Re: [PATCH v4 2/2] dt-bindings: input: Goodix SPI HID Touchscreen

[Charles Wang <charles.goodix@gmail.com>]

On Fri, Jun 14, 2024 at 04:26:22PM +0100, Conor Dooley wrote:
> On Fri, Jun 14, 2024 at 08:15:38PM +0800, Charles Wang wrote:
> > The Goodix GT7986U touch controller report touch data according to the
> > HID protocol through the SPI bus. However, it is incompatible with
> > Microsoft's HID-over-SPI protocol.
> > 
> > Signed-off-by: Charles Wang <charles.goodix@gmail.com>
> > ---
> >  .../bindings/input/goodix,gt7986u.yaml        | 65 +++++++++++++++++++
> >  1 file changed, 65 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/input/goodix,gt7986u.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/input/goodix,gt7986u.yaml b/Documentation/devicetree/bindings/input/goodix,gt7986u.yaml
> > new file mode 100644
> > index 000000000..1c518d03b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/goodix,gt7986u.yaml
> > @@ -0,0 +1,65 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/input/goodix,gt7986u.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: GOODIX GT7986U SPI HID Touchscreen
> > +
> > +maintainers:
> > +  - Charles Wang <charles.goodix@gmail.com>
> > +
> > +description:
> > +  Supports the Goodix GT7986U touchscreen.
> > +  This touch controller reports data packaged according to the HID protocol,
> > +  but is incompatible with Microsoft's HID-over-SPI protocol.
> > +
> > +allOf:
> > +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - goodix,gt7986u
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  reset-gpios:
> > +    maxItems: 1
> > +    description: reset gpio the chip is connected to.
> > +
> > +  goodix,hid-report-addr:
> > +    description: the register address for retrieving HID report data.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +additionalProperties: false
> 
> unevaluatedProperties: false.
> 
> Please test your binding w/ dt_binding_check.
> 

Ack. I have tested it using "make dt_binding_check" and there were no errors
or warnings output. :(

Additionally, I have already run "pip3 install dtschema --upgrade". 

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - goodix,hid-report-addr
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    spi {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      num-cs = <1>;
> > +      cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
> 
> cs-gpios shouldn't be needed for a basic example.
> 
> Blank line here before the child node please.
> 
Ack

Charles

Thanks