* [RFC PATCH v4 0/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 @ 2024-10-01 18:06 Werner Sembach 2024-10-01 18:06 ` [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices Werner Sembach 0 siblings, 1 reply; 11+ messages in thread From: Werner Sembach @ 2024-10-01 18:06 UTC (permalink / raw) Cc: bentiss, dri-devel, hdegoede, jelle, jikos, lee, linux-input, linux-kernel, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, pavel, cs Just wanted to send my current state as previous version had a null pointer dereference. On this toppic, why does hdev have a hdev->driver_data and a hdev->dev.driver_data which are not the same? I assume hdev->driver_data is for the ll_driver and hdev->dev.driver_data for the driver? ^ permalink raw reply [flat|nested] 11+ messages in thread
* [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-01 18:06 [RFC PATCH v4 0/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 Werner Sembach @ 2024-10-01 18:06 ` Werner Sembach 2024-10-02 9:52 ` Ilpo Järvinen 0 siblings, 1 reply; 11+ messages in thread From: Werner Sembach @ 2024-10-01 18:06 UTC (permalink / raw) To: Hans de Goede, Ilpo Järvinen, Werner Sembach Cc: bentiss, dri-devel, jelle, jikos, lee, linux-input, linux-kernel, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, pavel, cs, platform-driver-x86 The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a per-key controllable RGB keyboard backlight. The firmware API for it is implemented via WMI. To make the backlight userspace configurable this driver emulates a LampArray HID device and translates the input from hidraw to the corresponding WMI calls. This is a new approach as the leds subsystem lacks a suitable UAPI for per-key keyboard backlights, and like this no new UAPI needs to be established. v2: Integrated Armins feedback and fixed kernel test robot warnings. v3: Fixed borked subject line of v2. v4: Remove unrequired WMI mutex. Move device checking from probe to init. Fix device checking working exactly reverse as it should. Fix null pointer dereference because, hdev->driver_data != hdev->dev.driver_data. Co-developed-by: Christoffer Sandberg <cs@tuxedo.de> Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://lore.kernel.org/all/1fb08a74-62c7-4d0c-ba5d-648e23082dcb@tuxedocomputers.com/ --- MAINTAINERS | 6 + drivers/platform/x86/Kconfig | 2 + drivers/platform/x86/Makefile | 3 + drivers/platform/x86/tuxedo/Kbuild | 9 + drivers/platform/x86/tuxedo/Kconfig | 14 + .../x86/tuxedo/tuxedo_nb04_wmi_ab_init.c | 99 +++ .../x86/tuxedo/tuxedo_nb04_wmi_ab_init.h | 19 + .../tuxedo_nb04_wmi_ab_virtual_lamp_array.c | 735 ++++++++++++++++++ .../tuxedo_nb04_wmi_ab_virtual_lamp_array.h | 18 + .../x86/tuxedo/tuxedo_nb04_wmi_util.c | 82 ++ .../x86/tuxedo/tuxedo_nb04_wmi_util.h | 112 +++ 11 files changed, 1099 insertions(+) create mode 100644 drivers/platform/x86/tuxedo/Kbuild create mode 100644 drivers/platform/x86/tuxedo/Kconfig create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h diff --git a/MAINTAINERS b/MAINTAINERS index cc40a9d9b8cd1..3385ad51af194 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -23358,6 +23358,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git turbostat F: tools/power/x86/turbostat/ F: tools/testing/selftests/turbostat/ +TUXEDO DRIVERS +M: Werner Sembach <wse@tuxedocomputers.com> +L: platform-driver-x86@vger.kernel.org +S: Supported +F: drivers/platform/x86/tuxedo/ + TW5864 VIDEO4LINUX DRIVER M: Bluecherry Maintainers <maintainers@bluecherrydvr.com> M: Andrey Utkin <andrey.utkin@corp.bluecherry.net> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index ddfccc226751f..c7cffb222adac 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1196,3 +1196,5 @@ config P2SB The main purpose of this library is to unhide P2SB device in case firmware kept it hidden on some platforms in order to access devices behind it. + +source "drivers/platform/x86/tuxedo/Kconfig" diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index e1b1429470674..1562dcd7ad9a5 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -153,3 +153,6 @@ obj-$(CONFIG_WINMATE_FM07_KEYS) += winmate-fm07-keys.o # SEL obj-$(CONFIG_SEL3350_PLATFORM) += sel3350-platform.o + +# TUXEDO +obj-y += tuxedo/ diff --git a/drivers/platform/x86/tuxedo/Kbuild b/drivers/platform/x86/tuxedo/Kbuild new file mode 100644 index 0000000000000..5a3506ab98131 --- /dev/null +++ b/drivers/platform/x86/tuxedo/Kbuild @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# TUXEDO X86 Platform Specific Drivers +# + +tuxedo_nb04_wmi_ab-y := tuxedo_nb04_wmi_ab_init.o +tuxedo_nb04_wmi_ab-y += tuxedo_nb04_wmi_util.o +tuxedo_nb04_wmi_ab-y += tuxedo_nb04_wmi_ab_virtual_lamp_array.o +obj-$(CONFIG_TUXEDO_NB04_WMI_AB) += tuxedo_nb04_wmi_ab.o diff --git a/drivers/platform/x86/tuxedo/Kconfig b/drivers/platform/x86/tuxedo/Kconfig new file mode 100644 index 0000000000000..b1f7c6ceeaae4 --- /dev/null +++ b/drivers/platform/x86/tuxedo/Kconfig @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# TUXEDO X86 Platform Specific Drivers +# + +menuconfig TUXEDO_NB04_WMI_AB + tristate "TUXEDO NB04 WMI AB Platform Driver" + default m + help + This driver implements the WMI AB device found on TUXEDO Notebooks + with board vendor NB04. For the time being only the keyboard backlight + control is implemented. + + When compiled as a module it will be called tuxedo_nb04_wmi_ab. diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c new file mode 100644 index 0000000000000..bd5bca3b15bc7 --- /dev/null +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This driver implements the WMI AB device found on TUXEDO Notebooks with board + * vendor NB04. + * + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/wmi.h> +#include <linux/dmi.h> + +#include "tuxedo_nb04_wmi_ab_virtual_lamp_array.h" + +#include "tuxedo_nb04_wmi_ab_init.h" + +static int probe(struct wmi_device *wdev, const void __always_unused *context) +{ + struct tuxedo_nb04_wmi_driver_data_t *driver_data; + int ret; + + driver_data = devm_kzalloc(&wdev->dev, sizeof(*driver_data), GFP_KERNEL); + if (!driver_data) + return -ENOMEM; + + dev_set_drvdata(&wdev->dev, driver_data); + + ret = tuxedo_nb04_virtual_lamp_array_add_device(wdev, + &driver_data->virtual_lamp_array_hdev); + if (ret) + return ret; + + return 0; +} + +static void remove(struct wmi_device *wdev) +{ + struct tuxedo_nb04_wmi_driver_data_t *driver_data = dev_get_drvdata(&wdev->dev); + + hid_destroy_device(driver_data->virtual_lamp_array_hdev); +} + +static const struct wmi_device_id tuxedo_nb04_wmi_ab_device_ids[] = { + { .guid_string = "80C9BAA6-AC48-4538-9234-9F81A55E7C85" }, + { } +}; +MODULE_DEVICE_TABLE(wmi, tuxedo_nb04_wmi_ab_device_ids); + +static struct wmi_driver tuxedo_nb04_wmi_ab_driver = { + .driver = { + .name = "tuxedo_nb04_wmi_ab", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .id_table = tuxedo_nb04_wmi_ab_device_ids, + .probe = probe, + .remove = remove, + .no_singleton = true, +}; + +// We don't know if the WMI API is stable and how unique the GUID is for this ODM. To be on the safe +// side we therefore only run this driver on tested devices defined by this list. +static const struct dmi_system_id tested_devices_dmi_table[] __initconst = { + { + // TUXEDO Sirius 16 Gen1 + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TUXEDO"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "APX958"), + }, + }, + { + // TUXEDO Sirius 16 Gen2 + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TUXEDO"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "AHP958"), + }, + }, + { } +}; + +static int __init tuxedo_nb04_wmi_ab_init(void) +{ + if (!dmi_check_system(tested_devices_dmi_table)) + return -ENODEV; + + return wmi_driver_register(&tuxedo_nb04_wmi_ab_driver); +} +module_init(tuxedo_nb04_wmi_ab_init); + +static void __exit tuxedo_nb04_wmi_ab_exit(void) +{ + return wmi_driver_unregister(&tuxedo_nb04_wmi_ab_driver); +} +module_exit(tuxedo_nb04_wmi_ab_exit); + +MODULE_DESCRIPTION("Virtual HID LampArray interface for TUXEDO NB04 devices"); +MODULE_AUTHOR("Werner Sembach <wse@tuxedocomputers.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h new file mode 100644 index 0000000000000..3306e3d28bcab --- /dev/null +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This driver implements the WMI AB device found on TUXEDO Notebooks with board + * vendor NB04. + * + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com + */ + +#ifndef TUXEDO_NB04_WMI_AB_INIT_H +#define TUXEDO_NB04_WMI_AB_INIT_H + +#include <linux/mutex.h> +#include <linux/hid.h> + +struct tuxedo_nb04_wmi_driver_data_t { + struct hid_device *virtual_lamp_array_hdev; +}; + +#endif diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c new file mode 100644 index 0000000000000..906eb59c5cfd2 --- /dev/null +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c @@ -0,0 +1,735 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This code gives the built in RGB lighting of the TUXEDO NB04 devices a + * standardised interface, namely HID LampArray. + * + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "tuxedo_nb04_wmi_util.h" + +#include "tuxedo_nb04_wmi_ab_virtual_lamp_array.h" + +enum report_ids { + LAMP_ARRAY_ATTRIBUTES_REPORT_ID = 0x01, + LAMP_ATTRIBUTES_REQUEST_REPORT_ID = 0x02, + LAMP_ATTRIBUTES_RESPONSE_REPORT_ID = 0x03, + LAMP_MULTI_UPDATE_REPORT_ID = 0x04, + LAMP_RANGE_UPDATE_REPORT_ID = 0x05, + LAMP_ARRAY_CONTROL_REPORT_ID = 0x06, +}; + +static const uint8_t sirius_16_ansii_kbl_mapping[] = { + 0x29, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, + 0x43, 0x44, 0x45, 0xf1, 0x46, 0x4c, 0x4a, 0x4d, 0x4b, 0x4e, + 0x35, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, + 0x27, 0x2d, 0x2e, 0x2a, 0x53, 0x55, 0x54, 0x56, + 0x2b, 0x14, 0x1a, 0x08, 0x15, 0x17, 0x1c, 0x18, 0x0c, 0x12, + 0x13, 0x2f, 0x30, 0x31, 0x5f, 0x60, 0x61, + 0x39, 0x04, 0x16, 0x07, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x0f, + 0x33, 0x34, 0x28, 0x5c, 0x5d, 0x5e, 0x57, + 0xe1, 0x1d, 0x1b, 0x06, 0x19, 0x05, 0x11, 0x10, 0x36, 0x37, + 0x38, 0xe5, 0x52, 0x59, 0x5a, 0x5b, + 0xe0, 0xfe, 0xe3, 0xe2, 0x2c, 0xe6, 0x65, 0xe4, 0x50, 0x51, + 0x4f, 0x62, 0x63, 0x58 +}; + +static const uint32_t sirius_16_ansii_kbl_mapping_pos_x[] = { + 25000, 41700, 58400, 75100, 91800, 108500, 125200, 141900, 158600, 175300, + 192000, 208700, 225400, 242100, 258800, 275500, 294500, 311200, 327900, 344600, + 24500, 42500, 61000, 79500, 98000, 116500, 135000, 153500, 172000, 190500, + 209000, 227500, 246000, 269500, 294500, 311200, 327900, 344600, + 31000, 51500, 70000, 88500, 107000, 125500, 144000, 162500, 181000, 199500, + 218000, 236500, 255000, 273500, 294500, 311200, 327900, + 33000, 57000, 75500, 94000, 112500, 131000, 149500, 168000, 186500, 205000, + 223500, 242000, 267500, 294500, 311200, 327900, 344600, + 37000, 66000, 84500, 103000, 121500, 140000, 158500, 177000, 195500, 214000, + 232500, 251500, 273500, 294500, 311200, 327900, + 28000, 47500, 66000, 84500, 140000, 195500, 214000, 234000, 255000, 273500, + 292000, 311200, 327900, 344600 +}; + +static const uint32_t sirius_16_ansii_kbl_mapping_pos_y[] = { + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, + 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, + 85500, 85500, 85500, 85500, 85500, 85500, 85500, + 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, + 103500, 103500, 103500, 103500, 103500, 103500, 94500, + 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, + 121500, 121500, 129000, 121500, 121500, 121500, + 139500, 139500, 139500, 139500, 139500, 139500, 139500, 139500, 147000, 147000, + 147000, 139500, 139500, 130500 +}; + +static const uint32_t sirius_16_ansii_kbl_mapping_pos_z[] = { + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, + 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, + 5500, 5500, 5500, 5500, 5500, 5500, 5500, + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, + 5750, 5750, 5750, 5750, 5750, 5750, 5625, + 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, + 6000, 6000, 6125, 6000, 6000, 6000, + 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6375, 6375, + 6375, 6250, 6250, 6125 +}; + +static const uint8_t sirius_16_iso_kbl_mapping[] = { + 0x29, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, + 0x43, 0x44, 0x45, 0xf1, 0x46, 0x4c, 0x4a, 0x4d, 0x4b, 0x4e, + 0x35, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, + 0x27, 0x2d, 0x2e, 0x2a, 0x53, 0x55, 0x54, 0x56, + 0x2b, 0x14, 0x1a, 0x08, 0x15, 0x17, 0x1c, 0x18, 0x0c, 0x12, + 0x13, 0x2f, 0x30, 0x5f, 0x60, 0x61, + 0x39, 0x04, 0x16, 0x07, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x0f, + 0x33, 0x34, 0x32, 0x28, 0x5c, 0x5d, 0x5e, 0x57, + 0xe1, 0x64, 0x1d, 0x1b, 0x06, 0x19, 0x05, 0x11, 0x10, 0x36, + 0x37, 0x38, 0xe5, 0x52, 0x59, 0x5a, 0x5b, + 0xe0, 0xfe, 0xe3, 0xe2, 0x2c, 0xe6, 0x65, 0xe4, 0x50, 0x51, + 0x4f, 0x62, 0x63, 0x58 +}; + +static const uint32_t sirius_16_iso_kbl_mapping_pos_x[] = { + 25000, 41700, 58400, 75100, 91800, 108500, 125200, 141900, 158600, 175300, + 192000, 208700, 225400, 242100, 258800, 275500, 294500, 311200, 327900, 344600, + 24500, 42500, 61000, 79500, 98000, 116500, 135000, 153500, 172000, 190500, + 209000, 227500, 246000, 269500, 294500, 311200, 327900, 344600, + 31000, 51500, 70000, 88500, 107000, 125500, 144000, 162500, 181000, 199500, + 218000, 234500, 251000, 294500, 311200, 327900, + 33000, 57000, 75500, 94000, 112500, 131000, 149500, 168000, 186500, 205000, + 223500, 240000, 256500, 271500, 294500, 311200, 327900, 344600, + 28000, 47500, 66000, 84500, 103000, 121500, 140000, 158500, 177000, 195500, + 214000, 232500, 251500, 273500, 294500, 311200, 327900, + 28000, 47500, 66000, 84500, 140000, 195500, 214000, 234000, 255000, 273500, + 292000, 311200, 327900, 344600 +}; + +static const uint32_t sirius_16_iso_kbl_mapping_pos_y[] = { + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, + 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, + 85500, 85500, 85500, 85500, 85500, 85500, + 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, + 103500, 103500, 103500, 94500, 103500, 103500, 103500, 94500, + 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, + 121500, 121500, 121500, 129000, 121500, 121500, 121500, + 139500, 139500, 139500, 139500, 139500, 139500, 139500, 139500, 147000, 147000, + 147000, 139500, 139500, 130500 +}; + +static const uint32_t sirius_16_iso_kbl_mapping_pos_z[] = { + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, + 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, + 5500, 5500, 5500, 5500, 5500, 5500, + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5625, + 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, + 6000, 6000, 6000, 6125, 6000, 6000, 6000, + 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6375, 6375, + 6375, 6250, 6250, 6125 +}; + +struct driver_data_t { + uint8_t keyboard_type; + uint8_t lamp_count; + uint8_t next_lamp_id; + union tuxedo_nb04_wmi_496_b_in_80_b_out_input next_kbl_set_multiple_keys_input; +}; + + +static int ll_start(struct hid_device *hdev) +{ + struct driver_data_t *driver_data; + struct wmi_device *wdev = to_wmi_device(hdev->dev.parent); + int ret; + union tuxedo_nb04_wmi_8_b_in_80_b_out_input input; + union tuxedo_nb04_wmi_8_b_in_80_b_out_output output; + + driver_data = devm_kzalloc(&hdev->dev, sizeof(*driver_data), GFP_KERNEL); + if (!driver_data) + return -ENOMEM; + + input.get_device_status_input.device_type = WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_KEYBOARD; + ret = tuxedo_nb04_wmi_8_b_in_80_b_out(wdev, WMI_AB_GET_DEVICE_STATUS, &input, &output); + if (ret) + return ret; + + driver_data->keyboard_type = output.get_device_status_output.keyboard_physical_layout; + driver_data->lamp_count = sizeof(sirius_16_ansii_kbl_mapping); + driver_data->next_lamp_id = 0; + + hdev->driver_data = driver_data; + + return ret; +} + + +static void ll_stop(struct hid_device __always_unused *hdev) +{ +} + + +static int ll_open(struct hid_device __always_unused *hdev) +{ + return 0; +} + + +static void ll_close(struct hid_device __always_unused *hdev) +{ +} + + +static uint8_t report_descriptor[327] = { + 0x05, 0x59, // Usage Page (Lighting and Illumination) + 0x09, 0x01, // Usage (Lamp Array) + 0xa1, 0x01, // Collection (Application) + 0x85, LAMP_ARRAY_ATTRIBUTES_REPORT_ID, // Report ID (1) + 0x09, 0x02, // Usage (Lamp Array Attributes Report) + 0xa1, 0x02, // Collection (Logical) + 0x09, 0x03, // Usage (Lamp Count) + 0x15, 0x00, // Logical Minimum (0) + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) + 0x75, 0x10, // Report Size (16) + 0x95, 0x01, // Report Count (1) + 0xb1, 0x03, // Feature (Cnst,Var,Abs) + 0x09, 0x04, // Usage (Bounding Box Width In Micrometers) + 0x09, 0x05, // Usage (Bounding Box Height In Micrometers) + 0x09, 0x06, // Usage (Bounding Box Depth In Micrometers) + 0x09, 0x07, // Usage (Lamp Array Kind) + 0x09, 0x08, // Usage (Min Update Interval In Microseconds) + 0x15, 0x00, // Logical Minimum (0) + 0x27, 0xff, 0xff, 0xff, 0x7f, // Logical Maximum (2147483647) + 0x75, 0x20, // Report Size (32) + 0x95, 0x05, // Report Count (5) + 0xb1, 0x03, // Feature (Cnst,Var,Abs) + 0xc0, // End Collection + 0x85, LAMP_ATTRIBUTES_REQUEST_REPORT_ID, // Report ID (2) + 0x09, 0x20, // Usage (Lamp Attributes Request Report) + 0xa1, 0x02, // Collection (Logical) + 0x09, 0x21, // Usage (Lamp Id) + 0x15, 0x00, // Logical Minimum (0) + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) + 0x75, 0x10, // Report Size (16) + 0x95, 0x01, // Report Count (1) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0xc0, // End Collection + 0x85, LAMP_ATTRIBUTES_RESPONSE_REPORT_ID, // Report ID (3) + 0x09, 0x22, // Usage (Lamp Attributes Response Report) + 0xa1, 0x02, // Collection (Logical) + 0x09, 0x21, // Usage (Lamp Id) + 0x15, 0x00, // Logical Minimum (0) + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) + 0x75, 0x10, // Report Size (16) + 0x95, 0x01, // Report Count (1) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0x09, 0x23, // Usage (Position X In Micrometers) + 0x09, 0x24, // Usage (Position Y In Micrometers) + 0x09, 0x25, // Usage (Position Z In Micrometers) + 0x09, 0x27, // Usage (Update Latency In Microseconds) + 0x09, 0x26, // Usage (Lamp Purposes) + 0x15, 0x00, // Logical Minimum (0) + 0x27, 0xff, 0xff, 0xff, 0x7f, // Logical Maximum (2147483647) + 0x75, 0x20, // Report Size (32) + 0x95, 0x05, // Report Count (5) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0x09, 0x28, // Usage (Red Level Count) + 0x09, 0x29, // Usage (Green Level Count) + 0x09, 0x2a, // Usage (Blue Level Count) + 0x09, 0x2b, // Usage (Intensity Level Count) + 0x09, 0x2c, // Usage (Is Programmable) + 0x09, 0x2d, // Usage (Input Binding) + 0x15, 0x00, // Logical Minimum (0) + 0x26, 0xff, 0x00, // Logical Maximum (255) + 0x75, 0x08, // Report Size (8) + 0x95, 0x06, // Report Count (6) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0xc0, // End Collection + 0x85, LAMP_MULTI_UPDATE_REPORT_ID, // Report ID (4) + 0x09, 0x50, // Usage (Lamp Multi Update Report) + 0xa1, 0x02, // Collection (Logical) + 0x09, 0x03, // Usage (Lamp Count) + 0x09, 0x55, // Usage (Lamp Update Flags) + 0x15, 0x00, // Logical Minimum (0) + 0x25, 0x08, // Logical Maximum (8) + 0x75, 0x08, // Report Size (8) + 0x95, 0x02, // Report Count (2) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0x09, 0x21, // Usage (Lamp Id) + 0x15, 0x00, // Logical Minimum (0) + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) + 0x75, 0x10, // Report Size (16) + 0x95, 0x08, // Report Count (8) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x15, 0x00, // Logical Minimum (0) + 0x26, 0xff, 0x00, // Logical Maximum (255) + 0x75, 0x08, // Report Size (8) + 0x95, 0x20, // Report Count (32) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0xc0, // End Collection + 0x85, LAMP_RANGE_UPDATE_REPORT_ID, // Report ID (5) + 0x09, 0x60, // Usage (Lamp Range Update Report) + 0xa1, 0x02, // Collection (Logical) + 0x09, 0x55, // Usage (Lamp Update Flags) + 0x15, 0x00, // Logical Minimum (0) + 0x25, 0x08, // Logical Maximum (8) + 0x75, 0x08, // Report Size (8) + 0x95, 0x01, // Report Count (1) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0x09, 0x61, // Usage (Lamp Id Start) + 0x09, 0x62, // Usage (Lamp Id End) + 0x15, 0x00, // Logical Minimum (0) + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) + 0x75, 0x10, // Report Size (16) + 0x95, 0x02, // Report Count (2) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0x09, 0x51, // Usage (Red Update Channel) + 0x09, 0x52, // Usage (Green Update Channel) + 0x09, 0x53, // Usage (Blue Update Channel) + 0x09, 0x54, // Usage (Intensity Update Channel) + 0x15, 0x00, // Logical Minimum (0) + 0x26, 0xff, 0x00, // Logical Maximum (255) + 0x75, 0x08, // Report Size (8) + 0x95, 0x04, // Report Count (4) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0xc0, // End Collection + 0x85, LAMP_ARRAY_CONTROL_REPORT_ID, // Report ID (6) + 0x09, 0x70, // Usage (Lamp Array Control Report) + 0xa1, 0x02, // Collection (Logical) + 0x09, 0x71, // Usage (Autonomous Mode) + 0x15, 0x00, // Logical Minimum (0) + 0x25, 0x01, // Logical Maximum (1) + 0x75, 0x08, // Report Size (8) + 0x95, 0x01, // Report Count (1) + 0xb1, 0x02, // Feature (Data,Var,Abs) + 0xc0, // End Collection + 0xc0 // End Collection +}; + +static int ll_parse(struct hid_device *hdev) +{ + return hid_parse_report(hdev, report_descriptor, sizeof(report_descriptor)); +} + + +struct __packed lamp_array_attributes_report_t { + const uint8_t report_id; + uint16_t lamp_count; + uint32_t bounding_box_width_in_micrometers; + uint32_t bounding_box_height_in_micrometers; + uint32_t bounding_box_depth_in_micrometers; + uint32_t lamp_array_kind; + uint32_t min_update_interval_in_microseconds; +}; + +static int handle_lamp_array_attributes_report(struct hid_device *hdev, + struct lamp_array_attributes_report_t *rep) +{ + struct driver_data_t *driver_data = hdev->driver_data; + + rep->lamp_count = driver_data->lamp_count; + rep->bounding_box_width_in_micrometers = 368000; + rep->bounding_box_height_in_micrometers = 266000; + rep->bounding_box_depth_in_micrometers = 30000; + // LampArrayKindKeyboard, see "26.2.1 LampArrayKind Values" of "HID Usage Tables v1.5" + rep->lamp_array_kind = 1; + // Some guessed value for interval microseconds + rep->min_update_interval_in_microseconds = 500; + + return sizeof(struct lamp_array_attributes_report_t); +} + + +struct __packed lamp_attributes_request_report_t { + const uint8_t report_id; + uint16_t lamp_id; +}; + +static int handle_lamp_attributes_request_report(struct hid_device *hdev, + struct lamp_attributes_request_report_t *rep) +{ + struct driver_data_t *driver_data = hdev->driver_data; + + if (rep->lamp_id < driver_data->lamp_count) + driver_data->next_lamp_id = rep->lamp_id; + else + driver_data->next_lamp_id = 0; + + return sizeof(struct lamp_attributes_request_report_t); +} + + +struct __packed lamp_attributes_response_report_t { + const uint8_t report_id; + uint16_t lamp_id; + uint32_t position_x_in_micrometers; + uint32_t position_y_in_micrometers; + uint32_t position_z_in_micrometers; + uint32_t update_latency_in_microseconds; + uint32_t lamp_purpose; + uint8_t red_level_count; + uint8_t green_level_count; + uint8_t blue_level_count; + uint8_t intensity_level_count; + uint8_t is_programmable; + uint8_t input_binding; +}; + +static int handle_lamp_attributes_response_report(struct hid_device *hdev, + struct lamp_attributes_response_report_t *rep) +{ + struct driver_data_t *driver_data = hdev->driver_data; + uint16_t lamp_id = driver_data->next_lamp_id; + const uint8_t *kbl_mapping; + const uint32_t *kbl_mapping_pos_x, *kbl_mapping_pos_y, *kbl_mapping_pos_z; + + rep->lamp_id = lamp_id; + // Some guessed value for latency microseconds + rep->update_latency_in_microseconds = 100; + // LampPurposeControl, see "26.3.1 LampPurposes Flags" of "HID Usage Tables v1.5" + rep->lamp_purpose = 1; + rep->red_level_count = 0xff; + rep->green_level_count = 0xff; + rep->blue_level_count = 0xff; + rep->intensity_level_count = 0xff; + rep->is_programmable = 1; + + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) { + kbl_mapping = &sirius_16_ansii_kbl_mapping[0]; + kbl_mapping_pos_x = &sirius_16_ansii_kbl_mapping_pos_x[0]; + kbl_mapping_pos_y = &sirius_16_ansii_kbl_mapping_pos_y[0]; + kbl_mapping_pos_z = &sirius_16_ansii_kbl_mapping_pos_z[0]; + } else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) { + kbl_mapping = &sirius_16_iso_kbl_mapping[0]; + kbl_mapping_pos_x = &sirius_16_iso_kbl_mapping_pos_x[0]; + kbl_mapping_pos_y = &sirius_16_iso_kbl_mapping_pos_y[0]; + kbl_mapping_pos_z = &sirius_16_iso_kbl_mapping_pos_z[0]; + } else + return -EINVAL; + + if (kbl_mapping[lamp_id] <= 0xe8) + rep->input_binding = kbl_mapping[lamp_id]; + else + // Everything bigger is reserved/undefined, see "10 Keyboard/Keypad Page (0x07)" of + // "HID Usage Tables v1.5" and should return 0, see "26.8.3 Lamp Attributes" of the + // same document. + rep->input_binding = 0; + rep->position_x_in_micrometers = kbl_mapping_pos_x[lamp_id]; + rep->position_y_in_micrometers = kbl_mapping_pos_y[lamp_id]; + rep->position_z_in_micrometers = kbl_mapping_pos_z[lamp_id]; + + driver_data->next_lamp_id = (driver_data->next_lamp_id + 1) % driver_data->lamp_count; + + return sizeof(struct lamp_attributes_response_report_t); +} + + +#define LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE BIT(0) + +struct __packed lamp_multi_update_report_t { + const uint8_t report_id; + uint8_t lamp_count; + uint8_t lamp_update_flags; + uint16_t lamp_id[8]; + struct { + uint8_t red; + uint8_t green; + uint8_t blue; + uint8_t intensity; + } update_channels[8]; +}; + +static int handle_lamp_multi_update_report(struct hid_device *hdev, + struct lamp_multi_update_report_t *rep) +{ + struct driver_data_t *driver_data = hdev->driver_data; + struct wmi_device *wdev = to_wmi_device(hdev->dev.parent); + int ret; + uint8_t lamp_count = 0, key_id, key_id_j; + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *next = + &driver_data->next_kbl_set_multiple_keys_input; + union tuxedo_nb04_wmi_496_b_in_80_b_out_output output; + + // Catching missformated lamp_multi_update_report and fail silently according to + // "HID Usage Tables v1.5" + for (int i = 0; i < rep->lamp_count; ++i) { + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); + + if (rep->lamp_id[i] > lamp_count) { + pr_debug("Out of bounds lamp_id in lamp_multi_update_report. Skippng whole report!\n"); + return sizeof(struct lamp_multi_update_report_t); + } + + for (int j = i + 1; j < rep->lamp_count; ++j) { + if (rep->lamp_id[i] == rep->lamp_id[j]) { + pr_debug("Duplicate lamp_id in lamp_multi_update_report. Skippng whole report!\n"); + return sizeof(struct lamp_multi_update_report_t); + } + } + } + + for (int i = 0; i < rep->lamp_count; ++i) { + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) + key_id = sirius_16_ansii_kbl_mapping[rep->lamp_id[i]]; + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) + key_id = sirius_16_iso_kbl_mapping[rep->lamp_id[i]]; + + for (int j = 0; j < WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX; ++j) { + key_id_j = next->kbl_set_multiple_keys_input.lighting_settings[j].key_id; + if (key_id_j == 0x00 || key_id_j == key_id) { + if (key_id_j == 0x00) + next->kbl_set_multiple_keys_input.lighting_setting_count = + j + 1; + next->kbl_set_multiple_keys_input.lighting_settings[j].key_id = + key_id; + // While this driver respects + // intensity_update_channel according to "HID + // Usage Tables v1.5" also on RGB leds, the + // Microsoft MacroPad reference implementation + // (https://github.com/microsoft/RP2040MacropadHidSample + // 1d6c3ad) does not and ignores it. If it turns + // out that Windows writes intensity = 0 for RGB + // leds instead of intensity = 255, this driver + // should also irgnore the + // intensity_update_channel. + next->kbl_set_multiple_keys_input.lighting_settings[j].red = + rep->update_channels[i].red + * rep->update_channels[i].intensity / 0xff; + next->kbl_set_multiple_keys_input.lighting_settings[j].green = + rep->update_channels[i].green + * rep->update_channels[i].intensity / 0xff; + next->kbl_set_multiple_keys_input.lighting_settings[j].blue = + rep->update_channels[i].blue + * rep->update_channels[i].intensity / 0xff; + + break; + } + } + } + + if (rep->lamp_update_flags & LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE) { + ret = tuxedo_nb04_wmi_496_b_in_80_b_out(wdev, WMI_AB_KBL_SET_MULTIPLE_KEYS, next, + &output); + memset(next, 0, sizeof(union tuxedo_nb04_wmi_496_b_in_80_b_out_input)); + if (ret) + return ret; + } + + return sizeof(struct lamp_multi_update_report_t); +} + + +struct __packed lamp_range_update_report_t { + const uint8_t report_id; + uint8_t lamp_update_flags; + uint16_t lamp_id_start; + uint16_t lamp_id_end; + uint8_t red_update_channel; + uint8_t green_update_channel; + uint8_t blue_update_channel; + uint8_t intensity_update_channel; +}; + +static int handle_lamp_range_update_report(struct hid_device *hdev, + struct lamp_range_update_report_t *report) +{ + struct driver_data_t *driver_data = hdev->driver_data; + int ret; + uint8_t lamp_count; + struct lamp_multi_update_report_t lamp_multi_update_report = { + .report_id = LAMP_MULTI_UPDATE_REPORT_ID + }; + + // Catching missformated lamp_range_update_report and fail silently according to + // "HID Usage Tables v1.5" + if (report->lamp_id_start > report->lamp_id_end) { + pr_debug("lamp_id_start > lamp_id_end in lamp_range_update_report. Skippng whole report!\n"); + return sizeof(struct lamp_range_update_report_t); + } + + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); + + if (report->lamp_id_end > lamp_count - 1) { + pr_debug("Out of bounds lamp_id_* in lamp_range_update_report. Skippng whole report!\n"); + return sizeof(struct lamp_range_update_report_t); + } + + // Break handle_lamp_range_update_report call down to multiple + // handle_lamp_multi_update_report calls to easily ensure that mixing + // handle_lamp_range_update_report and handle_lamp_multi_update_report + // does not break things. + for (int i = report->lamp_id_start; i < report->lamp_id_end + 1; i = i + 8) { + lamp_multi_update_report.lamp_count = MIN(report->lamp_id_end + 1 - i, 8); + if (i + lamp_multi_update_report.lamp_count == report->lamp_id_end + 1) + lamp_multi_update_report.lamp_update_flags |= + LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE; + + for (int j = 0; j < lamp_multi_update_report.lamp_count; ++j) { + lamp_multi_update_report.lamp_id[j] = i + j; + lamp_multi_update_report.update_channels[j].red = + report->red_update_channel; + lamp_multi_update_report.update_channels[j].green = + report->green_update_channel; + lamp_multi_update_report.update_channels[j].blue = + report->blue_update_channel; + lamp_multi_update_report.update_channels[j].intensity = + report->intensity_update_channel; + } + + ret = handle_lamp_multi_update_report(hdev, &lamp_multi_update_report); + if (ret < 0) + return ret; + else if (ret != sizeof(struct lamp_multi_update_report_t)) + return -EIO; + } + + return sizeof(struct lamp_range_update_report_t); +} + + +struct __packed lamp_array_control_report_t { + const uint8_t report_id; + uint8_t autonomous_mode; +}; + +static int handle_lamp_array_control_report(struct hid_device __always_unused *hdev, + struct lamp_array_control_report_t __always_unused *rep) +{ + // The keyboard firmware doesn't have any built in effects or controls + // so this is a NOOP. + // According to the HID Documentation (HID Usage Tables v1.5) this + // function is optional and can be removed from the HID Report + // Descriptor, but it should first be confirmed that userspace respects + // this possibility too. The Microsoft MacroPad reference implementation + // (https://github.com/microsoft/RP2040MacropadHidSample 1d6c3ad) + // already deviates from the spec at another point, see + // handle_lamp_*_update_report. + + return sizeof(struct lamp_array_control_report_t); +} + + +static int ll_raw_request(struct hid_device *hdev, unsigned char reportnum, __u8 *buf, size_t len, + unsigned char rtype, int reqtype) +{ + int ret; + + ret = -EINVAL; + if (rtype == HID_FEATURE_REPORT) { + if (reqtype == HID_REQ_GET_REPORT) { + if (reportnum == LAMP_ARRAY_ATTRIBUTES_REPORT_ID + && len == sizeof(struct lamp_array_attributes_report_t)) + ret = handle_lamp_array_attributes_report( + hdev, (struct lamp_array_attributes_report_t *)buf); + else if (reportnum == LAMP_ATTRIBUTES_RESPONSE_REPORT_ID + && len == sizeof(struct lamp_attributes_response_report_t)) + ret = handle_lamp_attributes_response_report( + hdev, (struct lamp_attributes_response_report_t *)buf); + } else if (reqtype == HID_REQ_SET_REPORT) { + if (reportnum == LAMP_ATTRIBUTES_REQUEST_REPORT_ID + && len == sizeof(struct lamp_attributes_request_report_t)) + ret = handle_lamp_attributes_request_report( + hdev, (struct lamp_attributes_request_report_t *)buf); + else if (reportnum == LAMP_MULTI_UPDATE_REPORT_ID + && len == sizeof(struct lamp_multi_update_report_t)) + ret = handle_lamp_multi_update_report( + hdev, (struct lamp_multi_update_report_t *)buf); + else if (reportnum == LAMP_RANGE_UPDATE_REPORT_ID + && len == sizeof(struct lamp_range_update_report_t)) + ret = handle_lamp_range_update_report( + hdev, (struct lamp_range_update_report_t *)buf); + else if (reportnum == LAMP_ARRAY_CONTROL_REPORT_ID + && len == sizeof(struct lamp_array_control_report_t)) + ret = handle_lamp_array_control_report( + hdev, (struct lamp_array_control_report_t *)buf); + } + } + + return ret; +} + +static const struct hid_ll_driver ll_driver = { + .start = &ll_start, + .stop = &ll_stop, + .open = &ll_open, + .close = &ll_close, + .parse = &ll_parse, + .raw_request = &ll_raw_request, +}; + +int tuxedo_nb04_virtual_lamp_array_add_device(struct wmi_device *wdev, struct hid_device **hdev_out) +{ + struct hid_device *hdev; + int ret; + + pr_debug("Adding TUXEDO NB04 Virtual LampArray device.\n"); + + hdev = hid_allocate_device(); + if (IS_ERR(hdev)) + return PTR_ERR(hdev); + *hdev_out = hdev; + + strscpy(hdev->name, "TUXEDO NB04 RGB Lighting", sizeof(hdev->name)); + + hdev->ll_driver = &ll_driver; + hdev->bus = BUS_VIRTUAL; + hdev->vendor = 0x21ba; + hdev->product = 0x0400; + hdev->dev.parent = &wdev->dev; + + ret = hid_add_device(hdev); + if (ret) + hid_destroy_device(hdev); + return ret; +} +EXPORT_SYMBOL(tuxedo_nb04_virtual_lamp_array_add_device); diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h new file mode 100644 index 0000000000000..fdc2a01d95c24 --- /dev/null +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This code gives the built in RGB lighting of the TUXEDO NB04 devices a + * standardised interface, namely HID LampArray. + * + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com + */ + +#ifndef TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H +#define TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H + +#include <linux/wmi.h> +#include <linux/hid.h> + +int tuxedo_nb04_virtual_lamp_array_add_device(struct wmi_device *wdev, + struct hid_device **hdev_out); + +#endif diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c new file mode 100644 index 0000000000000..a61b59d225f9f --- /dev/null +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This code gives functions to avoid code duplication while interacting with + * the TUXEDO NB04 wmi interfaces. + * + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "tuxedo_nb04_wmi_ab_init.h" + +#include "tuxedo_nb04_wmi_util.h" + +static int __wmi_method_acpi_object_out(struct wmi_device *wdev, uint32_t wmi_method_id, + uint8_t *in, acpi_size in_len, union acpi_object **out) +{ + struct acpi_buffer acpi_buffer_in = { in_len, in }; + struct acpi_buffer acpi_buffer_out = { ACPI_ALLOCATE_BUFFER, NULL }; + + pr_debug("Evaluate WMI method: %u in:\n", wmi_method_id); + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, in, in_len); + + acpi_status status = wmidev_evaluate_method(wdev, 0, wmi_method_id, &acpi_buffer_in, + &acpi_buffer_out); + if (ACPI_FAILURE(status)) { + pr_err("Failed to evaluate WMI method.\n"); + return -EIO; + } + if (!acpi_buffer_out.pointer) { + pr_err("Unexpected empty out buffer.\n"); + return -ENODATA; + } + + *out = acpi_buffer_out.pointer; + + return 0; +} + +static int __wmi_method_buffer_out(struct wmi_device *wdev, uint32_t wmi_method_id, uint8_t *in, + acpi_size in_len, uint8_t *out, acpi_size out_len) +{ + int ret; + union acpi_object *acpi_object_out = NULL; + + ret = __wmi_method_acpi_object_out(wdev, wmi_method_id, in, in_len, &acpi_object_out); + if (ret) + return ret; + + if (acpi_object_out->type != ACPI_TYPE_BUFFER) { + pr_err("Unexpected out buffer type. Expected: %u Got: %u\n", ACPI_TYPE_BUFFER, + acpi_object_out->type); + kfree(acpi_object_out); + return -EIO; + } + if (acpi_object_out->buffer.length < out_len) { + pr_err("Unexpected out buffer length.\n"); + kfree(acpi_object_out); + return -EIO; + } + + memcpy(out, acpi_object_out->buffer.pointer, out_len); + kfree(acpi_object_out); + + return ret; +} + +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, + enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, + union tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, + union tuxedo_nb04_wmi_8_b_in_80_b_out_output *output) +{ + return __wmi_method_buffer_out(wdev, method, input->raw, 8, output->raw, 80); +} + +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, + enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, + union tuxedo_nb04_wmi_496_b_in_80_b_out_output *output) +{ + return __wmi_method_buffer_out(wdev, method, input->raw, 496, output->raw, 80); +} diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h new file mode 100644 index 0000000000000..2765cbe9fcfef --- /dev/null +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This code gives functions to avoid code duplication while interacting with + * the TUXEDO NB04 wmi interfaces. + * + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com + */ + +#ifndef TUXEDO_NB04_WMI_UTIL_H +#define TUXEDO_NB04_WMI_UTIL_H + +#include <linux/wmi.h> + +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_TOUCHPAD 1 +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_KEYBOARD 2 +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_APP_PAGES 3 + +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_NONE 0 +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_PER_KEY 1 +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_FOUR_ZONE 2 +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_WHITE_ONLY 3 + +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII 0 +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO 1 + +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_RED 1 +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_GREEN 2 +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_YELLOW 3 +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_BLUE 4 +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_PURPLE 5 +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_INDIGO 6 +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_WHITE 7 + +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_DASHBOARD BIT(0) +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_SYSTEMINFOS BIT(1) +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_KBL BIT(2) +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_HOTKEYS BIT(3) + + +union tuxedo_nb04_wmi_8_b_in_80_b_out_input { + uint8_t raw[8]; + struct __packed { + uint8_t device_type; + uint8_t reserved_0[7]; + } get_device_status_input; +}; + +union tuxedo_nb04_wmi_8_b_in_80_b_out_output { + uint8_t raw[80]; + struct __packed { + uint16_t return_status; + uint8_t device_enabled; + uint8_t kbl_type; + uint8_t kbl_side_bar_supported; + uint8_t keyboard_physical_layout; + uint8_t app_pages; + uint8_t per_key_kbl_default_color; + uint8_t four_zone_kbl_default_color_1; + uint8_t four_zone_kbl_default_color_2; + uint8_t four_zone_kbl_default_color_3; + uint8_t four_zone_kbl_default_color_4; + uint8_t light_bar_kbl_default_color; + uint8_t reserved_0[1]; + uint16_t dedicated_gpu_id; + uint8_t reserved_1[64]; + } get_device_status_output; +}; + +enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods { + WMI_AB_GET_DEVICE_STATUS = 2, +}; + + +#define WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX 120 + +union tuxedo_nb04_wmi_496_b_in_80_b_out_input { + uint8_t raw[496]; + struct __packed { + uint8_t reserved_0[15]; + uint8_t lighting_setting_count; + struct { + uint8_t key_id; + uint8_t red; + uint8_t green; + uint8_t blue; + } lighting_settings[WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX]; + } kbl_set_multiple_keys_input; +}; + +union tuxedo_nb04_wmi_496_b_in_80_b_out_output { + uint8_t raw[80]; + struct __packed { + uint8_t return_value; + uint8_t reserved_0[79]; + } kbl_set_multiple_keys_output; +}; + +enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods { + WMI_AB_KBL_SET_MULTIPLE_KEYS = 6, +}; + + +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, + enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, + union tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, + union tuxedo_nb04_wmi_8_b_in_80_b_out_output *output); +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, + enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, + union tuxedo_nb04_wmi_496_b_in_80_b_out_output *output); + +#endif -- 2.34.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-01 18:06 ` [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices Werner Sembach @ 2024-10-02 9:52 ` Ilpo Järvinen 2024-10-02 9:55 ` Pavel Machek 2024-10-02 14:53 ` Werner Sembach 0 siblings, 2 replies; 11+ messages in thread From: Ilpo Järvinen @ 2024-10-02 9:52 UTC (permalink / raw) To: Werner Sembach Cc: Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, pavel, cs, platform-driver-x86 On Tue, 1 Oct 2024, Werner Sembach wrote: > The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a per-key > controllable RGB keyboard backlight. The firmware API for it is implemented > via WMI. > > To make the backlight userspace configurable this driver emulates a > LampArray HID device and translates the input from hidraw to the > corresponding WMI calls. This is a new approach as the leds subsystem lacks > a suitable UAPI for per-key keyboard backlights, and like this no new UAPI > needs to be established. > > v2: Integrated Armins feedback and fixed kernel test robot warnings. > v3: Fixed borked subject line of v2. > v4: Remove unrequired WMI mutex. > Move device checking from probe to init. > Fix device checking working exactly reverse as it should. > Fix null pointer dereference because, hdev->driver_data != hdev->dev.driver_data. > > Co-developed-by: Christoffer Sandberg <cs@tuxedo.de> > Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> > Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> > Link: https://lore.kernel.org/all/1fb08a74-62c7-4d0c-ba5d-648e23082dcb@tuxedocomputers.com/ > --- > MAINTAINERS | 6 + > drivers/platform/x86/Kconfig | 2 + > drivers/platform/x86/Makefile | 3 + > drivers/platform/x86/tuxedo/Kbuild | 9 + > drivers/platform/x86/tuxedo/Kconfig | 14 + > .../x86/tuxedo/tuxedo_nb04_wmi_ab_init.c | 99 +++ > .../x86/tuxedo/tuxedo_nb04_wmi_ab_init.h | 19 + > .../tuxedo_nb04_wmi_ab_virtual_lamp_array.c | 735 ++++++++++++++++++ > .../tuxedo_nb04_wmi_ab_virtual_lamp_array.h | 18 + > .../x86/tuxedo/tuxedo_nb04_wmi_util.c | 82 ++ > .../x86/tuxedo/tuxedo_nb04_wmi_util.h | 112 +++ > 11 files changed, 1099 insertions(+) > create mode 100644 drivers/platform/x86/tuxedo/Kbuild > create mode 100644 drivers/platform/x86/tuxedo/Kconfig > create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c > create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h > create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c > create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h > create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c > create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index cc40a9d9b8cd1..3385ad51af194 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -23358,6 +23358,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git turbostat > F: tools/power/x86/turbostat/ > F: tools/testing/selftests/turbostat/ > > +TUXEDO DRIVERS > +M: Werner Sembach <wse@tuxedocomputers.com> > +L: platform-driver-x86@vger.kernel.org > +S: Supported > +F: drivers/platform/x86/tuxedo/ > + > TW5864 VIDEO4LINUX DRIVER > M: Bluecherry Maintainers <maintainers@bluecherrydvr.com> > M: Andrey Utkin <andrey.utkin@corp.bluecherry.net> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index ddfccc226751f..c7cffb222adac 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -1196,3 +1196,5 @@ config P2SB > The main purpose of this library is to unhide P2SB device in case > firmware kept it hidden on some platforms in order to access devices > behind it. > + > +source "drivers/platform/x86/tuxedo/Kconfig" > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile > index e1b1429470674..1562dcd7ad9a5 100644 > --- a/drivers/platform/x86/Makefile > +++ b/drivers/platform/x86/Makefile > @@ -153,3 +153,6 @@ obj-$(CONFIG_WINMATE_FM07_KEYS) += winmate-fm07-keys.o > > # SEL > obj-$(CONFIG_SEL3350_PLATFORM) += sel3350-platform.o > + > +# TUXEDO > +obj-y += tuxedo/ > diff --git a/drivers/platform/x86/tuxedo/Kbuild b/drivers/platform/x86/tuxedo/Kbuild > new file mode 100644 > index 0000000000000..5a3506ab98131 > --- /dev/null > +++ b/drivers/platform/x86/tuxedo/Kbuild > @@ -0,0 +1,9 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# > +# TUXEDO X86 Platform Specific Drivers > +# > + > +tuxedo_nb04_wmi_ab-y := tuxedo_nb04_wmi_ab_init.o > +tuxedo_nb04_wmi_ab-y += tuxedo_nb04_wmi_util.o > +tuxedo_nb04_wmi_ab-y += tuxedo_nb04_wmi_ab_virtual_lamp_array.o > +obj-$(CONFIG_TUXEDO_NB04_WMI_AB) += tuxedo_nb04_wmi_ab.o > diff --git a/drivers/platform/x86/tuxedo/Kconfig b/drivers/platform/x86/tuxedo/Kconfig > new file mode 100644 > index 0000000000000..b1f7c6ceeaae4 > --- /dev/null > +++ b/drivers/platform/x86/tuxedo/Kconfig > @@ -0,0 +1,14 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +# > +# TUXEDO X86 Platform Specific Drivers > +# > + > +menuconfig TUXEDO_NB04_WMI_AB > + tristate "TUXEDO NB04 WMI AB Platform Driver" > + default m > + help > + This driver implements the WMI AB device found on TUXEDO Notebooks > + with board vendor NB04. For the time being only the keyboard backlight > + control is implemented. > + > + When compiled as a module it will be called tuxedo_nb04_wmi_ab. > diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c > new file mode 100644 > index 0000000000000..bd5bca3b15bc7 > --- /dev/null > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c > @@ -0,0 +1,99 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * This driver implements the WMI AB device found on TUXEDO Notebooks with board > + * vendor NB04. > + * > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > + */ > + > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > + > +#include <linux/module.h> > +#include <linux/wmi.h> > +#include <linux/dmi.h> > + > +#include "tuxedo_nb04_wmi_ab_virtual_lamp_array.h" > + > +#include "tuxedo_nb04_wmi_ab_init.h" > + > +static int probe(struct wmi_device *wdev, const void __always_unused *context) > +{ > + struct tuxedo_nb04_wmi_driver_data_t *driver_data; > + int ret; > + > + driver_data = devm_kzalloc(&wdev->dev, sizeof(*driver_data), GFP_KERNEL); > + if (!driver_data) > + return -ENOMEM; > + > + dev_set_drvdata(&wdev->dev, driver_data); > + > + ret = tuxedo_nb04_virtual_lamp_array_add_device(wdev, > + &driver_data->virtual_lamp_array_hdev); > + if (ret) > + return ret; > + > + return 0; > +} > + > +static void remove(struct wmi_device *wdev) > +{ > + struct tuxedo_nb04_wmi_driver_data_t *driver_data = dev_get_drvdata(&wdev->dev); > + > + hid_destroy_device(driver_data->virtual_lamp_array_hdev); > +} > + > +static const struct wmi_device_id tuxedo_nb04_wmi_ab_device_ids[] = { > + { .guid_string = "80C9BAA6-AC48-4538-9234-9F81A55E7C85" }, > + { } > +}; > +MODULE_DEVICE_TABLE(wmi, tuxedo_nb04_wmi_ab_device_ids); > + > +static struct wmi_driver tuxedo_nb04_wmi_ab_driver = { > + .driver = { > + .name = "tuxedo_nb04_wmi_ab", > + .probe_type = PROBE_PREFER_ASYNCHRONOUS, > + }, > + .id_table = tuxedo_nb04_wmi_ab_device_ids, > + .probe = probe, > + .remove = remove, > + .no_singleton = true, > +}; > + > +// We don't know if the WMI API is stable and how unique the GUID is for this ODM. To be on the safe > +// side we therefore only run this driver on tested devices defined by this list. Please limit comment length to 80 chars and since you need multiple lines here anyway, use the usual /* */ multiline comment formatting. > +static const struct dmi_system_id tested_devices_dmi_table[] __initconst = { > + { > + // TUXEDO Sirius 16 Gen1 > + .matches = { > + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TUXEDO"), > + DMI_EXACT_MATCH(DMI_BOARD_NAME, "APX958"), > + }, > + }, > + { > + // TUXEDO Sirius 16 Gen2 > + .matches = { > + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TUXEDO"), > + DMI_EXACT_MATCH(DMI_BOARD_NAME, "AHP958"), > + }, > + }, > + { } > +}; > + > +static int __init tuxedo_nb04_wmi_ab_init(void) > +{ > + if (!dmi_check_system(tested_devices_dmi_table)) > + return -ENODEV; > + > + return wmi_driver_register(&tuxedo_nb04_wmi_ab_driver); > +} > +module_init(tuxedo_nb04_wmi_ab_init); > + > +static void __exit tuxedo_nb04_wmi_ab_exit(void) > +{ > + return wmi_driver_unregister(&tuxedo_nb04_wmi_ab_driver); > +} > +module_exit(tuxedo_nb04_wmi_ab_exit); > + > +MODULE_DESCRIPTION("Virtual HID LampArray interface for TUXEDO NB04 devices"); > +MODULE_AUTHOR("Werner Sembach <wse@tuxedocomputers.com>"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h > new file mode 100644 > index 0000000000000..3306e3d28bcab > --- /dev/null > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h > @@ -0,0 +1,19 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * This driver implements the WMI AB device found on TUXEDO Notebooks with board > + * vendor NB04. > + * > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > + */ > + > +#ifndef TUXEDO_NB04_WMI_AB_INIT_H > +#define TUXEDO_NB04_WMI_AB_INIT_H > + > +#include <linux/mutex.h> > +#include <linux/hid.h> > + > +struct tuxedo_nb04_wmi_driver_data_t { > + struct hid_device *virtual_lamp_array_hdev; > +}; > + > +#endif > diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c > new file mode 100644 > index 0000000000000..906eb59c5cfd2 > --- /dev/null > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c > @@ -0,0 +1,735 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * This code gives the built in RGB lighting of the TUXEDO NB04 devices a > + * standardised interface, namely HID LampArray. > + * > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > + */ > + > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Please add all the includes here for the things you use below (in alphabetical order). > +#include "tuxedo_nb04_wmi_util.h" > + > +#include "tuxedo_nb04_wmi_ab_virtual_lamp_array.h" > + > +enum report_ids { > + LAMP_ARRAY_ATTRIBUTES_REPORT_ID = 0x01, > + LAMP_ATTRIBUTES_REQUEST_REPORT_ID = 0x02, > + LAMP_ATTRIBUTES_RESPONSE_REPORT_ID = 0x03, > + LAMP_MULTI_UPDATE_REPORT_ID = 0x04, > + LAMP_RANGE_UPDATE_REPORT_ID = 0x05, > + LAMP_ARRAY_CONTROL_REPORT_ID = 0x06, > +}; > + > +static const uint8_t sirius_16_ansii_kbl_mapping[] = { u8 for kernel internal things. > + 0x29, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, > + 0x43, 0x44, 0x45, 0xf1, 0x46, 0x4c, 0x4a, 0x4d, 0x4b, 0x4e, > + 0x35, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, > + 0x27, 0x2d, 0x2e, 0x2a, 0x53, 0x55, 0x54, 0x56, > + 0x2b, 0x14, 0x1a, 0x08, 0x15, 0x17, 0x1c, 0x18, 0x0c, 0x12, > + 0x13, 0x2f, 0x30, 0x31, 0x5f, 0x60, 0x61, > + 0x39, 0x04, 0x16, 0x07, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x0f, > + 0x33, 0x34, 0x28, 0x5c, 0x5d, 0x5e, 0x57, > + 0xe1, 0x1d, 0x1b, 0x06, 0x19, 0x05, 0x11, 0x10, 0x36, 0x37, > + 0x38, 0xe5, 0x52, 0x59, 0x5a, 0x5b, > + 0xe0, 0xfe, 0xe3, 0xe2, 0x2c, 0xe6, 0x65, 0xe4, 0x50, 0x51, > + 0x4f, 0x62, 0x63, 0x58 Why are these aligned in the odd way? > +}; > + > +static const uint32_t sirius_16_ansii_kbl_mapping_pos_x[] = { u32 > + 25000, 41700, 58400, 75100, 91800, 108500, 125200, 141900, 158600, 175300, > + 192000, 208700, 225400, 242100, 258800, 275500, 294500, 311200, 327900, 344600, > + 24500, 42500, 61000, 79500, 98000, 116500, 135000, 153500, 172000, 190500, > + 209000, 227500, 246000, 269500, 294500, 311200, 327900, 344600, > + 31000, 51500, 70000, 88500, 107000, 125500, 144000, 162500, 181000, 199500, > + 218000, 236500, 255000, 273500, 294500, 311200, 327900, > + 33000, 57000, 75500, 94000, 112500, 131000, 149500, 168000, 186500, 205000, > + 223500, 242000, 267500, 294500, 311200, 327900, 344600, > + 37000, 66000, 84500, 103000, 121500, 140000, 158500, 177000, 195500, 214000, > + 232500, 251500, 273500, 294500, 311200, 327900, > + 28000, 47500, 66000, 84500, 140000, 195500, 214000, 234000, 255000, 273500, > + 292000, 311200, 327900, 344600 > +}; > + > +static const uint32_t sirius_16_ansii_kbl_mapping_pos_y[] = { > + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, > + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, > + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, > + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, > + 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, > + 85500, 85500, 85500, 85500, 85500, 85500, 85500, > + 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, > + 103500, 103500, 103500, 103500, 103500, 103500, 94500, > + 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, > + 121500, 121500, 129000, 121500, 121500, 121500, > + 139500, 139500, 139500, 139500, 139500, 139500, 139500, 139500, 147000, 147000, > + 147000, 139500, 139500, 130500 > +}; > + > +static const uint32_t sirius_16_ansii_kbl_mapping_pos_z[] = { > + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, > + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, > + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, > + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, > + 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, > + 5500, 5500, 5500, 5500, 5500, 5500, 5500, > + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, > + 5750, 5750, 5750, 5750, 5750, 5750, 5625, > + 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, > + 6000, 6000, 6125, 6000, 6000, 6000, > + 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6375, 6375, > + 6375, 6250, 6250, 6125 > +}; > + > +static const uint8_t sirius_16_iso_kbl_mapping[] = { > + 0x29, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, > + 0x43, 0x44, 0x45, 0xf1, 0x46, 0x4c, 0x4a, 0x4d, 0x4b, 0x4e, > + 0x35, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, > + 0x27, 0x2d, 0x2e, 0x2a, 0x53, 0x55, 0x54, 0x56, > + 0x2b, 0x14, 0x1a, 0x08, 0x15, 0x17, 0x1c, 0x18, 0x0c, 0x12, > + 0x13, 0x2f, 0x30, 0x5f, 0x60, 0x61, > + 0x39, 0x04, 0x16, 0x07, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x0f, > + 0x33, 0x34, 0x32, 0x28, 0x5c, 0x5d, 0x5e, 0x57, > + 0xe1, 0x64, 0x1d, 0x1b, 0x06, 0x19, 0x05, 0x11, 0x10, 0x36, > + 0x37, 0x38, 0xe5, 0x52, 0x59, 0x5a, 0x5b, > + 0xe0, 0xfe, 0xe3, 0xe2, 0x2c, 0xe6, 0x65, 0xe4, 0x50, 0x51, > + 0x4f, 0x62, 0x63, 0x58 > +}; > + > +static const uint32_t sirius_16_iso_kbl_mapping_pos_x[] = { > + 25000, 41700, 58400, 75100, 91800, 108500, 125200, 141900, 158600, 175300, > + 192000, 208700, 225400, 242100, 258800, 275500, 294500, 311200, 327900, 344600, > + 24500, 42500, 61000, 79500, 98000, 116500, 135000, 153500, 172000, 190500, > + 209000, 227500, 246000, 269500, 294500, 311200, 327900, 344600, > + 31000, 51500, 70000, 88500, 107000, 125500, 144000, 162500, 181000, 199500, > + 218000, 234500, 251000, 294500, 311200, 327900, > + 33000, 57000, 75500, 94000, 112500, 131000, 149500, 168000, 186500, 205000, > + 223500, 240000, 256500, 271500, 294500, 311200, 327900, 344600, > + 28000, 47500, 66000, 84500, 103000, 121500, 140000, 158500, 177000, 195500, > + 214000, 232500, 251500, 273500, 294500, 311200, 327900, > + 28000, 47500, 66000, 84500, 140000, 195500, 214000, 234000, 255000, 273500, > + 292000, 311200, 327900, 344600 > +}; > + > +static const uint32_t sirius_16_iso_kbl_mapping_pos_y[] = { > + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, > + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, > + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, > + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, > + 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, > + 85500, 85500, 85500, 85500, 85500, 85500, > + 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, > + 103500, 103500, 103500, 94500, 103500, 103500, 103500, 94500, > + 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, > + 121500, 121500, 121500, 129000, 121500, 121500, 121500, > + 139500, 139500, 139500, 139500, 139500, 139500, 139500, 139500, 147000, 147000, > + 147000, 139500, 139500, 130500 > +}; > + > +static const uint32_t sirius_16_iso_kbl_mapping_pos_z[] = { > + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, > + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, > + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, > + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, > + 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, > + 5500, 5500, 5500, 5500, 5500, 5500, > + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, > + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5625, > + 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, > + 6000, 6000, 6000, 6125, 6000, 6000, 6000, > + 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6375, 6375, > + 6375, 6250, 6250, 6125 > +}; > + > +struct driver_data_t { > + uint8_t keyboard_type; > + uint8_t lamp_count; > + uint8_t next_lamp_id; > + union tuxedo_nb04_wmi_496_b_in_80_b_out_input next_kbl_set_multiple_keys_input; > +}; > + > + > +static int ll_start(struct hid_device *hdev) > +{ > + struct driver_data_t *driver_data; > + struct wmi_device *wdev = to_wmi_device(hdev->dev.parent); > + int ret; > + union tuxedo_nb04_wmi_8_b_in_80_b_out_input input; > + union tuxedo_nb04_wmi_8_b_in_80_b_out_output output; Reverse xmas-tree order. > + > + driver_data = devm_kzalloc(&hdev->dev, sizeof(*driver_data), GFP_KERNEL); > + if (!driver_data) > + return -ENOMEM; > + > + input.get_device_status_input.device_type = WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_KEYBOARD; > + ret = tuxedo_nb04_wmi_8_b_in_80_b_out(wdev, WMI_AB_GET_DEVICE_STATUS, &input, &output); > + if (ret) > + return ret; > + > + driver_data->keyboard_type = output.get_device_status_output.keyboard_physical_layout; > + driver_data->lamp_count = sizeof(sirius_16_ansii_kbl_mapping); > + driver_data->next_lamp_id = 0; > + > + hdev->driver_data = driver_data; > + > + return ret; > +} > + > + > +static void ll_stop(struct hid_device __always_unused *hdev) > +{ > +} > + > + > +static int ll_open(struct hid_device __always_unused *hdev) > +{ > + return 0; > +} > + > + > +static void ll_close(struct hid_device __always_unused *hdev) > +{ > +} > + > + > +static uint8_t report_descriptor[327] = { Use u8 for things internal to kernel. > + 0x05, 0x59, // Usage Page (Lighting and Illumination) > + 0x09, 0x01, // Usage (Lamp Array) > + 0xa1, 0x01, // Collection (Application) > + 0x85, LAMP_ARRAY_ATTRIBUTES_REPORT_ID, // Report ID (1) > + 0x09, 0x02, // Usage (Lamp Array Attributes Report) > + 0xa1, 0x02, // Collection (Logical) > + 0x09, 0x03, // Usage (Lamp Count) > + 0x15, 0x00, // Logical Minimum (0) > + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) > + 0x75, 0x10, // Report Size (16) > + 0x95, 0x01, // Report Count (1) > + 0xb1, 0x03, // Feature (Cnst,Var,Abs) > + 0x09, 0x04, // Usage (Bounding Box Width In Micrometers) > + 0x09, 0x05, // Usage (Bounding Box Height In Micrometers) > + 0x09, 0x06, // Usage (Bounding Box Depth In Micrometers) > + 0x09, 0x07, // Usage (Lamp Array Kind) > + 0x09, 0x08, // Usage (Min Update Interval In Microseconds) > + 0x15, 0x00, // Logical Minimum (0) > + 0x27, 0xff, 0xff, 0xff, 0x7f, // Logical Maximum (2147483647) > + 0x75, 0x20, // Report Size (32) > + 0x95, 0x05, // Report Count (5) > + 0xb1, 0x03, // Feature (Cnst,Var,Abs) > + 0xc0, // End Collection > + 0x85, LAMP_ATTRIBUTES_REQUEST_REPORT_ID, // Report ID (2) > + 0x09, 0x20, // Usage (Lamp Attributes Request Report) > + 0xa1, 0x02, // Collection (Logical) > + 0x09, 0x21, // Usage (Lamp Id) > + 0x15, 0x00, // Logical Minimum (0) > + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) > + 0x75, 0x10, // Report Size (16) > + 0x95, 0x01, // Report Count (1) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0xc0, // End Collection > + 0x85, LAMP_ATTRIBUTES_RESPONSE_REPORT_ID, // Report ID (3) > + 0x09, 0x22, // Usage (Lamp Attributes Response Report) > + 0xa1, 0x02, // Collection (Logical) > + 0x09, 0x21, // Usage (Lamp Id) > + 0x15, 0x00, // Logical Minimum (0) > + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) > + 0x75, 0x10, // Report Size (16) > + 0x95, 0x01, // Report Count (1) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0x09, 0x23, // Usage (Position X In Micrometers) > + 0x09, 0x24, // Usage (Position Y In Micrometers) > + 0x09, 0x25, // Usage (Position Z In Micrometers) > + 0x09, 0x27, // Usage (Update Latency In Microseconds) > + 0x09, 0x26, // Usage (Lamp Purposes) > + 0x15, 0x00, // Logical Minimum (0) > + 0x27, 0xff, 0xff, 0xff, 0x7f, // Logical Maximum (2147483647) > + 0x75, 0x20, // Report Size (32) > + 0x95, 0x05, // Report Count (5) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0x09, 0x28, // Usage (Red Level Count) > + 0x09, 0x29, // Usage (Green Level Count) > + 0x09, 0x2a, // Usage (Blue Level Count) > + 0x09, 0x2b, // Usage (Intensity Level Count) > + 0x09, 0x2c, // Usage (Is Programmable) > + 0x09, 0x2d, // Usage (Input Binding) > + 0x15, 0x00, // Logical Minimum (0) > + 0x26, 0xff, 0x00, // Logical Maximum (255) > + 0x75, 0x08, // Report Size (8) > + 0x95, 0x06, // Report Count (6) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0xc0, // End Collection > + 0x85, LAMP_MULTI_UPDATE_REPORT_ID, // Report ID (4) > + 0x09, 0x50, // Usage (Lamp Multi Update Report) > + 0xa1, 0x02, // Collection (Logical) > + 0x09, 0x03, // Usage (Lamp Count) > + 0x09, 0x55, // Usage (Lamp Update Flags) > + 0x15, 0x00, // Logical Minimum (0) > + 0x25, 0x08, // Logical Maximum (8) > + 0x75, 0x08, // Report Size (8) > + 0x95, 0x02, // Report Count (2) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0x09, 0x21, // Usage (Lamp Id) > + 0x15, 0x00, // Logical Minimum (0) > + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) > + 0x75, 0x10, // Report Size (16) > + 0x95, 0x08, // Report Count (8) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x15, 0x00, // Logical Minimum (0) > + 0x26, 0xff, 0x00, // Logical Maximum (255) > + 0x75, 0x08, // Report Size (8) > + 0x95, 0x20, // Report Count (32) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0xc0, // End Collection > + 0x85, LAMP_RANGE_UPDATE_REPORT_ID, // Report ID (5) > + 0x09, 0x60, // Usage (Lamp Range Update Report) > + 0xa1, 0x02, // Collection (Logical) > + 0x09, 0x55, // Usage (Lamp Update Flags) > + 0x15, 0x00, // Logical Minimum (0) > + 0x25, 0x08, // Logical Maximum (8) > + 0x75, 0x08, // Report Size (8) > + 0x95, 0x01, // Report Count (1) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0x09, 0x61, // Usage (Lamp Id Start) > + 0x09, 0x62, // Usage (Lamp Id End) > + 0x15, 0x00, // Logical Minimum (0) > + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) > + 0x75, 0x10, // Report Size (16) > + 0x95, 0x02, // Report Count (2) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0x09, 0x51, // Usage (Red Update Channel) > + 0x09, 0x52, // Usage (Green Update Channel) > + 0x09, 0x53, // Usage (Blue Update Channel) > + 0x09, 0x54, // Usage (Intensity Update Channel) > + 0x15, 0x00, // Logical Minimum (0) > + 0x26, 0xff, 0x00, // Logical Maximum (255) > + 0x75, 0x08, // Report Size (8) > + 0x95, 0x04, // Report Count (4) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0xc0, // End Collection > + 0x85, LAMP_ARRAY_CONTROL_REPORT_ID, // Report ID (6) > + 0x09, 0x70, // Usage (Lamp Array Control Report) > + 0xa1, 0x02, // Collection (Logical) > + 0x09, 0x71, // Usage (Autonomous Mode) > + 0x15, 0x00, // Logical Minimum (0) > + 0x25, 0x01, // Logical Maximum (1) > + 0x75, 0x08, // Report Size (8) > + 0x95, 0x01, // Report Count (1) > + 0xb1, 0x02, // Feature (Data,Var,Abs) > + 0xc0, // End Collection > + 0xc0 // End Collection > +}; > + > +static int ll_parse(struct hid_device *hdev) > +{ > + return hid_parse_report(hdev, report_descriptor, sizeof(report_descriptor)); > +} > + > + > +struct __packed lamp_array_attributes_report_t { > + const uint8_t report_id; > + uint16_t lamp_count; > + uint32_t bounding_box_width_in_micrometers; > + uint32_t bounding_box_height_in_micrometers; > + uint32_t bounding_box_depth_in_micrometers; > + uint32_t lamp_array_kind; > + uint32_t min_update_interval_in_microseconds; Use uXX types. > +}; > + > +static int handle_lamp_array_attributes_report(struct hid_device *hdev, > + struct lamp_array_attributes_report_t *rep) > +{ > + struct driver_data_t *driver_data = hdev->driver_data; > + > + rep->lamp_count = driver_data->lamp_count; > + rep->bounding_box_width_in_micrometers = 368000; > + rep->bounding_box_height_in_micrometers = 266000; > + rep->bounding_box_depth_in_micrometers = 30000; > + // LampArrayKindKeyboard, see "26.2.1 LampArrayKind Values" of "HID Usage Tables v1.5" Limit length to 80 chars. > + rep->lamp_array_kind = 1; > + // Some guessed value for interval microseconds > + rep->min_update_interval_in_microseconds = 500; > + > + return sizeof(struct lamp_array_attributes_report_t); sizeof(*rep) ? > +} > + > + > +struct __packed lamp_attributes_request_report_t { > + const uint8_t report_id; > + uint16_t lamp_id; > +}; > + > +static int handle_lamp_attributes_request_report(struct hid_device *hdev, > + struct lamp_attributes_request_report_t *rep) > +{ > + struct driver_data_t *driver_data = hdev->driver_data; > + > + if (rep->lamp_id < driver_data->lamp_count) > + driver_data->next_lamp_id = rep->lamp_id; > + else > + driver_data->next_lamp_id = 0; > + > + return sizeof(struct lamp_attributes_request_report_t); sizeof(*rep) ? > +} > + > + > +struct __packed lamp_attributes_response_report_t { > + const uint8_t report_id; > + uint16_t lamp_id; > + uint32_t position_x_in_micrometers; > + uint32_t position_y_in_micrometers; > + uint32_t position_z_in_micrometers; > + uint32_t update_latency_in_microseconds; > + uint32_t lamp_purpose; > + uint8_t red_level_count; > + uint8_t green_level_count; > + uint8_t blue_level_count; > + uint8_t intensity_level_count; > + uint8_t is_programmable; > + uint8_t input_binding; uXX types. > +}; > + > +static int handle_lamp_attributes_response_report(struct hid_device *hdev, > + struct lamp_attributes_response_report_t *rep) > +{ > + struct driver_data_t *driver_data = hdev->driver_data; > + uint16_t lamp_id = driver_data->next_lamp_id; > + const uint8_t *kbl_mapping; > + const uint32_t *kbl_mapping_pos_x, *kbl_mapping_pos_y, *kbl_mapping_pos_z; uXX types. > + > + rep->lamp_id = lamp_id; > + // Some guessed value for latency microseconds > + rep->update_latency_in_microseconds = 100; > + // LampPurposeControl, see "26.3.1 LampPurposes Flags" of "HID Usage Tables v1.5" Extra space. Limit to 80 chars. > + rep->lamp_purpose = 1; > + rep->red_level_count = 0xff; > + rep->green_level_count = 0xff; > + rep->blue_level_count = 0xff; > + rep->intensity_level_count = 0xff; > + rep->is_programmable = 1; > + > + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) { > + kbl_mapping = &sirius_16_ansii_kbl_mapping[0]; > + kbl_mapping_pos_x = &sirius_16_ansii_kbl_mapping_pos_x[0]; > + kbl_mapping_pos_y = &sirius_16_ansii_kbl_mapping_pos_y[0]; > + kbl_mapping_pos_z = &sirius_16_ansii_kbl_mapping_pos_z[0]; > + } else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) { > + kbl_mapping = &sirius_16_iso_kbl_mapping[0]; > + kbl_mapping_pos_x = &sirius_16_iso_kbl_mapping_pos_x[0]; > + kbl_mapping_pos_y = &sirius_16_iso_kbl_mapping_pos_y[0]; > + kbl_mapping_pos_z = &sirius_16_iso_kbl_mapping_pos_z[0]; > + } else > + return -EINVAL; > + > + if (kbl_mapping[lamp_id] <= 0xe8) > + rep->input_binding = kbl_mapping[lamp_id]; > + else > + // Everything bigger is reserved/undefined, see "10 Keyboard/Keypad Page (0x07)" of > + // "HID Usage Tables v1.5" and should return 0, see "26.8.3 Lamp Attributes" of the > + // same document. Use multiline /**/ comment formatting and limit to 80 chars. > + rep->input_binding = 0; > + rep->position_x_in_micrometers = kbl_mapping_pos_x[lamp_id]; > + rep->position_y_in_micrometers = kbl_mapping_pos_y[lamp_id]; > + rep->position_z_in_micrometers = kbl_mapping_pos_z[lamp_id]; > + > + driver_data->next_lamp_id = (driver_data->next_lamp_id + 1) % driver_data->lamp_count; > + > + return sizeof(struct lamp_attributes_response_report_t); sizeof(*rep) ? > +} > + > + > +#define LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE BIT(0) > + > +struct __packed lamp_multi_update_report_t { > + const uint8_t report_id; > + uint8_t lamp_count; > + uint8_t lamp_update_flags; > + uint16_t lamp_id[8]; > + struct { > + uint8_t red; > + uint8_t green; > + uint8_t blue; > + uint8_t intensity; > + } update_channels[8]; uXX types. > +}; > + > +static int handle_lamp_multi_update_report(struct hid_device *hdev, > + struct lamp_multi_update_report_t *rep) > +{ > + struct driver_data_t *driver_data = hdev->driver_data; > + struct wmi_device *wdev = to_wmi_device(hdev->dev.parent); > + int ret; > + uint8_t lamp_count = 0, key_id, key_id_j; > + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *next = > + &driver_data->next_kbl_set_multiple_keys_input; > + union tuxedo_nb04_wmi_496_b_in_80_b_out_output output; Reverse xmas-tree order (to the extent viable). > + > + // Catching missformated lamp_multi_update_report and fail silently according to > + // "HID Usage Tables v1.5" > + for (int i = 0; i < rep->lamp_count; ++i) { > + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) > + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); > + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) > + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); > + > + if (rep->lamp_id[i] > lamp_count) { > + pr_debug("Out of bounds lamp_id in lamp_multi_update_report. Skippng whole report!\n"); > + return sizeof(struct lamp_multi_update_report_t); sizeof(*rep)? > + } > + > + for (int j = i + 1; j < rep->lamp_count; ++j) { > + if (rep->lamp_id[i] == rep->lamp_id[j]) { > + pr_debug("Duplicate lamp_id in lamp_multi_update_report. Skippng whole report!\n"); > + return sizeof(struct lamp_multi_update_report_t); > + } > + } > + } > + > + for (int i = 0; i < rep->lamp_count; ++i) { > + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) > + key_id = sirius_16_ansii_kbl_mapping[rep->lamp_id[i]]; > + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) > + key_id = sirius_16_iso_kbl_mapping[rep->lamp_id[i]]; > + > + for (int j = 0; j < WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX; ++j) { > + key_id_j = next->kbl_set_multiple_keys_input.lighting_settings[j].key_id; > + if (key_id_j == 0x00 || key_id_j == key_id) { Reverse condition and use continue to lower the indentation level of the main loop body. > + if (key_id_j == 0x00) > + next->kbl_set_multiple_keys_input.lighting_setting_count = > + j + 1; > + next->kbl_set_multiple_keys_input.lighting_settings[j].key_id = > + key_id; > + // While this driver respects > + // intensity_update_channel according to "HID > + // Usage Tables v1.5" also on RGB leds, the > + // Microsoft MacroPad reference implementation > + // (https://github.com/microsoft/RP2040MacropadHidSample > + // 1d6c3ad) does not and ignores it. If it turns > + // out that Windows writes intensity = 0 for RGB > + // leds instead of intensity = 255, this driver > + // should also irgnore the > + // intensity_update_channel. > + next->kbl_set_multiple_keys_input.lighting_settings[j].red = > + rep->update_channels[i].red > + * rep->update_channels[i].intensity / 0xff; > + next->kbl_set_multiple_keys_input.lighting_settings[j].green = > + rep->update_channels[i].green > + * rep->update_channels[i].intensity / 0xff; > + next->kbl_set_multiple_keys_input.lighting_settings[j].blue = > + rep->update_channels[i].blue > + * rep->update_channels[i].intensity / 0xff; > + > + break; > + } > + } > + } > + > + if (rep->lamp_update_flags & LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE) { > + ret = tuxedo_nb04_wmi_496_b_in_80_b_out(wdev, WMI_AB_KBL_SET_MULTIPLE_KEYS, next, > + &output); > + memset(next, 0, sizeof(union tuxedo_nb04_wmi_496_b_in_80_b_out_input)); > + if (ret) > + return ret; > + } > + > + return sizeof(struct lamp_multi_update_report_t); > +} > + > + > +struct __packed lamp_range_update_report_t { > + const uint8_t report_id; > + uint8_t lamp_update_flags; > + uint16_t lamp_id_start; > + uint16_t lamp_id_end; > + uint8_t red_update_channel; > + uint8_t green_update_channel; > + uint8_t blue_update_channel; > + uint8_t intensity_update_channel; > +}; > + > +static int handle_lamp_range_update_report(struct hid_device *hdev, > + struct lamp_range_update_report_t *report) > +{ > + struct driver_data_t *driver_data = hdev->driver_data; > + int ret; > + uint8_t lamp_count; > + struct lamp_multi_update_report_t lamp_multi_update_report = { > + .report_id = LAMP_MULTI_UPDATE_REPORT_ID > + }; > + > + // Catching missformated lamp_range_update_report and fail silently according to > + // "HID Usage Tables v1.5" > + if (report->lamp_id_start > report->lamp_id_end) { > + pr_debug("lamp_id_start > lamp_id_end in lamp_range_update_report. Skippng whole report!\n"); > + return sizeof(struct lamp_range_update_report_t); > + } > + > + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) > + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); > + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) > + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); > + > + if (report->lamp_id_end > lamp_count - 1) { > + pr_debug("Out of bounds lamp_id_* in lamp_range_update_report. Skippng whole report!\n"); > + return sizeof(struct lamp_range_update_report_t); > + } > + > + // Break handle_lamp_range_update_report call down to multiple > + // handle_lamp_multi_update_report calls to easily ensure that mixing > + // handle_lamp_range_update_report and handle_lamp_multi_update_report > + // does not break things. > + for (int i = report->lamp_id_start; i < report->lamp_id_end + 1; i = i + 8) { > + lamp_multi_update_report.lamp_count = MIN(report->lamp_id_end + 1 - i, 8); > + if (i + lamp_multi_update_report.lamp_count == report->lamp_id_end + 1) > + lamp_multi_update_report.lamp_update_flags |= > + LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE; > + > + for (int j = 0; j < lamp_multi_update_report.lamp_count; ++j) { > + lamp_multi_update_report.lamp_id[j] = i + j; > + lamp_multi_update_report.update_channels[j].red = > + report->red_update_channel; > + lamp_multi_update_report.update_channels[j].green = > + report->green_update_channel; > + lamp_multi_update_report.update_channels[j].blue = > + report->blue_update_channel; > + lamp_multi_update_report.update_channels[j].intensity = > + report->intensity_update_channel; > + } > + > + ret = handle_lamp_multi_update_report(hdev, &lamp_multi_update_report); > + if (ret < 0) > + return ret; > + else if (ret != sizeof(struct lamp_multi_update_report_t)) > + return -EIO; > + } > + > + return sizeof(struct lamp_range_update_report_t); > +} > + > + > +struct __packed lamp_array_control_report_t { > + const uint8_t report_id; > + uint8_t autonomous_mode; > +}; > + > +static int handle_lamp_array_control_report(struct hid_device __always_unused *hdev, > + struct lamp_array_control_report_t __always_unused *rep) > +{ > + // The keyboard firmware doesn't have any built in effects or controls > + // so this is a NOOP. > + // According to the HID Documentation (HID Usage Tables v1.5) this > + // function is optional and can be removed from the HID Report > + // Descriptor, but it should first be confirmed that userspace respects > + // this possibility too. The Microsoft MacroPad reference implementation > + // (https://github.com/microsoft/RP2040MacropadHidSample 1d6c3ad) > + // already deviates from the spec at another point, see > + // handle_lamp_*_update_report. > + > + return sizeof(struct lamp_array_control_report_t); > +} > + > + > +static int ll_raw_request(struct hid_device *hdev, unsigned char reportnum, __u8 *buf, size_t len, > + unsigned char rtype, int reqtype) > +{ > + int ret; > + > + ret = -EINVAL; > + if (rtype == HID_FEATURE_REPORT) { No, reverse the logic in the condition and return -EINVAL explicitly. It lets you lower the indentation level of the normal path. > + if (reqtype == HID_REQ_GET_REPORT) { > + if (reportnum == LAMP_ARRAY_ATTRIBUTES_REPORT_ID > + && len == sizeof(struct lamp_array_attributes_report_t)) > + ret = handle_lamp_array_attributes_report( > + hdev, (struct lamp_array_attributes_report_t *)buf); > + else if (reportnum == LAMP_ATTRIBUTES_RESPONSE_REPORT_ID > + && len == sizeof(struct lamp_attributes_response_report_t)) > + ret = handle_lamp_attributes_response_report( > + hdev, (struct lamp_attributes_response_report_t *)buf); > + } else if (reqtype == HID_REQ_SET_REPORT) { > + if (reportnum == LAMP_ATTRIBUTES_REQUEST_REPORT_ID > + && len == sizeof(struct lamp_attributes_request_report_t)) > + ret = handle_lamp_attributes_request_report( > + hdev, (struct lamp_attributes_request_report_t *)buf); > + else if (reportnum == LAMP_MULTI_UPDATE_REPORT_ID > + && len == sizeof(struct lamp_multi_update_report_t)) > + ret = handle_lamp_multi_update_report( > + hdev, (struct lamp_multi_update_report_t *)buf); > + else if (reportnum == LAMP_RANGE_UPDATE_REPORT_ID > + && len == sizeof(struct lamp_range_update_report_t)) > + ret = handle_lamp_range_update_report( > + hdev, (struct lamp_range_update_report_t *)buf); > + else if (reportnum == LAMP_ARRAY_CONTROL_REPORT_ID > + && len == sizeof(struct lamp_array_control_report_t)) > + ret = handle_lamp_array_control_report( > + hdev, (struct lamp_array_control_report_t *)buf); > + } This is very messy, and should IMHO use switch&case and directly return -EINVAL on every len check inside the case blocks. > + } > + > + return ret; > +} > + > +static const struct hid_ll_driver ll_driver = { > + .start = &ll_start, > + .stop = &ll_stop, > + .open = &ll_open, > + .close = &ll_close, > + .parse = &ll_parse, > + .raw_request = &ll_raw_request, > +}; > + > +int tuxedo_nb04_virtual_lamp_array_add_device(struct wmi_device *wdev, struct hid_device **hdev_out) > +{ > + struct hid_device *hdev; > + int ret; > + > + pr_debug("Adding TUXEDO NB04 Virtual LampArray device.\n"); > + > + hdev = hid_allocate_device(); > + if (IS_ERR(hdev)) > + return PTR_ERR(hdev); > + *hdev_out = hdev; > + > + strscpy(hdev->name, "TUXEDO NB04 RGB Lighting", sizeof(hdev->name)); > + > + hdev->ll_driver = &ll_driver; > + hdev->bus = BUS_VIRTUAL; > + hdev->vendor = 0x21ba; > + hdev->product = 0x0400; > + hdev->dev.parent = &wdev->dev; > + > + ret = hid_add_device(hdev); > + if (ret) > + hid_destroy_device(hdev); > + return ret; > +} > +EXPORT_SYMBOL(tuxedo_nb04_virtual_lamp_array_add_device); > diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h > new file mode 100644 > index 0000000000000..fdc2a01d95c24 > --- /dev/null > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h > @@ -0,0 +1,18 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * This code gives the built in RGB lighting of the TUXEDO NB04 devices a > + * standardised interface, namely HID LampArray. > + * > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > + */ > + > +#ifndef TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H > +#define TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H > + > +#include <linux/wmi.h> > +#include <linux/hid.h> > + > +int tuxedo_nb04_virtual_lamp_array_add_device(struct wmi_device *wdev, > + struct hid_device **hdev_out); > + > +#endif > diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c > new file mode 100644 > index 0000000000000..a61b59d225f9f > --- /dev/null > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c > @@ -0,0 +1,82 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * This code gives functions to avoid code duplication while interacting with > + * the TUXEDO NB04 wmi interfaces. > + * > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com The usual custom is to put <> around email addresses. > + */ > + > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Add all includes for the stuff you use below. > +#include "tuxedo_nb04_wmi_ab_init.h" > + > +#include "tuxedo_nb04_wmi_util.h" > + > +static int __wmi_method_acpi_object_out(struct wmi_device *wdev, uint32_t wmi_method_id, > + uint8_t *in, acpi_size in_len, union acpi_object **out) > +{ > + struct acpi_buffer acpi_buffer_in = { in_len, in }; > + struct acpi_buffer acpi_buffer_out = { ACPI_ALLOCATE_BUFFER, NULL }; > + > + pr_debug("Evaluate WMI method: %u in:\n", wmi_method_id); > + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, in, in_len); > + > + acpi_status status = wmidev_evaluate_method(wdev, 0, wmi_method_id, &acpi_buffer_in, > + &acpi_buffer_out); > + if (ACPI_FAILURE(status)) { > + pr_err("Failed to evaluate WMI method.\n"); You should use dev_err() instead of pr_err(). > + return -EIO; > + } > + if (!acpi_buffer_out.pointer) { > + pr_err("Unexpected empty out buffer.\n"); > + return -ENODATA; > + } > + > + *out = acpi_buffer_out.pointer; > + > + return 0; > +} > + > +static int __wmi_method_buffer_out(struct wmi_device *wdev, uint32_t wmi_method_id, uint8_t *in, > + acpi_size in_len, uint8_t *out, acpi_size out_len) > +{ > + int ret; > + union acpi_object *acpi_object_out = NULL; Reverse xmas tree order. > + > + ret = __wmi_method_acpi_object_out(wdev, wmi_method_id, in, in_len, &acpi_object_out); > + if (ret) > + return ret; > + > + if (acpi_object_out->type != ACPI_TYPE_BUFFER) { > + pr_err("Unexpected out buffer type. Expected: %u Got: %u\n", ACPI_TYPE_BUFFER, > + acpi_object_out->type); > + kfree(acpi_object_out); > + return -EIO; > + } > + if (acpi_object_out->buffer.length < out_len) { > + pr_err("Unexpected out buffer length.\n"); > + kfree(acpi_object_out); > + return -EIO; Duplicated error paths should use goto to handle rollback. > + } > + > + memcpy(out, acpi_object_out->buffer.pointer, out_len); > + kfree(acpi_object_out); > + > + return ret; > +} > + > +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, > + enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, > + union tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, > + union tuxedo_nb04_wmi_8_b_in_80_b_out_output *output) > +{ > + return __wmi_method_buffer_out(wdev, method, input->raw, 8, output->raw, 80); > +} > + > +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, > + enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, > + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, > + union tuxedo_nb04_wmi_496_b_in_80_b_out_output *output) > +{ > + return __wmi_method_buffer_out(wdev, method, input->raw, 496, output->raw, 80); > +} > diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h > new file mode 100644 > index 0000000000000..2765cbe9fcfef > --- /dev/null > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h > @@ -0,0 +1,112 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * This code gives functions to avoid code duplication while interacting with > + * the TUXEDO NB04 wmi interfaces. > + * > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > + */ > + > +#ifndef TUXEDO_NB04_WMI_UTIL_H > +#define TUXEDO_NB04_WMI_UTIL_H > + > +#include <linux/wmi.h> > + > +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_TOUCHPAD 1 > +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_KEYBOARD 2 > +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_APP_PAGES 3 > + > +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_NONE 0 > +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_PER_KEY 1 > +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_FOUR_ZONE 2 > +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_WHITE_ONLY 3 > + > +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII 0 > +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO 1 > + > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_RED 1 > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_GREEN 2 > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_YELLOW 3 > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_BLUE 4 > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_PURPLE 5 > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_INDIGO 6 > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_WHITE 7 > + > +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_DASHBOARD BIT(0) > +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_SYSTEMINFOS BIT(1) > +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_KBL BIT(2) > +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_HOTKEYS BIT(3) All these are quite long, I'd consider ways to make them shorter such as: DEVICE -> DEV COLOR_ID -> COLOR STATUS -> STS ? KEYBOARD_LAYOUT -> KEY_LAYOUT or KEYBOARD -> KEYB (in general) > + > + Extra newline. > +union tuxedo_nb04_wmi_8_b_in_80_b_out_input { > + uint8_t raw[8]; uXX for types. > + struct __packed { Unnecessary packed. > + uint8_t device_type; > + uint8_t reserved_0[7]; Why isn't this just reserved[7] ? > + } get_device_status_input; > +}; > + > +union tuxedo_nb04_wmi_8_b_in_80_b_out_output { > + uint8_t raw[80]; > + struct __packed { This too looks naturally aligned so packet is unnecessary. > + uint16_t return_status; > + uint8_t device_enabled; > + uint8_t kbl_type; > + uint8_t kbl_side_bar_supported; > + uint8_t keyboard_physical_layout; > + uint8_t app_pages; > + uint8_t per_key_kbl_default_color; > + uint8_t four_zone_kbl_default_color_1; > + uint8_t four_zone_kbl_default_color_2; > + uint8_t four_zone_kbl_default_color_3; > + uint8_t four_zone_kbl_default_color_4; > + uint8_t light_bar_kbl_default_color; > + uint8_t reserved_0[1]; > + uint16_t dedicated_gpu_id; > + uint8_t reserved_1[64]; > + } get_device_status_output; > +}; > + > +enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods { > + WMI_AB_GET_DEVICE_STATUS = 2, > +}; > + > + > +#define WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX 120 > + > +union tuxedo_nb04_wmi_496_b_in_80_b_out_input { > + uint8_t raw[496]; > + struct __packed { > + uint8_t reserved_0[15]; reserved[15] ? > + uint8_t lighting_setting_count; > + struct { > + uint8_t key_id; > + uint8_t red; > + uint8_t green; > + uint8_t blue; > + } lighting_settings[WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX]; > + } kbl_set_multiple_keys_input; > +}; > + > +union tuxedo_nb04_wmi_496_b_in_80_b_out_output { > + uint8_t raw[80]; > + struct __packed { > + uint8_t return_value; > + uint8_t reserved_0[79]; reserved[79] ? > + } kbl_set_multiple_keys_output; > +}; > + > +enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods { > + WMI_AB_KBL_SET_MULTIPLE_KEYS = 6, > +}; > + > + > +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, > + enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, > + union tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, > + union tuxedo_nb04_wmi_8_b_in_80_b_out_output *output); > +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, > + enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, > + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, > + union tuxedo_nb04_wmi_496_b_in_80_b_out_output *output); > + > +#endif There are number of similar cases beyond those I've marked. Please go through all the cases, not just the ones I marked for you. My general feel is that this driver is quite heavy to read which is likely because of what feels excessively long naming used. I'm not convinved being _that verbose_ adds enough value. E.g., right above you have tuxedo_nb04_wmi_8_b_in_80_b_out_methods which mostly contains what looks prefix and some sizes. What is the value of having those sizes in the name? It would be much more useful to name things by functionality rather than sizes. -- i. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-02 9:52 ` Ilpo Järvinen @ 2024-10-02 9:55 ` Pavel Machek 2024-10-02 10:01 ` Ilpo Järvinen 2024-10-02 14:53 ` Werner Sembach 1 sibling, 1 reply; 11+ messages in thread From: Pavel Machek @ 2024-10-02 9:55 UTC (permalink / raw) To: Ilpo Järvinen Cc: Werner Sembach, Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, cs, platform-driver-x86 [-- Attachment #1: Type: text/plain, Size: 967 bytes --] Hi! > > +static struct wmi_driver tuxedo_nb04_wmi_ab_driver = { > > + .driver = { > > + .name = "tuxedo_nb04_wmi_ab", > > + .probe_type = PROBE_PREFER_ASYNCHRONOUS, > > + }, > > + .id_table = tuxedo_nb04_wmi_ab_device_ids, > > + .probe = probe, > > + .remove = remove, > > + .no_singleton = true, > > +}; > > + > > +// We don't know if the WMI API is stable and how unique the GUID is for this ODM. To be on the safe > > +// side we therefore only run this driver on tested devices defined by this list. > > Please limit comment length to 80 chars and since you need multiple lines > here anyway, use the usual /* */ multiline comment formatting. This driver needs to be split into generic part + hw specific part, and reasonable kernel/user API needs to be defined for the generic part. It is really too soon to tweak comment lengths. Best regards, Pavel -- People of Russia, stop Putin before his war on Ukraine escalates. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 195 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-02 9:55 ` Pavel Machek @ 2024-10-02 10:01 ` Ilpo Järvinen 2024-10-02 10:05 ` Pavel Machek 0 siblings, 1 reply; 11+ messages in thread From: Ilpo Järvinen @ 2024-10-02 10:01 UTC (permalink / raw) To: Pavel Machek Cc: Werner Sembach, Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, cs, platform-driver-x86 On Wed, 2 Oct 2024, Pavel Machek wrote: > Hi! > > > > +static struct wmi_driver tuxedo_nb04_wmi_ab_driver = { > > > + .driver = { > > > + .name = "tuxedo_nb04_wmi_ab", > > > + .probe_type = PROBE_PREFER_ASYNCHRONOUS, > > > + }, > > > + .id_table = tuxedo_nb04_wmi_ab_device_ids, > > > + .probe = probe, > > > + .remove = remove, > > > + .no_singleton = true, > > > +}; > > > + > > > +// We don't know if the WMI API is stable and how unique the GUID is for this ODM. To be on the safe > > > +// side we therefore only run this driver on tested devices defined by this list. > > > > Please limit comment length to 80 chars and since you need multiple lines > > here anyway, use the usual /* */ multiline comment formatting. > > This driver needs to be split into generic part + hw specific part, > and reasonable kernel/user API needs to be defined for the generic > part. It is really too soon to tweak comment lengths. Coding style is not something you add on top of everything after everything else is done. It's much better to start with that right from the beginning. -- i. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-02 10:01 ` Ilpo Järvinen @ 2024-10-02 10:05 ` Pavel Machek 0 siblings, 0 replies; 11+ messages in thread From: Pavel Machek @ 2024-10-02 10:05 UTC (permalink / raw) To: Ilpo Järvinen Cc: Werner Sembach, Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, cs, platform-driver-x86 [-- Attachment #1: Type: text/plain, Size: 1533 bytes --] On Wed 2024-10-02 13:01:05, Ilpo Järvinen wrote: > On Wed, 2 Oct 2024, Pavel Machek wrote: > > > Hi! > > > > > > +static struct wmi_driver tuxedo_nb04_wmi_ab_driver = { > > > > + .driver = { > > > > + .name = "tuxedo_nb04_wmi_ab", > > > > + .probe_type = PROBE_PREFER_ASYNCHRONOUS, > > > > + }, > > > > + .id_table = tuxedo_nb04_wmi_ab_device_ids, > > > > + .probe = probe, > > > > + .remove = remove, > > > > + .no_singleton = true, > > > > +}; > > > > + > > > > +// We don't know if the WMI API is stable and how unique the GUID is for this ODM. To be on the safe > > > > +// side we therefore only run this driver on tested devices defined by this list. > > > > > > Please limit comment length to 80 chars and since you need multiple lines > > > here anyway, use the usual /* */ multiline comment formatting. > > > > This driver needs to be split into generic part + hw specific part, > > and reasonable kernel/user API needs to be defined for the generic > > part. It is really too soon to tweak comment lengths. > > Coding style is not something you add on top of everything after > everything else is done. It's much better to start with that right from > the beginning. And yes, this driver leaves something to be desired. OTOH if you comment on coding style only, it leaves impression of "everything else is ok with this", which easily leads to wasted work and frustration. Best regards, Pavel -- People of Russia, stop Putin before his war on Ukraine escalates. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 195 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-02 9:52 ` Ilpo Järvinen 2024-10-02 9:55 ` Pavel Machek @ 2024-10-02 14:53 ` Werner Sembach 2024-10-03 10:54 ` Ilpo Järvinen 1 sibling, 1 reply; 11+ messages in thread From: Werner Sembach @ 2024-10-02 14:53 UTC (permalink / raw) To: Ilpo Järvinen Cc: Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, pavel, cs, platform-driver-x86 Am 02.10.24 um 11:52 schrieb Ilpo Järvinen: > On Tue, 1 Oct 2024, Werner Sembach wrote: > >> The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a per-key >> controllable RGB keyboard backlight. The firmware API for it is implemented >> via WMI. >> >> To make the backlight userspace configurable this driver emulates a >> LampArray HID device and translates the input from hidraw to the >> corresponding WMI calls. This is a new approach as the leds subsystem lacks >> a suitable UAPI for per-key keyboard backlights, and like this no new UAPI >> needs to be established. >> >> v2: Integrated Armins feedback and fixed kernel test robot warnings. >> v3: Fixed borked subject line of v2. >> v4: Remove unrequired WMI mutex. >> Move device checking from probe to init. >> Fix device checking working exactly reverse as it should. >> Fix null pointer dereference because, hdev->driver_data != hdev->dev.driver_data. >> >> Co-developed-by: Christoffer Sandberg <cs@tuxedo.de> >> Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> >> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> >> Link: https://lore.kernel.org/all/1fb08a74-62c7-4d0c-ba5d-648e23082dcb@tuxedocomputers.com/ >> --- >> MAINTAINERS | 6 + >> drivers/platform/x86/Kconfig | 2 + >> drivers/platform/x86/Makefile | 3 + >> drivers/platform/x86/tuxedo/Kbuild | 9 + >> drivers/platform/x86/tuxedo/Kconfig | 14 + >> .../x86/tuxedo/tuxedo_nb04_wmi_ab_init.c | 99 +++ >> .../x86/tuxedo/tuxedo_nb04_wmi_ab_init.h | 19 + >> .../tuxedo_nb04_wmi_ab_virtual_lamp_array.c | 735 ++++++++++++++++++ >> .../tuxedo_nb04_wmi_ab_virtual_lamp_array.h | 18 + >> .../x86/tuxedo/tuxedo_nb04_wmi_util.c | 82 ++ >> .../x86/tuxedo/tuxedo_nb04_wmi_util.h | 112 +++ >> 11 files changed, 1099 insertions(+) >> create mode 100644 drivers/platform/x86/tuxedo/Kbuild >> create mode 100644 drivers/platform/x86/tuxedo/Kconfig >> create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c >> create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h >> create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c >> create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h >> create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c >> create mode 100644 drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index cc40a9d9b8cd1..3385ad51af194 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -23358,6 +23358,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git turbostat >> F: tools/power/x86/turbostat/ >> F: tools/testing/selftests/turbostat/ >> >> +TUXEDO DRIVERS >> +M: Werner Sembach <wse@tuxedocomputers.com> >> +L: platform-driver-x86@vger.kernel.org >> +S: Supported >> +F: drivers/platform/x86/tuxedo/ >> + >> TW5864 VIDEO4LINUX DRIVER >> M: Bluecherry Maintainers <maintainers@bluecherrydvr.com> >> M: Andrey Utkin <andrey.utkin@corp.bluecherry.net> >> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig >> index ddfccc226751f..c7cffb222adac 100644 >> --- a/drivers/platform/x86/Kconfig >> +++ b/drivers/platform/x86/Kconfig >> @@ -1196,3 +1196,5 @@ config P2SB >> The main purpose of this library is to unhide P2SB device in case >> firmware kept it hidden on some platforms in order to access devices >> behind it. >> + >> +source "drivers/platform/x86/tuxedo/Kconfig" >> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile >> index e1b1429470674..1562dcd7ad9a5 100644 >> --- a/drivers/platform/x86/Makefile >> +++ b/drivers/platform/x86/Makefile >> @@ -153,3 +153,6 @@ obj-$(CONFIG_WINMATE_FM07_KEYS) += winmate-fm07-keys.o >> >> # SEL >> obj-$(CONFIG_SEL3350_PLATFORM) += sel3350-platform.o >> + >> +# TUXEDO >> +obj-y += tuxedo/ >> diff --git a/drivers/platform/x86/tuxedo/Kbuild b/drivers/platform/x86/tuxedo/Kbuild >> new file mode 100644 >> index 0000000000000..5a3506ab98131 >> --- /dev/null >> +++ b/drivers/platform/x86/tuxedo/Kbuild >> @@ -0,0 +1,9 @@ >> +# SPDX-License-Identifier: GPL-2.0-only >> +# >> +# TUXEDO X86 Platform Specific Drivers >> +# >> + >> +tuxedo_nb04_wmi_ab-y := tuxedo_nb04_wmi_ab_init.o >> +tuxedo_nb04_wmi_ab-y += tuxedo_nb04_wmi_util.o >> +tuxedo_nb04_wmi_ab-y += tuxedo_nb04_wmi_ab_virtual_lamp_array.o >> +obj-$(CONFIG_TUXEDO_NB04_WMI_AB) += tuxedo_nb04_wmi_ab.o >> diff --git a/drivers/platform/x86/tuxedo/Kconfig b/drivers/platform/x86/tuxedo/Kconfig >> new file mode 100644 >> index 0000000000000..b1f7c6ceeaae4 >> --- /dev/null >> +++ b/drivers/platform/x86/tuxedo/Kconfig >> @@ -0,0 +1,14 @@ >> +# SPDX-License-Identifier: GPL-2.0-only >> +# >> +# TUXEDO X86 Platform Specific Drivers >> +# >> + >> +menuconfig TUXEDO_NB04_WMI_AB >> + tristate "TUXEDO NB04 WMI AB Platform Driver" >> + default m >> + help >> + This driver implements the WMI AB device found on TUXEDO Notebooks >> + with board vendor NB04. For the time being only the keyboard backlight >> + control is implemented. >> + >> + When compiled as a module it will be called tuxedo_nb04_wmi_ab. >> diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c >> new file mode 100644 >> index 0000000000000..bd5bca3b15bc7 >> --- /dev/null >> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.c >> @@ -0,0 +1,99 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * This driver implements the WMI AB device found on TUXEDO Notebooks with board >> + * vendor NB04. >> + * >> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com >> + */ >> + >> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt >> + >> +#include <linux/module.h> >> +#include <linux/wmi.h> >> +#include <linux/dmi.h> >> + >> +#include "tuxedo_nb04_wmi_ab_virtual_lamp_array.h" >> + >> +#include "tuxedo_nb04_wmi_ab_init.h" >> + >> +static int probe(struct wmi_device *wdev, const void __always_unused *context) >> +{ >> + struct tuxedo_nb04_wmi_driver_data_t *driver_data; >> + int ret; >> + >> + driver_data = devm_kzalloc(&wdev->dev, sizeof(*driver_data), GFP_KERNEL); >> + if (!driver_data) >> + return -ENOMEM; >> + >> + dev_set_drvdata(&wdev->dev, driver_data); >> + >> + ret = tuxedo_nb04_virtual_lamp_array_add_device(wdev, >> + &driver_data->virtual_lamp_array_hdev); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static void remove(struct wmi_device *wdev) >> +{ >> + struct tuxedo_nb04_wmi_driver_data_t *driver_data = dev_get_drvdata(&wdev->dev); >> + >> + hid_destroy_device(driver_data->virtual_lamp_array_hdev); >> +} >> + >> +static const struct wmi_device_id tuxedo_nb04_wmi_ab_device_ids[] = { >> + { .guid_string = "80C9BAA6-AC48-4538-9234-9F81A55E7C85" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(wmi, tuxedo_nb04_wmi_ab_device_ids); >> + >> +static struct wmi_driver tuxedo_nb04_wmi_ab_driver = { >> + .driver = { >> + .name = "tuxedo_nb04_wmi_ab", >> + .probe_type = PROBE_PREFER_ASYNCHRONOUS, >> + }, >> + .id_table = tuxedo_nb04_wmi_ab_device_ids, >> + .probe = probe, >> + .remove = remove, >> + .no_singleton = true, >> +}; >> + >> +// We don't know if the WMI API is stable and how unique the GUID is for this ODM. To be on the safe >> +// side we therefore only run this driver on tested devices defined by this list. > Please limit comment length to 80 chars and since you need multiple lines > here anyway, use the usual /* */ multiline comment formatting. > >> +static const struct dmi_system_id tested_devices_dmi_table[] __initconst = { >> + { >> + // TUXEDO Sirius 16 Gen1 >> + .matches = { >> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TUXEDO"), >> + DMI_EXACT_MATCH(DMI_BOARD_NAME, "APX958"), >> + }, >> + }, >> + { >> + // TUXEDO Sirius 16 Gen2 >> + .matches = { >> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TUXEDO"), >> + DMI_EXACT_MATCH(DMI_BOARD_NAME, "AHP958"), >> + }, >> + }, >> + { } >> +}; >> + >> +static int __init tuxedo_nb04_wmi_ab_init(void) >> +{ >> + if (!dmi_check_system(tested_devices_dmi_table)) >> + return -ENODEV; >> + >> + return wmi_driver_register(&tuxedo_nb04_wmi_ab_driver); >> +} >> +module_init(tuxedo_nb04_wmi_ab_init); >> + >> +static void __exit tuxedo_nb04_wmi_ab_exit(void) >> +{ >> + return wmi_driver_unregister(&tuxedo_nb04_wmi_ab_driver); >> +} >> +module_exit(tuxedo_nb04_wmi_ab_exit); >> + >> +MODULE_DESCRIPTION("Virtual HID LampArray interface for TUXEDO NB04 devices"); >> +MODULE_AUTHOR("Werner Sembach <wse@tuxedocomputers.com>"); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h >> new file mode 100644 >> index 0000000000000..3306e3d28bcab >> --- /dev/null >> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_init.h >> @@ -0,0 +1,19 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * This driver implements the WMI AB device found on TUXEDO Notebooks with board >> + * vendor NB04. >> + * >> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com >> + */ >> + >> +#ifndef TUXEDO_NB04_WMI_AB_INIT_H >> +#define TUXEDO_NB04_WMI_AB_INIT_H >> + >> +#include <linux/mutex.h> >> +#include <linux/hid.h> >> + >> +struct tuxedo_nb04_wmi_driver_data_t { >> + struct hid_device *virtual_lamp_array_hdev; >> +}; >> + >> +#endif >> diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c >> new file mode 100644 >> index 0000000000000..906eb59c5cfd2 >> --- /dev/null >> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.c >> @@ -0,0 +1,735 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * This code gives the built in RGB lighting of the TUXEDO NB04 devices a >> + * standardised interface, namely HID LampArray. >> + * >> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com >> + */ >> + >> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > Please add all the includes here for the things you use below (in > alphabetical order). > >> +#include "tuxedo_nb04_wmi_util.h" >> + >> +#include "tuxedo_nb04_wmi_ab_virtual_lamp_array.h" >> + >> +enum report_ids { >> + LAMP_ARRAY_ATTRIBUTES_REPORT_ID = 0x01, >> + LAMP_ATTRIBUTES_REQUEST_REPORT_ID = 0x02, >> + LAMP_ATTRIBUTES_RESPONSE_REPORT_ID = 0x03, >> + LAMP_MULTI_UPDATE_REPORT_ID = 0x04, >> + LAMP_RANGE_UPDATE_REPORT_ID = 0x05, >> + LAMP_ARRAY_CONTROL_REPORT_ID = 0x06, >> +}; >> + >> +static const uint8_t sirius_16_ansii_kbl_mapping[] = { > u8 for kernel internal things. ok > >> + 0x29, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, >> + 0x43, 0x44, 0x45, 0xf1, 0x46, 0x4c, 0x4a, 0x4d, 0x4b, 0x4e, >> + 0x35, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, >> + 0x27, 0x2d, 0x2e, 0x2a, 0x53, 0x55, 0x54, 0x56, >> + 0x2b, 0x14, 0x1a, 0x08, 0x15, 0x17, 0x1c, 0x18, 0x0c, 0x12, >> + 0x13, 0x2f, 0x30, 0x31, 0x5f, 0x60, 0x61, >> + 0x39, 0x04, 0x16, 0x07, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x0f, >> + 0x33, 0x34, 0x28, 0x5c, 0x5d, 0x5e, 0x57, >> + 0xe1, 0x1d, 0x1b, 0x06, 0x19, 0x05, 0x11, 0x10, 0x36, 0x37, >> + 0x38, 0xe5, 0x52, 0x59, 0x5a, 0x5b, >> + 0xe0, 0xfe, 0xe3, 0xe2, 0x2c, 0xe6, 0x65, 0xe4, 0x50, 0x51, >> + 0x4f, 0x62, 0x63, 0x58 > Why are these aligned in the odd way? to see where the numpad begin to have some kind of orientation 2 rows here are one physical row with the gap in front of the numpad > >> +}; >> + >> +static const uint32_t sirius_16_ansii_kbl_mapping_pos_x[] = { > u32 ok > >> + 25000, 41700, 58400, 75100, 91800, 108500, 125200, 141900, 158600, 175300, >> + 192000, 208700, 225400, 242100, 258800, 275500, 294500, 311200, 327900, 344600, >> + 24500, 42500, 61000, 79500, 98000, 116500, 135000, 153500, 172000, 190500, >> + 209000, 227500, 246000, 269500, 294500, 311200, 327900, 344600, >> + 31000, 51500, 70000, 88500, 107000, 125500, 144000, 162500, 181000, 199500, >> + 218000, 236500, 255000, 273500, 294500, 311200, 327900, >> + 33000, 57000, 75500, 94000, 112500, 131000, 149500, 168000, 186500, 205000, >> + 223500, 242000, 267500, 294500, 311200, 327900, 344600, >> + 37000, 66000, 84500, 103000, 121500, 140000, 158500, 177000, 195500, 214000, >> + 232500, 251500, 273500, 294500, 311200, 327900, >> + 28000, 47500, 66000, 84500, 140000, 195500, 214000, 234000, 255000, 273500, >> + 292000, 311200, 327900, 344600 >> +}; >> + >> +static const uint32_t sirius_16_ansii_kbl_mapping_pos_y[] = { >> + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, >> + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, >> + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, >> + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, >> + 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, >> + 85500, 85500, 85500, 85500, 85500, 85500, 85500, >> + 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, >> + 103500, 103500, 103500, 103500, 103500, 103500, 94500, >> + 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, >> + 121500, 121500, 129000, 121500, 121500, 121500, >> + 139500, 139500, 139500, 139500, 139500, 139500, 139500, 139500, 147000, 147000, >> + 147000, 139500, 139500, 130500 >> +}; >> + >> +static const uint32_t sirius_16_ansii_kbl_mapping_pos_z[] = { >> + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, >> + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, >> + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, >> + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, >> + 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, >> + 5500, 5500, 5500, 5500, 5500, 5500, 5500, >> + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, >> + 5750, 5750, 5750, 5750, 5750, 5750, 5625, >> + 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, >> + 6000, 6000, 6125, 6000, 6000, 6000, >> + 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6375, 6375, >> + 6375, 6250, 6250, 6125 >> +}; >> + >> +static const uint8_t sirius_16_iso_kbl_mapping[] = { >> + 0x29, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, >> + 0x43, 0x44, 0x45, 0xf1, 0x46, 0x4c, 0x4a, 0x4d, 0x4b, 0x4e, >> + 0x35, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, >> + 0x27, 0x2d, 0x2e, 0x2a, 0x53, 0x55, 0x54, 0x56, >> + 0x2b, 0x14, 0x1a, 0x08, 0x15, 0x17, 0x1c, 0x18, 0x0c, 0x12, >> + 0x13, 0x2f, 0x30, 0x5f, 0x60, 0x61, >> + 0x39, 0x04, 0x16, 0x07, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x0f, >> + 0x33, 0x34, 0x32, 0x28, 0x5c, 0x5d, 0x5e, 0x57, >> + 0xe1, 0x64, 0x1d, 0x1b, 0x06, 0x19, 0x05, 0x11, 0x10, 0x36, >> + 0x37, 0x38, 0xe5, 0x52, 0x59, 0x5a, 0x5b, >> + 0xe0, 0xfe, 0xe3, 0xe2, 0x2c, 0xe6, 0x65, 0xe4, 0x50, 0x51, >> + 0x4f, 0x62, 0x63, 0x58 >> +}; >> + >> +static const uint32_t sirius_16_iso_kbl_mapping_pos_x[] = { >> + 25000, 41700, 58400, 75100, 91800, 108500, 125200, 141900, 158600, 175300, >> + 192000, 208700, 225400, 242100, 258800, 275500, 294500, 311200, 327900, 344600, >> + 24500, 42500, 61000, 79500, 98000, 116500, 135000, 153500, 172000, 190500, >> + 209000, 227500, 246000, 269500, 294500, 311200, 327900, 344600, >> + 31000, 51500, 70000, 88500, 107000, 125500, 144000, 162500, 181000, 199500, >> + 218000, 234500, 251000, 294500, 311200, 327900, >> + 33000, 57000, 75500, 94000, 112500, 131000, 149500, 168000, 186500, 205000, >> + 223500, 240000, 256500, 271500, 294500, 311200, 327900, 344600, >> + 28000, 47500, 66000, 84500, 103000, 121500, 140000, 158500, 177000, 195500, >> + 214000, 232500, 251500, 273500, 294500, 311200, 327900, >> + 28000, 47500, 66000, 84500, 140000, 195500, 214000, 234000, 255000, 273500, >> + 292000, 311200, 327900, 344600 >> +}; >> + >> +static const uint32_t sirius_16_iso_kbl_mapping_pos_y[] = { >> + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, >> + 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, 53000, >> + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, >> + 67500, 67500, 67500, 67500, 67500, 67500, 67500, 67500, >> + 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, 85500, >> + 85500, 85500, 85500, 85500, 85500, 85500, >> + 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, 103500, >> + 103500, 103500, 103500, 94500, 103500, 103500, 103500, 94500, >> + 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, 121500, >> + 121500, 121500, 121500, 129000, 121500, 121500, 121500, >> + 139500, 139500, 139500, 139500, 139500, 139500, 139500, 139500, 147000, 147000, >> + 147000, 139500, 139500, 130500 >> +}; >> + >> +static const uint32_t sirius_16_iso_kbl_mapping_pos_z[] = { >> + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, >> + 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, 5000, >> + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, >> + 5250, 5250, 5250, 5250, 5250, 5250, 5250, 5250, >> + 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, 5500, >> + 5500, 5500, 5500, 5500, 5500, 5500, >> + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5750, >> + 5750, 5750, 5750, 5750, 5750, 5750, 5750, 5625, >> + 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, >> + 6000, 6000, 6000, 6125, 6000, 6000, 6000, >> + 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6250, 6375, 6375, >> + 6375, 6250, 6250, 6125 >> +}; >> + >> +struct driver_data_t { >> + uint8_t keyboard_type; >> + uint8_t lamp_count; >> + uint8_t next_lamp_id; >> + union tuxedo_nb04_wmi_496_b_in_80_b_out_input next_kbl_set_multiple_keys_input; >> +}; >> + >> + >> +static int ll_start(struct hid_device *hdev) >> +{ >> + struct driver_data_t *driver_data; >> + struct wmi_device *wdev = to_wmi_device(hdev->dev.parent); >> + int ret; >> + union tuxedo_nb04_wmi_8_b_in_80_b_out_input input; >> + union tuxedo_nb04_wmi_8_b_in_80_b_out_output output; > Reverse xmas-tree order. ok > >> + >> + driver_data = devm_kzalloc(&hdev->dev, sizeof(*driver_data), GFP_KERNEL); >> + if (!driver_data) >> + return -ENOMEM; >> + >> + input.get_device_status_input.device_type = WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_KEYBOARD; >> + ret = tuxedo_nb04_wmi_8_b_in_80_b_out(wdev, WMI_AB_GET_DEVICE_STATUS, &input, &output); >> + if (ret) >> + return ret; >> + >> + driver_data->keyboard_type = output.get_device_status_output.keyboard_physical_layout; >> + driver_data->lamp_count = sizeof(sirius_16_ansii_kbl_mapping); >> + driver_data->next_lamp_id = 0; >> + >> + hdev->driver_data = driver_data; >> + >> + return ret; >> +} >> + >> + >> +static void ll_stop(struct hid_device __always_unused *hdev) >> +{ >> +} >> + >> + >> +static int ll_open(struct hid_device __always_unused *hdev) >> +{ >> + return 0; >> +} >> + >> + >> +static void ll_close(struct hid_device __always_unused *hdev) >> +{ >> +} >> + >> + >> +static uint8_t report_descriptor[327] = { > Use u8 for things internal to kernel. ok > >> + 0x05, 0x59, // Usage Page (Lighting and Illumination) >> + 0x09, 0x01, // Usage (Lamp Array) >> + 0xa1, 0x01, // Collection (Application) >> + 0x85, LAMP_ARRAY_ATTRIBUTES_REPORT_ID, // Report ID (1) >> + 0x09, 0x02, // Usage (Lamp Array Attributes Report) >> + 0xa1, 0x02, // Collection (Logical) >> + 0x09, 0x03, // Usage (Lamp Count) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) >> + 0x75, 0x10, // Report Size (16) >> + 0x95, 0x01, // Report Count (1) >> + 0xb1, 0x03, // Feature (Cnst,Var,Abs) >> + 0x09, 0x04, // Usage (Bounding Box Width In Micrometers) >> + 0x09, 0x05, // Usage (Bounding Box Height In Micrometers) >> + 0x09, 0x06, // Usage (Bounding Box Depth In Micrometers) >> + 0x09, 0x07, // Usage (Lamp Array Kind) >> + 0x09, 0x08, // Usage (Min Update Interval In Microseconds) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x27, 0xff, 0xff, 0xff, 0x7f, // Logical Maximum (2147483647) >> + 0x75, 0x20, // Report Size (32) >> + 0x95, 0x05, // Report Count (5) >> + 0xb1, 0x03, // Feature (Cnst,Var,Abs) >> + 0xc0, // End Collection >> + 0x85, LAMP_ATTRIBUTES_REQUEST_REPORT_ID, // Report ID (2) >> + 0x09, 0x20, // Usage (Lamp Attributes Request Report) >> + 0xa1, 0x02, // Collection (Logical) >> + 0x09, 0x21, // Usage (Lamp Id) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) >> + 0x75, 0x10, // Report Size (16) >> + 0x95, 0x01, // Report Count (1) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0xc0, // End Collection >> + 0x85, LAMP_ATTRIBUTES_RESPONSE_REPORT_ID, // Report ID (3) >> + 0x09, 0x22, // Usage (Lamp Attributes Response Report) >> + 0xa1, 0x02, // Collection (Logical) >> + 0x09, 0x21, // Usage (Lamp Id) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) >> + 0x75, 0x10, // Report Size (16) >> + 0x95, 0x01, // Report Count (1) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0x09, 0x23, // Usage (Position X In Micrometers) >> + 0x09, 0x24, // Usage (Position Y In Micrometers) >> + 0x09, 0x25, // Usage (Position Z In Micrometers) >> + 0x09, 0x27, // Usage (Update Latency In Microseconds) >> + 0x09, 0x26, // Usage (Lamp Purposes) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x27, 0xff, 0xff, 0xff, 0x7f, // Logical Maximum (2147483647) >> + 0x75, 0x20, // Report Size (32) >> + 0x95, 0x05, // Report Count (5) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0x09, 0x28, // Usage (Red Level Count) >> + 0x09, 0x29, // Usage (Green Level Count) >> + 0x09, 0x2a, // Usage (Blue Level Count) >> + 0x09, 0x2b, // Usage (Intensity Level Count) >> + 0x09, 0x2c, // Usage (Is Programmable) >> + 0x09, 0x2d, // Usage (Input Binding) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x26, 0xff, 0x00, // Logical Maximum (255) >> + 0x75, 0x08, // Report Size (8) >> + 0x95, 0x06, // Report Count (6) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0xc0, // End Collection >> + 0x85, LAMP_MULTI_UPDATE_REPORT_ID, // Report ID (4) >> + 0x09, 0x50, // Usage (Lamp Multi Update Report) >> + 0xa1, 0x02, // Collection (Logical) >> + 0x09, 0x03, // Usage (Lamp Count) >> + 0x09, 0x55, // Usage (Lamp Update Flags) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x25, 0x08, // Logical Maximum (8) >> + 0x75, 0x08, // Report Size (8) >> + 0x95, 0x02, // Report Count (2) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0x09, 0x21, // Usage (Lamp Id) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) >> + 0x75, 0x10, // Report Size (16) >> + 0x95, 0x08, // Report Count (8) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x26, 0xff, 0x00, // Logical Maximum (255) >> + 0x75, 0x08, // Report Size (8) >> + 0x95, 0x20, // Report Count (32) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0xc0, // End Collection >> + 0x85, LAMP_RANGE_UPDATE_REPORT_ID, // Report ID (5) >> + 0x09, 0x60, // Usage (Lamp Range Update Report) >> + 0xa1, 0x02, // Collection (Logical) >> + 0x09, 0x55, // Usage (Lamp Update Flags) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x25, 0x08, // Logical Maximum (8) >> + 0x75, 0x08, // Report Size (8) >> + 0x95, 0x01, // Report Count (1) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0x09, 0x61, // Usage (Lamp Id Start) >> + 0x09, 0x62, // Usage (Lamp Id End) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x27, 0xff, 0xff, 0x00, 0x00, // Logical Maximum (65535) >> + 0x75, 0x10, // Report Size (16) >> + 0x95, 0x02, // Report Count (2) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0x09, 0x51, // Usage (Red Update Channel) >> + 0x09, 0x52, // Usage (Green Update Channel) >> + 0x09, 0x53, // Usage (Blue Update Channel) >> + 0x09, 0x54, // Usage (Intensity Update Channel) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x26, 0xff, 0x00, // Logical Maximum (255) >> + 0x75, 0x08, // Report Size (8) >> + 0x95, 0x04, // Report Count (4) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0xc0, // End Collection >> + 0x85, LAMP_ARRAY_CONTROL_REPORT_ID, // Report ID (6) >> + 0x09, 0x70, // Usage (Lamp Array Control Report) >> + 0xa1, 0x02, // Collection (Logical) >> + 0x09, 0x71, // Usage (Autonomous Mode) >> + 0x15, 0x00, // Logical Minimum (0) >> + 0x25, 0x01, // Logical Maximum (1) >> + 0x75, 0x08, // Report Size (8) >> + 0x95, 0x01, // Report Count (1) >> + 0xb1, 0x02, // Feature (Data,Var,Abs) >> + 0xc0, // End Collection >> + 0xc0 // End Collection >> +}; >> + >> +static int ll_parse(struct hid_device *hdev) >> +{ >> + return hid_parse_report(hdev, report_descriptor, sizeof(report_descriptor)); >> +} >> + >> + >> +struct __packed lamp_array_attributes_report_t { >> + const uint8_t report_id; >> + uint16_t lamp_count; >> + uint32_t bounding_box_width_in_micrometers; >> + uint32_t bounding_box_height_in_micrometers; >> + uint32_t bounding_box_depth_in_micrometers; >> + uint32_t lamp_array_kind; >> + uint32_t min_update_interval_in_microseconds; > Use uXX types. ok > >> +}; >> + >> +static int handle_lamp_array_attributes_report(struct hid_device *hdev, >> + struct lamp_array_attributes_report_t *rep) >> +{ >> + struct driver_data_t *driver_data = hdev->driver_data; >> + >> + rep->lamp_count = driver_data->lamp_count; >> + rep->bounding_box_width_in_micrometers = 368000; >> + rep->bounding_box_height_in_micrometers = 266000; >> + rep->bounding_box_depth_in_micrometers = 30000; >> + // LampArrayKindKeyboard, see "26.2.1 LampArrayKind Values" of "HID Usage Tables v1.5" > Limit length to 80 chars. is this just for comments or also code? because checkpatch explicitly allows 100 chars > >> + rep->lamp_array_kind = 1; >> + // Some guessed value for interval microseconds >> + rep->min_update_interval_in_microseconds = 500; >> + >> + return sizeof(struct lamp_array_attributes_report_t); > sizeof(*rep) ? ok > >> +} >> + >> + >> +struct __packed lamp_attributes_request_report_t { >> + const uint8_t report_id; >> + uint16_t lamp_id; >> +}; >> + >> +static int handle_lamp_attributes_request_report(struct hid_device *hdev, >> + struct lamp_attributes_request_report_t *rep) >> +{ >> + struct driver_data_t *driver_data = hdev->driver_data; >> + >> + if (rep->lamp_id < driver_data->lamp_count) >> + driver_data->next_lamp_id = rep->lamp_id; >> + else >> + driver_data->next_lamp_id = 0; >> + >> + return sizeof(struct lamp_attributes_request_report_t); > sizeof(*rep) ? ok > >> +} >> + >> + >> +struct __packed lamp_attributes_response_report_t { >> + const uint8_t report_id; >> + uint16_t lamp_id; >> + uint32_t position_x_in_micrometers; >> + uint32_t position_y_in_micrometers; >> + uint32_t position_z_in_micrometers; >> + uint32_t update_latency_in_microseconds; >> + uint32_t lamp_purpose; >> + uint8_t red_level_count; >> + uint8_t green_level_count; >> + uint8_t blue_level_count; >> + uint8_t intensity_level_count; >> + uint8_t is_programmable; >> + uint8_t input_binding; > uXX types. ok > >> +}; >> + >> +static int handle_lamp_attributes_response_report(struct hid_device *hdev, >> + struct lamp_attributes_response_report_t *rep) >> +{ >> + struct driver_data_t *driver_data = hdev->driver_data; >> + uint16_t lamp_id = driver_data->next_lamp_id; >> + const uint8_t *kbl_mapping; >> + const uint32_t *kbl_mapping_pos_x, *kbl_mapping_pos_y, *kbl_mapping_pos_z; > uXX types. ok > >> + >> + rep->lamp_id = lamp_id; >> + // Some guessed value for latency microseconds >> + rep->update_latency_in_microseconds = 100; >> + // LampPurposeControl, see "26.3.1 LampPurposes Flags" of "HID Usage Tables v1.5" > Extra space. woopsy, will fix > > Limit to 80 chars. see above > >> + rep->lamp_purpose = 1; >> + rep->red_level_count = 0xff; >> + rep->green_level_count = 0xff; >> + rep->blue_level_count = 0xff; >> + rep->intensity_level_count = 0xff; >> + rep->is_programmable = 1; >> + >> + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) { >> + kbl_mapping = &sirius_16_ansii_kbl_mapping[0]; >> + kbl_mapping_pos_x = &sirius_16_ansii_kbl_mapping_pos_x[0]; >> + kbl_mapping_pos_y = &sirius_16_ansii_kbl_mapping_pos_y[0]; >> + kbl_mapping_pos_z = &sirius_16_ansii_kbl_mapping_pos_z[0]; >> + } else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) { >> + kbl_mapping = &sirius_16_iso_kbl_mapping[0]; >> + kbl_mapping_pos_x = &sirius_16_iso_kbl_mapping_pos_x[0]; >> + kbl_mapping_pos_y = &sirius_16_iso_kbl_mapping_pos_y[0]; >> + kbl_mapping_pos_z = &sirius_16_iso_kbl_mapping_pos_z[0]; >> + } else >> + return -EINVAL; >> + >> + if (kbl_mapping[lamp_id] <= 0xe8) >> + rep->input_binding = kbl_mapping[lamp_id]; >> + else >> + // Everything bigger is reserved/undefined, see "10 Keyboard/Keypad Page (0x07)" of >> + // "HID Usage Tables v1.5" and should return 0, see "26.8.3 Lamp Attributes" of the >> + // same document. > Use multiline /**/ comment formatting and limit to 80 chars. ok/see above > >> + rep->input_binding = 0; >> + rep->position_x_in_micrometers = kbl_mapping_pos_x[lamp_id]; >> + rep->position_y_in_micrometers = kbl_mapping_pos_y[lamp_id]; >> + rep->position_z_in_micrometers = kbl_mapping_pos_z[lamp_id]; >> + >> + driver_data->next_lamp_id = (driver_data->next_lamp_id + 1) % driver_data->lamp_count; >> + >> + return sizeof(struct lamp_attributes_response_report_t); > sizeof(*rep) ? ok > >> +} >> + >> + >> +#define LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE BIT(0) >> + >> +struct __packed lamp_multi_update_report_t { >> + const uint8_t report_id; >> + uint8_t lamp_count; >> + uint8_t lamp_update_flags; >> + uint16_t lamp_id[8]; >> + struct { >> + uint8_t red; >> + uint8_t green; >> + uint8_t blue; >> + uint8_t intensity; >> + } update_channels[8]; > uXX types. ok > >> +}; >> + >> +static int handle_lamp_multi_update_report(struct hid_device *hdev, >> + struct lamp_multi_update_report_t *rep) >> +{ >> + struct driver_data_t *driver_data = hdev->driver_data; >> + struct wmi_device *wdev = to_wmi_device(hdev->dev.parent); >> + int ret; >> + uint8_t lamp_count = 0, key_id, key_id_j; >> + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *next = >> + &driver_data->next_kbl_set_multiple_keys_input; >> + union tuxedo_nb04_wmi_496_b_in_80_b_out_output output; > Reverse xmas-tree order (to the extent viable). ok > >> + >> + // Catching missformated lamp_multi_update_report and fail silently according to >> + // "HID Usage Tables v1.5" >> + for (int i = 0; i < rep->lamp_count; ++i) { >> + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) >> + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); >> + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) >> + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); >> + >> + if (rep->lamp_id[i] > lamp_count) { >> + pr_debug("Out of bounds lamp_id in lamp_multi_update_report. Skippng whole report!\n"); >> + return sizeof(struct lamp_multi_update_report_t); > sizeof(*rep)? ok > >> + } >> + >> + for (int j = i + 1; j < rep->lamp_count; ++j) { >> + if (rep->lamp_id[i] == rep->lamp_id[j]) { >> + pr_debug("Duplicate lamp_id in lamp_multi_update_report. Skippng whole report!\n"); >> + return sizeof(struct lamp_multi_update_report_t); >> + } >> + } >> + } >> + >> + for (int i = 0; i < rep->lamp_count; ++i) { >> + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) >> + key_id = sirius_16_ansii_kbl_mapping[rep->lamp_id[i]]; >> + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) >> + key_id = sirius_16_iso_kbl_mapping[rep->lamp_id[i]]; >> + >> + for (int j = 0; j < WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX; ++j) { >> + key_id_j = next->kbl_set_multiple_keys_input.lighting_settings[j].key_id; >> + if (key_id_j == 0x00 || key_id_j == key_id) { > Reverse condition and use continue to lower the indentation level of the > main loop body. Not sure if this helps with readability, at least for me i think that would take more time to parse the reversed condition. > >> + if (key_id_j == 0x00) >> + next->kbl_set_multiple_keys_input.lighting_setting_count = >> + j + 1; >> + next->kbl_set_multiple_keys_input.lighting_settings[j].key_id = >> + key_id; >> + // While this driver respects >> + // intensity_update_channel according to "HID >> + // Usage Tables v1.5" also on RGB leds, the >> + // Microsoft MacroPad reference implementation >> + // (https://github.com/microsoft/RP2040MacropadHidSample >> + // 1d6c3ad) does not and ignores it. If it turns >> + // out that Windows writes intensity = 0 for RGB >> + // leds instead of intensity = 255, this driver >> + // should also irgnore the >> + // intensity_update_channel. >> + next->kbl_set_multiple_keys_input.lighting_settings[j].red = >> + rep->update_channels[i].red >> + * rep->update_channels[i].intensity / 0xff; >> + next->kbl_set_multiple_keys_input.lighting_settings[j].green = >> + rep->update_channels[i].green >> + * rep->update_channels[i].intensity / 0xff; >> + next->kbl_set_multiple_keys_input.lighting_settings[j].blue = >> + rep->update_channels[i].blue >> + * rep->update_channels[i].intensity / 0xff; >> + >> + break; >> + } >> + } >> + } >> + >> + if (rep->lamp_update_flags & LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE) { >> + ret = tuxedo_nb04_wmi_496_b_in_80_b_out(wdev, WMI_AB_KBL_SET_MULTIPLE_KEYS, next, >> + &output); >> + memset(next, 0, sizeof(union tuxedo_nb04_wmi_496_b_in_80_b_out_input)); >> + if (ret) >> + return ret; >> + } >> + >> + return sizeof(struct lamp_multi_update_report_t); >> +} >> + >> + >> +struct __packed lamp_range_update_report_t { >> + const uint8_t report_id; >> + uint8_t lamp_update_flags; >> + uint16_t lamp_id_start; >> + uint16_t lamp_id_end; >> + uint8_t red_update_channel; >> + uint8_t green_update_channel; >> + uint8_t blue_update_channel; >> + uint8_t intensity_update_channel; >> +}; >> + >> +static int handle_lamp_range_update_report(struct hid_device *hdev, >> + struct lamp_range_update_report_t *report) >> +{ >> + struct driver_data_t *driver_data = hdev->driver_data; >> + int ret; >> + uint8_t lamp_count; >> + struct lamp_multi_update_report_t lamp_multi_update_report = { >> + .report_id = LAMP_MULTI_UPDATE_REPORT_ID >> + }; >> + >> + // Catching missformated lamp_range_update_report and fail silently according to >> + // "HID Usage Tables v1.5" >> + if (report->lamp_id_start > report->lamp_id_end) { >> + pr_debug("lamp_id_start > lamp_id_end in lamp_range_update_report. Skippng whole report!\n"); >> + return sizeof(struct lamp_range_update_report_t); >> + } >> + >> + if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) >> + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); >> + else if (driver_data->keyboard_type == WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) >> + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); >> + >> + if (report->lamp_id_end > lamp_count - 1) { >> + pr_debug("Out of bounds lamp_id_* in lamp_range_update_report. Skippng whole report!\n"); >> + return sizeof(struct lamp_range_update_report_t); >> + } >> + >> + // Break handle_lamp_range_update_report call down to multiple >> + // handle_lamp_multi_update_report calls to easily ensure that mixing >> + // handle_lamp_range_update_report and handle_lamp_multi_update_report >> + // does not break things. >> + for (int i = report->lamp_id_start; i < report->lamp_id_end + 1; i = i + 8) { >> + lamp_multi_update_report.lamp_count = MIN(report->lamp_id_end + 1 - i, 8); >> + if (i + lamp_multi_update_report.lamp_count == report->lamp_id_end + 1) >> + lamp_multi_update_report.lamp_update_flags |= >> + LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE; >> + >> + for (int j = 0; j < lamp_multi_update_report.lamp_count; ++j) { >> + lamp_multi_update_report.lamp_id[j] = i + j; >> + lamp_multi_update_report.update_channels[j].red = >> + report->red_update_channel; >> + lamp_multi_update_report.update_channels[j].green = >> + report->green_update_channel; >> + lamp_multi_update_report.update_channels[j].blue = >> + report->blue_update_channel; >> + lamp_multi_update_report.update_channels[j].intensity = >> + report->intensity_update_channel; >> + } >> + >> + ret = handle_lamp_multi_update_report(hdev, &lamp_multi_update_report); >> + if (ret < 0) >> + return ret; >> + else if (ret != sizeof(struct lamp_multi_update_report_t)) >> + return -EIO; >> + } >> + >> + return sizeof(struct lamp_range_update_report_t); >> +} >> + >> + >> +struct __packed lamp_array_control_report_t { >> + const uint8_t report_id; >> + uint8_t autonomous_mode; >> +}; >> + >> +static int handle_lamp_array_control_report(struct hid_device __always_unused *hdev, >> + struct lamp_array_control_report_t __always_unused *rep) >> +{ >> + // The keyboard firmware doesn't have any built in effects or controls >> + // so this is a NOOP. >> + // According to the HID Documentation (HID Usage Tables v1.5) this >> + // function is optional and can be removed from the HID Report >> + // Descriptor, but it should first be confirmed that userspace respects >> + // this possibility too. The Microsoft MacroPad reference implementation >> + // (https://github.com/microsoft/RP2040MacropadHidSample 1d6c3ad) >> + // already deviates from the spec at another point, see >> + // handle_lamp_*_update_report. >> + >> + return sizeof(struct lamp_array_control_report_t); >> +} >> + >> + >> +static int ll_raw_request(struct hid_device *hdev, unsigned char reportnum, __u8 *buf, size_t len, >> + unsigned char rtype, int reqtype) >> +{ >> + int ret; >> + >> + ret = -EINVAL; >> + if (rtype == HID_FEATURE_REPORT) { > No, reverse the logic in the condition and return -EINVAL explicitly. > It lets you lower the indentation level of the normal path. I don't quite get what you mean, i have to check 3 levels: Feature Report? Get or Set Report? Report ID? I don't see how i can do this without code duplication or 3 levels of indendation? > >> + if (reqtype == HID_REQ_GET_REPORT) { >> + if (reportnum == LAMP_ARRAY_ATTRIBUTES_REPORT_ID >> + && len == sizeof(struct lamp_array_attributes_report_t)) >> + ret = handle_lamp_array_attributes_report( >> + hdev, (struct lamp_array_attributes_report_t *)buf); >> + else if (reportnum == LAMP_ATTRIBUTES_RESPONSE_REPORT_ID >> + && len == sizeof(struct lamp_attributes_response_report_t)) >> + ret = handle_lamp_attributes_response_report( >> + hdev, (struct lamp_attributes_response_report_t *)buf); >> + } else if (reqtype == HID_REQ_SET_REPORT) { >> + if (reportnum == LAMP_ATTRIBUTES_REQUEST_REPORT_ID >> + && len == sizeof(struct lamp_attributes_request_report_t)) >> + ret = handle_lamp_attributes_request_report( >> + hdev, (struct lamp_attributes_request_report_t *)buf); >> + else if (reportnum == LAMP_MULTI_UPDATE_REPORT_ID >> + && len == sizeof(struct lamp_multi_update_report_t)) >> + ret = handle_lamp_multi_update_report( >> + hdev, (struct lamp_multi_update_report_t *)buf); >> + else if (reportnum == LAMP_RANGE_UPDATE_REPORT_ID >> + && len == sizeof(struct lamp_range_update_report_t)) >> + ret = handle_lamp_range_update_report( >> + hdev, (struct lamp_range_update_report_t *)buf); >> + else if (reportnum == LAMP_ARRAY_CONTROL_REPORT_ID >> + && len == sizeof(struct lamp_array_control_report_t)) >> + ret = handle_lamp_array_control_report( >> + hdev, (struct lamp_array_control_report_t *)buf); >> + } > This is very messy, and should IMHO use switch&case and directly return > -EINVAL on every len check inside the case blocks. Wouldn't that mean more intendation? One for the switch case and another one for the now seperate len check? > >> + } >> + >> + return ret; >> +} >> + >> +static const struct hid_ll_driver ll_driver = { >> + .start = &ll_start, >> + .stop = &ll_stop, >> + .open = &ll_open, >> + .close = &ll_close, >> + .parse = &ll_parse, >> + .raw_request = &ll_raw_request, >> +}; >> + >> +int tuxedo_nb04_virtual_lamp_array_add_device(struct wmi_device *wdev, struct hid_device **hdev_out) >> +{ >> + struct hid_device *hdev; >> + int ret; >> + >> + pr_debug("Adding TUXEDO NB04 Virtual LampArray device.\n"); >> + >> + hdev = hid_allocate_device(); >> + if (IS_ERR(hdev)) >> + return PTR_ERR(hdev); >> + *hdev_out = hdev; >> + >> + strscpy(hdev->name, "TUXEDO NB04 RGB Lighting", sizeof(hdev->name)); >> + >> + hdev->ll_driver = &ll_driver; >> + hdev->bus = BUS_VIRTUAL; >> + hdev->vendor = 0x21ba; >> + hdev->product = 0x0400; >> + hdev->dev.parent = &wdev->dev; >> + >> + ret = hid_add_device(hdev); >> + if (ret) >> + hid_destroy_device(hdev); >> + return ret; >> +} >> +EXPORT_SYMBOL(tuxedo_nb04_virtual_lamp_array_add_device); >> diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h >> new file mode 100644 >> index 0000000000000..fdc2a01d95c24 >> --- /dev/null >> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h >> @@ -0,0 +1,18 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * This code gives the built in RGB lighting of the TUXEDO NB04 devices a >> + * standardised interface, namely HID LampArray. >> + * >> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com >> + */ >> + >> +#ifndef TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H >> +#define TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H >> + >> +#include <linux/wmi.h> >> +#include <linux/hid.h> >> + >> +int tuxedo_nb04_virtual_lamp_array_add_device(struct wmi_device *wdev, >> + struct hid_device **hdev_out); >> + >> +#endif >> diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c >> new file mode 100644 >> index 0000000000000..a61b59d225f9f >> --- /dev/null >> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c >> @@ -0,0 +1,82 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * This code gives functions to avoid code duplication while interacting with >> + * the TUXEDO NB04 wmi interfaces. >> + * >> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > The usual custom is to put <> around email addresses. ok > >> + */ >> + >> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > Add all includes for the stuff you use below. also linux/wmi.h? or it it enough that that is in the directly associated .h file? > >> +#include "tuxedo_nb04_wmi_ab_init.h" >> + >> +#include "tuxedo_nb04_wmi_util.h" >> + >> +static int __wmi_method_acpi_object_out(struct wmi_device *wdev, uint32_t wmi_method_id, >> + uint8_t *in, acpi_size in_len, union acpi_object **out) >> +{ >> + struct acpi_buffer acpi_buffer_in = { in_len, in }; >> + struct acpi_buffer acpi_buffer_out = { ACPI_ALLOCATE_BUFFER, NULL }; >> + >> + pr_debug("Evaluate WMI method: %u in:\n", wmi_method_id); >> + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, in, in_len); >> + >> + acpi_status status = wmidev_evaluate_method(wdev, 0, wmi_method_id, &acpi_buffer_in, >> + &acpi_buffer_out); >> + if (ACPI_FAILURE(status)) { >> + pr_err("Failed to evaluate WMI method.\n"); > You should use dev_err() instead of pr_err(). ok > >> + return -EIO; >> + } >> + if (!acpi_buffer_out.pointer) { >> + pr_err("Unexpected empty out buffer.\n"); >> + return -ENODATA; >> + } >> + >> + *out = acpi_buffer_out.pointer; >> + >> + return 0; >> +} >> + >> +static int __wmi_method_buffer_out(struct wmi_device *wdev, uint32_t wmi_method_id, uint8_t *in, >> + acpi_size in_len, uint8_t *out, acpi_size out_len) >> +{ >> + int ret; >> + union acpi_object *acpi_object_out = NULL; > Reverse xmas tree order. ok > >> + >> + ret = __wmi_method_acpi_object_out(wdev, wmi_method_id, in, in_len, &acpi_object_out); >> + if (ret) >> + return ret; >> + >> + if (acpi_object_out->type != ACPI_TYPE_BUFFER) { >> + pr_err("Unexpected out buffer type. Expected: %u Got: %u\n", ACPI_TYPE_BUFFER, >> + acpi_object_out->type); >> + kfree(acpi_object_out); >> + return -EIO; >> + } >> + if (acpi_object_out->buffer.length < out_len) { >> + pr_err("Unexpected out buffer length.\n"); >> + kfree(acpi_object_out); >> + return -EIO; > Duplicated error paths should use goto to handle rollback. ok > >> + } >> + >> + memcpy(out, acpi_object_out->buffer.pointer, out_len); >> + kfree(acpi_object_out); >> + >> + return ret; >> +} >> + >> +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, >> + enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, >> + union tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, >> + union tuxedo_nb04_wmi_8_b_in_80_b_out_output *output) >> +{ >> + return __wmi_method_buffer_out(wdev, method, input->raw, 8, output->raw, 80); >> +} >> + >> +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, >> + enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, >> + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, >> + union tuxedo_nb04_wmi_496_b_in_80_b_out_output *output) >> +{ >> + return __wmi_method_buffer_out(wdev, method, input->raw, 496, output->raw, 80); >> +} >> diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h >> new file mode 100644 >> index 0000000000000..2765cbe9fcfef >> --- /dev/null >> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h >> @@ -0,0 +1,112 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * This code gives functions to avoid code duplication while interacting with >> + * the TUXEDO NB04 wmi interfaces. >> + * >> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com >> + */ >> + >> +#ifndef TUXEDO_NB04_WMI_UTIL_H >> +#define TUXEDO_NB04_WMI_UTIL_H >> + >> +#include <linux/wmi.h> >> + >> +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_TOUCHPAD 1 >> +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_KEYBOARD 2 >> +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_APP_PAGES 3 >> + >> +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_NONE 0 >> +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_PER_KEY 1 >> +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_FOUR_ZONE 2 >> +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_WHITE_ONLY 3 >> + >> +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII 0 >> +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO 1 >> + >> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_RED 1 >> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_GREEN 2 >> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_YELLOW 3 >> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_BLUE 4 >> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_PURPLE 5 >> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_INDIGO 6 >> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_WHITE 7 >> + >> +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_DASHBOARD BIT(0) >> +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_SYSTEMINFOS BIT(1) >> +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_KBL BIT(2) >> +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_HOTKEYS BIT(3) > All these are quite long, I'd consider ways to make them shorter such as: > > DEVICE -> DEV > COLOR_ID -> COLOR > STATUS -> STS ? > KEYBOARD_LAYOUT -> KEY_LAYOUT or KEYBOARD -> KEYB (in general) These names match directly internal documentation, if it's no major problem i would like to keep the names for future reference. > >> + >> + > Extra newline. ok > >> +union tuxedo_nb04_wmi_8_b_in_80_b_out_input { >> + uint8_t raw[8]; > uXX for types. ok > >> + struct __packed { > Unnecessary packed. if it's not harmfull i would like to keep it so I don't forget it when the reserved byts might be used sometime int the future > >> + uint8_t device_type; >> + uint8_t reserved_0[7]; > Why isn't this just reserved[7] ? to match the name scheme of the other structs > >> + } get_device_status_input; >> +}; >> + >> +union tuxedo_nb04_wmi_8_b_in_80_b_out_output { >> + uint8_t raw[80]; >> + struct __packed { > This too looks naturally aligned so packet is unnecessary. see above > >> + uint16_t return_status; >> + uint8_t device_enabled; >> + uint8_t kbl_type; >> + uint8_t kbl_side_bar_supported; >> + uint8_t keyboard_physical_layout; >> + uint8_t app_pages; >> + uint8_t per_key_kbl_default_color; >> + uint8_t four_zone_kbl_default_color_1; >> + uint8_t four_zone_kbl_default_color_2; >> + uint8_t four_zone_kbl_default_color_3; >> + uint8_t four_zone_kbl_default_color_4; >> + uint8_t light_bar_kbl_default_color; >> + uint8_t reserved_0[1]; >> + uint16_t dedicated_gpu_id; >> + uint8_t reserved_1[64]; >> + } get_device_status_output; >> +}; >> + >> +enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods { >> + WMI_AB_GET_DEVICE_STATUS = 2, >> +}; >> + >> + >> +#define WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX 120 >> + >> +union tuxedo_nb04_wmi_496_b_in_80_b_out_input { >> + uint8_t raw[496]; >> + struct __packed { >> + uint8_t reserved_0[15]; > reserved[15] ? see above > >> + uint8_t lighting_setting_count; >> + struct { >> + uint8_t key_id; >> + uint8_t red; >> + uint8_t green; >> + uint8_t blue; >> + } lighting_settings[WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX]; >> + } kbl_set_multiple_keys_input; >> +}; >> + >> +union tuxedo_nb04_wmi_496_b_in_80_b_out_output { >> + uint8_t raw[80]; >> + struct __packed { >> + uint8_t return_value; >> + uint8_t reserved_0[79]; > reserved[79] ? see above > >> + } kbl_set_multiple_keys_output; >> +}; >> + >> +enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods { >> + WMI_AB_KBL_SET_MULTIPLE_KEYS = 6, >> +}; >> + >> + >> +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, >> + enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, >> + union tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, >> + union tuxedo_nb04_wmi_8_b_in_80_b_out_output *output); >> +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, >> + enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, >> + union tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, >> + union tuxedo_nb04_wmi_496_b_in_80_b_out_output *output); >> + >> +#endif > There are number of similar cases beyond those I've marked. Please go > through all the cases, not just the ones I marked for you. > > My general feel is that this driver is quite heavy to read which is likely > because of what feels excessively long naming used. I'm not convinved > being _that verbose_ adds enough value. When it comes down to the wmi structs I named stuff after the internal documentation for easy future reference. Everywhere else I shortened the names for everything that is static, but i can do a second pass. > > E.g., right above you have tuxedo_nb04_wmi_8_b_in_80_b_out_methods which > mostly contains what looks prefix and some sizes. What is the value of > having those sizes in the name? It would be much more useful to name > things by functionality rather than sizes. > While i currently only implement 2 functions of that wmi api there are more and this interface is written with the intend to be easily expandable to the other functions in the future. That why i choose the rather generic names of just the input and output length because there is no semantic connection between the wmi methods in tuxedo_nb04_wmi_8_b_in_80_b_out and tuxedo_nb04_wmi_496_b_in_80_b_out respectively that would make for a good name. Best regards, Werner ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-02 14:53 ` Werner Sembach @ 2024-10-03 10:54 ` Ilpo Järvinen 2024-10-04 14:30 ` Werner Sembach 0 siblings, 1 reply; 11+ messages in thread From: Ilpo Järvinen @ 2024-10-03 10:54 UTC (permalink / raw) To: Werner Sembach Cc: Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, pavel, cs, platform-driver-x86 [-- Attachment #1: Type: text/plain, Size: 28718 bytes --] On Wed, 2 Oct 2024, Werner Sembach wrote: > Am 02.10.24 um 11:52 schrieb Ilpo Järvinen: > > On Tue, 1 Oct 2024, Werner Sembach wrote: > > > > > The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a per-key > > > controllable RGB keyboard backlight. The firmware API for it is > > > implemented > > > via WMI. > > > > > > To make the backlight userspace configurable this driver emulates a > > > LampArray HID device and translates the input from hidraw to the > > > corresponding WMI calls. This is a new approach as the leds subsystem > > > lacks > > > a suitable UAPI for per-key keyboard backlights, and like this no new UAPI > > > needs to be established. > > > > > > v2: Integrated Armins feedback and fixed kernel test robot warnings. > > > v3: Fixed borked subject line of v2. > > > v4: Remove unrequired WMI mutex. > > > Move device checking from probe to init. > > > Fix device checking working exactly reverse as it should. > > > Fix null pointer dereference because, hdev->driver_data != > > > hdev->dev.driver_data. > > > > > > Co-developed-by: Christoffer Sandberg <cs@tuxedo.de> > > > Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> > > > Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> > > > Link: > > > https://lore.kernel.org/all/1fb08a74-62c7-4d0c-ba5d-648e23082dcb@tuxedocomputers.com/ > > > --- I came across few new things that I didn't notice previously while writing this reply. I tried to cut the reply size down so hopefully they don't get lost as easily. > > > + 0x29, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, > > > + 0x43, 0x44, 0x45, 0xf1, 0x46, 0x4c, 0x4a, 0x4d, 0x4b, 0x4e, > > > + 0x35, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, > > > + 0x27, 0x2d, 0x2e, 0x2a, 0x53, 0x55, 0x54, 0x56, > > > + 0x2b, 0x14, 0x1a, 0x08, 0x15, 0x17, 0x1c, 0x18, 0x0c, 0x12, > > > + 0x13, 0x2f, 0x30, 0x31, 0x5f, 0x60, 0x61, > > > + 0x39, 0x04, 0x16, 0x07, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x0f, > > > + 0x33, 0x34, 0x28, 0x5c, 0x5d, 0x5e, 0x57, > > > + 0xe1, 0x1d, 0x1b, 0x06, 0x19, 0x05, 0x11, 0x10, 0x36, 0x37, > > > + 0x38, 0xe5, 0x52, 0x59, 0x5a, 0x5b, > > > + 0xe0, 0xfe, 0xe3, 0xe2, 0x2c, 0xe6, 0x65, 0xe4, 0x50, 0x51, > > > + 0x4f, 0x62, 0x63, 0x58 > > Why are these aligned in the odd way? > > to see where the numpad begin to have some kind of orientation > > 2 rows here are one physical row with the gap in front of the numpad Okay, thanks. > > > +static int handle_lamp_array_attributes_report(struct hid_device *hdev, > > > + struct > > > lamp_array_attributes_report_t *rep) > > > +{ > > > + struct driver_data_t *driver_data = hdev->driver_data; > > > + > > > + rep->lamp_count = driver_data->lamp_count; > > > + rep->bounding_box_width_in_micrometers = 368000; > > > + rep->bounding_box_height_in_micrometers = 266000; > > > + rep->bounding_box_depth_in_micrometers = 30000; > > > + // LampArrayKindKeyboard, see "26.2.1 LampArrayKind Values" of "HID > > > Usage Tables v1.5" > > Limit length to 80 chars. > > is this just for comments or also code? > > because checkpatch explicitly allows 100 chars For comments. For code you can use longer line lengths where they make sense (doesn't mean that all lines should be tempting that limit which is usually an indication that code should be structured differently). > > > + } > > > + > > > + for (int j = i + 1; j < rep->lamp_count; ++j) { The convention these days is to use unsigned int for loop variables that are never supposed to be negative. > > > + if (rep->lamp_id[i] == rep->lamp_id[j]) { > > > + pr_debug("Duplicate lamp_id in > > > lamp_multi_update_report. Skippng whole report!\n"); Skipping > > > + return sizeof(struct > > > lamp_multi_update_report_t); > > > + } > > > + } > > > + } > > > + > > > + for (int i = 0; i < rep->lamp_count; ++i) { > > > + if (driver_data->keyboard_type == > > > WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) > > > + key_id = sirius_16_ansii_kbl_mapping[rep->lamp_id[i]]; > > > + else if (driver_data->keyboard_type == > > > WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) > > > + key_id = sirius_16_iso_kbl_mapping[rep->lamp_id[i]]; > > > + > > > + for (int j = 0; j < > > > WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX; ++j) { > > > + key_id_j = > > > next->kbl_set_multiple_keys_input.lighting_settings[j].key_id; > > > + if (key_id_j == 0x00 || key_id_j == key_id) { > > Reverse condition and use continue to lower the indentation level of the > > main loop body. > Not sure if this helps with readability, at least for me i think that would > take more time to parse the reversed condition. ? if (key_id_j != 0x00 && key_id_j != key_id) continue; The problem is not the condition itself but the indentation level in what follows. Lowering that is going to be overall beneficial. > > > + if (key_id_j == 0x00) > > > + > > > next->kbl_set_multiple_keys_input.lighting_setting_count = > > > + j + 1; But now that I think of it more, you could also do: if (key_id_j == 0x00) next->... = j+1; else if (key_id_j != key_id) continue; > > > + > > > next->kbl_set_multiple_keys_input.lighting_settings[j].key_id = > > > + key_id; You could also create local variable for next->kbl_set_multiple_keys_input.lighting_settings[j] to make this loop body more readable. Similar local vars might help elsewhere in your code too if you need to do repeated accesses deep into the same structure. > > > + // While this driver respects > > > + // intensity_update_channel according to "HID > > > + // Usage Tables v1.5" also on RGB leds, the > > > + // Microsoft MacroPad reference implementation > > > + // > > > (https://github.com/microsoft/RP2040MacropadHidSample > > > + // 1d6c3ad) does not and ignores it. If it > > > turns > > > + // out that Windows writes intensity = 0 for > > > RGB > > > + // leds instead of intensity = 255, this > > > driver > > > + // should also irgnore the ignore > > > + // intensity_update_channel. > > > + > > > next->kbl_set_multiple_keys_input.lighting_settings[j].red = > > > + rep->update_channels[i].red > > > + * > > > rep->update_channels[i].intensity / 0xff; > > > + > > > next->kbl_set_multiple_keys_input.lighting_settings[j].green = > > > + rep->update_channels[i].green > > > + * > > > rep->update_channels[i].intensity / 0xff; > > > + > > > next->kbl_set_multiple_keys_input.lighting_settings[j].blue = > > > + rep->update_channels[i].blue > > > + * > > > rep->update_channels[i].intensity / 0xff; > > > + > > > + break; > > > + } > > > + } > > > + } > > > + > > > + if (rep->lamp_update_flags & LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE) { > > > + ret = tuxedo_nb04_wmi_496_b_in_80_b_out(wdev, > > > WMI_AB_KBL_SET_MULTIPLE_KEYS, next, > > > + &output); > > > + memset(next, 0, sizeof(union > > > tuxedo_nb04_wmi_496_b_in_80_b_out_input)); > > > + if (ret) > > > + return ret; > > > + } > > > + > > > + return sizeof(struct lamp_multi_update_report_t); > > > +} > > > + > > > + > > > +struct __packed lamp_range_update_report_t { > > > + const uint8_t report_id; > > > + uint8_t lamp_update_flags; > > > + uint16_t lamp_id_start; > > > + uint16_t lamp_id_end; > > > + uint8_t red_update_channel; > > > + uint8_t green_update_channel; > > > + uint8_t blue_update_channel; > > > + uint8_t intensity_update_channel; > > > +}; > > > + > > > +static int handle_lamp_range_update_report(struct hid_device *hdev, > > > + struct lamp_range_update_report_t > > > *report) > > > +{ > > > + struct driver_data_t *driver_data = hdev->driver_data; > > > + int ret; > > > + uint8_t lamp_count; > > > + struct lamp_multi_update_report_t lamp_multi_update_report = { No idea why chose to you make the local variable this long as you seem to be fine using just "report" for naming the function parameter. How about taking e.g., the first chars from the words of the time, i.e., lmur or some similar convention for local names? The type is there close by for the code reader if one needs to know what the chars mean. > > > + .report_id = LAMP_MULTI_UPDATE_REPORT_ID > > > + }; > > > + > > > + // Catching missformated lamp_range_update_report and fail silently > > > according to > > > + // "HID Usage Tables v1.5" > > > + if (report->lamp_id_start > report->lamp_id_end) { > > > + pr_debug("lamp_id_start > lamp_id_end in > > > lamp_range_update_report. Skippng whole report!\n"); > > > + return sizeof(struct lamp_range_update_report_t); > > > + } > > > + > > > + if (driver_data->keyboard_type == > > > WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) > > > + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); > > > + else if (driver_data->keyboard_type == > > > WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) > > > + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); > > > + > > > + if (report->lamp_id_end > lamp_count - 1) { > > > + pr_debug("Out of bounds lamp_id_* in lamp_range_update_report. > > > Skippng whole report!\n"); > > > + return sizeof(struct lamp_range_update_report_t); > > > + } > > > + > > > + // Break handle_lamp_range_update_report call down to multiple > > > + // handle_lamp_multi_update_report calls to easily ensure that mixing > > > + // handle_lamp_range_update_report and handle_lamp_multi_update_report > > > + // does not break things. > > > + for (int i = report->lamp_id_start; i < report->lamp_id_end + 1; i = i > > > + 8) { > > > + lamp_multi_update_report.lamp_count = MIN(report->lamp_id_end > > > + 1 - i, 8); Please use min() or min_t() instead of MIN(). > > > + if (i + lamp_multi_update_report.lamp_count == > > > report->lamp_id_end + 1) > > > + lamp_multi_update_report.lamp_update_flags |= > > > + LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE; > > > + > > > + for (int j = 0; j < lamp_multi_update_report.lamp_count; ++j) > > > { > > > + lamp_multi_update_report.lamp_id[j] = i + j; > > > + lamp_multi_update_report.update_channels[j].red = > > > + report->red_update_channel; > > > + lamp_multi_update_report.update_channels[j].green = > > > + report->green_update_channel; > > > + lamp_multi_update_report.update_channels[j].blue = > > > + report->blue_update_channel; > > > + lamp_multi_update_report.update_channels[j].intensity > > > = > > > + report->intensity_update_channel; Shorter local var name would help here to stay on a single line. If that's not enough, local var for lmur->update_channels[j] would help further. > > > + } > > > + > > > + ret = handle_lamp_multi_update_report(hdev, > > > &lamp_multi_update_report); > > > + if (ret < 0) > > > + return ret; > > > + else if (ret != sizeof(struct lamp_multi_update_report_t)) > > > + return -EIO; > > > + } > > > + > > > + return sizeof(struct lamp_range_update_report_t); > > > +} > > > + > > > + > > > +struct __packed lamp_array_control_report_t { > > > + const uint8_t report_id; > > > + uint8_t autonomous_mode; > > > +}; > > > + > > > +static int handle_lamp_array_control_report(struct hid_device > > > __always_unused *hdev, > > > + struct lamp_array_control_report_t > > > __always_unused *rep) > > > +{ > > > + // The keyboard firmware doesn't have any built in effects or controls > > > + // so this is a NOOP. > > > + // According to the HID Documentation (HID Usage Tables v1.5) this > > > + // function is optional and can be removed from the HID Report > > > + // Descriptor, but it should first be confirmed that userspace > > > respects > > > + // this possibility too. The Microsoft MacroPad reference > > > implementation > > > + // (https://github.com/microsoft/RP2040MacropadHidSample 1d6c3ad) > > > + // already deviates from the spec at another point, see > > > + // handle_lamp_*_update_report. > > > + > > > + return sizeof(struct lamp_array_control_report_t); > > > +} > > > + > > > + > > > +static int ll_raw_request(struct hid_device *hdev, unsigned char > > > reportnum, __u8 *buf, size_t len, > > > + unsigned char rtype, int reqtype) > > > +{ > > > + int ret; > > > + > > > + ret = -EINVAL; > > > + if (rtype == HID_FEATURE_REPORT) { > > No, reverse the logic in the condition and return -EINVAL explicitly. > > It lets you lower the indentation level of the normal path. > > I don't quite get what you mean, i have to check 3 levels: > > Feature Report? > > Get or Set Report? > > Report ID? > > I don't see how i can do this without code duplication or 3 levels of > indendation? if (rtype != HID_FEATURE_REPORT) return -EINVAL; This already brings you down one indentation level and simplifies things as you don't need to do ret = -EINVAL + return at the end. > > > + if (reqtype == HID_REQ_GET_REPORT) { > > > + if (reportnum == LAMP_ARRAY_ATTRIBUTES_REPORT_ID > > > + && len == sizeof(struct > > > lamp_array_attributes_report_t)) > > > + ret = handle_lamp_array_attributes_report( > > > + hdev, (struct > > > lamp_array_attributes_report_t *)buf); > > > + else if (reportnum == > > > LAMP_ATTRIBUTES_RESPONSE_REPORT_ID > > > + && len == sizeof(struct > > > lamp_attributes_response_report_t)) > > > + ret = handle_lamp_attributes_response_report( > > > + hdev, (struct > > > lamp_attributes_response_report_t *)buf); > > > + } else if (reqtype == HID_REQ_SET_REPORT) { > > > + if (reportnum == LAMP_ATTRIBUTES_REQUEST_REPORT_ID > > > + && len == sizeof(struct > > > lamp_attributes_request_report_t)) > > > + ret = handle_lamp_attributes_request_report( > > > + hdev, (struct > > > lamp_attributes_request_report_t *)buf); > > > + else if (reportnum == LAMP_MULTI_UPDATE_REPORT_ID > > > + && len == sizeof(struct > > > lamp_multi_update_report_t)) > > > + ret = handle_lamp_multi_update_report( > > > + hdev, (struct > > > lamp_multi_update_report_t *)buf); > > > + else if (reportnum == LAMP_RANGE_UPDATE_REPORT_ID > > > + && len == sizeof(struct > > > lamp_range_update_report_t)) > > > + ret = handle_lamp_range_update_report( > > > + hdev, (struct > > > lamp_range_update_report_t *)buf); > > > + else if (reportnum == LAMP_ARRAY_CONTROL_REPORT_ID > > > + && len == sizeof(struct > > > lamp_array_control_report_t)) > > > + ret = handle_lamp_array_control_report( > > > + hdev, (struct > > > lamp_array_control_report_t *)buf); > > > + } > > This is very messy, and should IMHO use switch&case and directly return > > -EINVAL on every len check inside the case blocks. > Wouldn't that mean more intendation? One for the switch case and another one > for the now seperate len check? No it doesn't add indentation level compared with yours and this is also way easier to read: switch (reqtype) { case HID_REQ_GET_REPORT: switch (reportnum) { case LAMP_ATTRIBUTES_REQUEST_REPORT_ID: if (len != sizeof(struct lamp_array_attributes_report_t)) return -EINVAL; return handle_lamp_array_attributes_report(hdev, (struct lamp_array_attributes_report_t *)buf); case ...: if (len != ...) return -EINVAL; return ...; default: return -EINVAL; } case HID_REQ_SET_REPORT: switch (reportnum) { case: ... default: return -EINVAL; } default: return -EINVAL; } } Compiler might be stupid enough to require a few additional breaks that will never be reachable + return to the end of function so make those tweaks as needed. I'm sorry if I copy-pasted something from a wrong place in above but I believe you get the point. The error handling is now clearly visible instead of being build inside a complex if condition and returns immediately to clearly show it's really doing error handling. > > > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h > > > @@ -0,0 +1,18 @@ > > > +/* SPDX-License-Identifier: GPL-2.0 */ > > > +/* > > > + * This code gives the built in RGB lighting of the TUXEDO NB04 devices a > > > + * standardised interface, namely HID LampArray. > > > + * > > > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > > > + */ > > > + > > > +#ifndef TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H > > > +#define TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H > > > + > > > +#include <linux/wmi.h> > > > +#include <linux/hid.h> > > > + > > > +int tuxedo_nb04_virtual_lamp_array_add_device(struct wmi_device *wdev, > > > + struct hid_device **hdev_out); > > > + > > > +#endif > > > diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c > > > b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c > > > new file mode 100644 > > > index 0000000000000..a61b59d225f9f > > > --- /dev/null > > > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c > > > @@ -0,0 +1,82 @@ > > > +// SPDX-License-Identifier: GPL-2.0 > > > +/* > > > + * This code gives functions to avoid code duplication while interacting > > > with > > > + * the TUXEDO NB04 wmi interfaces. > > > + * > > > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > > The usual custom is to put <> around email addresses. > ok > > > > > + */ > > > + > > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > Add all includes for the stuff you use below. > also linux/wmi.h? or it it enough that that is in the directly associated .h > file? I'd prefer to see tham all here even if some "xx.h" does need them itself. Only if some <yy.h> includes <zz.h> and that dependency is something that is pretty much cast into stone, then including just yy.h is enough. Sadly the include-what-you-use clang tool is not there yet for the kernel so it's all manual process currently depending on reviewers paying attention to what headers are missing and which are extra. > > > +#include "tuxedo_nb04_wmi_ab_init.h" > > > + > > > +#include "tuxedo_nb04_wmi_util.h" > > > + > > > +static int __wmi_method_acpi_object_out(struct wmi_device *wdev, uint32_t > > > wmi_method_id, > > > + uint8_t *in, acpi_size in_len, union > > > acpi_object **out) > > > +{ > > > + struct acpi_buffer acpi_buffer_in = { in_len, in }; > > > + struct acpi_buffer acpi_buffer_out = { ACPI_ALLOCATE_BUFFER, NULL }; > > > + > > > + pr_debug("Evaluate WMI method: %u in:\n", wmi_method_id); > > > + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, in, in_len); > > > + > > > + acpi_status status = wmidev_evaluate_method(wdev, 0, wmi_method_id, > > > &acpi_buffer_in, > > > + &acpi_buffer_out); > > > + if (ACPI_FAILURE(status)) { > > > + pr_err("Failed to evaluate WMI method.\n"); > > You should use dev_err() instead of pr_err(). > ok > > > > > + return -EIO; > > > + } > > > + if (!acpi_buffer_out.pointer) { > > > + pr_err("Unexpected empty out buffer.\n"); > > > + return -ENODATA; > > > + } > > > + > > > + *out = acpi_buffer_out.pointer; > > > + > > > + return 0; > > > +} > > > + > > > +static int __wmi_method_buffer_out(struct wmi_device *wdev, uint32_t > > > wmi_method_id, uint8_t *in, > > > + acpi_size in_len, uint8_t *out, acpi_size > > > out_len) > > > +{ > > > + int ret; > > > + union acpi_object *acpi_object_out = NULL; > > Reverse xmas tree order. > ok > > > > > + > > > + ret = __wmi_method_acpi_object_out(wdev, wmi_method_id, in, in_len, > > > &acpi_object_out); > > > + if (ret) > > > + return ret; > > > + > > > + if (acpi_object_out->type != ACPI_TYPE_BUFFER) { > > > + pr_err("Unexpected out buffer type. Expected: %u Got: %u\n", > > > ACPI_TYPE_BUFFER, > > > + acpi_object_out->type); > > > + kfree(acpi_object_out); > > > + return -EIO; > > > + } > > > + if (acpi_object_out->buffer.length < out_len) { > > > + pr_err("Unexpected out buffer length.\n"); > > > + kfree(acpi_object_out); > > > + return -EIO; > > Duplicated error paths should use goto to handle rollback. > ok > > > > > + } > > > + > > > + memcpy(out, acpi_object_out->buffer.pointer, out_len); > > > + kfree(acpi_object_out); > > > + > > > + return ret; > > > +} > > > + > > > +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, > > > + enum > > > tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, > > > + union > > > tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, > > > + union > > > tuxedo_nb04_wmi_8_b_in_80_b_out_output *output) > > > +{ > > > + return __wmi_method_buffer_out(wdev, method, input->raw, 8, > > > output->raw, 80); > > > +} > > > + > > > +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, > > > + enum > > > tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, > > > + union > > > tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, > > > + union > > > tuxedo_nb04_wmi_496_b_in_80_b_out_output *output) > > > +{ > > > + return __wmi_method_buffer_out(wdev, method, input->raw, 496, > > > output->raw, 80); > > > +} > > > diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h > > > b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h > > > new file mode 100644 > > > index 0000000000000..2765cbe9fcfef > > > --- /dev/null > > > +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h > > > @@ -0,0 +1,112 @@ > > > +/* SPDX-License-Identifier: GPL-2.0 */ > > > +/* > > > + * This code gives functions to avoid code duplication while interacting > > > with > > > + * the TUXEDO NB04 wmi interfaces. > > > + * > > > + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com > > > + */ > > > + > > > +#ifndef TUXEDO_NB04_WMI_UTIL_H > > > +#define TUXEDO_NB04_WMI_UTIL_H > > > + > > > +#include <linux/wmi.h> > > > + > > > +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_TOUCHPAD 1 > > > +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_KEYBOARD 2 > > > +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_APP_PAGES 3 > > > + > > > +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_NONE 0 > > > +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_PER_KEY 1 > > > +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_FOUR_ZONE 2 > > > +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_WHITE_ONLY 3 > > > + > > > +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII 0 > > > +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO 1 > > > + > > > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_RED 1 > > > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_GREEN 2 > > > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_YELLOW 3 > > > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_BLUE 4 > > > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_PURPLE 5 > > > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_INDIGO 6 > > > +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_WHITE 7 > > > + > > > +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_DASHBOARD BIT(0) > > > +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_SYSTEMINFOS BIT(1) > > > +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_KBL BIT(2) > > > +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_HOTKEYS BIT(3) > > All these are quite long, I'd consider ways to make them shorter such as: > > > > DEVICE -> DEV > > COLOR_ID -> COLOR > > STATUS -> STS ? > > KEYBOARD_LAYOUT -> KEY_LAYOUT or KEYBOARD -> KEYB (in general) > These names match directly internal documentation, if it's no major problem i > would like to keep the names for future reference. I kind of assumed it might be the case, won't force you to do the shortening but please realize it will make the code look more messy because of the long line lengths, very long name are harder to read. > > > + struct __packed { > > Unnecessary packed. > if it's not harmfull i would like to keep it so I don't forget it when the > reserved byts might be used sometime int the future Packed has code generation impact so it is harmful at times. > > > + uint8_t device_type; > > > + uint8_t reserved_0[7]; > > Why isn't this just reserved[7] ? > to match the name scheme of the other structs Does it have to match? These are supposed to be dummy names that just tell don't use/touch this field? > > > + } get_device_status_input; > > > +}; > > > + > > > +union tuxedo_nb04_wmi_8_b_in_80_b_out_output { > > > + uint8_t raw[80]; > > > + struct __packed { > > This too looks naturally aligned so packet is unnecessary. > see above > > > > > + uint16_t return_status; > > > + uint8_t device_enabled; > > > + uint8_t kbl_type; > > > + uint8_t kbl_side_bar_supported; > > > + uint8_t keyboard_physical_layout; > > > + uint8_t app_pages; > > > + uint8_t per_key_kbl_default_color; > > > + uint8_t four_zone_kbl_default_color_1; > > > + uint8_t four_zone_kbl_default_color_2; > > > + uint8_t four_zone_kbl_default_color_3; > > > + uint8_t four_zone_kbl_default_color_4; > > > + uint8_t light_bar_kbl_default_color; > > > + uint8_t reserved_0[1]; > > > + uint16_t dedicated_gpu_id; > > > + uint8_t reserved_1[64]; > > > + } get_device_status_output; > > > +}; > > > + > > > +enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods { > > > + WMI_AB_GET_DEVICE_STATUS = 2, > > > +}; > > > + > > > + > > > +#define WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX 120 > > > + > > > +union tuxedo_nb04_wmi_496_b_in_80_b_out_input { > > > + uint8_t raw[496]; > > > + struct __packed { > > > + uint8_t reserved_0[15]; > > reserved[15] ? > see above > > > > > + uint8_t lighting_setting_count; > > > + struct { > > > + uint8_t key_id; > > > + uint8_t red; > > > + uint8_t green; > > > + uint8_t blue; > > > + } > > > lighting_settings[WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX]; > > > + } kbl_set_multiple_keys_input; > > > +}; > > > + > > > +union tuxedo_nb04_wmi_496_b_in_80_b_out_output { > > > + uint8_t raw[80]; > > > + struct __packed { > > > + uint8_t return_value; > > > + uint8_t reserved_0[79]; > > reserved[79] ? > see above > > > > > + } kbl_set_multiple_keys_output; > > > +}; > > > + > > > +enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods { > > > + WMI_AB_KBL_SET_MULTIPLE_KEYS = 6, > > > +}; > > > + > > > + > > > +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, > > > + enum > > > tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, > > > + union > > > tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, > > > + union > > > tuxedo_nb04_wmi_8_b_in_80_b_out_output *output); > > > +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, > > > + enum > > > tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, > > > + union > > > tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, > > > + union > > > tuxedo_nb04_wmi_496_b_in_80_b_out_output *output); > > > + > > > +#endif > > There are number of similar cases beyond those I've marked. Please go > > through all the cases, not just the ones I marked for you. > > > > My general feel is that this driver is quite heavy to read which is likely > > because of what feels excessively long naming used. I'm not convinved > > being _that verbose_ adds enough value. > > When it comes down to the wmi structs I named stuff after the internal > documentation for easy future reference. Everywhere else I shortened the names > for everything that is static, but i can do a second pass. > > > > E.g., right above you have tuxedo_nb04_wmi_8_b_in_80_b_out_methods which > > mostly contains what looks prefix and some sizes. What is the value of > > having those sizes in the name? It would be much more useful to name > > things by functionality rather than sizes. > > > While i currently only implement 2 functions of that wmi api there are more > and this interface is written with the intend to be easily expandable to the > other functions in the future. > > That why i choose the rather generic names of just the input and output length > because there is no semantic connection between the wmi methods in > tuxedo_nb04_wmi_8_b_in_80_b_out and tuxedo_nb04_wmi_496_b_in_80_b_out > respectively that would make for a good name. So the only valuable characters are prefix + 8/496/80 the rest doesn't really tell much despite all its characters :-). Details like which of the numbers is in/out and that the numbers are in bytes could IMO be left to struct's comment without loss of much information value. -- i. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-03 10:54 ` Ilpo Järvinen @ 2024-10-04 14:30 ` Werner Sembach 2024-10-04 14:46 ` Ilpo Järvinen 0 siblings, 1 reply; 11+ messages in thread From: Werner Sembach @ 2024-10-04 14:30 UTC (permalink / raw) To: Ilpo Järvinen Cc: Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, pavel, cs, platform-driver-x86 Hi Ilpo, Am 03.10.24 um 12:54 schrieb Ilpo Järvinen: > On Wed, 2 Oct 2024, Werner Sembach wrote: >> Am 02.10.24 um 11:52 schrieb Ilpo Järvinen: >>> On Tue, 1 Oct 2024, Werner Sembach wrote: >>> >>>> The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a per-key >>>> controllable RGB keyboard backlight. The firmware API for it is >>>> implemented >>>> via WMI. >>>> >>>> To make the backlight userspace configurable this driver emulates a >>>> LampArray HID device and translates the input from hidraw to the >>>> corresponding WMI calls. This is a new approach as the leds subsystem >>>> lacks >>>> a suitable UAPI for per-key keyboard backlights, and like this no new UAPI >>>> needs to be established. >>>> >>>> v2: Integrated Armins feedback and fixed kernel test robot warnings. >>>> v3: Fixed borked subject line of v2. >>>> v4: Remove unrequired WMI mutex. >>>> Move device checking from probe to init. >>>> Fix device checking working exactly reverse as it should. >>>> Fix null pointer dereference because, hdev->driver_data != >>>> hdev->dev.driver_data. >>>> >>>> Co-developed-by: Christoffer Sandberg <cs@tuxedo.de> >>>> Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> >>>> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> >>>> Link: >>>> https://lore.kernel.org/all/1fb08a74-62c7-4d0c-ba5d-648e23082dcb@tuxedocomputers.com/ >>>> --- > I came across few new things that I didn't notice previously while > writing this reply. I tried to cut the reply size down so hopefully they > don't get lost as easily. Thanks for the additional feedback. > >>>> + 0x29, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, 0x41, 0x42, >>>> + 0x43, 0x44, 0x45, 0xf1, 0x46, 0x4c, 0x4a, 0x4d, 0x4b, 0x4e, >>>> + 0x35, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, >>>> + 0x27, 0x2d, 0x2e, 0x2a, 0x53, 0x55, 0x54, 0x56, >>>> + 0x2b, 0x14, 0x1a, 0x08, 0x15, 0x17, 0x1c, 0x18, 0x0c, 0x12, >>>> + 0x13, 0x2f, 0x30, 0x31, 0x5f, 0x60, 0x61, >>>> + 0x39, 0x04, 0x16, 0x07, 0x09, 0x0a, 0x0b, 0x0d, 0x0e, 0x0f, >>>> + 0x33, 0x34, 0x28, 0x5c, 0x5d, 0x5e, 0x57, >>>> + 0xe1, 0x1d, 0x1b, 0x06, 0x19, 0x05, 0x11, 0x10, 0x36, 0x37, >>>> + 0x38, 0xe5, 0x52, 0x59, 0x5a, 0x5b, >>>> + 0xe0, 0xfe, 0xe3, 0xe2, 0x2c, 0xe6, 0x65, 0xe4, 0x50, 0x51, >>>> + 0x4f, 0x62, 0x63, 0x58 >>> Why are these aligned in the odd way? >> to see where the numpad begin to have some kind of orientation >> >> 2 rows here are one physical row with the gap in front of the numpad > Okay, thanks. > >>>> +static int handle_lamp_array_attributes_report(struct hid_device *hdev, >>>> + struct >>>> lamp_array_attributes_report_t *rep) >>>> +{ >>>> + struct driver_data_t *driver_data = hdev->driver_data; >>>> + >>>> + rep->lamp_count = driver_data->lamp_count; >>>> + rep->bounding_box_width_in_micrometers = 368000; >>>> + rep->bounding_box_height_in_micrometers = 266000; >>>> + rep->bounding_box_depth_in_micrometers = 30000; >>>> + // LampArrayKindKeyboard, see "26.2.1 LampArrayKind Values" of "HID >>>> Usage Tables v1.5" >>> Limit length to 80 chars. >> is this just for comments or also code? >> >> because checkpatch explicitly allows 100 chars > For comments. For code you can use longer line lengths where they make > sense (doesn't mean that all lines should be tempting that limit which > is usually an indication that code should be structured differently). Ack > >>>> + } >>>> + >>>> + for (int j = i + 1; j < rep->lamp_count; ++j) { > The convention these days is to use unsigned int for loop variables that > are never supposed to be negative. Ack > >>>> + if (rep->lamp_id[i] == rep->lamp_id[j]) { >>>> + pr_debug("Duplicate lamp_id in >>>> lamp_multi_update_report. Skippng whole report!\n"); > Skipping > >>>> + return sizeof(struct >>>> lamp_multi_update_report_t); >>>> + } >>>> + } >>>> + } >>>> + >>>> + for (int i = 0; i < rep->lamp_count; ++i) { >>>> + if (driver_data->keyboard_type == >>>> WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) >>>> + key_id = sirius_16_ansii_kbl_mapping[rep->lamp_id[i]]; >>>> + else if (driver_data->keyboard_type == >>>> WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) >>>> + key_id = sirius_16_iso_kbl_mapping[rep->lamp_id[i]]; >>>> + >>>> + for (int j = 0; j < >>>> WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX; ++j) { >>>> + key_id_j = >>>> next->kbl_set_multiple_keys_input.lighting_settings[j].key_id; >>>> + if (key_id_j == 0x00 || key_id_j == key_id) { >>> Reverse condition and use continue to lower the indentation level of the >>> main loop body. >> Not sure if this helps with readability, at least for me i think that would >> take more time to parse the reversed condition. > ? > > if (key_id_j != 0x00 && key_id_j != key_id) > continue; > > The problem is not the condition itself but the indentation level in what > follows. Lowering that is going to be overall beneficial. > >>>> + if (key_id_j == 0x00) >>>> + >>>> next->kbl_set_multiple_keys_input.lighting_setting_count = >>>> + j + 1; > But now that I think of it more, you could also do: > if (key_id_j == 0x00) > next->... = j+1; > else if (key_id_j != key_id) > continue; Will look into it. > >>>> + >>>> next->kbl_set_multiple_keys_input.lighting_settings[j].key_id = >>>> + key_id; > You could also create local variable for > next->kbl_set_multiple_keys_input.lighting_settings[j] > to make this loop body more readable. > > Similar local vars might help elsewhere in your code too if you need to do > repeated accesses deep into the same structure. Ack > >>>> + // While this driver respects >>>> + // intensity_update_channel according to "HID >>>> + // Usage Tables v1.5" also on RGB leds, the >>>> + // Microsoft MacroPad reference implementation >>>> + // >>>> (https://github.com/microsoft/RP2040MacropadHidSample >>>> + // 1d6c3ad) does not and ignores it. If it >>>> turns >>>> + // out that Windows writes intensity = 0 for >>>> RGB >>>> + // leds instead of intensity = 255, this >>>> driver >>>> + // should also irgnore the > ignore Ack > >>>> + // intensity_update_channel. >>>> + >>>> next->kbl_set_multiple_keys_input.lighting_settings[j].red = >>>> + rep->update_channels[i].red >>>> + * >>>> rep->update_channels[i].intensity / 0xff; >>>> + >>>> next->kbl_set_multiple_keys_input.lighting_settings[j].green = >>>> + rep->update_channels[i].green >>>> + * >>>> rep->update_channels[i].intensity / 0xff; >>>> + >>>> next->kbl_set_multiple_keys_input.lighting_settings[j].blue = >>>> + rep->update_channels[i].blue >>>> + * >>>> rep->update_channels[i].intensity / 0xff; >>>> + >>>> + break; >>>> + } >>>> + } >>>> + } >>>> + >>>> + if (rep->lamp_update_flags & LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE) { >>>> + ret = tuxedo_nb04_wmi_496_b_in_80_b_out(wdev, >>>> WMI_AB_KBL_SET_MULTIPLE_KEYS, next, >>>> + &output); >>>> + memset(next, 0, sizeof(union >>>> tuxedo_nb04_wmi_496_b_in_80_b_out_input)); >>>> + if (ret) >>>> + return ret; >>>> + } >>>> + >>>> + return sizeof(struct lamp_multi_update_report_t); >>>> +} >>>> + >>>> + >>>> +struct __packed lamp_range_update_report_t { >>>> + const uint8_t report_id; >>>> + uint8_t lamp_update_flags; >>>> + uint16_t lamp_id_start; >>>> + uint16_t lamp_id_end; >>>> + uint8_t red_update_channel; >>>> + uint8_t green_update_channel; >>>> + uint8_t blue_update_channel; >>>> + uint8_t intensity_update_channel; >>>> +}; >>>> + >>>> +static int handle_lamp_range_update_report(struct hid_device *hdev, >>>> + struct lamp_range_update_report_t >>>> *report) >>>> +{ >>>> + struct driver_data_t *driver_data = hdev->driver_data; >>>> + int ret; >>>> + uint8_t lamp_count; >>>> + struct lamp_multi_update_report_t lamp_multi_update_report = { > No idea why chose to you make the local variable this long as you seem to > be fine using just "report" for naming the function parameter. Because i didn't thought to much about this variable name. > > How about taking e.g., the first chars from the words of the time, i.e., > lmur or some similar convention for local names? The type is there close > by for the code reader if one needs to know what the chars mean. tbh I realy don't like acronym variable names, will see if i find a better short name > >>>> + .report_id = LAMP_MULTI_UPDATE_REPORT_ID >>>> + }; >>>> + >>>> + // Catching missformated lamp_range_update_report and fail silently >>>> according to >>>> + // "HID Usage Tables v1.5" >>>> + if (report->lamp_id_start > report->lamp_id_end) { >>>> + pr_debug("lamp_id_start > lamp_id_end in >>>> lamp_range_update_report. Skippng whole report!\n"); >>>> + return sizeof(struct lamp_range_update_report_t); >>>> + } >>>> + >>>> + if (driver_data->keyboard_type == >>>> WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII) >>>> + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); >>>> + else if (driver_data->keyboard_type == >>>> WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO) >>>> + lamp_count = sizeof(sirius_16_ansii_kbl_mapping); >>>> + >>>> + if (report->lamp_id_end > lamp_count - 1) { >>>> + pr_debug("Out of bounds lamp_id_* in lamp_range_update_report. >>>> Skippng whole report!\n"); >>>> + return sizeof(struct lamp_range_update_report_t); >>>> + } >>>> + >>>> + // Break handle_lamp_range_update_report call down to multiple >>>> + // handle_lamp_multi_update_report calls to easily ensure that mixing >>>> + // handle_lamp_range_update_report and handle_lamp_multi_update_report >>>> + // does not break things. >>>> + for (int i = report->lamp_id_start; i < report->lamp_id_end + 1; i = i >>>> + 8) { >>>> + lamp_multi_update_report.lamp_count = MIN(report->lamp_id_end >>>> + 1 - i, 8); > Please use min() or min_t() instead of MIN(). ack > >>>> + if (i + lamp_multi_update_report.lamp_count == >>>> report->lamp_id_end + 1) >>>> + lamp_multi_update_report.lamp_update_flags |= >>>> + LAMP_UPDATE_FLAGS_LAMP_UPDATE_COMPLETE; >>>> + >>>> + for (int j = 0; j < lamp_multi_update_report.lamp_count; ++j) >>>> { >>>> + lamp_multi_update_report.lamp_id[j] = i + j; >>>> + lamp_multi_update_report.update_channels[j].red = >>>> + report->red_update_channel; >>>> + lamp_multi_update_report.update_channels[j].green = >>>> + report->green_update_channel; >>>> + lamp_multi_update_report.update_channels[j].blue = >>>> + report->blue_update_channel; >>>> + lamp_multi_update_report.update_channels[j].intensity >>>> = >>>> + report->intensity_update_channel; > Shorter local var name would help here to stay on a single line. If that's > not enough, local var for lmur->update_channels[j] would help further. will look into it > >>>> + } >>>> + >>>> + ret = handle_lamp_multi_update_report(hdev, >>>> &lamp_multi_update_report); >>>> + if (ret < 0) >>>> + return ret; >>>> + else if (ret != sizeof(struct lamp_multi_update_report_t)) >>>> + return -EIO; >>>> + } >>>> + >>>> + return sizeof(struct lamp_range_update_report_t); >>>> +} >>>> + >>>> + >>>> +struct __packed lamp_array_control_report_t { >>>> + const uint8_t report_id; >>>> + uint8_t autonomous_mode; >>>> +}; >>>> + >>>> +static int handle_lamp_array_control_report(struct hid_device >>>> __always_unused *hdev, >>>> + struct lamp_array_control_report_t >>>> __always_unused *rep) >>>> +{ >>>> + // The keyboard firmware doesn't have any built in effects or controls >>>> + // so this is a NOOP. >>>> + // According to the HID Documentation (HID Usage Tables v1.5) this >>>> + // function is optional and can be removed from the HID Report >>>> + // Descriptor, but it should first be confirmed that userspace >>>> respects >>>> + // this possibility too. The Microsoft MacroPad reference >>>> implementation >>>> + // (https://github.com/microsoft/RP2040MacropadHidSample 1d6c3ad) >>>> + // already deviates from the spec at another point, see >>>> + // handle_lamp_*_update_report. >>>> + >>>> + return sizeof(struct lamp_array_control_report_t); >>>> +} >>>> + >>>> + >>>> +static int ll_raw_request(struct hid_device *hdev, unsigned char >>>> reportnum, __u8 *buf, size_t len, >>>> + unsigned char rtype, int reqtype) >>>> +{ >>>> + int ret; >>>> + >>>> + ret = -EINVAL; >>>> + if (rtype == HID_FEATURE_REPORT) { >>> No, reverse the logic in the condition and return -EINVAL explicitly. >>> It lets you lower the indentation level of the normal path. >> I don't quite get what you mean, i have to check 3 levels: >> >> Feature Report? >> >> Get or Set Report? >> >> Report ID? >> >> I don't see how i can do this without code duplication or 3 levels of >> indendation? > if (rtype != HID_FEATURE_REPORT) > return -EINVAL; Sorry was a slowpoke on this one > > This already brings you down one indentation level and simplifies things > as you don't need to do ret = -EINVAL + return at the end. > >>>> + if (reqtype == HID_REQ_GET_REPORT) { >>>> + if (reportnum == LAMP_ARRAY_ATTRIBUTES_REPORT_ID >>>> + && len == sizeof(struct >>>> lamp_array_attributes_report_t)) >>>> + ret = handle_lamp_array_attributes_report( >>>> + hdev, (struct >>>> lamp_array_attributes_report_t *)buf); >>>> + else if (reportnum == >>>> LAMP_ATTRIBUTES_RESPONSE_REPORT_ID >>>> + && len == sizeof(struct >>>> lamp_attributes_response_report_t)) >>>> + ret = handle_lamp_attributes_response_report( >>>> + hdev, (struct >>>> lamp_attributes_response_report_t *)buf); >>>> + } else if (reqtype == HID_REQ_SET_REPORT) { >>>> + if (reportnum == LAMP_ATTRIBUTES_REQUEST_REPORT_ID >>>> + && len == sizeof(struct >>>> lamp_attributes_request_report_t)) >>>> + ret = handle_lamp_attributes_request_report( >>>> + hdev, (struct >>>> lamp_attributes_request_report_t *)buf); >>>> + else if (reportnum == LAMP_MULTI_UPDATE_REPORT_ID >>>> + && len == sizeof(struct >>>> lamp_multi_update_report_t)) >>>> + ret = handle_lamp_multi_update_report( >>>> + hdev, (struct >>>> lamp_multi_update_report_t *)buf); >>>> + else if (reportnum == LAMP_RANGE_UPDATE_REPORT_ID >>>> + && len == sizeof(struct >>>> lamp_range_update_report_t)) >>>> + ret = handle_lamp_range_update_report( >>>> + hdev, (struct >>>> lamp_range_update_report_t *)buf); >>>> + else if (reportnum == LAMP_ARRAY_CONTROL_REPORT_ID >>>> + && len == sizeof(struct >>>> lamp_array_control_report_t)) >>>> + ret = handle_lamp_array_control_report( >>>> + hdev, (struct >>>> lamp_array_control_report_t *)buf); >>>> + } >>> This is very messy, and should IMHO use switch&case and directly return >>> -EINVAL on every len check inside the case blocks. >> Wouldn't that mean more intendation? One for the switch case and another one >> for the now seperate len check? > No it doesn't add indentation level compared with yours and this is also > way easier to read: > > switch (reqtype) { > case HID_REQ_GET_REPORT: > switch (reportnum) { > case LAMP_ATTRIBUTES_REQUEST_REPORT_ID: > if (len != sizeof(struct lamp_array_attributes_report_t)) > return -EINVAL; > > return handle_lamp_array_attributes_report(hdev, (struct lamp_array_attributes_report_t *)buf); > case ...: > if (len != ...) > return -EINVAL; > > return ...; > default: > return -EINVAL; > } > > case HID_REQ_SET_REPORT: > switch (reportnum) { > case: > ... > default: > return -EINVAL; > } > default: > return -EINVAL; > } > } > > Compiler might be stupid enough to require a few additional breaks that > will never be reachable + return to the end of function so make those > tweaks as needed. Will look into it > > I'm sorry if I copy-pasted something from a wrong place in above but I > believe you get the point. The error handling is now clearly visible > instead of being build inside a complex if condition and returns > immediately to clearly show it's really doing error handling. > >>>> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_ab_virtual_lamp_array.h >>>> @@ -0,0 +1,18 @@ >>>> +/* SPDX-License-Identifier: GPL-2.0 */ >>>> +/* >>>> + * This code gives the built in RGB lighting of the TUXEDO NB04 devices a >>>> + * standardised interface, namely HID LampArray. >>>> + * >>>> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com >>>> + */ >>>> + >>>> +#ifndef TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H >>>> +#define TUXEDO_NB04_WMI_AB_VIRTUAL_LAMP_ARRAY_H >>>> + >>>> +#include <linux/wmi.h> >>>> +#include <linux/hid.h> >>>> + >>>> +int tuxedo_nb04_virtual_lamp_array_add_device(struct wmi_device *wdev, >>>> + struct hid_device **hdev_out); >>>> + >>>> +#endif >>>> diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c >>>> b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c >>>> new file mode 100644 >>>> index 0000000000000..a61b59d225f9f >>>> --- /dev/null >>>> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.c >>>> @@ -0,0 +1,82 @@ >>>> +// SPDX-License-Identifier: GPL-2.0 >>>> +/* >>>> + * This code gives functions to avoid code duplication while interacting >>>> with >>>> + * the TUXEDO NB04 wmi interfaces. >>>> + * >>>> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com >>> The usual custom is to put <> around email addresses. >> ok >>>> + */ >>>> + >>>> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt >>> Add all includes for the stuff you use below. >> also linux/wmi.h? or it it enough that that is in the directly associated .h >> file? > I'd prefer to see tham all here even if some "xx.h" does need them itself. > Only if some <yy.h> includes <zz.h> and that dependency is something that > is pretty much cast into stone, then including just yy.h is enough. > > Sadly the include-what-you-use clang tool is not there yet for the kernel > so it's all manual process currently depending on reviewers paying > attention to what headers are missing and which are extra. ack > >>>> +#include "tuxedo_nb04_wmi_ab_init.h" >>>> + >>>> +#include "tuxedo_nb04_wmi_util.h" >>>> + >>>> +static int __wmi_method_acpi_object_out(struct wmi_device *wdev, uint32_t >>>> wmi_method_id, >>>> + uint8_t *in, acpi_size in_len, union >>>> acpi_object **out) >>>> +{ >>>> + struct acpi_buffer acpi_buffer_in = { in_len, in }; >>>> + struct acpi_buffer acpi_buffer_out = { ACPI_ALLOCATE_BUFFER, NULL }; >>>> + >>>> + pr_debug("Evaluate WMI method: %u in:\n", wmi_method_id); >>>> + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, in, in_len); >>>> + >>>> + acpi_status status = wmidev_evaluate_method(wdev, 0, wmi_method_id, >>>> &acpi_buffer_in, >>>> + &acpi_buffer_out); >>>> + if (ACPI_FAILURE(status)) { >>>> + pr_err("Failed to evaluate WMI method.\n"); >>> You should use dev_err() instead of pr_err(). >> ok >>>> + return -EIO; >>>> + } >>>> + if (!acpi_buffer_out.pointer) { >>>> + pr_err("Unexpected empty out buffer.\n"); >>>> + return -ENODATA; >>>> + } >>>> + >>>> + *out = acpi_buffer_out.pointer; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int __wmi_method_buffer_out(struct wmi_device *wdev, uint32_t >>>> wmi_method_id, uint8_t *in, >>>> + acpi_size in_len, uint8_t *out, acpi_size >>>> out_len) >>>> +{ >>>> + int ret; >>>> + union acpi_object *acpi_object_out = NULL; >>> Reverse xmas tree order. >> ok >>>> + >>>> + ret = __wmi_method_acpi_object_out(wdev, wmi_method_id, in, in_len, >>>> &acpi_object_out); >>>> + if (ret) >>>> + return ret; >>>> + >>>> + if (acpi_object_out->type != ACPI_TYPE_BUFFER) { >>>> + pr_err("Unexpected out buffer type. Expected: %u Got: %u\n", >>>> ACPI_TYPE_BUFFER, >>>> + acpi_object_out->type); >>>> + kfree(acpi_object_out); >>>> + return -EIO; >>>> + } >>>> + if (acpi_object_out->buffer.length < out_len) { >>>> + pr_err("Unexpected out buffer length.\n"); >>>> + kfree(acpi_object_out); >>>> + return -EIO; >>> Duplicated error paths should use goto to handle rollback. >> ok >>>> + } >>>> + >>>> + memcpy(out, acpi_object_out->buffer.pointer, out_len); >>>> + kfree(acpi_object_out); >>>> + >>>> + return ret; >>>> +} >>>> + >>>> +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, >>>> + enum >>>> tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, >>>> + union >>>> tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, >>>> + union >>>> tuxedo_nb04_wmi_8_b_in_80_b_out_output *output) >>>> +{ >>>> + return __wmi_method_buffer_out(wdev, method, input->raw, 8, >>>> output->raw, 80); >>>> +} >>>> + >>>> +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, >>>> + enum >>>> tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, >>>> + union >>>> tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, >>>> + union >>>> tuxedo_nb04_wmi_496_b_in_80_b_out_output *output) >>>> +{ >>>> + return __wmi_method_buffer_out(wdev, method, input->raw, 496, >>>> output->raw, 80); >>>> +} >>>> diff --git a/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h >>>> b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h >>>> new file mode 100644 >>>> index 0000000000000..2765cbe9fcfef >>>> --- /dev/null >>>> +++ b/drivers/platform/x86/tuxedo/tuxedo_nb04_wmi_util.h >>>> @@ -0,0 +1,112 @@ >>>> +/* SPDX-License-Identifier: GPL-2.0 */ >>>> +/* >>>> + * This code gives functions to avoid code duplication while interacting >>>> with >>>> + * the TUXEDO NB04 wmi interfaces. >>>> + * >>>> + * Copyright (C) 2024 Werner Sembach wse@tuxedocomputers.com >>>> + */ >>>> + >>>> +#ifndef TUXEDO_NB04_WMI_UTIL_H >>>> +#define TUXEDO_NB04_WMI_UTIL_H >>>> + >>>> +#include <linux/wmi.h> >>>> + >>>> +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_TOUCHPAD 1 >>>> +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_KEYBOARD 2 >>>> +#define WMI_AB_GET_DEVICE_STATUS_DEVICE_ID_APP_PAGES 3 >>>> + >>>> +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_NONE 0 >>>> +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_PER_KEY 1 >>>> +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_FOUR_ZONE 2 >>>> +#define WMI_AB_GET_DEVICE_STATUS_KBL_TYPE_WHITE_ONLY 3 >>>> + >>>> +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ANSII 0 >>>> +#define WMI_AB_GET_DEVICE_STATUS_KEYBOARD_LAYOUT_ISO 1 >>>> + >>>> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_RED 1 >>>> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_GREEN 2 >>>> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_YELLOW 3 >>>> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_BLUE 4 >>>> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_PURPLE 5 >>>> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_INDIGO 6 >>>> +#define WMI_AB_GET_DEVICE_STATUS_COLOR_ID_WHITE 7 >>>> + >>>> +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_DASHBOARD BIT(0) >>>> +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_SYSTEMINFOS BIT(1) >>>> +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_KBL BIT(2) >>>> +#define WMI_AB_GET_DEVICE_STATUS_APP_PAGES_HOTKEYS BIT(3) >>> All these are quite long, I'd consider ways to make them shorter such as: >>> >>> DEVICE -> DEV >>> COLOR_ID -> COLOR >>> STATUS -> STS ? >>> KEYBOARD_LAYOUT -> KEY_LAYOUT or KEYBOARD -> KEYB (in general) >> These names match directly internal documentation, if it's no major problem i >> would like to keep the names for future reference. > I kind of assumed it might be the case, won't force you to do the > shortening but please realize it will make the code look more messy > because of the long line lengths, very long name are harder to read. > >>>> + struct __packed { >>> Unnecessary packed. >> if it's not harmfull i would like to keep it so I don't forget it when the >> reserved byts might be used sometime int the future > Packed has code generation impact so it is harmful at times. > >>>> + uint8_t device_type; >>>> + uint8_t reserved_0[7]; >>> Why isn't this just reserved[7] ? >> to match the name scheme of the other structs > Does it have to match? These are supposed to be dummy names that just > tell don't use/touch this field? yeah you might be right and that was just ocd talking or something xD > >>>> + } get_device_status_input; >>>> +}; >>>> + >>>> +union tuxedo_nb04_wmi_8_b_in_80_b_out_output { >>>> + uint8_t raw[80]; >>>> + struct __packed { >>> This too looks naturally aligned so packet is unnecessary. >> see above >>>> + uint16_t return_status; >>>> + uint8_t device_enabled; >>>> + uint8_t kbl_type; >>>> + uint8_t kbl_side_bar_supported; >>>> + uint8_t keyboard_physical_layout; >>>> + uint8_t app_pages; >>>> + uint8_t per_key_kbl_default_color; >>>> + uint8_t four_zone_kbl_default_color_1; >>>> + uint8_t four_zone_kbl_default_color_2; >>>> + uint8_t four_zone_kbl_default_color_3; >>>> + uint8_t four_zone_kbl_default_color_4; >>>> + uint8_t light_bar_kbl_default_color; >>>> + uint8_t reserved_0[1]; >>>> + uint16_t dedicated_gpu_id; >>>> + uint8_t reserved_1[64]; >>>> + } get_device_status_output; >>>> +}; >>>> + >>>> +enum tuxedo_nb04_wmi_8_b_in_80_b_out_methods { >>>> + WMI_AB_GET_DEVICE_STATUS = 2, >>>> +}; >>>> + >>>> + >>>> +#define WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX 120 >>>> + >>>> +union tuxedo_nb04_wmi_496_b_in_80_b_out_input { >>>> + uint8_t raw[496]; >>>> + struct __packed { >>>> + uint8_t reserved_0[15]; >>> reserved[15] ? >> see above >>>> + uint8_t lighting_setting_count; >>>> + struct { >>>> + uint8_t key_id; >>>> + uint8_t red; >>>> + uint8_t green; >>>> + uint8_t blue; >>>> + } >>>> lighting_settings[WMI_AB_KBL_SET_MULTIPLE_KEYS_LIGHTING_SETTINGS_COUNT_MAX]; >>>> + } kbl_set_multiple_keys_input; >>>> +}; >>>> + >>>> +union tuxedo_nb04_wmi_496_b_in_80_b_out_output { >>>> + uint8_t raw[80]; >>>> + struct __packed { >>>> + uint8_t return_value; >>>> + uint8_t reserved_0[79]; >>> reserved[79] ? >> see above >>>> + } kbl_set_multiple_keys_output; >>>> +}; >>>> + >>>> +enum tuxedo_nb04_wmi_496_b_in_80_b_out_methods { >>>> + WMI_AB_KBL_SET_MULTIPLE_KEYS = 6, >>>> +}; >>>> + >>>> + >>>> +int tuxedo_nb04_wmi_8_b_in_80_b_out(struct wmi_device *wdev, >>>> + enum >>>> tuxedo_nb04_wmi_8_b_in_80_b_out_methods method, >>>> + union >>>> tuxedo_nb04_wmi_8_b_in_80_b_out_input *input, >>>> + union >>>> tuxedo_nb04_wmi_8_b_in_80_b_out_output *output); >>>> +int tuxedo_nb04_wmi_496_b_in_80_b_out(struct wmi_device *wdev, >>>> + enum >>>> tuxedo_nb04_wmi_496_b_in_80_b_out_methods method, >>>> + union >>>> tuxedo_nb04_wmi_496_b_in_80_b_out_input *input, >>>> + union >>>> tuxedo_nb04_wmi_496_b_in_80_b_out_output *output); >>>> + >>>> +#endif >>> There are number of similar cases beyond those I've marked. Please go >>> through all the cases, not just the ones I marked for you. >>> >>> My general feel is that this driver is quite heavy to read which is likely >>> because of what feels excessively long naming used. I'm not convinved >>> being _that verbose_ adds enough value. >> When it comes down to the wmi structs I named stuff after the internal >> documentation for easy future reference. Everywhere else I shortened the names >> for everything that is static, but i can do a second pass. >>> E.g., right above you have tuxedo_nb04_wmi_8_b_in_80_b_out_methods which >>> mostly contains what looks prefix and some sizes. What is the value of >>> having those sizes in the name? It would be much more useful to name >>> things by functionality rather than sizes. >>> >> While i currently only implement 2 functions of that wmi api there are more >> and this interface is written with the intend to be easily expandable to the >> other functions in the future. >> >> That why i choose the rather generic names of just the input and output length >> because there is no semantic connection between the wmi methods in >> tuxedo_nb04_wmi_8_b_in_80_b_out and tuxedo_nb04_wmi_496_b_in_80_b_out >> respectively that would make for a good name. > So the only valuable characters are prefix + 8/496/80 the rest doesn't > really tell much despite all its characters :-). Details like which of the > numbers is in/out and that the numbers are in bytes could IMO be left to > struct's comment without loss of much information value. > tuxedo_nb04_wmi_8_80 kinda looks strange to me, what about tuxedo_nb04_wmi_8_in_80_out? but that's on 4 chars shorter. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-04 14:30 ` Werner Sembach @ 2024-10-04 14:46 ` Ilpo Järvinen 2024-10-07 16:17 ` Werner Sembach 0 siblings, 1 reply; 11+ messages in thread From: Ilpo Järvinen @ 2024-10-04 14:46 UTC (permalink / raw) To: Werner Sembach Cc: Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, pavel, cs, platform-driver-x86 [-- Attachment #1: Type: text/plain, Size: 2525 bytes --] On Fri, 4 Oct 2024, Werner Sembach wrote: > Am 03.10.24 um 12:54 schrieb Ilpo Järvinen: > > On Wed, 2 Oct 2024, Werner Sembach wrote: > > > Am 02.10.24 um 11:52 schrieb Ilpo Järvinen: > > > > On Tue, 1 Oct 2024, Werner Sembach wrote: > > > > > > > > > The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a > > > > > per-key > > > > > controllable RGB keyboard backlight. The firmware API for it is > > > > > implemented > > > > > via WMI. > > > > > > > > > > To make the backlight userspace configurable this driver emulates a > > > > > LampArray HID device and translates the input from hidraw to the > > > > > corresponding WMI calls. This is a new approach as the leds subsystem > > > > > lacks > > > > > a suitable UAPI for per-key keyboard backlights, and like this no new > > > > > UAPI > > > > > needs to be established. > > > > > > > > > > v2: Integrated Armins feedback and fixed kernel test robot warnings. > > > > > v3: Fixed borked subject line of v2. > > > > > v4: Remove unrequired WMI mutex. > > > > > Move device checking from probe to init. > > > > > Fix device checking working exactly reverse as it should. > > > > > Fix null pointer dereference because, hdev->driver_data != > > > > > hdev->dev.driver_data. > > > > > > > > > > Co-developed-by: Christoffer Sandberg <cs@tuxedo.de> > > > > > Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> > > > > > Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> > > > > > Link: > > > > > https://lore.kernel.org/all/1fb08a74-62c7-4d0c-ba5d-648e23082dcb@tuxedocomputers.com/ > > > > > --- > > > That why i choose the rather generic names of just the input and output > > > length > > > because there is no semantic connection between the wmi methods in > > > tuxedo_nb04_wmi_8_b_in_80_b_out and tuxedo_nb04_wmi_496_b_in_80_b_out > > > respectively that would make for a good name. > > So the only valuable characters are prefix + 8/496/80 the rest doesn't > > really tell much despite all its characters :-). Details like which of the > > numbers is in/out and that the numbers are in bytes could IMO be left to > > struct's comment without loss of much information value. > > > tuxedo_nb04_wmi_8_80 kinda looks strange to me, what about > tuxedo_nb04_wmi_8_in_80_out? but that's on 4 chars shorter. Perhaps just tuxedo_nb04_wmi_8in_80out ? I can see you like to use underscores a lot so I can understand if that feels a step too far :-) (no offence meant). -- i. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices 2024-10-04 14:46 ` Ilpo Järvinen @ 2024-10-07 16:17 ` Werner Sembach 0 siblings, 0 replies; 11+ messages in thread From: Werner Sembach @ 2024-10-07 16:17 UTC (permalink / raw) To: Ilpo Järvinen Cc: Hans de Goede, bentiss, dri-devel, jelle, jikos, lee, linux-input, LKML, linux-leds, miguel.ojeda.sandonis, ojeda, onitake, pavel, cs, platform-driver-x86 Am 04.10.24 um 16:46 schrieb Ilpo Järvinen: > On Fri, 4 Oct 2024, Werner Sembach wrote: >> Am 03.10.24 um 12:54 schrieb Ilpo Järvinen: >>> On Wed, 2 Oct 2024, Werner Sembach wrote: >>>> Am 02.10.24 um 11:52 schrieb Ilpo Järvinen: >>>>> On Tue, 1 Oct 2024, Werner Sembach wrote: >>>>> >>>>>> The TUXEDO Sirius 16 Gen1 and TUXEDO Sirius 16 Gen2 devices have a >>>>>> per-key >>>>>> controllable RGB keyboard backlight. The firmware API for it is >>>>>> implemented >>>>>> via WMI. >>>>>> >>>>>> To make the backlight userspace configurable this driver emulates a >>>>>> LampArray HID device and translates the input from hidraw to the >>>>>> corresponding WMI calls. This is a new approach as the leds subsystem >>>>>> lacks >>>>>> a suitable UAPI for per-key keyboard backlights, and like this no new >>>>>> UAPI >>>>>> needs to be established. >>>>>> >>>>>> v2: Integrated Armins feedback and fixed kernel test robot warnings. >>>>>> v3: Fixed borked subject line of v2. >>>>>> v4: Remove unrequired WMI mutex. >>>>>> Move device checking from probe to init. >>>>>> Fix device checking working exactly reverse as it should. >>>>>> Fix null pointer dereference because, hdev->driver_data != >>>>>> hdev->dev.driver_data. >>>>>> >>>>>> Co-developed-by: Christoffer Sandberg <cs@tuxedo.de> >>>>>> Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> >>>>>> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> >>>>>> Link: >>>>>> https://lore.kernel.org/all/1fb08a74-62c7-4d0c-ba5d-648e23082dcb@tuxedocomputers.com/ >>>>>> --- >>>> That why i choose the rather generic names of just the input and output >>>> length >>>> because there is no semantic connection between the wmi methods in >>>> tuxedo_nb04_wmi_8_b_in_80_b_out and tuxedo_nb04_wmi_496_b_in_80_b_out >>>> respectively that would make for a good name. >>> So the only valuable characters are prefix + 8/496/80 the rest doesn't >>> really tell much despite all its characters :-). Details like which of the >>> numbers is in/out and that the numbers are in bytes could IMO be left to >>> struct's comment without loss of much information value. >>> >> tuxedo_nb04_wmi_8_80 kinda looks strange to me, what about >> tuxedo_nb04_wmi_8_in_80_out? but that's on 4 chars shorter. > Perhaps just tuxedo_nb04_wmi_8in_80out ? ok > > I can see you like to use underscores a lot so I can understand if that > feels a step too far :-) (no offence meant). > ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2024-10-07 16:17 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-10-01 18:06 [RFC PATCH v4 0/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 Werner Sembach 2024-10-01 18:06 ` [RFC PATCH v4 1/1] platform/x86/tuxedo: Add virtual LampArray for TUXEDO NB04 devices Werner Sembach 2024-10-02 9:52 ` Ilpo Järvinen 2024-10-02 9:55 ` Pavel Machek 2024-10-02 10:01 ` Ilpo Järvinen 2024-10-02 10:05 ` Pavel Machek 2024-10-02 14:53 ` Werner Sembach 2024-10-03 10:54 ` Ilpo Järvinen 2024-10-04 14:30 ` Werner Sembach 2024-10-04 14:46 ` Ilpo Järvinen 2024-10-07 16:17 ` Werner Sembach
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).