* [PATCH v1 35/63] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc
From: Jiada Wang @ 2019-08-16 8:34 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
From: Kautuk Consul <kautuk_consul@mentor.com>
We now prefer to rely on the calculated CRC and not on the CRC stored in
the file.
The new logic is as follows:
1) stored CRC of file != calculated CRC of file, then refuse the possible
corrupted file
2) calculated CRC of file != CRC of configuration in controller, then
update configuration in controller
3) calculated CRC of file == CRC of configuration in controller, then
ignore configuration file
Signed-off-by: Kautuk Consul <kautuk_consul@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++-----------
1 file changed, 36 insertions(+), 29 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index aa913d2a0e3b..9cdb7754599c 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1898,7 +1898,7 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
int ret;
int offset;
int i;
- u32 info_crc, config_crc, calculated_crc;
+ u32 info_crc, config_crc, calculated_crc = 0;
u16 crc_start = 0;
/* Make zero terminated copy of the OBP_RAW file */
@@ -1961,30 +1961,6 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
}
cfg.raw_pos += offset;
- /*
- * The Info Block CRC is calculated over mxt_info and the object
- * table. If it does not match then we are trying to load the
- * configuration from a different chip or firmware version, so
- * the configuration CRC is invalid anyway.
- */
- if (info_crc == data->info_crc) {
- if (config_crc == 0 || data->config_crc == 0) {
- dev_info(dev, "CRC zero, attempting to apply config\n");
- } else if (config_crc == data->config_crc) {
- dev_dbg(dev, "Config CRC 0x%06X: OK\n",
- data->config_crc);
- ret = 0;
- goto release_raw;
- } else {
- dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
- data->config_crc, config_crc);
- }
- } else {
- dev_warn(dev,
- "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
- data->info_crc, info_crc);
- }
-
/* Malloc memory to store configuration */
cfg.start_ofs = MXT_OBJECT_START +
data->info->object_num * sizeof(struct mxt_object) +
@@ -2008,14 +1984,45 @@ static int mxt_update_cfg(struct mxt_data *data, const struct firmware *fw)
else
dev_warn(dev, "Could not find CRC start\n");
- if (crc_start > cfg.start_ofs) {
+ if (crc_start > cfg.start_ofs)
calculated_crc = mxt_calculate_crc(cfg.mem,
crc_start - cfg.start_ofs,
cfg.mem_size);
- if (config_crc > 0 && config_crc != calculated_crc)
- dev_warn(dev, "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
- calculated_crc, config_crc);
+ /* If the CRC stored in the file is not the same as what
+ * was calculated by mxt_calculate_crc, this means we
+ * have to refuse the config file and abort download.
+ */
+ if (config_crc != calculated_crc) {
+ dev_warn(dev,
+ "Config CRC in file inconsistent, calculated=%06X, file=%06X\n",
+ calculated_crc, config_crc);
+ ret = 0;
+ goto release_mem;
+ }
+
+ /*
+ * The Info Block CRC is calculated over mxt_info and the object
+ * table. If it does not match then we are trying to load the
+ * configuration from a different chip or firmware version, so
+ * the configuration CRC is invalid anyway.
+ */
+ if (info_crc == data->info_crc) {
+ if (config_crc == 0 || data->config_crc == 0) {
+ dev_info(dev, "CRC zero, attempting to apply config\n");
+ } else if (config_crc == data->config_crc) {
+ dev_dbg(dev, "Config CRC 0x%06X: OK\n",
+ data->config_crc);
+ ret = 0;
+ goto release_mem;
+ } else {
+ dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
+ data->config_crc, config_crc);
+ }
+ } else {
+ dev_warn(dev,
+ "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
+ data->info_crc, info_crc);
}
ret = mxt_upload_cfg_mem(data, &cfg);
--
2.19.2
^ permalink raw reply related
* [PATCH v1 34/63] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions
From: Jiada Wang @ 2019-08-16 8:34 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083451.18947-1-jiada_wang@mentor.com>
From: Kautuk Consul <kautuk_consul@mentor.com>
Revamping the code to call mxt_free_object_table and mxt_free_input_device
functions only in the following scenarios and code paths:
1) The error path of the mxt_probe() entry point
2) The mxt_remove de-init path entry point
3) All paths which definitely expect to populate the object table
like:
- the mxt_update_fw_store path which first calls
mxt_load_fw and then resorts to calling mxt_initialize itself.
- the mxt_read_info_block function which attempts to fill in the
object table itself as the main non-error part of the logic.
4) All paths in the code expected to definitely allocate and register
the input device such as:
- the mxt_update_fw_store path which first calls
mxt_load_fw and then resorts to calling mxt_initialize itself.
- the mxt_update_cfg_store function which will call
mxt_configure_objects.
Signed-off-by: Kautuk Consul <kautuk_consul@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 248d4b239bf6..aa913d2a0e3b 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3328,21 +3328,21 @@ static int mxt_configure_objects(struct mxt_data *data,
error = mxt_init_t7_power_cfg(data);
if (error) {
dev_err(dev, "Failed to initialize power cfg\n");
- goto err_free_object_table;
+ return error;
}
if (cfg) {
error = mxt_update_cfg(data, cfg);
if (error) {
dev_warn(dev, "Error %d updating config\n", error);
- goto err_free_object_table;
+ return error;
}
}
if (data->multitouch) {
error = mxt_initialize_input_device(data);
if (error)
- goto err_free_object_table;
+ return error;
} else {
dev_warn(dev, "No touch object detected\n");
}
@@ -3350,10 +3350,6 @@ static int mxt_configure_objects(struct mxt_data *data,
mxt_debug_init(data);
return 0;
-
-err_free_object_table:
- mxt_free_object_table(data);
- return error;
}
/* Configuration crc check sum is returned as hex xxxxxx */
@@ -4142,11 +4138,13 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
error = mxt_initialize(data);
if (error)
- goto err_sysfs_remove_group;
+ goto err_free_object;
return 0;
-err_sysfs_remove_group:
+err_free_object:
+ mxt_free_input_device(data);
+ mxt_free_object_table(data);
sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
return error;
}
--
2.19.2
^ permalink raw reply related
* [PATCH v1 33/63] Input: atmel_mxt_ts - eliminate data->raw_info_block
From: Jiada Wang @ 2019-08-16 8:34 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083451.18947-1-jiada_wang@mentor.com>
Dynamically allocated in mxt_read_info_block() buffer buf is assigned
both to data->info and data->raw_info_block, having both data->info
and data->raw_info_block is redundant and confusing.
This patch eliminates data->raw_info_block.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e185d10c2cac..248d4b239bf6 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -323,7 +323,6 @@ struct mxt_data {
char phys[64]; /* device physical location */
struct mxt_object *object_table;
struct mxt_info *info;
- void *raw_info_block;
unsigned int irq;
unsigned int max_x;
unsigned int max_y;
@@ -2060,9 +2059,8 @@ static void mxt_free_object_table(struct mxt_data *data)
v4l2_device_unregister(&data->dbg.v4l2);
#endif
data->object_table = NULL;
+ kfree(data->info);
data->info = NULL;
- kfree(data->raw_info_block);
- data->raw_info_block = NULL;
kfree(data->msg_buf);
data->msg_buf = NULL;
data->T5_address = 0;
@@ -2231,7 +2229,7 @@ static int mxt_read_info_block(struct mxt_data *data)
u8 *crc_ptr;
/* If info block already allocated, free it */
- if (data->raw_info_block)
+ if (data->info)
mxt_free_object_table(data);
/* Read 7-byte ID information block starting at address 0 */
@@ -2282,7 +2280,6 @@ static int mxt_read_info_block(struct mxt_data *data)
goto err_free_mem;
}
- data->raw_info_block = id_buf;
data->info = (struct mxt_info *)id_buf;
dev_info(&client->dev,
--
2.19.2
^ permalink raw reply related
* [PATCH v1 32/63] Input: atmel_mxt_ts - implement improved debug message interface
From: Jiada Wang @ 2019-08-16 8:34 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083451.18947-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 078569c13c88dcb6f8d882bfe17168587712df7d)
[gdavis: Resolve forward port conflicts due to v4.14.51 commit
960fe000b1d3 ("Input: atmel_mxt_ts - fix the firmware
update").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fixes from Dirk Behme:
- Input: atmel_mxt_ts - add missing unlock in error path
- Input: atmel_mxt_ts - add missing unlock in error path
- Input: atmel_mxt_ts - call mxt_debug_msg_remove() in error path
- Input: atmel_mxt_ts - protect debug_v2_enabled by mutex
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
[gdavis: Squash fix from Vladimir Zapolskiy:
- Input: atmel_mxt_ts - simplify debug_msg binary attribute
handling]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
---
Notes:
- Squash fixes from Dirk Behme:
+ Input: atmel_mxt_ts - add missing unlock in error path
Unlock the mutex in case the function is exited in the error case.
+ Input: atmel_mxt_ts - add missing unlock in error path
+ Input: atmel_mxt_ts - protect debug_v2_enabled by mutex
Put the modification of debug_v2_enabled into the protected section.
Same as in mxt_debug_msg_enable().
+ Input: atmel_mxt_ts - call mxt_debug_msg_remove() in error path
Add the missing mxt_debug_msg_remove() to the error path.
- Squash fix from Vladimir Zapolskiy:
+ Input: atmel_mxt_ts - simplify debug_msg binary attribute handling
The change introduces several updates, but all of them are related to
"debug_msg" binary attribute:
* removed dynamic initialization of data->debug_msg_attr
* removed mxt_debug_msg_write callback
* removed wrong check in mxt_debug_msg_remove()
* mxt_debug_msg_remove() now is not called from mxt_free_object_table()
avoiding multiple double deallocations.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 189 ++++++++++++++++++++++-
1 file changed, 187 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 05b21c9c0c04..e185d10c2cac 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -242,6 +242,8 @@ enum t100_type {
#define MXT_PIXELS_PER_MM 20
+#define DEBUG_MSG_MAX 200
+
struct mxt_info {
u8 family_id;
u8 variant_id;
@@ -337,6 +339,11 @@ struct mxt_data {
u8 t100_aux_vect;
struct bin_attribute mem_access_attr;
bool debug_enabled;
+ bool debug_v2_enabled;
+ u8 *debug_msg_data;
+ u16 debug_msg_count;
+ struct bin_attribute *debug_msg_attr;
+ struct mutex debug_msg_lock;
u8 max_reportid;
u32 config_crc;
u32 info_crc;
@@ -466,6 +473,139 @@ static void mxt_dump_message(struct mxt_data *data, u8 *message)
data->T5_msg_size, message);
}
+static void mxt_debug_msg_enable(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+
+ if (data->debug_v2_enabled)
+ return;
+
+ mutex_lock(&data->debug_msg_lock);
+
+ data->debug_msg_data = kcalloc(DEBUG_MSG_MAX,
+ data->T5_msg_size, GFP_KERNEL);
+ if (!data->debug_msg_data) {
+ mutex_unlock(&data->debug_msg_lock);
+ return;
+ }
+
+ data->debug_v2_enabled = true;
+ mutex_unlock(&data->debug_msg_lock);
+
+ dev_dbg(dev, "Enabled message output\n");
+}
+
+static void mxt_debug_msg_disable(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+
+ if (!data->debug_v2_enabled)
+ return;
+
+ mutex_lock(&data->debug_msg_lock);
+
+ data->debug_v2_enabled = false;
+
+ kfree(data->debug_msg_data);
+ data->debug_msg_data = NULL;
+ data->debug_msg_count = 0;
+ mutex_unlock(&data->debug_msg_lock);
+ dev_dbg(dev, "Disabled message output\n");
+}
+
+static void mxt_debug_msg_add(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+
+ mutex_lock(&data->debug_msg_lock);
+
+ if (!data->debug_msg_data) {
+ mutex_unlock(&data->debug_msg_lock);
+ dev_err(dev, "No buffer!\n");
+ return;
+ }
+
+ if (data->debug_msg_count < DEBUG_MSG_MAX) {
+ memcpy(data->debug_msg_data +
+ data->debug_msg_count * data->T5_msg_size,
+ msg,
+ data->T5_msg_size);
+ data->debug_msg_count++;
+ } else {
+ dev_dbg(dev, "Discarding %u messages\n", data->debug_msg_count);
+ data->debug_msg_count = 0;
+ }
+
+ mutex_unlock(&data->debug_msg_lock);
+
+ sysfs_notify(&data->client->dev.kobj, NULL, "debug_notify");
+}
+
+static ssize_t mxt_debug_msg_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf, loff_t off, size_t bytes)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct mxt_data *data = dev_get_drvdata(dev);
+ int count;
+ size_t bytes_read;
+
+ if (!data->debug_msg_data) {
+ dev_err(dev, "No buffer!\n");
+ return 0;
+ }
+
+ count = bytes / data->T5_msg_size;
+
+ if (count > DEBUG_MSG_MAX)
+ count = DEBUG_MSG_MAX;
+
+ mutex_lock(&data->debug_msg_lock);
+
+ if (count > data->debug_msg_count)
+ count = data->debug_msg_count;
+
+ bytes_read = count * data->T5_msg_size;
+
+ memcpy(buf, data->debug_msg_data, bytes_read);
+ data->debug_msg_count = 0;
+
+ mutex_unlock(&data->debug_msg_lock);
+
+ return bytes_read;
+}
+
+static struct bin_attribute debug_msg_attr = {
+ .attr = {
+ .name = "debug_msg",
+ .mode = 0444,
+ },
+ .read = mxt_debug_msg_read,
+};
+
+static int mxt_debug_msg_init(struct mxt_data *data)
+{
+ /*
+ * Binary attribute is not used in callback, removal is done by name,
+ * so it is safe to update a single struct bin_attribute entity
+ */
+ debug_msg_attr.size = data->T5_msg_size * DEBUG_MSG_MAX;
+ data->debug_msg_attr = &debug_msg_attr;
+
+ if (sysfs_create_bin_file(&data->client->dev.kobj,
+ data->debug_msg_attr) < 0) {
+ dev_err(&data->client->dev, "Failed to create %s\n",
+ debug_msg_attr.attr.name);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void mxt_debug_msg_remove(struct mxt_data *data)
+{
+ sysfs_remove_bin_file(&data->client->dev.kobj, data->debug_msg_attr);
+}
+
static int mxt_wait_for_completion(struct mxt_data *data,
struct completion *comp,
unsigned int timeout_ms)
@@ -1256,6 +1396,9 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
if (dump)
mxt_dump_message(data, message);
+ if (data->debug_v2_enabled)
+ mxt_debug_msg_add(data, message);
+
return 1;
}
@@ -2671,6 +2814,10 @@ static int mxt_initialize(struct mxt_data *data)
if (error)
return error;
+ error = mxt_debug_msg_init(data);
+ if (error)
+ goto err_free_sysfs;
+
if (data->cfg_name) {
error = request_firmware_nowait(THIS_MODULE, true,
data->cfg_name,
@@ -2680,16 +2827,18 @@ static int mxt_initialize(struct mxt_data *data)
if (error) {
dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
error);
- goto err_free_sysfs;
+ goto err_free_dbg_msg;
}
} else {
error = mxt_configure_objects(data, NULL);
if (error)
- goto err_free_sysfs;
+ goto err_free_dbg_msg;
}
return 0;
+err_free_dbg_msg:
+ mxt_debug_msg_remove(data);
err_free_sysfs:
mxt_sysfs_remove(data);
return error;
@@ -3351,6 +3500,7 @@ static int mxt_enter_bootloader(struct mxt_data *data)
return ret;
data->in_bootloader = true;
+ mxt_debug_msg_remove(data);
mxt_sysfs_remove(data);
mxt_free_input_device(data);
mxt_free_object_table(data);
@@ -3534,6 +3684,34 @@ static ssize_t mxt_debug_enable_show(struct device *dev,
return scnprintf(buf, PAGE_SIZE, "%c\n", c);
}
+static ssize_t mxt_debug_notify_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t mxt_debug_v2_enable_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ u8 i;
+ ssize_t ret;
+
+ if (kstrtou8(buf, 0, &i) == 0 && i < 2) {
+ if (i == 1)
+ mxt_debug_msg_enable(data);
+ else
+ mxt_debug_msg_disable(data);
+
+ ret = count;
+ } else {
+ dev_dbg(dev, "debug_enabled write error\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
static ssize_t mxt_debug_enable_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
@@ -3622,6 +3800,9 @@ static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);
static DEVICE_ATTR(config_crc, S_IRUGO, mxt_config_crc_show, NULL);
static DEVICE_ATTR(debug_enable, S_IWUSR | S_IRUSR, mxt_debug_enable_show,
mxt_debug_enable_store);
+static DEVICE_ATTR(debug_v2_enable, S_IWUSR | S_IRUSR, NULL,
+ mxt_debug_v2_enable_store);
+static DEVICE_ATTR(debug_notify, S_IRUGO, mxt_debug_notify_show, NULL);
static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -3630,6 +3811,8 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_update_cfg.attr,
&dev_attr_config_crc.attr,
&dev_attr_debug_enable.attr,
+ &dev_attr_debug_v2_enable.attr,
+ &dev_attr_debug_notify.attr,
NULL
};
@@ -3914,6 +4097,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
init_completion(&data->chg_completion);
init_completion(&data->reset_completion);
init_completion(&data->crc_completion);
+ mutex_init(&data->debug_msg_lock);
data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP;
@@ -3976,6 +4160,7 @@ static int mxt_remove(struct i2c_client *client)
disable_irq(data->irq);
sysfs_remove_group(&client->dev.kobj, &mxt_fw_attr_group);
+ mxt_debug_msg_remove(data);
mxt_sysfs_remove(data);
mxt_free_input_device(data);
mxt_free_object_table(data);
--
2.19.2
^ permalink raw reply related
* [PATCH v1 31/63] Input: atmel_mxt_ts - add memory access interface via sysfs
From: Jiada Wang @ 2019-08-16 8:34 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083451.18947-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Atmel maXTouch chips can be addressed via an "Object Based Protocol" which
defines how i2c registers are mapped to different functions within the
chips. This interface exposes the register map and allows user-space
utilities to inspect and alter object configuration, and to view diagnostic
data, while the device is running.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 80731e95c888d09b663ad9eeaf4163939bfe17f8)
Signed-off-by: George G. Davis <george_davis@mentor.com>
[jiada: Fix compilation warnings]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 74 ++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e317900279ed..05b21c9c0c04 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -335,6 +335,7 @@ struct mxt_data {
u8 t100_aux_ampl;
u8 t100_aux_area;
u8 t100_aux_vect;
+ struct bin_attribute mem_access_attr;
bool debug_enabled;
u8 max_reportid;
u32 config_crc;
@@ -3553,6 +3554,56 @@ static ssize_t mxt_debug_enable_store(struct device *dev,
return ret;
}
+static int mxt_check_mem_access_params(struct mxt_data *data, loff_t off,
+ size_t *count)
+{
+ if (off >= data->mem_size)
+ return -EIO;
+
+ if (off + *count > data->mem_size)
+ *count = data->mem_size - off;
+
+ if (*count > MXT_MAX_BLOCK_WRITE)
+ *count = MXT_MAX_BLOCK_WRITE;
+
+ return 0;
+}
+
+static ssize_t mxt_mem_access_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct mxt_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = mxt_check_mem_access_params(data, off, &count);
+ if (ret < 0)
+ return ret;
+
+ if (count > 0)
+ ret = __mxt_read_reg(data->client, off, count, buf);
+
+ return ret == 0 ? (ssize_t)count : ret;
+}
+
+static ssize_t mxt_mem_access_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf, loff_t off,
+ size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct mxt_data *data = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = mxt_check_mem_access_params(data, off, &count);
+ if (ret < 0)
+ return ret;
+
+ if (count > 0)
+ ret = __mxt_write_reg(data->client, off, count, buf);
+
+ return ret == 0 ? (ssize_t)count : ret;
+}
+
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
static struct attribute *mxt_fw_attrs[] = {
@@ -3598,13 +3649,36 @@ static int mxt_sysfs_init(struct mxt_data *data)
return error;
}
+ sysfs_bin_attr_init(&data->mem_access_attr);
+ data->mem_access_attr.attr.name = "mem_access";
+ data->mem_access_attr.attr.mode = S_IRUGO | S_IWUSR;
+ data->mem_access_attr.read = mxt_mem_access_read;
+ data->mem_access_attr.write = mxt_mem_access_write;
+ data->mem_access_attr.size = data->mem_size;
+
+ error = sysfs_create_bin_file(&client->dev.kobj,
+ &data->mem_access_attr);
+ if (error) {
+ dev_err(&client->dev, "Failed to create %s\n",
+ data->mem_access_attr.attr.name);
+ goto err_remove_sysfs_group;
+ }
+
return 0;
+
+err_remove_sysfs_group:
+ sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
+ return error;
}
static void mxt_sysfs_remove(struct mxt_data *data)
{
struct i2c_client *client = data->client;
+ if (data->mem_access_attr.attr.name)
+ sysfs_remove_bin_file(&client->dev.kobj,
+ &data->mem_access_attr);
+
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
}
--
2.19.2
^ permalink raw reply related
* [PATCH v1 30/63] Input: atmel_mxt_ts - implement debug output for messages
From: Jiada Wang @ 2019-08-16 8:34 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
From: Nick Dyer <nick.dyer@itdev.co.uk>
Add a debug switch which causes all messages from the touch controller to
be dumped to the dmesg log with a set prefix "MXT MSG:". This is used by
Atmel user-space utilities to debug touch operation. Enabling this output
does impact touch performance.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 3c3fcfdd4889dfeb1c80ae8cd94a622c6342b06a)
[gdavis: Forward port and fix conflicts.]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 44 ++++++++++++++++++++++--
1 file changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ba608d04ee82..e317900279ed 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -335,6 +335,7 @@ struct mxt_data {
u8 t100_aux_ampl;
u8 t100_aux_area;
u8 t100_aux_vect;
+ bool debug_enabled;
u8 max_reportid;
u32 config_crc;
u32 info_crc;
@@ -460,8 +461,8 @@ static bool mxt_object_readable(unsigned int type)
static void mxt_dump_message(struct mxt_data *data, u8 *message)
{
- dev_dbg(&data->client->dev, "message: %*ph\n",
- data->T5_msg_size, message);
+ dev_dbg(&data->client->dev, "MXT MSG: %*ph\n",
+ data->T5_msg_size, message);
}
static int mxt_wait_for_completion(struct mxt_data *data,
@@ -1213,6 +1214,7 @@ static void mxt_proc_t93_messages(struct mxt_data *data, u8 *msg)
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
+ bool dump = data->debug_enabled;
if (report_id == MXT_RPTID_NOMSG)
return 0;
@@ -1247,9 +1249,12 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
} else if (report_id == data->T93_reportid) {
mxt_proc_t93_messages(data, message);
} else {
- mxt_dump_message(data, message);
+ dump = true;
}
+ if (dump)
+ mxt_dump_message(data, message);
+
return 1;
}
@@ -3518,6 +3523,36 @@ static ssize_t mxt_update_cfg_store(struct device *dev,
return ret;
}
+static ssize_t mxt_debug_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ char c;
+
+ c = data->debug_enabled ? '1' : '0';
+ return scnprintf(buf, PAGE_SIZE, "%c\n", c);
+}
+
+static ssize_t mxt_debug_enable_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ u8 i;
+ ssize_t ret;
+
+ if (kstrtou8(buf, 0, &i) == 0 && i < 2) {
+ data->debug_enabled = (i == 1);
+
+ dev_dbg(dev, "%s\n", i ? "debug enabled" : "debug disabled");
+ ret = count;
+ } else {
+ dev_dbg(dev, "debug_enabled write error\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
static struct attribute *mxt_fw_attrs[] = {
@@ -3534,6 +3569,8 @@ static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);
static DEVICE_ATTR(config_crc, S_IRUGO, mxt_config_crc_show, NULL);
+static DEVICE_ATTR(debug_enable, S_IWUSR | S_IRUSR, mxt_debug_enable_show,
+ mxt_debug_enable_store);
static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -3541,6 +3578,7 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_object.attr,
&dev_attr_update_cfg.attr,
&dev_attr_config_crc.attr,
+ &dev_attr_debug_enable.attr,
NULL
};
--
2.19.2
^ permalink raw reply related
* [PATCH v1 29/63] Input: atmel_mxt_ts - orientation is not present in hover
From: Jiada Wang @ 2019-08-16 8:33 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083415.18819-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
When in hover, the orientation information is not sent
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 0c885d5bd276bd9240c43aa046fc407cbe2ae864)
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 86c016dbec0d..ba608d04ee82 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1028,10 +1028,6 @@ static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
distance = MXT_DISTANCE_HOVERING;
hover = true;
active = true;
-
- if (data->t100_aux_vect)
- orientation = message[data->t100_aux_vect];
-
break;
case MXT_T100_TYPE_FINGER:
--
2.19.2
^ permalink raw reply related
* [PATCH v1 28/63] Input: atmel_mxt_ts - implement I2C retries
From: Jiada Wang @ 2019-08-16 8:33 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083415.18819-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Some maXTouch chips (eg mXT1386) will not respond on the first I2C request
when they are in a sleep state. It must be retried after a delay for the
chip to wake up.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 63fd7a2cd03c3a572a5db39c52f4856819e1835d)
[gdavis: Forward port and fix conflicts.]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 45 ++++++++++++++++--------
1 file changed, 30 insertions(+), 15 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index d3e1cd677aa7..86c016dbec0d 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -216,6 +216,7 @@ enum t100_type {
#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
+#define MXT_WAKEUP_TIME 25 /* msec */
#define MXT_REGULATOR_DELAY 150 /* msec */
#define MXT_CHG_DELAY 100 /* msec */
#define MXT_POWERON_DELAY 150 /* msec */
@@ -723,6 +724,7 @@ static int __mxt_read_reg(struct i2c_client *client,
struct i2c_msg xfer[2];
u8 buf[2];
int ret;
+ bool retry = false;
buf[0] = reg & 0xff;
buf[1] = (reg >> 8) & 0xff;
@@ -739,17 +741,22 @@ static int __mxt_read_reg(struct i2c_client *client,
xfer[1].len = len;
xfer[1].buf = val;
- ret = i2c_transfer(client->adapter, xfer, 2);
- if (ret == 2) {
- ret = 0;
- } else {
- if (ret >= 0)
- ret = -EIO;
- dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
- __func__, ret);
+retry_read:
+ ret = i2c_transfer(client->adapter, xfer, ARRAY_SIZE(xfer));
+ if (ret != ARRAY_SIZE(xfer)) {
+ if (!retry) {
+ dev_dbg(&client->dev, "%s: i2c retry\n", __func__);
+ msleep(MXT_WAKEUP_TIME);
+ retry = true;
+ goto retry_read;
+ } else {
+ dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+ __func__, ret);
+ return -EIO;
+ }
}
- return ret;
+ return 0;
}
static int mxt_read_blks(struct mxt_data *data, u16 start, u16 count, u8 *buf)
@@ -779,6 +786,7 @@ static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
u8 *buf;
size_t count;
int ret;
+ bool retry = false;
count = len + 2;
buf = kmalloc(count, GFP_KERNEL);
@@ -789,14 +797,21 @@ static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
buf[1] = (reg >> 8) & 0xff;
memcpy(&buf[2], val, len);
+retry_write:
ret = i2c_master_send(client, buf, count);
- if (ret == count) {
- ret = 0;
- } else {
- if (ret >= 0)
+ if (ret != count) {
+ if (!retry) {
+ dev_dbg(&client->dev, "%s: i2c retry\n", __func__);
+ msleep(MXT_WAKEUP_TIME);
+ retry = true;
+ goto retry_write;
+ } else {
+ dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+ __func__, ret);
ret = -EIO;
- dev_err(&client->dev, "%s: i2c send failed (%d)\n",
- __func__, ret);
+ }
+ } else {
+ ret = 0;
}
kfree(buf);
--
2.19.2
^ permalink raw reply related
* [PATCH v1 27/63] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators
From: Jiada Wang @ 2019-08-16 8:33 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083415.18819-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
The path of enabling the IRQ in the probe function is not safe in level
triggered operation, if it was already powered up and there is a message
waiting on the device (eg finger down) because the object table has not yet
been read. This forces the ISR into a hard loop.
Delay enabling the interrupt until it is first needed.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 64c9dadc4a3250a185baf06ab0f628be45d5d9a0)
[gdavis: Resolve forward port conflicts due to v4.14-rc1 commit
8cc8446b9b62 ("Input: atmel_mxt_ts - use more managed
resources") and applying upstream commit 96a938aa214e ("Input:
atmel_mxt_ts - remove platform data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 40 +++++++++++++++---------
1 file changed, 26 insertions(+), 14 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 2bc80abcbd80..d3e1cd677aa7 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1450,9 +1450,24 @@ static int mxt_acquire_irq(struct mxt_data *data)
{
int error;
- enable_irq(data->irq);
+ if (!data->irq) {
+ error = devm_request_threaded_irq(&data->client->dev,
+ data->client->irq,
+ NULL, mxt_interrupt,
+ IRQF_ONESHOT,
+ data->client->name, data);
+ if (error) {
+ dev_err(&data->client->dev, "Error requesting irq\n");
+ return error;
+ }
+
+ /* Presence of data->irq means IRQ initialised */
+ data->irq = data->client->irq;
+ } else {
+ enable_irq(data->irq);
+ }
- if (data->use_retrigen_workaround) {
+ if (data->object_table && data->use_retrigen_workaround) {
error = mxt_process_messages_until_invalid(data);
if (error)
return error;
@@ -3369,7 +3384,9 @@ static int mxt_load_fw(struct device *dev)
goto release_firmware;
}
- enable_irq(data->irq);
+ ret = mxt_acquire_irq(data);
+ if (ret)
+ goto release_firmware;
/* Poll after 0.1s if no interrupt received */
schedule_delayed_work(&data->flash->work, HZ / 10);
@@ -3769,7 +3786,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
client->adapter->nr, client->addr);
data->client = client;
- data->irq = client->irq;
i2c_set_clientdata(client, data);
init_completion(&data->chg_completion);
@@ -3797,26 +3813,22 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}
- error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, mxt_interrupt, IRQF_ONESHOT,
- client->name, data);
- if (error) {
- dev_err(&client->dev, "Failed to register interrupt\n");
- return error;
- }
-
if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ error = mxt_acquire_irq(data);
+ if (error)
+ return error;
+
error = mxt_probe_regulators(data);
if (error)
return error;
+
+ disable_irq(data->irq);
} else if (data->reset_gpio) {
msleep(MXT_RESET_GPIO_TIME);
gpiod_set_value(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
}
- disable_irq(data->irq);
-
error = sysfs_create_group(&client->dev.kobj, &mxt_fw_attr_group);
if (error) {
dev_err(&client->dev, "Failure %d creating fw sysfs group\n",
--
2.19.2
^ permalink raw reply related
* [PATCH v1 26/63] Input: atmel_mxt_ts - make bootloader interrupt driven
From: Jiada Wang @ 2019-08-16 8:33 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083415.18819-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 67a3eea0cfc724c3c2a7410ac064f74227c7c6ef)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 120 ++++++++++++-----------
1 file changed, 61 insertions(+), 59 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 6f185bc5128c..2bc80abcbd80 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -27,6 +27,7 @@
#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
#include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-v4l2.h>
@@ -218,6 +219,7 @@ enum t100_type {
#define MXT_REGULATOR_DELAY 150 /* msec */
#define MXT_CHG_DELAY 100 /* msec */
#define MXT_POWERON_DELAY 150 /* msec */
+#define MXT_BOOTLOADER_WAIT 36E5 /* 1 minute */
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -299,6 +301,7 @@ struct mxt_fw_frame {
/* Firmware update context */
struct mxt_flash {
+ struct mxt_data *data;
const struct firmware *fw;
struct mxt_fw_frame *frame;
loff_t pos;
@@ -306,7 +309,8 @@ struct mxt_flash {
unsigned int count;
unsigned int retry;
u8 previous;
- bool complete;
+ struct completion flash_completion;
+ struct delayed_work work;
};
/* Each client has this additional data */
@@ -355,6 +359,7 @@ struct mxt_data {
char *cfg_name;
const char *pcfg_name;
const char *input_name;
+ struct mxt_flash *flash;
/* Cached parameters from object table */
u16 T5_address;
@@ -599,28 +604,17 @@ static int mxt_write_firmware_frame(struct mxt_data *data, struct mxt_flash *f)
f->frame_size);
}
-static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
+static int mxt_check_bootloader(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
+ struct mxt_flash *f = data->flash;
u8 state;
int ret;
- /*
- * In application update mode, the interrupt
- * line signals state transitions. We must wait for the
- * CHG assertion before reading the status byte.
- * Once the status byte has been read, the line is deasserted.
- */
- ret = mxt_wait_for_completion(data, &data->chg_completion,
- MXT_FW_CHG_TIMEOUT);
- if (ret) {
- /*
- * TODO: handle -ERESTARTSYS better by terminating
- * fw update process before returning to userspace
- * by writing length 0x000 to device (iff we are in
- * WAITING_FRAME_DATA state).
- */
- dev_warn(dev, "Update wait error %d\n", ret);
+ /* Handle interrupt after download/flash process */
+ if (f->pos >= f->fw->size) {
+ complete(&f->flash_completion);
+ return 0;
}
ret = mxt_bootloader_read(data, &state, 1);
@@ -666,14 +660,12 @@ static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
f->pos += f->frame_size;
f->count++;
- if (f->pos >= f->fw->size) {
- f->complete = true;
+ if (f->pos >= f->fw->size)
dev_info(dev, "Sent %u frames, %zu bytes\n",
f->count, f->fw->size);
- } else if (f->count % 50 == 0) {
+ else if (f->count % 50 == 0)
dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
f->count, f->pos, f->fw->size);
- }
break;
@@ -695,6 +687,9 @@ static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
f->previous = state;
+ /* Poll after 0.1s if no interrupt received */
+ schedule_delayed_work(&f->work, HZ / 10);
+
return 0;
unexpected:
@@ -1402,8 +1397,12 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
complete(&data->chg_completion);
- if (data->in_bootloader)
- return IRQ_HANDLED;
+ if (data->in_bootloader) {
+ if (data->flash && &data->flash->work)
+ cancel_delayed_work_sync(&data->flash->work);
+
+ return IRQ_RETVAL(mxt_check_bootloader(data));
+ }
if (!data->object_table)
return IRQ_HANDLED;
@@ -3300,16 +3299,13 @@ static int mxt_enter_bootloader(struct mxt_data *data)
if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
mxt_regulator_enable(data);
- if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP)
- enable_irq(data->irq);
-
data->suspended = false;
}
if (!data->in_bootloader) {
- /* Change to the bootloader mode */
- data->in_bootloader = true;
+ disable_irq(data->irq);
+ /* Change to the bootloader mode */
ret = mxt_t6_command(data, MXT_COMMAND_RESET,
MXT_BOOT_VALUE, false);
if (ret)
@@ -3322,67 +3318,73 @@ static int mxt_enter_bootloader(struct mxt_data *data)
if (ret)
return ret;
+ data->in_bootloader = true;
mxt_sysfs_remove(data);
mxt_free_input_device(data);
mxt_free_object_table(data);
- } else {
- enable_irq(data->irq);
}
- reinit_completion(&data->chg_completion);
+ dev_dbg(&data->client->dev, "Entered bootloader\n");
return 0;
}
+static void mxt_fw_work(struct work_struct *work)
+{
+ struct mxt_flash *f =
+ container_of(work, struct mxt_flash, work.work);
+
+ mxt_check_bootloader(f->data);
+}
+
static int mxt_load_fw(struct device *dev)
{
struct mxt_data *data = dev_get_drvdata(dev);
- struct mxt_flash f = { 0, };
int ret;
- ret = request_firmware(&f.fw, data->fw_name, dev);
+ data->flash = devm_kzalloc(dev, sizeof(struct mxt_flash), GFP_KERNEL);
+ if (!data->flash)
+ return -ENOMEM;
+
+ data->flash->data = data;
+
+ ret = request_firmware(&data->flash->fw, data->fw_name, dev);
if (ret) {
dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
- return ret;
+ goto free;
}
/* Check for incorrect enc file */
- ret = mxt_check_firmware_format(dev, f.fw);
+ ret = mxt_check_firmware_format(dev, data->flash->fw);
if (ret)
goto release_firmware;
- ret = mxt_enter_bootloader(data);
- if (ret)
- goto release_firmware;
+ init_completion(&data->flash->flash_completion);
+ INIT_DELAYED_WORK(&data->flash->work, mxt_fw_work);
+ reinit_completion(&data->flash->flash_completion);
- while (true) {
- ret = mxt_check_bootloader(data, &f);
+ if (!data->in_bootloader) {
+ ret = mxt_enter_bootloader(data);
if (ret)
- return ret;
-
- if (f.complete)
- break;
+ goto release_firmware;
}
- /* Wait for flash. */
- ret = mxt_wait_for_completion(data, &data->chg_completion,
- MXT_FW_RESET_TIME);
- if (ret)
- goto disable_irq;
+ enable_irq(data->irq);
+ /* Poll after 0.1s if no interrupt received */
+ schedule_delayed_work(&data->flash->work, HZ / 10);
- /*
- * Wait for device to reset. Some bootloader versions do not assert
- * the CHG line after bootloading has finished, so ignore potential
- * errors.
- */
- mxt_wait_for_completion(data, &data->chg_completion, MXT_FW_RESET_TIME);
+ /* Wait for flash. */
+ ret = mxt_wait_for_completion(data, &data->flash->flash_completion,
+ MXT_BOOTLOADER_WAIT);
- data->in_bootloader = false;
-disable_irq:
disable_irq(data->irq);
+ cancel_delayed_work_sync(&data->flash->work);
+ data->in_bootloader = false;
release_firmware:
- release_firmware(f.fw);
+ release_firmware(data->flash->fw);
+free:
+ devm_kfree(dev, data->flash);
return ret;
}
--
2.19.2
^ permalink raw reply related
* [PATCH v1 25/63] Input: atmel_mxt_ts - rename bl_completion to chg_completion
From: Jiada Wang @ 2019-08-16 8:33 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
From: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit dda8453bfb44216645ede798918a314d4fca2481)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 27 ++++++++++++------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a7805df83af2..6f185bc5128c 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -381,9 +381,6 @@ struct mxt_data {
u8 T100_reportid_max;
u16 T107_address;
- /* for fw update in bootloader */
- struct completion bl_completion;
-
/* for reset handling */
struct completion reset_completion;
@@ -395,6 +392,9 @@ struct mxt_data {
enum mxt_suspend_mode suspend_mode;
+ /* for power up handling */
+ struct completion chg_completion;
+
/* Indicates whether device is in suspend */
bool suspended;
@@ -611,7 +611,7 @@ static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
* CHG assertion before reading the status byte.
* Once the status byte has been read, the line is deasserted.
*/
- ret = mxt_wait_for_completion(data, &data->bl_completion,
+ ret = mxt_wait_for_completion(data, &data->chg_completion,
MXT_FW_CHG_TIMEOUT);
if (ret) {
/*
@@ -1400,11 +1400,10 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
{
struct mxt_data *data = dev_id;
- if (data->in_bootloader) {
- /* bootloader state transition completion */
- complete(&data->bl_completion);
+ complete(&data->chg_completion);
+
+ if (data->in_bootloader)
return IRQ_HANDLED;
- }
if (!data->object_table)
return IRQ_HANDLED;
@@ -2164,9 +2163,9 @@ static void mxt_regulator_enable(struct mxt_data *data)
msleep(MXT_CHG_DELAY);
retry_wait:
- reinit_completion(&data->bl_completion);
+ reinit_completion(&data->chg_completion);
data->in_bootloader = true;
- error = mxt_wait_for_completion(data, &data->bl_completion,
+ error = mxt_wait_for_completion(data, &data->chg_completion,
MXT_POWERON_DELAY);
if (error == -EINTR)
goto retry_wait;
@@ -3330,7 +3329,7 @@ static int mxt_enter_bootloader(struct mxt_data *data)
enable_irq(data->irq);
}
- reinit_completion(&data->bl_completion);
+ reinit_completion(&data->chg_completion);
return 0;
}
@@ -3366,7 +3365,7 @@ static int mxt_load_fw(struct device *dev)
}
/* Wait for flash. */
- ret = mxt_wait_for_completion(data, &data->bl_completion,
+ ret = mxt_wait_for_completion(data, &data->chg_completion,
MXT_FW_RESET_TIME);
if (ret)
goto disable_irq;
@@ -3377,7 +3376,7 @@ static int mxt_load_fw(struct device *dev)
* the CHG line after bootloading has finished, so ignore potential
* errors.
*/
- mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
+ mxt_wait_for_completion(data, &data->chg_completion, MXT_FW_RESET_TIME);
data->in_bootloader = false;
disable_irq:
@@ -3771,7 +3770,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
data->irq = client->irq;
i2c_set_clientdata(client, data);
- init_completion(&data->bl_completion);
+ init_completion(&data->chg_completion);
init_completion(&data->reset_completion);
init_completion(&data->crc_completion);
--
2.19.2
^ permalink raw reply related
* [PATCH v1 24/63] Input: atmel_mxt_ts - check firmware format before entering bootloader
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083338.18685-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit d691d3ee6c6de84b38464a423207b3e23cb9dc3a)
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ca882231ab41..a7805df83af2 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3347,12 +3347,12 @@ static int mxt_load_fw(struct device *dev)
return ret;
}
- ret = mxt_enter_bootloader(data);
+ /* Check for incorrect enc file */
+ ret = mxt_check_firmware_format(dev, f.fw);
if (ret)
goto release_firmware;
- /* Check for incorrect enc file */
- ret = mxt_check_firmware_format(dev, f.fw);
+ ret = mxt_enter_bootloader(data);
if (ret)
goto release_firmware;
--
2.19.2
^ permalink raw reply related
* [PATCH v1 23/63] Input: atmel_mxt_ts - improve bootloader state machine handling
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083338.18685-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
The code is much clearer if we switch on the actual state the bootloader
is in, rather than the state we want it to be in, and allows the removal
of a goto retry tangle.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 463e15ee95ee6e6274017ff645839dbe34d75c99)
[gdavis: Squash fix from George G. Davis:
- input: atmel_mxt_ts - Fix 'mxt_send_bootloader_cmd' was not
declared warning]
Signed-off-by: George G. Davis <george_davis@mentor.com>
---
Notes:
- Squash fix from George G. Davis:
+ input: atmel_mxt_ts - Fix 'mxt_send_bootloader_cmd' was not declared warning
The following sparse warning was introduced by ndyer/linux/for-upstream
commit 463e15ee95ee ("Input: atmel_mxt_ts - improve bootloader state
machine handling"):
drivers/input/touchscreen/atmel_mxt_ts.c:888:5: warning: symbol 'mxt_send_bootloader_cmd' was not declared. Should it be static?
Fix the above sparse warning by restoring the 'mxt_send_bootloader_cmd'
static declaration which was errantly removed by
ndyer/linux/for-upstream commit 463e15ee95ee ("Input: atmel_mxt_ts -
improve bootloader state machine handling").
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 183 ++++++++++++-----------
1 file changed, 98 insertions(+), 85 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 2a5f2157c322..ca882231ab41 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -305,6 +305,8 @@ struct mxt_flash {
size_t frame_size;
unsigned int count;
unsigned int retry;
+ u8 previous;
+ bool complete;
};
/* Each client has this additional data */
@@ -583,64 +585,121 @@ static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
return 0;
}
-static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
- bool wait)
+static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock);
+
+static int mxt_write_firmware_frame(struct mxt_data *data, struct mxt_flash *f)
+{
+ f->frame = (struct mxt_fw_frame *)(f->fw->data + f->pos);
+
+ /* Take account of CRC bytes */
+ f->frame_size = __be16_to_cpu(f->frame->size) + 2U;
+
+ /* Write one frame to device */
+ return mxt_bootloader_write(data, f->fw->data + f->pos,
+ f->frame_size);
+}
+
+static int mxt_check_bootloader(struct mxt_data *data, struct mxt_flash *f)
{
struct device *dev = &data->client->dev;
- u8 val;
+ u8 state;
int ret;
-recheck:
- if (wait) {
+ /*
+ * In application update mode, the interrupt
+ * line signals state transitions. We must wait for the
+ * CHG assertion before reading the status byte.
+ * Once the status byte has been read, the line is deasserted.
+ */
+ ret = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_FW_CHG_TIMEOUT);
+ if (ret) {
/*
- * In application update mode, the interrupt
- * line signals state transitions. We must wait for the
- * CHG assertion before reading the status byte.
- * Once the status byte has been read, the line is deasserted.
+ * TODO: handle -ERESTARTSYS better by terminating
+ * fw update process before returning to userspace
+ * by writing length 0x000 to device (iff we are in
+ * WAITING_FRAME_DATA state).
*/
- ret = mxt_wait_for_completion(data, &data->bl_completion,
- MXT_FW_CHG_TIMEOUT);
- if (ret) {
- /*
- * TODO: handle -ERESTARTSYS better by terminating
- * fw update process before returning to userspace
- * by writing length 0x000 to device (iff we are in
- * WAITING_FRAME_DATA state).
- */
- dev_err(dev, "Update wait error %d\n", ret);
- return ret;
- }
+ dev_warn(dev, "Update wait error %d\n", ret);
}
- ret = mxt_bootloader_read(data, &val, 1);
+ ret = mxt_bootloader_read(data, &state, 1);
if (ret)
return ret;
+ /* Remove don't care bits */
+ if (state & ~MXT_BOOT_STATUS_MASK)
+ state &= ~MXT_BOOT_STATUS_MASK;
+
switch (state) {
case MXT_WAITING_BOOTLOAD_CMD:
+ dev_info(dev, "Unlocking bootloader\n");
+ ret = mxt_send_bootloader_cmd(data, true);
+ if (ret)
+ return ret;
+
+ break;
+
case MXT_WAITING_FRAME_DATA:
- case MXT_APP_CRC_FAIL:
- val &= ~MXT_BOOT_STATUS_MASK;
+ if ((f->previous != MXT_WAITING_BOOTLOAD_CMD)
+ && (f->previous != MXT_FRAME_CRC_PASS)
+ && (f->previous != MXT_FRAME_CRC_FAIL))
+ goto unexpected;
+
+ ret = mxt_write_firmware_frame(data, f);
+ if (ret)
+ return ret;
+
+ break;
+
+ case MXT_FRAME_CRC_CHECK:
+ if (f->previous != MXT_WAITING_FRAME_DATA)
+ goto unexpected;
break;
+
case MXT_FRAME_CRC_PASS:
- if (val == MXT_FRAME_CRC_CHECK) {
- goto recheck;
- } else if (val == MXT_FRAME_CRC_FAIL) {
- dev_err(dev, "Bootloader CRC fail\n");
- return -EINVAL;
+ if (f->previous != MXT_FRAME_CRC_CHECK)
+ goto unexpected;
+
+ /* Next frame */
+ f->retry = 0;
+ f->pos += f->frame_size;
+ f->count++;
+
+ if (f->pos >= f->fw->size) {
+ f->complete = true;
+ dev_info(dev, "Sent %u frames, %zu bytes\n",
+ f->count, f->fw->size);
+ } else if (f->count % 50 == 0) {
+ dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
+ f->count, f->pos, f->fw->size);
}
+
+ break;
+
+ case MXT_FRAME_CRC_FAIL:
+ if (f->retry > 20) {
+ dev_err(dev, "Retry count exceeded\n");
+ return -EIO;
+ }
+
+ /* Back off by 20ms per retry */
+ dev_dbg(dev, "Bootloader frame CRC failure\n");
+ f->retry++;
+ msleep(f->retry * 20);
break;
+
default:
return -EINVAL;
}
- if (val != state) {
- dev_err(dev, "Invalid bootloader state %02X != %02X\n",
- val, state);
- return -EINVAL;
- }
+ f->previous = state;
return 0;
+
+unexpected:
+ dev_err(dev, "Unexpected state transition\n");
+ return -EINVAL;
}
static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
@@ -3297,57 +3356,13 @@ static int mxt_load_fw(struct device *dev)
if (ret)
goto release_firmware;
- ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
- if (ret) {
- /* Bootloader may still be unlocked from previous attempt */
- ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
- if (ret)
- goto disable_irq;
- } else {
- dev_info(dev, "Unlocking bootloader\n");
-
- /* Unlock bootloader */
- ret = mxt_send_bootloader_cmd(data, true);
+ while (true) {
+ ret = mxt_check_bootloader(data, &f);
if (ret)
- goto disable_irq;
- }
-
- while (f.pos < f.fw->size) {
- f.frame = (struct mxt_fw_frame *)(f.fw->data + f.pos);
-
- ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
- if (ret)
- goto disable_irq;
-
- /* Take account of CRC bytes */
- f.frame_size = __be16_to_cpu(f.frame->size) + 2U;
-
- /* Write one frame to device */
- ret = mxt_bootloader_write(data, f.fw->data + f.pos,
- f.frame_size);
- if (ret)
- goto disable_irq;
-
- ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
- if (ret) {
- f.retry++;
-
- /* Back off by 20ms per retry */
- msleep(f.retry * 20);
-
- if (f.retry > 20) {
- dev_err(dev, "Retry count exceeded\n");
- goto disable_irq;
- }
- } else {
- f.retry = 0;
- f.pos += f.frame_size;
- f.count++;
- }
+ return ret;
- if (f.count % 50 == 0)
- dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
- f.count, f.pos, f.fw->size);
+ if (f.complete)
+ break;
}
/* Wait for flash. */
@@ -3356,7 +3371,6 @@ static int mxt_load_fw(struct device *dev)
if (ret)
goto disable_irq;
- dev_dbg(dev, "Sent %u frames, %lld bytes\n", f.count, f.pos);
/*
* Wait for device to reset. Some bootloader versions do not assert
@@ -3366,7 +3380,6 @@ static int mxt_load_fw(struct device *dev)
mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
data->in_bootloader = false;
-
disable_irq:
disable_irq(data->irq);
release_firmware:
--
2.19.2
^ permalink raw reply related
* [PATCH v1 22/63] Input: atmel_mxt_ts - combine bootloader version query with probe
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083338.18685-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
This removes some complexity from the bootloader state machine, and means
that we always output some debug about the version as soon as we start
talking to the bootloader.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit a2d141f170c80fea6663af98aab0be32abc0ddb0)
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 45 +++++++-----------------
1 file changed, 13 insertions(+), 32 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e171a843751f..2a5f2157c322 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -558,47 +558,31 @@ static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
{
struct device *dev = &data->client->dev;
int error;
- u8 val;
- bool crc_failure;
+ u8 buf[3];
+ bool crc_failure, extended_id;
error = mxt_lookup_bootloader_address(data, alt_address);
if (error)
return error;
- error = mxt_bootloader_read(data, &val, 1);
+ /* Check bootloader status and version information */
+ error = mxt_bootloader_read(data, buf, sizeof(buf));
if (error)
return error;
- /* Check app crc fail mode */
- crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
+ crc_failure = (buf[0] & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
+ extended_id = buf[0] & MXT_BOOT_EXTENDED_ID;
- dev_err(dev, "Detected bootloader, status:%02X%s\n",
- val, crc_failure ? ", APP_CRC_FAIL" : "");
+ dev_info(dev, "Found bootloader addr:%02x ID:%u%s%u%s\n",
+ data->bootloader_addr,
+ extended_id ? (buf[1] & MXT_BOOT_ID_MASK) : buf[0],
+ extended_id ? " version:" : "",
+ extended_id ? buf[2] : 0,
+ crc_failure ? ", APP_CRC_FAIL" : "");
return 0;
}
-static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
-{
- struct device *dev = &data->client->dev;
- u8 buf[3];
-
- if (val & MXT_BOOT_EXTENDED_ID) {
- if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
- dev_err(dev, "%s: i2c failure\n", __func__);
- return val;
- }
-
- dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
-
- return buf[0];
- } else {
- dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
-
- return val;
- }
-}
-
static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
bool wait)
{
@@ -632,9 +616,6 @@ static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
if (ret)
return ret;
- if (state == MXT_WAITING_BOOTLOAD_CMD)
- val = mxt_get_bootloader_version(data, val);
-
switch (state) {
case MXT_WAITING_BOOTLOAD_CMD:
case MXT_WAITING_FRAME_DATA:
@@ -3279,7 +3260,7 @@ static int mxt_enter_bootloader(struct mxt_data *data)
msleep(MXT_RESET_TIME);
/* Do not need to scan since we know family ID */
- ret = mxt_lookup_bootloader_address(data, 0);
+ ret = mxt_probe_bootloader(data, 0);
if (ret)
return ret;
--
2.19.2
^ permalink raw reply related
* [PATCH v1 21/63] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083338.18685-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit bedd706a32522b946467e15f4f4f24de86a1b4d7)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 43 +++++++++++++++---------
1 file changed, 27 insertions(+), 16 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ad5b4a246f55..e171a843751f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3253,23 +3253,10 @@ static int mxt_check_firmware_format(struct device *dev,
return -EINVAL;
}
-static int mxt_load_fw(struct device *dev)
+static int mxt_enter_bootloader(struct mxt_data *data)
{
- struct mxt_data *data = dev_get_drvdata(dev);
- struct mxt_flash f = { 0, };
int ret;
- ret = request_firmware(&f.fw, data->fw_name, dev);
- if (ret) {
- dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
- return ret;
- }
-
- /* Check for incorrect enc file */
- ret = mxt_check_firmware_format(dev, f.fw);
- if (ret)
- goto release_firmware;
-
if (data->suspended) {
if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
mxt_regulator_enable(data);
@@ -3287,14 +3274,14 @@ static int mxt_load_fw(struct device *dev)
ret = mxt_t6_command(data, MXT_COMMAND_RESET,
MXT_BOOT_VALUE, false);
if (ret)
- goto release_firmware;
+ return ret;
msleep(MXT_RESET_TIME);
/* Do not need to scan since we know family ID */
ret = mxt_lookup_bootloader_address(data, 0);
if (ret)
- goto release_firmware;
+ return ret;
mxt_sysfs_remove(data);
mxt_free_input_device(data);
@@ -3305,6 +3292,30 @@ static int mxt_load_fw(struct device *dev)
reinit_completion(&data->bl_completion);
+ return 0;
+}
+
+static int mxt_load_fw(struct device *dev)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_flash f = { 0, };
+ int ret;
+
+ ret = request_firmware(&f.fw, data->fw_name, dev);
+ if (ret) {
+ dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
+ return ret;
+ }
+
+ ret = mxt_enter_bootloader(data);
+ if (ret)
+ goto release_firmware;
+
+ /* Check for incorrect enc file */
+ ret = mxt_check_firmware_format(dev, f.fw);
+ if (ret)
+ goto release_firmware;
+
ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
if (ret) {
/* Bootloader may still be unlocked from previous attempt */
--
2.19.2
^ permalink raw reply related
* [PATCH v1 20/63] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
From: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 1bbe20ff3dcd6612e7942c495929eae5c138ece2)
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 59 +++++++++++++++---------
1 file changed, 36 insertions(+), 23 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 99e5c84d207a..ad5b4a246f55 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -291,6 +291,22 @@ struct mxt_cfg {
struct mxt_info info;
};
+/* Firmware frame structure */
+struct mxt_fw_frame {
+ __be16 size;
+ u8 data[];
+};
+
+/* Firmware update context */
+struct mxt_flash {
+ const struct firmware *fw;
+ struct mxt_fw_frame *frame;
+ loff_t pos;
+ size_t frame_size;
+ unsigned int count;
+ unsigned int retry;
+};
+
/* Each client has this additional data */
struct mxt_data {
struct i2c_client *client;
@@ -3240,21 +3256,17 @@ static int mxt_check_firmware_format(struct device *dev,
static int mxt_load_fw(struct device *dev)
{
struct mxt_data *data = dev_get_drvdata(dev);
- const struct firmware *fw = NULL;
- unsigned int frame_size;
- unsigned int pos = 0;
- unsigned int retry = 0;
- unsigned int frame = 0;
+ struct mxt_flash f = { 0, };
int ret;
- ret = request_firmware(&fw, data->fw_name, dev);
+ ret = request_firmware(&f.fw, data->fw_name, dev);
if (ret) {
dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
return ret;
}
/* Check for incorrect enc file */
- ret = mxt_check_firmware_format(dev, fw);
+ ret = mxt_check_firmware_format(dev, f.fw);
if (ret)
goto release_firmware;
@@ -3308,41 +3320,42 @@ static int mxt_load_fw(struct device *dev)
goto disable_irq;
}
- while (pos < fw->size) {
+ while (f.pos < f.fw->size) {
+ f.frame = (struct mxt_fw_frame *)(f.fw->data + f.pos);
+
ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
if (ret)
goto disable_irq;
- frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
-
/* Take account of CRC bytes */
- frame_size += 2;
+ f.frame_size = __be16_to_cpu(f.frame->size) + 2U;
/* Write one frame to device */
- ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
+ ret = mxt_bootloader_write(data, f.fw->data + f.pos,
+ f.frame_size);
if (ret)
goto disable_irq;
ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
if (ret) {
- retry++;
+ f.retry++;
/* Back off by 20ms per retry */
- msleep(retry * 20);
+ msleep(f.retry * 20);
- if (retry > 20) {
+ if (f.retry > 20) {
dev_err(dev, "Retry count exceeded\n");
goto disable_irq;
}
} else {
- retry = 0;
- pos += frame_size;
- frame++;
+ f.retry = 0;
+ f.pos += f.frame_size;
+ f.count++;
}
- if (frame % 50 == 0)
- dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
- frame, pos, fw->size);
+ if (f.count % 50 == 0)
+ dev_dbg(dev, "Sent %u frames, %lld/%zu bytes\n",
+ f.count, f.pos, f.fw->size);
}
/* Wait for flash. */
@@ -3351,7 +3364,7 @@ static int mxt_load_fw(struct device *dev)
if (ret)
goto disable_irq;
- dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
+ dev_dbg(dev, "Sent %u frames, %lld bytes\n", f.count, f.pos);
/*
* Wait for device to reset. Some bootloader versions do not assert
@@ -3365,7 +3378,7 @@ static int mxt_load_fw(struct device *dev)
disable_irq:
disable_irq(data->irq);
release_firmware:
- release_firmware(fw);
+ release_firmware(f.fw);
return ret;
}
--
2.19.2
^ permalink raw reply related
* [PATCH v1 19/63] Input: atmel_mxt_ts - check data->input_dev is not null in mxt_input_sync()
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083257.18546-1-jiada_wang@mentor.com>
From: Janus Cheng <drxaero@gmail.com>
* Symptom: if update_fw and update_cfg, kernel panic occurs.
* Reproducibility: 10%
* Root Cause:
- If update_fw, the T6 will send a CFG_ERR message periodically.
- After that, update_cfg process begin, the mxt_update_cfg_store() will
invoke mxt_free_input_device() and nullify data->input_dev.
- The CFG_ERR message will trigger mxt_interrupt(), and mxt_input_sync()
will be invoked by mxt_process_messages_t44(). And mxt_input_sync()
references a NULL data->input_dev and kernel panic occurs.
TrackerRMS TKT-004235
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit c909ada856861f305653b127db3ea0fa60264331)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a4f8364ecca9..99e5c84d207a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -837,9 +837,11 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
static void mxt_input_sync(struct mxt_data *data)
{
- input_mt_report_pointer_emulation(data->input_dev,
- data->t19_num_keys);
- input_sync(data->input_dev);
+ if (data->input_dev) {
+ input_mt_report_pointer_emulation(data->input_dev,
+ data->t19_num_keys);
+ input_sync(data->input_dev);
+ }
}
static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
--
2.19.2
^ permalink raw reply related
* [PATCH v1 18/63] Input: atmel_mxt_ts - add config checksum attribute to sysfs
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083257.18546-1-jiada_wang@mentor.com>
From: karl tsou <karl.funlab@gmail.com>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 03477477ddbe5dcad42853ab3f84166a8f807acf)
[gdavis: Forward port and fix conflicts.]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 4f335c3da994..a4f8364ecca9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3122,6 +3122,15 @@ static int mxt_configure_objects(struct mxt_data *data,
return error;
}
+/* Configuration crc check sum is returned as hex xxxxxx */
+static ssize_t mxt_config_crc_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%06x\n", data->config_crc);
+}
+
/* Firmware Version is returned as Major.Minor.Build */
static ssize_t mxt_fw_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -3475,12 +3484,14 @@ static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);
+static DEVICE_ATTR(config_crc, S_IRUGO, mxt_config_crc_show, NULL);
static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
&dev_attr_hw_version.attr,
&dev_attr_object.attr,
&dev_attr_update_cfg.attr,
+ &dev_attr_config_crc.attr,
NULL
};
--
2.19.2
^ permalink raw reply related
* [PATCH v1 17/63] Input: atmel_mxt_ts - allow input name to be specified in platform data
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083257.18546-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Android systems identify the input device and map to IDC file by using the
input device name. To avoid unnecessary deltas to the driver file, allow
this to be set from the platform data.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit cbf94a7bda754d2e1899d9f50313a0bccc91422d)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
.../devicetree/bindings/input/atmel,maxtouch.txt | 2 ++
drivers/input/touchscreen/atmel_mxt_ts.c | 9 ++++++++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index 713ce870805c..d7db16920083 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -40,6 +40,8 @@ Optional properties for main touchpad device:
- atmel,cfg_name: Provide name of configuration file in OBP_RAW format. This
will be downloaded from the firmware loader on probe to the device.
+- atmel,input_name: Override name of input device from the default.
+
Example:
touch@4b {
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a5ac2cc93f3f..4f335c3da994 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -336,6 +336,7 @@ struct mxt_data {
char *fw_name;
char *cfg_name;
const char *pcfg_name;
+ const char *input_name;
/* Cached parameters from object table */
u16 T5_address;
@@ -2407,7 +2408,11 @@ static int mxt_initialize_input_device(struct mxt_data *data)
if (!input_dev)
return -ENOMEM;
- input_dev->name = "Atmel maXTouch Touchscreen";
+ if (data->input_name)
+ input_dev->name = data->input_name;
+ else
+ input_dev->name = "Atmel maXTouch Touchscreen";
+
input_dev->phys = data->phys;
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = dev;
@@ -3645,6 +3650,8 @@ static int mxt_parse_device_properties(struct mxt_data *data)
device_property_read_string(dev, "atmel,cfg_name", &data->pcfg_name);
+ device_property_read_string(dev, "atmel,input_name", &data->input_name);
+
if (device_property_present(dev, keymap_property)) {
n_keys = device_property_read_u32_array(dev, keymap_property,
NULL, 0);
--
2.19.2
^ permalink raw reply related
* [PATCH v1 16/63] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083257.18546-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
There may be multiple maXTouch chips on a single device which will require
different configuration files. Add a platform data value for the
configuration filename.
Add sysfs entry to write configuration file if the platform data is not
set.
Split out the object initialisation code from mxt_initialize() into
mxt_configure_objects() to allow this.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 71a2a4d1954460b949a16b607f72bafab294ca79)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fix from Vladimir Zapolskiy:
- Input: atmel_mxt_ts - fix error paths in mxt_configure_objects()]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
---
Notes:
- Squash fix from Vladimir Zapolskiy:
+ Input: atmel_mxt_ts - fix error paths in mxt_configure_objects()
Fail in mxt_update_cfg() is critical, because the driver state machine
is broken and it can not be safely used afterwards.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
.../bindings/input/atmel,maxtouch.txt | 3 +
drivers/input/touchscreen/atmel_mxt_ts.c | 101 +++++++++++++++---
2 files changed, 92 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index e28139ce3cae..713ce870805c 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -37,6 +37,9 @@ Optional properties for main touchpad device:
MXT_SUSPEND_REGULATOR - use regulators to power down device during suspend
Definitions are in <dt-bindings/input/atmel_mxt_ts.h>.
+- atmel,cfg_name: Provide name of configuration file in OBP_RAW format. This
+ will be downloaded from the firmware loader on probe to the device.
+
Example:
touch@4b {
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index ca317d267be1..a5ac2cc93f3f 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -34,7 +34,6 @@
#include <dt-bindings/input/atmel_mxt_ts.h>
/* Configuration file */
-#define MXT_CFG_NAME "maxtouch.cfg"
#define MXT_CFG_MAGIC "OBP_RAW V1"
/* Registers */
@@ -335,6 +334,8 @@ struct mxt_data {
struct regulator *reg_vdd;
struct regulator *reg_avdd;
char *fw_name;
+ char *cfg_name;
+ const char *pcfg_name;
/* Cached parameters from object table */
u16 T5_address;
@@ -377,6 +378,9 @@ struct mxt_data {
/* Indicates whether device is in suspend */
bool suspended;
+
+ /* Indicates whether device is updating configuration */
+ bool updating_config;
};
struct mxt_vb2_buffer {
@@ -2574,13 +2578,21 @@ static int mxt_initialize(struct mxt_data *data)
if (error)
return error;
- error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
- &client->dev, GFP_KERNEL, data,
- mxt_config_cb);
- if (error) {
- dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
- error);
- goto err_free_sysfs;
+ if (data->cfg_name) {
+ error = request_firmware_nowait(THIS_MODULE, true,
+ data->cfg_name,
+ &client->dev,
+ GFP_KERNEL, data,
+ mxt_config_cb);
+ if (error) {
+ dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+ error);
+ goto err_free_sysfs;
+ }
+ } else {
+ error = mxt_configure_objects(data, NULL);
+ if (error)
+ goto err_free_sysfs;
}
return 0;
@@ -3077,19 +3089,21 @@ static int mxt_configure_objects(struct mxt_data *data,
error = mxt_init_t7_power_cfg(data);
if (error) {
dev_err(dev, "Failed to initialize power cfg\n");
- return error;
+ goto err_free_object_table;
}
if (cfg) {
error = mxt_update_cfg(data, cfg);
- if (error)
+ if (error) {
dev_warn(dev, "Error %d updating config\n", error);
+ goto err_free_object_table;
+ }
}
if (data->multitouch) {
error = mxt_initialize_input_device(data);
if (error)
- return error;
+ goto err_free_object_table;
} else {
dev_warn(dev, "No touch object detected\n");
}
@@ -3097,6 +3111,10 @@ static int mxt_configure_objects(struct mxt_data *data,
mxt_debug_init(data);
return 0;
+
+err_free_object_table:
+ mxt_free_object_table(data);
+ return error;
}
/* Firmware Version is returned as Major.Minor.Build */
@@ -3388,6 +3406,55 @@ static ssize_t mxt_update_fw_store(struct device *dev,
return count;
}
+static ssize_t mxt_update_cfg_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ const struct firmware *cfg;
+ int ret;
+
+ ret = mxt_update_file_name(dev, &data->cfg_name, buf, count);
+ if (ret)
+ return ret;
+
+ ret = request_firmware(&cfg, data->cfg_name, dev);
+ if (ret < 0) {
+ dev_err(dev, "Failure to request config file %s\n",
+ data->cfg_name);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ data->updating_config = true;
+
+ mxt_free_input_device(data);
+
+ if (data->suspended) {
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ enable_irq(data->irq);
+ mxt_regulator_enable(data);
+ } else if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP) {
+ mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+ mxt_acquire_irq(data);
+ }
+
+ data->suspended = false;
+ }
+
+ ret = mxt_configure_objects(data, cfg);
+ if (ret)
+ goto release;
+
+ ret = count;
+
+release:
+ release_firmware(cfg);
+out:
+ data->updating_config = false;
+ return ret;
+}
+
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
static struct attribute *mxt_fw_attrs[] = {
@@ -3402,11 +3469,13 @@ static const struct attribute_group mxt_fw_attr_group = {
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_cfg, S_IWUSR, NULL, mxt_update_cfg_store);
static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
&dev_attr_hw_version.attr,
&dev_attr_object.attr,
+ &dev_attr_update_cfg.attr,
NULL
};
@@ -3507,7 +3576,7 @@ static int mxt_stop(struct mxt_data *data)
{
int ret;
- if (data->suspended || data->in_bootloader)
+ if (data->suspended || data->in_bootloader || data->updating_config)
return 0;
switch (data->suspend_mode) {
@@ -3574,6 +3643,8 @@ static int mxt_parse_device_properties(struct mxt_data *data)
int n_keys;
int error;
+ device_property_read_string(dev, "atmel,cfg_name", &data->pcfg_name);
+
if (device_property_present(dev, keymap_property)) {
n_keys = device_property_read_u32_array(dev, keymap_property,
NULL, 0);
@@ -3673,6 +3744,12 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (error)
return error;
+ if (data->pcfg_name)
+ mxt_update_file_name(&data->client->dev,
+ &data->cfg_name,
+ data->pcfg_name,
+ strlen(data->pcfg_name));
+
data->reset_gpio = devm_gpiod_get_optional(&client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(data->reset_gpio)) {
--
2.19.2
^ permalink raw reply related
* [PATCH v1 15/63] Input: atmel_mxt_ts - allow specification of firmware file name
From: Jiada Wang @ 2019-08-16 8:32 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
From: Nick Dyer <nick.dyer@itdev.co.uk>
On platforms which have multiple device instances using this driver, the
firmware may be different on each device. This patch makes the user give
the name of the firmware file when flashing.
This also prevents accidental triggering of the firmware load process.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 76ebb7cee971cb42dfb0a3a9224403b8b09abcf1)
[gdavis: Forward port and fix conflicts.]
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 43 ++++++++++++++++++++----
1 file changed, 37 insertions(+), 6 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index a54c595c76b9..ca317d267be1 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -33,8 +33,7 @@
#include <media/videobuf2-vmalloc.h>
#include <dt-bindings/input/atmel_mxt_ts.h>
-/* Firmware files */
-#define MXT_FW_NAME "maxtouch.fw"
+/* Configuration file */
#define MXT_CFG_NAME "maxtouch.cfg"
#define MXT_CFG_MAGIC "OBP_RAW V1"
@@ -335,6 +334,7 @@ struct mxt_data {
bool use_retrigen_workaround;
struct regulator *reg_vdd;
struct regulator *reg_avdd;
+ char *fw_name;
/* Cached parameters from object table */
u16 T5_address;
@@ -3203,7 +3203,7 @@ static int mxt_check_firmware_format(struct device *dev,
return -EINVAL;
}
-static int mxt_load_fw(struct device *dev, const char *fn)
+static int mxt_load_fw(struct device *dev)
{
struct mxt_data *data = dev_get_drvdata(dev);
const struct firmware *fw = NULL;
@@ -3213,9 +3213,9 @@ static int mxt_load_fw(struct device *dev, const char *fn)
unsigned int frame = 0;
int ret;
- ret = request_firmware(&fw, fn, dev);
+ ret = request_firmware(&fw, data->fw_name, dev);
if (ret) {
- dev_err(dev, "Unable to open firmware %s\n", fn);
+ dev_err(dev, "Unable to open firmware %s\n", data->fw_name);
return ret;
}
@@ -3335,6 +3335,33 @@ static int mxt_load_fw(struct device *dev, const char *fn)
return ret;
}
+static int mxt_update_file_name(struct device *dev, char **file_name,
+ const char *buf, size_t count)
+{
+ char *file_name_tmp;
+
+ /* Simple sanity check */
+ if (count > 64) {
+ dev_warn(dev, "File name too long\n");
+ return -EINVAL;
+ }
+
+ file_name_tmp = krealloc(*file_name, count + 1, GFP_KERNEL);
+ if (!file_name_tmp)
+ return -ENOMEM;
+
+ *file_name = file_name_tmp;
+ memcpy(*file_name, buf, count);
+
+ /* Echo into the sysfs entry may append newline at the end of buf */
+ if (buf[count - 1] == '\n')
+ (*file_name)[count - 1] = '\0';
+ else
+ (*file_name)[count] = '\0';
+
+ return 0;
+}
+
static ssize_t mxt_update_fw_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -3342,7 +3369,11 @@ static ssize_t mxt_update_fw_store(struct device *dev,
struct mxt_data *data = dev_get_drvdata(dev);
int error;
- error = mxt_load_fw(dev, MXT_FW_NAME);
+ error = mxt_update_file_name(dev, &data->fw_name, buf, count);
+ if (error)
+ return error;
+
+ error = mxt_load_fw(dev);
if (error) {
dev_err(dev, "The firmware update failed(%d)\n", error);
count = error;
--
2.19.2
^ permalink raw reply related
* [PATCH v1 14/63] Input: atmel_mxt_ts - report failures in suspend/resume
From: Jiada Wang @ 2019-08-16 8:31 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083218.18402-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit 93a57575403de4dd07cd64807d3c2ed7f2cca262)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[jiada: Fix compilation warning]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 51 ++++++++++++++++++------
1 file changed, 39 insertions(+), 12 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 907eebeff465..a54c595c76b9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3421,10 +3421,12 @@ static void mxt_reset_slots(struct mxt_data *data)
mxt_input_sync(data);
}
-static void mxt_start(struct mxt_data *data)
+static int mxt_start(struct mxt_data *data)
{
+ int ret = 0;
+
if (!data->suspended || data->in_bootloader)
- return;
+ return 0;
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
@@ -3449,28 +3451,42 @@ static void mxt_start(struct mxt_data *data)
*/
mxt_process_messages_until_invalid(data);
- mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+ ret = mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+ if (ret)
+ return ret;
/* Recalibrate since chip has been in deep sleep */
- mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+ ret = mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+ if (ret)
+ return ret;
+
+ ret = mxt_acquire_irq(data);
+ if (ret)
+ return ret;
- mxt_acquire_irq(data);
break;
}
data->suspended = false;
+
+ return 0;
}
-static void mxt_stop(struct mxt_data *data)
+static int mxt_stop(struct mxt_data *data)
{
+ int ret;
+
if (data->suspended || data->in_bootloader)
- return;
+ return 0;
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
/* Touch disable */
- mxt_write_object(data,
+ ret = mxt_write_object(data,
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
+ if (ret)
+ return ret;
+
break;
case MXT_SUSPEND_REGULATOR:
@@ -3483,29 +3499,40 @@ static void mxt_stop(struct mxt_data *data)
default:
disable_irq(data->irq);
- mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+ ret = mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+ if (ret)
+ return ret;
mxt_reset_slots(data);
break;
}
data->suspended = true;
+ return 0;
}
static int mxt_input_open(struct input_dev *dev)
{
struct mxt_data *data = input_get_drvdata(dev);
+ int ret;
- mxt_start(data);
+ ret = mxt_start(data);
- return 0;
+ if (ret)
+ dev_err(&data->client->dev, "%s failed rc=%d\n", __func__, ret);
+
+ return ret;
}
static void mxt_input_close(struct input_dev *dev)
{
struct mxt_data *data = input_get_drvdata(dev);
+ int ret;
- mxt_stop(data);
+ ret = mxt_stop(data);
+
+ if (ret)
+ dev_err(&data->client->dev, "%s failed rc=%d\n", __func__, ret);
}
static int mxt_parse_device_properties(struct mxt_data *data)
--
2.19.2
^ permalink raw reply related
* [PATCH v1 13/63] Input: atmel_mxt_ts - add regulator control support
From: Jiada Wang @ 2019-08-16 8:31 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083218.18402-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
Allow the driver to optionally manage enabling/disable power to the touch
controller itself. If the regulators are not present then use the deep
sleep power mode instead.
For a correct power on sequence, it is required that we have control over
the RESET line.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 14052b61bb66c2f2283c00e733e131be7a9b8bfc)
[gdavis: Resolve forward port conflicts due to v4.14-rc1 commmit
f657b00df22e ("Input: atmel_mxt_ts - add support for reset
line") and applying upstream commit 96a938aa214e ("Input:
atmel_mxt_ts - remove platform data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fixes from Dirk Behme:
- Input: atmel_mxt_ts - in failure case disable the regulator
- Input: atmel_mxt_ts - disable only enabled regulators
- Input: atmel_mxt_ts - use devm_regulator_get()]
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
---
Notes:
- Squash fixes by Dirk Behme:
+ Input: atmel_mxt_ts - in failure case disable the regulator
If the second regulator_enable(), disable the previously enabled
regulator, again.
+ Input: atmel_mxt_ts - disable only enabled regulators
As enabling the regulators in mxt_regulator_enable() might fail,
check if the regulators are really enabled and disable them only
in this case.
+ Input: atmel_mxt_ts - use devm_regulator_get()
Switch to devm_regulator_get() enabling us to drop the regulator_put()
in the remove function.
[jiada: Resolve forward port conflicts due to commit
5cecc2bccc03f ("Input: atmel_mxt_ts - fix
-Wunused-const-variable")]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
.../bindings/input/atmel,maxtouch.txt | 6 +
MAINTAINERS | 1 +
drivers/input/touchscreen/atmel_mxt_ts.c | 130 ++++++++++++++++--
include/dt-bindings/input/atmel_mxt_ts.h | 22 +++
4 files changed, 150 insertions(+), 9 deletions(-)
create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index c88919480d37..e28139ce3cae 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -31,6 +31,12 @@ Optional properties for main touchpad device:
- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+- atmel,suspend-mode: Select method used to suspend:
+ MXT_SUSPEND_DEEP_SLEEP - use T7 to suspend the device into deep sleep
+ MXT_SUSPEND_T9_CTRL - use T9.CTRL to turn off touch processing
+ MXT_SUSPEND_REGULATOR - use regulators to power down device during suspend
+ Definitions are in <dt-bindings/input/atmel_mxt_ts.h>.
+
Example:
touch@4b {
diff --git a/MAINTAINERS b/MAINTAINERS
index 47800d32cfbc..1509bb9072fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2777,6 +2777,7 @@ T: git git://github.com/ndyer/linux.git
S: Maintained
F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
F: drivers/input/touchscreen/atmel_mxt_ts.c
+F: include/dt-bindings/input/atmel_mxt_ts.h
ATMEL WIRELESS DRIVER
M: Simon Kelley <simon@thekelleys.org.uk>
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 515882df5509..907eebeff465 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -26,10 +26,12 @@
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <asm/unaligned.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-vmalloc.h>
+#include <dt-bindings/input/atmel_mxt_ts.h>
/* Firmware files */
#define MXT_FW_NAME "maxtouch.fw"
@@ -215,6 +217,9 @@ enum t100_type {
#define MXT_CRC_TIMEOUT 1000 /* msec */
#define MXT_FW_RESET_TIME 3000 /* msec */
#define MXT_FW_CHG_TIMEOUT 300 /* msec */
+#define MXT_REGULATOR_DELAY 150 /* msec */
+#define MXT_CHG_DELAY 100 /* msec */
+#define MXT_POWERON_DELAY 150 /* msec */
/* Command to unlock bootloader */
#define MXT_UNLOCK_CMD_MSB 0xaa
@@ -275,11 +280,6 @@ enum v4l_dbg_inputs {
MXT_V4L_INPUT_MAX,
};
-enum mxt_suspend_mode {
- MXT_SUSPEND_DEEP_SLEEP = 0,
- MXT_SUSPEND_T9_CTRL = 1,
-};
-
/* Config update context */
struct mxt_cfg {
u8 *raw;
@@ -333,6 +333,8 @@ struct mxt_data {
u8 stylus_aux_pressure;
u8 stylus_aux_peak;
bool use_retrigen_workaround;
+ struct regulator *reg_vdd;
+ struct regulator *reg_avdd;
/* Cached parameters from object table */
u16 T5_address;
@@ -2070,6 +2072,94 @@ static int mxt_read_info_block(struct mxt_data *data)
return error;
}
+static void mxt_regulator_enable(struct mxt_data *data)
+{
+ int error;
+
+ if (!data->reg_vdd || !data->reg_avdd)
+ return;
+
+ gpiod_set_value(data->reset_gpio, 0);
+
+ error = regulator_enable(data->reg_vdd);
+ if (error)
+ return;
+
+ error = regulator_enable(data->reg_avdd);
+ if (error) {
+ regulator_disable(data->reg_vdd);
+ return;
+ }
+
+ /*
+ * According to maXTouch power sequencing specification, RESET line
+ * must be kept low until some time after regulators come up to
+ * voltage
+ */
+ msleep(MXT_REGULATOR_DELAY);
+ gpiod_set_value(data->reset_gpio, 1);
+ msleep(MXT_CHG_DELAY);
+
+retry_wait:
+ reinit_completion(&data->bl_completion);
+ data->in_bootloader = true;
+ error = mxt_wait_for_completion(data, &data->bl_completion,
+ MXT_POWERON_DELAY);
+ if (error == -EINTR)
+ goto retry_wait;
+
+ data->in_bootloader = false;
+}
+
+static void mxt_regulator_disable(struct mxt_data *data)
+{
+ if (!data->reg_vdd || !data->reg_avdd)
+ return;
+
+ if (regulator_is_enabled(data->reg_vdd))
+ regulator_disable(data->reg_vdd);
+ if (regulator_is_enabled(data->reg_avdd))
+ regulator_disable(data->reg_avdd);
+}
+
+static int mxt_probe_regulators(struct mxt_data *data)
+{
+ struct device *dev = &data->client->dev;
+ int error;
+
+ /* Must have reset GPIO to use regulator support */
+ if (!data->reset_gpio) {
+ error = -EINVAL;
+ goto fail;
+ }
+
+ data->reg_vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(data->reg_vdd)) {
+ error = PTR_ERR(data->reg_vdd);
+ dev_err(dev, "Error %d getting vdd regulator\n", error);
+ goto fail;
+ }
+
+ data->reg_avdd = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(data->reg_avdd)) {
+ error = PTR_ERR(data->reg_avdd);
+ dev_err(dev, "Error %d getting avdd regulator\n", error);
+ goto fail_release;
+ }
+
+ mxt_regulator_enable(data);
+
+ dev_dbg(dev, "Initialised regulators\n");
+ return 0;
+
+fail_release:
+ regulator_put(data->reg_vdd);
+fail:
+ data->reg_vdd = NULL;
+ data->reg_avdd = NULL;
+ return error;
+}
+
static int mxt_read_t9_resolution(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -3135,7 +3225,12 @@ static int mxt_load_fw(struct device *dev, const char *fn)
goto release_firmware;
if (data->suspended) {
- enable_irq(data->irq);
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR)
+ mxt_regulator_enable(data);
+
+ if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP)
+ enable_irq(data->irq);
+
data->suspended = false;
}
@@ -3341,6 +3436,11 @@ static void mxt_start(struct mxt_data *data)
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
break;
+ case MXT_SUSPEND_REGULATOR:
+ enable_irq(data->irq);
+ mxt_regulator_enable(data);
+ break;
+
case MXT_SUSPEND_DEEP_SLEEP:
default:
/*
@@ -3373,6 +3473,12 @@ static void mxt_stop(struct mxt_data *data)
MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
break;
+ case MXT_SUSPEND_REGULATOR:
+ disable_irq(data->irq);
+ mxt_regulator_disable(data);
+ mxt_reset_slots(data);
+ break;
+
case MXT_SUSPEND_DEEP_SLEEP:
default:
disable_irq(data->irq);
@@ -3437,6 +3543,8 @@ static int mxt_parse_device_properties(struct mxt_data *data)
data->t19_num_keys = n_keys;
}
+ device_property_read_u32(dev, "atmel,suspend-mode", &data->suspend_mode);
+
return 0;
}
@@ -3523,14 +3631,18 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
return error;
}
- disable_irq(client->irq);
-
- if (data->reset_gpio) {
+ if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
+ error = mxt_probe_regulators(data);
+ if (error)
+ return error;
+ } else if (data->reset_gpio) {
msleep(MXT_RESET_GPIO_TIME);
gpiod_set_value(data->reset_gpio, 1);
msleep(MXT_RESET_INVALID_CHG);
}
+ disable_irq(data->irq);
+
error = sysfs_create_group(&client->dev.kobj, &mxt_fw_attr_group);
if (error) {
dev_err(&client->dev, "Failure %d creating fw sysfs group\n",
diff --git a/include/dt-bindings/input/atmel_mxt_ts.h b/include/dt-bindings/input/atmel_mxt_ts.h
new file mode 100644
index 000000000000..e4c4c0f6fa37
--- /dev/null
+++ b/include/dt-bindings/input/atmel_mxt_ts.h
@@ -0,0 +1,22 @@
+/*
+ * Atmel maXTouch Touchscreen driver
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ * Author: Nick Dyer <nick.dyer@itdev.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_ATMEL_MXT_TS_H
+#define __DT_BINDINGS_ATMEL_MXT_TS_H
+
+enum mxt_suspend_mode {
+ MXT_SUSPEND_DEEP_SLEEP = 0,
+ MXT_SUSPEND_T9_CTRL = 1,
+ MXT_SUSPEND_REGULATOR = 2,
+};
+
+#endif /* __DT_BINDINGS_ATMEL_MXT_TS_H */
--
2.19.2
^ permalink raw reply related
* [PATCH v1 12/63] Input: atmel_mxt_ts - release touch state during suspend
From: Jiada Wang @ 2019-08-16 8:31 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083218.18402-1-jiada_wang@mentor.com>
From: Nick Dyer <nick.dyer@itdev.co.uk>
If fingers are down as the MXT chip goes into suspend it does not send a
lift message. In addition, it may not complete its final measurement cycle
immediately, which means touch messages may be received by the interrupt
handler after mxt_stop() has completed.
So:
- disable irq during suspend
- flush any messages created after suspend
- tell app layer that slots were released at suspend
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 26794433086dbc7dea18d2f6a1c8d61ab25bcfda)
[gdavis: Resolve forward port conflicts due to applying upstream
commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform
data support").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[gdavis: Squash fix from Dirk Behme:
- Input: atmel_mxt_ts - remove superfluous data->suspended]
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
---
Notes:
- Squash fix from Dirk Behme:
+ Input: atmel_mxt_ts - remove superfluous data->suspended
data->suspended is already set to false in mxt_load_fw(), so it's not
needed here.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 52 ++++++++++++++++++++++--
1 file changed, 49 insertions(+), 3 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 8f7e1aa01f39..515882df5509 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -372,6 +372,9 @@ struct mxt_data {
unsigned int t19_num_keys;
enum mxt_suspend_mode suspend_mode;
+
+ /* Indicates whether device is in suspend */
+ bool suspended;
};
struct mxt_vb2_buffer {
@@ -1150,10 +1153,10 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
mxt_proc_t42_messages(data, message);
} else if (report_id == data->T48_reportid) {
mxt_proc_t48_messages(data, message);
- } else if (!data->input_dev) {
+ } else if (!data->input_dev || data->suspended) {
/*
- * Do not report events if input device
- * is not yet registered.
+ * Do not report events if input device is not
+ * yet registered or returning from suspend
*/
mxt_dump_message(data, message);
} else if (report_id >= data->T9_reportid_min &&
@@ -3131,6 +3134,11 @@ static int mxt_load_fw(struct device *dev, const char *fn)
if (ret)
goto release_firmware;
+ if (data->suspended) {
+ enable_irq(data->irq);
+ data->suspended = false;
+ }
+
if (!data->in_bootloader) {
/* Change to the bootloader mode */
data->in_bootloader = true;
@@ -3302,8 +3310,27 @@ static void mxt_sysfs_remove(struct mxt_data *data)
sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
}
+static void mxt_reset_slots(struct mxt_data *data)
+{
+ struct input_dev *input_dev = data->input_dev;
+ int id;
+
+ if (!input_dev)
+ return;
+
+ for (id = 0; id < data->num_touchids; id++) {
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
+ }
+
+ mxt_input_sync(data);
+}
+
static void mxt_start(struct mxt_data *data)
{
+ if (!data->suspended || data->in_bootloader)
+ return;
+
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
mxt_soft_reset(data);
@@ -3316,16 +3343,29 @@ static void mxt_start(struct mxt_data *data)
case MXT_SUSPEND_DEEP_SLEEP:
default:
+ /*
+ * Discard any touch messages still in message buffer
+ * from before chip went to sleep
+ */
+ mxt_process_messages_until_invalid(data);
+
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
/* Recalibrate since chip has been in deep sleep */
mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+
+ mxt_acquire_irq(data);
break;
}
+
+ data->suspended = false;
}
static void mxt_stop(struct mxt_data *data)
{
+ if (data->suspended || data->in_bootloader)
+ return;
+
switch (data->suspend_mode) {
case MXT_SUSPEND_T9_CTRL:
/* Touch disable */
@@ -3335,9 +3375,15 @@ static void mxt_stop(struct mxt_data *data)
case MXT_SUSPEND_DEEP_SLEEP:
default:
+ disable_irq(data->irq);
+
mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+
+ mxt_reset_slots(data);
break;
}
+
+ data->suspended = true;
}
static int mxt_input_open(struct input_dev *dev)
--
2.19.2
^ permalink raw reply related
* [PATCH v1 11/63] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs
From: Jiada Wang @ 2019-08-16 8:31 UTC (permalink / raw)
To: nick, dmitry.torokhov; +Cc: linux-input, linux-kernel, jiada_wang, george_davis
In-Reply-To: <20190816083218.18402-1-jiada_wang@mentor.com>
From: Karl Tsou <karl.funlab@gmail.com>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
(cherry picked from ndyer/linux/for-upstream commit cb98986f8342107bf4a536aed4160b20839e97c1)
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 40 ++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 482d435c80ea..8f7e1aa01f39 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -71,6 +71,8 @@
#define MXT_SPT_MESSAGECOUNT_T44 44
#define MXT_SPT_CTECONFIG_T46 46
#define MXT_SPT_DYNAMICCONFIGURATIONCONTAINER_T71 71
+#define MXT_PROCI_SYMBOLGESTUREPROCESSOR 92
+#define MXT_PROCI_TOUCHSEQUENCELOGGER 93
#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
#define MXT_PROCI_ACTIVESTYLUS_T107 107
@@ -349,6 +351,10 @@ struct mxt_data {
u8 T42_reportid_max;
u16 T44_address;
u8 T48_reportid;
+ u16 T92_address;
+ u8 T92_reportid;
+ u16 T93_address;
+ u8 T93_reportid;
u8 T100_reportid_min;
u8 T100_reportid_max;
u16 T107_address;
@@ -1112,6 +1118,24 @@ static int mxt_proc_t48_messages(struct mxt_data *data, u8 *msg)
return 0;
}
+static void mxt_proc_t92_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status = msg[1];
+
+ dev_info(dev, "T92 long stroke LSTR=%d %d\n",
+ (status & 0x80) ? 1 : 0,
+ status & 0x0F);
+}
+
+static void mxt_proc_t93_messages(struct mxt_data *data, u8 *msg)
+{
+ struct device *dev = &data->client->dev;
+ u8 status = msg[1];
+
+ dev_info(dev, "T93 report double tap %d\n", status);
+}
+
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
@@ -1144,6 +1168,10 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message)
} else if (report_id >= data->T15_reportid_min
&& report_id <= data->T15_reportid_max) {
mxt_proc_t15_messages(data, message);
+ } else if (report_id == data->T92_reportid) {
+ mxt_proc_t92_messages(data, message);
+ } else if (report_id == data->T93_reportid) {
+ mxt_proc_t93_messages(data, message);
} else {
mxt_dump_message(data, message);
}
@@ -1811,6 +1839,10 @@ static void mxt_free_object_table(struct mxt_data *data)
data->T42_reportid_max = 0;
data->T44_address = 0;
data->T48_reportid = 0;
+ data->T92_reportid = 0;
+ data->T92_address = 0;
+ data->T93_reportid = 0;
+ data->T93_address = 0;
data->T100_reportid_min = 0;
data->T100_reportid_max = 0;
data->max_reportid = 0;
@@ -1903,6 +1935,14 @@ static int mxt_parse_object_table(struct mxt_data *data,
case MXT_PROCG_NOISESUPPRESSION_T48:
data->T48_reportid = min_id;
break;
+ case MXT_PROCI_SYMBOLGESTUREPROCESSOR:
+ data->T92_reportid = min_id;
+ data->T92_address = object->start_address;
+ break;
+ case MXT_PROCI_TOUCHSEQUENCELOGGER:
+ data->T93_reportid = min_id;
+ data->T93_address = object->start_address;
+ break;
case MXT_TOUCH_MULTITOUCHSCREEN_T100:
data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
data->T100_reportid_min = min_id;
--
2.19.2
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox