From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org
Subject: [git pull] Input updates for v6.20-rc0
Date: Sat, 14 Feb 2026 19:39:37 -0800 [thread overview]
Message-ID: <aZE_tkCsDuCAH3Ux@google.com> (raw)
Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git tags/input-for-v7.0-rc0
to receive updates for the input subsystem. You will get:
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups.
Changelog:
---------
Andreas Kemnade (2):
Input: twl4030 - add TWL603x power button
Input: twl4030 - fix warnings without CONFIG_OF
Andy Shevchenko (19):
Input: dynapro - switch to use scnprintf() to suppress truncation warning
Input: egalax_ts_serial - switch to use scnprintf() to suppress truncation warning
Input: elo - switch to use scnprintf() to suppress truncation warning
Input: gunze - switch to use scnprintf() to suppress truncation warning
Input: hampshire - switch to use scnprintf() to suppress truncation warning
Input: fujitsu_ts - switch to use scnprintf() to suppress truncation warning
Input: inexio - switch to use scnprintf() to suppress truncation warning
Input: mtouch - switch to use scnprintf() to suppress truncation warning
Input: penmount - switch to use scnprintf() to suppress truncation warning
Input: touchit213 - switch to use scnprintf() to suppress truncation warning
Input: touchright - switch to use scnprintf() to suppress truncation warning
Input: touchwin - switch to use scnprintf() to suppress truncation warning
Input: tsc40 - switch to use scnprintf() to suppress truncation warning
Input: wdt87xx_i2c - switch to use dev_err_probe()
Input: gpio_decoder - make use of device properties
Input: gpio_decoder - unify messages with help of dev_err_probe()
Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep()
Input: gpio_decoder - make use of the macros from bits.h
Input: gpio_decoder - don't use "proxy" headers
Daniel Peng (2):
dt-bindings: input: i2c-hid: Introduce FocalTech FT8112
HID: i2c-hid: Add FocalTech FT8112
David Heidelberg (1):
Input: stmfts - correct wording for the warning message
Dmitry Torokhov (4):
Input: ilitek_ts_i2c - switch mdelay() to fsleep()
Input: synaptics_i2c - switch to using managed resources
Input: appletouch - fix potential race between resume and open
Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys
Fabio Baltieri (1):
Input: cros_ec_keyb - clarify key event error message
Gianluca Boiano (1):
Input: novatek-nvt-ts - drop wake_type check
Josua Mayer (1):
Input: ilitek_ts_i2c - fix warning with gpio controllers that sleep
Kuan-Wei Chiu (1):
dt-bindings: input: google,goldfish-events-keypad: Convert to DT schema
Lukas Bulwahn (1):
MAINTAINERS: adjust file entry in HIMAX HX83112B TOUCHSCREEN SUPPORT
Marco Crivellari (4):
Input: gpio_keys - replace use of system_wq with system_dfl_wq
Input: palmas-pwrbutton - replace use of system_wq with system_dfl_wq
Input: synaptics_i2c - replace use of system_wq with system_dfl_wq
Input: psmouse-smbus - add WQ_UNBOUND to alloc_workqueue user
Marek Vasut (3):
Input: ili210x - convert to dev_err_probe()
dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek
Input: ili210x - add support for polling mode
Micah Ostrow (1):
Input: apbps2 - fix comment style and typos
Minseong Kim (1):
Input: synaptics_i2c - guard polling restart in resume
Petr Hodina (2):
Input: stmfts - make comments correct
Input: stmfts - use sysfs_emit() instead of sprintf()
Rakesh Kota (1):
dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU
Raymond Hackley (1):
dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038
Rob Herring (Arm) (1):
dt-bindings: input: touchscreen: sitronix,st1232: Add Sitronix ST1624
Sakari Ailus (3):
Input: omap4-keypad - remove redundant pm_runtime_mark_last_busy() calls
Input: cs40l50 - remove redundant pm_runtime_mark_last_busy() calls
Input: cyapa - remove redundant pm_runtime_mark_last_busy() calls
Svyatoslav Ryhel (1):
dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'
Vaibhav Gupta (1):
Input: pf1550 - remove "defined but unused" warning
Vivek BalachandharTN (1):
Input: byd - use %*ph for Z packet dump
Vladimir Zapolskiy (1):
Input: adp5589 - remove a leftover header file
Wentong Tian (1):
Input: serio - complete sizeof(*pointer) conversions
Yedaya Katsman (2):
dt-bindings: input: touchscreen: edt-ft5x06: Add FocalTech FT3518
Input: edt-ft5x06 - add support for FocalTech FT3518
Diffstat:
--------
.../devicetree/bindings/goldfish/events.txt | 17 --
.../bindings/input/focaltech,ft8112.yaml | 66 ++++++
.../input/google,goldfish-events-keypad.yaml | 41 ++++
.../bindings/input/qcom,pm8941-pwrkey.yaml | 17 +-
.../bindings/input/touchscreen/edt-ft5x06.yaml | 1 +
.../bindings/input/touchscreen/ilitek,ili210x.yaml | 51 +++++
.../input/touchscreen/imagis,ist3038c.yaml | 4 +-
.../input/touchscreen/sitronix,st1232.yaml | 10 +-
.../bindings/input/touchscreen/ti,tsc2007.yaml | 3 +
.../bindings/input/touchscreen/trivial-touch.yaml | 4 -
MAINTAINERS | 2 +-
drivers/hid/i2c-hid/i2c-hid-of-elan.c | 8 +
drivers/input/keyboard/cros_ec_keyb.c | 3 +-
drivers/input/keyboard/gpio_keys.c | 19 +-
drivers/input/keyboard/omap4-keypad.c | 4 -
drivers/input/misc/cs40l50-vibra.c | 4 -
drivers/input/misc/gpio_decoder.c | 74 ++++---
drivers/input/misc/palmas-pwrbutton.c | 2 +-
drivers/input/misc/pf1550-onkey.c | 2 +-
drivers/input/misc/twl4030-pwrbutton.c | 67 ++++++-
drivers/input/mouse/appletouch.c | 9 +-
drivers/input/mouse/byd.c | 6 +-
drivers/input/mouse/cyapa.c | 3 -
drivers/input/mouse/cyapa_gen5.c | 1 -
drivers/input/mouse/psmouse-smbus.c | 2 +-
drivers/input/mouse/synaptics_i2c.c | 223 +++++++++------------
drivers/input/serio/altera_ps2.c | 2 +-
drivers/input/serio/apbps2.c | 14 +-
drivers/input/serio/arc_ps2.c | 3 +-
drivers/input/serio/olpc_apsp.c | 2 +-
drivers/input/touchscreen/dynapro.c | 4 +-
drivers/input/touchscreen/edt-ft5x06.c | 6 +
drivers/input/touchscreen/egalax_ts_serial.c | 3 +-
drivers/input/touchscreen/elo.c | 2 +-
drivers/input/touchscreen/fujitsu_ts.c | 3 +-
drivers/input/touchscreen/gunze.c | 2 +-
drivers/input/touchscreen/hampshire.c | 4 +-
drivers/input/touchscreen/ili210x.c | 96 +++++----
drivers/input/touchscreen/ilitek_ts_i2c.c | 10 +-
drivers/input/touchscreen/inexio.c | 2 +-
drivers/input/touchscreen/mtouch.c | 2 +-
drivers/input/touchscreen/novatek-nvt-ts.c | 5 -
drivers/input/touchscreen/penmount.c | 2 +-
drivers/input/touchscreen/stmfts.c | 21 +-
drivers/input/touchscreen/touchit213.c | 4 +-
drivers/input/touchscreen/touchright.c | 2 +-
drivers/input/touchscreen/touchwin.c | 2 +-
drivers/input/touchscreen/tsc40.c | 2 +-
drivers/input/touchscreen/wdt87xx_i2c.c | 14 +-
include/linux/input/adp5589.h | 180 -----------------
50 files changed, 518 insertions(+), 512 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/goldfish/events.txt
create mode 100644 Documentation/devicetree/bindings/input/focaltech,ft8112.yaml
create mode 100644 Documentation/devicetree/bindings/input/google,goldfish-events-keypad.yaml
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek,ili210x.yaml
delete mode 100644 include/linux/input/adp5589.h
Thanks.
--
Dmitry
next reply other threads:[~2026-02-15 3:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-15 3:39 Dmitry Torokhov [this message]
2026-02-15 16:57 ` [git pull] Input updates for v6.20-rc0 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aZE_tkCsDuCAH3Ux@google.com \
--to=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox