linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>,
	markgross@kernel.org, ilpo.jarvinen@linux.intel.com,
	basavaraj.natikar@amd.com, jikos@kernel.org,
	benjamin.tissoires@redhat.com
Cc: Patil.Reddy@amd.com, mario.limonciello@amd.com,
	platform-driver-x86@vger.kernel.org, linux-input@vger.kernel.org
Subject: Re: [PATCH v6 11/15] platform/x86/amd/pmf: Add capability to sideload of policy binary
Date: Mon, 11 Dec 2023 09:59:28 +0100	[thread overview]
Message-ID: <a24a0460-333a-4eef-825f-3e614b936973@redhat.com> (raw)
In-Reply-To: <20231204101548.1458499-12-Shyam-sundar.S-k@amd.com>

Hi,

On 12/4/23 11:15, Shyam Sundar S K wrote:
> A policy binary is OS agnostic, and the same policies are expected to work
> across the OSes.  At times it becomes difficult to debug when the policies
> inside the policy binaries starts to misbehave. Add a way to sideload such
> policies independently to debug them via a debugfs entry.
> 
> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> ---
>  drivers/platform/x86/amd/pmf/pmf.h    |  1 +
>  drivers/platform/x86/amd/pmf/tee-if.c | 54 +++++++++++++++++++++++++++
>  2 files changed, 55 insertions(+)
> 
> diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
> index 593930519039..8712299ad52b 100644
> --- a/drivers/platform/x86/amd/pmf/pmf.h
> +++ b/drivers/platform/x86/amd/pmf/pmf.h
> @@ -219,6 +219,7 @@ struct amd_pmf_dev {
>  	bool cnqf_supported;
>  	struct notifier_block pwr_src_notifier;
>  	/* Smart PC solution builder */
> +	struct dentry *esbin;
>  	unsigned char *policy_buf;
>  	u32 policy_sz;
>  	struct tee_context *tee_ctx;
> diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
> index 5f10e5c6335e..f73663c629fe 100644
> --- a/drivers/platform/x86/amd/pmf/tee-if.c
> +++ b/drivers/platform/x86/amd/pmf/tee-if.c
> @@ -8,6 +8,7 @@
>   * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
>   */
>  
> +#include <linux/debugfs.h>
>  #include <linux/tee_drv.h>
>  #include <linux/uuid.h>
>  #include "pmf.h"
> @@ -16,9 +17,14 @@
>  
>  /* Policy binary actions sampling frequency (in ms) */
>  static int pb_actions_ms = MSEC_PER_SEC;
> +/* Sideload policy binaries to debug policy failures */
> +static bool pb_side_load;
> +
>  #ifdef CONFIG_AMD_PMF_DEBUG
>  module_param(pb_actions_ms, int, 0644);
>  MODULE_PARM_DESC(pb_actions_ms, "Policy binary actions sampling frequency (default = 1000ms)");
> +module_param(pb_side_load, bool, 0444);
> +MODULE_PARM_DESC(pb_side_load, "Sideload policy binaries debug policy failures");
>  #endif
>  
>  static const uuid_t amd_pmf_ta_uuid = UUID_INIT(0x6fd93b77, 0x3fb8, 0x524d,
> @@ -269,6 +275,48 @@ static int amd_pmf_start_policy_engine(struct amd_pmf_dev *dev)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_AMD_PMF_DEBUG
> +static ssize_t amd_pmf_get_pb_data(struct file *filp, const char __user *buf,
> +				   size_t length, loff_t *pos)
> +{
> +	struct amd_pmf_dev *dev = filp->private_data;
> +	int ret;
> +
> +	/* Policy binary size cannot exceed POLICY_BUF_MAX_SZ */
> +	if (length > POLICY_BUF_MAX_SZ || length == 0)
> +		return -EINVAL;
> +
> +	dev->policy_sz = length;
> +	if (copy_from_user(dev->policy_buf, buf, dev->policy_sz))
> +		return -EFAULT;

dev->policy_buf = allocated in amd_pmf_get_bios_buffer() to
be of the original dev->policy_sz. So this needs to re-alloc
dev->policy_buf to make sure it is large enough.

Regards,

Hans




> +
> +	ret = amd_pmf_start_policy_engine(dev);
> +	if (ret)
> +		return -EINVAL;
> +
> +	return length;
> +}
> +
> +static const struct file_operations pb_fops = {
> +	.write = amd_pmf_get_pb_data,
> +	.open = simple_open,
> +};
> +
> +static void amd_pmf_open_pb(struct amd_pmf_dev *dev, struct dentry *debugfs_root)
> +{
> +	dev->esbin = debugfs_create_dir("pb", debugfs_root);
> +	debugfs_create_file("update_policy", 0644, dev->esbin, dev, &pb_fops);
> +}
> +
> +static void amd_pmf_remove_pb(struct amd_pmf_dev *dev)
> +{
> +	debugfs_remove_recursive(dev->esbin);
> +}
> +#else
> +static void amd_pmf_open_pb(struct amd_pmf_dev *dev, struct dentry *debugfs_root) {}
> +static void amd_pmf_remove_pb(struct amd_pmf_dev *dev) {}
> +#endif
> +
>  static int amd_pmf_get_bios_buffer(struct amd_pmf_dev *dev)
>  {
>  	dev->policy_buf = kzalloc(dev->policy_sz, GFP_KERNEL);
> @@ -281,6 +329,9 @@ static int amd_pmf_get_bios_buffer(struct amd_pmf_dev *dev)
>  
>  	memcpy(dev->policy_buf, dev->policy_base, dev->policy_sz);
>  
> +	if (pb_side_load)
> +		amd_pmf_open_pb(dev, dev->dbgfs_dir);
> +
>  	return amd_pmf_start_policy_engine(dev);
>  }
>  
> @@ -382,6 +433,9 @@ int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
>  
>  void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev)
>  {
> +	if (pb_side_load)
> +		amd_pmf_remove_pb(dev);
> +
>  	kfree(dev->prev_data);
>  	kfree(dev->policy_buf);
>  	cancel_delayed_work_sync(&dev->pb_work);


  reply	other threads:[~2023-12-11  8:59 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-04 10:15 [PATCH v6 00/15] Introduce PMF Smart PC Solution Builder Feature Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 01/15] platform/x86/amd/pmf: Add PMF TEE interface Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 02/15] platform/x86/amd/pmf: Add support for PMF-TA interaction Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 03/15] platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr() Shyam Sundar S K
2023-12-11  8:40   ` Hans de Goede
2023-12-11 15:15     ` Shyam Sundar S K
2023-12-11 15:55       ` Hans de Goede
2023-12-11 16:35         ` Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 04/15] platform/x86/amd/pmf: Add support for PMF Policy Binary Shyam Sundar S K
2023-12-04 19:05   ` Mario Limonciello
2023-12-11  8:53   ` Hans de Goede
2023-12-04 10:15 ` [PATCH v6 05/15] platform/x86/amd/pmf: change amd_pmf_init_features() call sequence Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 06/15] platform/x86/amd/pmf: Add support to get inputs from other subsystems Shyam Sundar S K
2023-12-04 19:03   ` Mario Limonciello
2023-12-04 10:15 ` [PATCH v6 07/15] platform/x86/amd/pmf: Add support update p3t limit Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 08/15] platform/x86/amd/pmf: Add support to update system state Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 09/15] platform/x86/amd/pmf: Make source_as_str() as non-static Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 10/15] platform/x86/amd/pmf: Add facility to dump TA inputs Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 11/15] platform/x86/amd/pmf: Add capability to sideload of policy binary Shyam Sundar S K
2023-12-11  8:59   ` Hans de Goede [this message]
2023-12-04 10:15 ` [PATCH v6 12/15] platform/x86/amd/pmf: dump policy binary data Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 13/15] HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int() Shyam Sundar S K
2023-12-04 19:02   ` Mario Limonciello
2023-12-04 10:15 ` [PATCH v6 14/15] platform/x86/amd/pmf: Add PMF-AMDSFH interface for HPD Shyam Sundar S K
2023-12-04 19:02   ` Mario Limonciello
2023-12-11  9:07   ` Hans de Goede
2023-12-04 10:15 ` [PATCH v6 15/15] platform/x86/amd/pmf: Add PMF-AMDSFH interface for ALS Shyam Sundar S K
2023-12-11  9:15   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a24a0460-333a-4eef-825f-3e614b936973@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=Patil.Reddy@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=basavaraj.natikar@amd.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=markgross@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).