From: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
To: Quentin Schulz <quentin.schulz@cherry.de>,
Jakob Unterwurzacher <jakobunt@gmail.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Joseph Chen <chenjh@rock-chips.com>, Lee Jones <lee@kernel.org>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-input@vger.kernel.org, mfd@lists.linux.dev,
devicetree@vger.kernel.org
Subject: Re: [PATCH 0/4] Suspend-to-RAM fixes for RK3588 + SPI-connected RK806 PMIC, enable PMIC sleep on RK3588 Tiger
Date: Thu, 19 Nov 2026 10:12:49 +0100 [thread overview]
Message-ID: <af94a18e-cb7e-4319-95e3-0df120f730dd@cherry.de> (raw)
In-Reply-To: <a220ebd0-a28d-44cc-9a80-62382018348c@cherry.de>
Hi Quentin, thanks for looking at this!
On 10/29/26 20:31, Quentin Schulz wrote:
> Hi Jakob,
>
> On 10/29/26 11:06 AM, Jakob Unterwurzacher wrote:
>> This series, together with a few out-of-tree patches (see below), makes
>> suspend-to-RAM on RK3588-Tiger work, down to a power consumption of
>> about 0.4 W. Patches 1-3 apply to all boards with an RK806 PMIC
>> connected via SPI, which includes most RK3588 boards.
>>
>> Patch 1 ("Input: rk805-pwrkey - enable the wakeup interrupt during
>> system suspend")
>> arms the power key interrupt as a wakeup source, so that the
>> power key can wake up the system. This is done in the regular suspend
>> phase, because the SPI bus to the PMIC can no longer be used in the
>> noirq phase.
>>
>> Patch 2 ("mfd: rk8xx-core: keep the PMIC interrupt disabled during
>> system suspend")
>> keeps the PMIC interrupt disabled across system suspend, so that its
>> handler does not run before the bus to the PMIC has resumed.
>>
>> Patch 3 ("mfd: rk8xx-spi: add system sleep PM ops")
>> hooks up the existing rk8xx suspend/resume callbacks for the SPI
>> variant, which so far lacked them.
>>
>> Patch 4 ("arm64: dts: rockchip: put the PMIC into sleep mode in
>> suspend on RK3588 Tiger")
>> configures the RK806 PWRCTRL1 pin on RK3588 Tiger for its sleep
>> function, so that the regulator suspend states take effect. This lowers
>> the module's power consumption in suspend-to-RAM from 1.09 W to 0.43 W.
>>
>> The patches do not depend on each other and can be applied through
>> their respective trees.
>>
>
> Then have them in separate series. Series should be as small as
> possible, down to a single commit if possible.
I'll split it into tree (1, 2+3, 4).
>> 1) Upstream TF-A does not complete suspend-to-RAM on this board yet,
>> so the
>> tests used Rockchip's BL31 (rkbin v1.47), configured through a small
>> out-of-tree driver. The plan is to get suspend working in TF-A instead.
>>
>
> I'm guessing you(r LLM) meant upstream TF-A here? Or what is it that you
> mean?
Yes, both my LLM and me meant upstream TF-A.
>> 2) The inno-usb2 PHY has to be resumed when its 480 MHz clock is enabled,
>> otherwise EHCI/OHCI resume hangs. This is addressed by Sebastian
>> Reichel's inno-usb2 series [1].
>>
>
> Having access to your downstream branch, you have a patch generated by
> your LLM and not Sebastian's patch series. Either use what Sebastian
> posted, or be more careful in your choice of words as I read the above
> as implying you used his series.
I have now pulled in Sebastian's patch series instead and posted a
Tested-By (
https://lore.kernel.org/lkml/ae532396-557b-4a0b-b13c-920a971962b8@cherry.de/
).
>> Known issues
>> ------------
>>
>> PCIe devices do not survive resume; this depends on system PM
>> support in pcie-dw-rockchip [2].
>>
>> [2] https://eur02.safelinks.protection.outlook.com/?
>> url=https%3A%2F%2Flore.kernel.org%2Fr%2F20260316-rockchip-pcie-system-
>> suspend-
>> v5-0-5bb5ad37d643%40collabora.com&data=05%7C02%7Cjakob.unterwurzacher%40cherry.de%7C464ac9f060054aad6eb808df35f33f19%7C5e0e1b5221b54e7b83bb514ec460677e%7C0%7C0%7C639288990982194241%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=cg2d38YMtjlOG4gFsyy7LYI%2FWi4RFRUuHL8QjVL0DJg%3D&reserved=0
>>
>
> There already is a v6 from almost two months ago. Did you actually test
> with the v5 or are you just hinting at what could be helping resume PCIe
> devices?
>
> I'm sure Sebastian would be happy to receive a nice Tested-by tag if you
> did indeed test that.
I was just hinting.
It was merged in the meantime (
https://lore.kernel.org/linux-pci/179407115382.87267.12160393716568806842.b4-ty@b4/
) and I have now also pulled it into my local tree. It solves the problem.
> All your patches are missing the Signed-off-by, required to signify
> DCO[1]. LLMs are forbidden to add it, so I guess you missed that when
> reviewing the patches before sending. Please triple check that you agree
> to all criteria listed in the documentation before adding the SoB to
> patches generated by LLMs[2].
Well, that's embarrassing.
"b4 prep --check" came back clean, so I assumed that b4 adds the
Signed-off-by.
But, as it turns out, "b4 prep --check" does not actually work.
I have reported this as
https://lore.kernel.org/all/a37b228f-0d12-4c26-b29b-51ad59bc6d1a@cherry.de/
.
Thanks for the links, I have triple-checked.
Best regards,
Jakob
prev parent reply other threads:[~2026-11-19 9:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-29 10:06 [PATCH 0/4] Suspend-to-RAM fixes for RK3588 + SPI-connected RK806 PMIC, enable PMIC sleep on RK3588 Tiger Jakob Unterwurzacher
2026-10-29 10:06 ` [PATCH 1/4] Input: rk805-pwrkey - enable the wakeup interrupt during system suspend Jakob Unterwurzacher
2026-11-12 0:25 ` Dmitry Torokhov
2026-10-29 10:06 ` [PATCH 2/4] mfd: rk8xx-core: keep the PMIC interrupt disabled " Jakob Unterwurzacher
2026-10-29 10:21 ` sashiko-bot
2026-10-29 10:06 ` [PATCH 3/4] mfd: rk8xx-spi: add system sleep PM ops Jakob Unterwurzacher
2026-10-29 10:06 ` [PATCH 4/4] arm64: dts: rockchip: put the PMIC into sleep mode in suspend on RK3588 Tiger Jakob Unterwurzacher
2026-10-29 19:31 ` [PATCH 0/4] Suspend-to-RAM fixes for RK3588 + SPI-connected RK806 PMIC, enable PMIC sleep " Quentin Schulz
2026-11-12 0:03 ` Sebastian Reichel
2026-11-19 9:12 ` Jakob Unterwurzacher [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=af94a18e-cb7e-4319-95e3-0df120f730dd@cherry.de \
--to=jakob.unterwurzacher@cherry.de \
--cc=chenjh@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=heiko@sntech.de \
--cc=jakobunt@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mfd@lists.linux.dev \
--cc=quentin.schulz@cherry.de \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox