* [PATCH v10 0/5] mxs-lradc: Split driver into MFD
@ 2016-11-20 10:57 Ksenija Stanojevic
2016-11-20 10:57 ` [PATCH v10 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD Ksenija Stanojevic
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Ksenija Stanojevic @ 2016-11-20 10:57 UTC (permalink / raw)
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A,
dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w,
linux-input-u79uwXL29TY76Z2rM5mHXA, jic23-DgEjT+Ai2ygdnm+yROfE0A,
knaack.h-Mmb7MZpHnFY, lars-Qo5EllUWu/uELgA04lAiVw,
pmeerw-jW+XmwGofnusTnJN9+BGXg, marex-ynQEQJNshbs,
linux-iio-u79uwXL29TY76Z2rM5mHXA, harald-95f8Dae0BrPYtjvyW6yDsg,
stefan.wahren-eS4NqCHxEME, fabio.estevam-KZfg59tc24xl57MIdRCFDg,
Ksenija Stanojevic
Split existing driver mxs-lradc into MFD with touchscreen and
IIO part.
Tested on I.MX28
Ksenija Stanojevic (5):
mfd: mxs-lradc: Add support for mxs-lradc MFD
iio: adc: mxs-lradc: Add support for adc driver
input: touchscreen: mxs-lradc: Add support for touchscreen
iio: adc: mxs-lradc: Remove driver
mfd: Move binding document
.../bindings/{iio/adc => mfd}/mxs-lradc.txt | 0
drivers/iio/adc/Kconfig | 27 +-
drivers/iio/adc/Makefile | 2 +-
drivers/iio/adc/mxs-lradc-adc.c | 845 ++++++++++
drivers/iio/adc/mxs-lradc.c | 1750 --------------------
drivers/input/touchscreen/Kconfig | 10 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/mxs-lradc-ts.c | 743 +++++++++
drivers/mfd/Kconfig | 17 +
drivers/mfd/Makefile | 1 +
drivers/mfd/mxs-lradc.c | 261 +++
include/linux/mfd/mxs-lradc.h | 203 +++
12 files changed, 2095 insertions(+), 1765 deletions(-)
rename Documentation/devicetree/bindings/{iio/adc => mfd}/mxs-lradc.txt (100%)
create mode 100644 drivers/iio/adc/mxs-lradc-adc.c
delete mode 100644 drivers/iio/adc/mxs-lradc.c
create mode 100644 drivers/input/touchscreen/mxs-lradc-ts.c
create mode 100644 drivers/mfd/mxs-lradc.c
create mode 100644 include/linux/mfd/mxs-lradc.h
--
1.9.1
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v10 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD 2016-11-20 10:57 [PATCH v10 0/5] mxs-lradc: Split driver into MFD Ksenija Stanojevic @ 2016-11-20 10:57 ` Ksenija Stanojevic 2016-11-21 10:49 ` Lee Jones 2016-11-20 10:57 ` [PATCH v10 4/5] iio: adc: mxs-lradc: Remove driver Ksenija Stanojevic [not found] ` <cover.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2 siblings, 1 reply; 8+ messages in thread From: Ksenija Stanojevic @ 2016-11-20 10:57 UTC (permalink / raw) To: linux-kernel Cc: lee.jones, dmitry.torokhov, linux-input, jic23, knaack.h, lars, pmeerw, marex, linux-iio, harald, stefan.wahren, fabio.estevam, Ksenija Stanojevic Add core files for low resolution analog-to-digital converter (mxs-lradc) MFD driver. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> --- Changes in v10: - fetch base address from DT - add a NULL check for of_match_device Changes in v9: - improve commit message. Changes in v8: - rebase onto 4.9-rc1 Changes in v7: - define macros ADC_CELL and TSC_CELL - remove one cell and dynamically set them in the switch() - fail in the touchscreen driver instead of mfd driver if hardware doesn't contain a touchscreen Changes in v6: - update copyright - add kernel-doc header for struct mxs-lradc - add error message - change EINVAL to ENODEV - use PLATFORM_DEVID_NONE instead -1 - cosmetic fixes Changes in v5: - use DEFINE_RES_MEM - don't pass ioreammaped adress to platform cells - move comment outside of struct mxs_lradc - change type of argument in mxs_lradc_reg_set, mxs_lradc_reg_clear, mxs_lradc_reg_wrt (struct mxs_lradc * -> void __iomem *) Changes in v4: - update copyright - use DEFINE_RES_IRQ_NAMED - remove mxs_lradc_add_device function - use struct mfd_cell in static form - improve spacing - remove unnecessary comment - remove platform_get_irq - remove touch_ret and use ret instead - rename use_touchscreen to touchscreen_wire - use goto statements - remove irq[13], irq_count and irq_name from struct mxs_lradc - remove all defines from inside the struct definition Changes in v3: - add note to commit message - move switch statement into if(touch_ret == 0) branch - add MODULE_AUTHOR Changes in v2: - do not change spacing in Kconfig - make struct mfd_cell part of struct mxs_lradc - use switch instead of if in mxs_lradc_irq_mask - use only necessary header files in mxs_lradc.h - use devm_mfd_add_device - use separate function to register mfd device - change licence to GPL - add copyright drivers/mfd/Kconfig | 17 +++ drivers/mfd/Makefile | 1 + drivers/mfd/mxs-lradc.c | 261 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/mxs-lradc.h | 203 ++++++++++++++++++++++++++++++++ 4 files changed, 482 insertions(+) create mode 100644 drivers/mfd/mxs-lradc.c create mode 100644 include/linux/mfd/mxs-lradc.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 819dc0a..e5c1289 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -343,6 +343,23 @@ config MFD_MC13XXX_I2C help Select this if your MC13xxx is connected via an I2C bus. +config MFD_MXS_LRADC + tristate "Freescale i.MX23/i.MX28 LRADC" + depends on ARCH_MXS || COMPILE_TEST + select MFD_CORE + select STMP_DEVICE + help + Say yes here to build support for the Low Resolution + Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28 + processors. This driver provides common support for accessing the + device, additional drivers must be enabled in order to use the + functionality of the device: + mxs-lradc-adc for ADC readings + mxs-lradc-ts for touchscreen support + + This driver can also be built as a module. If so, the module will be + called mxs-lradc. + config MFD_MX25_TSADC tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" select REGMAP_MMIO diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index db39377..90e9f36 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -212,3 +212,4 @@ obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o +obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o diff --git a/drivers/mfd/mxs-lradc.c b/drivers/mfd/mxs-lradc.c new file mode 100644 index 0000000..8f56cf9 --- /dev/null +++ b/drivers/mfd/mxs-lradc.c @@ -0,0 +1,261 @@ +/* + * Freescale MXS Low Resolution Analog-to-Digital Converter driver + * + * Copyright (c) 2012 DENX Software Engineering, GmbH. + * Copyright (c) 2016 Ksenija Stanojevic <ksenija.stanojevic@gmail.com> + * + * Authors: + * Marek Vasut <marex@denx.de> + * Ksenija Stanojevic <ksenija.stanojevic@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/mxs-lradc.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define ADC_CELL 0 +#define TSC_CELL 1 +#define RES_MEM 0 + +enum mx23_lradc_irqs { + MX23_LRADC_TS_IRQ = 0, + MX23_LRADC_CH0_IRQ, + MX23_LRADC_CH1_IRQ, + MX23_LRADC_CH2_IRQ, + MX23_LRADC_CH3_IRQ, + MX23_LRADC_CH4_IRQ, + MX23_LRADC_CH5_IRQ, + MX23_LRADC_CH6_IRQ, + MX23_LRADC_CH7_IRQ, +}; + +enum mx28_lradc_irqs { + MX28_LRADC_TS_IRQ = 0, + MX28_LRADC_TRESH0_IRQ, + MX28_LRADC_TRESH1_IRQ, + MX28_LRADC_CH0_IRQ, + MX28_LRADC_CH1_IRQ, + MX28_LRADC_CH2_IRQ, + MX28_LRADC_CH3_IRQ, + MX28_LRADC_CH4_IRQ, + MX28_LRADC_CH5_IRQ, + MX28_LRADC_CH6_IRQ, + MX28_LRADC_CH7_IRQ, + MX28_LRADC_BUTTON0_IRQ, + MX28_LRADC_BUTTON1_IRQ, +}; + +static struct resource mx23_adc_resources[] = { + DEFINE_RES_MEM(0x0, 0x0), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH0_IRQ, "mxs-lradc-channel0"), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH1_IRQ, "mxs-lradc-channel1"), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH2_IRQ, "mxs-lradc-channel2"), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH3_IRQ, "mxs-lradc-channel3"), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH4_IRQ, "mxs-lradc-channel4"), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH5_IRQ, "mxs-lradc-channel5"), +}; + +static struct resource mx23_touchscreen_resources[] = { + DEFINE_RES_MEM(0x0, 0x0), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_TS_IRQ, "mxs-lradc-touchscreen"), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH6_IRQ, "mxs-lradc-channel6"), + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH7_IRQ, "mxs-lradc-channel7"), +}; + +static struct resource mx28_adc_resources[] = { + DEFINE_RES_MEM(0x0, 0x0), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TRESH0_IRQ, "mxs-lradc-thresh0"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TRESH1_IRQ, "mxs-lradc-thresh1"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH0_IRQ, "mxs-lradc-channel0"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH1_IRQ, "mxs-lradc-channel1"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH2_IRQ, "mxs-lradc-channel2"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH3_IRQ, "mxs-lradc-channel3"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH4_IRQ, "mxs-lradc-channel4"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH5_IRQ, "mxs-lradc-channel5"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_BUTTON0_IRQ, "mxs-lradc-button0"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_BUTTON1_IRQ, "mxs-lradc-button1"), +}; + +static struct resource mx28_touchscreen_resources[] = { + DEFINE_RES_MEM(0x0, 0x0), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TS_IRQ, "mxs-lradc-touchscreen"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH6_IRQ, "mxs-lradc-channel6"), + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH7_IRQ, "mxs-lradc-channel7"), +}; + +static struct mfd_cell mxs_cells[] = { + { + .name = "mxs-lradc-adc", + }, + { + .name = "mxs-lradc-ts", + }, +}; + +static const struct of_device_id mxs_lradc_dt_ids[] = { + { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, }, + { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); + +static int mxs_lradc_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct mxs_lradc *lradc; + struct mfd_cell *cells = mxs_cells; + struct resource *res; + int ret = 0; + u32 ts_wires = 0; + + lradc = devm_kzalloc(&pdev->dev, sizeof(*lradc), GFP_KERNEL); + if (!lradc) + return -ENOMEM; + + of_id = of_match_device(mxs_lradc_dt_ids, &pdev->dev); + if (!of_id) + return -EINVAL; + + lradc->soc = (enum mxs_lradc_id)of_id->data; + + lradc->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(lradc->clk)) { + dev_err(dev, "Failed to get the delay unit clock\n"); + return PTR_ERR(lradc->clk); + } + + ret = clk_prepare_enable(lradc->clk); + if (ret) { + dev_err(dev, "Failed to enable the delay unit clock\n"); + return ret; + } + + ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires", + &ts_wires); + + if (!ret) { + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; + + switch (ts_wires) { + case 4: + lradc->touchscreen_wire = MXS_LRADC_TOUCHSCREEN_4WIRE; + break; + case 5: + if (lradc->soc == IMX28_LRADC) { + lradc->touchscreen_wire = + MXS_LRADC_TOUCHSCREEN_5WIRE; + break; + } + /* fall through to an error message for i.MX23 */ + default: + dev_err(&pdev->dev, + "Unsupported number of touchscreen wires (%d)\n" + , ts_wires); + ret = -EINVAL; + goto err_clk; + } + } else { + lradc->buffer_vchans = BUFFER_VCHANS_ALL; + } + + platform_set_drvdata(pdev, lradc); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOMEM; + + switch (lradc->soc) { + case IMX23_LRADC: + mx23_adc_resources[RES_MEM] = *res; + mx23_touchscreen_resources[RES_MEM] = *res; + cells[ADC_CELL].resources = mx23_adc_resources; + cells[ADC_CELL].num_resources = ARRAY_SIZE(mx23_adc_resources); + cells[TSC_CELL].resources = mx23_touchscreen_resources; + cells[TSC_CELL].num_resources = + ARRAY_SIZE(mx23_touchscreen_resources); + break; + case IMX28_LRADC: + mx28_adc_resources[0] = *res; + mx28_touchscreen_resources[0] = *res; + cells[ADC_CELL].resources = mx28_adc_resources; + cells[ADC_CELL].num_resources = ARRAY_SIZE(mx28_adc_resources); + cells[TSC_CELL].resources = mx28_touchscreen_resources; + cells[TSC_CELL].num_resources = + ARRAY_SIZE(mx28_touchscreen_resources); + break; + default: + dev_err(dev, "Unsupported SoC\n"); + ret = -ENODEV; + goto err_clk; + } + + cells[ADC_CELL].platform_data = lradc; + cells[ADC_CELL].pdata_size = sizeof(*lradc); + + ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, + &cells[ADC_CELL], 1, NULL, 0, NULL); + if (ret) { + dev_err(&pdev->dev, "Failed to add the ADC subdevice\n"); + goto err_clk; + } + + cells[TSC_CELL].platform_data = lradc; + cells[TSC_CELL].pdata_size = sizeof(*lradc); + + ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, + &cells[TSC_CELL], 1, NULL, 0, NULL); + if (ret) { + dev_err(&pdev->dev, + "Failed to add the touchscreen subdevice\n"); + goto err_clk; + } + + return 0; + +err_clk: + clk_disable_unprepare(lradc->clk); + + return ret; +} + +static int mxs_lradc_remove(struct platform_device *pdev) +{ + struct mxs_lradc *lradc = platform_get_drvdata(pdev); + + clk_disable_unprepare(lradc->clk); + + return 0; +} + +static struct platform_driver mxs_lradc_driver = { + .driver = { + .name = "mxs-lradc", + .of_match_table = mxs_lradc_dt_ids, + }, + .probe = mxs_lradc_probe, + .remove = mxs_lradc_remove, +}; +module_platform_driver(mxs_lradc_driver); + +MODULE_AUTHOR("Ksenija Stanojevic <ksenija.stanojevic@gmail.com>"); +MODULE_DESCRIPTION("Freescale i.MX23/i.MX28 LRADC driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-lradc"); diff --git a/include/linux/mfd/mxs-lradc.h b/include/linux/mfd/mxs-lradc.h new file mode 100644 index 0000000..64140681 --- /dev/null +++ b/include/linux/mfd/mxs-lradc.h @@ -0,0 +1,203 @@ +/* + * Freescale MXS Low Resolution Analog-to-Digital Converter driver + * + * Copyright (c) 2012 DENX Software Engineering, GmbH. + * Copyright (c) 2016 Ksenija Stanojevic <ksenija.stanojevic@gmail.com> + * + * Author: Marek Vasut <marex@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MFD_MXS_LRADC_H +#define __MFD_MXS_LRADC_H + +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/stmp_device.h> + +#define LRADC_MAX_DELAY_CHANS 4 +#define LRADC_MAX_MAPPED_CHANS 8 +#define LRADC_MAX_TOTAL_CHANS 16 + +#define LRADC_DELAY_TIMER_HZ 2000 + +#define LRADC_CTRL0 0x00 +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23) +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22) +# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21) +# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20) +# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19) +# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18) +# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17) +# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16) + +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20) +# define LRADC_CTRL0_MX23_YM BIT(19) +# define LRADC_CTRL0_MX23_XM BIT(18) +# define LRADC_CTRL0_MX23_YP BIT(17) +# define LRADC_CTRL0_MX23_XP BIT(16) + +# define LRADC_CTRL0_MX28_PLATE_MASK \ + (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \ + LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \ + LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \ + LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW) + +# define LRADC_CTRL0_MX23_PLATE_MASK \ + (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \ + LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \ + LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP) + +#define LRADC_CTRL1 0x10 +#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24) +#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) +#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) +#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16) +#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 +#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8) +#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) +#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff +#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff +#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0 + +#define LRADC_CTRL2 0x20 +#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24 +#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15) + +#define LRADC_STATUS 0x40 +#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0) + +#define LRADC_CH(n) (0x50 + (0x10 * (n))) +#define LRADC_CH_ACCUMULATE BIT(29) +#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) +#define LRADC_CH_NUM_SAMPLES_OFFSET 24 +#define LRADC_CH_NUM_SAMPLES(x) \ + ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) +#define LRADC_CH_VALUE_MASK 0x3ffff +#define LRADC_CH_VALUE_OFFSET 0 + +#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) +#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24) +#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 +#define LRADC_DELAY_TRIGGER(x) \ + (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ + LRADC_DELAY_TRIGGER_LRADCS_MASK) +#define LRADC_DELAY_KICK BIT(20) +#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) +#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 +#define LRADC_DELAY_TRIGGER_DELAYS(x) \ + (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ + LRADC_DELAY_TRIGGER_DELAYS_MASK) +#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) +#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 +#define LRADC_DELAY_LOOP(x) \ + (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ + LRADC_DELAY_LOOP_COUNT_MASK) +#define LRADC_DELAY_DELAY_MASK 0x7ff +#define LRADC_DELAY_DELAY_OFFSET 0 +#define LRADC_DELAY_DELAY(x) \ + (((x) << LRADC_DELAY_DELAY_OFFSET) & \ + LRADC_DELAY_DELAY_MASK) + +#define LRADC_CTRL4 0x140 +#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) +#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) +#define LRADC_CTRL4_LRADCSELECT(n, x) \ + (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ + LRADC_CTRL4_LRADCSELECT_MASK(n)) + +#define LRADC_RESOLUTION 12 +#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) + +#define BUFFER_VCHANS_LIMITED 0x3f +#define BUFFER_VCHANS_ALL 0xff + + /* + * Certain LRADC channels are shared between touchscreen + * and/or touch-buttons and generic LRADC block. Therefore when using + * either of these, these channels are not available for the regular + * sampling. The shared channels are as follows: + * + * CH0 -- Touch button #0 + * CH1 -- Touch button #1 + * CH2 -- Touch screen XPUL + * CH3 -- Touch screen YPLL + * CH4 -- Touch screen XNUL + * CH5 -- Touch screen YNLR + * CH6 -- Touch screen WIPER (5-wire only) + * + * The bit fields below represents which parts of the LRADC block are + * switched into special mode of operation. These channels can not + * be sampled as regular LRADC channels. The driver will refuse any + * attempt to sample these channels. + */ +#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0)) +#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) +#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) + +enum mxs_lradc_id { + IMX23_LRADC, + IMX28_LRADC, +}; + +enum mxs_lradc_ts_wires { + MXS_LRADC_TOUCHSCREEN_NONE = 0, + MXS_LRADC_TOUCHSCREEN_4WIRE, + MXS_LRADC_TOUCHSCREEN_5WIRE, +}; + +/** + * struct mxs_lradc + * @soc: soc type (IMX23 or IMX28) + * @clk: 2 kHz clock for delay units + * @buffer_vchans: channels that can be used during buffered capture + * @touchscreen_wire: touchscreen type (4-wire or 5-wire) + * @use_touchbutton: button state (on or off) + */ +struct mxs_lradc { + enum mxs_lradc_id soc; + struct clk *clk; + u8 buffer_vchans; + + enum mxs_lradc_ts_wires touchscreen_wire; + bool use_touchbutton; +}; + +static inline void mxs_lradc_reg_set(void __iomem *base, u32 val, u32 reg) +{ + writel(val, base + reg + STMP_OFFSET_REG_SET); +} + +static inline void mxs_lradc_reg_clear(void __iomem *base, u32 val, + u32 reg) +{ + writel(val, base + reg + STMP_OFFSET_REG_CLR); +} + +static inline void mxs_lradc_reg_wrt(void __iomem *base, u32 val, u32 reg) +{ + writel(val, base + reg); +} + +static inline u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) +{ + switch (lradc->soc) { + case IMX23_LRADC: + return LRADC_CTRL1_MX23_LRADC_IRQ_MASK; + case IMX28_LRADC: + return LRADC_CTRL1_MX28_LRADC_IRQ_MASK; + default: + return 0; + } +} + +#endif /* __MXS_LRADC_H */ -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v10 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD 2016-11-20 10:57 ` [PATCH v10 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD Ksenija Stanojevic @ 2016-11-21 10:49 ` Lee Jones 0 siblings, 0 replies; 8+ messages in thread From: Lee Jones @ 2016-11-21 10:49 UTC (permalink / raw) To: Ksenija Stanojevic Cc: linux-kernel, dmitry.torokhov, linux-input, jic23, knaack.h, lars, pmeerw, marex, linux-iio, harald, stefan.wahren, fabio.estevam On Sun, 20 Nov 2016, Ksenija Stanojevic wrote: > Add core files for low resolution analog-to-digital converter (mxs-lradc) > MFD driver. > > Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> > --- > Changes in v10: > - fetch base address from DT > - add a NULL check for of_match_device > > Changes in v9: > - improve commit message. > > Changes in v8: > - rebase onto 4.9-rc1 > > Changes in v7: > - define macros ADC_CELL and TSC_CELL > - remove one cell and dynamically set them in the switch() > - fail in the touchscreen driver instead of mfd driver if > hardware doesn't contain a touchscreen > > Changes in v6: > - update copyright > - add kernel-doc header for struct mxs-lradc > - add error message > - change EINVAL to ENODEV > - use PLATFORM_DEVID_NONE instead -1 > - cosmetic fixes > > Changes in v5: > - use DEFINE_RES_MEM > - don't pass ioreammaped adress to platform cells > - move comment outside of struct mxs_lradc > - change type of argument in mxs_lradc_reg_set, mxs_lradc_reg_clear, > mxs_lradc_reg_wrt (struct mxs_lradc * -> void __iomem *) > > Changes in v4: > - update copyright > - use DEFINE_RES_IRQ_NAMED > - remove mxs_lradc_add_device function > - use struct mfd_cell in static form > - improve spacing > - remove unnecessary comment > - remove platform_get_irq > - remove touch_ret and use ret instead > - rename use_touchscreen to touchscreen_wire > - use goto statements > - remove irq[13], irq_count and irq_name from struct mxs_lradc > - remove all defines from inside the struct definition > > Changes in v3: > - add note to commit message > - move switch statement into if(touch_ret == 0) branch > - add MODULE_AUTHOR > > Changes in v2: > - do not change spacing in Kconfig > - make struct mfd_cell part of struct mxs_lradc > - use switch instead of if in mxs_lradc_irq_mask > - use only necessary header files in mxs_lradc.h > - use devm_mfd_add_device > - use separate function to register mfd device > - change licence to GPL > - add copyright > > drivers/mfd/Kconfig | 17 +++ > drivers/mfd/Makefile | 1 + > drivers/mfd/mxs-lradc.c | 261 ++++++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/mxs-lradc.h | 203 ++++++++++++++++++++++++++++++++ > 4 files changed, 482 insertions(+) > create mode 100644 drivers/mfd/mxs-lradc.c > create mode 100644 include/linux/mfd/mxs-lradc.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 819dc0a..e5c1289 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -343,6 +343,23 @@ config MFD_MC13XXX_I2C > help > Select this if your MC13xxx is connected via an I2C bus. > > +config MFD_MXS_LRADC > + tristate "Freescale i.MX23/i.MX28 LRADC" > + depends on ARCH_MXS || COMPILE_TEST > + select MFD_CORE > + select STMP_DEVICE > + help > + Say yes here to build support for the Low Resolution > + Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28 > + processors. This driver provides common support for accessing the > + device, additional drivers must be enabled in order to use the > + functionality of the device: > + mxs-lradc-adc for ADC readings > + mxs-lradc-ts for touchscreen support > + > + This driver can also be built as a module. If so, the module will be > + called mxs-lradc. > + > config MFD_MX25_TSADC > tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" > select REGMAP_MMIO > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index db39377..90e9f36 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -212,3 +212,4 @@ obj-$(CONFIG_MFD_MT6397) += mt6397-core.o > > obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o > obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o > +obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o > diff --git a/drivers/mfd/mxs-lradc.c b/drivers/mfd/mxs-lradc.c > new file mode 100644 > index 0000000..8f56cf9 > --- /dev/null > +++ b/drivers/mfd/mxs-lradc.c > @@ -0,0 +1,261 @@ > +/* > + * Freescale MXS Low Resolution Analog-to-Digital Converter driver > + * > + * Copyright (c) 2012 DENX Software Engineering, GmbH. > + * Copyright (c) 2016 Ksenija Stanojevic <ksenija.stanojevic@gmail.com> > + * > + * Authors: > + * Marek Vasut <marex@denx.de> > + * Ksenija Stanojevic <ksenija.stanojevic@gmail.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/mfd/core.h> > +#include <linux/mfd/mxs-lradc.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +#define ADC_CELL 0 > +#define TSC_CELL 1 > +#define RES_MEM 0 > + > +enum mx23_lradc_irqs { > + MX23_LRADC_TS_IRQ = 0, > + MX23_LRADC_CH0_IRQ, > + MX23_LRADC_CH1_IRQ, > + MX23_LRADC_CH2_IRQ, > + MX23_LRADC_CH3_IRQ, > + MX23_LRADC_CH4_IRQ, > + MX23_LRADC_CH5_IRQ, > + MX23_LRADC_CH6_IRQ, > + MX23_LRADC_CH7_IRQ, > +}; > + > +enum mx28_lradc_irqs { > + MX28_LRADC_TS_IRQ = 0, > + MX28_LRADC_TRESH0_IRQ, > + MX28_LRADC_TRESH1_IRQ, > + MX28_LRADC_CH0_IRQ, > + MX28_LRADC_CH1_IRQ, > + MX28_LRADC_CH2_IRQ, > + MX28_LRADC_CH3_IRQ, > + MX28_LRADC_CH4_IRQ, > + MX28_LRADC_CH5_IRQ, > + MX28_LRADC_CH6_IRQ, > + MX28_LRADC_CH7_IRQ, > + MX28_LRADC_BUTTON0_IRQ, > + MX28_LRADC_BUTTON1_IRQ, > +}; > + > +static struct resource mx23_adc_resources[] = { > + DEFINE_RES_MEM(0x0, 0x0), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH0_IRQ, "mxs-lradc-channel0"), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH1_IRQ, "mxs-lradc-channel1"), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH2_IRQ, "mxs-lradc-channel2"), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH3_IRQ, "mxs-lradc-channel3"), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH4_IRQ, "mxs-lradc-channel4"), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH5_IRQ, "mxs-lradc-channel5"), > +}; > + > +static struct resource mx23_touchscreen_resources[] = { > + DEFINE_RES_MEM(0x0, 0x0), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_TS_IRQ, "mxs-lradc-touchscreen"), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH6_IRQ, "mxs-lradc-channel6"), > + DEFINE_RES_IRQ_NAMED(MX23_LRADC_CH7_IRQ, "mxs-lradc-channel7"), > +}; > + > +static struct resource mx28_adc_resources[] = { > + DEFINE_RES_MEM(0x0, 0x0), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TRESH0_IRQ, "mxs-lradc-thresh0"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TRESH1_IRQ, "mxs-lradc-thresh1"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH0_IRQ, "mxs-lradc-channel0"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH1_IRQ, "mxs-lradc-channel1"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH2_IRQ, "mxs-lradc-channel2"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH3_IRQ, "mxs-lradc-channel3"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH4_IRQ, "mxs-lradc-channel4"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH5_IRQ, "mxs-lradc-channel5"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_BUTTON0_IRQ, "mxs-lradc-button0"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_BUTTON1_IRQ, "mxs-lradc-button1"), > +}; > + > +static struct resource mx28_touchscreen_resources[] = { > + DEFINE_RES_MEM(0x0, 0x0), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_TS_IRQ, "mxs-lradc-touchscreen"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH6_IRQ, "mxs-lradc-channel6"), > + DEFINE_RES_IRQ_NAMED(MX28_LRADC_CH7_IRQ, "mxs-lradc-channel7"), > +}; > + > +static struct mfd_cell mxs_cells[] = { > + { > + .name = "mxs-lradc-adc", > + }, > + { > + .name = "mxs-lradc-ts", > + }, > +}; > + > +static const struct of_device_id mxs_lradc_dt_ids[] = { > + { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, }, > + { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); > + > +static int mxs_lradc_probe(struct platform_device *pdev) > +{ > + const struct of_device_id *of_id; > + struct device *dev = &pdev->dev; > + struct device_node *node = dev->of_node; > + struct mxs_lradc *lradc; > + struct mfd_cell *cells = mxs_cells; > + struct resource *res; > + int ret = 0; > + u32 ts_wires = 0; > + > + lradc = devm_kzalloc(&pdev->dev, sizeof(*lradc), GFP_KERNEL); > + if (!lradc) > + return -ENOMEM; > + > + of_id = of_match_device(mxs_lradc_dt_ids, &pdev->dev); > + if (!of_id) > + return -EINVAL; > + > + lradc->soc = (enum mxs_lradc_id)of_id->data; > + > + lradc->clk = devm_clk_get(&pdev->dev, NULL); > + if (IS_ERR(lradc->clk)) { > + dev_err(dev, "Failed to get the delay unit clock\n"); > + return PTR_ERR(lradc->clk); > + } > + > + ret = clk_prepare_enable(lradc->clk); > + if (ret) { > + dev_err(dev, "Failed to enable the delay unit clock\n"); > + return ret; > + } > + > + ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires", > + &ts_wires); > + > + if (!ret) { > + lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; > + > + switch (ts_wires) { > + case 4: > + lradc->touchscreen_wire = MXS_LRADC_TOUCHSCREEN_4WIRE; > + break; > + case 5: > + if (lradc->soc == IMX28_LRADC) { > + lradc->touchscreen_wire = > + MXS_LRADC_TOUCHSCREEN_5WIRE; > + break; > + } > + /* fall through to an error message for i.MX23 */ > + default: > + dev_err(&pdev->dev, > + "Unsupported number of touchscreen wires (%d)\n" > + , ts_wires); > + ret = -EINVAL; > + goto err_clk; > + } > + } else { > + lradc->buffer_vchans = BUFFER_VCHANS_ALL; > + } > + > + platform_set_drvdata(pdev, lradc); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) > + return -ENOMEM; > + > + switch (lradc->soc) { > + case IMX23_LRADC: > + mx23_adc_resources[RES_MEM] = *res; > + mx23_touchscreen_resources[RES_MEM] = *res; > + cells[ADC_CELL].resources = mx23_adc_resources; > + cells[ADC_CELL].num_resources = ARRAY_SIZE(mx23_adc_resources); > + cells[TSC_CELL].resources = mx23_touchscreen_resources; > + cells[TSC_CELL].num_resources = > + ARRAY_SIZE(mx23_touchscreen_resources); > + break; > + case IMX28_LRADC: > + mx28_adc_resources[0] = *res; > + mx28_touchscreen_resources[0] = *res; > + cells[ADC_CELL].resources = mx28_adc_resources; > + cells[ADC_CELL].num_resources = ARRAY_SIZE(mx28_adc_resources); > + cells[TSC_CELL].resources = mx28_touchscreen_resources; > + cells[TSC_CELL].num_resources = > + ARRAY_SIZE(mx28_touchscreen_resources); > + break; You only need to do this if some parts of the cells are dynamically obtained. All of these resources are static, so just create static 'struct mfd_cell's like most other drivers do. > + default: > + dev_err(dev, "Unsupported SoC\n"); > + ret = -ENODEV; > + goto err_clk; > + } > + > + cells[ADC_CELL].platform_data = lradc; > + cells[ADC_CELL].pdata_size = sizeof(*lradc); This isn't platform data either, it's driver data. Use the platform_set_drvdata() API for this. > + ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, > + &cells[ADC_CELL], 1, NULL, 0, NULL); > + if (ret) { > + dev_err(&pdev->dev, "Failed to add the ADC subdevice\n"); > + goto err_clk; > + } > + > + cells[TSC_CELL].platform_data = lradc; > + cells[TSC_CELL].pdata_size = sizeof(*lradc); Same here. > + ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, > + &cells[TSC_CELL], 1, NULL, 0, NULL); > + if (ret) { > + dev_err(&pdev->dev, > + "Failed to add the touchscreen subdevice\n"); > + goto err_clk; > + } > + > + return 0; > + > +err_clk: > + clk_disable_unprepare(lradc->clk); > + > + return ret; > +} > + > +static int mxs_lradc_remove(struct platform_device *pdev) > +{ > + struct mxs_lradc *lradc = platform_get_drvdata(pdev); > + > + clk_disable_unprepare(lradc->clk); > + > + return 0; > +} > + > +static struct platform_driver mxs_lradc_driver = { > + .driver = { > + .name = "mxs-lradc", > + .of_match_table = mxs_lradc_dt_ids, > + }, > + .probe = mxs_lradc_probe, > + .remove = mxs_lradc_remove, > +}; > +module_platform_driver(mxs_lradc_driver); > + > +MODULE_AUTHOR("Ksenija Stanojevic <ksenija.stanojevic@gmail.com>"); > +MODULE_DESCRIPTION("Freescale i.MX23/i.MX28 LRADC driver"); > +MODULE_LICENSE("GPL"); > +MODULE_ALIAS("platform:mxs-lradc"); > diff --git a/include/linux/mfd/mxs-lradc.h b/include/linux/mfd/mxs-lradc.h > new file mode 100644 > index 0000000..64140681 > --- /dev/null > +++ b/include/linux/mfd/mxs-lradc.h > @@ -0,0 +1,203 @@ > +/* > + * Freescale MXS Low Resolution Analog-to-Digital Converter driver > + * > + * Copyright (c) 2012 DENX Software Engineering, GmbH. > + * Copyright (c) 2016 Ksenija Stanojevic <ksenija.stanojevic@gmail.com> > + * > + * Author: Marek Vasut <marex@denx.de> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#ifndef __MFD_MXS_LRADC_H > +#define __MFD_MXS_LRADC_H > + > +#include <linux/bitops.h> > +#include <linux/io.h> > +#include <linux/stmp_device.h> > + > +#define LRADC_MAX_DELAY_CHANS 4 > +#define LRADC_MAX_MAPPED_CHANS 8 > +#define LRADC_MAX_TOTAL_CHANS 16 > + > +#define LRADC_DELAY_TIMER_HZ 2000 > + > +#define LRADC_CTRL0 0x00 > +# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23) > +# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22) > +# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21) > +# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20) > +# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19) > +# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18) > +# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17) > +# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16) > + > +# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20) > +# define LRADC_CTRL0_MX23_YM BIT(19) > +# define LRADC_CTRL0_MX23_XM BIT(18) > +# define LRADC_CTRL0_MX23_YP BIT(17) > +# define LRADC_CTRL0_MX23_XP BIT(16) > + > +# define LRADC_CTRL0_MX28_PLATE_MASK \ > + (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \ > + LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \ > + LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \ > + LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW) > + > +# define LRADC_CTRL0_MX23_PLATE_MASK \ > + (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \ > + LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \ > + LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP) > + > +#define LRADC_CTRL1 0x10 > +#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24) > +#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) > +#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) > +#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16) > +#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 > +#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8) > +#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) > +#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff > +#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff > +#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0 > + > +#define LRADC_CTRL2 0x20 > +#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24 > +#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15) > + > +#define LRADC_STATUS 0x40 > +#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0) > + > +#define LRADC_CH(n) (0x50 + (0x10 * (n))) > +#define LRADC_CH_ACCUMULATE BIT(29) > +#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) > +#define LRADC_CH_NUM_SAMPLES_OFFSET 24 > +#define LRADC_CH_NUM_SAMPLES(x) \ > + ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) > +#define LRADC_CH_VALUE_MASK 0x3ffff > +#define LRADC_CH_VALUE_OFFSET 0 > + > +#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) > +#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24) > +#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 > +#define LRADC_DELAY_TRIGGER(x) \ > + (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ > + LRADC_DELAY_TRIGGER_LRADCS_MASK) > +#define LRADC_DELAY_KICK BIT(20) > +#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) > +#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 > +#define LRADC_DELAY_TRIGGER_DELAYS(x) \ > + (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ > + LRADC_DELAY_TRIGGER_DELAYS_MASK) > +#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) > +#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 > +#define LRADC_DELAY_LOOP(x) \ > + (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ > + LRADC_DELAY_LOOP_COUNT_MASK) > +#define LRADC_DELAY_DELAY_MASK 0x7ff > +#define LRADC_DELAY_DELAY_OFFSET 0 > +#define LRADC_DELAY_DELAY(x) \ > + (((x) << LRADC_DELAY_DELAY_OFFSET) & \ > + LRADC_DELAY_DELAY_MASK) > + > +#define LRADC_CTRL4 0x140 > +#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) > +#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) > +#define LRADC_CTRL4_LRADCSELECT(n, x) \ > + (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ > + LRADC_CTRL4_LRADCSELECT_MASK(n)) > + > +#define LRADC_RESOLUTION 12 > +#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) > + > +#define BUFFER_VCHANS_LIMITED 0x3f > +#define BUFFER_VCHANS_ALL 0xff > + > + /* > + * Certain LRADC channels are shared between touchscreen > + * and/or touch-buttons and generic LRADC block. Therefore when using > + * either of these, these channels are not available for the regular > + * sampling. The shared channels are as follows: > + * > + * CH0 -- Touch button #0 > + * CH1 -- Touch button #1 > + * CH2 -- Touch screen XPUL > + * CH3 -- Touch screen YPLL > + * CH4 -- Touch screen XNUL > + * CH5 -- Touch screen YNLR > + * CH6 -- Touch screen WIPER (5-wire only) > + * > + * The bit fields below represents which parts of the LRADC block are > + * switched into special mode of operation. These channels can not > + * be sampled as regular LRADC channels. The driver will refuse any > + * attempt to sample these channels. > + */ > +#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0)) > +#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) > +#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) > + > +enum mxs_lradc_id { > + IMX23_LRADC, > + IMX28_LRADC, > +}; > + > +enum mxs_lradc_ts_wires { > + MXS_LRADC_TOUCHSCREEN_NONE = 0, > + MXS_LRADC_TOUCHSCREEN_4WIRE, > + MXS_LRADC_TOUCHSCREEN_5WIRE, > +}; > + > +/** > + * struct mxs_lradc > + * @soc: soc type (IMX23 or IMX28) > + * @clk: 2 kHz clock for delay units > + * @buffer_vchans: channels that can be used during buffered capture > + * @touchscreen_wire: touchscreen type (4-wire or 5-wire) > + * @use_touchbutton: button state (on or off) > + */ > +struct mxs_lradc { > + enum mxs_lradc_id soc; > + struct clk *clk; > + u8 buffer_vchans; > + > + enum mxs_lradc_ts_wires touchscreen_wire; > + bool use_touchbutton; > +}; > + > +static inline void mxs_lradc_reg_set(void __iomem *base, u32 val, u32 reg) > +{ > + writel(val, base + reg + STMP_OFFSET_REG_SET); > +} > + > +static inline void mxs_lradc_reg_clear(void __iomem *base, u32 val, > + u32 reg) > +{ > + writel(val, base + reg + STMP_OFFSET_REG_CLR); > +} > + > +static inline void mxs_lradc_reg_wrt(void __iomem *base, u32 val, u32 reg) > +{ > + writel(val, base + reg); > +} This type of API is pointless. Just use the writel() functions directly. > +static inline u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) > +{ > + switch (lradc->soc) { > + case IMX23_LRADC: > + return LRADC_CTRL1_MX23_LRADC_IRQ_MASK; > + case IMX28_LRADC: > + return LRADC_CTRL1_MX28_LRADC_IRQ_MASK; > + default: > + return 0; > + } > +} Use these directly too. > +#endif /* __MXS_LRADC_H */ -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v10 4/5] iio: adc: mxs-lradc: Remove driver 2016-11-20 10:57 [PATCH v10 0/5] mxs-lradc: Split driver into MFD Ksenija Stanojevic 2016-11-20 10:57 ` [PATCH v10 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD Ksenija Stanojevic @ 2016-11-20 10:57 ` Ksenija Stanojevic [not found] ` <cover.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2 siblings, 0 replies; 8+ messages in thread From: Ksenija Stanojevic @ 2016-11-20 10:57 UTC (permalink / raw) To: linux-kernel Cc: lee.jones, dmitry.torokhov, linux-input, jic23, knaack.h, lars, pmeerw, marex, linux-iio, harald, stefan.wahren, fabio.estevam, Ksenija Stanojevic Since the driver has been split into mfd there is no reason for it to stay, so remove it. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> Acked-by: Jonathan Cameron <jic23@kernel.org> --- Changes in v10: - none Changes in v9: - none Changes in v8: - rebase onto 4.9-rc1 Changes in v7: - none Changes in v6: - none Changes in v5: - none Changes in v4: - none Changes in v3: - none Changes in v2: - add to the patchset drivers/iio/adc/Kconfig | 14 - drivers/iio/adc/Makefile | 1 - drivers/iio/adc/mxs-lradc.c | 1750 ------------------------------------------- 3 files changed, 1765 deletions(-) delete mode 100644 drivers/iio/adc/mxs-lradc.c diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index ad6046a..30cdacf 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -374,20 +374,6 @@ config MEN_Z188_ADC This driver can also be built as a module. If so, the module will be called men_z188_adc. -config MXS_LRADC - tristate "Freescale i.MX23/i.MX28 LRADC" - depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM - depends on INPUT - select STMP_DEVICE - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - help - Say yes here to build support for i.MX23/i.MX28 LRADC convertor - built into these chips. - - To compile this driver as a module, choose M here: the - module will be called mxs-lradc. - config NAU7802 tristate "Nuvoton NAU7802 ADC driver" depends on I2C diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 4b2cf9b..b691f8a 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -36,7 +36,6 @@ obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o -obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c deleted file mode 100644 index b84d37c..0000000 --- a/drivers/iio/adc/mxs-lradc.c +++ /dev/null @@ -1,1750 +0,0 @@ -/* - * Freescale MXS LRADC driver - * - * Copyright (c) 2012 DENX Software Engineering, GmbH. - * Marek Vasut <marex@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/bitops.h> -#include <linux/clk.h> -#include <linux/completion.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/input.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/stmp_device.h> -#include <linux/sysfs.h> - -#include <linux/iio/buffer.h> -#include <linux/iio/iio.h> -#include <linux/iio/trigger.h> -#include <linux/iio/trigger_consumer.h> -#include <linux/iio/triggered_buffer.h> -#include <linux/iio/sysfs.h> - -#define DRIVER_NAME "mxs-lradc" - -#define LRADC_MAX_DELAY_CHANS 4 -#define LRADC_MAX_MAPPED_CHANS 8 -#define LRADC_MAX_TOTAL_CHANS 16 - -#define LRADC_DELAY_TIMER_HZ 2000 - -/* - * Make this runtime configurable if necessary. Currently, if the buffered mode - * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before - * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) - * seconds. The result is that the samples arrive every 500mS. - */ -#define LRADC_DELAY_TIMER_PER 200 -#define LRADC_DELAY_TIMER_LOOP 5 - -/* - * Once the pen touches the touchscreen, the touchscreen switches from - * IRQ-driven mode to polling mode to prevent interrupt storm. The polling - * is realized by worker thread, which is called every 20 or so milliseconds. - * This gives the touchscreen enough fluency and does not strain the system - * too much. - */ -#define LRADC_TS_SAMPLE_DELAY_MS 5 - -/* - * The LRADC reads the following amount of samples from each touchscreen - * channel and the driver then computes average of these. - */ -#define LRADC_TS_SAMPLE_AMOUNT 4 - -enum mxs_lradc_id { - IMX23_LRADC, - IMX28_LRADC, -}; - -static const char * const mx23_lradc_irq_names[] = { - "mxs-lradc-touchscreen", - "mxs-lradc-channel0", - "mxs-lradc-channel1", - "mxs-lradc-channel2", - "mxs-lradc-channel3", - "mxs-lradc-channel4", - "mxs-lradc-channel5", - "mxs-lradc-channel6", - "mxs-lradc-channel7", -}; - -static const char * const mx28_lradc_irq_names[] = { - "mxs-lradc-touchscreen", - "mxs-lradc-thresh0", - "mxs-lradc-thresh1", - "mxs-lradc-channel0", - "mxs-lradc-channel1", - "mxs-lradc-channel2", - "mxs-lradc-channel3", - "mxs-lradc-channel4", - "mxs-lradc-channel5", - "mxs-lradc-channel6", - "mxs-lradc-channel7", - "mxs-lradc-button0", - "mxs-lradc-button1", -}; - -struct mxs_lradc_of_config { - const int irq_count; - const char * const *irq_name; - const u32 *vref_mv; -}; - -#define VREF_MV_BASE 1850 - -static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = { - VREF_MV_BASE, /* CH0 */ - VREF_MV_BASE, /* CH1 */ - VREF_MV_BASE, /* CH2 */ - VREF_MV_BASE, /* CH3 */ - VREF_MV_BASE, /* CH4 */ - VREF_MV_BASE, /* CH5 */ - VREF_MV_BASE * 2, /* CH6 VDDIO */ - VREF_MV_BASE * 4, /* CH7 VBATT */ - VREF_MV_BASE, /* CH8 Temp sense 0 */ - VREF_MV_BASE, /* CH9 Temp sense 1 */ - VREF_MV_BASE, /* CH10 */ - VREF_MV_BASE, /* CH11 */ - VREF_MV_BASE, /* CH12 USB_DP */ - VREF_MV_BASE, /* CH13 USB_DN */ - VREF_MV_BASE, /* CH14 VBG */ - VREF_MV_BASE * 4, /* CH15 VDD5V */ -}; - -static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = { - VREF_MV_BASE, /* CH0 */ - VREF_MV_BASE, /* CH1 */ - VREF_MV_BASE, /* CH2 */ - VREF_MV_BASE, /* CH3 */ - VREF_MV_BASE, /* CH4 */ - VREF_MV_BASE, /* CH5 */ - VREF_MV_BASE, /* CH6 */ - VREF_MV_BASE * 4, /* CH7 VBATT */ - VREF_MV_BASE, /* CH8 Temp sense 0 */ - VREF_MV_BASE, /* CH9 Temp sense 1 */ - VREF_MV_BASE * 2, /* CH10 VDDIO */ - VREF_MV_BASE, /* CH11 VTH */ - VREF_MV_BASE * 2, /* CH12 VDDA */ - VREF_MV_BASE, /* CH13 VDDD */ - VREF_MV_BASE, /* CH14 VBG */ - VREF_MV_BASE * 4, /* CH15 VDD5V */ -}; - -static const struct mxs_lradc_of_config mxs_lradc_of_config[] = { - [IMX23_LRADC] = { - .irq_count = ARRAY_SIZE(mx23_lradc_irq_names), - .irq_name = mx23_lradc_irq_names, - .vref_mv = mx23_vref_mv, - }, - [IMX28_LRADC] = { - .irq_count = ARRAY_SIZE(mx28_lradc_irq_names), - .irq_name = mx28_lradc_irq_names, - .vref_mv = mx28_vref_mv, - }, -}; - -enum mxs_lradc_ts { - MXS_LRADC_TOUCHSCREEN_NONE = 0, - MXS_LRADC_TOUCHSCREEN_4WIRE, - MXS_LRADC_TOUCHSCREEN_5WIRE, -}; - -/* - * Touchscreen handling - */ -enum lradc_ts_plate { - LRADC_TOUCH = 0, - LRADC_SAMPLE_X, - LRADC_SAMPLE_Y, - LRADC_SAMPLE_PRESSURE, - LRADC_SAMPLE_VALID, -}; - -enum mxs_lradc_divbytwo { - MXS_LRADC_DIV_DISABLED = 0, - MXS_LRADC_DIV_ENABLED, -}; - -struct mxs_lradc_scale { - unsigned int integer; - unsigned int nano; -}; - -struct mxs_lradc { - struct device *dev; - void __iomem *base; - int irq[13]; - - struct clk *clk; - - u32 *buffer; - struct iio_trigger *trig; - - struct mutex lock; - - struct completion completion; - - const u32 *vref_mv; - struct mxs_lradc_scale scale_avail[LRADC_MAX_TOTAL_CHANS][2]; - unsigned long is_divided; - - /* - * When the touchscreen is enabled, we give it two private virtual - * channels: #6 and #7. This means that only 6 virtual channels (instead - * of 8) will be available for buffered capture. - */ -#define TOUCHSCREEN_VCHANNEL1 7 -#define TOUCHSCREEN_VCHANNEL2 6 -#define BUFFER_VCHANS_LIMITED 0x3f -#define BUFFER_VCHANS_ALL 0xff - u8 buffer_vchans; - - /* - * Furthermore, certain LRADC channels are shared between touchscreen - * and/or touch-buttons and generic LRADC block. Therefore when using - * either of these, these channels are not available for the regular - * sampling. The shared channels are as follows: - * - * CH0 -- Touch button #0 - * CH1 -- Touch button #1 - * CH2 -- Touch screen XPUL - * CH3 -- Touch screen YPLL - * CH4 -- Touch screen XNUL - * CH5 -- Touch screen YNLR - * CH6 -- Touch screen WIPER (5-wire only) - * - * The bit fields below represents which parts of the LRADC block are - * switched into special mode of operation. These channels can not - * be sampled as regular LRADC channels. The driver will refuse any - * attempt to sample these channels. - */ -#define CHAN_MASK_TOUCHBUTTON (BIT(1) | BIT(0)) -#define CHAN_MASK_TOUCHSCREEN_4WIRE (0xf << 2) -#define CHAN_MASK_TOUCHSCREEN_5WIRE (0x1f << 2) - enum mxs_lradc_ts use_touchscreen; - bool use_touchbutton; - - struct input_dev *ts_input; - - enum mxs_lradc_id soc; - enum lradc_ts_plate cur_plate; /* state machine */ - bool ts_valid; - unsigned ts_x_pos; - unsigned ts_y_pos; - unsigned ts_pressure; - - /* handle touchscreen's physical behaviour */ - /* samples per coordinate */ - unsigned over_sample_cnt; - /* time clocks between samples */ - unsigned over_sample_delay; - /* time in clocks to wait after the plates where switched */ - unsigned settling_delay; -}; - -#define LRADC_CTRL0 0x00 -# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE BIT(23) -# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE BIT(22) -# define LRADC_CTRL0_MX28_YNNSW /* YM */ BIT(21) -# define LRADC_CTRL0_MX28_YPNSW /* YP */ BIT(20) -# define LRADC_CTRL0_MX28_YPPSW /* YP */ BIT(19) -# define LRADC_CTRL0_MX28_XNNSW /* XM */ BIT(18) -# define LRADC_CTRL0_MX28_XNPSW /* XM */ BIT(17) -# define LRADC_CTRL0_MX28_XPPSW /* XP */ BIT(16) - -# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE BIT(20) -# define LRADC_CTRL0_MX23_YM BIT(19) -# define LRADC_CTRL0_MX23_XM BIT(18) -# define LRADC_CTRL0_MX23_YP BIT(17) -# define LRADC_CTRL0_MX23_XP BIT(16) - -# define LRADC_CTRL0_MX28_PLATE_MASK \ - (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \ - LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \ - LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \ - LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW) - -# define LRADC_CTRL0_MX23_PLATE_MASK \ - (LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \ - LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \ - LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP) - -#define LRADC_CTRL1 0x10 -#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN BIT(24) -#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16)) -#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16) -#define LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK (0x01ff << 16) -#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16 -#define LRADC_CTRL1_TOUCH_DETECT_IRQ BIT(8) -#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n)) -#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff -#define LRADC_CTRL1_MX23_LRADC_IRQ_MASK 0x01ff -#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0 - -#define LRADC_CTRL2 0x20 -#define LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET 24 -#define LRADC_CTRL2_TEMPSENSE_PWD BIT(15) - -#define LRADC_STATUS 0x40 -#define LRADC_STATUS_TOUCH_DETECT_RAW BIT(0) - -#define LRADC_CH(n) (0x50 + (0x10 * (n))) -#define LRADC_CH_ACCUMULATE BIT(29) -#define LRADC_CH_NUM_SAMPLES_MASK (0x1f << 24) -#define LRADC_CH_NUM_SAMPLES_OFFSET 24 -#define LRADC_CH_NUM_SAMPLES(x) \ - ((x) << LRADC_CH_NUM_SAMPLES_OFFSET) -#define LRADC_CH_VALUE_MASK 0x3ffff -#define LRADC_CH_VALUE_OFFSET 0 - -#define LRADC_DELAY(n) (0xd0 + (0x10 * (n))) -#define LRADC_DELAY_TRIGGER_LRADCS_MASK (0xffUL << 24) -#define LRADC_DELAY_TRIGGER_LRADCS_OFFSET 24 -#define LRADC_DELAY_TRIGGER(x) \ - (((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \ - LRADC_DELAY_TRIGGER_LRADCS_MASK) -#define LRADC_DELAY_KICK BIT(20) -#define LRADC_DELAY_TRIGGER_DELAYS_MASK (0xf << 16) -#define LRADC_DELAY_TRIGGER_DELAYS_OFFSET 16 -#define LRADC_DELAY_TRIGGER_DELAYS(x) \ - (((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \ - LRADC_DELAY_TRIGGER_DELAYS_MASK) -#define LRADC_DELAY_LOOP_COUNT_MASK (0x1f << 11) -#define LRADC_DELAY_LOOP_COUNT_OFFSET 11 -#define LRADC_DELAY_LOOP(x) \ - (((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \ - LRADC_DELAY_LOOP_COUNT_MASK) -#define LRADC_DELAY_DELAY_MASK 0x7ff -#define LRADC_DELAY_DELAY_OFFSET 0 -#define LRADC_DELAY_DELAY(x) \ - (((x) << LRADC_DELAY_DELAY_OFFSET) & \ - LRADC_DELAY_DELAY_MASK) - -#define LRADC_CTRL4 0x140 -#define LRADC_CTRL4_LRADCSELECT_MASK(n) (0xf << ((n) * 4)) -#define LRADC_CTRL4_LRADCSELECT_OFFSET(n) ((n) * 4) -#define LRADC_CTRL4_LRADCSELECT(n, x) \ - (((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \ - LRADC_CTRL4_LRADCSELECT_MASK(n)) - -#define LRADC_RESOLUTION 12 -#define LRADC_SINGLE_SAMPLE_MASK ((1 << LRADC_RESOLUTION) - 1) - -static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg + STMP_OFFSET_REG_SET); -} - -static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR); -} - -static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg) -{ - writel(val, lradc->base + reg); -} - -static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_PLATE_MASK; - return LRADC_CTRL0_MX28_PLATE_MASK; -} - -static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL1_MX23_LRADC_IRQ_MASK; - return LRADC_CTRL1_MX28_LRADC_IRQ_MASK; -} - -static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE; - return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE; -} - -static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM; - return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW; -} - -static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM; - return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW; -} - -static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM; - return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW; -} - -static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc) -{ - return !!(readl(lradc->base + LRADC_STATUS) & - LRADC_STATUS_TOUCH_DETECT_RAW); -} - -static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch, - unsigned ch) -{ - mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch), - LRADC_CTRL4); - mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4); -} - -static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch) -{ - /* - * prepare for oversampling conversion - * - * from the datasheet: - * "The ACCUMULATE bit in the appropriate channel register - * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; - * otherwise, the IRQs will not fire." - */ - mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE | - LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1), - LRADC_CH(ch)); - - /* - * from the datasheet: - * "Software must clear this register in preparation for a - * multi-cycle accumulation. - */ - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch)); - - /* - * prepare the delay/loop unit according to the oversampling count - * - * from the datasheet: - * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1, - * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise, - * the LRADC will not trigger the delay group." - */ - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) | - LRADC_DELAY_TRIGGER_DELAYS(0) | - LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | - LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), - LRADC_DELAY(3)); - - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1); - - /* - * after changing the touchscreen plates setting - * the signals need some initial time to settle. Start the - * SoC's delay unit and start the conversion later - * and automatically. - */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ - LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ - LRADC_DELAY_KICK | - LRADC_DELAY_DELAY(lradc->settling_delay), - LRADC_DELAY(2)); -} - -/* - * Pressure detection is special: - * We want to do both required measurements for the pressure detection in - * one turn. Use the hardware features to chain both conversions and let the - * hardware report one interrupt if both conversions are done - */ -static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1, - unsigned ch2) -{ - u32 reg; - - /* - * prepare for oversampling conversion - * - * from the datasheet: - * "The ACCUMULATE bit in the appropriate channel register - * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; - * otherwise, the IRQs will not fire." - */ - reg = LRADC_CH_ACCUMULATE | - LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1); - mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1)); - mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2)); - - /* - * from the datasheet: - * "Software must clear this register in preparation for a - * multi-cycle accumulation. - */ - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1)); - mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2)); - - /* prepare the delay/loop unit according to the oversampling count */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(1 << ch1) | - LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */ - LRADC_DELAY_TRIGGER_DELAYS(0) | - LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) | - LRADC_DELAY_DELAY(lradc->over_sample_delay - 1), - LRADC_DELAY(3)); - - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1); - - /* - * after changing the touchscreen plates setting - * the signals need some initial time to settle. Start the - * SoC's delay unit and start the conversion later - * and automatically. - */ - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ - LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ - LRADC_DELAY_KICK | - LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2)); -} - -static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc, - unsigned channel) -{ - u32 reg; - unsigned num_samples, val; - - reg = readl(lradc->base + LRADC_CH(channel)); - if (reg & LRADC_CH_ACCUMULATE) - num_samples = lradc->over_sample_cnt; - else - num_samples = 1; - - val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET; - return val / num_samples; -} - -static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc, - unsigned ch1, unsigned ch2) -{ - u32 reg, mask; - unsigned pressure, m1, m2; - - mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2); - reg = readl(lradc->base + LRADC_CTRL1) & mask; - - while (reg != mask) { - reg = readl(lradc->base + LRADC_CTRL1) & mask; - dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg); - } - - m1 = mxs_lradc_read_raw_channel(lradc, ch1); - m2 = mxs_lradc_read_raw_channel(lradc, ch2); - - if (m2 == 0) { - dev_warn(lradc->dev, "Cannot calculate pressure\n"); - return 1 << (LRADC_RESOLUTION - 1); - } - - /* simply scale the value from 0 ... max ADC resolution */ - pressure = m1; - pressure *= (1 << LRADC_RESOLUTION); - pressure /= m2; - - dev_dbg(lradc->dev, "Pressure = %u\n", pressure); - return pressure; -} - -#define TS_CH_XP 2 -#define TS_CH_YP 3 -#define TS_CH_XM 4 -#define TS_CH_YM 5 - -/* - * YP(open)--+-------------+ - * | |--+ - * | | | - * YM(-)--+-------------+ | - * +--------------+ - * | | - * XP(weak+) XM(open) - * - * "weak+" means 200k Ohm VDDIO - * (-) means GND - */ -static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc) -{ - /* - * In order to detect a touch event the 'touch detect enable' bit - * enables: - * - a weak pullup to the X+ connector - * - a strong ground at the Y- connector - */ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc), - LRADC_CTRL0); -} - -/* - * YP(meas)--+-------------+ - * | |--+ - * | | | - * YM(open)--+-------------+ | - * +--------------+ - * | | - * XP(+) XM(-) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_X; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP); - mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); -} - -/* - * YP(+)--+-------------+ - * | |--+ - * | | | - * YM(-)--+-------------+ | - * +--------------+ - * | | - * XP(open) XM(meas) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_Y; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM); - mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1); -} - -/* - * YP(+)--+-------------+ - * | |--+ - * | | | - * YM(meas)--+-------------+ | - * +--------------+ - * | | - * XP(meas) XM(-) - * - * (+) means here 1.85 V - * (-) means here GND - */ -static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); - mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0); - - lradc->cur_plate = LRADC_SAMPLE_PRESSURE; - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM); - mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP); - mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2, - TOUCHSCREEN_VCHANNEL1); -} - -static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc) -{ - /* Configure the touchscreen type */ - if (lradc->soc == IMX28_LRADC) { - mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) - mxs_lradc_reg_set(lradc, - LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, - LRADC_CTRL0); - } - - mxs_lradc_setup_touch_detection(lradc); - - lradc->cur_plate = LRADC_TOUCH; - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); - mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); -} - -static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc) -{ - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, - LRADC_CTRL1); - mxs_lradc_reg_set(lradc, - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), - LRADC_CTRL1); - /* - * start with the Y-pos, because it uses nearly the same plate - * settings like the touch detection - */ - mxs_lradc_prepare_y_pos(lradc); -} - -static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc) -{ - input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos); - input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos); - input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure); - input_report_key(lradc->ts_input, BTN_TOUCH, 1); - input_sync(lradc->ts_input); -} - -static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc) -{ - mxs_lradc_setup_touch_detection(lradc); - lradc->cur_plate = LRADC_SAMPLE_VALID; - /* - * start a dummy conversion to burn time to settle the signals - * note: we are not interested in the conversion's value - */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1)); - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), - LRADC_CTRL1); - mxs_lradc_reg_wrt( - lradc, - LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) | - LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ - LRADC_DELAY(2)); -} - -/* - * in order to avoid false measurements, report only samples where - * the surface is still touched after the position measurement - */ -static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid) -{ - /* if it is still touched, report the sample */ - if (valid && mxs_lradc_check_touch_event(lradc)) { - lradc->ts_valid = true; - mxs_lradc_report_ts_event(lradc); - } - - /* if it is even still touched, continue with the next measurement */ - if (mxs_lradc_check_touch_event(lradc)) { - mxs_lradc_prepare_y_pos(lradc); - return; - } - - if (lradc->ts_valid) { - /* signal the release */ - lradc->ts_valid = false; - input_report_key(lradc->ts_input, BTN_TOUCH, 0); - input_sync(lradc->ts_input); - } - - /* if it is released, wait for the next touch via IRQ */ - lradc->cur_plate = LRADC_TOUCH; - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - mxs_lradc_reg_clear(lradc, - LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), - LRADC_CTRL1); - mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); -} - -/* touchscreen's state machine */ -static void mxs_lradc_handle_touch(struct mxs_lradc *lradc) -{ - switch (lradc->cur_plate) { - case LRADC_TOUCH: - if (mxs_lradc_check_touch_event(lradc)) - mxs_lradc_start_touch_event(lradc); - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ, - LRADC_CTRL1); - return; - - case LRADC_SAMPLE_Y: - lradc->ts_y_pos = - mxs_lradc_read_raw_channel(lradc, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_prepare_x_pos(lradc); - return; - - case LRADC_SAMPLE_X: - lradc->ts_x_pos = - mxs_lradc_read_raw_channel(lradc, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_prepare_pressure(lradc); - return; - - case LRADC_SAMPLE_PRESSURE: - lradc->ts_pressure = - mxs_lradc_read_ts_pressure(lradc, - TOUCHSCREEN_VCHANNEL2, - TOUCHSCREEN_VCHANNEL1); - mxs_lradc_complete_touch_event(lradc); - return; - - case LRADC_SAMPLE_VALID: - mxs_lradc_finish_touch_event(lradc, 1); - break; - } -} - -/* - * Raw I/O operations - */ -static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - int ret; - - /* - * See if there is no buffered operation in progress. If there is, simply - * bail out. This can be improved to support both buffered and raw IO at - * the same time, yet the code becomes horribly complicated. Therefore I - * applied KISS principle here. - */ - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - reinit_completion(&lradc->completion); - - /* - * No buffered operation in progress, map the channel and trigger it. - * Virtual channel 0 is always used here as the others are always not - * used if doing raw sampling. - */ - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), - LRADC_CTRL1); - mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0); - - /* Enable / disable the divider per requirement */ - if (test_bit(chan, &lradc->is_divided)) - mxs_lradc_reg_set(lradc, - 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - LRADC_CTRL2); - else - mxs_lradc_reg_clear(lradc, - 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - LRADC_CTRL2); - - /* Clean the slot's previous content, then set new one. */ - mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), - LRADC_CTRL4); - mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4); - - mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0)); - - /* Enable the IRQ and start sampling the channel. */ - mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); - mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0); - - /* Wait for completion on the channel, 1 second max. */ - ret = wait_for_completion_killable_timeout(&lradc->completion, HZ); - if (!ret) - ret = -ETIMEDOUT; - if (ret < 0) - goto err; - - /* Read the data. */ - *val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; - ret = IIO_VAL_INT; - -err: - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); - - mutex_unlock(&lradc->lock); - - return ret; -} - -static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val) -{ - int ret, min, max; - - ret = mxs_lradc_read_single(iio_dev, 8, &min); - if (ret != IIO_VAL_INT) - return ret; - - ret = mxs_lradc_read_single(iio_dev, 9, &max); - if (ret != IIO_VAL_INT) - return ret; - - *val = max - min; - - return IIO_VAL_INT; -} - -static int mxs_lradc_read_raw(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - int *val, int *val2, long m) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - - switch (m) { - case IIO_CHAN_INFO_RAW: - if (chan->type == IIO_TEMP) - return mxs_lradc_read_temp(iio_dev, val); - - return mxs_lradc_read_single(iio_dev, chan->channel, val); - - case IIO_CHAN_INFO_SCALE: - if (chan->type == IIO_TEMP) { - /* - * From the datasheet, we have to multiply by 1.012 and - * divide by 4 - */ - *val = 0; - *val2 = 253000; - return IIO_VAL_INT_PLUS_MICRO; - } - - *val = lradc->vref_mv[chan->channel]; - *val2 = chan->scan_type.realbits - - test_bit(chan->channel, &lradc->is_divided); - return IIO_VAL_FRACTIONAL_LOG2; - - case IIO_CHAN_INFO_OFFSET: - if (chan->type == IIO_TEMP) { - /* - * The calculated value from the ADC is in Kelvin, we - * want Celsius for hwmon so the offset is -273.15 - * The offset is applied before scaling so it is - * actually -213.15 * 4 / 1.012 = -1079.644268 - */ - *val = -1079; - *val2 = 644268; - - return IIO_VAL_INT_PLUS_MICRO; - } - - return -EINVAL; - - default: - break; - } - - return -EINVAL; -} - -static int mxs_lradc_write_raw(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - int val, int val2, long m) -{ - struct mxs_lradc *lradc = iio_priv(iio_dev); - struct mxs_lradc_scale *scale_avail = - lradc->scale_avail[chan->channel]; - int ret; - - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - switch (m) { - case IIO_CHAN_INFO_SCALE: - ret = -EINVAL; - if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && - val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { - /* divider by two disabled */ - clear_bit(chan->channel, &lradc->is_divided); - ret = 0; - } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && - val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { - /* divider by two enabled */ - set_bit(chan->channel, &lradc->is_divided); - ret = 0; - } - - break; - default: - ret = -EINVAL; - break; - } - - mutex_unlock(&lradc->lock); - - return ret; -} - -static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev, - const struct iio_chan_spec *chan, - long m) -{ - return IIO_VAL_INT_PLUS_NANO; -} - -static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev, - struct device_attribute *attr, - char *buf, - int ch) -{ - struct iio_dev *iio = dev_to_iio_dev(dev); - struct mxs_lradc *lradc = iio_priv(iio); - int i, len = 0; - - for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++) - len += sprintf(buf + len, "%u.%09u ", - lradc->scale_avail[ch][i].integer, - lradc->scale_avail[ch][i].nano); - - len += sprintf(buf + len, "\n"); - - return len; -} - -static ssize_t mxs_lradc_show_scale_available(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); - - return mxs_lradc_show_scale_available_ch(dev, attr, buf, - iio_attr->address); -} - -#define SHOW_SCALE_AVAILABLE_ATTR(ch) \ -static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO, \ - mxs_lradc_show_scale_available, NULL, ch) - -SHOW_SCALE_AVAILABLE_ATTR(0); -SHOW_SCALE_AVAILABLE_ATTR(1); -SHOW_SCALE_AVAILABLE_ATTR(2); -SHOW_SCALE_AVAILABLE_ATTR(3); -SHOW_SCALE_AVAILABLE_ATTR(4); -SHOW_SCALE_AVAILABLE_ATTR(5); -SHOW_SCALE_AVAILABLE_ATTR(6); -SHOW_SCALE_AVAILABLE_ATTR(7); -SHOW_SCALE_AVAILABLE_ATTR(10); -SHOW_SCALE_AVAILABLE_ATTR(11); -SHOW_SCALE_AVAILABLE_ATTR(12); -SHOW_SCALE_AVAILABLE_ATTR(13); -SHOW_SCALE_AVAILABLE_ATTR(14); -SHOW_SCALE_AVAILABLE_ATTR(15); - -static struct attribute *mxs_lradc_attributes[] = { - &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage2_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage3_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage4_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage5_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage6_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage7_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage10_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage11_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage12_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage13_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage14_scale_available.dev_attr.attr, - &iio_dev_attr_in_voltage15_scale_available.dev_attr.attr, - NULL -}; - -static const struct attribute_group mxs_lradc_attribute_group = { - .attrs = mxs_lradc_attributes, -}; - -static const struct iio_info mxs_lradc_iio_info = { - .driver_module = THIS_MODULE, - .read_raw = mxs_lradc_read_raw, - .write_raw = mxs_lradc_write_raw, - .write_raw_get_fmt = mxs_lradc_write_raw_get_fmt, - .attrs = &mxs_lradc_attribute_group, -}; - -static int mxs_lradc_ts_open(struct input_dev *dev) -{ - struct mxs_lradc *lradc = input_get_drvdata(dev); - - /* Enable the touch-detect circuitry. */ - mxs_lradc_enable_touch_detection(lradc); - - return 0; -} - -static void mxs_lradc_disable_ts(struct mxs_lradc *lradc) -{ - /* stop all interrupts from firing */ - mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); - - /* Power-down touchscreen touch-detect circuitry. */ - mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); -} - -static void mxs_lradc_ts_close(struct input_dev *dev) -{ - struct mxs_lradc *lradc = input_get_drvdata(dev); - - mxs_lradc_disable_ts(lradc); -} - -static int mxs_lradc_ts_register(struct mxs_lradc *lradc) -{ - struct input_dev *input; - struct device *dev = lradc->dev; - - if (!lradc->use_touchscreen) - return 0; - - input = devm_input_allocate_device(dev); - if (!input) - return -ENOMEM; - - input->name = DRIVER_NAME; - input->id.bustype = BUS_HOST; - input->open = mxs_lradc_ts_open; - input->close = mxs_lradc_ts_close; - - __set_bit(EV_ABS, input->evbit); - __set_bit(EV_KEY, input->evbit); - __set_bit(BTN_TOUCH, input->keybit); - __set_bit(INPUT_PROP_DIRECT, input->propbit); - input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); - input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); - input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, - 0, 0); - - lradc->ts_input = input; - input_set_drvdata(input, lradc); - - return input_register_device(input); -} - -/* - * IRQ Handling - */ -static irqreturn_t mxs_lradc_handle_irq(int irq, void *data) -{ - struct iio_dev *iio = data; - struct mxs_lradc *lradc = iio_priv(iio); - unsigned long reg = readl(lradc->base + LRADC_CTRL1); - u32 clr_irq = mxs_lradc_irq_mask(lradc); - const u32 ts_irq_mask = - LRADC_CTRL1_TOUCH_DETECT_IRQ | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2); - - if (!(reg & mxs_lradc_irq_mask(lradc))) - return IRQ_NONE; - - if (lradc->use_touchscreen && (reg & ts_irq_mask)) { - mxs_lradc_handle_touch(lradc); - - /* Make sure we don't clear the next conversion's interrupt. */ - clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | - LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); - } - - if (iio_buffer_enabled(iio)) { - if (reg & lradc->buffer_vchans) - iio_trigger_poll(iio->trig); - } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { - complete(&lradc->completion); - } - - mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1); - - return IRQ_HANDLED; -} - -/* - * Trigger handling - */ -static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct iio_dev *iio = pf->indio_dev; - struct mxs_lradc *lradc = iio_priv(iio); - const u32 chan_value = LRADC_CH_ACCUMULATE | - ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - unsigned int i, j = 0; - - for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { - lradc->buffer[j] = readl(lradc->base + LRADC_CH(j)); - mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j)); - lradc->buffer[j] &= LRADC_CH_VALUE_MASK; - lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; - j++; - } - - iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp); - - iio_trigger_notify_done(iio->trig); - - return IRQ_HANDLED; -} - -static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state) -{ - struct iio_dev *iio = iio_trigger_get_drvdata(trig); - struct mxs_lradc *lradc = iio_priv(iio); - const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; - - mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st); - - return 0; -} - -static const struct iio_trigger_ops mxs_lradc_trigger_ops = { - .owner = THIS_MODULE, - .set_trigger_state = &mxs_lradc_configure_trigger, -}; - -static int mxs_lradc_trigger_init(struct iio_dev *iio) -{ - int ret; - struct iio_trigger *trig; - struct mxs_lradc *lradc = iio_priv(iio); - - trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id); - if (!trig) - return -ENOMEM; - - trig->dev.parent = lradc->dev; - iio_trigger_set_drvdata(trig, iio); - trig->ops = &mxs_lradc_trigger_ops; - - ret = iio_trigger_register(trig); - if (ret) { - iio_trigger_free(trig); - return ret; - } - - lradc->trig = trig; - - return 0; -} - -static void mxs_lradc_trigger_remove(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - - iio_trigger_unregister(lradc->trig); - iio_trigger_free(lradc->trig); -} - -static int mxs_lradc_buffer_preenable(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - int ret = 0, chan, ofs = 0; - unsigned long enable = 0; - u32 ctrl4_set = 0; - u32 ctrl4_clr = 0; - u32 ctrl1_irq = 0; - const u32 chan_value = LRADC_CH_ACCUMULATE | - ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); - const int len = bitmap_weight(iio->active_scan_mask, - LRADC_MAX_TOTAL_CHANS); - - if (!len) - return -EINVAL; - - /* - * Lock the driver so raw access can not be done during buffered - * operation. This simplifies the code a lot. - */ - ret = mutex_trylock(&lradc->lock); - if (!ret) - return -EBUSY; - - lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL); - if (!lradc->buffer) { - ret = -ENOMEM; - goto err_mem; - } - - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear( - lradc, - lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, - LRADC_CTRL1); - mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); - - for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { - ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); - ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); - ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); - mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs)); - bitmap_set(&enable, ofs, 1); - ofs++; - } - - mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | - LRADC_DELAY_KICK, LRADC_DELAY(0)); - mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4); - mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4); - mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1); - mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, - LRADC_DELAY(0)); - - return 0; - -err_mem: - mutex_unlock(&lradc->lock); - return ret; -} - -static int mxs_lradc_buffer_postdisable(struct iio_dev *iio) -{ - struct mxs_lradc *lradc = iio_priv(iio); - - mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK | - LRADC_DELAY_KICK, LRADC_DELAY(0)); - - mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0); - if (lradc->soc == IMX28_LRADC) - mxs_lradc_reg_clear( - lradc, - lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, - LRADC_CTRL1); - - kfree(lradc->buffer); - mutex_unlock(&lradc->lock); - - return 0; -} - -static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio, - const unsigned long *mask) -{ - struct mxs_lradc *lradc = iio_priv(iio); - const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS); - int rsvd_chans = 0; - unsigned long rsvd_mask = 0; - - if (lradc->use_touchbutton) - rsvd_mask |= CHAN_MASK_TOUCHBUTTON; - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE) - rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE; - if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) - rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE; - - if (lradc->use_touchbutton) - rsvd_chans++; - if (lradc->use_touchscreen) - rsvd_chans += 2; - - /* Test for attempts to map channels with special mode of operation. */ - if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) - return false; - - /* Test for attempts to map more channels then available slots. */ - if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS) - return false; - - return true; -} - -static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = { - .preenable = &mxs_lradc_buffer_preenable, - .postenable = &iio_triggered_buffer_postenable, - .predisable = &iio_triggered_buffer_predisable, - .postdisable = &mxs_lradc_buffer_postdisable, - .validate_scan_mask = &mxs_lradc_validate_scan_mask, -}; - -/* - * Driver initialization - */ - -#define MXS_ADC_CHAN(idx, chan_type, name) { \ - .type = (chan_type), \ - .indexed = 1, \ - .scan_index = (idx), \ - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_SCALE), \ - .channel = (idx), \ - .address = (idx), \ - .scan_type = { \ - .sign = 'u', \ - .realbits = LRADC_RESOLUTION, \ - .storagebits = 32, \ - }, \ - .datasheet_name = (name), \ -} - -static const struct iio_chan_spec mx23_lradc_chan_spec[] = { - MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), - MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), - MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), - MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), - MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), - MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), - MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"), - MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), - /* Combined Temperature sensors */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = 8, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE), - .channel = 8, - .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, - .datasheet_name = "TEMP_DIE", - }, - /* Hidden channel to keep indexes */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = -1, - .channel = 9, - }, - MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL), - MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL), - MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"), - MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"), - MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), - MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), -}; - -static const struct iio_chan_spec mx28_lradc_chan_spec[] = { - MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), - MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), - MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), - MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), - MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), - MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), - MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"), - MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), - /* Combined Temperature sensors */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = 8, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | - BIT(IIO_CHAN_INFO_OFFSET) | - BIT(IIO_CHAN_INFO_SCALE), - .channel = 8, - .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, - .datasheet_name = "TEMP_DIE", - }, - /* Hidden channel to keep indexes */ - { - .type = IIO_TEMP, - .indexed = 1, - .scan_index = -1, - .channel = 9, - }, - MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"), - MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"), - MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"), - MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"), - MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), - MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), -}; - -static void mxs_lradc_hw_init(struct mxs_lradc *lradc) -{ - /* The ADC always uses DELAY CHANNEL 0. */ - const u32 adc_cfg = - (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | - (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); - - /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ - mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0)); - - /* Disable remaining DELAY CHANNELs */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2)); - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3)); - - /* Start internal temperature sensing. */ - mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2); -} - -static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) -{ - int i; - - mxs_lradc_reg_clear(lradc, - lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, - LRADC_CTRL1); - - for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) - mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i)); -} - -static const struct of_device_id mxs_lradc_dt_ids[] = { - { .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, }, - { .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids); - -static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc, - struct device_node *lradc_node) -{ - int ret; - u32 ts_wires = 0, adapt; - - ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires", - &ts_wires); - if (ret) - return -ENODEV; /* touchscreen feature disabled */ - - switch (ts_wires) { - case 4: - lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE; - break; - case 5: - if (lradc->soc == IMX28_LRADC) { - lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE; - break; - } - /* fall through an error message for i.MX23 */ - default: - dev_err(lradc->dev, - "Unsupported number of touchscreen wires (%d)\n", - ts_wires); - return -EINVAL; - } - - if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) { - lradc->over_sample_cnt = 4; - } else { - if (adapt < 1 || adapt > 32) { - dev_err(lradc->dev, "Invalid sample count (%u)\n", - adapt); - return -EINVAL; - } - lradc->over_sample_cnt = adapt; - } - - if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) { - lradc->over_sample_delay = 2; - } else { - if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) { - dev_err(lradc->dev, "Invalid sample delay (%u)\n", - adapt); - return -EINVAL; - } - lradc->over_sample_delay = adapt; - } - - if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) { - lradc->settling_delay = 10; - } else { - if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) { - dev_err(lradc->dev, "Invalid settling delay (%u)\n", - adapt); - return -EINVAL; - } - lradc->settling_delay = adapt; - } - - return 0; -} - -static int mxs_lradc_probe(struct platform_device *pdev) -{ - const struct of_device_id *of_id = - of_match_device(mxs_lradc_dt_ids, &pdev->dev); - const struct mxs_lradc_of_config *of_cfg = - &mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data]; - struct device *dev = &pdev->dev; - struct device_node *node = dev->of_node; - struct mxs_lradc *lradc; - struct iio_dev *iio; - struct resource *iores; - int ret = 0, touch_ret; - int i, s; - u64 scale_uv; - - /* Allocate the IIO device. */ - iio = devm_iio_device_alloc(dev, sizeof(*lradc)); - if (!iio) { - dev_err(dev, "Failed to allocate IIO device\n"); - return -ENOMEM; - } - - lradc = iio_priv(iio); - lradc->soc = (enum mxs_lradc_id)of_id->data; - - /* Grab the memory area */ - iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); - lradc->dev = &pdev->dev; - lradc->base = devm_ioremap_resource(dev, iores); - if (IS_ERR(lradc->base)) - return PTR_ERR(lradc->base); - - lradc->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(lradc->clk)) { - dev_err(dev, "Failed to get the delay unit clock\n"); - return PTR_ERR(lradc->clk); - } - ret = clk_prepare_enable(lradc->clk); - if (ret != 0) { - dev_err(dev, "Failed to enable the delay unit clock\n"); - return ret; - } - - touch_ret = mxs_lradc_probe_touchscreen(lradc, node); - - if (touch_ret == 0) - lradc->buffer_vchans = BUFFER_VCHANS_LIMITED; - else - lradc->buffer_vchans = BUFFER_VCHANS_ALL; - - /* Grab all IRQ sources */ - for (i = 0; i < of_cfg->irq_count; i++) { - lradc->irq[i] = platform_get_irq(pdev, i); - if (lradc->irq[i] < 0) { - ret = lradc->irq[i]; - goto err_clk; - } - - ret = devm_request_irq(dev, lradc->irq[i], - mxs_lradc_handle_irq, 0, - of_cfg->irq_name[i], iio); - if (ret) - goto err_clk; - } - - lradc->vref_mv = of_cfg->vref_mv; - - platform_set_drvdata(pdev, iio); - - init_completion(&lradc->completion); - mutex_init(&lradc->lock); - - iio->name = pdev->name; - iio->dev.parent = &pdev->dev; - iio->info = &mxs_lradc_iio_info; - iio->modes = INDIO_DIRECT_MODE; - iio->masklength = LRADC_MAX_TOTAL_CHANS; - - if (lradc->soc == IMX23_LRADC) { - iio->channels = mx23_lradc_chan_spec; - iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec); - } else { - iio->channels = mx28_lradc_chan_spec; - iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec); - } - - ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, - &mxs_lradc_trigger_handler, - &mxs_lradc_buffer_ops); - if (ret) - goto err_clk; - - ret = mxs_lradc_trigger_init(iio); - if (ret) - goto err_trig; - - /* Populate available ADC input ranges */ - for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) { - for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) { - /* - * [s=0] = optional divider by two disabled (default) - * [s=1] = optional divider by two enabled - * - * The scale is calculated by doing: - * Vref >> (realbits - s) - * which multiplies by two on the second component - * of the array. - */ - scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >> - (LRADC_RESOLUTION - s); - lradc->scale_avail[i][s].nano = - do_div(scale_uv, 100000000) * 10; - lradc->scale_avail[i][s].integer = scale_uv; - } - } - - ret = stmp_reset_block(lradc->base); - if (ret) - goto err_dev; - - /* Configure the hardware. */ - mxs_lradc_hw_init(lradc); - - /* Register the touchscreen input device. */ - if (touch_ret == 0) { - ret = mxs_lradc_ts_register(lradc); - if (ret) - goto err_ts_register; - } - - /* Register IIO device. */ - ret = iio_device_register(iio); - if (ret) { - dev_err(dev, "Failed to register IIO device\n"); - return ret; - } - - return 0; - -err_ts_register: - mxs_lradc_hw_stop(lradc); -err_dev: - mxs_lradc_trigger_remove(iio); -err_trig: - iio_triggered_buffer_cleanup(iio); -err_clk: - clk_disable_unprepare(lradc->clk); - return ret; -} - -static int mxs_lradc_remove(struct platform_device *pdev) -{ - struct iio_dev *iio = platform_get_drvdata(pdev); - struct mxs_lradc *lradc = iio_priv(iio); - - iio_device_unregister(iio); - mxs_lradc_hw_stop(lradc); - mxs_lradc_trigger_remove(iio); - iio_triggered_buffer_cleanup(iio); - - clk_disable_unprepare(lradc->clk); - - return 0; -} - -static struct platform_driver mxs_lradc_driver = { - .driver = { - .name = DRIVER_NAME, - .of_match_table = mxs_lradc_dt_ids, - }, - .probe = mxs_lradc_probe, - .remove = mxs_lradc_remove, -}; - -module_platform_driver(mxs_lradc_driver); - -MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); -MODULE_DESCRIPTION("Freescale MXS LRADC driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:" DRIVER_NAME); -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
[parent not found: <cover.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* [PATCH v10 2/5] iio: adc: mxs-lradc: Add support for adc driver [not found] ` <cover.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-11-20 10:57 ` Ksenija Stanojevic 2016-11-20 10:57 ` [PATCH v10 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen Ksenija Stanojevic 2016-11-20 10:57 ` [PATCH v10 5/5] mfd: Move binding document Ksenija Stanojevic 2 siblings, 0 replies; 8+ messages in thread From: Ksenija Stanojevic @ 2016-11-20 10:57 UTC (permalink / raw) To: linux-kernel-u79uwXL29TY76Z2rM5mHXA Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A, dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w, linux-input-u79uwXL29TY76Z2rM5mHXA, jic23-DgEjT+Ai2ygdnm+yROfE0A, knaack.h-Mmb7MZpHnFY, lars-Qo5EllUWu/uELgA04lAiVw, pmeerw-jW+XmwGofnusTnJN9+BGXg, marex-ynQEQJNshbs, linux-iio-u79uwXL29TY76Z2rM5mHXA, harald-95f8Dae0BrPYtjvyW6yDsg, stefan.wahren-eS4NqCHxEME, fabio.estevam-KZfg59tc24xl57MIdRCFDg, Ksenija Stanojevic Add support for sixteen-channel 12-bit resolution ADC and its functions, which include general-purpose ADC readings, battery voltage measurement, and die temperature measurement. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Reviewed-by: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> --- Changes in v10: - none Changes in v9: - none Changes in v8: - rebase onto 4.9-rc1 Changes in v7: - none Changes in v6: - update copyright Changes in v5: - add field void __iomem *base to struct mxs_lradc_adc - change arguments in all functions for accessing I/O memory to follow the previous change. - use devm_ioremap for mapping I/O memory Changes in v4: - update copyright - use platform_get_irq_byname - use irq_of_parse_and_map Changes in v3: - make buffer large enough for timestamps - remove unnecessary blank lines Changes in v2: - improve commit message - do not change spacing in Kconfig - impove formating - remove wrapper show_scale_avail - use correct syntax for comments - use devm_iio_trigger_alloc - do not allocate buffer dynamically - use iio_device_claim_*_mode helpers - add spinlock in struct mxs_lradc_ts to enable locking in interrupt handler - only grab irqs that are relevant to adc - remove blank line at the end of the file - change licence to GPL - add copyright drivers/iio/adc/Kconfig | 13 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/mxs-lradc-adc.c | 845 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 859 insertions(+) create mode 100644 drivers/iio/adc/mxs-lradc-adc.c diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 57ebb99..ad6046a 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -219,6 +219,19 @@ config EXYNOS_ADC To compile this driver as a module, choose M here: the module will be called exynos_adc. +config MXS_LRADC_ADC + tristate "Freescale i.MX23/i.MX28 LRADC ADC" + depends on MFD_MXS_LRADC + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the ADC functions of the + i.MX23/i.MX28 LRADC. This includes general-purpose ADC readings, + battery voltage measurement, and die temperature measurement. + + This driver can also be built as a module. If so, the module will be + called mxs-lradc-adc. + config FSL_MX25_ADC tristate "Freescale MX25 ADC driver" depends on MFD_MX25_TSADC diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 96894b3..4b2cf9b 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o obj-$(CONFIG_MCP3422) += mcp3422.o obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o +obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_NAU7802) += nau7802.o obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o diff --git a/drivers/iio/adc/mxs-lradc-adc.c b/drivers/iio/adc/mxs-lradc-adc.c new file mode 100644 index 0000000..6943220 --- /dev/null +++ b/drivers/iio/adc/mxs-lradc-adc.c @@ -0,0 +1,845 @@ +/* + * Freescale MXS LRADC ADC driver + * + * Copyright (c) 2012 DENX Software Engineering, GmbH. + * Copyright (c) 2016 Ksenija Stanojevic <ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * + * Authors: + * Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> + * Ksenija Stanojevic <ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/mfd/core.h> +#include <linux/mfd/mxs-lradc.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/sysfs.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/sysfs.h> + +/* + * Make this runtime configurable if necessary. Currently, if the buffered mode + * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before + * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000) + * seconds. The result is that the samples arrive every 500mS. + */ +#define LRADC_DELAY_TIMER_PER 200 +#define LRADC_DELAY_TIMER_LOOP 5 + +#define VREF_MV_BASE 1850 + +const char *mx23_lradc_adc_irq_names[] = { + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", +}; + +const char *mx28_lradc_adc_irq_names[] = { + "mxs-lradc-thresh0", + "mxs-lradc-thresh1", + "mxs-lradc-channel0", + "mxs-lradc-channel1", + "mxs-lradc-channel2", + "mxs-lradc-channel3", + "mxs-lradc-channel4", + "mxs-lradc-channel5", + "mxs-lradc-button0", + "mxs-lradc-button1", +}; + +static const u32 mxs_lradc_adc_vref_mv[][LRADC_MAX_TOTAL_CHANS] = { + [IMX23_LRADC] = { + VREF_MV_BASE, /* CH0 */ + VREF_MV_BASE, /* CH1 */ + VREF_MV_BASE, /* CH2 */ + VREF_MV_BASE, /* CH3 */ + VREF_MV_BASE, /* CH4 */ + VREF_MV_BASE, /* CH5 */ + VREF_MV_BASE * 2, /* CH6 VDDIO */ + VREF_MV_BASE * 4, /* CH7 VBATT */ + VREF_MV_BASE, /* CH8 Temp sense 0 */ + VREF_MV_BASE, /* CH9 Temp sense 1 */ + VREF_MV_BASE, /* CH10 */ + VREF_MV_BASE, /* CH11 */ + VREF_MV_BASE, /* CH12 USB_DP */ + VREF_MV_BASE, /* CH13 USB_DN */ + VREF_MV_BASE, /* CH14 VBG */ + VREF_MV_BASE * 4, /* CH15 VDD5V */ + }, + [IMX28_LRADC] = { + VREF_MV_BASE, /* CH0 */ + VREF_MV_BASE, /* CH1 */ + VREF_MV_BASE, /* CH2 */ + VREF_MV_BASE, /* CH3 */ + VREF_MV_BASE, /* CH4 */ + VREF_MV_BASE, /* CH5 */ + VREF_MV_BASE, /* CH6 */ + VREF_MV_BASE * 4, /* CH7 VBATT */ + VREF_MV_BASE, /* CH8 Temp sense 0 */ + VREF_MV_BASE, /* CH9 Temp sense 1 */ + VREF_MV_BASE * 2, /* CH10 VDDIO */ + VREF_MV_BASE, /* CH11 VTH */ + VREF_MV_BASE * 2, /* CH12 VDDA */ + VREF_MV_BASE, /* CH13 VDDD */ + VREF_MV_BASE, /* CH14 VBG */ + VREF_MV_BASE * 4, /* CH15 VDD5V */ + }, +}; + +enum mxs_lradc_divbytwo { + MXS_LRADC_DIV_DISABLED = 0, + MXS_LRADC_DIV_ENABLED, +}; + +struct mxs_lradc_scale { + unsigned int integer; + unsigned int nano; +}; + +struct mxs_lradc_adc { + struct mxs_lradc *lradc; + struct device *dev; + + void __iomem *base; + u32 buffer[10]; + struct iio_trigger *trig; + struct completion completion; + spinlock_t lock; + + const u32 *vref_mv; + struct mxs_lradc_scale scale_avail[LRADC_MAX_TOTAL_CHANS][2]; + unsigned long is_divided; +}; + + +/* Raw I/O operations */ +static int mxs_lradc_adc_read_single(struct iio_dev *iio_dev, int chan, + int *val) +{ + struct mxs_lradc_adc *adc = iio_priv(iio_dev); + struct mxs_lradc *lradc = adc->lradc; + int ret; + + /* + * See if there is no buffered operation in progress. If there is simply + * bail out. This can be improved to support both buffered and raw IO at + * the same time, yet the code becomes horribly complicated. Therefore I + * applied KISS principle here. + */ + ret = iio_device_claim_direct_mode(iio_dev); + if (ret) + return ret; + + reinit_completion(&adc->completion); + + /* + * No buffered operation in progress, map the channel and trigger it. + * Virtual channel 0 is always used here as the others are always not + * used if doing raw sampling. + */ + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear(adc->base, LRADC_CTRL1_LRADC_IRQ_EN(0), + LRADC_CTRL1); + mxs_lradc_reg_clear(adc->base, 0x1, LRADC_CTRL0); + + /* Enable / disable the divider per requirement */ + if (test_bit(chan, &adc->is_divided)) + mxs_lradc_reg_set(adc->base, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + else + mxs_lradc_reg_clear(adc->base, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + + /* Clean the slot's previous content, then set new one. */ + mxs_lradc_reg_clear(adc->base, LRADC_CTRL4_LRADCSELECT_MASK(0), + LRADC_CTRL4); + mxs_lradc_reg_set(adc->base, chan, LRADC_CTRL4); + + mxs_lradc_reg_wrt(adc->base, 0, LRADC_CH(0)); + + /* Enable the IRQ and start sampling the channel. */ + mxs_lradc_reg_set(adc->base, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1); + mxs_lradc_reg_set(adc->base, BIT(0), LRADC_CTRL0); + + /* Wait for completion on the channel, 1 second max. */ + ret = wait_for_completion_killable_timeout(&adc->completion, HZ); + if (!ret) + ret = -ETIMEDOUT; + if (ret < 0) + goto err; + + /* Read the data. */ + *val = readl(adc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK; + ret = IIO_VAL_INT; + +err: + mxs_lradc_reg_clear(adc->base, LRADC_CTRL1_LRADC_IRQ_EN(0), + LRADC_CTRL1); + + iio_device_release_direct_mode(iio_dev); + + return ret; +} + +static int mxs_lradc_adc_read_temp(struct iio_dev *iio_dev, int *val) +{ + int ret, min, max; + + ret = mxs_lradc_adc_read_single(iio_dev, 8, &min); + if (ret != IIO_VAL_INT) + return ret; + + ret = mxs_lradc_adc_read_single(iio_dev, 9, &max); + if (ret != IIO_VAL_INT) + return ret; + + *val = max - min; + + return IIO_VAL_INT; +} + +static int mxs_lradc_adc_read_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long m) +{ + struct mxs_lradc_adc *adc = iio_priv(iio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + if (chan->type == IIO_TEMP) + return mxs_lradc_adc_read_temp(iio_dev, val); + + return mxs_lradc_adc_read_single(iio_dev, chan->channel, val); + + case IIO_CHAN_INFO_SCALE: + if (chan->type == IIO_TEMP) { + /* + * From the datasheet, we have to multiply by 1.012 and + * divide by 4 + */ + *val = 0; + *val2 = 253000; + return IIO_VAL_INT_PLUS_MICRO; + } + + *val = adc->vref_mv[chan->channel]; + *val2 = chan->scan_type.realbits - + test_bit(chan->channel, &adc->is_divided); + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_OFFSET: + if (chan->type == IIO_TEMP) { + /* + * The calculated value from the ADC is in Kelvin, we + * want Celsius for hwmon so the offset is -273.15 + * The offset is applied before scaling so it is + * actually -213.15 * 4 / 1.012 = -1079.644268 + */ + *val = -1079; + *val2 = 644268; + + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; + + default: + break; + } + + return -EINVAL; +} + +static int mxs_lradc_adc_write_raw(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long m) +{ + struct mxs_lradc_adc *adc = iio_priv(iio_dev); + struct mxs_lradc_scale *scale_avail = + adc->scale_avail[chan->channel]; + int ret; + + ret = iio_device_claim_direct_mode(iio_dev); + if (ret) + return ret; + + switch (m) { + case IIO_CHAN_INFO_SCALE: + ret = -EINVAL; + if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && + val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { + /* divider by two disabled */ + clear_bit(chan->channel, &adc->is_divided); + ret = 0; + } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && + val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { + /* divider by two enabled */ + set_bit(chan->channel, &adc->is_divided); + ret = 0; + } + + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return ret; +} + +static int mxs_lradc_adc_write_raw_get_fmt(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + long m) +{ + return IIO_VAL_INT_PLUS_NANO; +} + +static ssize_t mxs_lradc_adc_show_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *iio = dev_to_iio_dev(dev); + struct mxs_lradc_adc *adc = iio_priv(iio); + struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr); + int i, ch, len = 0; + + ch = iio_attr->address; + for (i = 0; i < ARRAY_SIZE(adc->scale_avail[ch]); i++) + len += sprintf(buf + len, "%u.%09u ", + adc->scale_avail[ch][i].integer, + adc->scale_avail[ch][i].nano); + + len += sprintf(buf + len, "\n"); + + return len; +} + +#define SHOW_SCALE_AVAILABLE_ATTR(ch) \ +static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO, \ + mxs_lradc_adc_show_scale_avail, NULL, ch) + +SHOW_SCALE_AVAILABLE_ATTR(0); +SHOW_SCALE_AVAILABLE_ATTR(1); +SHOW_SCALE_AVAILABLE_ATTR(2); +SHOW_SCALE_AVAILABLE_ATTR(3); +SHOW_SCALE_AVAILABLE_ATTR(4); +SHOW_SCALE_AVAILABLE_ATTR(5); +SHOW_SCALE_AVAILABLE_ATTR(6); +SHOW_SCALE_AVAILABLE_ATTR(7); +SHOW_SCALE_AVAILABLE_ATTR(10); +SHOW_SCALE_AVAILABLE_ATTR(11); +SHOW_SCALE_AVAILABLE_ATTR(12); +SHOW_SCALE_AVAILABLE_ATTR(13); +SHOW_SCALE_AVAILABLE_ATTR(14); +SHOW_SCALE_AVAILABLE_ATTR(15); + +static struct attribute *mxs_lradc_adc_attributes[] = { + &iio_dev_attr_in_voltage0_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage1_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage2_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage3_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage4_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage5_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage6_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage7_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage10_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage11_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage12_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage13_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage14_scale_available.dev_attr.attr, + &iio_dev_attr_in_voltage15_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group mxs_lradc_adc_attribute_group = { + .attrs = mxs_lradc_adc_attributes, +}; + +static const struct iio_info mxs_lradc_adc_iio_info = { + .driver_module = THIS_MODULE, + .read_raw = mxs_lradc_adc_read_raw, + .write_raw = mxs_lradc_adc_write_raw, + .write_raw_get_fmt = mxs_lradc_adc_write_raw_get_fmt, + .attrs = &mxs_lradc_adc_attribute_group, +}; + +/* IRQ Handling */ +static irqreturn_t mxs_lradc_adc_handle_irq(int irq, void *data) +{ + struct iio_dev *iio = data; + struct mxs_lradc_adc *adc = iio_priv(iio); + struct mxs_lradc *lradc = adc->lradc; + unsigned long reg = readl(adc->base + LRADC_CTRL1); + unsigned long flags; + + if (!(reg & mxs_lradc_irq_mask(lradc))) + return IRQ_NONE; + + if (iio_buffer_enabled(iio)) { + if (reg & lradc->buffer_vchans) { + spin_lock_irqsave(&adc->lock, flags); + iio_trigger_poll(iio->trig); + spin_unlock_irqrestore(&adc->lock, flags); + } + } else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) { + complete(&adc->completion); + } + + mxs_lradc_reg_clear(adc->base, reg & mxs_lradc_irq_mask(lradc), + LRADC_CTRL1); + + return IRQ_HANDLED; +} + + +/* Trigger handling */ +static irqreturn_t mxs_lradc_adc_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *iio = pf->indio_dev; + struct mxs_lradc_adc *adc = iio_priv(iio); + const u32 chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + unsigned int i, j = 0; + + for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { + adc->buffer[j] = readl(adc->base + LRADC_CH(j)); + mxs_lradc_reg_wrt(adc->base, chan_value, LRADC_CH(j)); + adc->buffer[j] &= LRADC_CH_VALUE_MASK; + adc->buffer[j] /= LRADC_DELAY_TIMER_LOOP; + j++; + } + + iio_push_to_buffers_with_timestamp(iio, adc->buffer, pf->timestamp); + + iio_trigger_notify_done(iio->trig); + + return IRQ_HANDLED; +} + +static int mxs_lradc_adc_configure_trigger(struct iio_trigger *trig, bool state) +{ + struct iio_dev *iio = iio_trigger_get_drvdata(trig); + struct mxs_lradc_adc *adc = iio_priv(iio); + const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR; + + mxs_lradc_reg_wrt(adc->base, LRADC_DELAY_KICK, LRADC_DELAY(0) + st); + + return 0; +} + +static const struct iio_trigger_ops mxs_lradc_adc_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = &mxs_lradc_adc_configure_trigger, +}; + +static int mxs_lradc_adc_trigger_init(struct iio_dev *iio) +{ + int ret; + struct iio_trigger *trig; + struct mxs_lradc_adc *adc = iio_priv(iio); + + trig = devm_iio_trigger_alloc(&iio->dev, "%s-dev%i", iio->name, + iio->id); + + trig->dev.parent = adc->dev; + iio_trigger_set_drvdata(trig, iio); + trig->ops = &mxs_lradc_adc_trigger_ops; + + ret = iio_trigger_register(trig); + if (ret) + return ret; + + adc->trig = trig; + + return 0; +} + +static void mxs_lradc_adc_trigger_remove(struct iio_dev *iio) +{ + struct mxs_lradc_adc *adc = iio_priv(iio); + + iio_trigger_unregister(adc->trig); +} + +static int mxs_lradc_adc_buffer_preenable(struct iio_dev *iio) +{ + struct mxs_lradc_adc *adc = iio_priv(iio); + struct mxs_lradc *lradc = adc->lradc; + int chan, ofs = 0; + unsigned long enable = 0; + u32 ctrl4_set = 0; + u32 ctrl4_clr = 0; + u32 ctrl1_irq = 0; + const u32 chan_value = LRADC_CH_ACCUMULATE | + ((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET); + + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear(adc->base, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + mxs_lradc_reg_clear(adc->base, lradc->buffer_vchans, LRADC_CTRL0); + + for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) { + ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs); + ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs); + ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs); + mxs_lradc_reg_wrt(adc->base, chan_value, LRADC_CH(ofs)); + bitmap_set(&enable, ofs, 1); + ofs++; + } + + mxs_lradc_reg_clear(adc->base, LRADC_DELAY_TRIGGER_LRADCS_MASK | + LRADC_DELAY_KICK, LRADC_DELAY(0)); + mxs_lradc_reg_clear(adc->base, ctrl4_clr, LRADC_CTRL4); + mxs_lradc_reg_set(adc->base, ctrl4_set, LRADC_CTRL4); + mxs_lradc_reg_set(adc->base, ctrl1_irq, LRADC_CTRL1); + mxs_lradc_reg_set(adc->base, + enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET, + LRADC_DELAY(0)); + + return 0; +} + +static int mxs_lradc_adc_buffer_postdisable(struct iio_dev *iio) +{ + struct mxs_lradc_adc *adc = iio_priv(iio); + struct mxs_lradc *lradc = adc->lradc; + + mxs_lradc_reg_clear(adc->base, LRADC_DELAY_TRIGGER_LRADCS_MASK | + LRADC_DELAY_KICK, LRADC_DELAY(0)); + + mxs_lradc_reg_clear(adc->base, lradc->buffer_vchans, LRADC_CTRL0); + if (lradc->soc == IMX28_LRADC) + mxs_lradc_reg_clear(adc->base, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + + return 0; +} + +static bool mxs_lradc_adc_validate_scan_mask(struct iio_dev *iio, + const unsigned long *mask) +{ + struct mxs_lradc_adc *adc = iio_priv(iio); + struct mxs_lradc *lradc = adc->lradc; + const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS); + int rsvd_chans = 0; + unsigned long rsvd_mask = 0; + + if (lradc->use_touchbutton) + rsvd_mask |= CHAN_MASK_TOUCHBUTTON; + if (lradc->touchscreen_wire == MXS_LRADC_TOUCHSCREEN_4WIRE) + rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE; + if (lradc->touchscreen_wire == MXS_LRADC_TOUCHSCREEN_5WIRE) + rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE; + + if (lradc->use_touchbutton) + rsvd_chans++; + if (lradc->touchscreen_wire) + rsvd_chans += 2; + + /* Test for attempts to map channels with special mode of operation. */ + if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS)) + return false; + + /* Test for attempts to map more channels then available slots. */ + if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS) + return false; + + return true; +} + +static const struct iio_buffer_setup_ops mxs_lradc_adc_buffer_ops = { + .preenable = &mxs_lradc_adc_buffer_preenable, + .postenable = &iio_triggered_buffer_postenable, + .predisable = &iio_triggered_buffer_predisable, + .postdisable = &mxs_lradc_adc_buffer_postdisable, + .validate_scan_mask = &mxs_lradc_adc_validate_scan_mask, +}; + +/* Driver initialization */ +#define MXS_ADC_CHAN(idx, chan_type, name) { \ + .type = (chan_type), \ + .indexed = 1, \ + .scan_index = (idx), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .channel = (idx), \ + .address = (idx), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = LRADC_RESOLUTION, \ + .storagebits = 32, \ + }, \ + .datasheet_name = (name), \ +} + +static const struct iio_chan_spec mx23_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), + MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), + MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), + MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), + MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), + MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), + MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"), + MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), + /* Combined Temperature sensors */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = 8, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = 8, + .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, + .datasheet_name = "TEMP_DIE", + }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, + MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL), + MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL), + MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"), + MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"), + MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), + MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), +}; + +static const struct iio_chan_spec mx28_lradc_chan_spec[] = { + MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"), + MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"), + MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"), + MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"), + MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"), + MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"), + MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"), + MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"), + /* Combined Temperature sensors */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = 8, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = 8, + .scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,}, + .datasheet_name = "TEMP_DIE", + }, + /* Hidden channel to keep indexes */ + { + .type = IIO_TEMP, + .indexed = 1, + .scan_index = -1, + .channel = 9, + }, + MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"), + MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"), + MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"), + MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"), + MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"), + MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"), +}; + +static void mxs_lradc_adc_hw_init(struct mxs_lradc_adc *adc) +{ + /* The ADC always uses DELAY CHANNEL 0. */ + const u32 adc_cfg = + (1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) | + (LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET); + + /* Configure DELAY CHANNEL 0 for generic ADC sampling. */ + mxs_lradc_reg_wrt(adc->base, adc_cfg, LRADC_DELAY(0)); + + /* + * Start internal temperature sensing by clearing bit + * HW_LRADC_CTRL2_TEMPSENSE_PWD. This bit can be left cleared + * after power up. + */ + mxs_lradc_reg_wrt(adc->base, 0, LRADC_CTRL2); +} + +static void mxs_lradc_adc_hw_stop(struct mxs_lradc_adc *adc) +{ + mxs_lradc_reg_wrt(adc->base, 0, LRADC_DELAY(0)); +} + +static int mxs_lradc_adc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mxs_lradc *lradc = dev_get_platdata(dev); + struct mxs_lradc_adc *adc; + struct iio_dev *iio; + struct resource *iores; + int ret, irq, virq, i, s, n; + u64 scale_uv; + const char **irq_name; + + /* Allocate the IIO device. */ + iio = devm_iio_device_alloc(dev, sizeof(*adc)); + if (!iio) { + dev_err(dev, "Failed to allocate IIO device\n"); + return -ENOMEM; + } + + adc = iio_priv(iio); + adc->lradc = lradc; + adc->dev = dev; + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + adc->base = devm_ioremap(dev, iores->start, resource_size(iores)); + if (IS_ERR(adc->base)) + return PTR_ERR(adc->base); + + init_completion(&adc->completion); + spin_lock_init(&adc->lock); + + platform_set_drvdata(pdev, iio); + + iio->name = pdev->name; + iio->dev.parent = dev; + iio->dev.of_node = dev->parent->of_node; + iio->info = &mxs_lradc_adc_iio_info; + iio->modes = INDIO_DIRECT_MODE; + iio->masklength = LRADC_MAX_TOTAL_CHANS; + + if (lradc->soc == IMX23_LRADC) { + iio->channels = mx23_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec); + irq_name = mx23_lradc_adc_irq_names; + n = ARRAY_SIZE(mx23_lradc_adc_irq_names); + } else { + iio->channels = mx28_lradc_chan_spec; + iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec); + irq_name = mx28_lradc_adc_irq_names; + n = ARRAY_SIZE(mx28_lradc_adc_irq_names); + } + + ret = stmp_reset_block(adc->base); + if (ret) + return ret; + + for (i = 0; i < n; i++) { + irq = platform_get_irq_byname(pdev, irq_name[i]); + if (irq < 0) + return irq; + + virq = irq_of_parse_and_map(dev->parent->of_node, irq); + + ret = devm_request_irq(dev, virq, mxs_lradc_adc_handle_irq, + 0, irq_name[i], iio); + if (ret) + return ret; + } + + ret = mxs_lradc_adc_trigger_init(iio); + if (ret) + goto err_trig; + + ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time, + &mxs_lradc_adc_trigger_handler, + &mxs_lradc_adc_buffer_ops); + if (ret) + return ret; + + adc->vref_mv = mxs_lradc_adc_vref_mv[lradc->soc]; + + /* Populate available ADC input ranges */ + for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) { + for (s = 0; s < ARRAY_SIZE(adc->scale_avail[i]); s++) { + /* + * [s=0] = optional divider by two disabled (default) + * [s=1] = optional divider by two enabled + * + * The scale is calculated by doing: + * Vref >> (realbits - s) + * which multiplies by two on the second component + * of the array. + */ + scale_uv = ((u64)adc->vref_mv[i] * 100000000) >> + (LRADC_RESOLUTION - s); + adc->scale_avail[i][s].nano = + do_div(scale_uv, 100000000) * 10; + adc->scale_avail[i][s].integer = scale_uv; + } + } + + /* Configure the hardware. */ + mxs_lradc_adc_hw_init(adc); + + /* Register IIO device. */ + ret = iio_device_register(iio); + if (ret) { + dev_err(dev, "Failed to register IIO device\n"); + goto err_dev; + } + + return 0; + +err_dev: + mxs_lradc_adc_hw_stop(adc); + mxs_lradc_adc_trigger_remove(iio); +err_trig: + iio_triggered_buffer_cleanup(iio); + return ret; +} + +static int mxs_lradc_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *iio = platform_get_drvdata(pdev); + struct mxs_lradc_adc *adc = iio_priv(iio); + + iio_device_unregister(iio); + mxs_lradc_adc_hw_stop(adc); + mxs_lradc_adc_trigger_remove(iio); + iio_triggered_buffer_cleanup(iio); + + return 0; +} + +static struct platform_driver mxs_lradc_adc_driver = { + .driver = { + .name = "mxs-lradc-adc", + }, + .probe = mxs_lradc_adc_probe, + .remove = mxs_lradc_adc_remove, +}; +module_platform_driver(mxs_lradc_adc_driver); + +MODULE_AUTHOR("Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>"); +MODULE_DESCRIPTION("Freescale MXS LRADC driver general purpose ADC driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-lradc-adc"); -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v10 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen [not found] ` <cover.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-11-20 10:57 ` [PATCH v10 2/5] iio: adc: mxs-lradc: Add support for adc driver Ksenija Stanojevic @ 2016-11-20 10:57 ` Ksenija Stanojevic 2016-11-20 10:57 ` [PATCH v10 5/5] mfd: Move binding document Ksenija Stanojevic 2 siblings, 0 replies; 8+ messages in thread From: Ksenija Stanojevic @ 2016-11-20 10:57 UTC (permalink / raw) To: linux-kernel-u79uwXL29TY76Z2rM5mHXA Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A, dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w, linux-input-u79uwXL29TY76Z2rM5mHXA, jic23-DgEjT+Ai2ygdnm+yROfE0A, knaack.h-Mmb7MZpHnFY, lars-Qo5EllUWu/uELgA04lAiVw, pmeerw-jW+XmwGofnusTnJN9+BGXg, marex-ynQEQJNshbs, linux-iio-u79uwXL29TY76Z2rM5mHXA, harald-95f8Dae0BrPYtjvyW6yDsg, stefan.wahren-eS4NqCHxEME, fabio.estevam-KZfg59tc24xl57MIdRCFDg, Ksenija Stanojevic Add 4-wire/5-wire touchscreen controller. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- Changes in v10: - none Changes in v9: - none Changes in v8: - rebase onto 4.9-rc1 Changes in v7: - remove touch_ret variable in probe and use ret instead - make error check on of_property_read_u32 in probe Changes in v6: - update copyright Changes in v5: - add field void __iomem *base to struct mxs_lradc_adc - change arguments in all functions for accessing I/O memory to follow the previous change. - use devm_ioremap for mapping I/O memory Changes in v4: - update copyright - use platform_get_irq_byname - use irq_of_parse_and_map Changes in v3: - make buffer large enough for timestamps - remove unnecessary blank lines Changes in v2: - improve commit message - do not change spacing in Kconfig - impove formating - remove wrapper show_scale_avail - use correct syntax for comments - use devm_iio_trigger_alloc - do not allocate buffer dynamically - use iio_device_claim_*_mode helpers - add spinlock in struct mxs_lradc_ts to enable locking in interrupt handler - only grab irqs that are relevant to adc - remove blank line at the end of the file - change licence to GPL - add copyright drivers/input/touchscreen/Kconfig | 10 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/mxs-lradc-ts.c | 743 +++++++++++++++++++++++++++++++ 3 files changed, 754 insertions(+) create mode 100644 drivers/input/touchscreen/mxs-lradc-ts.c diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index efca013..8ff915e 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -841,6 +841,16 @@ config TOUCHSCREEN_USB_COMPOSITE To compile this driver as a module, choose M here: the module will be called usbtouchscreen. +config TOUCHSCREEN_MXS_LRADC + tristate "Freescale i.MX23/i.MX28 LRADC touchscreen" + depends on MFD_MXS_LRADC + help + Say Y here if you have a touchscreen connected to the low-resolution + analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor. + + To compile this driver as a module, choose M here: the module will be + called mxs-lradc-ts. + config TOUCHSCREEN_MX25 tristate "Freescale i.MX25 touchscreen input driver" depends on MFD_MX25_TSADC diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 81b8645..97e1bb7 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o +obj-$(CONFIG_TOUCHSCREEN_MXS_LRADC) += mxs-lradc-ts.o obj-$(CONFIG_TOUCHSCREEN_MX25) += fsl-imx25-tcq.o obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o diff --git a/drivers/input/touchscreen/mxs-lradc-ts.c b/drivers/input/touchscreen/mxs-lradc-ts.c new file mode 100644 index 0000000..a59102b --- /dev/null +++ b/drivers/input/touchscreen/mxs-lradc-ts.c @@ -0,0 +1,743 @@ +/* + * Freescale MXS LRADC touchscreen driver + * + * Copyright (c) 2012 DENX Software Engineering, GmbH. + * Copyright (c) 2016 Ksenija Stanojevic <ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * + * Authors: + * Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> + * Ksenija Stanojevic <ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/mfd/core.h> +#include <linux/mfd/mxs-lradc.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> + +const char *mxs_lradc_ts_irq_names[] = { + "mxs-lradc-touchscreen", + "mxs-lradc-channel6", + "mxs-lradc-channel7", +}; + +/* + * Touchscreen handling + */ +enum mxs_lradc_ts_plate { + LRADC_TOUCH = 0, + LRADC_SAMPLE_X, + LRADC_SAMPLE_Y, + LRADC_SAMPLE_PRESSURE, + LRADC_SAMPLE_VALID, +}; + +struct mxs_lradc_ts { + struct mxs_lradc *lradc; + struct device *dev; + + void __iomem *base; + /* + * When the touchscreen is enabled, we give it two private virtual + * channels: #6 and #7. This means that only 6 virtual channels (instead + * of 8) will be available for buffered capture. + */ +#define TOUCHSCREEN_VCHANNEL1 7 +#define TOUCHSCREEN_VCHANNEL2 6 + + struct input_dev *ts_input; + + enum mxs_lradc_ts_plate cur_plate; /* state machine */ + bool ts_valid; + unsigned int ts_x_pos; + unsigned int ts_y_pos; + unsigned int ts_pressure; + + /* handle touchscreen's physical behaviour */ + /* samples per coordinate */ + unsigned int over_sample_cnt; + /* time clocks between samples */ + unsigned int over_sample_delay; + /* time in clocks to wait after the plates where switched */ + unsigned int settling_delay; + spinlock_t lock; +}; + +static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_PLATE_MASK; + return LRADC_CTRL0_MX28_PLATE_MASK; +} + +static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE; + return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE; +} + +static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM; + return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW; +} + +static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM; + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW; +} + +static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc) +{ + if (lradc->soc == IMX23_LRADC) + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM; + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW; +} + +static bool mxs_lradc_check_touch_event(struct mxs_lradc_ts *ts) +{ + return !!(readl(ts->base + LRADC_STATUS) & + LRADC_STATUS_TOUCH_DETECT_RAW); +} + +static void mxs_lradc_map_ts_channel(struct mxs_lradc_ts *ts, unsigned int vch, + unsigned int ch) +{ + mxs_lradc_reg_clear(ts->base, LRADC_CTRL4_LRADCSELECT_MASK(vch), + LRADC_CTRL4); + mxs_lradc_reg_set(ts->base, LRADC_CTRL4_LRADCSELECT(vch, ch), + LRADC_CTRL4); +} + +static void mxs_lradc_setup_ts_channel(struct mxs_lradc_ts *ts, unsigned int ch) +{ + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + mxs_lradc_reg_wrt(ts->base, LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(ts->over_sample_cnt - 1), + LRADC_CH(ch)); + + /* from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(ts->base, LRADC_CH_VALUE_MASK, LRADC_CH(ch)); + + /* + * prepare the delay/loop unit according to the oversampling count + * + * from the datasheet: + * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1, + * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise, + * the LRADC will not trigger the delay group." + */ + mxs_lradc_reg_wrt(ts->base, LRADC_DELAY_TRIGGER(1 << ch) | + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(ts->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(ts->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(ts->base, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1); + + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt(ts->base, + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(ts->settling_delay), + LRADC_DELAY(2)); +} + +/* + * Pressure detection is special: + * We want to do both required measurements for the pressure detection in + * one turn. Use the hardware features to chain both conversions and let the + * hardware report one interrupt if both conversions are done + */ +static void mxs_lradc_setup_ts_pressure(struct mxs_lradc_ts *ts, + unsigned int ch1, unsigned int ch2) +{ + u32 reg; + + /* + * prepare for oversampling conversion + * + * from the datasheet: + * "The ACCUMULATE bit in the appropriate channel register + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0; + * otherwise, the IRQs will not fire." + */ + reg = LRADC_CH_ACCUMULATE | + LRADC_CH_NUM_SAMPLES(ts->over_sample_cnt - 1); + mxs_lradc_reg_wrt(ts->base, reg, LRADC_CH(ch1)); + mxs_lradc_reg_wrt(ts->base, reg, LRADC_CH(ch2)); + + /* from the datasheet: + * "Software must clear this register in preparation for a + * multi-cycle accumulation. + */ + mxs_lradc_reg_clear(ts->base, LRADC_CH_VALUE_MASK, LRADC_CH(ch1)); + mxs_lradc_reg_clear(ts->base, LRADC_CH_VALUE_MASK, LRADC_CH(ch2)); + + /* prepare the delay/loop unit according to the oversampling count */ + mxs_lradc_reg_wrt(ts->base, + LRADC_DELAY_TRIGGER(1 << ch1) | + LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */ + LRADC_DELAY_TRIGGER_DELAYS(0) | + LRADC_DELAY_LOOP(ts->over_sample_cnt - 1) | + LRADC_DELAY_DELAY(ts->over_sample_delay - 1), + LRADC_DELAY(3)); + + mxs_lradc_reg_clear(ts->base, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1); + + /* + * after changing the touchscreen plates setting + * the signals need some initial time to settle. Start the + * SoC's delay unit and start the conversion later + * and automatically. + */ + mxs_lradc_reg_wrt(ts->base, + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */ + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */ + LRADC_DELAY_KICK | + LRADC_DELAY_DELAY(ts->settling_delay), LRADC_DELAY(2)); +} + +static unsigned int mxs_lradc_ts_read_raw_channel(struct mxs_lradc_ts *ts, + unsigned int channel) +{ + u32 reg; + unsigned int num_samples, val; + + reg = readl(ts->base + LRADC_CH(channel)); + if (reg & LRADC_CH_ACCUMULATE) + num_samples = ts->over_sample_cnt; + else + num_samples = 1; + + val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET; + return val / num_samples; +} + +static unsigned int mxs_lradc_read_ts_pressure(struct mxs_lradc_ts *ts, + unsigned int ch1, unsigned int ch2) +{ + u32 reg, mask; + unsigned int pressure, m1, m2; + + mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2); + reg = readl(ts->base + LRADC_CTRL1) & mask; + + while (reg != mask) { + reg = readl(ts->base + LRADC_CTRL1) & mask; + dev_dbg(ts->dev, "One channel is still busy: %X\n", reg); + } + + m1 = mxs_lradc_ts_read_raw_channel(ts, ch1); + m2 = mxs_lradc_ts_read_raw_channel(ts, ch2); + + if (m2 == 0) { + dev_warn(ts->dev, "Cannot calculate pressure\n"); + return 1 << (LRADC_RESOLUTION - 1); + } + + /* simply scale the value from 0 ... max ADC resolution */ + pressure = m1; + pressure *= (1 << LRADC_RESOLUTION); + pressure /= m2; + + dev_dbg(ts->dev, "Pressure = %u\n", pressure); + return pressure; +} + +#define TS_CH_XP 2 +#define TS_CH_YP 3 +#define TS_CH_XM 4 +#define TS_CH_YM 5 + +/* + * YP(open)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(weak+) XM(open) + * + * "weak+" means 200k Ohm VDDIO + * (-) means GND + */ +static void mxs_lradc_setup_touch_detection(struct mxs_lradc_ts *ts) +{ + struct mxs_lradc *lradc = ts->lradc; + + /* + * In order to detect a touch event the 'touch detect enable' bit + * enables: + * - a weak pullup to the X+ connector + * - a strong ground at the Y- connector + */ + mxs_lradc_reg_clear(ts->base, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(ts->base, mxs_lradc_touch_detect_bit(lradc), + LRADC_CTRL0); +} + +/* + * YP(meas)--+-------------+ + * | |--+ + * | | | + * YM(open)--+-------------+ | + * +--------------+ + * | | + * XP(+) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_x_pos(struct mxs_lradc_ts *ts) +{ + struct mxs_lradc *lradc = ts->lradc; + + mxs_lradc_reg_clear(ts->base, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(ts->base, mxs_lradc_drive_x_plate(lradc), + LRADC_CTRL0); + + ts->cur_plate = LRADC_SAMPLE_X; + mxs_lradc_map_ts_channel(ts, TOUCHSCREEN_VCHANNEL1, TS_CH_YP); + mxs_lradc_setup_ts_channel(ts, TOUCHSCREEN_VCHANNEL1); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(-)--+-------------+ | + * +--------------+ + * | | + * XP(open) XM(meas) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_y_pos(struct mxs_lradc_ts *ts) +{ + struct mxs_lradc *lradc = ts->lradc; + + mxs_lradc_reg_clear(ts->base, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(ts->base, mxs_lradc_drive_y_plate(lradc), + LRADC_CTRL0); + + ts->cur_plate = LRADC_SAMPLE_Y; + mxs_lradc_map_ts_channel(ts, TOUCHSCREEN_VCHANNEL1, TS_CH_XM); + mxs_lradc_setup_ts_channel(ts, TOUCHSCREEN_VCHANNEL1); +} + +/* + * YP(+)--+-------------+ + * | |--+ + * | | | + * YM(meas)--+-------------+ | + * +--------------+ + * | | + * XP(meas) XM(-) + * + * (+) means here 1.85 V + * (-) means here GND + */ +static void mxs_lradc_prepare_pressure(struct mxs_lradc_ts *ts) +{ + struct mxs_lradc *lradc = ts->lradc; + + mxs_lradc_reg_clear(ts->base, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + mxs_lradc_reg_set(ts->base, mxs_lradc_drive_pressure(lradc), + LRADC_CTRL0); + + ts->cur_plate = LRADC_SAMPLE_PRESSURE; + mxs_lradc_map_ts_channel(ts, TOUCHSCREEN_VCHANNEL1, TS_CH_YM); + mxs_lradc_map_ts_channel(ts, TOUCHSCREEN_VCHANNEL2, TS_CH_XP); + mxs_lradc_setup_ts_pressure(ts, TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); +} + +static void mxs_lradc_enable_touch_detection(struct mxs_lradc_ts *ts) +{ + mxs_lradc_setup_touch_detection(ts); + + ts->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_clear(ts->base, LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1); + mxs_lradc_reg_set(ts->base, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, + LRADC_CTRL1); +} + +static void mxs_lradc_start_touch_event(struct mxs_lradc_ts *ts) +{ + mxs_lradc_reg_clear(ts->base, + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, + LRADC_CTRL1); + mxs_lradc_reg_set(ts->base, + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1), + LRADC_CTRL1); + /* + * start with the Y-pos, because it uses nearly the same plate + * settings like the touch detection + */ + mxs_lradc_prepare_y_pos(ts); +} + +static void mxs_lradc_report_ts_event(struct mxs_lradc_ts *ts) +{ + input_report_abs(ts->ts_input, ABS_X, ts->ts_x_pos); + input_report_abs(ts->ts_input, ABS_Y, ts->ts_y_pos); + input_report_abs(ts->ts_input, ABS_PRESSURE, ts->ts_pressure); + input_report_key(ts->ts_input, BTN_TOUCH, 1); + input_sync(ts->ts_input); +} + +static void mxs_lradc_complete_touch_event(struct mxs_lradc_ts *ts) +{ + mxs_lradc_setup_touch_detection(ts); + ts->cur_plate = LRADC_SAMPLE_VALID; + /* + * start a dummy conversion to burn time to settle the signals + * note: we are not interested in the conversion's value + */ + mxs_lradc_reg_wrt(ts->base, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1)); + mxs_lradc_reg_clear(ts->base, + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2), + LRADC_CTRL1); + mxs_lradc_reg_wrt(ts->base, + LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) | + LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */ + LRADC_DELAY(2)); +} + +/* + * in order to avoid false measurements, report only samples where + * the surface is still touched after the position measurement + */ +static void mxs_lradc_finish_touch_event(struct mxs_lradc_ts *ts, bool valid) +{ + /* if it is still touched, report the sample */ + if (valid && mxs_lradc_check_touch_event(ts)) { + ts->ts_valid = true; + mxs_lradc_report_ts_event(ts); + } + + /* if it is even still touched, continue with the next measurement */ + if (mxs_lradc_check_touch_event(ts)) { + mxs_lradc_prepare_y_pos(ts); + return; + } + + if (ts->ts_valid) { + /* signal the release */ + ts->ts_valid = false; + input_report_key(ts->ts_input, BTN_TOUCH, 0); + input_sync(ts->ts_input); + } + + /* if it is released, wait for the next touch via IRQ */ + ts->cur_plate = LRADC_TOUCH; + mxs_lradc_reg_wrt(ts->base, 0, LRADC_DELAY(2)); + mxs_lradc_reg_wrt(ts->base, 0, LRADC_DELAY(3)); + mxs_lradc_reg_clear(ts->base, + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1), + LRADC_CTRL1); + mxs_lradc_reg_set(ts->base, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, + LRADC_CTRL1); +} + +/* touchscreen's state machine */ +static void mxs_lradc_handle_touch(struct mxs_lradc_ts *ts) +{ + switch (ts->cur_plate) { + case LRADC_TOUCH: + if (mxs_lradc_check_touch_event(ts)) + mxs_lradc_start_touch_event(ts); + mxs_lradc_reg_clear(ts->base, LRADC_CTRL1_TOUCH_DETECT_IRQ, + LRADC_CTRL1); + return; + + case LRADC_SAMPLE_Y: + ts->ts_y_pos = + mxs_lradc_ts_read_raw_channel(ts, TOUCHSCREEN_VCHANNEL1); + mxs_lradc_prepare_x_pos(ts); + return; + + case LRADC_SAMPLE_X: + ts->ts_x_pos = + mxs_lradc_ts_read_raw_channel(ts, TOUCHSCREEN_VCHANNEL1); + mxs_lradc_prepare_pressure(ts); + return; + + case LRADC_SAMPLE_PRESSURE: + ts->ts_pressure = + mxs_lradc_read_ts_pressure(ts, + TOUCHSCREEN_VCHANNEL2, + TOUCHSCREEN_VCHANNEL1); + mxs_lradc_complete_touch_event(ts); + return; + + case LRADC_SAMPLE_VALID: + mxs_lradc_finish_touch_event(ts, 1); + break; + } +} + +/* IRQ Handling */ +static irqreturn_t mxs_lradc_ts_handle_irq(int irq, void *data) +{ + struct mxs_lradc_ts *ts = data; + struct mxs_lradc *lradc = ts->lradc; + unsigned long reg = readl(ts->base + LRADC_CTRL1); + u32 clr_irq = mxs_lradc_irq_mask(lradc); + const u32 ts_irq_mask = + LRADC_CTRL1_TOUCH_DETECT_IRQ | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2); + unsigned long flags; + + if (!(reg & mxs_lradc_irq_mask(lradc))) + return IRQ_NONE; + + if (reg & ts_irq_mask) { + spin_lock_irqsave(&ts->lock, flags); + mxs_lradc_handle_touch(ts); + spin_unlock_irqrestore(&ts->lock, flags); + /* Make sure we don't clear the next conversion's interrupt. */ + clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2)); + mxs_lradc_reg_clear(ts->base, reg & clr_irq, LRADC_CTRL1); + } + + return IRQ_HANDLED; +} + +static int mxs_lradc_ts_open(struct input_dev *dev) +{ + struct mxs_lradc_ts *ts = input_get_drvdata(dev); + + /* Enable the touch-detect circuitry. */ + mxs_lradc_enable_touch_detection(ts); + + return 0; +} + +static void mxs_lradc_ts_stop(struct mxs_lradc_ts *ts) +{ + int i; + struct mxs_lradc *lradc = ts->lradc; + + /* stop all interrupts from firing */ + mxs_lradc_reg_clear(ts->base, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) | + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1); + + /* Power-down touchscreen touch-detect circuitry. */ + mxs_lradc_reg_clear(ts->base, mxs_lradc_plate_mask(lradc), LRADC_CTRL0); + + mxs_lradc_reg_clear(ts->base, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); + + for (i = 1; i < LRADC_MAX_DELAY_CHANS; i++) + mxs_lradc_reg_wrt(ts->base, 0, LRADC_DELAY(i)); +} + +static void mxs_lradc_ts_close(struct input_dev *dev) +{ + struct mxs_lradc_ts *ts = input_get_drvdata(dev); + + mxs_lradc_ts_stop(ts); +} + +static void mxs_lradc_ts_hw_init(struct mxs_lradc_ts *ts) +{ + struct mxs_lradc *lradc = ts->lradc; + + /* Configure the touchscreen type */ + if (lradc->soc == IMX28_LRADC) { + mxs_lradc_reg_clear(ts->base, + LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + + if (lradc->touchscreen_wire == MXS_LRADC_TOUCHSCREEN_5WIRE) + mxs_lradc_reg_set(ts->base, + LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE, + LRADC_CTRL0); + } +} + +static int mxs_lradc_ts_register(struct mxs_lradc_ts *ts) +{ + struct input_dev *input = ts->ts_input; + struct device *dev = ts->dev; + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + input->name = "mxs-lradc-ts"; + input->id.bustype = BUS_HOST; + input->open = mxs_lradc_ts_open; + input->close = mxs_lradc_ts_close; + + __set_bit(EV_ABS, input->evbit); + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(INPUT_PROP_DIRECT, input->propbit); + input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); + input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK, + 0, 0); + + ts->ts_input = input; + input_set_drvdata(input, ts); + + return input_register_device(input); +} + +static int mxs_lradc_ts_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->parent->of_node; + struct mxs_lradc *lradc = dev_get_platdata(dev); + struct mxs_lradc_ts *ts; + struct resource *iores; + int ret, irq, virq, i; + u32 ts_wires = 0, adapt; + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + platform_set_drvdata(pdev, ts); + + ts->lradc = lradc; + ts->dev = dev; + spin_lock_init(&ts->lock); + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ts->base = devm_ioremap(dev, iores->start, resource_size(iores)); + if (IS_ERR(ts->base)) + return PTR_ERR(ts->base); + + ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires", + &ts_wires); + if (ret) + return ret; + + if (of_property_read_u32(node, "fsl,ave-ctrl", &adapt)) { + ts->over_sample_cnt = 4; + } else { + if (adapt >= 1 || adapt <= 32) { + ts->over_sample_cnt = adapt; + } else { + dev_err(ts->dev, "Invalid sample count (%u)\n", + adapt); + return -EINVAL; + } + } + + if (of_property_read_u32(node, "fsl,ave-delay", &adapt)) { + ts->over_sample_delay = 2; + } else { + if (adapt >= 2 || adapt <= LRADC_DELAY_DELAY_MASK + 1) { + ts->over_sample_delay = adapt; + } else { + dev_err(ts->dev, "Invalid sample delay (%u)\n", + adapt); + return -EINVAL; + } + } + + if (of_property_read_u32(node, "fsl,settling", &adapt)) { + ts->settling_delay = 10; + } else { + if (adapt >= 1 || adapt <= LRADC_DELAY_DELAY_MASK) { + ts->settling_delay = adapt; + } else { + dev_err(ts->dev, "Invalid settling delay (%u)\n", + adapt); + return -EINVAL; + } + } + + ret = stmp_reset_block(ts->base); + if (ret) + return ret; + + mxs_lradc_ts_hw_init(ts); + + for (i = 0; i < 3; i++) { + irq = platform_get_irq_byname(pdev, mxs_lradc_ts_irq_names[i]); + if (irq < 0) + return irq; + + virq = irq_of_parse_and_map(node, irq); + + ret = devm_request_irq(dev, virq, + mxs_lradc_ts_handle_irq, + 0, mxs_lradc_ts_irq_names[i], ts); + if (ret) + return ret; + } + + ret = mxs_lradc_ts_register(ts); + if (!ret) + goto error; + + return 0; + +error: + mxs_lradc_ts_stop(ts); + + return ret; +} + +static struct platform_driver mxs_lradc_ts_driver = { + .driver = { + .name = "mxs-lradc-ts", + }, + .probe = mxs_lradc_ts_probe, +}; +module_platform_driver(mxs_lradc_ts_driver); + +MODULE_AUTHOR("Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>"); +MODULE_DESCRIPTION("Freescale MXS LRADC touchscreen driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-lradc-ts"); -- 1.9.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v10 5/5] mfd: Move binding document [not found] ` <cover.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2016-11-20 10:57 ` [PATCH v10 2/5] iio: adc: mxs-lradc: Add support for adc driver Ksenija Stanojevic 2016-11-20 10:57 ` [PATCH v10 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen Ksenija Stanojevic @ 2016-11-20 10:57 ` Ksenija Stanojevic [not found] ` <ed11371e67fb76fc6c6f347ec779e620412a339f.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2 siblings, 1 reply; 8+ messages in thread From: Ksenija Stanojevic @ 2016-11-20 10:57 UTC (permalink / raw) To: linux-kernel-u79uwXL29TY76Z2rM5mHXA Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A, dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w, linux-input-u79uwXL29TY76Z2rM5mHXA, jic23-DgEjT+Ai2ygdnm+yROfE0A, knaack.h-Mmb7MZpHnFY, lars-Qo5EllUWu/uELgA04lAiVw, pmeerw-jW+XmwGofnusTnJN9+BGXg, marex-ynQEQJNshbs, linux-iio-u79uwXL29TY76Z2rM5mHXA, harald-95f8Dae0BrPYtjvyW6yDsg, stefan.wahren-eS4NqCHxEME, fabio.estevam-KZfg59tc24xl57MIdRCFDg, Ksenija Stanojevic The bindings, which are now used in MFD, need also to be documented in the MFD binding document. Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> --- Changes in v10: - none Changes in v9: - format patch using -M option Changes in v8: - rebase onto 4.9-rc1 Changes in v7: - add to the patchset Documentation/devicetree/bindings/{iio/adc => mfd}/mxs-lradc.txt | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename Documentation/devicetree/bindings/{iio/adc => mfd}/mxs-lradc.txt (100%) diff --git a/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt similarity index 100% rename from Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt rename to Documentation/devicetree/bindings/mfd/mxs-lradc.txt -- 1.9.1 ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <ed11371e67fb76fc6c6f347ec779e620412a339f.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH v10 5/5] mfd: Move binding document [not found] ` <ed11371e67fb76fc6c6f347ec779e620412a339f.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2016-11-21 10:50 ` Lee Jones 0 siblings, 0 replies; 8+ messages in thread From: Lee Jones @ 2016-11-21 10:50 UTC (permalink / raw) To: Ksenija Stanojevic Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w, linux-input-u79uwXL29TY76Z2rM5mHXA, jic23-DgEjT+Ai2ygdnm+yROfE0A, knaack.h-Mmb7MZpHnFY, lars-Qo5EllUWu/uELgA04lAiVw, pmeerw-jW+XmwGofnusTnJN9+BGXg, marex-ynQEQJNshbs, linux-iio-u79uwXL29TY76Z2rM5mHXA, harald-95f8Dae0BrPYtjvyW6yDsg, stefan.wahren-eS4NqCHxEME, fabio.estevam-KZfg59tc24xl57MIdRCFDg On Sun, 20 Nov 2016, Ksenija Stanojevic wrote: > The bindings, which are now used in MFD, need also to be > documented in the MFD binding document. > > Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > --- > Changes in v10: > - none > > Changes in v9: > - format patch using -M option > > Changes in v8: > - rebase onto 4.9-rc1 > > Changes in v7: > - add to the patchset > > Documentation/devicetree/bindings/{iio/adc => mfd}/mxs-lradc.txt | 0 > 1 file changed, 0 insertions(+), 0 deletions(-) > rename Documentation/devicetree/bindings/{iio/adc => mfd}/mxs-lradc.txt (100%) For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > diff --git a/Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt > similarity index 100% > rename from Documentation/devicetree/bindings/iio/adc/mxs-lradc.txt > rename to Documentation/devicetree/bindings/mfd/mxs-lradc.txt -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-11-21 10:50 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-20 10:57 [PATCH v10 0/5] mxs-lradc: Split driver into MFD Ksenija Stanojevic
2016-11-20 10:57 ` [PATCH v10 1/5] mfd: mxs-lradc: Add support for mxs-lradc MFD Ksenija Stanojevic
2016-11-21 10:49 ` Lee Jones
2016-11-20 10:57 ` [PATCH v10 4/5] iio: adc: mxs-lradc: Remove driver Ksenija Stanojevic
[not found] ` <cover.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-20 10:57 ` [PATCH v10 2/5] iio: adc: mxs-lradc: Add support for adc driver Ksenija Stanojevic
2016-11-20 10:57 ` [PATCH v10 3/5] input: touchscreen: mxs-lradc: Add support for touchscreen Ksenija Stanojevic
2016-11-20 10:57 ` [PATCH v10 5/5] mfd: Move binding document Ksenija Stanojevic
[not found] ` <ed11371e67fb76fc6c6f347ec779e620412a339f.1479638191.git.ksenija.stanojevic-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2016-11-21 10:50 ` Lee Jones
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).