Re: [PATCH 06/10] HID: move logitech report quirks

[Jiri Kosina <jkosina@suse.cz>]

On Fri, 16 May 2008, Jiri Slaby wrote:

>  static const struct hid_device_id hid_blacklist[] = {
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) },
>  	{ }
>  };

This shouldn't be needed as soon as the userspace supports the proper 
module autoloading, right?

> +#define LOGITECH_RDESC	0x1
> +
> +/*
> + * Certain Logitech keyboards send in report #3 keys which are far
> + * above the logical maximum described in descriptor. This extends
> + * the original value of 0x28c of logical maximum to 0x104d
> + */
> +static void lg_report_fixup(struct hid_device *hdev, __u8 *rdesc,
> +		unsigned int rsize)
> +{
> +	if (rsize >= 90 && rdesc[83] == 0x26
> +			&& rdesc[84] == 0x8c
> +			&& rdesc[85] == 0x02) {
> +		dev_info(&hdev->dev, "fixing up Logitech keyboard report "
> +				"descriptor\n");
> +		rdesc[84] = rdesc[89] = 0x4d;
> +		rdesc[85] = rdesc[90] = 0x10;
> +	}
> +}
> +
> +static const struct hid_device_id lg_devices[] = {
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
> +		.driver_data = LOGITECH_RDESC },
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER),
> +		.driver_data = LOGITECH_RDESC },
> +	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2),
> +		.driver_data = LOGITECH_RDESC },
> +	{ }

You set the LOGITECH_RDESC flag here, but it is then never used anywhere. 
I guess that your original intent was to check for this flag in 
lg_report_fixup(), right?

Thanks,

-- 
Jiri Kosina
SUSE Labs