From: Jebediah Huang <jebediah.huang@gmail.com>
To: Eric Miao <eric.y.miao@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org
Subject: Re: Using PXA arm board with MAX7319 GPIO expander input
Date: Mon, 8 Feb 2010 15:02:14 +0800 [thread overview]
Message-ID: <bf0eec9a1002072302w1e81cc6bkd994c3efaab4d51d@mail.gmail.com> (raw)
In-Reply-To: <f17812d71002072202x2fb620c3hf4c3bbf6dc78aa78@mail.gmail.com>
On Mon, Feb 8, 2010 at 2:02 PM, Eric Miao <eric.y.miao@gmail.com> wrote:
> On Mon, Feb 8, 2010 at 1:44 PM, Jebediah Huang <jebediah.huang@gmail.com> wrote:
>> static struct i2c_board_info i2c_board_info[] =
>> {
>> {
>> .type = "max7319",
>> .addr = 0x6C,
>> .irq = IRQ_GPIO(105),
>
> This doesn't look correct, if max7319 is ever able to interrupt the host
> CPU, this should be something other than SDA.
Thank you. I remove irq now. It is not used.
>
> However, this isn't supposed to be the reason for the failure. The
> failure looks like an I2C communication issue to me, which means:
>
> 1. the i2c host driver isn't setup correctly
> 2. pin setup
> 3. max7319 power supply and chip select
> 4. i2c bus (incorrect pull-up/down etc)
> 5. i2c device address
>
> I'd recommend an oscilloscope/LA for the I2C protocol on the lines
> to identify the real issue.
>
I test hardware is ok. I test with this:
{
int fd, t;
int i;
char buf[512];
fd = open("/dev/i2c-0", O_RDWR);
printf("fd=%d\n",fd);
t = ioctl(fd, I2C_SLAVE, 0x6c);
printf("t=%d\n",t);
memset(buf,0,512);
t = read(fd,buf,512);
printf("t=%d\n",t);
for(i=0;i<t;i++) {
printf("0x%x,",buf[i]);
}
printf("\n");
exit(0);
}
output if max732x enabled is:
# ./i2ctest
[ 184.070025] i2c: error: exhausted retries
fd=3
t=-1
[ 184.074256] i2c: msg_num: 0 msg_idx: -2000 msg_ptr: 0
[ 184.080428] i2c: ICR: 000007e0 ISR: 00000002
[ 184.080444] i2c: log: [00000006:00000000] [00000006:00000000]
[00000006:00000000] [00000006:00000000] [00000006:00000000]
[00000006:00000000] [00000006:00
000000] [00000006:00000000] [00000006:00000000] [00000006:00000000]
[00000006:00000000] [00000007:00000000] [00000447:000007e0]
t=-1
disable max732x is:
# ./i2ctest no button pressed
fd=3
t=0
t=512
0xff,0x8,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff
,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0
,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xf
f,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x
0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0x
ff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0
x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0
xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,
0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,
0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff
,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0
,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xf
f,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x
0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0x
ff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,0xff,0x0,
# ./i2ctest 2 button pressed
fd=3
t=0
t=512
0x7f,0x80,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7
f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x
0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x
7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0
x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0
x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,
0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,
0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f
,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0
,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7
f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x
0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x
7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0
x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0
x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,
I think problem is my setup max732x failure.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-02-08 7:02 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-08 5:44 Using PXA arm board with MAX7319 GPIO expander input Jebediah Huang
2010-02-08 6:02 ` Eric Miao
2010-02-08 7:02 ` Jebediah Huang [this message]
2010-02-08 7:36 ` Daniel Mack
2010-02-08 7:56 ` Jebediah Huang
2010-02-08 11:08 ` Jebediah Huang
2010-02-08 11:33 ` Daniel Mack
2010-02-08 12:32 ` Marc Zyngier
2010-02-08 13:04 ` Daniel Mack
2010-02-09 1:05 ` Eric Miao
2010-02-09 7:39 ` Marc Zyngier
2010-02-09 8:19 ` Eric Miao
2010-02-09 10:22 ` Marc Zyngier
2010-02-09 1:07 ` Eric Miao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bf0eec9a1002072302w1e81cc6bkd994c3efaab4d51d@mail.gmail.com \
--to=jebediah.huang@gmail.com \
--cc=eric.y.miao@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).