From: "Jonathan Neuschäfer" <j.ne@posteo.net>
To: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Cc: linux-input@vger.kernel.org, "Ash Logan" <ash@heyquark.com>,
"Jonathan Neuschäfer" <j.ne@posteo.net>,
"Jiri Kosina" <jikos@kernel.org>,
"Benjamin Tissoires" <benjamin.tissoires@redhat.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] HID: wiiu-drc: Implement touch reports
Date: Wed, 5 May 2021 22:43:55 +0000 [thread overview]
Message-ID: <YJMfq9MbY2guEhpv@latitude> (raw)
In-Reply-To: <20210502232836.26134-3-linkmauve@linkmauve.fr>
[-- Attachment #1: Type: text/plain, Size: 2020 bytes --]
Hi,
some more comments below. Enjoy :)
On Mon, May 03, 2021 at 01:28:33AM +0200, Emmanuel Gil Peyrot wrote:
> There is a 100×200 inaccessible border on each side, and the Y axis is
> inverted, these are the two main quirks of this touch panel.
Does that mean 100 px borders left and right, and 200 px borders top and
bottom?
100×200 evokes the image of a rectangle of that size, which I found
confusing for a moment.
>
> I’ve been testing with weston-simple-touch mostly, but it also with the
> rest of Weston.
>
> Signed-off-by: Ash Logan <ash@heyquark.com>
> Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
> ---
> drivers/hid/hid-wiiu-drc.c | 83 +++++++++++++++++++++++++++++++++++---
> 1 file changed, 78 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/hid/hid-wiiu-drc.c b/drivers/hid/hid-wiiu-drc.c
> index 018cbdb53a2c..77e70827c37d 100644
> --- a/drivers/hid/hid-wiiu-drc.c
> +++ b/drivers/hid/hid-wiiu-drc.c
> @@ -49,13 +49,27 @@
>
> #define BUTTON_POWER BIT(25)
>
> +/* Touch constants */
> +/* Resolution in pixels */
> +#define RES_X 854
> +#define RES_Y 480
> +/* Display/touch size in mm */
> +#define WIDTH 138
> +#define HEIGHT 79
> +#define NUM_TOUCH_POINTS 10
> +#define MAX_TOUCH_RES (1 << 12)
> +#define TOUCH_BORDER_X 100
> +#define TOUCH_BORDER_Y 200
[...]
> + /* touch */
> + /* Average touch points for improved accuracy. */
> + x = y = 0;
> + for (i = 0; i < NUM_TOUCH_POINTS; i++) {
> + base = 36 + 4 * i;
> +
> + x += ((data[base + 1] & 0xF) << 8) | data[base];
> + y += ((data[base + 3] & 0xF) << 8) | data[base + 2];
> + }
> + x /= NUM_TOUCH_POINTS;
> + y /= NUM_TOUCH_POINTS;
Given that there are 10 possible touch points: Does the gamepad actually
support multitouch (usefully)?
If so, I think it would be better to report all touch points
individually to userspace, to allow for multitouch gestures;
userspace can still implement averaging if desired.
Thanks,
Jonathan
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2021-05-05 22:44 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-02 23:28 [PATCH 0/4] RFC: HID: wiiu-drc: Add a driver for the Wii U gamepad Emmanuel Gil Peyrot
2021-05-02 23:28 ` [PATCH 1/4] HID: wiiu-drc: Add a driver for this gamepad Emmanuel Gil Peyrot
2021-05-05 22:33 ` Jonathan Neuschäfer
2021-05-06 10:07 ` Emmanuel Gil Peyrot
2021-05-06 10:29 ` Jonathan Neuschäfer
2021-05-06 11:53 ` Barnabás Pőcze
2021-05-02 23:28 ` [PATCH 2/4] HID: wiiu-drc: Implement touch reports Emmanuel Gil Peyrot
2021-05-05 22:43 ` Jonathan Neuschäfer [this message]
2021-05-06 10:20 ` Emmanuel Gil Peyrot
2021-05-02 23:28 ` [PATCH 3/4] HID: wiiu-drc: Add accelerometer, gyroscope and magnetometer readings Emmanuel Gil Peyrot
2021-05-02 23:28 ` [PATCH 4/4] HID: wiiu-drc: Add battery reporting Emmanuel Gil Peyrot
2021-05-06 11:45 ` Barnabás Pőcze
2021-05-19 8:59 ` [PATCH v3 0/4] HID: wiiu-drc: Add a driver for the Wii U gamepad Emmanuel Gil Peyrot
2021-05-19 8:59 ` [PATCH v3 1/4] HID: wiiu-drc: Add a driver for this gamepad Emmanuel Gil Peyrot
2021-05-19 8:59 ` [PATCH v3 2/4] HID: wiiu-drc: Implement touch reports Emmanuel Gil Peyrot
2021-05-19 8:59 ` [PATCH v3 3/4] HID: wiiu-drc: Add accelerometer, gyroscope and magnetometer readings Emmanuel Gil Peyrot
2021-05-19 8:59 ` [PATCH v3 4/4] HID: wiiu-drc: Add battery reporting Emmanuel Gil Peyrot
2021-09-21 15:08 ` [PATCH v3 0/4] HID: wiiu-drc: Add a driver for the Wii U gamepad Emmanuel Gil Peyrot
2021-10-19 9:14 ` Jiri Kosina
2021-10-19 9:27 ` Emmanuel Gil Peyrot
2021-10-19 9:30 ` Jiri Kosina
2021-10-19 9:36 ` Emmanuel Gil Peyrot
2021-11-04 11:21 ` Emmanuel Gil Peyrot
2021-11-05 17:27 ` François-Xavier Carton
2021-10-19 23:59 ` François-Xavier Carton
2021-10-20 6:24 ` Emmanuel Gil Peyrot
2021-10-19 11:04 ` [PATCH v4 0/5] HID: nintendo: Add support " Emmanuel Gil Peyrot
2021-10-19 11:04 ` [PATCH v4 1/5] HID: nintendo: split switch support into its own file Emmanuel Gil Peyrot
2021-10-22 8:32 ` kernel test robot
2021-10-19 11:04 ` [PATCH v4 2/5] HID: nintendo: drc: add support for the Wii U gamepad Emmanuel Gil Peyrot
2021-11-05 20:55 ` kernel test robot
2021-10-19 11:04 ` [PATCH v4 3/5] HID: nintendo: drc: implement touch reports Emmanuel Gil Peyrot
2021-10-19 11:04 ` [PATCH v4 4/5] HID: nintendo: drc: add accelerometer, gyroscope and magnetometer readings Emmanuel Gil Peyrot
2021-10-19 11:04 ` [PATCH v4 5/5] HID: nintendo: drc: add battery reporting Emmanuel Gil Peyrot
2021-10-27 8:10 ` [PATCH v4 0/5] HID: nintendo: Add support for the Wii U gamepad Jiri Kosina
2021-10-27 10:10 ` [PATCH v5 " Emmanuel Gil Peyrot
2021-10-27 10:10 ` [PATCH v5 1/5] HID: nintendo: split switch support into its own file Emmanuel Gil Peyrot
2021-10-27 10:10 ` [PATCH v5 2/5] HID: nintendo: drc: add support for the Wii U gamepad Emmanuel Gil Peyrot
2021-10-27 10:10 ` [PATCH v5 3/5] HID: nintendo: drc: implement touch reports Emmanuel Gil Peyrot
2021-10-27 10:10 ` [PATCH v5 4/5] HID: nintendo: drc: add accelerometer, gyroscope and magnetometer readings Emmanuel Gil Peyrot
2021-10-27 10:10 ` [PATCH v5 5/5] HID: nintendo: drc: add battery reporting Emmanuel Gil Peyrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YJMfq9MbY2guEhpv@latitude \
--to=j.ne@posteo.net \
--cc=ash@heyquark.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linkmauve@linkmauve.fr \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).