c                       |   2 +-
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c      |   2 +-
> >  .../gpu/drm/amd/amdgpu/amdgpu_connectors.c    |  16 +-
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c   | 120 ++++++------
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_display.c   |   2 +-
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c       |   6 +-
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c     |   6 +-
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c       |   4 +-
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c       |   4 +-
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_rap.c       |   4 +-
> >  drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c       |   2 +-
> >  .../gpu/drm/amd/amdgpu/amdgpu_securedisplay.c |   4 +-
> >  drivers/gpu/drm/amd/amdkfd/kfd_process.c      |   4 +-
> >  .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |   2 +-
> >  drivers/gpu/drm/amd/pm/amdgpu_pm.c            | 178 +++++++++---------
> >  .../drm/bridge/analogix/analogix_dp_core.c    |   2 +-
> >  drivers/gpu/drm/bridge/analogix/anx7625.c     |   4 +-
> >  drivers/gpu/drm/bridge/parade-ps8640.c        |   4 +-
> >  drivers/gpu/drm/bridge/ti-sn65dsi86.c         |  14 +-
> >  drivers/gpu/drm/etnaviv/etnaviv_gpu.c         |  12 +-
> >  drivers/gpu/drm/exynos/exynos_drm_fimc.c      |   4 +-
> >  drivers/gpu/drm/exynos/exynos_drm_g2d.c       |   4 +-
> >  drivers/gpu/drm/exynos/exynos_drm_gsc.c       |   6 +-
> >  drivers/gpu/drm/exynos/exynos_drm_rotator.c   |   2 +-
> >  drivers/gpu/drm/exynos/exynos_drm_scaler.c    |   2 +-
> >  drivers/gpu/drm/i915/intel_runtime_pm.c       |   4 +-
> >  drivers/gpu/drm/imx/dcss/dcss-crtc.c          |   2 +-
> >  drivers/gpu/drm/lima/lima_sched.c             |   2 +-
> >  drivers/gpu/drm/msm/adreno/adreno_device.c    |   2 +-
> >  drivers/gpu/drm/msm/adreno/adreno_gpu.c       |   2 +-
> >  drivers/gpu/drm/msm/msm_gpu.c                 |   2 +-
> >  drivers/gpu/drm/msm/msm_iommu.c               |   4 +-
> >  drivers/gpu/drm/msm/msm_submitqueue.c         |   2 +-
> >  drivers/gpu/drm/nouveau/dispnv50/disp.c       |  10 +-
> >  drivers/gpu/drm/nouveau/nouveau_connector.c   |   4 +-
> >  drivers/gpu/drm/nouveau/nouveau_debugfs.c     |   8 +-
> >  drivers/gpu/drm/nouveau/nouveau_display.c     |   4 +-
> >  drivers/gpu/drm/nouveau/nouveau_drm.c         |  10 +-
> >  drivers/gpu/drm/nouveau/nouveau_gem.c         |  10 +-
> >  drivers/gpu/drm/panel/panel-edp.c             |   8 +-
> >  .../gpu/drm/panel/panel-samsung-atna33xc20.c  |   6 +-
> >  drivers/gpu/drm/panel/panel-simple.c          |   6 +-
> >  drivers/gpu/drm/panfrost/panfrost_job.c       |   4 +-
> >  drivers/gpu/drm/panfrost/panfrost_mmu.c       |   4 +-
> >  drivers/gpu/drm/panfrost/panfrost_perfcnt.c   |   4 +-
> >  drivers/gpu/drm/panthor/panthor_device.c      |   2 +-
> >  drivers/gpu/drm/panthor/panthor_sched.c       |   6 +-
> >  drivers/gpu/drm/radeon/radeon_acpi.c          |   2 +-
> >  drivers/gpu/drm/radeon/radeon_connectors.c    |  20 +-
> >  drivers/gpu/drm/radeon/radeon_display.c       |   6 +-
> >  drivers/gpu/drm/radeon/radeon_drv.c           |   4 +-
> >  drivers/gpu/drm/radeon/radeon_fbdev.c         |   4 +-
> >  drivers/gpu/drm/radeon/radeon_kms.c           |  10 +-
> >  drivers/gpu/drm/tegra/submit.c                |   2 +-
> >  drivers/gpu/drm/tidss/tidss_drv.c             |   2 +-
> >  drivers/gpu/drm/vc4/vc4_v3d.c                 |   2 +-
> >  drivers/hsi/controllers/omap_ssi_port.c       |  42 ++---
> >  drivers/hwtracing/stm/core.c                  |   8 +-
> >  drivers/i2c/busses/i2c-amd-mp2-pci.c          |   2 +-
> >  drivers/i2c/busses/i2c-amd-mp2.h              |   2 +-
> >  drivers/i2c/busses/i2c-at91-master.c          |   2 +-
> >  drivers/i2c/busses/i2c-cadence.c              |   2 +-
> >  drivers/i2c/busses/i2c-davinci.c              |   4 +-
> >  drivers/i2c/busses/i2c-designware-master.c    |   2 +-
> >  drivers/i2c/busses/i2c-designware-pcidrv.c    |   2 +-
> >  drivers/i2c/busses/i2c-hix5hd2.c              |   2 +-
> >  drivers/i2c/busses/i2c-i801.c                 |   4 +-
> >  drivers/i2c/busses/i2c-img-scb.c              |   6 +-
> >  drivers/i2c/busses/i2c-imx-lpi2c.c            |   6 +-
> >  drivers/i2c/busses/i2c-imx.c                  |   4 +-
> >  drivers/i2c/busses/i2c-mv64xxx.c              |   2 +-
> >  drivers/i2c/busses/i2c-nvidia-gpu.c           |   4 +-
> >  drivers/i2c/busses/i2c-omap.c                 |   6 +-
> >  drivers/i2c/busses/i2c-qcom-cci.c             |   2 +-
> >  drivers/i2c/busses/i2c-qcom-geni.c            |   2 +-
> >  drivers/i2c/busses/i2c-qup.c                  |   4 +-
> >  drivers/i2c/busses/i2c-riic.c                 |   4 +-
> >  drivers/i2c/busses/i2c-rzv2m.c                |   2 +-
> >  drivers/i2c/busses/i2c-sprd.c                 |   4 +-
> >  drivers/i2c/busses/i2c-stm32f7.c              |  10 +-
> >  drivers/i2c/busses/i2c-xiic.c                 |   2 +-
> >  drivers/i3c/master/dw-i3c-master.c            |  16 +-
> >  drivers/i3c/master/svc-i3c-master.c           |  16 +-
> >  drivers/iio/accel/bmc150-accel-core.c         |   2 +-
> >  drivers/iio/accel/bmi088-accel-core.c         |   6 +-
> >  drivers/iio/accel/fxls8962af-core.c           |   2 +-
> >  drivers/iio/accel/kxcjk-1013.c                |   2 +-
> >  drivers/iio/accel/kxsd9.c                     |   6 +-
> >  drivers/iio/accel/mma8452.c                   |   2 +-
> >  drivers/iio/accel/mma9551_core.c              |   2 +-
> >  drivers/iio/accel/msa311.c                    |  12 +-
> >  drivers/iio/adc/ab8500-gpadc.c                |   2 +-
> >  drivers/iio/adc/at91-sama5d2_adc.c            |  20 +-
> >  drivers/iio/adc/rcar-gyroadc.c                |   2 +-
> >  drivers/iio/adc/stm32-adc-core.c              |   2 +-
> >  drivers/iio/adc/stm32-adc.c                   |  12 +-
> >  drivers/iio/adc/sun4i-gpadc-iio.c             |   4 +-
> >  drivers/iio/adc/ti-ads1015.c                  |   2 +-
> >  drivers/iio/adc/ti-ads1100.c                  |   2 +-
> >  drivers/iio/adc/ti-ads1119.c                  |   4 +-
> >  drivers/iio/chemical/atlas-sensor.c           |   4 +-
> >  .../common/hid-sensors/hid-sensor-trigger.c   |   2 +-
> >  drivers/iio/dac/stm32-dac.c                   |   6 +-
> >  drivers/iio/gyro/bmg160_core.c                |   2 +-
> >  drivers/iio/gyro/fxas21002c_core.c            |   2 +-
> >  drivers/iio/gyro/mpu3050-core.c               |   6 +-
> >  drivers/iio/gyro/mpu3050-i2c.c                |   2 +-
> >  .../iio/imu/inv_icm42600/inv_icm42600_accel.c |  10 +-
> >  .../imu/inv_icm42600/inv_icm42600_buffer.c    |   2 +-
> >  .../iio/imu/inv_icm42600/inv_icm42600_gyro.c  |  10 +-
> >  .../iio/imu/inv_icm42600/inv_icm42600_temp.c  |   2 +-
> >  drivers/iio/imu/inv_mpu6050/inv_mpu_core.c    |  14 +-
> >  drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c |   4 +-
> >  drivers/iio/imu/kmx61.c                       |   2 +-
> >  drivers/iio/light/apds9306.c                  |   6 +-
> >  drivers/iio/light/apds9960.c                  |   4 +-
> >  drivers/iio/light/bh1780.c                    |   2 +-
> >  drivers/iio/light/gp2ap002.c                  |   4 +-
> >  drivers/iio/light/isl29028.c                  |   2 +-
> >  drivers/iio/light/ltrf216a.c                  |   2 +-
> >  drivers/iio/light/pa12203001.c                |   2 +-
> >  drivers/iio/light/rpr0521.c                   |   2 +-
> >  drivers/iio/light/tsl2583.c                   |   2 +-
> >  drivers/iio/light/tsl2591.c                   |   4 +-
> >  drivers/iio/light/us5182d.c                   |   2 +-
> >  drivers/iio/light/vcnl4000.c                  |   2 +-
> >  drivers/iio/light/vcnl4035.c                  |   2 +-
> >  drivers/iio/magnetometer/af8133j.c            |   4 +-
> >  drivers/iio/magnetometer/ak8974.c             |   4 +-
> >  drivers/iio/magnetometer/ak8975.c             |   2 +-
> >  drivers/iio/magnetometer/bmc150_magn.c        |   2 +-
> >  drivers/iio/magnetometer/tmag5273.c           |   4 +-
> >  drivers/iio/magnetometer/yamaha-yas530.c      |   4 +-
> >  drivers/iio/pressure/bmp280-core.c            |  10 +-
> >  drivers/iio/pressure/icp10100.c               |   2 +-
> >  drivers/iio/pressure/mpl115.c                 |   4 +-
> >  drivers/iio/pressure/zpa2326.c                |   4 +-
> >  .../iio/proximity/pulsedlight-lidar-lite-v2.c |   2 +-
> >  drivers/iio/proximity/srf04.c                 |   2 +-
> >  drivers/iio/temperature/mlx90614.c            |   4 +-
> >  drivers/iio/temperature/mlx90632.c            |   4 +-
> >  drivers/iio/temperature/mlx90635.c            |   4 +-
> >  drivers/input/keyboard/omap4-keypad.c         |   8 +-
> >  drivers/input/misc/cs40l50-vibra.c            |   8 +-
> >  drivers/iommu/arm/arm-smmu/arm-smmu.c         |   2 +-
> >  drivers/irqchip/irq-imx-irqsteer.c            |   2 +-
> >  drivers/mailbox/mtk-cmdq-mailbox.c            |  10 +-
> >  drivers/media/i2c/alvium-csi2.c               |   2 +-
> >  drivers/media/i2c/ccs/ccs-core.c              |  10 +-
> >  drivers/media/i2c/dw9719.c                    |   2 +-
> >  drivers/media/i2c/gc0308.c                    |   6 +-
> >  drivers/media/i2c/gc2145.c                    |   8 +-
> >  drivers/media/i2c/imx283.c                    |   6 +-
> >  drivers/media/i2c/imx290.c                    |   6 +-
> >  drivers/media/i2c/imx296.c                    |   4 +-
> >  drivers/media/i2c/imx415.c                    |   4 +-
> >  drivers/media/i2c/mt9m114.c                   |  12 +-
> >  drivers/media/i2c/ov2680.c                    |   2 +-
> >  drivers/media/i2c/ov4689.c                    |   6 +-
> >  drivers/media/i2c/ov5640.c                    |   8 +-
> >  drivers/media/i2c/ov5645.c                    |   6 +-
> >  drivers/media/i2c/ov5693.c                    |   2 +-
> >  drivers/media/i2c/ov64a40.c                   |   8 +-
> >  drivers/media/i2c/ov7251.c                    |   2 +-
> >  drivers/media/i2c/ov8858.c                    |   4 +-
> >  drivers/media/i2c/thp7312.c                   |   8 +-
> >  drivers/media/i2c/video-i2c.c                 |   8 +-
> >  .../media/platform/nvidia/tegra-vde/h264.c    |   4 +-
> >  drivers/media/platform/qcom/venus/vdec.c      |   4 +-
> >  drivers/media/platform/qcom/venus/venc.c      |   4 +-
> >  .../platform/raspberrypi/pisp_be/pisp_be.c    |   4 +-
> >  .../media/platform/st/sti/delta/delta-v4l2.c  |   4 +-
> >  drivers/media/platform/st/sti/hva/hva-hw.c    |   8 +-
> >  .../media/platform/verisilicon/hantro_drv.c   |   2 +-
> >  drivers/media/rc/gpio-ir-recv.c               |   2 +-
> >  drivers/mfd/arizona-irq.c                     |   2 +-
> >  drivers/mfd/cs40l50-core.c                    |   2 +-
> >  drivers/mfd/cs42l43.c                         |   2 +-
> >  drivers/misc/mei/client.c                     |  14 +-
> >  drivers/mmc/core/core.c                       |   4 +-
> >  drivers/mmc/host/atmel-mci.c                  |   4 +-
> >  drivers/mmc/host/dw_mmc-rockchip.c            |   2 +-
> >  drivers/mmc/host/dw_mmc.c                     |   2 +-
> >  drivers/mmc/host/mmci.c                       |   2 +-
> >  drivers/mmc/host/omap_hsmmc.c                 |   6 +-
> >  drivers/mmc/host/sdhci-msm.c                  |   2 +-
> >  drivers/mmc/host/sdhci-of-at91.c              |   2 +-
> >  drivers/mmc/host/sdhci-omap.c                 |   4 +-
> >  drivers/mmc/host/sdhci-pci-core.c             |   2 +-
> >  drivers/mmc/host/sdhci-pxav3.c                |   6 +-
> >  drivers/mmc/host/sdhci-sprd.c                 |   2 +-
> >  drivers/mmc/host/sdhci-xenon.c                |   2 +-
> >  drivers/mmc/host/sdhci_am654.c                |   2 +-
> >  drivers/mmc/host/tmio_mmc_core.c              |   2 +-
> >  drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c    |  10 +-
> >  drivers/net/ethernet/cadence/macb_main.c      |  10 +-
> >  drivers/net/ethernet/freescale/fec_main.c     |  16 +-
> >  drivers/net/ethernet/renesas/ravb_main.c      |   8 +-
> >  drivers/net/ethernet/ti/davinci_mdio.c        |  14 +-
> >  drivers/net/ipa/ipa_interrupt.c               |   2 +-
> >  drivers/net/ipa/ipa_main.c                    |   2 +-
> >  drivers/net/ipa/ipa_modem.c                   |   8 +-
> >  drivers/net/ipa/ipa_smp2p.c                   |   4 +-
> >  drivers/net/ipa/ipa_uc.c                      |   4 +-
> >  drivers/net/wireless/ath/wil6210/pm.c         |   2 +-
> >  drivers/net/wireless/ti/wl18xx/debugfs.c      |   6 +-
> >  drivers/net/wireless/ti/wlcore/cmd.c          |   2 +-
> >  drivers/net/wireless/ti/wlcore/debugfs.c      |  22 +--
> >  drivers/net/wireless/ti/wlcore/main.c         |  72 +++----
> >  drivers/net/wireless/ti/wlcore/scan.c         |   2 +-
> >  drivers/net/wireless/ti/wlcore/sysfs.c        |   2 +-
> >  drivers/net/wireless/ti/wlcore/testmode.c     |   4 +-
> >  drivers/net/wireless/ti/wlcore/tx.c           |   2 +-
> >  drivers/net/wireless/ti/wlcore/vendor_cmd.c   |   6 +-
> >  drivers/net/wwan/qcom_bam_dmux.c              |   4 +-
> >  drivers/net/wwan/t7xx/t7xx_hif_cldma.c        |   6 +-
> >  drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c    |   6 +-
> >  drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c    |   4 +-
> >  drivers/nfc/trf7970a.c                        |   2 +-
> >  drivers/pci/pcie/portdrv.c                    |   2 +-
> >  drivers/phy/motorola/phy-mapphone-mdm6600.c   |   4 +-
> >  drivers/phy/ti/phy-twl4030-usb.c              |   8 +-
> >  drivers/power/supply/bq24190_charger.c        |  28 +--
> >  drivers/power/supply/twl4030_charger.c        |   2 +-
> >  drivers/pwm/pwm-img.c                         |   4 +-
> >  drivers/regulator/stm32-vrefbuf.c             |  12 +-
> >  drivers/remoteproc/omap_remoteproc.c          |   6 +-
> >  drivers/slimbus/core.c                        |   2 +-
> >  drivers/slimbus/messaging.c                   |   4 +-
> >  drivers/soc/apple/mailbox.c                   |   2 +-
> >  drivers/soundwire/bus.c                       |   2 +-
> >  drivers/soundwire/cadence_master.c            |   2 +-
> >  drivers/soundwire/qcom.c                      |   6 +-
> >  drivers/spi/atmel-quadspi.c                   |  10 +-
> >  drivers/spi/spi-cadence-quadspi.c             |   4 +-
> >  drivers/spi/spi-cadence.c                     |   2 +-
> >  drivers/spi/spi-dw-pci.c                      |   2 +-
> >  drivers/spi/spi-fsl-espi.c                    |   4 +-
> >  drivers/spi/spi-fsl-lpspi.c                   |   4 +-
> >  drivers/spi/spi-imx.c                         |   6 +-
> >  drivers/spi/spi-mtk-nor.c                     |   2 +-
> >  drivers/spi/spi-omap2-mcspi.c                 |   6 +-
> >  drivers/spi/spi-pxa2xx-pci.c                  |   2 +-
> >  drivers/spi/spi-s3c64xx.c                     |   6 +-
> >  drivers/spi/spi-sprd.c                        |   2 +-
> >  drivers/spi/spi-stm32-qspi.c                  |  14 +-
> >  drivers/spi/spi-stm32.c                       |   4 +-
> >  drivers/spi/spi-ti-qspi.c                     |   4 +-
> >  drivers/spi/spi-zynqmp-gqspi.c                |   2 +-
> >  drivers/spi/spi.c                             |   6 +-
> >  drivers/staging/greybus/gbphy.h               |   2 +-
> >  drivers/staging/media/rkvdec/rkvdec.c         |   2 +-
> >  drivers/thunderbolt/debugfs.c                 |  22 +--
> >  drivers/thunderbolt/domain.c                  |   4 +-
> >  drivers/thunderbolt/icm.c                     |  14 +-
> >  drivers/thunderbolt/nhi.c                     |   2 +-
> >  drivers/thunderbolt/retimer.c                 |   4 +-
> >  drivers/thunderbolt/switch.c                  |   6 +-
> >  drivers/thunderbolt/tb.c                      |  18 +-
> >  drivers/thunderbolt/usb4_port.c               |   4 +-
> >  drivers/tty/serial/8250/8250_omap.c           |  18 +-
> >  drivers/tty/serial/8250/8250_port.c           |   4 +-
> >  drivers/tty/serial/fsl_lpuart.c               |   2 +-
> >  drivers/tty/serial/serial_core.c              |   2 +-
> >  drivers/tty/serial/uartlite.c                 |   4 +-
> >  drivers/tty/serial/xilinx_uartps.c            |   2 +-
> >  drivers/usb/cdns3/cdns3-gadget.c              |   2 +-
> >  drivers/usb/cdns3/cdnsp-gadget.c              |   2 +-
> >  drivers/usb/chipidea/core.c                   |   2 +-
> >  drivers/usb/chipidea/otg_fsm.c                |   2 +-
> >  drivers/usb/dwc3/core.c                       |   2 +-
> >  drivers/usb/dwc3/dwc3-am62.c                  |   2 +-
> >  drivers/usb/dwc3/dwc3-imx8mp.c                |   2 +-
> >  drivers/usb/gadget/udc/cdns2/cdns2-gadget.c   |   2 +-
> >  drivers/usb/host/xhci-mtk.c                   |   2 +-
> >  drivers/usb/misc/apple-mfi-fastcharge.c       |   2 +-
> >  drivers/usb/mtu3/mtu3_plat.c                  |   2 +-
> >  drivers/usb/musb/musb_core.c                  |  10 +-
> >  drivers/usb/musb/musb_debugfs.c               |  10 +-
> >  drivers/usb/musb/musb_dsps.c                  |   2 +-
> >  drivers/usb/musb/musb_gadget.c                |   8 +-
> >  drivers/usb/musb/omap2430.c                   |   2 +-
> >  drivers/w1/masters/omap_hdq.c                 |  10 +-
> >  include/linux/greybus/bundle.h                |   2 +-
> >  sound/hda/hdac_device.c                       |   2 +-
> >  sound/pci/hda/cs35l41_hda.c                   |   8 +-
> >  sound/pci/hda/cs35l56_hda.c                   |   2 +-
> >  sound/pci/hda/hda_intel.c                     |   2 +-
> >  sound/pci/hda/tas2781_hda_i2c.c               |   6 +-
> >  sound/soc/atmel/mchp-spdifrx.c                |  12 +-
> >  sound/soc/codecs/arizona-jack.c               |  12 +-
> >  sound/soc/codecs/arizona.c                    |   2 +-
> >  sound/soc/codecs/cs35l41.c                    |   4 +-
> >  sound/soc/codecs/cs35l45.c                    |   2 +-
> >  sound/soc/codecs/cs35l56-sdw.c                |   4 +-
> >  sound/soc/codecs/cs35l56-shared.c             |   2 +-
> >  sound/soc/codecs/cs35l56.c                    |   2 +-
> >  sound/soc/codecs/cs42l42-sdw.c                |   2 +-
> >  sound/soc/codecs/cs42l42.c                    |   4 +-
> >  sound/soc/codecs/cs42l43-jack.c               |  10 +-
> >  sound/soc/codecs/cs42l43.c                    |   4 +-
> >  sound/soc/codecs/hda.c                        |   6 +-
> >  sound/soc/codecs/madera.c                     |   6 +-
> >  sound/soc/codecs/max98363.c                   |   2 +-
> >  sound/soc/codecs/max98373-sdw.c               |   2 +-
> >  sound/soc/codecs/rt1017-sdca-sdw.c            |   2 +-
> >  sound/soc/codecs/rt1308-sdw.c                 |   2 +-
> >  sound/soc/codecs/rt1316-sdw.c                 |   2 +-
> >  sound/soc/codecs/rt1318-sdw.c                 |   2 +-
> >  sound/soc/codecs/rt1320-sdw.c                 |   2 +-
> >  sound/soc/codecs/rt5682-sdw.c                 |   2 +-
> >  sound/soc/codecs/rt700.c                      |   4 +-
> >  sound/soc/codecs/rt711-sdca.c                 |   4 +-
> >  sound/soc/codecs/rt711.c                      |   4 +-
> >  sound/soc/codecs/rt712-sdca-dmic.c            |   2 +-
> >  sound/soc/codecs/rt712-sdca.c                 |   4 +-
> >  sound/soc/codecs/rt715-sdca.c                 |   2 +-
> >  sound/soc/codecs/rt715.c                      |   2 +-
> >  sound/soc/codecs/rt722-sdca.c                 |   4 +-
> >  sound/soc/codecs/wcd-mbhc-v2.c                |   4 +-
> >  sound/soc/codecs/wsa881x.c                    |   2 +-
> >  sound/soc/codecs/wsa884x.c                    |   2 +-
> >  sound/soc/intel/atom/sst/sst_pvt.c            |   2 +-
> >  sound/soc/intel/avs/core.c                    |   2 +-
> >  sound/soc/intel/avs/debugfs.c                 |   4 +-
> >  sound/soc/intel/avs/pcm.c                     |   2 +-
> >  sound/soc/intel/catpt/pcm.c                   |  12 +-
> >  sound/soc/intel/catpt/sysfs.c                 |   2 +-
> >  sound/soc/soc-component.c                     |   2 +-
> >  sound/soc/sof/control.c                       |   2 +-
> >  sound/soc/sof/debug.c                         |   2 +-
> >  sound/soc/sof/ipc3-dtrace.c                   |   2 +-
> >  sound/soc/sof/ipc4-loader.c                   |   2 +-
> >  sound/soc/sof/pcm.c                           |   2 +-
> >  sound/soc/sof/sof-client-ipc-flood-test.c     |   2 +-
> >  .../soc/sof/sof-client-ipc-kernel-injector.c  |   2 +-
> >  sound/soc/sof/sof-client-ipc-msg-injector.c   |   2 +-
> >  sound/soc/sof/sof-client-probes.c             |   6 +-
> >  sound/x86/intel_hdmi_audio.c                  |   6 +-
> >  373 files changed, 1076 insertions(+), 1076 deletions(-)

-- 
Regards,

Laurent Pinchart

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-07 18:49   ` Laurent Pinchart
@ 2024-10-07 22:08     ` Ulf Hansson
  2024-10-07 22:25       ` Laurent Pinchart
  2024-10-08 20:38     ` Uwe Kleine-König
  1 sibling, 1 reply; 19+ messages in thread
From: Ulf Hansson @ 2024-10-07 22:08 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: Sakari Ailus, dri-devel, linux-kernel, linux-bluetooth, linux-clk,
	linux-crypto, dmaengine, linux-gpio, amd-gfx, nouveau,
	linux-stm32, linux-arm-kernel, linux-i2c, linux-i3c, linux-iio,
	linux-input, patches, iommu, imx, linux-mediatek, linux-media,
	linux-mmc, linux-mtd, netdev, linux-wireless, linux-pci,
	linux-phy, linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
	rafael, Andy Shevchenko

On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Ulf,
>
> On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
> > >
> > > Hello everyone,
> > >
> > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > always used together, apart from bugs which are likely common. Going
> > > forward, most new users should be using pm_runtime_put_autosuspend().
> > >
> > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > and pm_runtime_mark_last_busy().
> >
> > That sounds like it could cause a lot of churns.
> >
> > Why not add a new helper function that does the
> > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > things? Then we can start moving users over to this new interface,
> > rather than having this intermediate step?
>
> I think the API would be nicer if we used the shortest and simplest
> function names for the most common use cases. Following
> pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> most common use case. That's why I like Sakari's approach of repurposing
> pm_runtime_put_autosuspend(), and introducing
> __pm_runtime_put_autosuspend() for the odd cases where
> pm_runtime_mark_last_busy() shouldn't be called.

Okay, so the reason for this approach is because we couldn't find a
short and descriptive name that could be used in favor of
pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
you like it - or not. :-)

I don't know what options you guys discussed, but to me the entire
"autosuspend"-suffix isn't really that necessary in my opinion. There
are more ways than calling pm_runtime_put_autosuspend() that triggers
us to use the RPM_AUTO flag for rpm_suspend(). For example, just
calling pm_runtime_put() has the similar effect.

Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
during rpm_resume() too, for example. So why bother about having
"mark_last_busy" in the new name too.

That said, my suggestion is simply "pm_runtime_put_suspend".

If you don't like it, I will certainly not object to your current
approach, even if I think it leads to unnecessary churns.

[...]

Kind regards
Uffe

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-07 22:08     ` Ulf Hansson
@ 2024-10-07 22:25       ` Laurent Pinchart
  2024-10-07 22:34         ` Ulf Hansson
  0 siblings, 1 reply; 19+ messages in thread
From: Laurent Pinchart @ 2024-10-07 22:25 UTC (permalink / raw)
  To: Ulf Hansson
  Cc: Sakari Ailus, dri-devel, linux-kernel, linux-bluetooth, linux-clk,
	linux-crypto, dmaengine, linux-gpio, amd-gfx, nouveau,
	linux-stm32, linux-arm-kernel, linux-i2c, linux-i3c, linux-iio,
	linux-input, patches, iommu, imx, linux-mediatek, linux-media,
	linux-mmc, linux-mtd, netdev, linux-wireless, linux-pci,
	linux-phy, linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
	rafael, Andy Shevchenko

Hi Ulf,

On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > >
> > > > Hello everyone,
> > > >
> > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > always used together, apart from bugs which are likely common. Going
> > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > >
> > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > and pm_runtime_mark_last_busy().
> > >
> > > That sounds like it could cause a lot of churns.
> > >
> > > Why not add a new helper function that does the
> > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > things? Then we can start moving users over to this new interface,
> > > rather than having this intermediate step?
> >
> > I think the API would be nicer if we used the shortest and simplest
> > function names for the most common use cases. Following
> > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > most common use case. That's why I like Sakari's approach of repurposing
> > pm_runtime_put_autosuspend(), and introducing
> > __pm_runtime_put_autosuspend() for the odd cases where
> > pm_runtime_mark_last_busy() shouldn't be called.
> 
> Okay, so the reason for this approach is because we couldn't find a
> short and descriptive name that could be used in favor of
> pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> you like it - or not. :-)

I like the idea at least :-)

> I don't know what options you guys discussed, but to me the entire
> "autosuspend"-suffix isn't really that necessary in my opinion. There
> are more ways than calling pm_runtime_put_autosuspend() that triggers
> us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> calling pm_runtime_put() has the similar effect.

To be honest, I'm lost there. pm_runtime_put() calls
__pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
RPM_ASYNC | RPM_AUTO).

> 
> Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> during rpm_resume() too, for example. So why bother about having
> "mark_last_busy" in the new name too.
> 
> That said, my suggestion is simply "pm_runtime_put_suspend".

Can we do even better, and make pm_runtime_put() to handle autosuspend
automatically when autosuspend is enabled ?

> If you don't like it, I will certainly not object to your current
> approach, even if I think it leads to unnecessary churns.
> 
> [...]
> 
> Kind regards
> Uffe

-- 
Regards,

Laurent Pinchart

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-07 22:25       ` Laurent Pinchart
@ 2024-10-07 22:34         ` Ulf Hansson
  2024-10-08 18:24           ` Rafael J. Wysocki
  0 siblings, 1 reply; 19+ messages in thread
From: Ulf Hansson @ 2024-10-07 22:34 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: Sakari Ailus, dri-devel, linux-kernel, linux-bluetooth, linux-clk,
	linux-crypto, dmaengine, linux-gpio, amd-gfx, nouveau,
	linux-stm32, linux-arm-kernel, linux-i2c, linux-i3c, linux-iio,
	linux-input, patches, iommu, imx, linux-mediatek, linux-media,
	linux-mmc, linux-mtd, netdev, linux-wireless, linux-pci,
	linux-phy, linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
	rafael, Andy Shevchenko

On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Ulf,
>
> On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> > On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > > >
> > > > > Hello everyone,
> > > > >
> > > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > > always used together, apart from bugs which are likely common. Going
> > > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > > >
> > > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > > and pm_runtime_mark_last_busy().
> > > >
> > > > That sounds like it could cause a lot of churns.
> > > >
> > > > Why not add a new helper function that does the
> > > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > > things? Then we can start moving users over to this new interface,
> > > > rather than having this intermediate step?
> > >
> > > I think the API would be nicer if we used the shortest and simplest
> > > function names for the most common use cases. Following
> > > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > > most common use case. That's why I like Sakari's approach of repurposing
> > > pm_runtime_put_autosuspend(), and introducing
> > > __pm_runtime_put_autosuspend() for the odd cases where
> > > pm_runtime_mark_last_busy() shouldn't be called.
> >
> > Okay, so the reason for this approach is because we couldn't find a
> > short and descriptive name that could be used in favor of
> > pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> > you like it - or not. :-)
>
> I like the idea at least :-)
>
> > I don't know what options you guys discussed, but to me the entire
> > "autosuspend"-suffix isn't really that necessary in my opinion. There
> > are more ways than calling pm_runtime_put_autosuspend() that triggers
> > us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> > calling pm_runtime_put() has the similar effect.
>
> To be honest, I'm lost there. pm_runtime_put() calls
> __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> RPM_ASYNC | RPM_AUTO).

__pm_runtime_idle() ends up calling rpm_idle(), which may call
rpm_suspend() - if it succeeds to idle the device. In that case, it
tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
to what is happening when calling pm_runtime_put_autosuspend().

>
> >
> > Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> > during rpm_resume() too, for example. So why bother about having
> > "mark_last_busy" in the new name too.
> >
> > That said, my suggestion is simply "pm_runtime_put_suspend".
>
> Can we do even better, and make pm_runtime_put() to handle autosuspend
> automatically when autosuspend is enabled ?

As stated above, this is already the case.

>
> > If you don't like it, I will certainly not object to your current
> > approach, even if I think it leads to unnecessary churns.
> >
> > [...]
> >
> > Kind regards
> > Uffe
>
> --
> Regards,
>
> Laurent Pinchart

Kind regards
Uffe

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-07 22:34         ` Ulf Hansson
@ 2024-10-08 18:24           ` Rafael J. Wysocki
  2024-10-09 10:20             ` Rafael J. Wysocki
                               ` (2 more replies)
  0 siblings, 3 replies; 19+ messages in thread
From: Rafael J. Wysocki @ 2024-10-08 18:24 UTC (permalink / raw)
  To: Ulf Hansson, Laurent Pinchart, Sakari Ailus
  Cc: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
	dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
	linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
	patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
	linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
	linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
	Andy Shevchenko

On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
> <laurent.pinchart@ideasonboard.com> wrote:
> >
> > Hi Ulf,
> >
> > On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> > > On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > > > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > > > >
> > > > > > Hello everyone,
> > > > > >
> > > > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > > > always used together, apart from bugs which are likely common. Going
> > > > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > > > >
> > > > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > > > and pm_runtime_mark_last_busy().
> > > > >
> > > > > That sounds like it could cause a lot of churns.
> > > > >
> > > > > Why not add a new helper function that does the
> > > > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > > > things? Then we can start moving users over to this new interface,
> > > > > rather than having this intermediate step?
> > > >
> > > > I think the API would be nicer if we used the shortest and simplest
> > > > function names for the most common use cases. Following
> > > > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > > > most common use case. That's why I like Sakari's approach of repurposing
> > > > pm_runtime_put_autosuspend(), and introducing
> > > > __pm_runtime_put_autosuspend() for the odd cases where
> > > > pm_runtime_mark_last_busy() shouldn't be called.
> > >
> > > Okay, so the reason for this approach is because we couldn't find a
> > > short and descriptive name that could be used in favor of
> > > pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> > > you like it - or not. :-)
> >
> > I like the idea at least :-)
> >
> > > I don't know what options you guys discussed, but to me the entire
> > > "autosuspend"-suffix isn't really that necessary in my opinion. There
> > > are more ways than calling pm_runtime_put_autosuspend() that triggers
> > > us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> > > calling pm_runtime_put() has the similar effect.
> >
> > To be honest, I'm lost there. pm_runtime_put() calls
> > __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> > pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> > RPM_ASYNC | RPM_AUTO).
>
> __pm_runtime_idle() ends up calling rpm_idle(), which may call
> rpm_suspend() - if it succeeds to idle the device. In that case, it
> tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
> to what is happening when calling pm_runtime_put_autosuspend().

Right.

For almost everybody, except for a small bunch of drivers that
actually have a .runtime_idle() callback, pm_runtime_put() is
literally equivalent to pm_runtime_put_autosuspend().

So really the question is why anyone who doesn't provide a
.runtime_idle() callback bothers with using this special
pm_runtime_put_autosuspend() thing, which really means "do a
runtime_put(), but skip my .runtime_idle() callback".

> >
> > >
> > > Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> > > during rpm_resume() too, for example. So why bother about having
> > > "mark_last_busy" in the new name too.
> > >
> > > That said, my suggestion is simply "pm_runtime_put_suspend".
> >
> > Can we do even better, and make pm_runtime_put() to handle autosuspend
> > automatically when autosuspend is enabled ?
>
> As stated above, this is already the case.

What really is needed appears to be a combination of
pm_runtime_mark_last_busy() with pm_runtime_put().

Granted, pm_runtime_put() could do the pm_runtime_mark_last_busy()
thing automatically if autosuspend is enabled and the only consequence
of it might be delaying a suspend of the device until its autosuspend
timer expires, which should not be a problem in the vast majority of
cases.

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-08 18:24           ` Rafael J. Wysocki
@ 2024-10-09 10:20             ` Rafael J. Wysocki
  2024-10-09 10:27             ` Ulf Hansson
  2024-10-09 12:48             ` Richard Fitzgerald
  2 siblings, 0 replies; 19+ messages in thread
From: Rafael J. Wysocki @ 2024-10-09 10:20 UTC (permalink / raw)
  To: Ulf Hansson, Laurent Pinchart, Sakari Ailus
  Cc: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
	dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
	linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
	patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
	linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
	linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
	Andy Shevchenko

On Tue, Oct 8, 2024 at 8:24 PM Rafael J. Wysocki <rafael@kernel.org> wrote:
>
> On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
> > <laurent.pinchart@ideasonboard.com> wrote:
> > >
> > > Hi Ulf,
> > >
> > > On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> > > > On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > > > > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > > > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > > > > >
> > > > > > > Hello everyone,
> > > > > > >
> > > > > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > > > > always used together, apart from bugs which are likely common. Going
> > > > > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > > > > >
> > > > > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > > > > and pm_runtime_mark_last_busy().
> > > > > >
> > > > > > That sounds like it could cause a lot of churns.
> > > > > >
> > > > > > Why not add a new helper function that does the
> > > > > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > > > > things? Then we can start moving users over to this new interface,
> > > > > > rather than having this intermediate step?
> > > > >
> > > > > I think the API would be nicer if we used the shortest and simplest
> > > > > function names for the most common use cases. Following
> > > > > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > > > > most common use case. That's why I like Sakari's approach of repurposing
> > > > > pm_runtime_put_autosuspend(), and introducing
> > > > > __pm_runtime_put_autosuspend() for the odd cases where
> > > > > pm_runtime_mark_last_busy() shouldn't be called.
> > > >
> > > > Okay, so the reason for this approach is because we couldn't find a
> > > > short and descriptive name that could be used in favor of
> > > > pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> > > > you like it - or not. :-)
> > >
> > > I like the idea at least :-)
> > >
> > > > I don't know what options you guys discussed, but to me the entire
> > > > "autosuspend"-suffix isn't really that necessary in my opinion. There
> > > > are more ways than calling pm_runtime_put_autosuspend() that triggers
> > > > us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> > > > calling pm_runtime_put() has the similar effect.
> > >
> > > To be honest, I'm lost there. pm_runtime_put() calls
> > > __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> > > pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> > > RPM_ASYNC | RPM_AUTO).
> >
> > __pm_runtime_idle() ends up calling rpm_idle(), which may call
> > rpm_suspend() - if it succeeds to idle the device. In that case, it
> > tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
> > to what is happening when calling pm_runtime_put_autosuspend().
>
> Right.
>
> For almost everybody, except for a small bunch of drivers that
> actually have a .runtime_idle() callback, pm_runtime_put() is
> literally equivalent to pm_runtime_put_autosuspend().
>
> So really the question is why anyone who doesn't provide a
> .runtime_idle() callback bothers with using this special
> pm_runtime_put_autosuspend() thing, which really means "do a
> runtime_put(), but skip my .runtime_idle() callback".
>
> > >
> > > >
> > > > Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> > > > during rpm_resume() too, for example. So why bother about having
> > > > "mark_last_busy" in the new name too.
> > > >
> > > > That said, my suggestion is simply "pm_runtime_put_suspend".
> > >
> > > Can we do even better, and make pm_runtime_put() to handle autosuspend
> > > automatically when autosuspend is enabled ?
> >
> > As stated above, this is already the case.
>
> What really is needed appears to be a combination of
> pm_runtime_mark_last_busy() with pm_runtime_put().
>
> Granted, pm_runtime_put() could do the pm_runtime_mark_last_busy()
> thing automatically if autosuspend is enabled and the only consequence
> of it might be delaying a suspend of the device until its autosuspend
> timer expires, which should not be a problem in the vast majority of
> cases.

That said, it is likely better to avoid surprising the current users
of pm_runtime_put() and define something like

static inline void pm_runtime_touch_and_put(struct device *dev)
{
        pm_runtime_mark_last_busy(dev);
        pm_runtime_put(dev);
}

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-08 18:24           ` Rafael J. Wysocki
  2024-10-09 10:20             ` Rafael J. Wysocki
@ 2024-10-09 10:27             ` Ulf Hansson
  2024-10-09 12:48             ` Richard Fitzgerald
  2 siblings, 0 replies; 19+ messages in thread
From: Ulf Hansson @ 2024-10-09 10:27 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Laurent Pinchart, Sakari Ailus, dri-devel, linux-kernel,
	linux-bluetooth, linux-clk, linux-crypto, dmaengine, linux-gpio,
	amd-gfx, nouveau, linux-stm32, linux-arm-kernel, linux-i2c,
	linux-i3c, linux-iio, linux-input, patches, iommu, imx,
	linux-mediatek, linux-media, linux-mmc, linux-mtd, netdev,
	linux-wireless, linux-pci, linux-phy, linux-pwm, linux-remoteproc,
	linux-sound, linux-spi, linux-staging, linux-usb, linux-serial,
	greybus-dev, asahi, Andy Shevchenko

On Tue, 8 Oct 2024 at 20:25, Rafael J. Wysocki <rafael@kernel.org> wrote:
>
> On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
> > <laurent.pinchart@ideasonboard.com> wrote:
> > >
> > > Hi Ulf,
> > >
> > > On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> > > > On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> > > > > On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > > > > > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> > > > > > >
> > > > > > > Hello everyone,
> > > > > > >
> > > > > > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > > > > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > > > > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > > > > > always used together, apart from bugs which are likely common. Going
> > > > > > > forward, most new users should be using pm_runtime_put_autosuspend().
> > > > > > >
> > > > > > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > > > > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > > > > > and pm_runtime_mark_last_busy().
> > > > > >
> > > > > > That sounds like it could cause a lot of churns.
> > > > > >
> > > > > > Why not add a new helper function that does the
> > > > > > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > > > > > things? Then we can start moving users over to this new interface,
> > > > > > rather than having this intermediate step?
> > > > >
> > > > > I think the API would be nicer if we used the shortest and simplest
> > > > > function names for the most common use cases. Following
> > > > > pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> > > > > most common use case. That's why I like Sakari's approach of repurposing
> > > > > pm_runtime_put_autosuspend(), and introducing
> > > > > __pm_runtime_put_autosuspend() for the odd cases where
> > > > > pm_runtime_mark_last_busy() shouldn't be called.
> > > >
> > > > Okay, so the reason for this approach is because we couldn't find a
> > > > short and descriptive name that could be used in favor of
> > > > pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> > > > you like it - or not. :-)
> > >
> > > I like the idea at least :-)
> > >
> > > > I don't know what options you guys discussed, but to me the entire
> > > > "autosuspend"-suffix isn't really that necessary in my opinion. There
> > > > are more ways than calling pm_runtime_put_autosuspend() that triggers
> > > > us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> > > > calling pm_runtime_put() has the similar effect.
> > >
> > > To be honest, I'm lost there. pm_runtime_put() calls
> > > __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> > > pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> > > RPM_ASYNC | RPM_AUTO).
> >
> > __pm_runtime_idle() ends up calling rpm_idle(), which may call
> > rpm_suspend() - if it succeeds to idle the device. In that case, it
> > tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
> > to what is happening when calling pm_runtime_put_autosuspend().
>
> Right.
>
> For almost everybody, except for a small bunch of drivers that
> actually have a .runtime_idle() callback, pm_runtime_put() is
> literally equivalent to pm_runtime_put_autosuspend().
>
> So really the question is why anyone who doesn't provide a
> .runtime_idle() callback bothers with using this special
> pm_runtime_put_autosuspend() thing, which really means "do a
> runtime_put(), but skip my .runtime_idle() callback".

My guess is that it's in most cases a legacy pattern that is being
followed. Also note that rpm_idle() didn't "always" tag on the
RPM_AUTO flag, even if it's quite a while ago (2013) since we added
it.

Unless there is some actual optimization involved, as it also allows
us to skip calling rpm_idle() and go directly for rpm_suspend().

>
> > >
> > > >
> > > > Moreover, it's similar for pm_runtime_mark_last_busy(), it's called
> > > > during rpm_resume() too, for example. So why bother about having
> > > > "mark_last_busy" in the new name too.
> > > >
> > > > That said, my suggestion is simply "pm_runtime_put_suspend".
> > >
> > > Can we do even better, and make pm_runtime_put() to handle autosuspend
> > > automatically when autosuspend is enabled ?
> >
> > As stated above, this is already the case.
>
> What really is needed appears to be a combination of
> pm_runtime_mark_last_busy() with pm_runtime_put().

This makes sense to me too, but I don't think we should limit it to this.

Making pm_runtime_put_autosuspend (or if the name
"pm_runtime_put_suspend" is better?) to do the similar thing, is
probably a good idea too. At least in my opinion.

>
> Granted, pm_runtime_put() could do the pm_runtime_mark_last_busy()
> thing automatically if autosuspend is enabled and the only consequence
> of it might be delaying a suspend of the device until its autosuspend
> timer expires, which should not be a problem in the vast majority of
> cases.

Right.

I guess we should expect the *sync* variants to be used, if the timer
really needs to be overridden.

Kind regards
Uffe

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-08 18:24           ` Rafael J. Wysocki
  2024-10-09 10:20             ` Rafael J. Wysocki
  2024-10-09 10:27             ` Ulf Hansson
@ 2024-10-09 12:48             ` Richard Fitzgerald
  2024-10-09 13:34               ` Rafael J. Wysocki
  2 siblings, 1 reply; 19+ messages in thread
From: Richard Fitzgerald @ 2024-10-09 12:48 UTC (permalink / raw)
  To: Rafael J. Wysocki, Ulf Hansson, Laurent Pinchart, Sakari Ailus
  Cc: dri-devel, linux-kernel, linux-bluetooth, linux-clk, linux-crypto,
	dmaengine, linux-gpio, amd-gfx, nouveau, linux-stm32,
	linux-arm-kernel, linux-i2c, linux-i3c, linux-iio, linux-input,
	patches, iommu, imx, linux-mediatek, linux-media, linux-mmc,
	linux-mtd, netdev, linux-wireless, linux-pci, linux-phy,
	linux-pwm, linux-remoteproc, linux-sound, linux-spi,
	linux-staging, linux-usb, linux-serial, greybus-dev, asahi,
	Andy Shevchenko

On 08/10/2024 7:24 pm, Rafael J. Wysocki wrote:
> On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>>
>> On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
>> <laurent.pinchart@ideasonboard.com> wrote:
>>>
>>> Hi Ulf,
>>>
>>> On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
>>>> On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
>>>>> On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
>>>>>> On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
>>>>>>>
>>>>>>> Hello everyone,
>>>>>>>
>>>>>>> This set will switch the users of pm_runtime_put_autosuspend() to
>>>>>>> __pm_runtime_put_autosuspend() while the former will soon be re-purposed
>>>>>>> to include a call to pm_runtime_mark_last_busy(). The two are almost
>>>>>>> always used together, apart from bugs which are likely common. Going
>>>>>>> forward, most new users should be using pm_runtime_put_autosuspend().
>>>>>>>
>>>>>>> Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
>>>>>>> I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
>>>>>>> and pm_runtime_mark_last_busy().
>>>>>>
>>>>>> That sounds like it could cause a lot of churns.
>>>>>>
>>>>>> Why not add a new helper function that does the
>>>>>> pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
>>>>>> things? Then we can start moving users over to this new interface,
>>>>>> rather than having this intermediate step?
>>>>>
>>>>> I think the API would be nicer if we used the shortest and simplest
>>>>> function names for the most common use cases. Following
>>>>> pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
>>>>> most common use case. That's why I like Sakari's approach of repurposing
>>>>> pm_runtime_put_autosuspend(), and introducing
>>>>> __pm_runtime_put_autosuspend() for the odd cases where
>>>>> pm_runtime_mark_last_busy() shouldn't be called.
>>>>
>>>> Okay, so the reason for this approach is because we couldn't find a
>>>> short and descriptive name that could be used in favor of
>>>> pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
>>>> you like it - or not. :-)
>>>
>>> I like the idea at least :-)
>>>
>>>> I don't know what options you guys discussed, but to me the entire
>>>> "autosuspend"-suffix isn't really that necessary in my opinion. There
>>>> are more ways than calling pm_runtime_put_autosuspend() that triggers
>>>> us to use the RPM_AUTO flag for rpm_suspend(). For example, just
>>>> calling pm_runtime_put() has the similar effect.
>>>
>>> To be honest, I'm lost there. pm_runtime_put() calls
>>> __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
>>> pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
>>> RPM_ASYNC | RPM_AUTO).
>>
>> __pm_runtime_idle() ends up calling rpm_idle(), which may call
>> rpm_suspend() - if it succeeds to idle the device. In that case, it
>> tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
>> to what is happening when calling pm_runtime_put_autosuspend().
> 
> Right.
> 
> For almost everybody, except for a small bunch of drivers that
> actually have a .runtime_idle() callback, pm_runtime_put() is
> literally equivalent to pm_runtime_put_autosuspend().
> 
> So really the question is why anyone who doesn't provide a
> .runtime_idle() callback bothers with using this special
> pm_runtime_put_autosuspend() thing,

Because they are following the documentation? It says:

"Drivers should call pm_runtime_mark_last_busy() to update this field
after carrying out I/O, typically just before calling
pm_runtime_put_autosuspend()."

and

"In order to use autosuspend, subsystems or drivers must call
pm_runtime_use_autosuspend() (...), and thereafter they should use the
various `*_autosuspend()` helper functions instead of the non#
autosuspend counterparts"

So the documentation says I should be using pm_runtime_put_autosuspend()
instead of pm_runtime_put().

Seems unfair to criticise people for following the documentation.


^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-09 12:48             ` Richard Fitzgerald
@ 2024-10-09 13:34               ` Rafael J. Wysocki
  0 siblings, 0 replies; 19+ messages in thread
From: Rafael J. Wysocki @ 2024-10-09 13:34 UTC (permalink / raw)
  To: Richard Fitzgerald, Sakari Ailus
  Cc: Ulf Hansson, Laurent Pinchart, dri-devel, linux-kernel,
	linux-bluetooth, linux-clk, linux-crypto, dmaengine, linux-gpio,
	amd-gfx, nouveau, linux-stm32, linux-arm-kernel, linux-i2c,
	linux-i3c, linux-iio, linux-input, patches, iommu, imx,
	linux-mediatek, linux-media, linux-mmc, linux-mtd, netdev,
	linux-wireless, linux-pci, linux-phy, linux-pwm, linux-remoteproc,
	linux-sound, linux-spi, linux-staging, linux-usb, linux-serial,
	greybus-dev, asahi, Andy Shevchenko, Uwe Kleine-König

On Wed, Oct 9, 2024 at 2:48 PM Richard Fitzgerald
<rf@opensource.cirrus.com> wrote:
>
> On 08/10/2024 7:24 pm, Rafael J. Wysocki wrote:
> > On Tue, Oct 8, 2024 at 12:35 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >>
> >> On Tue, 8 Oct 2024 at 00:25, Laurent Pinchart
> >> <laurent.pinchart@ideasonboard.com> wrote:
> >>>
> >>> Hi Ulf,
> >>>
> >>> On Tue, Oct 08, 2024 at 12:08:24AM +0200, Ulf Hansson wrote:
> >>>> On Mon, 7 Oct 2024 at 20:49, Laurent Pinchart wrote:
> >>>>> On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> >>>>>> On Fri, 4 Oct 2024 at 11:41, Sakari Ailus wrote:
> >>>>>>>
> >>>>>>> Hello everyone,
> >>>>>>>
> >>>>>>> This set will switch the users of pm_runtime_put_autosuspend() to
> >>>>>>> __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> >>>>>>> to include a call to pm_runtime_mark_last_busy(). The two are almost
> >>>>>>> always used together, apart from bugs which are likely common. Going
> >>>>>>> forward, most new users should be using pm_runtime_put_autosuspend().
> >>>>>>>
> >>>>>>> Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> >>>>>>> I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> >>>>>>> and pm_runtime_mark_last_busy().
> >>>>>>
> >>>>>> That sounds like it could cause a lot of churns.
> >>>>>>
> >>>>>> Why not add a new helper function that does the
> >>>>>> pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> >>>>>> things? Then we can start moving users over to this new interface,
> >>>>>> rather than having this intermediate step?
> >>>>>
> >>>>> I think the API would be nicer if we used the shortest and simplest
> >>>>> function names for the most common use cases. Following
> >>>>> pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> >>>>> most common use case. That's why I like Sakari's approach of repurposing
> >>>>> pm_runtime_put_autosuspend(), and introducing
> >>>>> __pm_runtime_put_autosuspend() for the odd cases where
> >>>>> pm_runtime_mark_last_busy() shouldn't be called.
> >>>>
> >>>> Okay, so the reason for this approach is because we couldn't find a
> >>>> short and descriptive name that could be used in favor of
> >>>> pm_runtime_put_autosuspend(). Let me throw some ideas at it and maybe
> >>>> you like it - or not. :-)
> >>>
> >>> I like the idea at least :-)
> >>>
> >>>> I don't know what options you guys discussed, but to me the entire
> >>>> "autosuspend"-suffix isn't really that necessary in my opinion. There
> >>>> are more ways than calling pm_runtime_put_autosuspend() that triggers
> >>>> us to use the RPM_AUTO flag for rpm_suspend(). For example, just
> >>>> calling pm_runtime_put() has the similar effect.
> >>>
> >>> To be honest, I'm lost there. pm_runtime_put() calls
> >>> __pm_runtime_idle(RPM_GET_PUT | RPM_ASYNC), while
> >>> pm_runtime_put_autosuspend() calls __pm_runtime_suspend(RPM_GET_PUT |
> >>> RPM_ASYNC | RPM_AUTO).
> >>
> >> __pm_runtime_idle() ends up calling rpm_idle(), which may call
> >> rpm_suspend() - if it succeeds to idle the device. In that case, it
> >> tags on the RPM_AUTO flag in the call to rpm_suspend(). Quite similar
> >> to what is happening when calling pm_runtime_put_autosuspend().
> >
> > Right.
> >
> > For almost everybody, except for a small bunch of drivers that
> > actually have a .runtime_idle() callback, pm_runtime_put() is
> > literally equivalent to pm_runtime_put_autosuspend().
> >
> > So really the question is why anyone who doesn't provide a
> > .runtime_idle() callback bothers with using this special
> > pm_runtime_put_autosuspend() thing,
>
> Because they are following the documentation? It says:
>
> "Drivers should call pm_runtime_mark_last_busy() to update this field
> after carrying out I/O, typically just before calling
> pm_runtime_put_autosuspend()."
>
> and
>
> "In order to use autosuspend, subsystems or drivers must call
> pm_runtime_use_autosuspend() (...), and thereafter they should use the
> various `*_autosuspend()` helper functions instead of the non#
> autosuspend counterparts"
>
> So the documentation says I should be using pm_runtime_put_autosuspend()
> instead of pm_runtime_put().
>
> Seems unfair to criticise people for following the documentation.

I'm not criticising anyone, just wondering why they do what they do.

"Because it is documented this way" is a fair answer, but it doesn't
invalidate the observation that the difference between
pm_runtime_put_autosuspend() and pm_runtime_put() boils down to the
cases when the .runtime_idle() callback is present (which are few and
far between so to speak).  Moreover, there are call sites using
pm_runtime_*() functions even though they may not know whether or not
autosuspend is enabled for the target devices, so the advice given in
the documentation cannot be universally followed regardless.

This thread is about the way to go, generally speaking, and what I'm
saying is effectively that replacing pm_runtime_put_autosuspend() with
pm_runtime_put() almost everywhere (if not just everywhere) would be
fine with me.

I also think that the current users of pm_runtime_put_autosuspend()
that is not immediately preceded by pm_runtime_mark_last_busy() can be
readily switched over to using pm_runtime_put() instead of it and then
pm_runtime_put_autosuspend() can be made call
pm_runtime_mark_last_busy(), so the latter can be removed from the
code using the former.  Note that this last step does not require
tree-wide changes, because calling pm_runtime_mark_last_busy() twice
in a row for the same device is not a problem.

Of course, the documentation needs to be updated in accordance with
the code changes, which didn't happen when previous changes were made
to pm_runtime_put() and that likely is why it does not reflect the
current code.

^ permalink raw reply	[flat|nested] 19+ messages in thread

* Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  2024-10-07 18:49   ` Laurent Pinchart
  2024-10-07 22:08     ` Ulf Hansson
@ 2024-10-08 20:38     ` Uwe Kleine-König
  1 sibling, 0 replies; 19+ messages in thread
From: Uwe Kleine-König @ 2024-10-08 20:38 UTC (permalink / raw)
  To: Laurent Pinchart
  Cc: Ulf Hansson, Sakari Ailus, dri-devel, linux-kernel,
	linux-bluetooth, linux-clk, linux-crypto, dmaengine, linux-gpio,
	amd-gfx, nouveau, linux-stm32, linux-arm-kernel, linux-i2c,
	linux-i3c, linux-iio, linux-input, patches, iommu, imx,
	linux-mediatek, linux-media, linux-mmc, linux-mtd, netdev,
	linux-wireless, linux-pci, linux-phy, linux-pwm, linux-remoteproc,
	linux-sound, linux-spi, linux-staging, linux-usb, linux-serial,
	greybus-dev, asahi, rafael, Andy Shevchenko

[-- Attachment #1: Type: text/plain, Size: 2371 bytes --]

Hello,

On Mon, Oct 07, 2024 at 09:49:24PM +0300, Laurent Pinchart wrote:
> On Fri, Oct 04, 2024 at 04:38:36PM +0200, Ulf Hansson wrote:
> > On Fri, 4 Oct 2024 at 11:41, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
> > >
> > > Hello everyone,
> > >
> > > This set will switch the users of pm_runtime_put_autosuspend() to
> > > __pm_runtime_put_autosuspend() while the former will soon be re-purposed
> > > to include a call to pm_runtime_mark_last_busy(). The two are almost
> > > always used together, apart from bugs which are likely common. Going
> > > forward, most new users should be using pm_runtime_put_autosuspend().
> > >
> > > Once this conversion is done and pm_runtime_put_autosuspend() re-purposed,
> > > I'll post another set to merge the calls to __pm_runtime_put_autosuspend()
> > > and pm_runtime_mark_last_busy().
> > 
> > That sounds like it could cause a lot of churns.
> > 
> > Why not add a new helper function that does the
> > pm_runtime_put_autosuspend() and the pm_runtime_mark_last_busy()
> > things? Then we can start moving users over to this new interface,
> > rather than having this intermediate step?
> 
> I think the API would be nicer if we used the shortest and simplest
> function names for the most common use cases. Following
> pm_runtime_put_autosuspend() with pm_runtime_mark_last_busy() is that
> most common use case. That's why I like Sakari's approach of repurposing
> pm_runtime_put_autosuspend(), and introducing
> __pm_runtime_put_autosuspend() for the odd cases where
> pm_runtime_mark_last_busy() shouldn't be called.

That's ok for me. However this patch series isn't the optimal path to
there because most drivers (i.e. those that already today do
pm_runtime_mark_last_busy() in combination with
pm_runtime_put_autosuspend()) have to be patched twice.

The saner route is: Only convert the drivers with a sole
pm_runtime_put_autosuspend() (i.e. without pm_runtime_mark_last_busy())
to __pm_runtime_put_autosuspend(). Then add the mark_last_busy() bits to
pm_runtime_put_autosuspend() and then drop the explicit calls to
pm_runtime_mark_last_busy() before pm_runtime_put_autosuspend().

(Note this doesn't take into account Rafael's position that
pm_runtime_put() might be the saner option. My argument applies for that
conversion analogously.)

Best regards
Uwe

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 19+ messages in thread

end of thread, other threads:[~2024-10-09 13:34 UTC | newest]

Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-10-04  9:41 [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend() Sakari Ailus
2024-10-04  9:41 ` [PATCH 20/51] Input: omap4-keypad: " Sakari Ailus
2024-10-04  9:55   ` Andreas Kemnade
2024-10-04 10:26     ` Sakari Ailus
2024-10-04 10:54       ` Andreas Kemnade
2024-10-04 11:08       ` Dmitry Torokhov
2024-10-04  9:41 ` [PATCH 21/51] Input: cs40l50: " Sakari Ailus
2024-10-04 11:09   ` Dmitry Torokhov
2024-10-04 14:38 ` [PATCH 00/51] treewide: " Ulf Hansson
2024-10-07 18:49   ` Laurent Pinchart
2024-10-07 22:08     ` Ulf Hansson
2024-10-07 22:25       ` Laurent Pinchart
2024-10-07 22:34         ` Ulf Hansson
2024-10-08 18:24           ` Rafael J. Wysocki
2024-10-09 10:20             ` Rafael J. Wysocki
2024-10-09 10:27             ` Ulf Hansson
2024-10-09 12:48             ` Richard Fitzgerald
2024-10-09 13:34               ` Rafael J. Wysocki
2024-10-08 20:38     ` Uwe Kleine-König

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).