From: Hans de Goede <hdegoede@redhat.com>
To: Bastien Nocera <hadess@hadess.net>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, Dmitry Mastykin <mastichi@gmail.com>
Subject: Re: [PATCH resend 10/10] Input: goodix - Restore config on resume if necessary
Date: Mon, 2 Mar 2020 20:08:55 +0100 [thread overview]
Message-ID: <f4a2ea92-8733-3b3c-fe18-ec54d617336b@redhat.com> (raw)
In-Reply-To: <30842bb43aa29e8f1edeadc335e3f792a7a76092.camel@hadess.net>
Hi,
On 3/2/20 12:35 PM, Bastien Nocera wrote:
> On Fri, 2020-02-21 at 17:47 +0100, Hans de Goede wrote:
>> Some devices, e.g the Trekstor Primetab S11B, loose there config over
>
> "lose".
>
>> a suspend/resume cycle (likely the controller looses power during
>
> "loses".
>
>> suspend).
>>
>> This commit reads back the config version on resume and if matches
>> the
>> expected config version it resets the controller and resends the
>> config
>> we read back and saved at probe time.
>>
>> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786317
>> BugLink: https://github.com/nexus511/gpd-ubuntu-packages/issues/10
>> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199207
>> Cc: Dmitry Mastykin <mastichi@gmail.com>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>
> Looks fine apart from the nitpicks.
>
> Reviewed-by: Bastien Nocera <hadess@hadess.net>
>
>> ---
>> drivers/input/touchscreen/goodix.c | 22 ++++++++++++++++++++++
>> 1 file changed, 22 insertions(+)
>>
>> diff --git a/drivers/input/touchscreen/goodix.c
>> b/drivers/input/touchscreen/goodix.c
>> index 0f39c499e3a9..389d3e044f97 100644
>> --- a/drivers/input/touchscreen/goodix.c
>> +++ b/drivers/input/touchscreen/goodix.c
>> @@ -1232,6 +1232,7 @@ static int __maybe_unused goodix_resume(struct
>> device *dev)
>> {
>> struct i2c_client *client = to_i2c_client(dev);
>> struct goodix_ts_data *ts = i2c_get_clientdata(client);
>> + u8 config_ver;
>> int error;
>>
>> if (ts->irq_pin_access_method == irq_pin_access_none) {
>> @@ -1253,6 +1254,27 @@ static int __maybe_unused goodix_resume(struct
>> device *dev)
>> if (error)
>> return error;
>>
>> + error = goodix_i2c_read(ts->client, ts->chip->config_addr,
>> + &config_ver, 1);
>> + if (error)
>> + dev_warn(dev, "Error reading config version: %d,
>> resetting controller\n",
>> + error);
>> + else if (config_ver != ts->config[0])
>> + dev_warn(dev, "Config version mismatch %d != %d,
>> resetting controller\n",
>> + config_ver, ts->config[0]);
>
> Should it really be a warning if it happens regularly?
Good point, I've changed this to a dev_info for v2.
Regards,
Hans
>
>> +
>> + if (error != 0 || config_ver != ts->config[0]) {
>> + error = goodix_reset(ts);
>> + if (error) {
>> + dev_err(dev, "Controller reset failed.\n");
>> + return error;
>> + }
>> +
>> + error = goodix_send_cfg(ts, ts->config, ts->chip-
>>> config_len);
>> + if (error)
>> + return error;
>> + }
>> +
>> error = goodix_request_irq(ts);
>> if (error)
>> return error;
>
next prev parent reply other threads:[~2020-03-02 19:09 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-21 16:47 [PATCH resend 01/10] Input: goodix - Refactor IRQ pin GPIO accesses Hans de Goede
2020-02-21 16:47 ` [PATCH resend 02/10] Input: goodix - Make loading the config from disk independent from the GPIO setup Hans de Goede
2020-03-02 11:12 ` Bastien Nocera
2020-02-21 16:47 ` [PATCH resend 03/10] Input: goodix - Make resetting the controller at probe " Hans de Goede
2020-03-02 11:14 ` Bastien Nocera
2020-02-21 16:47 ` [PATCH resend 04/10] Input: goodix - Add support for getting IRQ + reset GPIOs on Cherry Trail devices Hans de Goede
2020-03-02 11:23 ` Bastien Nocera
2020-03-02 15:40 ` Hans de Goede
2020-03-02 15:44 ` Bastien Nocera
2020-03-02 16:23 ` Hans de Goede
2020-02-21 16:47 ` [PATCH resend 05/10] Input: goodix - Add support for getting IRQ + reset GPIOs on Bay " Hans de Goede
2020-03-02 11:24 ` Bastien Nocera
2020-02-21 16:47 ` [PATCH resend 06/10] Input: goodix - Add support for controlling the IRQ pin through ACPI methods Hans de Goede
2020-03-02 11:25 ` Bastien Nocera
2020-02-21 16:47 ` [PATCH resend 07/10] Input: goodix - Move defines to above struct goodix_ts_data declaration Hans de Goede
2020-03-02 11:25 ` Bastien Nocera
2020-02-21 16:47 ` [PATCH resend 08/10] Input: goodix - Save a copy of the config from goodix_read_config() Hans de Goede
2020-03-02 11:30 ` Bastien Nocera
2020-03-02 18:36 ` Hans de Goede
2020-02-21 16:47 ` [PATCH resend 09/10] Input: goodix - Make goodix_send_cfg() take a raw buffer as argument Hans de Goede
2020-03-02 11:33 ` Bastien Nocera
2020-03-02 18:53 ` Hans de Goede
2020-02-21 16:47 ` [PATCH resend 10/10] Input: goodix - Restore config on resume if necessary Hans de Goede
2020-03-02 11:35 ` Bastien Nocera
2020-03-02 19:08 ` Hans de Goede [this message]
2020-03-02 11:09 ` [PATCH resend 01/10] Input: goodix - Refactor IRQ pin GPIO accesses Bastien Nocera
2020-03-02 13:23 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f4a2ea92-8733-3b3c-fe18-ec54d617336b@redhat.com \
--to=hdegoede@redhat.com \
--cc=dmitry.torokhov@gmail.com \
--cc=hadess@hadess.net \
--cc=linux-input@vger.kernel.org \
--cc=mastichi@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).