* Re: Sony DualShock4 - basic functions work, but looking to improve support
From: David Herrmann @ 2013-12-08 14:41 UTC (permalink / raw)
To: Simon Wood; +Cc: Linux Input, Antonio Ospite, Jiri Kosina
In-Reply-To: <10aade622f5593ec49af0256e3c60d83.squirrel@mungewell.org>
Hi
On Sat, Dec 7, 2013 at 9:43 PM, <simon@mungewell.org> wrote:
>> Anyone here want to collaborate?
>
> I've decoded the majority of the HID stream including the multi-touch.
Nice! I already got my hands on one but will probably not find time
for it until February. However, I will gladly test any patches!
Also, could you write your findings down and maybe put it into
./Documentation/hid/? I'm not sure whether we put protocol data there
(Jiri?) but at least you could share the information on the list or
github. I would appreciate that a lot!
Thanks
David
^ permalink raw reply
* Re: Xpad Driver Replacement
From: David Herrmann @ 2013-12-08 14:38 UTC (permalink / raw)
To: Zachary Lund; +Cc: open list:HID CORE LAYER
In-Reply-To: <52A40F19.3020109@computerquip.com>
Hi
On Sun, Dec 8, 2013 at 7:18 AM, Zachary Lund <admin@computerquip.com> wrote:
> I created a new driver to hopefully eventually replace xpad. The driver in
> its current form can be found on github. Things it provides is cleaner
> module unload/load, possibly cleaner/more efficient code, and better LED
> support. There are caveats that I'd like to iron out before I submit a patch
> though.
Please submit the patch right away. No-one minds commenting on
preliminary ideas. On the contrary, we can tell you whether the basic
idea makes sense right from the beginning.
> For one, I do not have the original Xbox controller. I've only tested the
> official Xbox 360 Wired and Wireless controllers. So support for that is
> unfortunately missing. I'm not sure how I feel about ripping it out of xpad.
> What am I supposed to do about devices that I don't own?
The old controllers are incompatible with the 360, so I'd keep the old
driver around with only the old VID/PID combinations. Btw., if you
live in the US, you can order one used from amazon for <10$.
Unfortunately, they only ship to the US so I haven't gotten my hands
on one of these.. Maybe you can find someone else if you don't
can/want to buy it?
> Secondly, the Xbox 360 controllers claim to be HID compliant... this is not
> an HID driver. That's because the report descriptor is missing and I,
> unfortunately, do not know what to do about that. Some drivers like XBCD and
> the driver found at tattiebogle.net both provide their own report descriptor
> and work from there. While I'd like to do the same eventually, it will take
> me longer than a week to do that as I'd have to educate myself on HID and
> figure out what to do about the missing descriptors.
>
> Thirdly, I have had no other testers outside of myself. And the only
> products I've tested are the only items in the device_id list. So, if anyone
> can test, that would amazing. I've posted on several forums and IRC channels
> for help testing or new products with unfortunately zero results. Anyone who
> is able to test and just use it extensively, that would be much appreciated.
>
> The code in its current form is found on github:
> https://github.com/computerquip/xpad360wr
>
> Any advice or feedback would be much appreciated.
Please post it to the list, there's a bunch of stuff that needs to be
changed. And please turn it into an HID driver. You don't need to use
HID reports at all! The hid-wiimote driver for instance just uses raw
I/O on HID without dealing with HID report descriptors at all (just
like hidraw).
For raw HID drivers, you simply use the ->raw_event callback to parse
incoming data and dev->output_raw_report() to send raw data.
Thanks for the work! I will gladly test it with the 360 controller
once you send a proper upstream patch.
Thanks
David
^ permalink raw reply
* Xpad Driver Replacement
From: Zachary Lund @ 2013-12-08 6:18 UTC (permalink / raw)
To: linux-input
I created a new driver to hopefully eventually replace xpad. The driver
in its current form can be found on github. Things it provides is
cleaner module unload/load, possibly cleaner/more efficient code, and
better LED support. There are caveats that I'd like to iron out before I
submit a patch though.
For one, I do not have the original Xbox controller. I've only tested
the official Xbox 360 Wired and Wireless controllers. So support for
that is unfortunately missing. I'm not sure how I feel about ripping it
out of xpad. What am I supposed to do about devices that I don't own?
Secondly, the Xbox 360 controllers claim to be HID compliant... this is
not an HID driver. That's because the report descriptor is missing and
I, unfortunately, do not know what to do about that. Some drivers like
XBCD and the driver found at tattiebogle.net both provide their own
report descriptor and work from there. While I'd like to do the same
eventually, it will take me longer than a week to do that as I'd have to
educate myself on HID and figure out what to do about the missing
descriptors.
Thirdly, I have had no other testers outside of myself. And the only
products I've tested are the only items in the device_id list. So, if
anyone can test, that would amazing. I've posted on several forums and
IRC channels for help testing or new products with unfortunately zero
results. Anyone who is able to test and just use it extensively, that
would be much appreciated.
The code in its current form is found on github:
https://github.com/computerquip/xpad360wr
Any advice or feedback would be much appreciated.
^ permalink raw reply
* Re: [PATCH] Input: serio - fix sysfs layout
From: Thomas Hellstrom @ 2013-12-07 20:51 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, Greg Kroah-Hartman, linux-kernel
In-Reply-To: <20131207154116.GA9902@core.coreip.homeip.net>
On 12/07/2013 04:41 PM, Dmitry Torokhov wrote:
> Restore previous layout of sysfs attributes that was broken by commit
> 3778a2129bcce84f684cc0017ed20d2524afd289 (input: serio: remove bus usage of
> dev_attrs) which moved all serio device attributes into 'id' group, when
> only 'type', 'proto', 'id', and 'extra' should be in 'id' group and the
> rest of attributes should be attached directly to the device.
Thanks for doing this. Makes vmmouse work again.
>
> Reported-by: Thomas Hellstrom <thellstrom@vmware.com>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
> ---
> drivers/input/serio/serio.c | 24 +++++++++++++++++-------
> 1 file changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
> index 98707fb..8f4c4ab 100644
> --- a/drivers/input/serio/serio.c
> +++ b/drivers/input/serio/serio.c
> @@ -455,16 +455,26 @@ static DEVICE_ATTR_RO(type);
> static DEVICE_ATTR_RO(proto);
> static DEVICE_ATTR_RO(id);
> static DEVICE_ATTR_RO(extra);
> -static DEVICE_ATTR_RO(modalias);
> -static DEVICE_ATTR_WO(drvctl);
> -static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL);
> -static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode);
>
> static struct attribute *serio_device_id_attrs[] = {
> &dev_attr_type.attr,
> &dev_attr_proto.attr,
> &dev_attr_id.attr,
> &dev_attr_extra.attr,
> + NULL
> +};
> +
> +static struct attribute_group serio_id_attr_group = {
> + .name = "id",
> + .attrs = serio_device_id_attrs,
> +};
> +
> +static DEVICE_ATTR_RO(modalias);
> +static DEVICE_ATTR_WO(drvctl);
> +static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL);
> +static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode);
> +
> +static struct attribute *serio_device_attrs[] = {
> &dev_attr_modalias.attr,
> &dev_attr_description.attr,
> &dev_attr_drvctl.attr,
> @@ -472,13 +482,13 @@ static struct attribute *serio_device_id_attrs[] = {
> NULL
> };
>
> -static struct attribute_group serio_id_attr_group = {
> - .name = "id",
> - .attrs = serio_device_id_attrs,
> +static struct attribute_group serio_device_attr_group = {
> + .attrs = serio_device_attrs,
> };
>
> static const struct attribute_group *serio_device_attr_groups[] = {
> &serio_id_attr_group,
> + &serio_device_attr_group,
> NULL
> };
>
^ permalink raw reply
* Re: Sony DualShock4 - basic functions work, but looking to improve support
From: simon @ 2013-12-07 20:43 UTC (permalink / raw)
Cc: Linux Input, Antonio Ospite
In-Reply-To: <61a33717137a02a1d0eac5a2d1cb257e.squirrel@mungewell.org>
[-- Attachment #1: Type: text/plain, Size: 262 bytes --]
> Anyone here want to collaborate?
I've decoded the majority of the HID stream including the multi-touch.
Also some good teardown info/pictures here:
http://mygaming.co.za/news/ps4/60397-cost-of-building-a-ps4.html
fccid = AK8CUHZCT1
ic = 409B-CUHZCT1
Simon.
[-- Attachment #2: hidraw.txt --]
[-- Type: text/plain, Size: 5235 bytes --]
01 7e 7c 80 7f 08 00 04 00 00 6f 35 0d 06 00 03 00 01 00 69 04 ff 1e 9d f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 08 00 00 53 38 0d 01 00 f9 ff 02 00 8d 04 e5 1e b5 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 0c 00 00 40 3b 0d 00 00 04 00 04 00 7d 04 eb 1e a9 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 10 00 00 81 76 0d f7 ff 00 00 00 00 5d 04 f7 1e b2 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 14 00 00 67 79 0d f1 ff 00 00 f2 ff dd 04 bb 1f 55 f9 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 18 00 00 56 7c 0d 16 00 fc ff ff ff 75 04 db 1f 9d f9 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 1c 00 00 3f 7f 0d 3a 00 f3 ff 12 00 c5 03 9f 1f b9 f9 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 20 00 00 2b 82 0d 4f 00 fa ff 10 00 e7 03 75 1f c8 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 24 00 00 27 85 0d 5d 00 fe ff 12 00 f9 03 43 1f a1 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 28 00 00 04 88 0d 61 00 f9 ff 18 00 55 04 c7 1e c5 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 2c 00 00 f1 8a 0d 53 00 fc ff 1a 00 b1 04 57 1e 75 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 30 00 00 de 8d 0d 49 00 fd ff 14 00 b1 04 53 1e 19 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 34 00 00 cc 90 0d 35 00 fd ff 0d 00 b9 04 1b 1e d5 f7 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 38 00 00 bf 93 0d 10 00 fb ff 09 00 99 04 23 1e e5 f7 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 3c 00 00 a5 96 0d fc ff 01 00 fe ff 6a 04 35 1e eb f7 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 40 00 00 94 99 0d dc ff 06 00 f9 ff 71 04 57 1e 31 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 44 00 00 81 9c 0d d1 ff ff ff f8 ff 55 04 83 1e 7d f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
01 7e 7c 80 7f 08 00 48 00 00 69 9f 0d ce ff 05 00 f6 ff 4d 04 fb 1e c9 f8 00 00 00 00 00 1b 00 00 01 79 96 8e 85 01 8b 20 21 24 00 80 00 00 00 80 00 00 00 00 80 00 00 00 80 00 00 00 00 80 00
|| || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || ||
|| || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || || ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ touch pad (see below)
|| || || || || || || || || || || || || || || || || || || || || || || || || ++ ++ ++ ++ ++ ++ ++ ++ fixed?
|| || || || || || || || || || || || || || || || || || || ++ ++ ++ ++ ++ ++ Accelerometers X, Y, Z (lsb, msb)
|| || || || || || || || || || || || || ++ ++ ++ ++ ++ ++ Gyros pitch, roll, yaw (lsb, msb)
|| || || || || || || || || || || || ++ fixed or slowly changing?
|| || || || || || || || || || ++ ++ always changing = time stamp ?
|| || || || || || || || || ++ R-Trigger
|| || || || || || || || ++ L-Trigger
|| || || || || || || ++ Count by 0x04?
|| || || || || ++ ++ Button bit field
|| || || || ++ R-Thumb Y
|| || || ++ R-Thumb X
|| || ++ L-Thumb Y
|| ++ L-Thumb X
++ alway 01
Multitouch section, allows for 2 simulataneous fingers
--
01 9f bc a9 d4 1c bd 0e f7 0d 00 80 00 00 00 80 00 00 00
|| || || || || || || || || || ++ ++ ++ ++ ++ ++ ++ ++ ++ only present while swiping, last position format as below
|| || || || || || || || +| ++ 2nd Y location
|| || || || || || || ++ |+ 2nd X location
|| || || || || || ++ 2nd event number
|| || || || +| ++ current Y location (lsb + msb, top = 0)
|| || || ++ |+ current X location (lsb + msb, left = 0)? note nibble order!!
|| || ++ event number, remains constant during press, counts up each time press starts, high bit set on release (ie 43->c3)
|| ++ presure/size? changes with both 1st of 2nd finger
++ type of data packets (1=static or 2=motion)
^ permalink raw reply
* [MailServer Notification]Attachment Blocking Notification
From: ExchangeNTTrendMicro @ 2013-12-07 17:53 UTC (permalink / raw)
To: linux-input; +Cc: ospite
The des.bin has been blocked,
and Replace has been taken on 12/7/2013 9:52:56 AM.
Message details:
Server:WACOM-NT10
Sender: simon@mungewell.org;
Recipient:linux-input@vger.kernel.org;ospite@studenti.unina.it;
Subject:Sony DualShock4 - basic functions work, but looking to improve support
Attachment name:des.bin
^ permalink raw reply
* Sony DualShock4 - basic functions work, but looking to improve support
From: simon @ 2013-12-07 17:52 UTC (permalink / raw)
To: Linux Input; +Cc: Antonio Ospite
[-- Attachment #1: Type: text/plain, Size: 507 bytes --]
Hi all,
I wanted to report that basic functions of the DualShock4 work under Linux
(USB connected), but I'd like to work on it to get everything working -
like we have on the DualShock3.
Attached are a couple of logs and the report descriptor.
Haptic/Rumble does not work, even though I have my machine patched to make
DualShock3 work.
If we look at the hidraw stream there's a lot (64 bytes) more there!
--
$ hexdump -v -e '64/1 "%02x " "\n"' < /dev/hidraw0
--
Anyone here want to collaborate?
Simon
[-- Attachment #2: lsusb_vv.txt --]
[-- Type: text/plain, Size: 2355 bytes --]
Bus 003 Device 002: ID 054c:05c4 Sony Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x054c Sony Corp.
idProduct 0x05c4
bcdDevice 1.00
iManufacturer 1 Sony Computer Entertainment
iProduct 2 Wireless Controller
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 467
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Device Status: 0x0000
(Bus Powered)
[-- Attachment #3: des.code --]
[-- Type: application/octet-stream, Size: 14490 bytes --]
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x05, /* Usage (Gamepad), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x01, /* Report ID (1), */
0x09, 0x30, /* Usage (X), */
0x09, 0x31, /* Usage (Y), */
0x09, 0x32, /* Usage (Z), */
0x09, 0x35, /* Usage (Rz), */
0x15, 0x00, /* Logical Minimum (0), */
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x39, /* Usage (Hat Switch), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x07, /* Logical Maximum (7), */
0x35, 0x00, /* Physical Minimum (0), */
0x46, 0x3B, 0x01, /* Physical Maximum (315), */
0x65, 0x14, /* Unit (Degrees), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x42, /* Input (Variable, Null State), */
0x65, 0x00, /* Unit, */
0x05, 0x09, /* Usage Page (Button), */
0x19, 0x01, /* Usage Minimum (01h), */
0x29, 0x0E, /* Usage Maximum (0Eh), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x0E, /* Report Count (14), */
0x81, 0x02, /* Input (Variable), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x20, /* Usage (20h), */
0x75, 0x06, /* Report Size (6), */
0x95, 0x01, /* Report Count (1), */
0x15, 0x00, /* Logical Minimum (0), */
0x25, 0x7F, /* Logical Maximum (127), */
0x81, 0x02, /* Input (Variable), */
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x33, /* Usage (Rx), */
0x09, 0x34, /* Usage (Ry), */
0x15, 0x00, /* Logical Minimum (0), */
0x26, 0xFF, 0x00, /* Logical Maximum (255), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x02, /* Report Count (2), */
0x81, 0x02, /* Input (Variable), */
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x36, /* Report Count (54), */
0x81, 0x02, /* Input (Variable), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x1F, /* Report Count (31), */
0x91, 0x02, /* Output (Variable), */
0x85, 0x04, /* Report ID (4), */
0x09, 0x23, /* Usage (23h), */
0x95, 0x24, /* Report Count (36), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x02, /* Report ID (2), */
0x09, 0x24, /* Usage (24h), */
0x95, 0x24, /* Report Count (36), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x08, /* Report ID (8), */
0x09, 0x25, /* Usage (25h), */
0x95, 0x03, /* Report Count (3), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x26, /* Usage (26h), */
0x95, 0x04, /* Report Count (4), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x11, /* Report ID (17), */
0x09, 0x27, /* Usage (27h), */
0x95, 0x02, /* Report Count (2), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x12, /* Report ID (18), */
0x06, 0x02, 0xFF, /* Usage Page (FF02h), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x0F, /* Report Count (15), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x13, /* Report ID (19), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x16, /* Report Count (22), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x14, /* Report ID (20), */
0x06, 0x05, 0xFF, /* Usage Page (FF05h), */
0x09, 0x20, /* Usage (20h), */
0x95, 0x10, /* Report Count (16), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x15, /* Report ID (21), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x2C, /* Report Count (44), */
0xB1, 0x02, /* Feature (Variable), */
0x06, 0x80, 0xFF, /* Usage Page (FF80h), */
0x85, 0x80, /* Report ID (128), */
0x09, 0x20, /* Usage (20h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x81, /* Report ID (129), */
0x09, 0x21, /* Usage (21h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x82, /* Report ID (130), */
0x09, 0x22, /* Usage (22h), */
0x95, 0x05, /* Report Count (5), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x83, /* Report ID (131), */
0x09, 0x23, /* Usage (23h), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x84, /* Report ID (132), */
0x09, 0x24, /* Usage (24h), */
0x95, 0x04, /* Report Count (4), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x85, /* Report ID (133), */
0x09, 0x25, /* Usage (25h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x86, /* Report ID (134), */
0x09, 0x26, /* Usage (26h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x87, /* Report ID (135), */
0x09, 0x27, /* Usage (27h), */
0x95, 0x23, /* Report Count (35), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x88, /* Report ID (136), */
0x09, 0x28, /* Usage (28h), */
0x95, 0x22, /* Report Count (34), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x89, /* Report ID (137), */
0x09, 0x29, /* Usage (29h), */
0x95, 0x02, /* Report Count (2), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x90, /* Report ID (144), */
0x09, 0x30, /* Usage (30h), */
0x95, 0x05, /* Report Count (5), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x91, /* Report ID (145), */
0x09, 0x31, /* Usage (31h), */
0x95, 0x03, /* Report Count (3), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x92, /* Report ID (146), */
0x09, 0x32, /* Usage (32h), */
0x95, 0x03, /* Report Count (3), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0x93, /* Report ID (147), */
0x09, 0x33, /* Usage (33h), */
0x95, 0x0C, /* Report Count (12), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA0, /* Report ID (160), */
0x09, 0x40, /* Usage (40h), */
0x95, 0x06, /* Report Count (6), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA1, /* Report ID (161), */
0x09, 0x41, /* Usage (41h), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA2, /* Report ID (162), */
0x09, 0x42, /* Usage (42h), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA3, /* Report ID (163), */
0x09, 0x43, /* Usage (43h), */
0x95, 0x30, /* Report Count (48), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA4, /* Report ID (164), */
0x09, 0x44, /* Usage (44h), */
0x95, 0x0D, /* Report Count (13), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA5, /* Report ID (165), */
0x09, 0x45, /* Usage (45h), */
0x95, 0x15, /* Report Count (21), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA6, /* Report ID (166), */
0x09, 0x46, /* Usage (46h), */
0x95, 0x15, /* Report Count (21), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF0, /* Report ID (240), */
0x09, 0x47, /* Usage (47h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF1, /* Report ID (241), */
0x09, 0x48, /* Usage (48h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xF2, /* Report ID (242), */
0x09, 0x49, /* Usage (49h), */
0x95, 0x0F, /* Report Count (15), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA7, /* Report ID (167), */
0x09, 0x4A, /* Usage (4Ah), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA8, /* Report ID (168), */
0x09, 0x4B, /* Usage (4Bh), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xA9, /* Report ID (169), */
0x09, 0x4C, /* Usage (4Ch), */
0x95, 0x08, /* Report Count (8), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAA, /* Report ID (170), */
0x09, 0x4E, /* Usage (4Eh), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAB, /* Report ID (171), */
0x09, 0x4F, /* Usage (4Fh), */
0x95, 0x39, /* Report Count (57), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAC, /* Report ID (172), */
0x09, 0x50, /* Usage (50h), */
0x95, 0x39, /* Report Count (57), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAD, /* Report ID (173), */
0x09, 0x51, /* Usage (51h), */
0x95, 0x0B, /* Report Count (11), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAE, /* Report ID (174), */
0x09, 0x52, /* Usage (52h), */
0x95, 0x01, /* Report Count (1), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xAF, /* Report ID (175), */
0x09, 0x53, /* Usage (53h), */
0x95, 0x02, /* Report Count (2), */
0xB1, 0x02, /* Feature (Variable), */
0x85, 0xB0, /* Report ID (176), */
0x09, 0x54, /* Usage (54h), */
0x95, 0x3F, /* Report Count (63), */
0xB1, 0x02, /* Feature (Variable), */
0xC0 /* End Collection */
[-- Attachment #4: des.bin --]
[-- Type: application/octet-stream, Size: 467 bytes --]
[-- Attachment #5: jstest.txt --]
[-- Type: text/plain, Size: 1021 bytes --]
Driver version is 2.1.0.
Joystick (Sony Computer Entertainment Wireless Controller) has 8 axes (X, Y, Z, Rx, Ry, Rz, Hat0X, Hat0Y)
and 14 buttons (BtnX, BtnY, BtnZ, BtnTL, BtnTR, BtnTL2, BtnTR2, BtnSelect, BtnStart, BtnMode, BtnThumbL, BtnThumbR, ?, ?).
Testing ... (interrupt to exit)
Axes: 0: 0 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 7: 0 Buttons: 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off 8:off 9:off 10:off 11:off 12:off 13:off
Axes:
0: 0 L-Thumbstick X (left -ve)
1: 0 L-Thumbstick Y (up -ve)
2: 0 R-Thumbstick X (left -ve)
3: 0 L-Trigger (released -ve)
4: 0 R-Trigger (released -ve)
5: 0 R-Thumbstick Y (up -ve)
6: 0 D-Pad X (left -ve)
7: 0 D-Pad Y (up -ve)
Buttons:
0:off Square
1:off Cross
2:off Circle
3:off Triangle
4:off L1 (Shoulder)
5:off R1 (Shoulder)
6:off L2 (Trigger) - also axis
7:off R2 (Trigger) - also axis
8:off Share
9:off Options
10:off L-Thumbstick
11:off R-Thumbstick
12:off PS
13:off TouchPad
[-- Attachment #6: syslog.txt --]
[-- Type: text/plain, Size: 1216 bytes --]
Dec 7 09:59:31 womble kernel: [ 190.548071] usb 3-2: new full-speed USB device number 2 using uhci_hcd
Dec 7 09:59:31 womble kernel: [ 190.723988] usb 3-2: New USB device found, idVendor=054c, idProduct=05c4
Dec 7 09:59:31 womble kernel: [ 190.724001] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Dec 7 09:59:31 womble kernel: [ 190.724039] usb 3-2: Product: Wireless Controller
Dec 7 09:59:31 womble kernel: [ 190.724049] usb 3-2: Manufacturer: Sony Computer Entertainment
Dec 7 09:59:32 womble mtp-probe: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"
Dec 7 09:59:32 womble mtp-probe: bus: 3, device: 2 was not an MTP device
Dec 7 09:59:32 womble kernel: [ 191.302128] usbcore: registered new interface driver usbhid
Dec 7 09:59:32 womble kernel: [ 191.302135] usbhid: USB HID core driver
Dec 7 09:59:32 womble kernel: [ 191.397030] input: Sony Computer Entertainment Wireless Controller as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input7
Dec 7 09:59:32 womble kernel: [ 191.397438] hid-generic 0003:054C:05C4.0001: input,hidraw0: USB HID v1.11 Gamepad [Sony Computer Entertainment Wireless Controller] on usb-0000:00:1d.1-2/input0
^ permalink raw reply
* Re: [PATCH] Input: serio - fix sysfs layout
From: Greg Kroah-Hartman @ 2013-12-07 17:12 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, Thomas Hellstrom, linux-kernel
In-Reply-To: <20131207154116.GA9902@core.coreip.homeip.net>
On Sat, Dec 07, 2013 at 07:41:19AM -0800, Dmitry Torokhov wrote:
> Restore previous layout of sysfs attributes that was broken by commit
> 3778a2129bcce84f684cc0017ed20d2524afd289 (input: serio: remove bus usage of
> dev_attrs) which moved all serio device attributes into 'id' group, when
> only 'type', 'proto', 'id', and 'extra' should be in 'id' group and the
> rest of attributes should be attached directly to the device.
Ick, sorry about that.
> Reported-by: Thomas Hellstrom <thellstrom@vmware.com>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
^ permalink raw reply
* Re: synaptics: PS/2 touchpad isn't detected if a keyboard key is held down on boot
From: Andrey Moiseev @ 2013-12-07 16:49 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input, linux-kernel, linux-hotplug
In-Reply-To: <20131207160246.GA11635@core.coreip.homeip.net>
Here is my dmesg. At boot 'H' key was held down.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc3-ARCH-dirty (o2genum@o2pc) (gcc version 4.8.2 (GCC) ) #10 SMP PREEMPT Sat Dec 7 20:25:41 MSK 2013
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-mainline i8042.debug=1 root=UUID=747f676b-e21a-443a-ac61-3f6c4aebb73d rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007b680fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b681000-0x000000007b6befff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b6bf000-0x000000007b757fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b758000-0x000000007b7befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b7bf000-0x000000007b7e2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b7e3000-0x000000007b7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007b7ff000-0x000000007b7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b800000-0x000000007bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: LENOVO 20035 /Base Board Product Name, BIOS 1ECN33WW(V5.07) 03/17/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7b800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-combining
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07B800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7b400000-0x7b5fffff]
[ 0.000000] [mem 0x7b400000-0x7b5fffff] page 2M
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x78000000-0x7b3fffff]
[ 0.000000] [mem 0x78000000-0x7b3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x77ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x77ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7b600000-0x7b680fff]
[ 0.000000] [mem 0x7b600000-0x7b680fff] page 4k
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7b6bf000-0x7b757fff]
[ 0.000000] [mem 0x7b6bf000-0x7b757fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7b7bf000-0x7b7e2fff]
[ 0.000000] [mem 0x7b7bf000-0x7b7e2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7b7ff000-0x7b7fffff]
[ 0.000000] [mem 0x7b7ff000-0x7b7fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x378d4000-0x37c61fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 000000007b7fe120 000084 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 000000007b7fc000 0000F4 (v04 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000007b7ef000 00992C (v02 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000007b76a000 000040
[ 0.000000] ACPI: ASF! 000000007b7fd000 0000A5 (v32 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000007b7fb000 000038 (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000007b7fa000 00008C (v02 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000007b7f9000 00003C (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIX 000000007b7ee000 000176 (v01 LENOVO CB-01 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 000000007b7eb000 000028 (v01 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 000000007b7e7000 000034 (v04 INTEL Calpella 00000001 MSFT 01000013)
[ 0.000000] ACPI: WDRT 000000007b7e6000 000047 (v01 INTEL Calpella 00000000 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000007b7e5000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000007b7e4000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000007b7e3000 00049F (v01 PmRef ApTst 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007b7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7b7fffff]
[ 0.000000] NODE_DATA [mem 0x7b7de000-0x7b7e2fff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880078e00000-ffff88007adfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x7b680fff]
[ 0.000000] node 0: [mem 0x7b6bf000-0x7b757fff]
[ 0.000000] node 0: [mem 0x7b7bf000-0x7b7e2fff]
[ 0.000000] node 0: [mem 0x7b7ff000-0x7b7fffff]
[ 0.000000] On node 0 totalpages: 505563
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7840 pages used for memmap
[ 0.000000] DMA32 zone: 501567 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b681000-0x7b6befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b758000-0x7b7befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b7e3000-0x7b7fefff]
[ 0.000000] e820: [mem 0x7c000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007b400000 s86272 r8192 d24320 u262144
[ 0.000000] pcpu-alloc: s86272 r8192 d24320 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 497638
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-mainline i8042.debug=1 root=UUID=747f676b-e21a-443a-ac61-3f6c4aebb73d rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1973032K/2022252K available (5151K kernel code, 815K rwdata, 1728K rodata, 1160K init, 1304K bss, 49220K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2127.841 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.00 BogoMIPS (lpj=7092803)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000040] Security Framework initialized
[ 0.000052] AppArmor: AppArmor disabled by boot time parameter
[ 0.000053] Yama: becoming mindful.
[ 0.000227] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000932] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001223] Mount-cache hash table entries: 256
[ 0.001448] Initializing cgroup subsys memory
[ 0.001456] Initializing cgroup subsys devices
[ 0.001459] Initializing cgroup subsys freezer
[ 0.001461] Initializing cgroup subsys net_cls
[ 0.001462] Initializing cgroup subsys blkio
[ 0.001486] CPU: Physical Processor ID: 0
[ 0.001488] CPU: Processor Core ID: 0
[ 0.001494] mce: CPU supports 9 MCE banks
[ 0.001505] CPU0: Thermal monitoring enabled (TM1)
[ 0.001516] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.001606] Freeing SMP alternatives memory: 20K (ffffffff819ef000 - ffffffff819f4000)
[ 0.002796] ACPI: Core revision 20131115
[ 0.012879] ACPI: All ACPI Tables successfully acquired
[ 0.179442] ftrace: allocating 20458 entries in 80 pages
[ 0.191816] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.224806] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz (fam: 06, model: 25, stepping: 02)
[ 0.330332] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.330340] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.330343] ... version: 3
[ 0.330344] ... bit width: 48
[ 0.330345] ... generic registers: 4
[ 0.330346] ... value mask: 0000ffffffffffff
[ 0.330347] ... max period: 000000007fffffff
[ 0.330348] ... fixed-purpose events: 3
[ 0.330349] ... event mask: 000000070000000f
[ 0.357070] x86: Booting SMP configuration:
[ 0.370446] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.357072] .... node #0, CPUs: #1 #2 #3
[ 0.410323] x86: Booted up 1 node, 4 CPUs
[ 0.410328] smpboot: Total of 4 processors activated (17029.00 BogoMIPS)
[ 0.412942] devtmpfs: initialized
[ 0.416343] PM: Registering ACPI NVS region [mem 0x7b758000-0x7b7befff] (421888 bytes)
[ 0.417415] RTC time: 16:39:27, date: 12/07/13
[ 0.417460] NET: Registered protocol family 16
[ 0.417574] cpuidle: using governor ladder
[ 0.417576] cpuidle: using governor menu
[ 0.417592] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.417594] ACPI: bus type PCI registered
[ 0.417596] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.417675] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.417678] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.438612] PCI: Using configuration type 1 for base access
[ 0.438752] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.438753] mtrr: probably your BIOS does not setup all CPUs.
[ 0.438754] mtrr: corrected configuration.
[ 0.439244] bio: create slab <bio-0> at 0
[ 0.439371] ACPI: Added _OSI(Module Device)
[ 0.439374] ACPI: Added _OSI(Processor Device)
[ 0.439375] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.439377] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.443160] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.470309] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.470733] ACPI: SSDT 000000007b691c18 0003A0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.471190] ACPI: Dynamic OEM Table Load:
[ 0.471192] ACPI: SSDT (null) 0003A0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.471342] ACPI: SSDT 000000007b68f618 0005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.471783] ACPI: Dynamic OEM Table Load:
[ 0.471785] ACPI: SSDT (null) 0005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.497221] ACPI: SSDT 000000007b690a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.497727] ACPI: Dynamic OEM Table Load:
[ 0.497729] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.510396] ACPI: SSDT 000000007b68ed98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.510866] ACPI: Dynamic OEM Table Load:
[ 0.510868] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.535990] ACPI: Interpreter enabled
[ 0.536002] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.536009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.536033] ACPI: (supports S0 S3 S4 S5)
[ 0.536035] ACPI: Using IOAPIC for interrupt routing
[ 0.536076] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.536263] ACPI: No dock devices found.
[ 0.621788] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.621795] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.621831] \_SB_.PCI0:_OSC invalid UUID
[ 0.621833] _OSC request data:1 1f 0
[ 0.621837] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.622688] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.622691] ACPI: \_SB_.PCI0.MIR_: can't evaluate _ADR (0x5)
[ 0.622703] PCI host bridge to bus 0000:00
[ 0.622705] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.622708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.622710] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.622712] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.622714] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[ 0.622722] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.622742] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.622827] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.622864] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.622916] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.622993] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.623376] pci 0000:00:1a.0: reg 0x10: [mem 0x99105c00-0x99105fff]
[ 0.625583] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.625668] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.625718] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.625742] pci 0000:00:1b.0: reg 0x10: [mem 0x99100000-0x99103fff 64bit]
[ 0.625842] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.625905] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.625946] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.626048] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.626112] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.626151] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.626253] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.626351] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.626454] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.626562] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.626942] pci 0000:00:1d.0: reg 0x10: [mem 0x99105800-0x99105bff]
[ 0.629155] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.629238] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.629284] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.629410] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.629448] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.629647] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.629675] pci 0000:00:1f.2: reg 0x10: [io 0x5048-0x504f]
[ 0.629687] pci 0000:00:1f.2: reg 0x14: [io 0x5054-0x5057]
[ 0.629699] pci 0000:00:1f.2: reg 0x18: [io 0x5040-0x5047]
[ 0.629710] pci 0000:00:1f.2: reg 0x1c: [io 0x5050-0x5053]
[ 0.629722] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
[ 0.629734] pci 0000:00:1f.2: reg 0x24: [mem 0x99105000-0x991057ff]
[ 0.629802] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.629893] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.629915] pci 0000:00:1f.3: reg 0x10: [mem 0x99106000-0x991060ff 64bit]
[ 0.629946] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
[ 0.630105] pci 0000:01:00.0: [10de:0a34] type 00 class 0x030000
[ 0.630120] pci 0000:01:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[ 0.630134] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.630148] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[ 0.630158] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
[ 0.630168] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.630280] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
[ 0.630294] pci 0000:01:00.1: reg 0x10: [mem 0x93000000-0x93003fff]
[ 0.630446] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.630449] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.630452] pci 0000:00:01.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.630456] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.630544] acpiphp: Slot [1] registered
[ 0.630551] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[ 0.630556] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.630562] pci 0000:00:1c.0: bridge window [mem 0x98100000-0x990fffff]
[ 0.630569] pci 0000:00:1c.0: bridge window [mem 0x93100000-0x940fffff 64bit pref]
[ 0.630690] pci 0000:06:00.0: [168c:002b] type 00 class 0x028000
[ 0.630722] pci 0000:06:00.0: reg 0x10: [mem 0x97100000-0x9710ffff 64bit]
[ 0.630868] pci 0000:06:00.0: supports D1
[ 0.630870] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.640219] pci 0000:00:1c.1: PCI bridge to [bus 06]
[ 0.640230] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.640239] pci 0000:00:1c.1: bridge window [mem 0x97100000-0x980fffff]
[ 0.640252] pci 0000:00:1c.1: bridge window [mem 0x94100000-0x950fffff 64bit pref]
[ 0.640408] pci 0000:07:00.0: [14e4:1692] type 00 class 0x020000
[ 0.640452] pci 0000:07:00.0: reg 0x10: [mem 0x96100000-0x9610ffff 64bit]
[ 0.640680] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.640737] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.650242] pci 0000:00:1c.2: PCI bridge to [bus 07]
[ 0.650254] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.650259] pci 0000:00:1c.2: bridge window [mem 0x96100000-0x970fffff]
[ 0.650267] pci 0000:00:1c.2: bridge window [mem 0x95100000-0x960fffff 64bit pref]
[ 0.650353] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.650366] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.650369] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.650371] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.650373] pci 0000:00:1e.0: bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[ 0.677353] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.677413] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.677471] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.677528] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.677585] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.677642] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.677699] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.677756] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.677805] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.677809] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.677814] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.677888] PCI host bridge to bus 0000:ff
[ 0.677891] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.677897] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.677943] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.677991] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.678037] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.678080] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.678122] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.678493] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.678501] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.678560] ACPI: \_SB_.CPBG: notify handler is installed
[ 0.678571] Found 2 acpi root devices
[ 0.678604] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.678714] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.678717] vgaarb: loaded
[ 0.678718] vgaarb: bridge control possible 0000:01:00.0
[ 0.678760] PCI: Using ACPI for IRQ routing
[ 0.688654] PCI: pci_cache_line_size set to 64 bytes
[ 0.688788] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.688790] e820: reserve RAM buffer [mem 0x7b681000-0x7bffffff]
[ 0.688792] e820: reserve RAM buffer [mem 0x7b758000-0x7bffffff]
[ 0.688794] e820: reserve RAM buffer [mem 0x7b7e3000-0x7bffffff]
[ 0.688795] e820: reserve RAM buffer [mem 0x7b800000-0x7bffffff]
[ 0.688898] NetLabel: Initializing
[ 0.688899] NetLabel: domain hash size = 128
[ 0.688900] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.688919] NetLabel: unlabeled traffic allowed by default
[ 0.688949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.688954] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.690986] Switched to clocksource hpet
[ 0.695899] pnp: PnP ACPI init
[ 0.695917] ACPI: bus type PNP registered
[ 0.717714] pnp 00:00: [dma 4]
[ 0.717752] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.717778] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.717900] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.717939] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.717963] pnp 00:04: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x1fff]
[ 0.718003] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.718006] system 00:04: [io 0x0800-0x080f] has been reserved
[ 0.718008] system 00:04: [io 0xffff] has been reserved
[ 0.718010] system 00:04: [io 0xffff] has been reserved
[ 0.718013] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 0.718015] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.718019] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.718051] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.718083] pnp 00:06: Plug and Play ACPI device, IDs SYN0716 SYN0700 SYN0002 PNP0f13 (active)
[ 0.718113] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.718606] pnp 00:08: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.718638] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.718641] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.718643] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.718645] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.718648] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.718650] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.718652] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.718654] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.718657] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.718660] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.718708] pnp 00:09: Plug and Play ACPI device, IDs ENE0201 (active)
[ 0.718831] pnp: PnP ACPI: found 10 devices
[ 0.718833] ACPI: bus type PNP unregistered
[ 0.725668] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.725719] pci 0000:01:00.0: BAR 6: assigned [mem 0x93080000-0x930fffff pref]
[ 0.725723] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.725725] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 0.725729] pci 0000:00:01.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.725732] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.725736] pci 0000:00:1c.0: PCI bridge to [bus 02-05]
[ 0.725739] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.725746] pci 0000:00:1c.0: bridge window [mem 0x98100000-0x990fffff]
[ 0.725751] pci 0000:00:1c.0: bridge window [mem 0x93100000-0x940fffff 64bit pref]
[ 0.725759] pci 0000:00:1c.1: PCI bridge to [bus 06]
[ 0.725762] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.725769] pci 0000:00:1c.1: bridge window [mem 0x97100000-0x980fffff]
[ 0.725774] pci 0000:00:1c.1: bridge window [mem 0x94100000-0x950fffff 64bit pref]
[ 0.725782] pci 0000:00:1c.2: PCI bridge to [bus 07]
[ 0.725785] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
[ 0.725792] pci 0000:00:1c.2: bridge window [mem 0x96100000-0x970fffff]
[ 0.725797] pci 0000:00:1c.2: bridge window [mem 0x95100000-0x960fffff 64bit pref]
[ 0.725805] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 0.725821] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.725823] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.725825] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.725827] pci_bus 0000:00: resource 7 [mem 0x7c000000-0xfeafffff]
[ 0.725829] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.725831] pci_bus 0000:01: resource 1 [mem 0x92000000-0x930fffff]
[ 0.725833] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.725835] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.725837] pci_bus 0000:02: resource 1 [mem 0x98100000-0x990fffff]
[ 0.725839] pci_bus 0000:02: resource 2 [mem 0x93100000-0x940fffff 64bit pref]
[ 0.725841] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.725843] pci_bus 0000:06: resource 1 [mem 0x97100000-0x980fffff]
[ 0.725845] pci_bus 0000:06: resource 2 [mem 0x94100000-0x950fffff 64bit pref]
[ 0.725847] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.725849] pci_bus 0000:07: resource 1 [mem 0x96100000-0x970fffff]
[ 0.725851] pci_bus 0000:07: resource 2 [mem 0x95100000-0x960fffff 64bit pref]
[ 0.725854] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.725856] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.725858] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.725860] pci_bus 0000:08: resource 7 [mem 0x7c000000-0xfeafffff]
[ 0.725898] NET: Registered protocol family 2
[ 0.726091] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.726161] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.726250] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.726281] TCP: reno registered
[ 0.726287] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.726307] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.726387] NET: Registered protocol family 1
[ 0.751130] pci 0000:01:00.0: Boot video device
[ 0.751191] PCI: CLS 64 bytes, default 64
[ 0.751240] Unpacking initramfs...
[ 0.830311] Freeing initrd memory: 3640K (ffff8800378d4000 - ffff880037c62000)
[ 0.830354] Simple Boot Flag at 0x44 set to 0x1
[ 0.830570] Scanning for low memory corruption every 60 seconds
[ 0.830914] audit: initializing netlink socket (disabled)
[ 0.830954] type=2000 audit(1386434366.563:1): initialized
[ 0.844182] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.845481] zbud: loaded
[ 0.845672] VFS: Disk quotas dquot_6.5.2
[ 0.845718] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.845899] msgmni has been set to 3860
[ 0.846287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.846349] io scheduler noop registered
[ 0.846351] io scheduler deadline registered
[ 0.846381] io scheduler cfq registered (default)
[ 0.846596] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.847065] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.847080] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.847127] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.847128] vesafb: scrolling: redraw
[ 0.847130] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.847251] vesafb: framebuffer at 0x91000000, mapped to 0xffffc90010400000, using 1216k, total 1216k
[ 0.888867] Console: switching to colour frame buffer device 80x30
[ 0.929312] fb0: VESA VGA frame buffer device
[ 0.929324] intel_idle: MWAIT substates: 0x1120
[ 0.929326] intel_idle: v0.4 model 0x25
[ 0.929327] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.929481] GHES: HEST is not enabled!
[ 0.929543] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.930041] Linux agpgart interface v0.103
[ 0.930113] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 0.930126] i8042: [0] d1 -> i8042 (command)
[ 0.930132] i8042: [0] df -> i8042 (parameter)
[ 0.930138] i8042: [0] ff -> i8042 (command)
[ 0.930198] i8042: [0] 23 <- i8042 (flush, kbd)
[ 0.930222] i8042: [0] 20 -> i8042 (command)
[ 0.930231] i8042: [0] 67 <- i8042 (return)
[ 0.930285] i8042: [0] 20 -> i8042 (command)
[ 0.930293] i8042: [0] 67 <- i8042 (return)
[ 0.930300] i8042: [0] 60 -> i8042 (command)
[ 0.932731] i8042: [0] 76 -> i8042 (parameter)
[ 0.935388] i8042: [1] d3 -> i8042 (command)
[ 0.938557] i8042: [1] 5a -> i8042 (parameter)
[ 0.938565] i8042: [1] -- i8042 (auxerr)
[ 0.940211] i8042: [3] a9 -> i8042 (command)
[ 0.940219] i8042: [3] 23 <- i8042 (return)
[ 0.940239] i8042: [3] Interrupt 1, without any data
[ 0.943719] i8042: [4] 60 -> i8042 (command)
[ 0.946731] i8042: [4] 67 -> i8042 (parameter)
[ 0.946743] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.946867] mousedev: PS/2 mouse device common for all mice
[ 0.948785] i8042: [6] f2 -> i8042 (kbd-data)
[ 0.948796] i8042: [6] 00 <- i8042 (interrupt, 0, 1)
[ 0.948854] rtc_cmos 00:05: RTC can wake from S4
[ 0.949019] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.949053] rtc_cmos 00:05: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.949134] drop_monitor: Initializing network drop monitor service
[ 0.949204] TCP: cubic registered
[ 0.949326] NET: Registered protocol family 10
[ 0.949533] NET: Registered protocol family 17
[ 0.949546] Key type dns_resolver registered
[ 0.949901] registered taskstats version 1
[ 0.950565] Magic number: 9:392:691
[ 0.957376] i8042: [7] 60 -> i8042 (command)
[ 0.960548] i8042: [9] 66 -> i8042 (parameter)
[ 0.960567] rtc_cmos 00:05: setting system clock to 2013-12-07 16:39:27 UTC (1386434367)
[ 0.960628] PM: Hibernation image not present or could not be loaded.
[ 0.962636] i8042: [9] 60 -> i8042 (command)
[ 0.965649] i8042: [11] 67 -> i8042 (parameter)
[ 0.965670] i8042: [11] 5a <- i8042 (interrupt, 1, 0)
[ 0.966669] Freeing unused kernel memory: 1160K (ffffffff818cd000 - ffffffff819ef000)
[ 0.966672] Write protecting the kernel read-only data: 8192k
[ 0.967662] i8042: [12] fa <- i8042 (interrupt, 0, 1)
[ 0.968027] i8042: [12] f2 -> i8042 (kbd-data)
[ 0.968249] i8042: [12] ab <- i8042 (interrupt, 0, 1)
[ 0.969630] Freeing unused kernel memory: 980K (ffff88000150b000 - ffff880001600000)
[ 0.970570] Freeing unused kernel memory: 320K (ffff8800017b0000 - ffff880001800000)
[ 0.976683] i8042: [14] fa <- i8042 (interrupt, 0, 1)
[ 0.978343] i8042: [15] ab <- i8042 (interrupt, 0, 1)
[ 0.978930] systemd-udevd[57]: starting version 208
[ 0.980041] i8042: [15] 41 <- i8042 (interrupt, 0, 1)
[ 0.980057] i8042: [15] f5 -> i8042 (kbd-data)
[ 0.981681] i8042: [16] 23 <- i8042 (interrupt, 0, 1)
[ 0.982631] [drm] Initialized drm 1.1.0 20060810
[ 0.983985] wmi: Mapper loaded
[ 0.984709] i8042: [17] fa <- i8042 (interrupt, 0, 1)
[ 0.984736] i8042: [17] ed -> i8042 (kbd-data)
[ 0.984739] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 0.986132] i8042: [17] 23 <- i8042 (interrupt, 0, 1)
[ 0.989692] i8042: [18] fa <- i8042 (interrupt, 0, 1)
[ 0.989721] i8042: [18] 00 -> i8042 (kbd-data)
[ 0.994055] i8042: [19] fa <- i8042 (interrupt, 0, 1)
[ 0.994079] i8042: [19] f3 -> i8042 (kbd-data)
[ 1.000465] i8042: [21] fa <- i8042 (interrupt, 0, 1)
[ 1.000485] i8042: [21] 00 -> i8042 (kbd-data)
[ 1.006166] i8042: [23] fa <- i8042 (interrupt, 0, 1)
[ 1.006204] i8042: [23] f4 -> i8042 (kbd-data)
[ 1.012989] i8042: [25] fa <- i8042 (interrupt, 0, 1)
[ 1.013139] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.020504] i8042: [27] 23 <- i8042 (interrupt, 0, 1)
[ 1.026812] acpi device:0b: registered as cooling_device0
[ 1.026938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input2
[ 1.028000] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0C:00/input/input3
[ 1.028005] ACPI: Power Button [PWRB]
[ 1.028046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0E:00/input/input4
[ 1.028049] ACPI: Sleep Button [SLPB]
[ 1.028109] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0D:00/input/input5
[ 1.028143] ACPI: Lid Switch [LID0]
[ 1.028204] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 1.028207] ACPI: Power Button [PWRF]
[ 1.032472] checking generic (91000000 130000) vs hw (80000000 10000000)
[ 1.032476] checking generic (91000000 130000) vs hw (90000000 2000000)
[ 1.032477] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 1.032495] Console: switching to colour dummy device 80x25
[ 1.033206] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a5a00a2
[ 1.033210] nouveau [ DEVICE][0000:01:00.0] Chipset: GT216 (NVA5)
[ 1.033212] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 1.034746] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 1.090203] i8042: [48] a3 <- i8042 (interrupt, 0, 1)
[ 1.164871] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 1.164874] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 1.165013] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 1.165016] nouveau [ VBIOS][0000:01:00.0] version 70.16.1c.00.21
[ 1.186752] nouveau 0000:01:00.0: irq 41 for MSI/MSI-X
[ 1.186768] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 1.186808] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 1.186810] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 1.186812] nouveau [ PFB][0000:01:00.0] ZCOMP: 1920 tags
[ 1.193268] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 1.216778] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 1.216786] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 1.216793] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 1.216865] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 1.216868] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[ 1.216872] nouveau [ CLK][0000:01:00.0] 0f: core 550 MHz shader 1210 MHz memory 790 MHz
[ 1.216915] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[ 1.217077] [TTM] Zone kernel: Available graphics memory: 989576 kiB
[ 1.217079] [TTM] Initializing pool allocator
[ 1.217088] [TTM] Initializing DMA pool allocator
[ 1.217100] nouveau [ DRM] VRAM: 1024 MiB
[ 1.217102] nouveau [ DRM] GART: 1048576 MiB
[ 1.217105] nouveau [ DRM] TMDS table version 2.0
[ 1.217107] nouveau [ DRM] DCB version 4.0
[ 1.217110] nouveau [ DRM] DCB outp 00: 01010323 00010034
[ 1.217112] nouveau [ DRM] DCB outp 01: 02001300 00000000
[ 1.217114] nouveau [ DRM] DCB outp 02: 02022362 00020010
[ 1.217115] nouveau [ DRM] DCB conn 00: 00000040
[ 1.217117] nouveau [ DRM] DCB conn 01: 00000100
[ 1.217119] nouveau [ DRM] DCB conn 02: 00002261
[ 1.262069] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.262071] [drm] No driver support for vblank timestamp query.
[ 1.262074] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 1.312004] nouveau [ DRM] MM: using COPY for buffer copies
[ 1.378061] nouveau [ DRM] allocated 1366x768 fb: 0x70000, bo ffff880076b12400
[ 1.378412] fbcon: nouveaufb (fb0) is primary device
[ 1.830558] tsc: Refined TSC clocksource calibration: 2128.004 MHz
[ 2.720296] Console: switching to colour frame buffer device 170x48
[ 2.720896] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.720898] nouveau 0000:01:00.0: registered panic notifier
[ 2.720904] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 2.781027] SCSI subsystem initialized
[ 2.785979] ACPI: bus type USB registered
[ 2.786039] usbcore: registered new interface driver usbfs
[ 2.786061] usbcore: registered new interface driver hub
[ 2.786522] usbcore: registered new device driver usb
[ 2.787074] libata version 3.00 loaded.
[ 2.788578] ahci 0000:00:1f.2: version 3.0
[ 2.788891] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 2.788948] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.789000] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[ 2.789007] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 2.789274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.789510] ehci-pci: EHCI PCI platform driver
[ 2.803104] scsi0 : ahci
[ 2.803592] scsi1 : ahci
[ 2.803715] scsi2 : ahci
[ 2.804500] scsi3 : ahci
[ 2.805114] scsi4 : ahci
[ 2.805363] ata1: SATA max UDMA/133 abar m2048@0x99105000 port 0x99105100 irq 42
[ 2.805422] ata2: SATA max UDMA/133 abar m2048@0x99105000 port 0x99105180 irq 42
[ 2.805425] ata3: DUMMY
[ 2.805427] ata4: DUMMY
[ 2.805432] ata5: SATA max UDMA/133 abar m2048@0x99105000 port 0x99105300 irq 42
[ 2.805663] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.805676] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.805696] ehci-pci 0000:00:1a.0: debug port 2
[ 2.809687] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.809710] ehci-pci 0000:00:1a.0: irq 16, io mem 0x99105c00
[ 2.816769] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.816979] hub 1-0:1.0: USB hub found
[ 2.816988] hub 1-0:1.0: 3 ports detected
[ 2.817239] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.817246] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.817260] ehci-pci 0000:00:1d.0: debug port 2
[ 2.821197] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.821219] ehci-pci 0000:00:1d.0: irq 23, io mem 0x99105800
[ 2.830120] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.830223] Switched to clocksource tsc
[ 2.830611] hub 2-0:1.0: USB hub found
[ 2.830632] hub 2-0:1.0: 3 ports detected
[ 3.123413] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.126695] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.127390] ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133
[ 3.127398] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.128201] ata1.00: configured for UDMA/133
[ 3.128425] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5
[ 3.247461] hub 1-1:1.0: USB hub found
[ 3.247625] hub 1-1:1.0: 6 ports detected
[ 3.353282] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.446596] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.459677] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, F820, max UDMA/100
[ 3.474591] ata2.00: configured for UDMA/100
[ 3.477642] hub 2-1:1.0: USB hub found
[ 3.477746] hub 2-1:1.0: 8 ports detected
[ 3.477899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S F820 PQ: 0 ANSI: 5
[ 3.546651] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 3.743314] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 3.796436] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.800088] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 3.800206] sd 0:0:0:0: [sda] Write Protect is off
[ 3.800215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.800282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.803451] sda: sda1 sda2 sda3
[ 3.804130] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.804470] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.804474] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.804735] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.195399] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.270424] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 4.271582] systemd[1]: Set hostname to <o2pc>.
[ 4.274329] random: systemd urandom read with 72 bits of entropy available
[ 4.341107] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.341540] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.341661] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.341689] systemd[1]: Starting Remote File Systems.
[ 4.341713] systemd[1]: Reached target Remote File Systems.
[ 4.341732] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.341791] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.341810] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.341863] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.341882] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.341918] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.341936] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.341976] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.342035] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.342219] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.342248] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.342315] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.342334] systemd[1]: Starting Paths.
[ 4.342355] systemd[1]: Reached target Paths.
[ 4.342372] systemd[1]: Starting Encrypted Volumes.
[ 4.342391] systemd[1]: Reached target Encrypted Volumes.
[ 4.342414] systemd[1]: Starting udev Kernel Socket.
[ 4.342454] systemd[1]: Listening on udev Kernel Socket.
[ 4.342476] systemd[1]: Starting udev Control Socket.
[ 4.342518] systemd[1]: Listening on udev Control Socket.
[ 4.342540] systemd[1]: Starting Journal Socket.
[ 4.342625] systemd[1]: Listening on Journal Socket.
[ 4.342666] systemd[1]: Mounting Huge Pages File System...
[ 4.344185] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.344231] systemd[1]: Starting udev Coldplug all Devices...
[ 4.344940] systemd[1]: Mounting Debug File System...
[ 4.346524] systemd[1]: Starting Apply Kernel Variables...
[ 4.347091] systemd[1]: Starting Setup Virtual Console...
[ 4.353930] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.354487] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.357367] systemd[1]: Starting Load Kernel Modules...
[ 4.357702] systemd[1]: Starting Journal Service...
[ 4.358782] systemd[1]: Started Journal Service.
[ 4.371482] EXT4-fs (sda2): re-mounted. Opts: discard
[ 4.375670] i2c /dev entries driver
[ 4.376362] systemd-journald[132]: Vacuuming done, freed 0 bytes
[ 4.400629] ACPI Warning: 0x0000000000005000-0x000000000000501f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 4.400637] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.429366] systemd-udevd[157]: starting version 208
[ 4.434254] systemd-journald[132]: Received request to flush runtime journal from PID 1
[ 4.527006] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.533311] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
[ 4.533313] ene_ir: PLL freq = 1000
[ 4.533315] ene_ir: KB3926D or higher detected
[ 4.533330] ene_ir: Firmware regs: cc 00
[ 4.533331] ene_ir: Hardware features:
[ 4.533332] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 4.533333] ene_ir: * Uses new style input buffer
[ 4.533381] ene_ir: Hardware uses 2 extended buffers:
[ 4.533382] ene_ir: 0xfa48 - len : 15
[ 4.533384] ene_ir: 0xfa00 - len : 17
[ 4.533385] ene_ir: Total buffer len = 40
[ 4.538176] ACPI: AC Adapter [ACAD] (on-line)
[ 4.555652] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 4.557643] ACPI : EC: GPE storm detected(9 GPEs), transactions will use polling mode
[ 4.559700] Registered IR keymap rc-rc6-mce
[ 4.560655] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input7
[ 4.560923] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 4.566518] IR RC6 protocol handler initialized
[ 4.566814] IR RC5(x) protocol handler initialized
[ 4.567212] IR JVC protocol handler initialized
[ 4.569200] IR NEC protocol handler initialized
[ 4.570794] pps_core: LinuxPPS API ver. 1 registered
[ 4.570798] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.571733] IR MCE Keyboard/mouse protocol handler initialized
[ 4.571838] IR SANYO protocol handler initialized
[ 4.571976] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input8
[ 4.572324] PTP clock support registered
[ 4.573220] ene_ir: driver has been successfully loaded
[ 4.574320] IR Sony protocol handler initialized
[ 4.576848] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 4.578547] lirc_dev: IR Remote Control driver registered, major 249
[ 4.580568] tg3.c:v3.134 (Sep 16, 2013)
[ 4.582159] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 4.582166] IR LIRC bridge handler initialized
[ 4.587881] cfg80211: Calling CRDA to update world regulatory domain
[ 4.589851] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.590134] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.593140] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 4.593148] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.593154] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.593158] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.593160] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.593165] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.593167] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.593171] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.593173] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.593242] libphy: tg3 mdio bus: probed
[ 4.593957] hda_intel: Disabling MSI
[ 4.593964] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 4.603384] tg3 0000:07:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 70:5a:b6:5f:4c:c4
[ 4.603388] tg3 0000:07:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=700:01)
[ 4.603391] tg3 0000:07:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.603393] tg3 0000:07:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.618176] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 4.624032] platform microcode: Direct firmware load failed with error -2
[ 4.624038] platform microcode: Falling back to user helper
[ 4.631780] ideapad_slidebar: Laptop model 'Lenovo IdeaPad Y550P'
[ 4.672633] Adding 4190204k swap on /dev/sda3. Priority:-1 extents:1 across:4190204k SSFS
[ 4.696164] ACPI: Invalid active0 threshold
[ 4.701631] ath: phy0: Enable LNA combining
[ 4.704418] ath: phy0: ASPM enabled: 0x43
[ 4.704422] ath: EEPROM regdomain: 0x6a
[ 4.704424] ath: EEPROM indicates we should expect a direct regpair map
[ 4.704427] ath: Country alpha2 being used: 00
[ 4.704428] ath: Regpair used: 0x6a
[ 4.709441] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input12
[ 4.716028] random: nonblocking pool is initialized
[ 4.717198] Bluetooth: Core ver 2.17
[ 4.717218] NET: Registered protocol family 31
[ 4.717220] Bluetooth: HCI device and connection manager initialized
[ 4.717231] Bluetooth: HCI socket layer initialized
[ 4.717234] Bluetooth: L2CAP socket layer initialized
[ 4.717240] Bluetooth: SCO socket layer initialized
[ 4.719068] usbcore: registered new interface driver btusb
[ 4.719106] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.719425] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90015200000, irq=17
[ 4.727739] media: Linux media interface: v0.10
[ 4.731785] Linux video capture interface: v2.00
[ 4.740364] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (090c:7371)
[ 4.796054] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.796059] ACPI: Thermal Zone [TZ00] (51 C)
[ 4.801246] iTCO_vendor_support: vendor-support=0
[ 4.803147] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 4.803165] platform microcode: Direct firmware load failed with error -2
[ 4.803168] platform microcode: Falling back to user helper
[ 4.803903] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.804016] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 4.804188] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.816117] systemd-udevd[171]: renamed network interface eth0 to enp7s0
[ 4.827947] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 4.827967] platform microcode: Direct firmware load failed with error -2
[ 4.827969] platform microcode: Falling back to user helper
[ 4.832522] systemd-udevd[174]: renamed network interface wlan0 to wlp6s0
[ 4.833834] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 4.833865] platform microcode: Direct firmware load failed with error -2
[ 4.833871] platform microcode: Falling back to user helper
[ 4.836900] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.859130] kvm: disabled by bios
[ 4.919434] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input13
[ 4.919720] usbcore: registered new interface driver uvcvideo
[ 4.919725] USB Video Class driver (1.1.1)
[ 5.269471] ACPI: Battery Slot [BAT1] (battery present)
[ 5.275917] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 5.276022] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 5.276113] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 5.276200] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 5.336683] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 5.339221] tg3 0000:07:00.0: irq 44 for MSI/MSI-X
[ 5.360249] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[ 5.405775] i8042: [1344] a8 -> i8042 (command)
[ 5.405928] input: PC Speaker as /devices/platform/pcspkr/input/input18
[ 5.406262] input: IdeaPad Slidebar as /devices/platform/ideapad_slidebar/input/input19
[ 5.603395] tg3 0000:07:00.0 enp7s0: Link is down
On 12/07/2013 08:02 PM, Dmitry Torokhov wrote:
> On Sat, Dec 07, 2013 at 05:47:09PM +0400, Andrey Moiseev wrote:
>> I inserted a printk into ps2_handle_response(struct ps2dev *ps2dev,
>> unsigned char data) in "drivers/input/serio/libps2.c" and other
>> functions in the file.
>> It really eats scancodes from the keyboard, as I see (0x23 is the 'H'
>> press scancode). Seems like the scancodes are mixed with reasonable
>> values. Is it a bug in the controller?
>
> Not necessarily... Can you boot with i8042.debug=1 and post full dmesg?
>
> Thanks.
>
^ permalink raw reply
* Re: [PATCH] input synaptics-rmi4: elliminate multiple sensor support from rmi_f11.c
From: Dmitry Torokhov @ 2013-12-07 16:05 UTC (permalink / raw)
To: Andrew Duggan
Cc: Linux Input, Christopher Heiny, Vincent Huang, Vivian Ly,
Daniel Rosenberg, Jean Delvare, Joerie de Gram, Linus Walleij,
Benjamin Tissoires
In-Reply-To: <1386295167-866-1-git-send-email-aduggan@synaptics.com>
Hi Andrew,
On Thu, Dec 05, 2013 at 05:59:27PM -0800, Andrew Duggan wrote:
> This patch implements changes to the synaptics-rmi4 branch of
> Dmitry's input tree. The base for the patch is commit
> 8ca01dc61a42b6f7bcba052a8c084000f7057a34.
>
> This patch elliminates support for multiple sensors in rmi_f11. This feature
> has been removed from the RMI4 spec and no devices have every used multiple
> F11 sensors on a single device.
>
> Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
I am a bit confused here - has this been coordinated with recent
submission by Chris? I'd prefer if there was a single person from
Synaptics posting patches at the same time, so that I know they are
properly sequenced.
Thanks!
--
Dmitry
^ permalink raw reply
* Re: synaptics: PS/2 touchpad isn't detected if a keyboard key is held down on boot
From: Dmitry Torokhov @ 2013-12-07 16:02 UTC (permalink / raw)
To: Andrey Moiseev; +Cc: linux-input, linux-kernel, linux-hotplug
In-Reply-To: <CABWXVkNXzxrZJiYshhsWFRf4fDgUL3=tmFtv23w=sZtZM7Rxgg@mail.gmail.com>
On Sat, Dec 07, 2013 at 05:47:09PM +0400, Andrey Moiseev wrote:
> I inserted a printk into ps2_handle_response(struct ps2dev *ps2dev,
> unsigned char data) in "drivers/input/serio/libps2.c" and other
> functions in the file.
> It really eats scancodes from the keyboard, as I see (0x23 is the 'H'
> press scancode). Seems like the scancodes are mixed with reasonable
> values. Is it a bug in the controller?
Not necessarily... Can you boot with i8042.debug=1 and post full dmesg?
Thanks.
--
Dmitry
^ permalink raw reply
* [PATCH] Input: serio - fix sysfs layout
From: Dmitry Torokhov @ 2013-12-07 15:41 UTC (permalink / raw)
To: linux-input; +Cc: Greg Kroah-Hartman, Thomas Hellstrom, linux-kernel
Restore previous layout of sysfs attributes that was broken by commit
3778a2129bcce84f684cc0017ed20d2524afd289 (input: serio: remove bus usage of
dev_attrs) which moved all serio device attributes into 'id' group, when
only 'type', 'proto', 'id', and 'extra' should be in 'id' group and the
rest of attributes should be attached directly to the device.
Reported-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
drivers/input/serio/serio.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 98707fb..8f4c4ab 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -455,16 +455,26 @@ static DEVICE_ATTR_RO(type);
static DEVICE_ATTR_RO(proto);
static DEVICE_ATTR_RO(id);
static DEVICE_ATTR_RO(extra);
-static DEVICE_ATTR_RO(modalias);
-static DEVICE_ATTR_WO(drvctl);
-static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL);
-static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode);
static struct attribute *serio_device_id_attrs[] = {
&dev_attr_type.attr,
&dev_attr_proto.attr,
&dev_attr_id.attr,
&dev_attr_extra.attr,
+ NULL
+};
+
+static struct attribute_group serio_id_attr_group = {
+ .name = "id",
+ .attrs = serio_device_id_attrs,
+};
+
+static DEVICE_ATTR_RO(modalias);
+static DEVICE_ATTR_WO(drvctl);
+static DEVICE_ATTR(description, S_IRUGO, serio_show_description, NULL);
+static DEVICE_ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode);
+
+static struct attribute *serio_device_attrs[] = {
&dev_attr_modalias.attr,
&dev_attr_description.attr,
&dev_attr_drvctl.attr,
@@ -472,13 +482,13 @@ static struct attribute *serio_device_id_attrs[] = {
NULL
};
-static struct attribute_group serio_id_attr_group = {
- .name = "id",
- .attrs = serio_device_id_attrs,
+static struct attribute_group serio_device_attr_group = {
+ .attrs = serio_device_attrs,
};
static const struct attribute_group *serio_device_attr_groups[] = {
&serio_id_attr_group,
+ &serio_device_attr_group,
NULL
};
--
1.8.3.1
--
Dmitry
^ permalink raw reply related
* Re: synaptics: PS/2 touchpad isn't detected if a keyboard key is held down on boot
From: Andrey Moiseev @ 2013-12-07 13:47 UTC (permalink / raw)
To: linux-input, linux-kernel, Dmitry Torokhov, linux-hotplug
In-Reply-To: <CABWXVkMUFdRKNm76Vc3oJ+Ef9M_MS1xU2TKh=rdyv-t9Cq5V1w@mail.gmail.com>
I inserted a printk into ps2_handle_response(struct ps2dev *ps2dev,
unsigned char data) in "drivers/input/serio/libps2.c" and other
functions in the file.
It really eats scancodes from the keyboard, as I see (0x23 is the 'H'
press scancode). Seems like the scancodes are mixed with reasonable
values. Is it a bug in the controller? Got all this on Lenovo Ideapad
Y550P notebook with Synaptics PS/2 touchpad.
PS2 init
PS2 begin command
PS2 command
PS2 send byte
PS2 end command
PS2 begin command
PS2 command
PS2 send byte
PS2 end command
PS2 init
PS2 begin command
PS2 command
PS2 send byte
PS2 handle ack 0xfa
PS2 handle responce 0x23
PS2 adjust timeout
PS2 end command
PS2 init
PS2 begin command
PS2 command
PS2 send byte
PS2 handle ack 0xfa
PS2 handle responce 0xab
PS2 adjust timeout
PS2 handle responce 0x41
PS2 end command
PS2 begin command
PS2 command
PS2 send byte
PS2 handle ack 0xfa
PS2 end command
PS2 begin command
PS2 command
PS2 send byte
PS2 handle ack 0x23
PS2 handle ack 0xfa
PS2 send byte
PS2 handle ack 0xfa
PS2 end command
PS2 begin command
PS2 command
PS2 send byte
PS2 handle ack 0xfa
PS2 send byte
PS2 handle ack 0xfa
PS2 end command
PS2 begin command
PS2 command
PS2 send byte
PS2 handle ack 0xfa
PS2 end command
On Sat, Dec 7, 2013 at 3:01 PM, Andrey Moiseev <o2g.org.ru@gmail.com> wrote:
> psmouse module is not loaded when I hold down a key on boot (when
> GRUB2 says "loading vmlinuz"), and, in its turn, the PS/2 touchpad
> doesn't work. Latest mainline kernel, latest stable one and probably
> many older ones. I guess i8042's buffer gets full and that confuses
> drivers somehow.
>
> On Fri, Dec 6, 2013 at 9:22 PM, Andrey Moiseev <o2g.org.ru@gmail.com> wrote:
>> This is an ancient bug, I noticed it since I bought my notebook.
>> Synaptics PS/2 touchpad is not detected and is not shown in
>> /dev/input/event* if I hold a keyboard key down when booting just
>> started.
^ permalink raw reply
* Re: synaptics: PS/2 touchpad isn't detected if a keyboard key is held down on boot
From: Andrey Moiseev @ 2013-12-07 11:01 UTC (permalink / raw)
To: linux-input, linux-kernel, Dmitry Torokhov, linux-hotplug
In-Reply-To: <CABWXVkMdyDNxG3QFOvyx4=6EiJQ5ik9aJxa7jQvtO+UJKwc8Fw@mail.gmail.com>
psmouse module is not loaded when I hold down a key on boot (when
GRUB2 says "loading vmlinuz"), and, in its turn, the PS/2 touchpad
doesn't work. Latest mainline kernel, latest stable one and probably
many older ones. I guess i8042's buffer gets full and that confuses
drivers somehow.
On Fri, Dec 6, 2013 at 9:22 PM, Andrey Moiseev <o2g.org.ru@gmail.com> wrote:
> This is an ancient bug, I noticed it since I bought my notebook.
> Synaptics PS/2 touchpad is not detected and is not shown in
> /dev/input/event* if I hold a keyboard key down when booting just
> started.
^ permalink raw reply
* ADXL34X orientation definition
From: Dmitry Torokhov @ 2013-12-07 9:53 UTC (permalink / raw)
To: Michael Hennerich; +Cc: linux-input
Hi Michael,
I was going though Coverity reports and it looks like definition of
#define ADXL346_2D_ORIENT(x) (((x) & 0x3) >> 4)
is not correct as it will always evaluate to 0. Should the mask be 0x30
instead?
Thanks.
--
Dmitry
^ permalink raw reply
* [git pull] Input updates for 3.13-rc3
From: Dmitry Torokhov @ 2013-12-07 9:37 UTC (permalink / raw)
To: Linus Torvalds; +Cc: linux-kernel, linux-input
[-- Attachment #1: Type: text/plain, Size: 1851 bytes --]
Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git for-linus
or
master.kernel.org:/pub/scm/linux/kernel/git/dtor/input.git for-linus
to receive updates for the input subsystem. You will get an update to
ALPS to support devices on Dell XT2 (hopefully working better this time
around and although it is largish it should not affect any other ALPS
devices) and a tiny update to Elantech driver to support newer devices
as well. Also a coupe of new input event codes have been defined.
Changelog:
---------
Andrew Liu (1):
Input: keyboard - "keycode & KEY_MAX" changes some keycode values
Christian Engelmayer (1):
Input: usbtouchscreen - separate report and transmit buffer size handling
Dmitry Torokhov (1):
Input: sur40 - suppress false uninitialized variable warning
Matt Walker (1):
Input: elantech - add support for newer (August 2013) devices
Pali Rohár (1):
Input: add key code for ambient light sensor button
Ping Cheng (1):
Input: add SW_MUTE_DEVICE switch definition
Yunkang Tang (1):
Input: ALPS - add support for DualPoint device on Dell XT2 model
Diffstat:
--------
drivers/input/keyboard/adp5588-keys.c | 3 +-
drivers/input/keyboard/adp5589-keys.c | 3 +-
drivers/input/keyboard/bf54x-keys.c | 3 +-
drivers/input/misc/pcf8574_keypad.c | 7 +-
drivers/input/mouse/alps.c | 206 ++++++++++++++++++++++++++++-
drivers/input/mouse/alps.h | 1 +
drivers/input/mouse/elantech.c | 1 +
drivers/input/touchscreen/sur40.c | 4 +-
drivers/input/touchscreen/usbtouchscreen.c | 22 ++-
include/uapi/linux/input.h | 3 +
10 files changed, 239 insertions(+), 14 deletions(-)
--
Dmitry
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* synaptics: PS/2 touchpad isn't detected if a keyboard key is held down on boot
From: Andrey Moiseev @ 2013-12-06 17:22 UTC (permalink / raw)
To: linux-input, linux-kernel, Dmitry Torokhov
This is an ancient bug, I noticed it since I bought my notebook.
Synaptics PS/2 touchpad is not detected and is not shown in
/dev/input/event* if I hold a keyboard key down when booting just
started.
^ permalink raw reply
* Re: [PATCH 3.4-stable][CVE] HID: picolcd_core: validate output report details
From: Kees Cook @ 2013-12-06 16:44 UTC (permalink / raw)
To: Kefeng Wang
Cc: Jiri Kosina, Greg Kroah-Hartman, # 3.4.x, linux-input, guohanjun
In-Reply-To: <1386323162-7676-1-git-send-email-wangkefeng.wang@huawei.com>
On Fri, Dec 6, 2013 at 1:46 AM, Kefeng Wang <wangkefeng.wang@huawei.com> wrote:
> Hi Kees, Jiri or Greg,
>
> This patch has been backported to 3.2 stable tree.
> It is a CVE bugfix, and looks applicable to stable-3.4.
> It prevents from triggering a NULL dereference during
> atrr file writing if a HID device send a malicious output
> report.
>
> NOTE:
> Rename file drivers/hid/hid-picolcd_core.c
> -> drivers/hid/hid-picolcd.c.
Ah! Good call, yes. This should be applied to stable-3.4. Thanks for
fixing it up!
-Kees
--
Kees Cook
Chrome OS Security
^ permalink raw reply
* Re: [PATCH] i8042: bugfix for controller detection failure
From: Dmitry Torokhov @ 2013-12-06 16:14 UTC (permalink / raw)
To: Pablo; +Cc: linux-input
In-Reply-To: <afgut4ql5ujewc30qasvonpu.1386341346081@email.android.com>
Hi Pablo,
On Fri, Dec 06, 2013 at 10:49:06PM +0800, Pablo wrote:
> Subject: [PATCH] i8042: bugfix for controller detection failure
> From: Zhong Jun <puretaurs@163.com>
> To: Dmitry Torokhov <dmitry.torokhov@gmail.com>, Dmitry Torokhov <dtor@mail.ru>, linux-input@vger.kernel.org
>
> if i8042 internal buffer is completely filled before i8042
> initialization starting, function i8042_controller_check will fail because
> i8042_flush returns I8042_BUFFER_SIZE although i8042 internal buffer is
> completely cleared and I8042_STR_OBF bit of i8042 status register is cleared.
> To reproduce this bug, holding any key down while the kernel booting from
> scratch. After system is up, no i8042 entry in /sys/bus/platform/devices directory and
> key press is not responded.
I believe this problem shoudl be fixed by commit
2f0d2604134880f739642fd7c3ae55db33c838e7
Thanks.
>
> Signed-off-by: Zhong Jun <zhongjun@zte.com.cn>
> Tested-by: Zhong Jun <zhongjun@zte.com.cn>
> Reviewed-by: Wu Dongling <wudongling@zte.com.cn>
> Reviewed-by: Jiang Biao jiang.biao2@zte.com.cn
>
> diff -up linux-2.6.32.61/drivers/input/serio/i8042.c.orig linux-2.6.32.61/drivers/input/serio/i8042.c
> --- linux-2.6.32.61/drivers/input/serio/i8042.c.orig 2013-11-29 16:42:37.788834724 +0800
> +++ linux-2.6.32.61/drivers/input/serio/i8042.c 2013-11-29 16:46:42.371877282 +0800
> @@ -194,7 +194,7 @@ static int i8042_flush(void)
>
> spin_unlock_irqrestore(&i8042_lock, flags);
>
> - return i;
> + return i + (str & I8042_STR_OBF);
> }
>
> /*
> @@ -781,7 +781,7 @@ static int __init i8042_check_aux(void)
>
> static int i8042_controller_check(void)
> {
> - if (i8042_flush() == I8042_BUFFER_SIZE) {
> + if (i8042_flush() > I8042_BUFFER_SIZE) {
> printk(KERN_ERR "i8042.c: No controller found.\n");
> return -ENODEV;
> }
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH] Input: samsung-keypad - favor platform data if present
From: Joonyoung Shim @ 2013-12-06 10:33 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: linux-input, Sachin Kamat, Jingoo Han, Thomas Abraham,
linux-kernel
In-Reply-To: <20131206100215.GA27763@core.coreip.homeip.net>
Hi,
On 12/06/2013 07:02 PM, Dmitry Torokhov wrote:
> We should be able to override firmware-provided parameters with in-kernel
> data, if needed. To that effect favor platform data, if present, over
> devicetree data.
>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
> drivers/input/keyboard/samsung-keypad.c | 36 +++++++++++++++++++--------------
> 1 file changed, 21 insertions(+), 15 deletions(-)
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Thanks.
^ permalink raw reply
* [PATCH] Input: samsung-keypad - favor platform data if present
From: Dmitry Torokhov @ 2013-12-06 10:02 UTC (permalink / raw)
To: linux-input
Cc: Sachin Kamat, Jingoo Han, Thomas Abraham, Joonyoung Shim,
linux-kernel
We should be able to override firmware-provided parameters with in-kernel
data, if needed. To that effect favor platform data, if present, over
devicetree data.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/keyboard/samsung-keypad.c | 36 +++++++++++++++++++--------------
1 file changed, 21 insertions(+), 15 deletions(-)
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 9ac8a1e..a7357ad 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -244,8 +244,8 @@ static void samsung_keypad_close(struct input_dev *input_dev)
}
#ifdef CONFIG_OF
-static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
- struct device *dev)
+static struct samsung_keypad_platdata *
+samsung_keypad_parse_dt(struct device *dev)
{
struct samsung_keypad_platdata *pdata;
struct matrix_keymap_data *keymap_data;
@@ -253,17 +253,22 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
struct device_node *np = dev->of_node, *key_np;
unsigned int key_count;
+ if (!np) {
+ dev_err(dev, "missing device tree data\n");
+ return ERR_PTR(-EINVAL);
+ }
+
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(dev, "could not allocate memory for platform data\n");
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows);
of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols);
if (!num_rows || !num_cols) {
dev_err(dev, "number of keypad rows/columns not specified\n");
- return NULL;
+ return ERR_PTR(-EINVAL);
}
pdata->rows = num_rows;
pdata->cols = num_cols;
@@ -271,7 +276,7 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL);
if (!keymap_data) {
dev_err(dev, "could not allocate memory for keymap data\n");
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
pdata->keymap_data = keymap_data;
@@ -280,7 +285,7 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL);
if (!keymap) {
dev_err(dev, "could not allocate memory for keymap\n");
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
keymap_data->keymap = keymap;
@@ -294,16 +299,19 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
if (of_get_property(np, "linux,input-no-autorepeat", NULL))
pdata->no_autorepeat = true;
+
if (of_get_property(np, "linux,input-wakeup", NULL))
pdata->wakeup = true;
return pdata;
}
#else
-static
-struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
+static struct samsung_keypad_platdata *
+samsung_keypad_parse_dt(struct device *dev)
{
- return NULL;
+ dev_err(dev, "no platform data defined\n");
+
+ return ERR_PTR(-EINVAL);
}
#endif
@@ -318,13 +326,11 @@ static int samsung_keypad_probe(struct platform_device *pdev)
unsigned int keymap_size;
int error;
- if (pdev->dev.of_node)
- pdata = samsung_keypad_parse_dt(&pdev->dev);
- else
- pdata = dev_get_platdata(&pdev->dev);
+ pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -EINVAL;
+ pdata = samsung_keypad_parse_dt(&pdev->dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
}
keymap_data = pdata->keymap_data;
--
1.8.3.1
--
Dmitry
^ permalink raw reply related
* Re: [PATCH v2] input: don't call input_dev_release_keys() in resume
From: Oskar Andero @ 2013-12-06 9:56 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
Julian Shandorov, Makarov, Aleksej
In-Reply-To: <20131126021415.GB31517@core.coreip.homeip.net>
Hi Dmitry,
On 03:14 Tue 26 Nov , Dmitry Torokhov wrote:
> Hi Oskar,
>
> On Fri, Nov 22, 2013 at 02:27:04PM +0100, Oskar Andero wrote:
> > From: Aleksej Makarov <aleksej.makarov@sonymobile.com>
> >
> > When waking up the platform by pressing a specific key, sending a
> > release on that key makes it impossible to react on the event in
> > user-space. This is fixed by moving the input_reset_device() call to
> > resume instead.
> >
> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > Reviewed-by: Radovan Lekanovic <radovan.lekanovic@sonymobile.com>
> > Signed-off-by: Aleksej Makarov <aleksej.makarov@sonymobile.com>
> > Signed-off-by: Oskar Andero <oskar.andero@sonymobile.com>
> > ---
> > drivers/input/input.c | 11 +----------
> > 1 file changed, 1 insertion(+), 10 deletions(-)
> >
> > diff --git a/drivers/input/input.c b/drivers/input/input.c
> > index 846ccdd..511d490 100644
> > --- a/drivers/input/input.c
> > +++ b/drivers/input/input.c
> > @@ -1676,22 +1676,13 @@ static int input_dev_suspend(struct device *dev)
> > {
> > struct input_dev *input_dev = to_input_dev(dev);
> >
> > - mutex_lock(&input_dev->mutex);
> > -
> > - if (input_dev->users)
> > - input_dev_toggle(input_dev, false);
> > -
> > - mutex_unlock(&input_dev->mutex);
> > + input_reset_device(input_dev);
> >
> > return 0;
> > }
> >
> > static int input_dev_resume(struct device *dev)
> > {
> > - struct input_dev *input_dev = to_input_dev(dev);
> > -
> > - input_reset_device(input_dev);
>
> We still need to restore LED state after resume. Does the patch below
> work for you?
Finally found some time to test the patch! Not much left of the initial
one though. :)
The patch works for our use-case, i.e. wake-up the phone by pressing a
key and then be able to retrieve what key was pressed.
Please note that I haven't tested the LED/sound and hibernation parts
of the patch.
Thanks,
Oskar
>
> Input: don't call input_dev_release_keys() in resume
>
> From: Aleksej Makarov <aleksej.makarov@sonymobile.com>
>
> When waking up the platform by pressing a specific key, sending a
> release on that key makes it impossible to react on the event in
> user-space. This is fixed by moving the input_reset_device() call to
> resume instead.
>
> [dmitry.torokhov@gmail.com: make sure we still restore LED/sound state
> after resume, handle hibernation properly]
>
> Signed-off-by: Aleksej Makarov <aleksej.makarov@sonymobile.com>
> Signed-off-by: Oskar Andero <oskar.andero@sonymobile.com>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> drivers/input/input.c | 76 +++++++++++++++++++++++++++++++++++++------------
> 1 file changed, 57 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/input/input.c b/drivers/input/input.c
> index 846ccdd..692435a 100644
> --- a/drivers/input/input.c
> +++ b/drivers/input/input.c
> @@ -1653,35 +1653,36 @@ static void input_dev_toggle(struct input_dev *dev, bool activate)
> */
> void input_reset_device(struct input_dev *dev)
> {
> - mutex_lock(&dev->mutex);
> + unsigned long flags;
>
> - if (dev->users) {
> - input_dev_toggle(dev, true);
> + mutex_lock(&dev->mutex);
> + spin_lock_irqsave(&dev->event_lock, flags);
>
> - /*
> - * Keys that have been pressed at suspend time are unlikely
> - * to be still pressed when we resume.
> - */
> - spin_lock_irq(&dev->event_lock);
> - input_dev_release_keys(dev);
> - spin_unlock_irq(&dev->event_lock);
> - }
> + input_dev_toggle(dev, true);
> + input_dev_release_keys(dev);
>
> + spin_unlock_irqrestore(&dev->event_lock, flags);
> mutex_unlock(&dev->mutex);
> }
> EXPORT_SYMBOL(input_reset_device);
>
> -#ifdef CONFIG_PM
> +#ifdef CONFIG_PM_SLEEP
> static int input_dev_suspend(struct device *dev)
> {
> struct input_dev *input_dev = to_input_dev(dev);
>
> - mutex_lock(&input_dev->mutex);
> + spin_lock_irq(&input_dev->event_lock);
>
> - if (input_dev->users)
> - input_dev_toggle(input_dev, false);
> + /*
> + * Keys that are pressed now are unlikely to be
> + * still pressed when we resume.
> + */
> + input_dev_release_keys(input_dev);
>
> - mutex_unlock(&input_dev->mutex);
> + /* Turn off LEDs and sounds, if any are active. */
> + input_dev_toggle(input_dev, false);
> +
> + spin_unlock_irq(&input_dev->event_lock);
>
> return 0;
> }
> @@ -1690,7 +1691,43 @@ static int input_dev_resume(struct device *dev)
> {
> struct input_dev *input_dev = to_input_dev(dev);
>
> - input_reset_device(input_dev);
> + spin_lock_irq(&input_dev->event_lock);
> +
> + /* Restore state of LEDs and sounds, if any were active. */
> + input_dev_toggle(input_dev, true);
> +
> + spin_unlock_irq(&input_dev->event_lock);
> +
> + return 0;
> +}
> +
> +static int input_dev_freeze(struct device *dev)
> +{
> + struct input_dev *input_dev = to_input_dev(dev);
> +
> + spin_lock_irq(&input_dev->event_lock);
> +
> + /*
> + * Keys that are pressed now are unlikely to be
> + * still pressed when we resume.
> + */
> + input_dev_release_keys(input_dev);
> +
> + spin_unlock_irq(&input_dev->event_lock);
> +
> + return 0;
> +}
> +
> +static int input_dev_poweroff(struct device *dev)
> +{
> + struct input_dev *input_dev = to_input_dev(dev);
> +
> + spin_lock_irq(&input_dev->event_lock);
> +
> + /* Turn off LEDs and sounds, if any are active. */
> + input_dev_toggle(input_dev, false);
> +
> + spin_unlock_irq(&input_dev->event_lock);
>
> return 0;
> }
> @@ -1698,7 +1735,8 @@ static int input_dev_resume(struct device *dev)
> static const struct dev_pm_ops input_dev_pm_ops = {
> .suspend = input_dev_suspend,
> .resume = input_dev_resume,
> - .poweroff = input_dev_suspend,
> + .freeze = input_dev_freeze,
> + .poweroff = input_dev_poweroff,
> .restore = input_dev_resume,
> };
> #endif /* CONFIG_PM */
> @@ -1707,7 +1745,7 @@ static struct device_type input_dev_type = {
> .groups = input_dev_attr_groups,
> .release = input_dev_release,
> .uevent = input_dev_uevent,
> -#ifdef CONFIG_PM
> +#ifdef CONFIG_PM_SLEEP
> .pm = &input_dev_pm_ops,
> #endif
> };
^ permalink raw reply
* [PATCH 3.4-stable][CVE] HID: picolcd_core: validate output report details
From: Kefeng Wang @ 2013-12-06 9:46 UTC (permalink / raw)
To: Kees Cook, Jiri Kosina, Greg Kroah-Hartman
Cc: stable, linux-input, wangkefeng.wang, guohanjun
From: Kees Cook <keescook@chromium.org>
Hi Kees, Jiri or Greg,
This patch has been backported to 3.2 stable tree.
It is a CVE bugfix, and looks applicable to stable-3.4.
It prevents from triggering a NULL dereference during
atrr file writing if a HID device send a malicious output
report.
NOTE:
Rename file drivers/hid/hid-picolcd_core.c
-> drivers/hid/hid-picolcd.c.
===========
From: Kees Cook <keescook@chromium.org>
commit 1e87a2456b0227ca4ab881e19a11bb99d164e792 upstream.
A HID device could send a malicious output report that would cause the
picolcd HID driver to trigger a NULL dereference during attr file writing.
[jkosina@suse.cz: changed
report->maxfield < 1
to
report->maxfield != 1
as suggested by Bruno].
CVE-2013-2899
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@kernel.org
Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[Kefeng: backported to stable 3.4: adjust filename]
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
---
drivers/hid/hid-picolcd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c
index 45c3433..95f9047 100644
--- a/drivers/hid/hid-picolcd.c
+++ b/drivers/hid/hid-picolcd.c
@@ -1424,7 +1424,7 @@ static ssize_t picolcd_operation_mode_store(struct device *dev,
buf += 10;
cnt -= 10;
}
- if (!report)
+ if (!report || report->maxfield != 1)
return -EINVAL;
while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r'))
--
1.8.2.2
^ permalink raw reply related
* Re: [PATCH v4] Input: wacom - add SW_MUTE_DEVICE to include/uapi/linux/input.h
From: Dmitry Torokhov @ 2013-12-06 3:37 UTC (permalink / raw)
To: Ping Cheng; +Cc: linux-input, killertofu, chris, peter.hutterer, Ping Cheng
In-Reply-To: <1386100749-8827-1-git-send-email-pingc@wacom.com>
Hi Ping,
On Tue, Dec 03, 2013 at 11:59:09AM -0800, Ping Cheng wrote:
> New Intuos series models added a hardware switch to turn touch
> data on/off. The state of the switch is reported periodically
> from the tablet. To report the state, SW_MUTE_DEVICE is added
> in include/uapi/linux/input.h.
>
> Reviewed_by: Chris Bagwell <chris@cnpbagwell.com>
> Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
> Tested-by: Jason Gerecke <killertofu@gmail.com>
> Signed-off-by: Ping Cheng <pingc@wacom.com>
> ---
> v4: Changed SW_TOUCH to SW_MUTE_DEVICE as suggested by Dmitry.
I split SW_MUTE_DEVICE addition into a separate patch (want to push it
sooner rather than later) and applied both.
Thanks.
--
Dmitry
^ permalink raw reply
* Re: [PATCH] Input: use dev_get_platdata()
From: Dmitry Torokhov @ 2013-12-06 3:23 UTC (permalink / raw)
To: Jingoo Han
Cc: linux-input, 'Fugang Duan', 'Michael Hennerich',
'Wan ZongShun', 'Josh Wu', 'Ferruh Yigit'
In-Reply-To: <000e01ceeff2$8b6f62e0$a24e28a0$%han@samsung.com>
On Tue, Dec 03, 2013 at 03:40:23PM +0900, Jingoo Han wrote:
> Use the wrapper function for retrieving the platform data instead
> of accessing dev->platform_data directly. This is a cosmetic change
> to make the code simpler and enhance the readability.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> Acked-by: Fugang Duan <B38611@freescale.com>
Applied, thank you.
--
Dmitry
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox