[PATCH RESEND v3 0/3] Input: Add ektf2232 support

[PATCH RESEND v3 0/3] Input: Add ektf2232 support

[Andreas Kemnade]

Add support for the EKTF2232 to the ektf2127 driver which
contains support for similar chips.

Add the needed compatible to bindings and convert them.

Changes in v3:
- use dev_err_probe
- use i2c_get_match_data

Changes in v2:
- separate patch for adding compatible
- use match data for selecting status shift

Andreas Kemnade (3):
  dt-bindings: touchscreen: convert elan,ektf2127 to json-schema
  dt-bindings: touchscreen: elan,ektf2127: Add EKTF2232
  Input: ektf2127 - add ektf2232 support

 .../bindings/input/touchscreen/ektf2127.txt   | 25 --------
 .../input/touchscreen/elan,ektf2127.yaml      | 58 +++++++++++++++++++
 drivers/input/touchscreen/ektf2127.c          | 36 ++++++++++--
 3 files changed, 88 insertions(+), 31 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml

-- 
2.39.2

[PATCH RESEND v3 1/3] dt-bindings: touchscreen: convert elan,ektf2127 to json-schema

[Andreas Kemnade]

Convert EKTF2127 infrared touchscreen controller binding to DT schema
and add ektf2232 compatible.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/input/touchscreen/ektf2127.txt   | 25 --------
 .../input/touchscreen/elan,ektf2127.yaml      | 57 +++++++++++++++++++
 2 files changed, 57 insertions(+), 25 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
deleted file mode 100644
index c9f2c9f578e34..0000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Elan eKTF2127 I2C touchscreen controller
-
-Required properties:
- - compatible		  : "elan,ektf2127" or "elan,ektf2132"
- - reg			  : I2C slave address of the chip (0x40)
- - interrupts		  : interrupt specification for the ektf2127 interrupt
- - power-gpios		  : GPIO specification for the pin connected to the
-			    ektf2127's wake input. This needs to be driven high
-			    to take ektf2127 out of its low power state
-
-For additional optional properties see: touchscreen.txt
-
-Example:
-
-i2c@00000000 {
-	ektf2127: touchscreen@15 {
-		compatible = "elan,ektf2127";
-		reg = <0x15>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
-		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
new file mode 100644
index 0000000000000..5c4c29da0b11d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/elan,ektf2127.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTF2127 I2C touchscreen controller
+
+maintainers:
+  - Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - elan,ektf2127
+      - elan,ektf2132
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@15 {
+            compatible = "elan,ektf2127";
+            reg = <0x15>;
+            interrupt-parent = <&pio>;
+            interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+            power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+        };
+    };
+...
-- 
2.39.2

[PATCH RESEND v3 2/3] dt-bindings: touchscreen: elan,ektf2127: Add EKTF2232

[Andreas Kemnade]

Add a compatible for the EKTF2232, which is similar to other chips in this
document.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/input/touchscreen/elan,ektf2127.yaml     | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
index 5c4c29da0b11d..ff0ec3fd24c5d 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
@@ -17,6 +17,7 @@ properties:
     enum:
       - elan,ektf2127
       - elan,ektf2132
+      - elan,ektf2232
 
   reg:
     maxItems: 1
-- 
2.39.2

[PATCH RESEND v3 3/3] Input: ektf2127 - add ektf2232 support

[Andreas Kemnade]

The chip is similar, but has status bits at different positions,
so use the correct bits.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
---
 drivers/input/touchscreen/ektf2127.c | 36 +++++++++++++++++++++++-----
 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/input/touchscreen/ektf2127.c b/drivers/input/touchscreen/ektf2127.c
index cc3103b9cbfba..b6f5046f4b917 100644
--- a/drivers/input/touchscreen/ektf2127.c
+++ b/drivers/input/touchscreen/ektf2127.c
@@ -13,6 +13,7 @@
  * Hans de Goede <hdegoede@redhat.com>
  */
 
+#include <linux/bits.h>
 #include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
@@ -46,6 +47,11 @@ struct ektf2127_ts {
 	struct input_dev *input;
 	struct gpio_desc *power_gpios;
 	struct touchscreen_properties prop;
+	int status_shift;
+};
+
+struct ektf2127_i2c_chip_data {
+	int status_shift;
 };
 
 static void ektf2127_parse_coordinates(const u8 *buf, unsigned int touch_count,
@@ -112,8 +118,8 @@ static void ektf2127_report2_contact(struct ektf2127_ts *ts, int slot,
 
 static void ektf2127_report2_event(struct ektf2127_ts *ts, const u8 *buf)
 {
-	ektf2127_report2_contact(ts, 0, &buf[1], !!(buf[7] & 2));
-	ektf2127_report2_contact(ts, 1, &buf[4], !!(buf[7] & 4));
+	ektf2127_report2_contact(ts, 0, &buf[1], !!(buf[7] & BIT(ts->status_shift)));
+	ektf2127_report2_contact(ts, 1, &buf[4], !!(buf[7] & BIT(ts->status_shift + 1)));
 
 	input_mt_sync_frame(ts->input);
 	input_sync(ts->input);
@@ -247,6 +253,7 @@ static int ektf2127_query_dimension(struct i2c_client *client, bool width)
 static int ektf2127_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
+	const struct ektf2127_i2c_chip_data *chip_data;
 	struct ektf2127_ts *ts;
 	struct input_dev *input;
 	u8 buf[4];
@@ -303,6 +310,13 @@ static int ektf2127_probe(struct i2c_client *client)
 		return error;
 
 	ts->input = input;
+
+	chip_data = i2c_get_match_data(client);
+	if (!chip_data)
+		return dev_err_probe(&client->dev, -EINVAL, "missing chip data\n");
+
+	ts->status_shift = chip_data->status_shift;
+
 	input_set_drvdata(input, ts);
 
 	error = devm_request_threaded_irq(dev, client->irq,
@@ -325,18 +339,28 @@ static int ektf2127_probe(struct i2c_client *client)
 	return 0;
 }
 
+static const struct ektf2127_i2c_chip_data ektf2127_data = {
+	.status_shift = 1,
+};
+
+static const struct ektf2127_i2c_chip_data ektf2232_data = {
+	.status_shift = 0,
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id ektf2127_of_match[] = {
-	{ .compatible = "elan,ektf2127" },
-	{ .compatible = "elan,ektf2132" },
+	{ .compatible = "elan,ektf2127",	.data = &ektf2127_data},
+	{ .compatible = "elan,ektf2132",	.data = &ektf2127_data},
+	{ .compatible = "elan,ektf2232",	.data = &ektf2232_data},
 	{}
 };
 MODULE_DEVICE_TABLE(of, ektf2127_of_match);
 #endif
 
 static const struct i2c_device_id ektf2127_i2c_id[] = {
-	{ "ektf2127", 0 },
-	{ "ektf2132", 0 },
+	{ .name = "ektf2127", .driver_data = (long)&ektf2127_data },
+	{ .name = "ektf2132", .driver_data = (long)&ektf2127_data },
+	{ .name = "ektf2232", .driver_data = (long)&ektf2232_data },
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, ektf2127_i2c_id);
-- 
2.39.2

Re: [PATCH RESEND v3 0/3] Input: Add ektf2232 support

[Dmitry Torokhov]

On Sat, Jun 22, 2024 at 12:40:19AM +0200, Andreas Kemnade wrote:
> Add support for the EKTF2232 to the ektf2127 driver which
> contains support for similar chips.
> 
> Add the needed compatible to bindings and convert them.
> 
> Changes in v3:
> - use dev_err_probe
> - use i2c_get_match_data
> 
> Changes in v2:
> - separate patch for adding compatible
> - use match data for selecting status shift
> 
> Andreas Kemnade (3):
>   dt-bindings: touchscreen: convert elan,ektf2127 to json-schema
>   dt-bindings: touchscreen: elan,ektf2127: Add EKTF2232
>   Input: ektf2127 - add ektf2232 support

Applied the lot, thank you.

-- 
Dmitry