[PATCH v6 0/3] adp5588-keys: Support for dedicated gpio operation

[PATCH v6 0/3] adp5588-keys: Support for dedicated gpio operation

[Utsav Agarwal via B4 Relay]

Current state of the driver for the ADP5588/87 only allows partial
I/O to be used as GPIO. This support was previously present as a
separate gpio driver, which was dropped with the commit
5ddc896088b0 ("gpio: gpio-adp5588: drop the driver") since the
functionality was deemed to have been merged with adp5588-keys.

This series of patches re-enables this support by allowing the driver to 
relax the requirement for registering a keymap and enable pure GPIO 
operation. 

Changelog
==========

V2: 
	-  Changed gpio_only from a local variable to a member of struct
	adp5588_kpad
	-  Removed condition from adp5588_probe() to skip adp5588_fw_parse() if 
	gpio-only specified. adp558_fw_parse() now handles and returns
	0 if gpio-only has been specified.
	-  Added a check in adp5588_fw_parse() to make sure keypad 
	properties(keypad,num-columns and keypad,num-rows) were not defined when 
	gpio-only specified

V3:
	-  Moved device_property_present() for reading "gpio-only" into 
	adp558_fw_parse()
	-  Added print statements in case of error

V4:
	- Added dt-bindings patch

Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
---
V5:
	- Removed extra property "gpio-only", now pure gpio mode is
	  detected via the adbsence of keypad specific properties.
	- Added dependencies for keypad properties to preserve
	  the original requirements in case a pure gpio mode is not
	  being used.
	- Added additional description for why the "interrupts" property
	  was made optional
	- Rebased current work based on https://lore.kernel.org/linux-input/ZoLt_qBCQS-tG8Ar@google.com/
- Link to v4: https://lore.kernel.org/r/20240701-adp5588_gpio_support-v4-0-44bba0445e90@analog.com

---
Changes in v6:
	- Restored functionality to register interrupts in GPIO
	  mode(i.e, these are optional but not exclusive to keypad mode
	  since even in pure gpio mode, they can be used as inputs via 
	  gpio-keys)
	- Updated dt-bindings such that each keypad property depends on
	  the others. Interrupts, although optional are now required by 
	  keypad mode but are not limited to it.
- Link to v5: https://lore.kernel.org/r/20240703-adp5588_gpio_support-v5-0-49fcead0d390@analog.com

---
Dmitry Torokhov (1):
      iInput: adp5588-keys - use guard notation when acquiring mutexes

Utsav Agarwal (2):
      Input: adp5588-keys - add support for pure gpio
      dt-bindings: input: Update dtbinding for adp5588

 .../devicetree/bindings/input/adi,adp5588.yaml     | 46 +++++++++++--
 drivers/input/keyboard/adp5588-keys.c              | 76 +++++++++++++---------
 2 files changed, 85 insertions(+), 37 deletions(-)
---
base-commit: 1c52cf5e79d30ac996f34b64284f2c317004d641
change-id: 20240701-adp5588_gpio_support-65db2bd21a9f

Best regards,
-- 
Utsav Agarwal <utsav.agarwal@analog.com>

[PATCH v6 1/3] iInput: adp5588-keys - use guard notation when acquiring mutexes

[Utsav Agarwal via B4 Relay]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This makes the code more compact and error handling more robust.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
---
 drivers/input/keyboard/adp5588-keys.c | 49 ++++++++++++-----------------------
 1 file changed, 17 insertions(+), 32 deletions(-)

diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 1b0279393df4..09bcfc6b9408 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -221,15 +221,13 @@ static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned int off)
 	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 	int val;
 
-	mutex_lock(&kpad->gpio_lock);
+	guard(mutex)(&kpad->gpio_lock);
 
 	if (kpad->dir[bank] & bit)
 		val = kpad->dat_out[bank];
 	else
 		val = adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank);
 
-	mutex_unlock(&kpad->gpio_lock);
-
 	return !!(val & bit);
 }
 
@@ -240,7 +238,7 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
 	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
 	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 
-	mutex_lock(&kpad->gpio_lock);
+	guard(mutex)(&kpad->gpio_lock);
 
 	if (val)
 		kpad->dat_out[bank] |= bit;
@@ -248,8 +246,6 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
 		kpad->dat_out[bank] &= ~bit;
 
 	adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank, kpad->dat_out[bank]);
-
-	mutex_unlock(&kpad->gpio_lock);
 }
 
 static int adp5588_gpio_set_config(struct gpio_chip *chip,  unsigned int off,
@@ -259,7 +255,6 @@ static int adp5588_gpio_set_config(struct gpio_chip *chip,  unsigned int off,
 	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
 	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 	bool pull_disable;
-	int ret;
 
 	switch (pinconf_to_config_param(config)) {
 	case PIN_CONFIG_BIAS_PULL_UP:
@@ -272,19 +267,15 @@ static int adp5588_gpio_set_config(struct gpio_chip *chip,  unsigned int off,
 		return -ENOTSUPP;
 	}
 
-	mutex_lock(&kpad->gpio_lock);
+	guard(mutex)(&kpad->gpio_lock);
 
 	if (pull_disable)
 		kpad->pull_dis[bank] |= bit;
 	else
 		kpad->pull_dis[bank] &= bit;
 
-	ret = adp5588_write(kpad->client, GPIO_PULL1 + bank,
-			    kpad->pull_dis[bank]);
-
-	mutex_unlock(&kpad->gpio_lock);
-
-	return ret;
+	return adp5588_write(kpad->client, GPIO_PULL1 + bank,
+			     kpad->pull_dis[bank]);
 }
 
 static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned int off)
@@ -292,16 +283,11 @@ static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned int off
 	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
 	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
 	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
-	int ret;
 
-	mutex_lock(&kpad->gpio_lock);
+	guard(mutex)(&kpad->gpio_lock);
 
 	kpad->dir[bank] &= ~bit;
-	ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
-
-	mutex_unlock(&kpad->gpio_lock);
-
-	return ret;
+	return adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
 }
 
 static int adp5588_gpio_direction_output(struct gpio_chip *chip,
@@ -310,9 +296,9 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
 	struct adp5588_kpad *kpad = gpiochip_get_data(chip);
 	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
 	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
-	int ret;
+	int error;
 
-	mutex_lock(&kpad->gpio_lock);
+	guard(mutex)(&kpad->gpio_lock);
 
 	kpad->dir[bank] |= bit;
 
@@ -321,17 +307,16 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
 	else
 		kpad->dat_out[bank] &= ~bit;
 
-	ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
-			    kpad->dat_out[bank]);
-	if (ret)
-		goto out_unlock;
-
-	ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
+	error = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+			      kpad->dat_out[bank]);
+	if (error)
+		return error;
 
-out_unlock:
-	mutex_unlock(&kpad->gpio_lock);
+	error = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
+	if (error)
+		return error;
 
-	return ret;
+	return 0;
 }
 
 static int adp5588_build_gpiomap(struct adp5588_kpad *kpad)

-- 
2.34.1

[PATCH v6 2/3] Input: adp5588-keys - add support for pure gpio

[Utsav Agarwal via B4 Relay]

From: Utsav Agarwal <utsav.agarwal@analog.com>

Keypad specific setup is relaxed if no keypad rows/columns are specified,
enabling a purely gpio operation.

Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
---
 drivers/input/keyboard/adp5588-keys.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 09bcfc6b9408..572335c8ef0f 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -188,6 +188,7 @@ struct adp5588_kpad {
 	u32 cols;
 	u32 unlock_keys[2];
 	int nkeys_unlock;
+	bool gpio_only;
 	unsigned short keycode[ADP5588_KEYMAPSIZE];
 	unsigned char gpiomap[ADP5588_MAXGPIO];
 	struct gpio_chip gc;
@@ -632,6 +633,21 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad)
 	struct i2c_client *client = kpad->client;
 	int ret, i;
 
+	/*
+	 * Check if the device is to be operated purely in GPIO mode. To do
+	 * so, check that no keypad rows or columns have been specified,
+	 * since all GPINS should be configured as GPIO.
+	 */
+	ret = device_property_present(&client->dev,
+			"keypad,num-rows");
+	ret |= device_property_present(&client->dev,
+			"keypad,num-columns");
+	/* If purely GPIO, skip keypad setup */
+	if (!ret) {
+		kpad->gpio_only = true;
+		return 0;
+	}
+
 	ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
 					     &kpad->cols);
 	if (ret)
@@ -775,6 +791,11 @@ static int adp5588_probe(struct i2c_client *client)
 	if (error)
 		return error;
 
+	if (kpad->gpio_only && !client->irq) {
+		dev_info(&client->dev, "Rev.%d, started as GPIO only\n", revid);
+		return 0;
+	}
+
 	error = devm_request_threaded_irq(&client->dev, client->irq,
 					  adp5588_hard_irq, adp5588_thread_irq,
 					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
@@ -785,6 +806,12 @@ static int adp5588_probe(struct i2c_client *client)
 		return error;
 	}
 
+	if (kpad->gpio_only) {
+		dev_info(&client->dev, "Rev.%d GPIO only, irq %d\n",
+				revid, client->irq);
+		return 0;
+	}
+
 	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
 	return 0;
 }

-- 
2.34.1

[PATCH v6 3/3] dt-bindings: input: Update dtbinding for adp5588

[Utsav Agarwal via B4 Relay]

From: Utsav Agarwal <utsav.agarwal@analog.com>

Updating dt bindings for adp5588. Since the device can now function in a
purely gpio mode, the following keypad specific properties are now made
optional:
	- interrupts
	- keypad,num-rows
	- keypad,num-columns
	- linux,keymap

However the above properties are required to be specified when
configuring the device as a keypad, dependencies have been added
such that specifying either one would require the remaining as well.

Note that interrupts are optional, but required when the device has been
configured in keypad mode.

Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
---
 .../devicetree/bindings/input/adi,adp5588.yaml     | 46 +++++++++++++++++++---
 1 file changed, 41 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
index 26ea66834ae2..83d1fe19e300 100644
--- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -49,7 +49,10 @@ properties:
   interrupt-controller:
     description:
       This property applies if either keypad,num-rows lower than 8 or
-      keypad,num-columns lower than 10.
+      keypad,num-columns lower than 10. This property is optional if
+      keypad,num-rows or keypad,num-columns are not specified since the
+      device then acts as gpio only, during which interrupts may or may
+      not be utilized.
 
   '#interrupt-cells':
     const: 2
@@ -65,13 +68,28 @@ properties:
     minItems: 1
     maxItems: 2
 
+
+dependencies:
+  keypad,num-rows:
+    - linux,keymap
+    - keypad,num-columns
+  keypad,num-columns:
+    - linux,keymap
+    - keypad,num-rows
+  linux,keymap:
+    - keypad,num-rows
+    - keypad,num-columns
+
+if:
+  required:
+    - linux,keymap
+then:
+  required:
+    - interrupts
+
 required:
   - compatible
   - reg
-  - interrupts
-  - keypad,num-rows
-  - keypad,num-columns
-  - linux,keymap
 
 unevaluatedProperties: false
 
@@ -108,4 +126,22 @@ examples:
             >;
         };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+        gpio@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            #gpio-cells = <2>;
+            gpio-controller;
+            };
+        };
+
 ...

-- 
2.34.1

Re: [PATCH v6 3/3] dt-bindings: input: Update dtbinding for adp5588

[Krzysztof Kozlowski]

On 04/07/2024 12:45, Utsav Agarwal via B4 Relay wrote:
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/input/input.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +        gpio@34 {
> +            compatible = "adi,adp5588";
> +            reg = <0x34>;
> +
> +            #gpio-cells = <2>;
> +            gpio-controller;
> +            };

Fix your indentation. It's total mess above.

Best regards,
Krzysztof

Re: [PATCH v6 2/3] Input: adp5588-keys - add support for pure gpio

[Nuno Sá]

On Thu, 2024-07-04 at 11:45 +0100, Utsav Agarwal via B4 Relay wrote:
> From: Utsav Agarwal <utsav.agarwal@analog.com>
> 
> Keypad specific setup is relaxed if no keypad rows/columns are specified,
> enabling a purely gpio operation.
> 
> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
> ---
>  drivers/input/keyboard/adp5588-keys.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/input/keyboard/adp5588-keys.c
> b/drivers/input/keyboard/adp5588-keys.c
> index 09bcfc6b9408..572335c8ef0f 100644
> --- a/drivers/input/keyboard/adp5588-keys.c
> +++ b/drivers/input/keyboard/adp5588-keys.c
> @@ -188,6 +188,7 @@ struct adp5588_kpad {
>  	u32 cols;
>  	u32 unlock_keys[2];
>  	int nkeys_unlock;
> +	bool gpio_only;
>  	unsigned short keycode[ADP5588_KEYMAPSIZE];
>  	unsigned char gpiomap[ADP5588_MAXGPIO];
>  	struct gpio_chip gc;
> @@ -632,6 +633,21 @@ static int adp5588_fw_parse(struct adp5588_kpad *kpad)
>  	struct i2c_client *client = kpad->client;
>  	int ret, i;
>  
> +	/*
> +	 * Check if the device is to be operated purely in GPIO mode. To do
> +	 * so, check that no keypad rows or columns have been specified,
> +	 * since all GPINS should be configured as GPIO.
> +	 */
> +	ret = device_property_present(&client->dev,
> +			"keypad,num-rows");
> +	ret |= device_property_present(&client->dev,
> +			"keypad,num-columns");
> +	/* If purely GPIO, skip keypad setup */
> +	if (!ret) {
> +		kpad->gpio_only = true;
> +		return 0;
> +	}
> +
>  	ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
>  					     &kpad->cols);
>  	if (ret)
> @@ -775,6 +791,11 @@ static int adp5588_probe(struct i2c_client *client)
>  	if (error)
>  		return error;
>  
> +	if (kpad->gpio_only && !client->irq) {
> +		dev_info(&client->dev, "Rev.%d, started as GPIO only\n",
> revid);
> +		return 0;
> +	}

You're still missing something regarding interrupts. If there's no client->irq
then you should not setup the gpio_irq_chip. Hence, in adp5588_gpio_add(), you
should have:

if (kpad->client->irq) {
	girq = &kpad->gc.irq;
	gpio_irq_chip_set_chip(girq, &adp5588_irq_chip);
	girq->handler = handle_bad_irq;
	girq->threaded = true;
}

- Nuno Sá

Re: [PATCH v6 3/3] dt-bindings: input: Update dtbinding for adp5588

[Nuno Sá]

On Thu, 2024-07-04 at 11:45 +0100, Utsav Agarwal via B4 Relay wrote:
> From: Utsav Agarwal <utsav.agarwal@analog.com>
> 
> Updating dt bindings for adp5588. Since the device can now function in a
> purely gpio mode, the following keypad specific properties are now made
> optional:
> 	- interrupts
> 	- keypad,num-rows
> 	- keypad,num-columns
> 	- linux,keymap
> 
> However the above properties are required to be specified when
> configuring the device as a keypad, dependencies have been added
> such that specifying either one would require the remaining as well.
> 
> Note that interrupts are optional, but required when the device has been
> configured in keypad mode.
> 
> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
> ---
>  .../devicetree/bindings/input/adi,adp5588.yaml     | 46 +++++++++++++++++++--
> -
>  1 file changed, 41 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> index 26ea66834ae2..83d1fe19e300 100644
> --- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> +++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> @@ -49,7 +49,10 @@ properties:
>    interrupt-controller:
>      description:
>        This property applies if either keypad,num-rows lower than 8 or
> -      keypad,num-columns lower than 10.
> +      keypad,num-columns lower than 10. This property is optional if
> +      keypad,num-rows or keypad,num-columns are not specified since the
> +      device then acts as gpio only, during which interrupts may or may
> +      not be utilized.
>  
>    '#interrupt-cells':
>      const: 2
> @@ -65,13 +68,28 @@ properties:
>      minItems: 1
>      maxItems: 2
>  
> +
> +dependencies:
> +  keypad,num-rows:
> +    - linux,keymap
> +    - keypad,num-columns
> +  keypad,num-columns:
> +    - linux,keymap
> +    - keypad,num-rows
> +  linux,keymap:
> +    - keypad,num-rows
> +    - keypad,num-columns

The above seems pretty generic. Maybe it could be moved into matrix-keymap.yaml
at some point...

- Nuno Sá

Re: [PATCH v6 1/3] iInput: adp5588-keys - use guard notation when acquiring mutexes

[Nuno Sá]

On Thu, 2024-07-04 at 11:45 +0100, Utsav Agarwal via B4 Relay wrote:
> From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> 
> This makes the code more compact and error handling more robust.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Acked-by: Michael Hennerich <michael.hennerich@analog.com>
> ---

Since you're "transporting" this patch, you should fix the commit subject:
iInput -> input

- Nuno Sá

RE: [PATCH v6 2/3] Input: adp5588-keys - add support for pure gpio

[Agarwal, Utsav]

Hi Nuno,

> -----Original Message-----
> From: Nuno Sá <noname.nuno@gmail.com>
> Sent: Thursday, July 4, 2024 12:10 PM
> To: Agarwal, Utsav <Utsav.Agarwal@analog.com>; Hennerich, Michael
> <Michael.Hennerich@analog.com>; Dmitry Torokhov
> <dmitry.torokhov@gmail.com>; Rob Herring <robh@kernel.org>; Krzysztof
> Kozlowski <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Sa,
> Nuno <Nuno.Sa@analog.com>
> Cc: linux-input@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; Artamonovs, Arturs
> <Arturs.Artamonovs@analog.com>; Bimpikas, Vasileios
> <Vasileios.Bimpikas@analog.com>; Gaskell, Oliver
> <Oliver.Gaskell@analog.com>
> Subject: Re: [PATCH v6 2/3] Input: adp5588-keys - add support for pure gpio
> 
> [External]
> 
> On Thu, 2024-07-04 at 11:45 +0100, Utsav Agarwal via B4 Relay wrote:
> > From: Utsav Agarwal <utsav.agarwal@analog.com>
> >
> > Keypad specific setup is relaxed if no keypad rows/columns are specified,
> > enabling a purely gpio operation.
> >
> > Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
> > ---
> >  drivers/input/keyboard/adp5588-keys.c | 27
> +++++++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> >
> > diff --git a/drivers/input/keyboard/adp5588-keys.c
> > b/drivers/input/keyboard/adp5588-keys.c
> > index 09bcfc6b9408..572335c8ef0f 100644
> > --- a/drivers/input/keyboard/adp5588-keys.c
> > +++ b/drivers/input/keyboard/adp5588-keys.c
> > @@ -188,6 +188,7 @@ struct adp5588_kpad {
> >  	u32 cols;
> >  	u32 unlock_keys[2];
> >  	int nkeys_unlock;
> > +	bool gpio_only;
> >  	unsigned short keycode[ADP5588_KEYMAPSIZE];
> >  	unsigned char gpiomap[ADP5588_MAXGPIO];
> >  	struct gpio_chip gc;
> > @@ -632,6 +633,21 @@ static int adp5588_fw_parse(struct adp5588_kpad
> *kpad)
> >  	struct i2c_client *client = kpad->client;
> >  	int ret, i;
> >
> > +	/*
> > +	 * Check if the device is to be operated purely in GPIO mode. To do
> > +	 * so, check that no keypad rows or columns have been specified,
> > +	 * since all GPINS should be configured as GPIO.
> > +	 */
> > +	ret = device_property_present(&client->dev,
> > +			"keypad,num-rows");
> > +	ret |= device_property_present(&client->dev,
> > +			"keypad,num-columns");
> > +	/* If purely GPIO, skip keypad setup */
> > +	if (!ret) {
> > +		kpad->gpio_only = true;
> > +		return 0;
> > +	}
> > +
> >  	ret = matrix_keypad_parse_properties(&client->dev, &kpad->rows,
> >  					     &kpad->cols);
> >  	if (ret)
> > @@ -775,6 +791,11 @@ static int adp5588_probe(struct i2c_client *client)
> >  	if (error)
> >  		return error;
> >
> > +	if (kpad->gpio_only && !client->irq) {
> > +		dev_info(&client->dev, "Rev.%d, started as GPIO only\n",
> > revid);
> > +		return 0;
> > +	}
> 
> You're still missing something regarding interrupts. If there's no client->irq
> then you should not setup the gpio_irq_chip. Hence, in adp5588_gpio_add(),
> you
> should have:
> 
> if (kpad->client->irq) {
> 	girq = &kpad->gc.irq;
> 	gpio_irq_chip_set_chip(girq, &adp5588_irq_chip);
> 	girq->handler = handle_bad_irq;
> 	girq->threaded = true;
> }
> 
> - Nuno Sá

Thank you for pointing this out, I will add the same.

Thanks,
Utsav

RE: [PATCH v6 3/3] dt-bindings: input: Update dtbinding for adp5588

[Agarwal, Utsav]

Hi Krzysztof,

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: Thursday, July 4, 2024 11:59 AM
> To: Agarwal, Utsav <Utsav.Agarwal@analog.com>; Hennerich, Michael
> <Michael.Hennerich@analog.com>; Dmitry Torokhov
> <dmitry.torokhov@gmail.com>; Rob Herring <robh@kernel.org>; Krzysztof
> Kozlowski <krzk+dt@kernel.org>; Conor Dooley <conor+dt@kernel.org>; Sa,
> Nuno <Nuno.Sa@analog.com>
> Cc: linux-input@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; Artamonovs, Arturs
> <Arturs.Artamonovs@analog.com>; Bimpikas, Vasileios
> <Vasileios.Bimpikas@analog.com>; Gaskell, Oliver
> <Oliver.Gaskell@analog.com>
> Subject: Re: [PATCH v6 3/3] dt-bindings: input: Update dtbinding for adp5588
> 
> [External]
> 
> On 04/07/2024 12:45, Utsav Agarwal via B4 Relay wrote:
> > +
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/input/input.h>
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +        gpio@34 {
> > +            compatible = "adi,adp5588";
> > +            reg = <0x34>;
> > +
> > +            #gpio-cells = <2>;
> > +            gpio-controller;
> > +            };
> 
> Fix your indentation. It's total mess above.
> 
> Best regards,
> Krzysztof

Apologies for the same, I will be fixing it.

Thanks,
Utsav