Re: [PATCH v1] Input: elants_i2c - fix division by zero if firmware reports zero phys size

[Dmitry Osipenko <digetx@gmail.com>]

02.03.2021 13:08, Dmitry Osipenko пишет:
> Touchscreen firmware of ASUS Transformer TF700T reports zeros for the phys
> size. Hence check whether the size is zero and don't set the resolution in
> this case.
> 
> Reported-by: Jasper Korten <jja2000@gmail.com>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> 
> Please note that ASUS TF700T isn't yet supported by upstream kernel,
> hence this is not a critical fix.
> 
>  drivers/input/touchscreen/elants_i2c.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
> index 4c2b579f6c8b..a2e1cc4192b0 100644
> --- a/drivers/input/touchscreen/elants_i2c.c
> +++ b/drivers/input/touchscreen/elants_i2c.c
> @@ -1441,14 +1441,16 @@ static int elants_i2c_probe(struct i2c_client *client,
>  
>  	touchscreen_parse_properties(ts->input, true, &ts->prop);
>  
> -	if (ts->chip_id == EKTF3624) {
> +	if (ts->chip_id == EKTF3624 && ts->phy_x && ts->phy_y) {
>  		/* calculate resolution from size */
>  		ts->x_res = DIV_ROUND_CLOSEST(ts->prop.max_x, ts->phy_x);
>  		ts->y_res = DIV_ROUND_CLOSEST(ts->prop.max_y, ts->phy_y);
>  	}
>  
> -	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
> -	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
> +	if (ts->x_res > 0)
> +		input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
> +	if (ts->y_res > 0)
> +		input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
>  	if (ts->major_res > 0)
>  		input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, ts->major_res);
>  
> 

Hi,

This is a very minor fix, but still will be nice if we could get it into
5.13 in order to have one less patch to care about. Thanks in advance!