From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jebediah Huang <jebediah.huang@gmail.com>
Subject: Re: Using PXA arm board with MAX7319 GPIO expander input
Date: Mon, 8 Feb 2010 19:08:06 +0800
Message-ID: <bf0eec9a1002080308v77c9c026j302767e41cd660f2@mail.gmail.com>
References: <bf0eec9a1002072144n461e5894m8993bfd4e8f49e9b@mail.gmail.com>
	 <f17812d71002072202x2fb620c3hf4c3bbf6dc78aa78@mail.gmail.com>
	 <bf0eec9a1002072302w1e81cc6bkd994c3efaab4d51d@mail.gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Return-path: <linux-input-owner@vger.kernel.org>
Received: from mail-fx0-f211.google.com ([209.85.220.211]:55381 "EHLO
	mail-fx0-f211.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1751221Ab0BHLII (ORCPT
	<rfc822;linux-input@vger.kernel.org>); Mon, 8 Feb 2010 06:08:08 -0500
Received: by fxm3 with SMTP id 3so7447748fxm.39
        for <linux-input@vger.kernel.org>; Mon, 08 Feb 2010 03:08:06 -0800 (PST)
In-Reply-To: <bf0eec9a1002072302w1e81cc6bkd994c3efaab4d51d@mail.gmail.com>
Sender: linux-input-owner@vger.kernel.org
List-Id: linux-input@vger.kernel.org
To: Eric Miao <eric.y.miao@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org

On Mon, Feb 8, 2010 at 3:02 PM, Jebediah Huang <jebediah.huang@gmail.com> wrote:
>
> # ./i2ctest 2 button pressed
> fd=3
> t=0
> t=512
> 0x7f,0x80,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7
> f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x
> 0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x
> 7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0
> x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0
> x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,
> 0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,
> 0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f
> ,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0
> ,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7
> f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x
> 0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x
> 7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0
> x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0
> x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,0x7f,0x0,
>
> I think problem is my setup max732x failure.
>

Is it correct that max732x driver will take i2c configuration from my
setup info and make each max7319 input signel into a gpio?

Hardware work correctly because without max732x driver, above i2c-dev
code can read max7319 input signel. Configuration is correct.

gpio_base is starting where max732x driver will add new gpio number
for max7319 signel.

static struct max732x_platform_data max7319_data[] = {
       [0] = {
               .gpio_base      =  NR_BUILTIN_GPIO,
       },
};

static struct i2c_board_info i2c_board_info[] =
{
       {
               .type           = "max7319",
               .addr           = 0x6C,
               .irq            = IRQ_GPIO(125), <= this is my irq pin
for max7319 INT_N
               .platform_data  = &max7319_data[0],
       },
};

static unsigned long peony_pin_config[] __initdata = {
       /* i2c bus */
       GPIO105_CI2C_SDA,
       GPIO106_CI2C_SCL,
} <= this correct because i2c-dev can work.

Is my understanding wrong?