* [PATCH v5 15/17] HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Basavaraj Natikar, Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
From: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Current amd_sfh driver has float_to_int() to convert units from
float to int. This is fine until this function gets called outside of
the current scope of file.
Add a prefix "amd_sfh" to float_to_int() so that function represents
the driver name. This function will be called by multiple callers in the
next patch.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
---
drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c | 28 ++++++++++---------
.../amd-sfh-hid/sfh1_1/amd_sfh_interface.h | 1 +
2 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c
index 8a037de08e92..33fbdde8aff0 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c
@@ -132,7 +132,7 @@ static void get_common_inputs(struct common_input_property *common, int report_i
common->event_type = HID_USAGE_SENSOR_EVENT_DATA_UPDATED_ENUM;
}
-static int float_to_int(u32 flt32_val)
+int amd_sfh_float_to_int(u32 flt32_val)
{
int fraction, shift, mantissa, sign, exp, zeropre;
@@ -201,9 +201,9 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id,
OFFSET_SENSOR_DATA_DEFAULT;
memcpy_fromio(&accel_data, sensoraddr, sizeof(struct sfh_accel_data));
get_common_inputs(&acc_input.common_property, report_id);
- acc_input.in_accel_x_value = float_to_int(accel_data.acceldata.x) / 100;
- acc_input.in_accel_y_value = float_to_int(accel_data.acceldata.y) / 100;
- acc_input.in_accel_z_value = float_to_int(accel_data.acceldata.z) / 100;
+ acc_input.in_accel_x_value = amd_sfh_float_to_int(accel_data.acceldata.x) / 100;
+ acc_input.in_accel_y_value = amd_sfh_float_to_int(accel_data.acceldata.y) / 100;
+ acc_input.in_accel_z_value = amd_sfh_float_to_int(accel_data.acceldata.z) / 100;
memcpy(input_report, &acc_input, sizeof(acc_input));
report_size = sizeof(acc_input);
break;
@@ -212,9 +212,9 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id,
OFFSET_SENSOR_DATA_DEFAULT;
memcpy_fromio(&gyro_data, sensoraddr, sizeof(struct sfh_gyro_data));
get_common_inputs(&gyro_input.common_property, report_id);
- gyro_input.in_angel_x_value = float_to_int(gyro_data.gyrodata.x) / 1000;
- gyro_input.in_angel_y_value = float_to_int(gyro_data.gyrodata.y) / 1000;
- gyro_input.in_angel_z_value = float_to_int(gyro_data.gyrodata.z) / 1000;
+ gyro_input.in_angel_x_value = amd_sfh_float_to_int(gyro_data.gyrodata.x) / 1000;
+ gyro_input.in_angel_y_value = amd_sfh_float_to_int(gyro_data.gyrodata.y) / 1000;
+ gyro_input.in_angel_z_value = amd_sfh_float_to_int(gyro_data.gyrodata.z) / 1000;
memcpy(input_report, &gyro_input, sizeof(gyro_input));
report_size = sizeof(gyro_input);
break;
@@ -223,9 +223,9 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id,
OFFSET_SENSOR_DATA_DEFAULT;
memcpy_fromio(&mag_data, sensoraddr, sizeof(struct sfh_mag_data));
get_common_inputs(&magno_input.common_property, report_id);
- magno_input.in_magno_x = float_to_int(mag_data.magdata.x) / 100;
- magno_input.in_magno_y = float_to_int(mag_data.magdata.y) / 100;
- magno_input.in_magno_z = float_to_int(mag_data.magdata.z) / 100;
+ magno_input.in_magno_x = amd_sfh_float_to_int(mag_data.magdata.x) / 100;
+ magno_input.in_magno_y = amd_sfh_float_to_int(mag_data.magdata.y) / 100;
+ magno_input.in_magno_z = amd_sfh_float_to_int(mag_data.magdata.z) / 100;
magno_input.in_magno_accuracy = mag_data.accuracy / 100;
memcpy(input_report, &magno_input, sizeof(magno_input));
report_size = sizeof(magno_input);
@@ -235,13 +235,15 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id,
OFFSET_SENSOR_DATA_DEFAULT;
memcpy_fromio(&als_data, sensoraddr, sizeof(struct sfh_als_data));
get_common_inputs(&als_input.common_property, report_id);
- als_input.illuminance_value = float_to_int(als_data.lux);
+ als_input.illuminance_value = amd_sfh_float_to_int(als_data.lux);
memcpy_fromio(&binfo, mp2->vsbase, sizeof(struct sfh_base_info));
if (binfo.sbase.s_prop[ALS_IDX].sf.feat & 0x2) {
als_input.light_color_temp = als_data.light_color_temp;
- als_input.chromaticity_x_value = float_to_int(als_data.chromaticity_x);
- als_input.chromaticity_y_value = float_to_int(als_data.chromaticity_y);
+ als_input.chromaticity_x_value =
+ amd_sfh_float_to_int(als_data.chromaticity_x);
+ als_input.chromaticity_y_value =
+ amd_sfh_float_to_int(als_data.chromaticity_y);
}
report_size = sizeof(als_input);
diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h
index 656c3e95ef8c..75267b0fec70 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h
@@ -166,4 +166,5 @@ struct hpd_status {
void sfh_interface_init(struct amd_mp2_dev *mp2);
void amd_sfh1_1_set_desc_ops(struct amd_mp2_ops *mp2_ops);
+int amd_sfh_float_to_int(u32 flt32_val);
#endif
--
2.25.1
^ permalink raw reply related
* [PATCH v5 14/17] platform/x86/amd/pmf: Add PMF-AMDGPU set interface
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
For the Smart PC Solution to fully work, it has to enact to the actions
coming from TA. Add the initial code path for set interface to AMDGPU.
Change amd_pmf_apply_policies() return type, so that it can return
errors when the call to retrieve information from amdgpu fails.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/pmf.h | 2 ++
drivers/platform/x86/amd/pmf/tee-if.c | 39 +++++++++++++++++++++++++--
2 files changed, 39 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index 525308519fa3..6e680637a631 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -78,6 +78,7 @@
#define PMF_POLICY_STT_SKINTEMP_APU 7
#define PMF_POLICY_STT_SKINTEMP_HS2 8
#define PMF_POLICY_SYSTEM_STATE 9
+#define PMF_POLICY_DISPLAY_BRIGHTNESS 12
#define PMF_POLICY_P3T 38
/* TA macros */
@@ -503,6 +504,7 @@ enum ta_pmf_error_type {
};
struct pmf_action_table {
+ unsigned long display_brightness;
enum system_state system_state;
u32 spl; /* in mW */
u32 sppt; /* in mW */
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index 82ee2b1c627f..94a2afd84b56 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -77,8 +77,10 @@ static int amd_pmf_update_uevents(struct amd_pmf_dev *dev, u16 event)
return 0;
}
-static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_result *out)
+static int amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_result *out)
{
+ struct thermal_cooling_device *cdev = dev->gfx_data.cooling_dev;
+ unsigned long state;
u32 val;
int idx;
@@ -154,8 +156,21 @@ static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_
dev_dbg(dev->dev, "update SYSTEM_STATE: %s\n",
amd_pmf_uevent_as_str(val));
break;
+
+ case PMF_POLICY_DISPLAY_BRIGHTNESS:
+ if (!dev->drm_dev)
+ return -ENODEV;
+
+ cdev->ops->get_cur_state(cdev, &state);
+ if (state != val) {
+ cdev->ops->set_cur_state(cdev, val);
+ dev_dbg(dev->dev, "update DISPLAY_BRIGHTNESS: %u\n", val);
+ }
+ break;
}
}
+
+ return 0;
}
static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
@@ -192,7 +207,9 @@ static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
amd_pmf_dump_ta_inputs(dev, in);
dev_dbg(dev->dev, "action count:%u result:%x\n", out->actions_count,
ta_sm->pmf_result);
- amd_pmf_apply_policies(dev, out);
+ ret = amd_pmf_apply_policies(dev, out);
+ if (ret)
+ return ret;
}
return 0;
@@ -423,6 +440,23 @@ static void amd_pmf_tee_deinit(struct amd_pmf_dev *dev)
tee_client_close_context(dev->tee_ctx);
}
+static int amd_pmf_gpu_set_cur_state(struct thermal_cooling_device *cooling_dev,
+ unsigned long state)
+{
+ struct backlight_device *bd;
+
+ if (acpi_video_get_backlight_type() != acpi_backlight_native)
+ return -ENODEV;
+
+ bd = backlight_device_get_by_type(BACKLIGHT_RAW);
+ if (!bd)
+ return -ENODEV;
+
+ backlight_device_set_brightness(bd, state);
+
+ return 0;
+}
+
static int amd_pmf_gpu_get_cur_state(struct thermal_cooling_device *cooling_dev,
unsigned long *state)
{
@@ -463,6 +497,7 @@ static int amd_pmf_gpu_get_max_state(struct thermal_cooling_device *cooling_dev,
static const struct thermal_cooling_device_ops bd_cooling_ops = {
.get_max_state = amd_pmf_gpu_get_max_state,
.get_cur_state = amd_pmf_gpu_get_cur_state,
+ .set_cur_state = amd_pmf_gpu_set_cur_state,
};
static int amd_pmf_get_gpu_handle(struct pci_dev *pdev, void *data)
--
2.25.1
^ permalink raw reply related
* [PATCH v5 13/17] platform/x86/amd/pmf: Add PMF-AMDGPU get interface
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
In order to provide GPU inputs to TA for the Smart PC solution to work, we
need to have interface between the PMF driver and the AMDGPU driver.
Add the initial code path for get interface from AMDGPU.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/core.c | 3 +-
drivers/platform/x86/amd/pmf/pmf.h | 18 +++++++
drivers/platform/x86/amd/pmf/spc.c | 41 ++++++++++++++
drivers/platform/x86/amd/pmf/tee-if.c | 77 +++++++++++++++++++++++++++
4 files changed, 138 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c
index 4b8156033fa6..9b14a997cd48 100644
--- a/drivers/platform/x86/amd/pmf/core.c
+++ b/drivers/platform/x86/amd/pmf/core.c
@@ -411,6 +411,7 @@ static int amd_pmf_probe(struct platform_device *pdev)
}
dev->cpu_id = rdev->device;
+ dev->root = rdev;
err = amd_smn_read(0, AMD_PMF_BASE_ADDR_LO, &val);
if (err) {
@@ -482,4 +483,4 @@ module_platform_driver(amd_pmf_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AMD Platform Management Framework Driver");
-MODULE_SOFTDEP("pre: amdtee");
+MODULE_SOFTDEP("pre: amdtee amdgpu");
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index 8712299ad52b..525308519fa3 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -11,7 +11,11 @@
#ifndef PMF_H
#define PMF_H
+#include <acpi/video.h>
+#include <drm/drm_connector.h>
#include <linux/acpi.h>
+#include <linux/backlight.h>
+#include <linux/pci.h>
#include <linux/platform_profile.h>
#define POLICY_BUF_MAX_SZ 0x4b000
@@ -83,6 +87,8 @@
#define TA_OUTPUT_RESERVED_MEM 906
#define MAX_OPERATION_PARAMS 4
+#define MAX_SUPPORTED_DISPLAY 4
+
/* AMD PMF BIOS interfaces */
struct apmf_verify_interface {
u16 size;
@@ -194,6 +200,15 @@ enum power_modes {
POWER_MODE_MAX,
};
+struct amd_gpu_pmf_data {
+ struct pci_dev *gpu_dev;
+ struct backlight_device *raw_bd;
+ struct thermal_cooling_device *cooling_dev;
+ enum drm_connector_status con_status[MAX_SUPPORTED_DISPLAY];
+ int display_count;
+ int connector_type[MAX_SUPPORTED_DISPLAY];
+};
+
struct amd_pmf_dev {
void __iomem *regbase;
void __iomem *smu_virt_addr;
@@ -228,9 +243,12 @@ struct amd_pmf_dev {
void *shbuf;
struct delayed_work pb_work;
struct pmf_action_table *prev_data;
+ struct amd_gpu_pmf_data gfx_data;
u64 policy_addr;
void *policy_base;
bool smart_pc_enabled;
+ struct pci_dev *root;
+ struct drm_device *drm_dev;
};
struct apmf_sps_prop_granular {
diff --git a/drivers/platform/x86/amd/pmf/spc.c b/drivers/platform/x86/amd/pmf/spc.c
index 959146fd483f..47ec563088b8 100644
--- a/drivers/platform/x86/amd/pmf/spc.c
+++ b/drivers/platform/x86/amd/pmf/spc.c
@@ -44,6 +44,10 @@ void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *
dev_dbg(dev->dev, "Max C0 Residency: %u\n", in->ev_info.max_c0residency);
dev_dbg(dev->dev, "GFX Busy: %u\n", in->ev_info.gfx_busy);
dev_dbg(dev->dev, "Connected Display Count: %u\n", in->ev_info.monitor_count);
+ dev_dbg(dev->dev, "Primary Display Type: %s\n",
+ drm_get_connector_type_name(in->ev_info.display_type));
+ dev_dbg(dev->dev, "Primary Display State: %s\n", in->ev_info.display_state ?
+ "Connected" : "disconnected/unknown");
dev_dbg(dev->dev, "LID State: %s\n", in->ev_info.lid_state ? "close" : "open");
dev_dbg(dev->dev, "==== TA inputs END ====\n");
}
@@ -146,6 +150,41 @@ static int amd_pmf_get_slider_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_
return 0;
}
+static int amd_pmf_get_gfx_data(struct amd_pmf_dev *pmf)
+{
+ struct drm_connector_list_iter iter;
+ struct drm_connector *connector;
+ int i = 0;
+
+ /* Reset the count to zero */
+ pmf->gfx_data.display_count = 0;
+
+ drm_connector_list_iter_begin(pmf->drm_dev, &iter);
+ drm_for_each_connector_iter(connector, &iter) {
+ if (connector->status == connector_status_connected)
+ pmf->gfx_data.display_count++;
+ if (connector->status != pmf->gfx_data.con_status[i])
+ pmf->gfx_data.con_status[i] = connector->status;
+ if (connector->connector_type != pmf->gfx_data.connector_type[i])
+ pmf->gfx_data.connector_type[i] = connector->connector_type;
+
+ i++;
+ if (i >= MAX_SUPPORTED_DISPLAY)
+ break;
+ }
+ drm_connector_list_iter_end(&iter);
+
+ return 0;
+}
+
+static void amd_pmf_get_gpu_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
+{
+ amd_pmf_get_gfx_data(dev);
+ in->ev_info.monitor_count = dev->gfx_data.display_count;
+ in->ev_info.display_type = dev->gfx_data.connector_type[0];
+ in->ev_info.display_state = dev->gfx_data.con_status[0];
+}
+
void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
{
/* TA side lid open is 1 and close is 0, hence the ! here */
@@ -154,4 +193,6 @@ void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_tab
amd_pmf_get_smu_info(dev, in);
amd_pmf_get_battery_info(dev, in);
amd_pmf_get_slider_info(dev, in);
+ if (dev->drm_dev)
+ amd_pmf_get_gpu_info(dev, in);
}
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index 81b1bd356e83..82ee2b1c627f 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -10,6 +10,7 @@
#include <linux/debugfs.h>
#include <linux/tee_drv.h>
+#include <linux/thermal.h>
#include <linux/uuid.h>
#include "pmf.h"
@@ -422,6 +423,60 @@ static void amd_pmf_tee_deinit(struct amd_pmf_dev *dev)
tee_client_close_context(dev->tee_ctx);
}
+static int amd_pmf_gpu_get_cur_state(struct thermal_cooling_device *cooling_dev,
+ unsigned long *state)
+{
+ struct backlight_device *bd;
+
+ if (acpi_video_get_backlight_type() != acpi_backlight_native)
+ return -ENODEV;
+
+ bd = backlight_device_get_by_type(BACKLIGHT_RAW);
+ if (!bd)
+ return -ENODEV;
+
+ *state = backlight_get_brightness(bd);
+
+ return 0;
+}
+
+static int amd_pmf_gpu_get_max_state(struct thermal_cooling_device *cooling_dev,
+ unsigned long *state)
+{
+ struct backlight_device *bd;
+
+ if (acpi_video_get_backlight_type() != acpi_backlight_native)
+ return -ENODEV;
+
+ bd = backlight_device_get_by_type(BACKLIGHT_RAW);
+ if (!bd)
+ return -ENODEV;
+
+ if (backlight_is_blank(bd))
+ *state = 0;
+ else
+ *state = bd->props.max_brightness;
+
+ return 0;
+}
+
+static const struct thermal_cooling_device_ops bd_cooling_ops = {
+ .get_max_state = amd_pmf_gpu_get_max_state,
+ .get_cur_state = amd_pmf_gpu_get_cur_state,
+};
+
+static int amd_pmf_get_gpu_handle(struct pci_dev *pdev, void *data)
+{
+ struct amd_pmf_dev *dev = data;
+
+ if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->devfn == 0) {
+ dev->gfx_data.gpu_dev = pdev;
+ return 1; /* Stop walking */
+ }
+
+ return 0; /* Continue walking */
+}
+
int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
{
int ret;
@@ -433,10 +488,30 @@ int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
INIT_DELAYED_WORK(&dev->pb_work, amd_pmf_invoke_cmd);
amd_pmf_set_dram_addr(dev);
amd_pmf_get_bios_buffer(dev);
+
dev->prev_data = kzalloc(sizeof(*dev->prev_data), GFP_KERNEL);
if (!dev->prev_data)
return -ENOMEM;
+ pci_walk_bus(dev->root->bus, amd_pmf_get_gpu_handle, dev);
+ if (dev->gfx_data.gpu_dev) {
+ dev->drm_dev = pci_get_drvdata(dev->gfx_data.gpu_dev);
+ if (!dev->drm_dev)
+ return -EINVAL;
+
+ if (acpi_video_get_backlight_type() != acpi_backlight_native)
+ return -ENODEV;
+
+ dev->gfx_data.raw_bd = backlight_device_get_by_type(BACKLIGHT_RAW);
+ if (!dev->gfx_data.raw_bd)
+ return -ENODEV;
+
+ dev->gfx_data.cooling_dev = thermal_cooling_device_register("pmf_gpu_bd",
+ NULL, &bd_cooling_ops);
+ if (IS_ERR(dev->gfx_data.cooling_dev))
+ return -ENODEV;
+ }
+
return dev->smart_pc_enabled;
}
@@ -448,5 +523,7 @@ void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev)
kfree(dev->prev_data);
kfree(dev->policy_buf);
cancel_delayed_work_sync(&dev->pb_work);
+ if (dev->gfx_data.cooling_dev)
+ thermal_cooling_device_unregister(dev->gfx_data.cooling_dev);
amd_pmf_tee_deinit(dev);
}
--
2.25.1
^ permalink raw reply related
* [PATCH v5 12/17] platform/x86/amd/pmf: dump policy binary data
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
Sometimes policy binary retrieved from the BIOS maybe incorrect that can
end up in failing to enable the Smart PC solution feature.
Use print_hex_dump_debug() to dump the policy binary in hex, so that we
debug the issues related to the binary even before sending that to TA.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/tee-if.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index f73663c629fe..81b1bd356e83 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -276,6 +276,12 @@ static int amd_pmf_start_policy_engine(struct amd_pmf_dev *dev)
}
#ifdef CONFIG_AMD_PMF_DEBUG
+static void amd_pmf_hex_dump_pb(struct amd_pmf_dev *dev)
+{
+ print_hex_dump_debug("(pb): ", DUMP_PREFIX_OFFSET, 16, 1, dev->policy_buf,
+ dev->policy_sz, false);
+}
+
static ssize_t amd_pmf_get_pb_data(struct file *filp, const char __user *buf,
size_t length, loff_t *pos)
{
@@ -290,6 +296,7 @@ static ssize_t amd_pmf_get_pb_data(struct file *filp, const char __user *buf,
if (copy_from_user(dev->policy_buf, buf, dev->policy_sz))
return -EFAULT;
+ amd_pmf_hex_dump_pb(dev);
ret = amd_pmf_start_policy_engine(dev);
if (ret)
return -EINVAL;
@@ -315,6 +322,7 @@ static void amd_pmf_remove_pb(struct amd_pmf_dev *dev)
#else
static void amd_pmf_open_pb(struct amd_pmf_dev *dev, struct dentry *debugfs_root) {}
static void amd_pmf_remove_pb(struct amd_pmf_dev *dev) {}
+static void amd_pmf_hex_dump_pb(struct amd_pmf_dev *dev) {}
#endif
static int amd_pmf_get_bios_buffer(struct amd_pmf_dev *dev)
@@ -329,6 +337,7 @@ static int amd_pmf_get_bios_buffer(struct amd_pmf_dev *dev)
memcpy(dev->policy_buf, dev->policy_base, dev->policy_sz);
+ amd_pmf_hex_dump_pb(dev);
if (pb_side_load)
amd_pmf_open_pb(dev, dev->dbgfs_dir);
--
2.25.1
^ permalink raw reply related
* [PATCH v5 11/17] platform/x86/amd/pmf: Add capability to sideload of policy binary
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
A policy binary is OS agnostic, and the same policies are expected to work
across the OSes. At times it becomes difficult to debug when the policies
inside the policy binaries starts to misbehave. Add a way to sideload such
policies independently to debug them via a debugfs entry.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/pmf.h | 1 +
drivers/platform/x86/amd/pmf/tee-if.c | 54 +++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index 593930519039..8712299ad52b 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -219,6 +219,7 @@ struct amd_pmf_dev {
bool cnqf_supported;
struct notifier_block pwr_src_notifier;
/* Smart PC solution builder */
+ struct dentry *esbin;
unsigned char *policy_buf;
u32 policy_sz;
struct tee_context *tee_ctx;
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index 5f10e5c6335e..f73663c629fe 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -8,6 +8,7 @@
* Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
*/
+#include <linux/debugfs.h>
#include <linux/tee_drv.h>
#include <linux/uuid.h>
#include "pmf.h"
@@ -16,9 +17,14 @@
/* Policy binary actions sampling frequency (in ms) */
static int pb_actions_ms = MSEC_PER_SEC;
+/* Sideload policy binaries to debug policy failures */
+static bool pb_side_load;
+
#ifdef CONFIG_AMD_PMF_DEBUG
module_param(pb_actions_ms, int, 0644);
MODULE_PARM_DESC(pb_actions_ms, "Policy binary actions sampling frequency (default = 1000ms)");
+module_param(pb_side_load, bool, 0444);
+MODULE_PARM_DESC(pb_side_load, "Sideload policy binaries debug policy failures");
#endif
static const uuid_t amd_pmf_ta_uuid = UUID_INIT(0x6fd93b77, 0x3fb8, 0x524d,
@@ -269,6 +275,48 @@ static int amd_pmf_start_policy_engine(struct amd_pmf_dev *dev)
return 0;
}
+#ifdef CONFIG_AMD_PMF_DEBUG
+static ssize_t amd_pmf_get_pb_data(struct file *filp, const char __user *buf,
+ size_t length, loff_t *pos)
+{
+ struct amd_pmf_dev *dev = filp->private_data;
+ int ret;
+
+ /* Policy binary size cannot exceed POLICY_BUF_MAX_SZ */
+ if (length > POLICY_BUF_MAX_SZ || length == 0)
+ return -EINVAL;
+
+ dev->policy_sz = length;
+ if (copy_from_user(dev->policy_buf, buf, dev->policy_sz))
+ return -EFAULT;
+
+ ret = amd_pmf_start_policy_engine(dev);
+ if (ret)
+ return -EINVAL;
+
+ return length;
+}
+
+static const struct file_operations pb_fops = {
+ .write = amd_pmf_get_pb_data,
+ .open = simple_open,
+};
+
+static void amd_pmf_open_pb(struct amd_pmf_dev *dev, struct dentry *debugfs_root)
+{
+ dev->esbin = debugfs_create_dir("pb", debugfs_root);
+ debugfs_create_file("update_policy", 0644, dev->esbin, dev, &pb_fops);
+}
+
+static void amd_pmf_remove_pb(struct amd_pmf_dev *dev)
+{
+ debugfs_remove_recursive(dev->esbin);
+}
+#else
+static void amd_pmf_open_pb(struct amd_pmf_dev *dev, struct dentry *debugfs_root) {}
+static void amd_pmf_remove_pb(struct amd_pmf_dev *dev) {}
+#endif
+
static int amd_pmf_get_bios_buffer(struct amd_pmf_dev *dev)
{
dev->policy_buf = kzalloc(dev->policy_sz, GFP_KERNEL);
@@ -281,6 +329,9 @@ static int amd_pmf_get_bios_buffer(struct amd_pmf_dev *dev)
memcpy(dev->policy_buf, dev->policy_base, dev->policy_sz);
+ if (pb_side_load)
+ amd_pmf_open_pb(dev, dev->dbgfs_dir);
+
return amd_pmf_start_policy_engine(dev);
}
@@ -382,6 +433,9 @@ int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev)
{
+ if (pb_side_load)
+ amd_pmf_remove_pb(dev);
+
kfree(dev->prev_data);
kfree(dev->policy_buf);
cancel_delayed_work_sync(&dev->pb_work);
--
2.25.1
^ permalink raw reply related
* [PATCH v5 10/17] platform/x86/amd/pmf: Add facility to dump TA inputs
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
PMF driver sends constant inputs to TA which its gets via the other
subsystems in the kernel. To debug certain TA issues knowing what inputs
being sent to TA becomes critical. Add debug facility to the driver which
can isolate Smart PC and TA related issues.
Also, make source_as_str() as non-static function as this helper is
required outside of sps.c file.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/pmf.h | 3 +++
drivers/platform/x86/amd/pmf/spc.c | 37 +++++++++++++++++++++++++++
drivers/platform/x86/amd/pmf/tee-if.c | 1 +
3 files changed, 41 insertions(+)
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index 216a9f795436..593930519039 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -602,6 +602,7 @@ bool is_pprof_balanced(struct amd_pmf_dev *pmf);
int amd_pmf_power_slider_update_event(struct amd_pmf_dev *dev);
const char *amd_pmf_source_as_str(unsigned int state);
+const char *amd_pmf_source_as_str(unsigned int state);
int apmf_update_fan_idx(struct amd_pmf_dev *pdev, bool manual, u32 idx);
int amd_pmf_set_sps_power_limits(struct amd_pmf_dev *pmf);
@@ -632,4 +633,6 @@ int apmf_check_smart_pc(struct amd_pmf_dev *pmf_dev);
/* Smart PC - TA interfaces */
void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in);
+void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in);
+
#endif /* PMF_H */
diff --git a/drivers/platform/x86/amd/pmf/spc.c b/drivers/platform/x86/amd/pmf/spc.c
index bd5061fdfdbe..959146fd483f 100644
--- a/drivers/platform/x86/amd/pmf/spc.c
+++ b/drivers/platform/x86/amd/pmf/spc.c
@@ -14,6 +14,43 @@
#include <linux/units.h>
#include "pmf.h"
+#ifdef CONFIG_AMD_PMF_DEBUG
+static const char *ta_slider_as_str(unsigned int state)
+{
+ switch (state) {
+ case TA_BEST_PERFORMANCE:
+ return "PERFORMANCE";
+ case TA_BETTER_PERFORMANCE:
+ return "BALANCED";
+ case TA_BEST_BATTERY:
+ return "POWER_SAVER";
+ default:
+ return "Unknown TA Slider State";
+ }
+}
+
+void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
+{
+ dev_dbg(dev->dev, "==== TA inputs START ====\n");
+ dev_dbg(dev->dev, "Slider State: %s\n", ta_slider_as_str(in->ev_info.power_slider));
+ dev_dbg(dev->dev, "Power Source: %s\n", amd_pmf_source_as_str(in->ev_info.power_source));
+ dev_dbg(dev->dev, "Battery Percentage: %u\n", in->ev_info.bat_percentage);
+ dev_dbg(dev->dev, "Designed Battery Capacity: %u\n", in->ev_info.bat_design);
+ dev_dbg(dev->dev, "Fully Charged Capacity: %u\n", in->ev_info.full_charge_capacity);
+ dev_dbg(dev->dev, "Drain Rate: %d\n", in->ev_info.drain_rate);
+ dev_dbg(dev->dev, "Socket Power: %u\n", in->ev_info.socket_power);
+ dev_dbg(dev->dev, "Skin Temperature: %u\n", in->ev_info.skin_temperature);
+ dev_dbg(dev->dev, "Avg C0 Residency: %u\n", in->ev_info.avg_c0residency);
+ dev_dbg(dev->dev, "Max C0 Residency: %u\n", in->ev_info.max_c0residency);
+ dev_dbg(dev->dev, "GFX Busy: %u\n", in->ev_info.gfx_busy);
+ dev_dbg(dev->dev, "Connected Display Count: %u\n", in->ev_info.monitor_count);
+ dev_dbg(dev->dev, "LID State: %s\n", in->ev_info.lid_state ? "close" : "open");
+ dev_dbg(dev->dev, "==== TA inputs END ====\n");
+}
+#else
+void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in) {}
+#endif
+
static void amd_pmf_get_smu_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
{
u16 max, avg = 0;
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index 4c2475a28d55..5f10e5c6335e 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -182,6 +182,7 @@ static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
}
if (ta_sm->pmf_result == TA_PMF_TYPE_SUCCESS && out->actions_count) {
+ amd_pmf_dump_ta_inputs(dev, in);
dev_dbg(dev->dev, "action count:%u result:%x\n", out->actions_count,
ta_sm->pmf_result);
amd_pmf_apply_policies(dev, out);
--
2.25.1
^ permalink raw reply related
* [PATCH v5 09/17] platform/x86/amd/pmf: Make source_as_str() as non-static
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
Add amd_pmf prefix to source_as_str() function, so that the function name
does not look generic. As this is a helper function make it as non-static
so that it can be reused across multiple PMF features.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/pmf.h | 1 +
drivers/platform/x86/amd/pmf/sps.c | 5 +++--
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index fb9ce2593236..216a9f795436 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -600,6 +600,7 @@ int apmf_get_static_slider_granular(struct amd_pmf_dev *pdev,
struct apmf_static_slider_granular_output *output);
bool is_pprof_balanced(struct amd_pmf_dev *pmf);
int amd_pmf_power_slider_update_event(struct amd_pmf_dev *dev);
+const char *amd_pmf_source_as_str(unsigned int state);
int apmf_update_fan_idx(struct amd_pmf_dev *pdev, bool manual, u32 idx);
diff --git a/drivers/platform/x86/amd/pmf/sps.c b/drivers/platform/x86/amd/pmf/sps.c
index a70e67749be3..33e23e25c8b1 100644
--- a/drivers/platform/x86/amd/pmf/sps.c
+++ b/drivers/platform/x86/amd/pmf/sps.c
@@ -27,7 +27,7 @@ static const char *slider_as_str(unsigned int state)
}
}
-static const char *source_as_str(unsigned int state)
+const char *amd_pmf_source_as_str(unsigned int state)
{
switch (state) {
case POWER_SOURCE_AC:
@@ -47,7 +47,8 @@ static void amd_pmf_dump_sps_defaults(struct amd_pmf_static_slider_granular *dat
for (i = 0; i < POWER_SOURCE_MAX; i++) {
for (j = 0; j < POWER_MODE_MAX; j++) {
- pr_debug("--- Source:%s Mode:%s ---\n", source_as_str(i), slider_as_str(j));
+ pr_debug("--- Source:%s Mode:%s ---\n", amd_pmf_source_as_str(i),
+ slider_as_str(j));
pr_debug("SPL: %u mW\n", data->prop[i][j].spl);
pr_debug("SPPT: %u mW\n", data->prop[i][j].sppt);
pr_debug("SPPT_ApuOnly: %u mW\n", data->prop[i][j].sppt_apu_only);
--
2.25.1
^ permalink raw reply related
* [PATCH v5 08/17] platform/x86/amd/pmf: Add support to update system state
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
PMF driver based on the output actions from the TA can request to update
the system states like entering s0i3, lock screen etc. by generating
an uevent. Based on the udev rules set in the userspace the event id
matching the uevent shall get updated accordingly using the systemctl.
Sample udev rules under Documentation/admin-guide/pmf.rst.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
Documentation/admin-guide/index.rst | 1 +
Documentation/admin-guide/pmf.rst | 24 +++++++++++++++++++
drivers/platform/x86/amd/pmf/pmf.h | 9 +++++++
drivers/platform/x86/amd/pmf/tee-if.c | 34 +++++++++++++++++++++++++++
4 files changed, 68 insertions(+)
create mode 100644 Documentation/admin-guide/pmf.rst
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 43ea35613dfc..fb40a1f6f79e 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -119,6 +119,7 @@ configure specific aspects of kernel behavior to your liking.
parport
perf-security
pm/index
+ pmf
pnp
rapidio
ras
diff --git a/Documentation/admin-guide/pmf.rst b/Documentation/admin-guide/pmf.rst
new file mode 100644
index 000000000000..9ee729ffc19b
--- /dev/null
+++ b/Documentation/admin-guide/pmf.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Set udev rules for PMF Smart PC Builder
+---------------------------------------
+
+AMD PMF(Platform Management Framework) Smart PC Solution builder has to set the system states
+like S0i3, Screen lock, hibernate etc, based on the output actions provided by the PMF
+TA (Trusted Application).
+
+In order for this to work the PMF driver generates a uevent for userspace to react to. Below are
+sample udev rules that can facilitate this experience when a machine has PMF Smart PC solution builder
+enabled.
+
+Please add the following line(s) to
+``/etc/udev/rules.d/99-local.rules``::
+
+ DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="0", RUN+="/usr/bin/systemctl suspend"
+ DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="1", RUN+="/usr/bin/systemctl hibernate"
+ DRIVERS=="amd-pmf", ACTION=="change", ENV{EVENT_ID}=="2", RUN+="/bin/loginctl lock-sessions"
+
+EVENT_ID values:
+0= Put the system to S0i3/S2Idle
+1= Put the system to hibernate
+2= Lock the screen
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index 781989c7dddd..fb9ce2593236 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -73,6 +73,7 @@
#define PMF_POLICY_STT_MIN 6
#define PMF_POLICY_STT_SKINTEMP_APU 7
#define PMF_POLICY_STT_SKINTEMP_HS2 8
+#define PMF_POLICY_SYSTEM_STATE 9
#define PMF_POLICY_P3T 38
/* TA macros */
@@ -445,6 +446,13 @@ enum smart_pc_status {
};
/* Smart PC - TA internals */
+enum system_state {
+ SYSTEM_STATE_S0i3,
+ SYSTEM_STATE_S4,
+ SYSTEM_STATE_SCREEN_LOCK,
+ SYSTEM_STATE_MAX,
+};
+
enum ta_slider {
TA_BEST_BATTERY,
TA_BETTER_BATTERY,
@@ -476,6 +484,7 @@ enum ta_pmf_error_type {
};
struct pmf_action_table {
+ enum system_state system_state;
u32 spl; /* in mW */
u32 sppt; /* in mW */
u32 sppt_apuonly; /* in mW */
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index 9861c2702251..4c2475a28d55 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -24,6 +24,20 @@ MODULE_PARM_DESC(pb_actions_ms, "Policy binary actions sampling frequency (defau
static const uuid_t amd_pmf_ta_uuid = UUID_INIT(0x6fd93b77, 0x3fb8, 0x524d,
0xb1, 0x2d, 0xc5, 0x29, 0xb1, 0x3d, 0x85, 0x43);
+static const char *amd_pmf_uevent_as_str(unsigned int state)
+{
+ switch (state) {
+ case SYSTEM_STATE_S0i3:
+ return "S0i3";
+ case SYSTEM_STATE_S4:
+ return "S4";
+ case SYSTEM_STATE_SCREEN_LOCK:
+ return "SCREEN_LOCK";
+ default:
+ return "Unknown Smart PC event";
+ }
+}
+
static void amd_pmf_prepare_args(struct amd_pmf_dev *dev, int cmd,
struct tee_ioctl_invoke_arg *arg,
struct tee_param *param)
@@ -42,6 +56,20 @@ static void amd_pmf_prepare_args(struct amd_pmf_dev *dev, int cmd,
param[0].u.memref.shm_offs = 0;
}
+static int amd_pmf_update_uevents(struct amd_pmf_dev *dev, u16 event)
+{
+ char *envp[2] = {};
+
+ envp[0] = kasprintf(GFP_KERNEL, "EVENT_ID=%d", event);
+ if (!envp[0])
+ return -EINVAL;
+
+ kobject_uevent_env(&dev->dev->kobj, KOBJ_CHANGE, envp);
+
+ kfree(envp[0]);
+ return 0;
+}
+
static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_result *out)
{
u32 val;
@@ -113,6 +141,12 @@ static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_
dev->prev_data->p3t_limit = val;
}
break;
+
+ case PMF_POLICY_SYSTEM_STATE:
+ amd_pmf_update_uevents(dev, val);
+ dev_dbg(dev->dev, "update SYSTEM_STATE: %s\n",
+ amd_pmf_uevent_as_str(val));
+ break;
}
}
}
--
2.25.1
^ permalink raw reply related
* [PATCH v5 06/17] platform/x86/amd/pmf: Add support to get inputs from other subsystems
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
PMF driver sends changing inputs from each subystem to TA for evaluating
the conditions in the policy binary.
Add initial support of plumbing in the PMF driver for Smart PC to get
information from other subsystems in the kernel.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/Makefile | 2 +-
drivers/platform/x86/amd/pmf/pmf.h | 18 ++++
drivers/platform/x86/amd/pmf/spc.c | 120 ++++++++++++++++++++++++++
drivers/platform/x86/amd/pmf/tee-if.c | 3 +
4 files changed, 142 insertions(+), 1 deletion(-)
create mode 100644 drivers/platform/x86/amd/pmf/spc.c
diff --git a/drivers/platform/x86/amd/pmf/Makefile b/drivers/platform/x86/amd/pmf/Makefile
index d2746ee7369f..6b26e48ce8ad 100644
--- a/drivers/platform/x86/amd/pmf/Makefile
+++ b/drivers/platform/x86/amd/pmf/Makefile
@@ -7,4 +7,4 @@
obj-$(CONFIG_AMD_PMF) += amd-pmf.o
amd-pmf-objs := core.o acpi.o sps.o \
auto-mode.o cnqf.o \
- tee-if.o
+ tee-if.o spc.o
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index 092be501d4d3..a4a73b845c09 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -150,6 +150,21 @@ struct smu_pmf_metrics {
u16 infra_gfx_maxfreq; /* in MHz */
u16 skin_temp; /* in centi-Celsius */
u16 device_state;
+ u16 curtemp; /* in centi-Celsius */
+ u16 filter_alpha_value;
+ u16 avg_gfx_clkfrequency;
+ u16 avg_fclk_frequency;
+ u16 avg_gfx_activity;
+ u16 avg_socclk_frequency;
+ u16 avg_vclk_frequency;
+ u16 avg_vcn_activity;
+ u16 avg_dram_reads;
+ u16 avg_dram_writes;
+ u16 avg_socket_power;
+ u16 avg_core_power[2];
+ u16 avg_core_c0residency[16];
+ u16 spare1;
+ u32 metrics_counter;
} __packed;
enum amd_stt_skin_temp {
@@ -601,4 +616,7 @@ extern const struct attribute_group cnqf_feature_attribute_group;
int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev);
void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev);
int apmf_check_smart_pc(struct amd_pmf_dev *pmf_dev);
+
+/* Smart PC - TA interfaces */
+void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in);
#endif /* PMF_H */
diff --git a/drivers/platform/x86/amd/pmf/spc.c b/drivers/platform/x86/amd/pmf/spc.c
new file mode 100644
index 000000000000..bd5061fdfdbe
--- /dev/null
+++ b/drivers/platform/x86/amd/pmf/spc.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AMD Platform Management Framework Driver - Smart PC Capabilities
+ *
+ * Copyright (c) 2023, Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+ * Patil Rajesh Reddy <Patil.Reddy@amd.com>
+ */
+
+#include <acpi/button.h>
+#include <linux/power_supply.h>
+#include <linux/units.h>
+#include "pmf.h"
+
+static void amd_pmf_get_smu_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
+{
+ u16 max, avg = 0;
+ int i;
+
+ memset(dev->buf, 0, sizeof(dev->m_table));
+ amd_pmf_send_cmd(dev, SET_TRANSFER_TABLE, 0, 7, NULL);
+ memcpy(&dev->m_table, dev->buf, sizeof(dev->m_table));
+
+ in->ev_info.socket_power = dev->m_table.apu_power + dev->m_table.dgpu_power;
+ in->ev_info.skin_temperature = dev->m_table.skin_temp;
+
+ /* Get the avg and max C0 residency of all the cores */
+ max = dev->m_table.avg_core_c0residency[0];
+ for (i = 0; i < ARRAY_SIZE(dev->m_table.avg_core_c0residency); i++) {
+ avg += dev->m_table.avg_core_c0residency[i];
+ if (dev->m_table.avg_core_c0residency[i] > max)
+ max = dev->m_table.avg_core_c0residency[i];
+ }
+
+ avg = DIV_ROUND_CLOSEST(avg, ARRAY_SIZE(dev->m_table.avg_core_c0residency));
+ in->ev_info.avg_c0residency = avg;
+ in->ev_info.max_c0residency = max;
+ in->ev_info.gfx_busy = dev->m_table.avg_gfx_activity;
+}
+
+static const char * const pmf_battery_supply_name[] = {
+ "BATT",
+ "BAT0",
+};
+
+static int amd_pmf_get_battery_prop(enum power_supply_property prop)
+{
+ union power_supply_propval value;
+ struct power_supply *psy;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(pmf_battery_supply_name); i++) {
+ psy = power_supply_get_by_name(pmf_battery_supply_name[i]);
+ if (!psy)
+ continue;
+
+ ret = power_supply_get_property(psy, prop, &value);
+ if (ret) {
+ power_supply_put(psy);
+ return ret;
+ }
+ }
+
+ return value.intval;
+}
+
+static int amd_pmf_get_battery_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
+{
+ int val;
+
+ val = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_PRESENT);
+ if (val >= 0 && val != 1)
+ return -ENODEV;
+
+ in->ev_info.bat_percentage = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_CAPACITY);
+ /* all values in mWh metrics */
+ in->ev_info.bat_design = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN) /
+ MILLIWATT_PER_WATT;
+ in->ev_info.full_charge_capacity = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_ENERGY_FULL) /
+ MILLIWATT_PER_WATT;
+ in->ev_info.drain_rate = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_POWER_NOW) /
+ MILLIWATT_PER_WATT;
+
+ return 0;
+}
+
+static int amd_pmf_get_slider_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
+{
+ int val;
+
+ switch (dev->current_profile) {
+ case PLATFORM_PROFILE_PERFORMANCE:
+ val = TA_BEST_PERFORMANCE;
+ break;
+ case PLATFORM_PROFILE_BALANCED:
+ val = TA_BETTER_PERFORMANCE;
+ break;
+ case PLATFORM_PROFILE_LOW_POWER:
+ val = TA_BEST_BATTERY;
+ break;
+ default:
+ dev_err(dev->dev, "Unknown Platform Profile.\n");
+ return -EOPNOTSUPP;
+ }
+ in->ev_info.power_slider = val;
+
+ return 0;
+}
+
+void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
+{
+ /* TA side lid open is 1 and close is 0, hence the ! here */
+ in->ev_info.lid_state = !acpi_lid_open();
+ in->ev_info.power_source = amd_pmf_get_power_source();
+ amd_pmf_get_smu_info(dev, in);
+ amd_pmf_get_battery_info(dev, in);
+ amd_pmf_get_slider_info(dev, in);
+}
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index 468f3797a848..e3f17852d532 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -113,6 +113,7 @@ static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
{
struct ta_pmf_shared_memory *ta_sm = NULL;
struct ta_pmf_enact_result *out = NULL;
+ struct ta_pmf_enact_table *in = NULL;
struct tee_param param[MAX_TEE_PARAM];
struct tee_ioctl_invoke_arg arg;
int ret = 0;
@@ -123,11 +124,13 @@ static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
memset(dev->shbuf, 0, dev->policy_sz);
ta_sm = dev->shbuf;
out = &ta_sm->pmf_output.policy_apply_table;
+ in = &ta_sm->pmf_input.enact_table;
memset(ta_sm, 0, sizeof(*ta_sm));
ta_sm->command_id = TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES;
ta_sm->if_version = PMF_TA_IF_VERSION_MAJOR;
+ amd_pmf_populate_ta_inputs(dev, in);
amd_pmf_prepare_args(dev, TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES, &arg, param);
ret = tee_client_invoke_func(dev->tee_ctx, &arg, param);
--
2.25.1
^ permalink raw reply related
* [PATCH v5 07/17] platform/x86/amd/pmf: Add support update p3t limit
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
P3T (Peak Package Power Limit) is a metric within the SMU controller
that can influence the power limits. Add support from the driver
to update P3T limits accordingly.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/pmf.h | 3 +++
drivers/platform/x86/amd/pmf/tee-if.c | 8 ++++++++
2 files changed, 11 insertions(+)
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index a4a73b845c09..781989c7dddd 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -49,6 +49,7 @@
#define GET_STT_MIN_LIMIT 0x1F
#define GET_STT_LIMIT_APU 0x20
#define GET_STT_LIMIT_HS2 0x21
+#define SET_P3T 0x23 /* P3T: Peak Package Power Limit */
/* OS slider update notification */
#define DC_BEST_PERF 0
@@ -72,6 +73,7 @@
#define PMF_POLICY_STT_MIN 6
#define PMF_POLICY_STT_SKINTEMP_APU 7
#define PMF_POLICY_STT_SKINTEMP_HS2 8
+#define PMF_POLICY_P3T 38
/* TA macros */
#define PMF_TA_IF_VERSION_MAJOR 1
@@ -481,6 +483,7 @@ struct pmf_action_table {
u32 stt_minlimit; /* in mW */
u32 stt_skintemp_apu; /* in C */
u32 stt_skintemp_hs2; /* in C */
+ u32 p3t_limit; /* in mW */
};
/* Input conditions */
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index e3f17852d532..9861c2702251 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -105,6 +105,14 @@ static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_
dev->prev_data->stt_skintemp_hs2 = val;
}
break;
+
+ case PMF_POLICY_P3T:
+ if (dev->prev_data->p3t_limit != val) {
+ amd_pmf_send_cmd(dev, SET_P3T, false, val, NULL);
+ dev_dbg(dev->dev, "update P3T: %u\n", val);
+ dev->prev_data->p3t_limit = val;
+ }
+ break;
}
}
}
--
2.25.1
^ permalink raw reply related
* [PATCH v5 05/17] platform/x86/amd/pmf: change amd_pmf_init_features() call sequence
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
To sideload pmf policy binaries, the Smart PC Solution Builder provides a
debugfs file called "update_policy"; that gets created under a new debugfs
directory called "pb" and this new directory has to be associated with
existing parent directory for PMF driver called "amd_pmf".
In the current code structure, amd_pmf_dbgfs_register() is called after
amd_pmf_init_features(). This will not help when the Smart PC builder
feature has to be assoicated to the parent directory.
Hence change the order of amd_pmf_dbgfs_register() and call it before
amd_pmf_init_features() so that when the Smart PC init happens, it has the
parent debugfs directory to get itself hooked.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c
index c8f6ec4c2e2c..4b8156033fa6 100644
--- a/drivers/platform/x86/amd/pmf/core.c
+++ b/drivers/platform/x86/amd/pmf/core.c
@@ -442,9 +442,9 @@ static int amd_pmf_probe(struct platform_device *pdev)
apmf_acpi_init(dev);
platform_set_drvdata(pdev, dev);
+ amd_pmf_dbgfs_register(dev);
amd_pmf_init_features(dev);
apmf_install_handler(dev);
- amd_pmf_dbgfs_register(dev);
dev_info(dev->dev, "registered PMF device successfully\n");
--
2.25.1
^ permalink raw reply related
* [PATCH v5 04/17] platform/x86/amd/pmf: Add support for PMF Policy Binary
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
PMF Policy binary is a encrypted and signed binary that will be part
of the BIOS. PMF driver via the ACPI interface checks the existence
of Smart PC bit. If the advertised bit is found, PMF driver walks
the acpi namespace to find out the policy binary size and the address
which has to be passed to the TA during the TA init sequence.
The policy binary is comprised of inputs (or the events) and outputs
(or the actions). With the PMF ecosystem, OEMs generate the policy
binary (or could be multiple binaries) that contains a supported set
of inputs and outputs which could be specifically carved out for each
usage segment (or for each user also) that could influence the system
behavior either by enriching the user experience or/and boost/throttle
power limits.
Once the TA init command succeeds, the PMF driver sends the changing
events in the current environment to the TA for a constant sampling
frequency time (the event here could be a lid close or open) and
if the policy binary has corresponding action built within it, the
TA sends the action for it in the subsequent enact command.
If the inputs sent to the TA has no output defined in the policy
binary generated by OEMs, there will be no action to be performed
by the PMF driver.
Example policies:
1) if slider is performance ; set the SPL to 40W
Here PMF driver registers with the platform profile interface and
when the slider position is changed, PMF driver lets the TA know
about this. TA sends back an action to update the Sustained
Power Limit (SPL). PMF driver updates this limit via the PMFW mailbox.
2) if user_away ; then lock the system
Here PMF driver hooks to the AMD SFH driver to know the user presence
and send the inputs to TA and if the condition is met, the TA sends
the action of locking the system. PMF driver generates a uevent and
based on the udev rule in the userland the system gets locked with
systemctl.
The intent here is to provide the OEM's to make a policy to lock the
system when the user is away ; but the userland can make a choice to
ignore it.
and so on.
The OEMs will have an utility to create numerous such policies and
the policies shall be reviewed by AMD before signing and encrypting
them. Policies are shared between operating systems to have seemless user
experience.
Since all this action has to happen via the "amdtee" driver, currently
there is no caller for it in the kernel which can load the amdtee driver.
Without amdtee driver loading onto the system the "tee" calls shall fail
from the PMF driver. Hence an explicit MODULE_SOFTDEP has been added
to address this.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/Kconfig | 2 +-
drivers/platform/x86/amd/pmf/acpi.c | 37 +++++++
drivers/platform/x86/amd/pmf/core.c | 9 ++
drivers/platform/x86/amd/pmf/pmf.h | 141 ++++++++++++++++++++++++
drivers/platform/x86/amd/pmf/tee-if.c | 147 +++++++++++++++++++++++++-
5 files changed, 333 insertions(+), 3 deletions(-)
diff --git a/drivers/platform/x86/amd/pmf/Kconfig b/drivers/platform/x86/amd/pmf/Kconfig
index 32a029e8db80..f246252bddd8 100644
--- a/drivers/platform/x86/amd/pmf/Kconfig
+++ b/drivers/platform/x86/amd/pmf/Kconfig
@@ -9,7 +9,7 @@ config AMD_PMF
depends on POWER_SUPPLY
depends on AMD_NB
select ACPI_PLATFORM_PROFILE
- depends on TEE
+ depends on TEE && AMDTEE
help
This driver provides support for the AMD Platform Management Framework.
The goal is to enhance end user experience by making AMD PCs smarter,
diff --git a/drivers/platform/x86/amd/pmf/acpi.c b/drivers/platform/x86/amd/pmf/acpi.c
index 3fc5e4547d9f..4ec7957eb707 100644
--- a/drivers/platform/x86/amd/pmf/acpi.c
+++ b/drivers/platform/x86/amd/pmf/acpi.c
@@ -286,6 +286,43 @@ int apmf_install_handler(struct amd_pmf_dev *pmf_dev)
return 0;
}
+static acpi_status apmf_walk_resources(struct acpi_resource *res, void *data)
+{
+ struct amd_pmf_dev *dev = data;
+
+ switch (res->type) {
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ dev->policy_addr = res->data.address64.address.minimum;
+ dev->policy_sz = res->data.address64.address.address_length;
+ break;
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ dev->policy_addr = res->data.fixed_memory32.address;
+ dev->policy_sz = res->data.fixed_memory32.address_length;
+ break;
+ }
+
+ if (!dev->policy_addr || dev->policy_sz > POLICY_BUF_MAX_SZ || dev->policy_sz == 0) {
+ pr_err("Incorrect Policy params, possibly a SBIOS bug\n");
+ return AE_ERROR;
+ }
+
+ return AE_OK;
+}
+
+int apmf_check_smart_pc(struct amd_pmf_dev *pmf_dev)
+{
+ acpi_handle ahandle = ACPI_HANDLE(pmf_dev->dev);
+ acpi_status status;
+
+ status = acpi_walk_resources(ahandle, METHOD_NAME__CRS, apmf_walk_resources, pmf_dev);
+ if (ACPI_FAILURE(status)) {
+ dev_err(pmf_dev->dev, "acpi_walk_resources failed :%d\n", status);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
void apmf_acpi_deinit(struct amd_pmf_dev *pmf_dev)
{
acpi_handle ahandle = ACPI_HANDLE(pmf_dev->dev);
diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c
index f50b7ec9a625..c8f6ec4c2e2c 100644
--- a/drivers/platform/x86/amd/pmf/core.c
+++ b/drivers/platform/x86/amd/pmf/core.c
@@ -395,6 +395,14 @@ static int amd_pmf_probe(struct platform_device *pdev)
return -ENOMEM;
dev->dev = &pdev->dev;
+ err = apmf_check_smart_pc(dev);
+ if (err)
+ /*
+ * Lets not return from here if Smart PC bit is not advertised in
+ * the BIOS. This way, there will be some amount of power savings
+ * to the user with static slider (if enabled).
+ */
+ pr_err("PMF Smart PC not advertised in BIOS!:%d\n", err);
rdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
if (!rdev || !pci_match_id(pmf_pci_ids, rdev)) {
@@ -474,3 +482,4 @@ module_platform_driver(amd_pmf_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AMD Platform Management Framework Driver");
+MODULE_SOFTDEP("pre: amdtee");
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index 6a0e4c446dd3..092be501d4d3 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -14,6 +14,11 @@
#include <linux/acpi.h>
#include <linux/platform_profile.h>
+#define POLICY_BUF_MAX_SZ 0x4b000
+#define POLICY_SIGN_COOKIE 0x31535024
+#define POLICY_COOKIE_OFFSET 0x10
+#define POLICY_COOKIE_LEN 0x14
+
/* APMF Functions */
#define APMF_FUNC_VERIFY_INTERFACE 0
#define APMF_FUNC_GET_SYS_PARAMS 1
@@ -59,8 +64,21 @@
#define ARG_NONE 0
#define AVG_SAMPLE_SIZE 3
+/* Policy Actions */
+#define PMF_POLICY_SPL 2
+#define PMF_POLICY_SPPT 3
+#define PMF_POLICY_FPPT 4
+#define PMF_POLICY_SPPT_APU_ONLY 5
+#define PMF_POLICY_STT_MIN 6
+#define PMF_POLICY_STT_SKINTEMP_APU 7
+#define PMF_POLICY_STT_SKINTEMP_HS2 8
+
/* TA macros */
#define PMF_TA_IF_VERSION_MAJOR 1
+#define TA_PMF_ACTION_MAX 32
+#define TA_PMF_UNDO_MAX 8
+#define TA_OUTPUT_RESERVED_MEM 906
+#define MAX_OPERATION_PARAMS 4
/* AMD PMF BIOS interfaces */
struct apmf_verify_interface {
@@ -183,11 +201,16 @@ struct amd_pmf_dev {
bool cnqf_supported;
struct notifier_block pwr_src_notifier;
/* Smart PC solution builder */
+ unsigned char *policy_buf;
+ u32 policy_sz;
struct tee_context *tee_ctx;
struct tee_shm *fw_shm_pool;
u32 session_id;
void *shbuf;
struct delayed_work pb_work;
+ struct pmf_action_table *prev_data;
+ u64 policy_addr;
+ void *policy_base;
bool smart_pc_enabled;
};
@@ -399,17 +422,134 @@ struct apmf_dyn_slider_output {
struct apmf_cnqf_power_set ps[APMF_CNQF_MAX];
} __packed;
+enum smart_pc_status {
+ PMF_SMART_PC_ENABLED,
+ PMF_SMART_PC_DISABLED,
+};
+
+/* Smart PC - TA internals */
+enum ta_slider {
+ TA_BEST_BATTERY,
+ TA_BETTER_BATTERY,
+ TA_BETTER_PERFORMANCE,
+ TA_BEST_PERFORMANCE,
+ TA_MAX,
+};
+
/* Command ids for TA communication */
enum ta_pmf_command {
TA_PMF_COMMAND_POLICY_BUILDER_INITIALIZE,
TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES,
};
+enum ta_pmf_error_type {
+ TA_PMF_TYPE_SUCCESS,
+ TA_PMF_ERROR_TYPE_GENERIC,
+ TA_PMF_ERROR_TYPE_CRYPTO,
+ TA_PMF_ERROR_TYPE_CRYPTO_VALIDATE,
+ TA_PMF_ERROR_TYPE_CRYPTO_VERIFY_OEM,
+ TA_PMF_ERROR_TYPE_POLICY_BUILDER,
+ TA_PMF_ERROR_TYPE_PB_CONVERT,
+ TA_PMF_ERROR_TYPE_PB_SETUP,
+ TA_PMF_ERROR_TYPE_PB_ENACT,
+ TA_PMF_ERROR_TYPE_ASD_GET_DEVICE_INFO,
+ TA_PMF_ERROR_TYPE_ASD_GET_DEVICE_PCIE_INFO,
+ TA_PMF_ERROR_TYPE_SYS_DRV_FW_VALIDATION,
+ TA_PMF_ERROR_TYPE_MAX,
+};
+
+struct pmf_action_table {
+ u32 spl; /* in mW */
+ u32 sppt; /* in mW */
+ u32 sppt_apuonly; /* in mW */
+ u32 fppt; /* in mW */
+ u32 stt_minlimit; /* in mW */
+ u32 stt_skintemp_apu; /* in C */
+ u32 stt_skintemp_hs2; /* in C */
+};
+
+/* Input conditions */
+struct ta_pmf_condition_info {
+ u32 power_source;
+ u32 bat_percentage;
+ u32 power_slider;
+ u32 lid_state;
+ bool user_present;
+ u32 rsvd1[2];
+ u32 monitor_count;
+ u32 rsvd2[2];
+ u32 bat_design;
+ u32 full_charge_capacity;
+ int drain_rate;
+ bool user_engaged;
+ u32 device_state;
+ u32 socket_power;
+ u32 skin_temperature;
+ u32 rsvd3[5];
+ u32 ambient_light;
+ u32 length;
+ u32 avg_c0residency;
+ u32 max_c0residency;
+ u32 s0i3_entry;
+ u32 gfx_busy;
+ u32 rsvd4[7];
+ bool camera_state;
+ u32 workload_type;
+ u32 display_type;
+ u32 display_state;
+ u32 rsvd5[150];
+};
+
+struct ta_pmf_load_policy_table {
+ u32 table_size;
+ u8 table[POLICY_BUF_MAX_SZ];
+};
+
+/* TA initialization params */
+struct ta_pmf_init_table {
+ u32 frequency; /* SMU sampling frequency */
+ bool validate;
+ bool sku_check;
+ bool metadata_macrocheck;
+ struct ta_pmf_load_policy_table policies_table;
+};
+
+/* Everything the TA needs to Enact Policies */
+struct ta_pmf_enact_table {
+ struct ta_pmf_condition_info ev_info;
+ u32 name;
+};
+
+struct ta_pmf_action {
+ u32 action_index;
+ u32 value;
+};
+
+/* Output actions from TA */
+struct ta_pmf_enact_result {
+ u32 actions_count;
+ struct ta_pmf_action actions_list[TA_PMF_ACTION_MAX];
+ u32 undo_count;
+ struct ta_pmf_action undo_list[TA_PMF_UNDO_MAX];
+};
+
+union ta_pmf_input {
+ struct ta_pmf_enact_table enact_table;
+ struct ta_pmf_init_table init_table;
+};
+
+union ta_pmf_output {
+ struct ta_pmf_enact_result policy_apply_table;
+ u32 rsvd[TA_OUTPUT_RESERVED_MEM];
+};
+
struct ta_pmf_shared_memory {
int command_id;
int resp_id;
u32 pmf_result;
u32 if_version;
+ union ta_pmf_output pmf_output;
+ union ta_pmf_input pmf_input;
};
/* Core Layer */
@@ -460,4 +600,5 @@ extern const struct attribute_group cnqf_feature_attribute_group;
/* Smart PC builder Layer */
int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev);
void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev);
+int apmf_check_smart_pc(struct amd_pmf_dev *pmf_dev);
#endif /* PMF_H */
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index 4036f435f1e2..468f3797a848 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -42,9 +42,77 @@ static void amd_pmf_prepare_args(struct amd_pmf_dev *dev, int cmd,
param[0].u.memref.shm_offs = 0;
}
+static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_result *out)
+{
+ u32 val;
+ int idx;
+
+ for (idx = 0; idx < out->actions_count; idx++) {
+ val = out->actions_list[idx].value;
+ switch (out->actions_list[idx].action_index) {
+ case PMF_POLICY_SPL:
+ if (dev->prev_data->spl != val) {
+ amd_pmf_send_cmd(dev, SET_SPL, false, val, NULL);
+ dev_dbg(dev->dev, "update SPL: %u\n", val);
+ dev->prev_data->spl = val;
+ }
+ break;
+
+ case PMF_POLICY_SPPT:
+ if (dev->prev_data->sppt != val) {
+ amd_pmf_send_cmd(dev, SET_SPPT, false, val, NULL);
+ dev_dbg(dev->dev, "update SPPT: %u\n", val);
+ dev->prev_data->sppt = val;
+ }
+ break;
+
+ case PMF_POLICY_FPPT:
+ if (dev->prev_data->fppt != val) {
+ amd_pmf_send_cmd(dev, SET_FPPT, false, val, NULL);
+ dev_dbg(dev->dev, "update FPPT: %u\n", val);
+ dev->prev_data->fppt = val;
+ }
+ break;
+
+ case PMF_POLICY_SPPT_APU_ONLY:
+ if (dev->prev_data->sppt_apuonly != val) {
+ amd_pmf_send_cmd(dev, SET_SPPT_APU_ONLY, false, val, NULL);
+ dev_dbg(dev->dev, "update SPPT_APU_ONLY: %u\n", val);
+ dev->prev_data->sppt_apuonly = val;
+ }
+ break;
+
+ case PMF_POLICY_STT_MIN:
+ if (dev->prev_data->stt_minlimit != val) {
+ amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false, val, NULL);
+ dev_dbg(dev->dev, "update STT_MIN: %u\n", val);
+ dev->prev_data->stt_minlimit = val;
+ }
+ break;
+
+ case PMF_POLICY_STT_SKINTEMP_APU:
+ if (dev->prev_data->stt_skintemp_apu != val) {
+ amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, val, NULL);
+ dev_dbg(dev->dev, "update STT_SKINTEMP_APU: %u\n", val);
+ dev->prev_data->stt_skintemp_apu = val;
+ }
+ break;
+
+ case PMF_POLICY_STT_SKINTEMP_HS2:
+ if (dev->prev_data->stt_skintemp_hs2 != val) {
+ amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, val, NULL);
+ dev_dbg(dev->dev, "update STT_SKINTEMP_HS2: %u\n", val);
+ dev->prev_data->stt_skintemp_hs2 = val;
+ }
+ break;
+ }
+ }
+}
+
static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
{
struct ta_pmf_shared_memory *ta_sm = NULL;
+ struct ta_pmf_enact_result *out = NULL;
struct tee_param param[MAX_TEE_PARAM];
struct tee_ioctl_invoke_arg arg;
int ret = 0;
@@ -52,7 +120,10 @@ static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
if (!dev->tee_ctx)
return -ENODEV;
+ memset(dev->shbuf, 0, dev->policy_sz);
ta_sm = dev->shbuf;
+ out = &ta_sm->pmf_output.policy_apply_table;
+
memset(ta_sm, 0, sizeof(*ta_sm));
ta_sm->command_id = TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES;
ta_sm->if_version = PMF_TA_IF_VERSION_MAJOR;
@@ -65,6 +136,12 @@ static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
return ret;
}
+ if (ta_sm->pmf_result == TA_PMF_TYPE_SUCCESS && out->actions_count) {
+ dev_dbg(dev->dev, "action count:%u result:%x\n", out->actions_count,
+ ta_sm->pmf_result);
+ amd_pmf_apply_policies(dev, out);
+ }
+
return 0;
}
@@ -72,6 +149,7 @@ static int amd_pmf_invoke_cmd_init(struct amd_pmf_dev *dev)
{
struct ta_pmf_shared_memory *ta_sm = NULL;
struct tee_param param[MAX_TEE_PARAM];
+ struct ta_pmf_init_table *in = NULL;
struct tee_ioctl_invoke_arg arg;
int ret = 0;
@@ -80,10 +158,21 @@ static int amd_pmf_invoke_cmd_init(struct amd_pmf_dev *dev)
return -ENODEV;
}
+ dev_dbg(dev->dev, "Policy Binary size: %u bytes\n", dev->policy_sz);
+ memset(dev->shbuf, 0, dev->policy_sz);
ta_sm = dev->shbuf;
+ in = &ta_sm->pmf_input.init_table;
+
ta_sm->command_id = TA_PMF_COMMAND_POLICY_BUILDER_INITIALIZE;
ta_sm->if_version = PMF_TA_IF_VERSION_MAJOR;
+ in->metadata_macrocheck = false;
+ in->sku_check = false;
+ in->validate = true;
+ in->frequency = pb_actions_ms;
+ in->policies_table.table_size = dev->policy_sz;
+
+ memcpy(in->policies_table.table, dev->policy_buf, dev->policy_sz);
amd_pmf_prepare_args(dev, TA_PMF_COMMAND_POLICY_BUILDER_INITIALIZE, &arg, param);
ret = tee_client_invoke_func(dev->tee_ctx, &arg, param);
@@ -103,6 +192,52 @@ static void amd_pmf_invoke_cmd(struct work_struct *work)
schedule_delayed_work(&dev->pb_work, msecs_to_jiffies(pb_actions_ms));
}
+static int amd_pmf_start_policy_engine(struct amd_pmf_dev *dev)
+{
+ u32 cookie, length;
+ int res;
+
+ cookie = readl(dev->policy_buf + POLICY_COOKIE_OFFSET);
+ length = readl(dev->policy_buf + POLICY_COOKIE_LEN);
+
+ if (cookie != POLICY_SIGN_COOKIE || !length)
+ return -EINVAL;
+
+ /* Update the actual length */
+ dev->policy_sz = length + 512;
+ res = amd_pmf_invoke_cmd_init(dev);
+ if (res == TA_PMF_TYPE_SUCCESS) {
+ /* Now its safe to announce that smart pc is enabled */
+ dev->smart_pc_enabled = PMF_SMART_PC_ENABLED;
+ /*
+ * Start collecting the data from TA FW after a small delay
+ * or else, we might end up getting stale values.
+ */
+ schedule_delayed_work(&dev->pb_work, msecs_to_jiffies(pb_actions_ms * 3));
+ } else {
+ dev_err(dev->dev, "ta invoke cmd init failed err: %x\n", res);
+ dev->smart_pc_enabled = PMF_SMART_PC_DISABLED;
+ return res;
+ }
+
+ return 0;
+}
+
+static int amd_pmf_get_bios_buffer(struct amd_pmf_dev *dev)
+{
+ dev->policy_buf = kzalloc(dev->policy_sz, GFP_KERNEL);
+ if (!dev->policy_buf)
+ return -ENOMEM;
+
+ dev->policy_base = devm_ioremap(dev->dev, dev->policy_addr, dev->policy_sz);
+ if (!dev->policy_base)
+ return -ENOMEM;
+
+ memcpy(dev->policy_buf, dev->policy_base, dev->policy_sz);
+
+ return amd_pmf_start_policy_engine(dev);
+}
+
static int amd_pmf_amdtee_ta_match(struct tee_ioctl_version_data *ver, const void *data)
{
return ver->impl_id == TEE_IMPL_ID_AMDTEE;
@@ -146,7 +281,7 @@ static int amd_pmf_tee_init(struct amd_pmf_dev *dev)
goto out_ctx;
}
- size = sizeof(struct ta_pmf_shared_memory);
+ size = sizeof(struct ta_pmf_shared_memory) + dev->policy_sz;
dev->fw_shm_pool = tee_shm_alloc_kernel_buf(dev->tee_ctx, size);
if (IS_ERR(dev->fw_shm_pool)) {
dev_err(dev->dev, "Failed to alloc TEE shared memory\n");
@@ -190,11 +325,19 @@ int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
return ret;
INIT_DELAYED_WORK(&dev->pb_work, amd_pmf_invoke_cmd);
- return 0;
+ amd_pmf_set_dram_addr(dev);
+ amd_pmf_get_bios_buffer(dev);
+ dev->prev_data = kzalloc(sizeof(*dev->prev_data), GFP_KERNEL);
+ if (!dev->prev_data)
+ return -ENOMEM;
+
+ return dev->smart_pc_enabled;
}
void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev)
{
+ kfree(dev->prev_data);
+ kfree(dev->policy_buf);
cancel_delayed_work_sync(&dev->pb_work);
amd_pmf_tee_deinit(dev);
}
--
2.25.1
^ permalink raw reply related
* [PATCH v5 03/17] platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr()
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
In the current code, the metrics table information was required only
for auto-mode or CnQF at a given time. Hence keeping the return type
of amd_pmf_set_dram_addr() as static made sense.
But with the addition of Smart PC builder feature, the metrics table
information has to be shared by the Smart PC also and this feature
resides outside of core.c.
To make amd_pmf_set_dram_addr() visible outside of core.c make it
as a non-static function and move the allocation of memory for
metrics table from amd_pmf_init_metrics_table() to amd_pmf_set_dram_addr()
as amd_pmf_set_dram_addr() is the common function to set the DRAM
address.
Add a suspend handler that can free up the allocated memory for getting
the metrics table information.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/core.c | 42 ++++++++++++++++++++++-------
drivers/platform/x86/amd/pmf/pmf.h | 1 +
2 files changed, 34 insertions(+), 9 deletions(-)
diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c
index ec92d1cc0dac..f50b7ec9a625 100644
--- a/drivers/platform/x86/amd/pmf/core.c
+++ b/drivers/platform/x86/amd/pmf/core.c
@@ -251,29 +251,35 @@ static const struct pci_device_id pmf_pci_ids[] = {
{ }
};
-static void amd_pmf_set_dram_addr(struct amd_pmf_dev *dev)
+int amd_pmf_set_dram_addr(struct amd_pmf_dev *dev)
{
u64 phys_addr;
u32 hi, low;
+ /* Get Metrics Table Address */
+ dev->buf = kzalloc(sizeof(dev->m_table), GFP_KERNEL);
+ if (!dev->buf)
+ return -ENOMEM;
+
phys_addr = virt_to_phys(dev->buf);
hi = phys_addr >> 32;
low = phys_addr & GENMASK(31, 0);
amd_pmf_send_cmd(dev, SET_DRAM_ADDR_HIGH, 0, hi, NULL);
amd_pmf_send_cmd(dev, SET_DRAM_ADDR_LOW, 0, low, NULL);
+
+ return 0;
}
int amd_pmf_init_metrics_table(struct amd_pmf_dev *dev)
{
- /* Get Metrics Table Address */
- dev->buf = kzalloc(sizeof(dev->m_table), GFP_KERNEL);
- if (!dev->buf)
- return -ENOMEM;
+ int ret;
INIT_DELAYED_WORK(&dev->work_buffer, amd_pmf_get_metrics);
- amd_pmf_set_dram_addr(dev);
+ ret = amd_pmf_set_dram_addr(dev);
+ if (ret)
+ return ret;
/*
* Start collecting the metrics data after a small delay
@@ -284,17 +290,35 @@ int amd_pmf_init_metrics_table(struct amd_pmf_dev *dev)
return 0;
}
+static int amd_pmf_suspend_handler(struct device *dev)
+{
+ struct amd_pmf_dev *pdev = dev_get_drvdata(dev);
+
+ /*
+ * Free the buffer allocated for storing the metrics table
+ * information, as will have to allocate it freshly after
+ * resume.
+ */
+ kfree(pdev->buf);
+
+ return 0;
+}
+
static int amd_pmf_resume_handler(struct device *dev)
{
struct amd_pmf_dev *pdev = dev_get_drvdata(dev);
+ int ret;
- if (pdev->buf)
- amd_pmf_set_dram_addr(pdev);
+ if (pdev->buf) {
+ ret = amd_pmf_set_dram_addr(pdev);
+ if (ret)
+ return ret;
+ }
return 0;
}
-static DEFINE_SIMPLE_DEV_PM_OPS(amd_pmf_pm, NULL, amd_pmf_resume_handler);
+static DEFINE_SIMPLE_DEV_PM_OPS(amd_pmf_pm, amd_pmf_suspend_handler, amd_pmf_resume_handler);
static void amd_pmf_init_features(struct amd_pmf_dev *dev)
{
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index a24e34e42032..6a0e4c446dd3 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -421,6 +421,7 @@ int amd_pmf_init_metrics_table(struct amd_pmf_dev *dev);
int amd_pmf_get_power_source(void);
int apmf_install_handler(struct amd_pmf_dev *pmf_dev);
int apmf_os_power_slider_update(struct amd_pmf_dev *dev, u8 flag);
+int amd_pmf_set_dram_addr(struct amd_pmf_dev *dev);
/* SPS Layer */
int amd_pmf_get_pprof_modes(struct amd_pmf_dev *pmf);
--
2.25.1
^ permalink raw reply related
* [PATCH v5 01/17] platform/x86/amd/pmf: Add PMF TEE interface
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
AMD PMF driver loads the PMF TA (Trusted Application) into the AMD
ASP's (AMD Security Processor) TEE (Trusted Execution Environment).
PMF Trusted Application is a secured firmware placed under
/lib/firmware/amdtee gets loaded only when the TEE environment is
initialized. Add the initial code path to build these pipes.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/Kconfig | 1 +
drivers/platform/x86/amd/pmf/Makefile | 3 +-
drivers/platform/x86/amd/pmf/core.c | 10 ++-
drivers/platform/x86/amd/pmf/pmf.h | 16 ++++
drivers/platform/x86/amd/pmf/tee-if.c | 105 ++++++++++++++++++++++++++
5 files changed, 130 insertions(+), 5 deletions(-)
create mode 100644 drivers/platform/x86/amd/pmf/tee-if.c
diff --git a/drivers/platform/x86/amd/pmf/Kconfig b/drivers/platform/x86/amd/pmf/Kconfig
index 3064bc8ea167..32a029e8db80 100644
--- a/drivers/platform/x86/amd/pmf/Kconfig
+++ b/drivers/platform/x86/amd/pmf/Kconfig
@@ -9,6 +9,7 @@ config AMD_PMF
depends on POWER_SUPPLY
depends on AMD_NB
select ACPI_PLATFORM_PROFILE
+ depends on TEE
help
This driver provides support for the AMD Platform Management Framework.
The goal is to enhance end user experience by making AMD PCs smarter,
diff --git a/drivers/platform/x86/amd/pmf/Makefile b/drivers/platform/x86/amd/pmf/Makefile
index fdededf54392..d2746ee7369f 100644
--- a/drivers/platform/x86/amd/pmf/Makefile
+++ b/drivers/platform/x86/amd/pmf/Makefile
@@ -6,4 +6,5 @@
obj-$(CONFIG_AMD_PMF) += amd-pmf.o
amd-pmf-objs := core.o acpi.o sps.o \
- auto-mode.o cnqf.o
+ auto-mode.o cnqf.o \
+ tee-if.o
diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c
index 78ed3ee22555..ec92d1cc0dac 100644
--- a/drivers/platform/x86/amd/pmf/core.c
+++ b/drivers/platform/x86/amd/pmf/core.c
@@ -309,13 +309,13 @@ static void amd_pmf_init_features(struct amd_pmf_dev *dev)
dev_dbg(dev->dev, "SPS enabled and Platform Profiles registered\n");
}
- /* Enable Auto Mode */
- if (is_apmf_func_supported(dev, APMF_FUNC_AUTO_MODE)) {
+ if (!amd_pmf_init_smart_pc(dev)) {
+ dev_dbg(dev->dev, "Smart PC Solution Enabled\n");
+ } else if (is_apmf_func_supported(dev, APMF_FUNC_AUTO_MODE)) {
amd_pmf_init_auto_mode(dev);
dev_dbg(dev->dev, "Auto Mode Init done\n");
} else if (is_apmf_func_supported(dev, APMF_FUNC_DYN_SLIDER_AC) ||
is_apmf_func_supported(dev, APMF_FUNC_DYN_SLIDER_DC)) {
- /* Enable Cool n Quiet Framework (CnQF) */
ret = amd_pmf_init_cnqf(dev);
if (ret)
dev_warn(dev->dev, "CnQF Init failed\n");
@@ -330,7 +330,9 @@ static void amd_pmf_deinit_features(struct amd_pmf_dev *dev)
amd_pmf_deinit_sps(dev);
}
- if (is_apmf_func_supported(dev, APMF_FUNC_AUTO_MODE)) {
+ if (!dev->smart_pc_enabled) {
+ amd_pmf_deinit_smart_pc(dev);
+ } else if (is_apmf_func_supported(dev, APMF_FUNC_AUTO_MODE)) {
amd_pmf_deinit_auto_mode(dev);
} else if (is_apmf_func_supported(dev, APMF_FUNC_DYN_SLIDER_AC) ||
is_apmf_func_supported(dev, APMF_FUNC_DYN_SLIDER_DC)) {
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index deba88e6e4c8..bd40458937ba 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -179,6 +179,12 @@ struct amd_pmf_dev {
bool cnqf_enabled;
bool cnqf_supported;
struct notifier_block pwr_src_notifier;
+ /* Smart PC solution builder */
+ struct tee_context *tee_ctx;
+ struct tee_shm *fw_shm_pool;
+ u32 session_id;
+ void *shbuf;
+ bool smart_pc_enabled;
};
struct apmf_sps_prop_granular {
@@ -389,6 +395,13 @@ struct apmf_dyn_slider_output {
struct apmf_cnqf_power_set ps[APMF_CNQF_MAX];
} __packed;
+struct ta_pmf_shared_memory {
+ int command_id;
+ int resp_id;
+ u32 pmf_result;
+ u32 if_version;
+};
+
/* Core Layer */
int apmf_acpi_init(struct amd_pmf_dev *pmf_dev);
void apmf_acpi_deinit(struct amd_pmf_dev *pmf_dev);
@@ -433,4 +446,7 @@ void amd_pmf_deinit_cnqf(struct amd_pmf_dev *dev);
int amd_pmf_trans_cnqf(struct amd_pmf_dev *dev, int socket_power, ktime_t time_lapsed_ms);
extern const struct attribute_group cnqf_feature_attribute_group;
+/* Smart PC builder Layer */
+int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev);
+void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev);
#endif /* PMF_H */
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
new file mode 100644
index 000000000000..6ec8c3726624
--- /dev/null
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AMD Platform Management Framework Driver - TEE Interface
+ *
+ * Copyright (c) 2023, Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+ */
+
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+#include "pmf.h"
+
+#define MAX_TEE_PARAM 4
+static const uuid_t amd_pmf_ta_uuid = UUID_INIT(0x6fd93b77, 0x3fb8, 0x524d,
+ 0xb1, 0x2d, 0xc5, 0x29, 0xb1, 0x3d, 0x85, 0x43);
+
+static int amd_pmf_amdtee_ta_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+ return ver->impl_id == TEE_IMPL_ID_AMDTEE;
+}
+
+static int amd_pmf_ta_open_session(struct tee_context *ctx, u32 *id)
+{
+ struct tee_ioctl_open_session_arg sess_arg = {};
+ int rc;
+
+ export_uuid(sess_arg.uuid, &amd_pmf_ta_uuid);
+ sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
+ sess_arg.num_params = 0;
+
+ rc = tee_client_open_session(ctx, &sess_arg, NULL);
+ if (rc < 0 || sess_arg.ret != 0) {
+ pr_err("Failed to open TEE session err:%#x, rc:%d\n", sess_arg.ret, rc);
+ return rc;
+ }
+
+ *id = sess_arg.session;
+
+ return rc;
+}
+
+static int amd_pmf_tee_init(struct amd_pmf_dev *dev)
+{
+ u32 size;
+ int ret;
+
+ dev->tee_ctx = tee_client_open_context(NULL, amd_pmf_amdtee_ta_match, NULL, NULL);
+ if (IS_ERR(dev->tee_ctx)) {
+ dev_err(dev->dev, "Failed to open TEE context\n");
+ return PTR_ERR(dev->tee_ctx);
+ }
+
+ ret = amd_pmf_ta_open_session(dev->tee_ctx, &dev->session_id);
+ if (ret) {
+ dev_err(dev->dev, "Failed to open TA session (%d)\n", ret);
+ ret = -EINVAL;
+ goto out_ctx;
+ }
+
+ size = sizeof(struct ta_pmf_shared_memory);
+ dev->fw_shm_pool = tee_shm_alloc_kernel_buf(dev->tee_ctx, size);
+ if (IS_ERR(dev->fw_shm_pool)) {
+ dev_err(dev->dev, "Failed to alloc TEE shared memory\n");
+ ret = PTR_ERR(dev->fw_shm_pool);
+ goto out_sess;
+ }
+
+ dev->shbuf = tee_shm_get_va(dev->fw_shm_pool, 0);
+ if (IS_ERR(dev->shbuf)) {
+ dev_err(dev->dev, "Failed to get TEE virtual address\n");
+ ret = PTR_ERR(dev->shbuf);
+ goto out_shm;
+ }
+ dev_dbg(dev->dev, "TEE init done\n");
+
+ return 0;
+
+out_shm:
+ tee_shm_free(dev->fw_shm_pool);
+out_sess:
+ tee_client_close_session(dev->tee_ctx, dev->session_id);
+out_ctx:
+ tee_client_close_context(dev->tee_ctx);
+
+ return ret;
+}
+
+static void amd_pmf_tee_deinit(struct amd_pmf_dev *dev)
+{
+ tee_shm_free(dev->fw_shm_pool);
+ tee_client_close_session(dev->tee_ctx, dev->session_id);
+ tee_client_close_context(dev->tee_ctx);
+}
+
+int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
+{
+ return amd_pmf_tee_init(dev);
+}
+
+void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev)
+{
+ amd_pmf_tee_deinit(dev);
+}
--
2.25.1
^ permalink raw reply related
* [PATCH v5 02/17] platform/x86/amd/pmf: Add support for PMF-TA interaction
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
In-Reply-To: <20231117080747.3643990-1-Shyam-sundar.S-k@amd.com>
PMF TA (Trusted Application) loads via the TEE environment into the
AMD ASP.
PMF-TA supports two commands:
1) Init: Initialize the TA with the PMF Smart PC policy binary and
start the policy engine. A policy is a combination of inputs and
outputs, where;
- the inputs are the changing dynamics of the system like the user
behaviour, system heuristics etc.
- the outputs, which are the actions to be set on the system which
lead to better power management and enhanced user experience.
PMF driver acts as a central manager in this case to supply the
inputs required to the TA (either by getting the information from
the other kernel subsystems or from userland)
2) Enact: Enact the output actions from the TA. The action could be
applying a new thermal limit to boost/throttle the power limits or
change system behavior.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
drivers/platform/x86/amd/pmf/pmf.h | 10 +++
drivers/platform/x86/amd/pmf/tee-if.c | 97 ++++++++++++++++++++++++++-
2 files changed, 106 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
index bd40458937ba..a24e34e42032 100644
--- a/drivers/platform/x86/amd/pmf/pmf.h
+++ b/drivers/platform/x86/amd/pmf/pmf.h
@@ -59,6 +59,9 @@
#define ARG_NONE 0
#define AVG_SAMPLE_SIZE 3
+/* TA macros */
+#define PMF_TA_IF_VERSION_MAJOR 1
+
/* AMD PMF BIOS interfaces */
struct apmf_verify_interface {
u16 size;
@@ -184,6 +187,7 @@ struct amd_pmf_dev {
struct tee_shm *fw_shm_pool;
u32 session_id;
void *shbuf;
+ struct delayed_work pb_work;
bool smart_pc_enabled;
};
@@ -395,6 +399,12 @@ struct apmf_dyn_slider_output {
struct apmf_cnqf_power_set ps[APMF_CNQF_MAX];
} __packed;
+/* Command ids for TA communication */
+enum ta_pmf_command {
+ TA_PMF_COMMAND_POLICY_BUILDER_INITIALIZE,
+ TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES,
+};
+
struct ta_pmf_shared_memory {
int command_id;
int resp_id;
diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
index 6ec8c3726624..4036f435f1e2 100644
--- a/drivers/platform/x86/amd/pmf/tee-if.c
+++ b/drivers/platform/x86/amd/pmf/tee-if.c
@@ -13,9 +13,96 @@
#include "pmf.h"
#define MAX_TEE_PARAM 4
+
+/* Policy binary actions sampling frequency (in ms) */
+static int pb_actions_ms = MSEC_PER_SEC;
+#ifdef CONFIG_AMD_PMF_DEBUG
+module_param(pb_actions_ms, int, 0644);
+MODULE_PARM_DESC(pb_actions_ms, "Policy binary actions sampling frequency (default = 1000ms)");
+#endif
+
static const uuid_t amd_pmf_ta_uuid = UUID_INIT(0x6fd93b77, 0x3fb8, 0x524d,
0xb1, 0x2d, 0xc5, 0x29, 0xb1, 0x3d, 0x85, 0x43);
+static void amd_pmf_prepare_args(struct amd_pmf_dev *dev, int cmd,
+ struct tee_ioctl_invoke_arg *arg,
+ struct tee_param *param)
+{
+ memset(arg, 0, sizeof(*arg));
+ memset(param, 0, MAX_TEE_PARAM * sizeof(*param));
+
+ arg->func = cmd;
+ arg->session = dev->session_id;
+ arg->num_params = MAX_TEE_PARAM;
+
+ /* Fill invoke cmd params */
+ param[0].u.memref.size = sizeof(struct ta_pmf_shared_memory);
+ param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+ param[0].u.memref.shm = dev->fw_shm_pool;
+ param[0].u.memref.shm_offs = 0;
+}
+
+static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
+{
+ struct ta_pmf_shared_memory *ta_sm = NULL;
+ struct tee_param param[MAX_TEE_PARAM];
+ struct tee_ioctl_invoke_arg arg;
+ int ret = 0;
+
+ if (!dev->tee_ctx)
+ return -ENODEV;
+
+ ta_sm = dev->shbuf;
+ memset(ta_sm, 0, sizeof(*ta_sm));
+ ta_sm->command_id = TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES;
+ ta_sm->if_version = PMF_TA_IF_VERSION_MAJOR;
+
+ amd_pmf_prepare_args(dev, TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES, &arg, param);
+
+ ret = tee_client_invoke_func(dev->tee_ctx, &arg, param);
+ if (ret < 0 || arg.ret != 0) {
+ dev_err(dev->dev, "TEE enact cmd failed. err: %x, ret:%d\n", arg.ret, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int amd_pmf_invoke_cmd_init(struct amd_pmf_dev *dev)
+{
+ struct ta_pmf_shared_memory *ta_sm = NULL;
+ struct tee_param param[MAX_TEE_PARAM];
+ struct tee_ioctl_invoke_arg arg;
+ int ret = 0;
+
+ if (!dev->tee_ctx) {
+ dev_err(dev->dev, "Failed to get TEE context\n");
+ return -ENODEV;
+ }
+
+ ta_sm = dev->shbuf;
+ ta_sm->command_id = TA_PMF_COMMAND_POLICY_BUILDER_INITIALIZE;
+ ta_sm->if_version = PMF_TA_IF_VERSION_MAJOR;
+
+ amd_pmf_prepare_args(dev, TA_PMF_COMMAND_POLICY_BUILDER_INITIALIZE, &arg, param);
+
+ ret = tee_client_invoke_func(dev->tee_ctx, &arg, param);
+ if (ret < 0 || arg.ret != 0) {
+ dev_err(dev->dev, "Failed to invoke TEE init cmd. err: %x, ret:%d\n", arg.ret, ret);
+ return ret;
+ }
+
+ return ta_sm->pmf_result;
+}
+
+static void amd_pmf_invoke_cmd(struct work_struct *work)
+{
+ struct amd_pmf_dev *dev = container_of(work, struct amd_pmf_dev, pb_work.work);
+
+ amd_pmf_invoke_cmd_enact(dev);
+ schedule_delayed_work(&dev->pb_work, msecs_to_jiffies(pb_actions_ms));
+}
+
static int amd_pmf_amdtee_ta_match(struct tee_ioctl_version_data *ver, const void *data)
{
return ver->impl_id == TEE_IMPL_ID_AMDTEE;
@@ -96,10 +183,18 @@ static void amd_pmf_tee_deinit(struct amd_pmf_dev *dev)
int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
{
- return amd_pmf_tee_init(dev);
+ int ret;
+
+ ret = amd_pmf_tee_init(dev);
+ if (ret)
+ return ret;
+
+ INIT_DELAYED_WORK(&dev->pb_work, amd_pmf_invoke_cmd);
+ return 0;
}
void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev)
{
+ cancel_delayed_work_sync(&dev->pb_work);
amd_pmf_tee_deinit(dev);
}
--
2.25.1
^ permalink raw reply related
* [PATCH v5 00/17] Introduce PMF Smart PC Solution Builder Feature
From: Shyam Sundar S K @ 2023-11-17 8:07 UTC (permalink / raw)
To: hdegoede, markgross, ilpo.jarvinen, basavaraj.natikar, jikos,
benjamin.tissoires
Cc: Patil.Reddy, mario.limonciello, platform-driver-x86, linux-input,
Shyam Sundar S K
Smart PC Solutions Builder allows for OEM to define a large number of
custom system states to dynamically switch to. The system states are
referred to as policies, and multiple policies can be loaded onto the
system at any given time, however only one policy can be active at a
given time.
Policy is a combination of PMF input and output capabilities. The inputs
are the incoming information from the other kernel subsystems like LID
state, Sensor info, GPU info etc and the actions are the updating the
power limits of SMU etc.
The policy binary is signed and encrypted by a special key from AMD. This
policy binary shall have the inputs and outputs which the OEMs can build
for the platform customization that can enhance the user experience and
system behavior.
This series adds the initial support for Smart PC solution to PMF driver.
Note that, on platforms where CnQF and Smart PC is advertised, Smart PC
shall have higher precedence and same applies for Auto Mode.
v4->v5:
---------
- Remove PMF-GPU interface from amdgpu driver and add DRM/backlight
changes within PMF
- Add module_softdep for AMDGPU
- remove error checks for debugfs_create_file()
- Add "Reviewed-by:" tags
- Add kerneldoc for kernel-wide headers
- Add checks for acpi_backlight_native
- Add early return for SFH path
- other cosmetic changes
v3->v4:
---------
- Split v3 9/16 into 2 patches, that addresses using generic fn names
- Add softdep [Ilpo] instead of request_module()
- return proper ACPI status [Mario]
- Update comments in code [Mario]
- Remove missed double _ remarks
- handle battery status branches [Ilpo]
- Address KASAN problems
v2->v3:
---------
- Remove pci_get_device() for getting gpu handle
- add .suspend handler for pmf driver
- remove unwanted type caste
- Align comments, spaces etc.
- add wrapper for print_hex_dump_debug()
- Remove lkp tags in commit-msg
- Add macros for magic numbers
- use right format specifiers for printing
- propagate error codes back to the caller
- remove unwanted comments
v1->v2:
---------
- Remove __func__ macros
- Remove manual function names inside prints
- Handle tee_shm_get_va() failure
- Remove double _
- Add meaningful prints
- pass amd_pmf_set_dram_addr() failure errors
- Add more information to commit messages
- use right format specifiers
- use devm_ioremap() instead of ioremap()
- address unsigned long vs u32 problems
- Fix lkp reported issues
- Add amd_pmf_remove_pb() to remove the debugfs files created(if any).
- Make amd_pmf_open_pb() as static.
- Add cooling device APIs for controlling amdgpu backlight
- handle amd_pmf_apply_policies() failures
- Split v1 14/15 into 2 patches further
- use linux/units.h for better handling
- add "depends on" AMD_SFH_HID for interaction with SFH
- other cosmetic remarks
Basavaraj Natikar (3):
HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()
platform/x86/amd/pmf: Add PMF-AMDSFH interface for HPD
platform/x86/amd/pmf: Add PMF-AMDSFH interface for ALS
Shyam Sundar S K (14):
platform/x86/amd/pmf: Add PMF TEE interface
platform/x86/amd/pmf: Add support for PMF-TA interaction
platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr()
platform/x86/amd/pmf: Add support for PMF Policy Binary
platform/x86/amd/pmf: change amd_pmf_init_features() call sequence
platform/x86/amd/pmf: Add support to get inputs from other subsystems
platform/x86/amd/pmf: Add support update p3t limit
platform/x86/amd/pmf: Add support to update system state
platform/x86/amd/pmf: Make source_as_str() as non-static
platform/x86/amd/pmf: Add facility to dump TA inputs
platform/x86/amd/pmf: Add capability to sideload of policy binary
platform/x86/amd/pmf: dump policy binary data
platform/x86/amd/pmf: Add PMF-AMDGPU get interface
platform/x86/amd/pmf: Add PMF-AMDGPU set interface
Documentation/admin-guide/index.rst | 1 +
Documentation/admin-guide/pmf.rst | 24 +
drivers/hid/amd-sfh-hid/amd_sfh_common.h | 6 +
drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c | 28 +-
drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c | 17 +
.../amd-sfh-hid/sfh1_1/amd_sfh_interface.c | 47 ++
.../amd-sfh-hid/sfh1_1/amd_sfh_interface.h | 1 +
drivers/platform/x86/amd/pmf/Kconfig | 2 +
drivers/platform/x86/amd/pmf/Makefile | 3 +-
drivers/platform/x86/amd/pmf/acpi.c | 37 ++
drivers/platform/x86/amd/pmf/core.c | 64 +-
drivers/platform/x86/amd/pmf/pmf.h | 223 +++++++
drivers/platform/x86/amd/pmf/spc.c | 227 +++++++
drivers/platform/x86/amd/pmf/sps.c | 5 +-
drivers/platform/x86/amd/pmf/tee-if.c | 564 ++++++++++++++++++
include/linux/amd-pmf-io.h | 50 ++
16 files changed, 1269 insertions(+), 30 deletions(-)
create mode 100644 Documentation/admin-guide/pmf.rst
create mode 100644 drivers/platform/x86/amd/pmf/spc.c
create mode 100644 drivers/platform/x86/amd/pmf/tee-if.c
create mode 100644 include/linux/amd-pmf-io.h
--
2.25.1
^ permalink raw reply
* Re: [PATCH v4 13/17] platform/x86/amd/pmf: Add PMF-AMDGPU get interface
From: Shyam Sundar S K @ 2023-11-17 8:04 UTC (permalink / raw)
To: Hans de Goede, Mario Limonciello, Christian König,
Ilpo Järvinen
Cc: markgross, basavaraj.natikar, jikos, benjamin.tissoires,
alexander.deucher, Xinhui.Pan, airlied, daniel, Patil.Reddy,
platform-driver-x86, linux-input, amd-gfx, dri-devel
In-Reply-To: <e143bbe2-212c-cfc8-131f-8ec9c0bff56d@redhat.com>
Hi Hans,
Apologies for the long delay.
On 10/19/2023 12:38 AM, Hans de Goede wrote:
> Hi,
>
> I was not following this at first, so my apologies for
> jumping in in the middle of the thread:
>
>
> <snip>
>
>>>>>> +static int amd_pmf_gpu_get_cur_state(struct thermal_cooling_device *cooling_dev,
>>>>>> + unsigned long *state)
>>>>>> +{
>>>>>> + struct backlight_device *bd;
>>>>>> +
>>>>>> + if (!acpi_video_backlight_use_native())
>>>>>> + return -ENODEV;
>>>>>> +
>>>>>> + bd = backlight_device_get_by_type(BACKLIGHT_RAW);
>>>>>> + if (!bd)
>>>>>> + return -ENODEV;
>>>>>> +
>>>>>> + *state = backlight_get_brightness(bd);
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static int amd_pmf_gpu_get_max_state(struct thermal_cooling_device *cooling_dev,
>>>>>> + unsigned long *state)
>>>>>> +{
>>>>>> + struct backlight_device *bd;
>>>>>> +
>>>>>> + if (!acpi_video_backlight_use_native())
>>>>>> + return -ENODEV;
>>>>>> +
>>>>>> + bd = backlight_device_get_by_type(BACKLIGHT_RAW);
>>>>>> + if (!bd)
>>>>>> + return -ENODEV;
>>>>>> +
>>>>>> + if (backlight_is_blank(bd))
>>>>>> + *state = 0;
>>>>>> + else
>>>>>> + *state = bd->props.max_brightness;
>>>>>> +
>>>>>> + return 0;
>>>>>> +}
>>>>>> +
>>>>>> +static const struct thermal_cooling_device_ops bd_cooling_ops = {
>>>>>> + .get_max_state = amd_pmf_gpu_get_max_state,
>>>>>> + .get_cur_state = amd_pmf_gpu_get_cur_state,
>>>>>> +};
>
> So first of all, good to see that this is using the
> thermal_cooling_device APIs now, that is great thank you.
>
> But the whole idea behind using the thermal_cooling_device APIs
> is that amdgpu exports the cooling_device itself, rather then have
> the AMD PMF code export it. Now the AMD PMF code is still poking
> at the backlight_device itself, while the idea was to delegate
> this to the GPU driver.
>
> Actually seeing all the acpi_video_backlight_use_native()
> checks here, I wonder why only have this work with native backlight
> control. One step better would be to add thermal_cooling_device
> support to the backlight core in:
> drivers/video/backlight/backlight.c
>
> Then it will work with any backlight control provider!
>
>
>
> Last but not least this code MUST not call
> acpi_video_backlight_use_native()
>
> No code other then native GPU drivers must ever call
> acpi_video_backlight_use_native(). This special function
> not only checks if the native backlight control is the
> one which the detection code in drivers/acpi/video_detect.c
> has selected, it also signals to video_detect.c that
> native GPU backlight control is available.
>
> So by calling this in the AMD PMF code you are now
> telling video_detect.c that native GPU backlight control
> is available on all systems where AMD PMF runs.
>
> As I already said I really believe the whole cooling
> device should be registered somewhere else. But if you
> do end up sticking with this then you MUST replace
> the acpi_video_backlight_use_native() calls with:
>
> if (acpi_video_get_backlight_type() == acpi_backlight_native) {...}
Thank you very much for your detailed feedback. This helped.
I have moved the code from amdgpu to PMF driver which has changes for
DRM. This also has changed w.r.t thermal device change what you suggested.
I have used the checks where ever appropriate:
acpi_video_get_backlight_type() == acpi_backlight_native
Kindly take a look at v5 submission.
Thanks,
Shyam
>
> Regards,
>
> Hans
>
>
>
^ permalink raw reply
* Re: [PATCH v4 13/17] platform/x86/amd/pmf: Add PMF-AMDGPU get interface
From: Shyam Sundar S K @ 2023-11-17 8:00 UTC (permalink / raw)
To: Christian König, Mario Limonciello, Ilpo Järvinen,
Daniel Vetter, Dave Airlie
Cc: Hans de Goede, markgross, basavaraj.natikar, jikos,
benjamin.tissoires, alexander.deucher, Xinhui.Pan, airlied,
Patil.Reddy, platform-driver-x86, linux-input, amd-gfx, dri-devel
In-Reply-To: <0c816746-7f52-442f-aea5-0d8c713aa2ce@amd.com>
On 10/19/2023 2:31 PM, Christian König wrote:
> Am 18.10.23 um 19:05 schrieb Shyam Sundar S K:
>>
>> On 10/18/2023 9:37 PM, Christian König wrote:
>>> Am 18.10.23 um 17:47 schrieb Mario Limonciello:
>>>> On 10/18/2023 08:40, Christian König wrote:
>>>>>
>>>>> Am 18.10.23 um 11:28 schrieb Shyam Sundar S K:
>>>>>> On 10/18/2023 2:50 PM, Ilpo Järvinen wrote:
>>>>>>> On Wed, 18 Oct 2023, Shyam Sundar S K wrote:
>>>>>>>
>>>>>>>> In order to provide GPU inputs to TA for the Smart PC solution
>>>>>>>> to work, we
>>>>>>>> need to have interface between the PMF driver and the AMDGPU
>>>>>>>> driver.
>>>>>>>>
>>>>>>>> Add the initial code path for get interface from AMDGPU.
>>>>>>>>
>>>>>>>> Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
>>>>>>>> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
>>>>>>>> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
>>>>>>>> ---
>>>>>>>> drivers/gpu/drm/amd/amdgpu/Makefile | 2 +
>>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 +
>>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c | 138
>>>>>>>> ++++++++++++++++++++++++
>>>>>>>> drivers/platform/x86/amd/pmf/Kconfig | 1 +
>>>>>>>> drivers/platform/x86/amd/pmf/core.c | 1 +
>>>>>>>> drivers/platform/x86/amd/pmf/pmf.h | 3 +
>>>>>>>> drivers/platform/x86/amd/pmf/spc.c | 13 +++
>>>>>>>> drivers/platform/x86/amd/pmf/tee-if.c | 26 +++++
>>>>>>>> include/linux/amd-pmf-io.h | 35 ++++++
>>>>>>>> 9 files changed, 220 insertions(+)
>>>>>>>> create mode 100644 drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
>>>>>>>> create mode 100644 include/linux/amd-pmf-io.h
>>>>>>>>
>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile
>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/Makefile
>>>>>>>> index 384b798a9bad..7fafccefbd7a 100644
>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/Makefile
>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/Makefile
>>>>>>>> @@ -86,6 +86,8 @@ amdgpu-$(CONFIG_PROC_FS) += amdgpu_fdinfo.o
>>>>>>>> amdgpu-$(CONFIG_PERF_EVENTS) += amdgpu_pmu.o
>>>>>>>> +amdgpu-$(CONFIG_AMD_PMF) += amdgpu_pmf.o
>>>>>>>> +
>>>>>>>> # add asic specific block
>>>>>>>> amdgpu-$(CONFIG_DRM_AMDGPU_CIK)+= cik.o cik_ih.o \
>>>>>>>> dce_v8_0.o gfx_v7_0.o cik_sdma.o uvd_v4_2.o vce_v2_0.o
>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>>>>>>>> index a79d53bdbe13..26ffa1b4fe57 100644
>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>>>>>>>> @@ -50,6 +50,7 @@
>>>>>>>> #include <linux/hashtable.h>
>>>>>>>> #include <linux/dma-fence.h>
>>>>>>>> #include <linux/pci.h>
>>>>>>>> +#include <linux/amd-pmf-io.h>
>>>>>>>> #include <drm/ttm/ttm_bo.h>
>>>>>>>> #include <drm/ttm/ttm_placement.h>
>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
>>>>>>>> new file mode 100644
>>>>>>>> index 000000000000..ac981848df50
>>>>>>>> --- /dev/null
>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
>>>>>>>> @@ -0,0 +1,138 @@
>>>>>>>> +/*
>>>>>>>> + * Copyright 2023 Advanced Micro Devices, Inc.
>>>>>>>> + *
>>>>>>>> + * Permission is hereby granted, free of charge, to any person
>>>>>>>> obtaining a
>>>>>>>> + * copy of this software and associated documentation files
>>>>>>>> (the "Software"),
>>>>>>>> + * to deal in the Software without restriction, including
>>>>>>>> without limitation
>>>>>>>> + * the rights to use, copy, modify, merge, publish, distribute,
>>>>>>>> sublicense,
>>>>>>>> + * and/or sell copies of the Software, and to permit persons to
>>>>>>>> whom the
>>>>>>>> + * Software is furnished to do so, subject to the following
>>>>>>>> conditions:
>>>>>>>> + *
>>>>>>>> + * The above copyright notice and this permission notice shall
>>>>>>>> be included in
>>>>>>>> + * all copies or substantial portions of the Software.
>>>>>>>> + *
>>>>>>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
>>>>>>>> KIND, EXPRESS OR
>>>>>>>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>>>>>>>> MERCHANTABILITY,
>>>>>>>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
>>>>>>>> EVENT SHALL
>>>>>>>> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY
>>>>>>>> CLAIM, DAMAGES OR
>>>>>>>> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
>>>>>>>> OTHERWISE,
>>>>>>>> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
>>>>>>>> THE USE OR
>>>>>>>> + * OTHER DEALINGS IN THE SOFTWARE.
>>>>>>> This is MIT, right? Add the required SPDX-License-Identifier line
>>>>>>> for it
>>>>>>> at the top of the file, thank you.
>>>>>>>
>>>>>> all the files in drivers/gpu/drm/amd/amdgpu/* carry the same
>>>>>> license
>>>>>> text. So, have retained it to maintain uniformity.
>>>>> Please add the SPDX License Identifier for any file you add.
>> OK. I thought to keep it same like the other files. I will change this
>> to SPDX in the next revision.
>>
>>>>> Apart from that the whole approach of attaching this directly to
>>>>> amdgpu looks extremely questionable to me.
>>>>>
>>>> What's the long term outlook for things that are needed directly
>>>> from amdgpu? Is there going to be more besides the backlight and
>>>> the display count/type?
>>> Yeah, that goes into the same direction as my concern.
>> PMF is an APU only feature and will need inputs from multiple
>> subsystems (in this case its GPU) to send changing system information
>> to PMF TA (Trusted Application, running on ASP/PSP) as input.
>>
>> Its not only about the display count/type and backlight, there are
>> many others things in pipe like the GPU engine running time,
>> utilization percentage etc, that guide the TA to make better decisions.
>>
>> This series is only targeted to build the initial plubming with the
>> subsystems inside the kernel and later keep adding changes to get more
>> information from other subsystems.
>
> Yeah, and that's what I strongly disagree on. Don't come up with such
> an approach without consulting with upstream maintainers first.
PMF is there since sometime and this is an additional feature, so you
should presume that its being consulted.
>
> What you propose here is a system wide framework for improving power
> management, that's fine. The problem is that we already have something
> very similar in the thermal framework.
>
> See for example the Intel solution here
> https://docs.kernel.org/driver-api/thermal/intel_dptf.html
>
> From the general design the job of the amdgpu driver is to drive the
> display hardware. So this should in general be completely decoupled
> from this driver. As Mario suggested as well you can iterate over the
> connected displays independently. Same thing for the backlight.
Well. Same should be case even with PMF driver as well. It should
provide overall interfaces for OEMs and ecosystem partners.
So, PMF should not have the DRM related changes IMHO and should have
an interface defined to talk to AMDGPU.
>
> When it comes to hardware state like GPU engine utilization then we
> don't have that inside amdgpu either.
I spent sometime to get the stats for GPU utilization and other
information required to be passed to PMF TA, but the results were not
really favourable (maybe these could be issues in the PMF-TA as well).
So for now, I think it makes sense to have the DRM related code
changes within the PMF driver. But once we have other inputs from the
GPU/DRM subsystem ready, IMO GPU driver should provide these inputs
back to PMF driver.
Let me know if you have a different opinion on this.
Thanks,
Shyam
>
> Regards,
> Christian.
>
>>
>> that is the reason you see that, this patch proposes amd-pmf-io.h as
>> the interface to talk to other subsystems. For the initial path, I
>> have opted to get information from SFH and GPU drivers. But this is
>> meant to grow in future.
>>
>>>> At least for the display count I suppose one way that it could be
>>>> "decoupled" from amdgpu is to use drm_for_each_connector_iter to
>>>> iterate all the connectors and then count the connected ones.
>>> And what if the number of connected displays change? How is amdgpu
>>> supposed to signal events like that?
>> PMF driver polls for the information based on a configurable sampling
>> frequency.
>>
>> you can look at amd_pmf_get_gpu_info(), that gets called from
>> amd_pmf_populate_ta_inputs() in spc.c in this proposed series.
>>
>> Thanks,
>> Shyam
>>
>>> This whole solution doesn't looks well thought through.
>>>
>>> Regards,
>>> Christian.
>>>
>>>>> Regards,
>>>>> Christian.
>>>>>
>>>>>>>> + *
>>>>>>>> + * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
>>>>>>>> + *
>>>>>>>> + */
>>>>>>> Remove the extra empty line at the end of the comment.
>>>>>>>
>>>>>> I just took the standard template for all the gpu files. Is that
>>>>>> OK to
>>>>>> retain the blank line?
>>>>>>
>>>>>> If not, I can remove it in the next version.
>>>>>>
>>>>>> Rest all remarks I will address.
>>>>>>
>>>>>> Thanks,
>>>>>> Shyam
>>>>>>
>>>>>>>> +
>>>>>>>> +#include <linux/backlight.h>
>>>>>>>> +#include "amdgpu.h"
>>>>>>>> +
>>>>>>>> +int amd_pmf_get_gfx_data(struct amd_gpu_pmf_data *pmf)
>>>>>>>> +{
>>>>>>>> + struct drm_device *drm_dev = pci_get_drvdata(pmf->gpu_dev);
>>>>>>>> + struct drm_mode_config *mode_config = &drm_dev->mode_config;
>>>>>>>> + struct amdgpu_device *adev = drm_to_adev(drm_dev);
>>>>>>>> + struct drm_connector_list_iter iter;
>>>>>>>> + struct drm_connector *connector;
>>>>>>>> + int i = 0;
>>>>>>>> +
>>>>>>>> + /* Reset the count to zero */
>>>>>>>> + pmf->display_count = 0;
>>>>>>>> + if (!(adev->flags & AMD_IS_APU)) {
>>>>>>>> + DRM_ERROR("PMF-AMDGPU interface not supported\n");
>>>>>>>> + return -ENODEV;
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + mutex_lock(&mode_config->mutex);
>>>>>>>> + drm_connector_list_iter_begin(drm_dev, &iter);
>>>>>>>> + drm_for_each_connector_iter(connector, &iter) {
>>>>>>>> + if (connector->status == connector_status_connected)
>>>>>>>> + pmf->display_count++;
>>>>>>>> + if (connector->status != pmf->con_status[i])
>>>>>>>> + pmf->con_status[i] = connector->status;
>>>>>>>> + if (connector->connector_type != pmf->connector_type[i])
>>>>>>>> + pmf->connector_type[i] = connector->connector_type;
>>>>>>>> +
>>>>>>>> + i++;
>>>>>>>> + if (i >= MAX_SUPPORTED)
>>>>>>>> + break;
>>>>>>>> + }
>>>>>>>> + drm_connector_list_iter_end(&iter);
>>>>>>>> + mutex_unlock(&mode_config->mutex);
>>>>>>>> +
>>>>>>>> + return 0;
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL_GPL(amd_pmf_get_gfx_data);
>>>>>>>> +
>>>>>>>> +static int amd_pmf_gpu_get_cur_state(struct
>>>>>>>> thermal_cooling_device *cooling_dev,
>>>>>>>> + unsigned long *state)
>>>>>>>> +{
>>>>>>>> + struct backlight_device *bd;
>>>>>>>> +
>>>>>>>> + if (!acpi_video_backlight_use_native())
>>>>>>>> + return -ENODEV;
>>>>>>>> +
>>>>>>>> + bd = backlight_device_get_by_type(BACKLIGHT_RAW);
>>>>>>>> + if (!bd)
>>>>>>>> + return -ENODEV;
>>>>>>>> +
>>>>>>>> + *state = backlight_get_brightness(bd);
>>>>>>>> +
>>>>>>>> + return 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static int amd_pmf_gpu_get_max_state(struct
>>>>>>>> thermal_cooling_device *cooling_dev,
>>>>>>>> + unsigned long *state)
>>>>>>>> +{
>>>>>>>> + struct backlight_device *bd;
>>>>>>>> +
>>>>>>>> + if (!acpi_video_backlight_use_native())
>>>>>>>> + return -ENODEV;
>>>>>>>> +
>>>>>>>> + bd = backlight_device_get_by_type(BACKLIGHT_RAW);
>>>>>>>> + if (!bd)
>>>>>>>> + return -ENODEV;
>>>>>>>> +
>>>>>>>> + if (backlight_is_blank(bd))
>>>>>>>> + *state = 0;
>>>>>>>> + else
>>>>>>>> + *state = bd->props.max_brightness;
>>>>>>>> +
>>>>>>>> + return 0;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static const struct thermal_cooling_device_ops bd_cooling_ops
>>>>>>>> = {
>>>>>>>> + .get_max_state = amd_pmf_gpu_get_max_state,
>>>>>>>> + .get_cur_state = amd_pmf_gpu_get_cur_state,
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +int amd_pmf_gpu_init(struct amd_gpu_pmf_data *pmf)
>>>>>>>> +{
>>>>>>>> + struct drm_device *drm_dev = pci_get_drvdata(pmf->gpu_dev);
>>>>>>>> + struct amdgpu_device *adev = drm_to_adev(drm_dev);
>>>>>>>> +
>>>>>>>> + if (!(adev->flags & AMD_IS_APU)) {
>>>>>>>> + DRM_ERROR("PMF-AMDGPU interface not supported\n");
>>>>>>>> + return -ENODEV;
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + if (!acpi_video_backlight_use_native())
>>>>>>>> + return -ENODEV;
>>>>>>>> +
>>>>>>>> + pmf->raw_bd = backlight_device_get_by_type(BACKLIGHT_RAW);
>>>>>>>> + if (!pmf->raw_bd)
>>>>>>>> + return -ENODEV;
>>>>>>>> +
>>>>>>>> + pmf->cooling_dev =
>>>>>>>> thermal_cooling_device_register("pmf_gpu_bd",
>>>>>>>> + pmf, &bd_cooling_ops);
>>>>>>>> + if (IS_ERR(pmf->cooling_dev))
>>>>>>>> + return -ENODEV;
>>>>>>>> +
>>>>>>>> + return 0;
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL_GPL(amd_pmf_gpu_init);
>>>>>>>> +
>>>>>>>> +void amd_pmf_gpu_deinit(struct amd_gpu_pmf_data *pmf)
>>>>>>>> +{
>>>>>>>> + thermal_cooling_device_unregister(pmf->cooling_dev);
>>>>>>>> +}
>>>>>>>> +EXPORT_SYMBOL_GPL(amd_pmf_gpu_deinit);
>>>>>>>> diff --git a/drivers/platform/x86/amd/pmf/Kconfig
>>>>>>>> b/drivers/platform/x86/amd/pmf/Kconfig
>>>>>>>> index f246252bddd8..7f430de7af44 100644
>>>>>>>> --- a/drivers/platform/x86/amd/pmf/Kconfig
>>>>>>>> +++ b/drivers/platform/x86/amd/pmf/Kconfig
>>>>>>>> @@ -10,6 +10,7 @@ config AMD_PMF
>>>>>>>> depends on AMD_NB
>>>>>>>> select ACPI_PLATFORM_PROFILE
>>>>>>>> depends on TEE && AMDTEE
>>>>>>>> + depends on DRM_AMDGPU
>>>>>>>> help
>>>>>>>> This driver provides support for the AMD Platform
>>>>>>>> Management Framework.
>>>>>>>> The goal is to enhance end user experience by making AMD
>>>>>>>> PCs smarter,
>>>>>>>> diff --git a/drivers/platform/x86/amd/pmf/core.c
>>>>>>>> b/drivers/platform/x86/amd/pmf/core.c
>>>>>>>> index 4b8156033fa6..c59ba527ff49 100644
>>>>>>>> --- a/drivers/platform/x86/amd/pmf/core.c
>>>>>>>> +++ b/drivers/platform/x86/amd/pmf/core.c
>>>>>>>> @@ -411,6 +411,7 @@ static int amd_pmf_probe(struct
>>>>>>>> platform_device *pdev)
>>>>>>>> }
>>>>>>>> dev->cpu_id = rdev->device;
>>>>>>>> + dev->root = rdev;
>>>>>>>> err = amd_smn_read(0, AMD_PMF_BASE_ADDR_LO, &val);
>>>>>>>> if (err) {
>>>>>>>> diff --git a/drivers/platform/x86/amd/pmf/pmf.h
>>>>>>>> b/drivers/platform/x86/amd/pmf/pmf.h
>>>>>>>> index 8712299ad52b..615cd3a31986 100644
>>>>>>>> --- a/drivers/platform/x86/amd/pmf/pmf.h
>>>>>>>> +++ b/drivers/platform/x86/amd/pmf/pmf.h
>>>>>>>> @@ -13,6 +13,7 @@
>>>>>>>> #include <linux/acpi.h>
>>>>>>>> #include <linux/platform_profile.h>
>>>>>>>> +#include <linux/amd-pmf-io.h>
>>>>>>>> #define POLICY_BUF_MAX_SZ 0x4b000
>>>>>>>> #define POLICY_SIGN_COOKIE 0x31535024
>>>>>>>> @@ -228,9 +229,11 @@ struct amd_pmf_dev {
>>>>>>>> void *shbuf;
>>>>>>>> struct delayed_work pb_work;
>>>>>>>> struct pmf_action_table *prev_data;
>>>>>>>> + struct amd_gpu_pmf_data gfx_data;
>>>>>>>> u64 policy_addr;
>>>>>>>> void *policy_base;
>>>>>>>> bool smart_pc_enabled;
>>>>>>>> + struct pci_dev *root;
>>>>>>>> };
>>>>>>>> struct apmf_sps_prop_granular {
>>>>>>>> diff --git a/drivers/platform/x86/amd/pmf/spc.c
>>>>>>>> b/drivers/platform/x86/amd/pmf/spc.c
>>>>>>>> index 512e0c66efdc..cf4962ef97c2 100644
>>>>>>>> --- a/drivers/platform/x86/amd/pmf/spc.c
>>>>>>>> +++ b/drivers/platform/x86/amd/pmf/spc.c
>>>>>>>> @@ -44,6 +44,10 @@ void amd_pmf_dump_ta_inputs(struct
>>>>>>>> amd_pmf_dev *dev, struct ta_pmf_enact_table *
>>>>>>>> dev_dbg(dev->dev, "Max C0 Residency : %u\n",
>>>>>>>> in->ev_info.max_c0residency);
>>>>>>>> dev_dbg(dev->dev, "GFX Busy : %u\n",
>>>>>>>> in->ev_info.gfx_busy);
>>>>>>>> dev_dbg(dev->dev, "Connected Display Count : %u\n",
>>>>>>>> in->ev_info.monitor_count);
>>>>>>>> + dev_dbg(dev->dev, "Primary Display Type : %s\n",
>>>>>>>> + drm_get_connector_type_name(in->ev_info.display_type));
>>>>>>>> + dev_dbg(dev->dev, "Primary Display State : %s\n",
>>>>>>>> in->ev_info.display_state ?
>>>>>>>> + "Connected" : "disconnected/unknown");
>>>>>>>> dev_dbg(dev->dev, "LID State : %s\n",
>>>>>>>> in->ev_info.lid_state ? "Close" : "Open");
>>>>>>>> dev_dbg(dev->dev, "==== TA inputs END ====\n");
>>>>>>>> }
>>>>>>>> @@ -146,6 +150,14 @@ static int amd_pmf_get_slider_info(struct
>>>>>>>> amd_pmf_dev *dev, struct ta_pmf_enact_
>>>>>>>> return 0;
>>>>>>>> }
>>>>>>>> +static void amd_pmf_get_gpu_info(struct amd_pmf_dev *dev,
>>>>>>>> struct ta_pmf_enact_table *in)
>>>>>>>> +{
>>>>>>>> + amd_pmf_get_gfx_data(&dev->gfx_data);
>>>>>>>> + in->ev_info.monitor_count = dev->gfx_data.display_count;
>>>>>>>> + in->ev_info.display_type = dev->gfx_data.connector_type[0];
>>>>>>>> + in->ev_info.display_state = dev->gfx_data.con_status[0];
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev,
>>>>>>>> struct ta_pmf_enact_table *in)
>>>>>>>> {
>>>>>>>> /* TA side lid open is 1 and close is 0, hence the !
>>>>>>>> here */
>>>>>>>> @@ -154,4 +166,5 @@ void amd_pmf_populate_ta_inputs(struct
>>>>>>>> amd_pmf_dev *dev, struct ta_pmf_enact_tab
>>>>>>>> amd_pmf_get_smu_info(dev, in);
>>>>>>>> amd_pmf_get_battery_info(dev, in);
>>>>>>>> amd_pmf_get_slider_info(dev, in);
>>>>>>>> + amd_pmf_get_gpu_info(dev, in);
>>>>>>>> }
>>>>>>>> diff --git a/drivers/platform/x86/amd/pmf/tee-if.c
>>>>>>>> b/drivers/platform/x86/amd/pmf/tee-if.c
>>>>>>>> index 2f5fb8623c20..956e66b78605 100644
>>>>>>>> --- a/drivers/platform/x86/amd/pmf/tee-if.c
>>>>>>>> +++ b/drivers/platform/x86/amd/pmf/tee-if.c
>>>>>>>> @@ -9,6 +9,7 @@
>>>>>>>> */
>>>>>>>> #include <linux/debugfs.h>
>>>>>>>> +#include <linux/pci.h>
>>>>>>>> #include <linux/tee_drv.h>
>>>>>>>> #include <linux/uuid.h>
>>>>>>>> #include "pmf.h"
>>>>>>>> @@ -357,6 +358,19 @@ static int amd_pmf_get_bios_buffer(struct
>>>>>>>> amd_pmf_dev *dev)
>>>>>>>> return amd_pmf_start_policy_engine(dev);
>>>>>>>> }
>>>>>>>> +static int amd_pmf_get_gpu_handle(struct pci_dev *pdev, void
>>>>>>>> *data)
>>>>>>>> +{
>>>>>>>> + struct amd_pmf_dev *dev = data;
>>>>>>>> +
>>>>>>>> + if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->devfn == 0) {
>>>>>>>> + /* Found the amdgpu handle from the pci root after
>>>>>>>> walking through the pci bus */
>>>>>>> If you insist on having this comment, make it a function comment
>>>>>>> instead
>>>>>>> (with appropriate modifications into the content of it) but I
>>>>>>> personally
>>>>>>> don't find it that useful so it could be just dropped as well,
>>>>>>> IMO.
>>>>>>>
>>>>>>>> + dev->gfx_data.gpu_dev = pdev;
>>>>>>>> + return 1; /* Stop walking */
>>>>>>>> + }
>>>>>>>> +
>>>>>>>> + return 0; /* Continue walking */
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> static int amd_pmf_amdtee_ta_match(struct
>>>>>>>> tee_ioctl_version_data *ver, const void *data)
>>>>>>>> {
>>>>>>>> return ver->impl_id == TEE_IMPL_ID_AMDTEE;
>>>>>>>> @@ -446,6 +460,15 @@ int amd_pmf_init_smart_pc(struct
>>>>>>>> amd_pmf_dev *dev)
>>>>>>>> INIT_DELAYED_WORK(&dev->pb_work, amd_pmf_invoke_cmd);
>>>>>>>> amd_pmf_set_dram_addr(dev);
>>>>>>>> amd_pmf_get_bios_buffer(dev);
>>>>>>>> +
>>>>>>>> + /* Get amdgpu handle */
>>>>>>> Useless comment.
>>>>>>>
>>>>>>>> + pci_walk_bus(dev->root->bus, amd_pmf_get_gpu_handle, dev);
>>>>>>>> + if (!dev->gfx_data.gpu_dev)
>>>>>>>> + dev_err(dev->dev, "GPU handle not found!\n");
>>>>>>>> +
>>>>>>>> + if (!amd_pmf_gpu_init(&dev->gfx_data))
>>>>>>>> + dev->gfx_data.gpu_dev_en = true;
>>>>>>>> +
>>>>>>>> dev->prev_data = kzalloc(sizeof(*dev->prev_data),
>>>>>>>> GFP_KERNEL);
>>>>>>>> if (!dev->prev_data)
>>>>>>>> return -ENOMEM;
>>>>>>>> @@ -461,5 +484,8 @@ void amd_pmf_deinit_smart_pc(struct
>>>>>>>> amd_pmf_dev *dev)
>>>>>>>> kfree(dev->prev_data);
>>>>>>>> kfree(dev->policy_buf);
>>>>>>>> cancel_delayed_work_sync(&dev->pb_work);
>>>>>>>> + if (dev->gfx_data.gpu_dev_en)
>>>>>>>> + amd_pmf_gpu_deinit(&dev->gfx_data);
>>>>>>>> + pci_dev_put(dev->gfx_data.gpu_dev);
>>>>>>>> amd_pmf_tee_deinit(dev);
>>>>>>>> }
>>>>>>>> diff --git a/include/linux/amd-pmf-io.h
>>>>>>>> b/include/linux/amd-pmf-io.h
>>>>>>>> new file mode 100644
>>>>>>>> index 000000000000..5f79e66a41b3
>>>>>>>> --- /dev/null
>>>>>>>> +++ b/include/linux/amd-pmf-io.h
>>>>>>>> @@ -0,0 +1,35 @@
>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0 */
>>>>>>>> +/*
>>>>>>>> + * AMD Platform Management Framework Interface
>>>>>>>> + *
>>>>>>>> + * Copyright (c) 2023, Advanced Micro Devices, Inc.
>>>>>>>> + * All Rights Reserved.
>>>>>>>> + *
>>>>>>>> + * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
>>>>>>>> + */
>>>>>>>> +
>>>>>>>> +#ifndef AMD_PMF_IO_H
>>>>>>>> +#define AMD_PMF_IO_H
>>>>>>>> +
>>>>>>>> +#include <acpi/video.h>
>>>>>>>> +#include <drm/drm_connector.h>
>>>>>>>> +#include <linux/backlight.h>
>>>>>>>> +#include <linux/thermal.h>
>>>>>>>> +
>>>>>>>> +#define MAX_SUPPORTED 4
>>>>>>>> +
>>>>>>>> +/* amdgpu */
>>>>>>> Document the structure properly with kerneldoc instead of an
>>>>>>> unhelpful
>>>>>>> comment like above :-). Please also check if you add any other
>>>>>>> structs
>>>>>>> into kernel-wide headers that you didn't document yet. Or fields
>>>>>>> into
>>>>>>> existing structs.
>>>>>>>
>>>>>>>> +struct amd_gpu_pmf_data {
>>>>>>>> + struct pci_dev *gpu_dev;
>>>>>>>> + struct backlight_device *raw_bd;
>>>>>>>> + struct thermal_cooling_device *cooling_dev;
>>>>>>>> + enum drm_connector_status con_status[MAX_SUPPORTED];
>>>>>>>> + int display_count;
>>>>>>>> + int connector_type[MAX_SUPPORTED];
>>>>>>>> + bool gpu_dev_en;
>>>>>>>> +};
>>>>>>>> +
>>>>>>>> +int amd_pmf_get_gfx_data(struct amd_gpu_pmf_data *pmf);
>>>>>>>> +int amd_pmf_gpu_init(struct amd_gpu_pmf_data *pmf);
>>>>>>>> +void amd_pmf_gpu_deinit(struct amd_gpu_pmf_data *pmf);
>>>>>>>> +#endif
>>>>>>>>
>
^ permalink raw reply
* Re: [PATCH v4 10/17] platform/x86/amd/pmf: Add facility to dump TA inputs
From: Shyam Sundar S K @ 2023-11-17 7:46 UTC (permalink / raw)
To: Ilpo Järvinen
Cc: Hans de Goede, markgross, basavaraj.natikar, jikos,
benjamin.tissoires, alexander.deucher, christian.koenig,
Xinhui.Pan, airlied, daniel, Patil.Reddy, mario.limonciello,
platform-driver-x86, linux-input, amd-gfx, dri-devel
In-Reply-To: <ef47873-9c61-65c4-4b4f-deef1959de71@linux.intel.com>
Hi Ilpo,
Apologies for the long delay.
On 10/18/2023 2:30 PM, Ilpo Järvinen wrote:
> On Wed, 18 Oct 2023, Shyam Sundar S K wrote:
>
>> PMF driver sends constant inputs to TA which its gets via the other
>> subsystems in the kernel. To debug certain TA issues knowing what inputs
>> being sent to TA becomes critical. Add debug facility to the driver which
>> can isolate Smart PC and TA related issues.
>>
>> Also, make source_as_str() as non-static function as this helper is
>> required outside of sps.c file.
>>
>> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
>> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
>> ---
>> drivers/platform/x86/amd/pmf/pmf.h | 3 +++
>> drivers/platform/x86/amd/pmf/spc.c | 37 +++++++++++++++++++++++++++
>> drivers/platform/x86/amd/pmf/tee-if.c | 1 +
>> 3 files changed, 41 insertions(+)
>>
>> diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
>> index 216a9f795436..593930519039 100644
>> --- a/drivers/platform/x86/amd/pmf/pmf.h
>> +++ b/drivers/platform/x86/amd/pmf/pmf.h
>> @@ -602,6 +602,7 @@ bool is_pprof_balanced(struct amd_pmf_dev *pmf);
>> int amd_pmf_power_slider_update_event(struct amd_pmf_dev *dev);
>> const char *amd_pmf_source_as_str(unsigned int state);
>>
>> +const char *amd_pmf_source_as_str(unsigned int state);
>>
>> int apmf_update_fan_idx(struct amd_pmf_dev *pdev, bool manual, u32 idx);
>> int amd_pmf_set_sps_power_limits(struct amd_pmf_dev *pmf);
>> @@ -632,4 +633,6 @@ int apmf_check_smart_pc(struct amd_pmf_dev *pmf_dev);
>>
>> /* Smart PC - TA interfaces */
>> void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in);
>> +void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in);
>> +
>> #endif /* PMF_H */
>> diff --git a/drivers/platform/x86/amd/pmf/spc.c b/drivers/platform/x86/amd/pmf/spc.c
>> index bd5061fdfdbe..512e0c66efdc 100644
>> --- a/drivers/platform/x86/amd/pmf/spc.c
>> +++ b/drivers/platform/x86/amd/pmf/spc.c
>> @@ -14,6 +14,43 @@
>> #include <linux/units.h>
>> #include "pmf.h"
>>
>> +#ifdef CONFIG_AMD_PMF_DEBUG
>> +static const char *ta_slider_as_str(unsigned int state)
>> +{
>> + switch (state) {
>> + case TA_BEST_PERFORMANCE:
>> + return "PERFORMANCE";
>> + case TA_BETTER_PERFORMANCE:
>> + return "BALANCED";
>> + case TA_BEST_BATTERY:
>> + return "POWER_SAVER";
>> + default:
>> + return "Unknown TA Slider State";
>> + }
>> +}
>> +
>> +void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
>> +{
>> + dev_dbg(dev->dev, "==== TA inputs START ====\n");
>> + dev_dbg(dev->dev, "Slider State : %s\n", ta_slider_as_str(in->ev_info.power_slider));
>> + dev_dbg(dev->dev, "Power Source : %s\n", amd_pmf_source_as_str(in->ev_info.power_source));
>> + dev_dbg(dev->dev, "Battery Percentage : %u\n", in->ev_info.bat_percentage);
>> + dev_dbg(dev->dev, "Designed Battery Capacity : %u\n", in->ev_info.bat_design);
>> + dev_dbg(dev->dev, "Fully Charged Capacity : %u\n", in->ev_info.full_charge_capacity);
>> + dev_dbg(dev->dev, "Drain Rate : %d\n", in->ev_info.drain_rate);
>> + dev_dbg(dev->dev, "Socket Power : %u\n", in->ev_info.socket_power);
>> + dev_dbg(dev->dev, "Skin Temperature : %u\n", in->ev_info.skin_temperature);
>> + dev_dbg(dev->dev, "Avg C0 Residency : %u\n", in->ev_info.avg_c0residency);
>> + dev_dbg(dev->dev, "Max C0 Residency : %u\n", in->ev_info.max_c0residency);
>> + dev_dbg(dev->dev, "GFX Busy : %u\n", in->ev_info.gfx_busy);
>> + dev_dbg(dev->dev, "Connected Display Count : %u\n", in->ev_info.monitor_count);
>> + dev_dbg(dev->dev, "LID State : %s\n", in->ev_info.lid_state ? "Close" : "Open");
>
> "open" / "closed" is generic enough that I think it would warrant adding
> include/linux/string_choices.h helper for it (it should be lowercase
> there but that difference probably is not an issue for these debug
> prints).
>
> I'd also remove that extra space before :.
>
Seems like string_choices.h does not have helper for open/close. So
did not include this change in the next revision. But I have addressed
all your other remarks in v4.
Thanks,
Shyam
^ permalink raw reply
* Re: [PATCH v5 3/3] Input: cap11xx - remove unnecessary IRQ parsing
From: Dmitry Torokhov @ 2023-11-17 2:59 UTC (permalink / raw)
To: Jiri Valek - 2N
Cc: Rob Herring, krzysztof.kozlowski+dt, devicetree, linux-input,
linux-kernel, u.kleine-koenig
In-Reply-To: <f2df3ba6-76d2-4e2e-9c7e-54f6a84464b7@axis.com>
On Thu, Nov 16, 2023 at 08:43:00AM +0100, Jiri Valek - 2N wrote:
> On 11/8/23 20:53, Rob Herring wrote:
> > On Wed, Nov 8, 2023 at 9:57 AM Jiri Valek - 2N <jiriv@axis.com> wrote:
> >>
> >> Separate IRQ parsing is not necessary, I2C core do the job.
> >>
> >> Signed-off-by: Jiri Valek - 2N <jiriv@axis.com>
> >> ---
> >> drivers/input/keyboard/cap11xx.c | 10 ++--------
> >> 1 file changed, 2 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
> >> index 4711ea985627..ccca9936ef25 100644
> >> --- a/drivers/input/keyboard/cap11xx.c
> >> +++ b/drivers/input/keyboard/cap11xx.c
> >> @@ -518,7 +518,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
> >> struct device *dev = &i2c_client->dev;
> >> struct cap11xx_priv *priv;
> >> const struct cap11xx_hw_model *cap;
> >> - int i, error, irq;
> >> + int i, error;
> >> unsigned int val, rev;
> >>
> >> if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
> >> @@ -624,13 +624,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
> >> if (error)
> >> return error;
> >>
> >> - irq = irq_of_parse_and_map(dev->of_node, 0);
> >
> > Probably can drop the include of of_irq.h as well.
> Ack. Thanks for notice!
I replaced it with #include <of.h> and applied, thank you.
--
Dmitry
^ permalink raw reply
* [PATCH 2/2] hid-asus: reset the backlight brightness level on resume
From: Luke D. Jones @ 2023-11-17 1:15 UTC (permalink / raw)
To: jikos; +Cc: benjamin.tissoires, linux-input, linux-kernel, benato.denis96
In-Reply-To: <20231117011556.13067-1-luke@ljones.dev>
From: Denis Benato <benato.denis96@gmail.com>
Some devices managed by this driver automatically set brightness to 0
before entering a suspended state and reset it back to a default
brightness level after the resume:
this has the effect of having the kernel report wrong brightness
status after a sleep, and on some devices (like the Asus RC71L) that
brightness is the intensity of LEDs directly facing the user.
Fix the above issue by setting back brightness to the level it had
before entering a sleep state.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
---
drivers/hid/hid-asus.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index b70673a929a1..78cdfb8b9a7a 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -1000,6 +1000,24 @@ static int asus_start_multitouch(struct hid_device *hdev)
return 0;
}
+static int __maybe_unused asus_resume(struct hid_device *hdev) {
+ struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+ int ret = 0;
+
+ if (drvdata->kbd_backlight) {
+ const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4,
+ drvdata->kbd_backlight->cdev.brightness };
+ ret = asus_kbd_set_report(hdev, buf, sizeof(buf));
+ if (ret < 0) {
+ hid_err(hdev, "Asus failed to set keyboard backlight: %d\n", ret);
+ goto asus_resume_err;
+ }
+ }
+
+asus_resume_err:
+ return ret;
+}
+
static int __maybe_unused asus_reset_resume(struct hid_device *hdev)
{
struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
@@ -1294,6 +1312,7 @@ static struct hid_driver asus_driver = {
.input_configured = asus_input_configured,
#ifdef CONFIG_PM
.reset_resume = asus_reset_resume,
+ .resume = asus_resume,
#endif
.event = asus_event,
.raw_event = asus_raw_event
--
2.42.1
^ permalink raw reply related
* [PATCH 1/2] hid-asus: add const to read-only outgoing usb buffer
From: Luke D. Jones @ 2023-11-17 1:15 UTC (permalink / raw)
To: jikos; +Cc: benjamin.tissoires, linux-input, linux-kernel, benato.denis96
In-Reply-To: <20231117011556.13067-1-luke@ljones.dev>
From: Denis Benato <benato.denis96@gmail.com>
In the function asus_kbd_set_report the parameter buf is read-only
as it gets copied in a memory portion suitable for USB transfer,
but the parameter is not marked as const: add the missing const and mark
const immutable buffers passed to that function.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
---
drivers/hid/hid-asus.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index fd61dba88233..b70673a929a1 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -381,7 +381,7 @@ static int asus_raw_event(struct hid_device *hdev,
return 0;
}
-static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size)
+static int asus_kbd_set_report(struct hid_device *hdev, const u8 *buf, size_t buf_size)
{
unsigned char *dmabuf;
int ret;
@@ -404,7 +404,7 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size
static int asus_kbd_init(struct hid_device *hdev)
{
- u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
+ const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x41, 0x53, 0x55, 0x53, 0x20, 0x54,
0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
int ret;
@@ -418,7 +418,7 @@ static int asus_kbd_init(struct hid_device *hdev)
static int asus_kbd_get_functions(struct hid_device *hdev,
unsigned char *kbd_func)
{
- u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
+ const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 };
u8 *readbuf;
int ret;
@@ -449,7 +449,7 @@ static int asus_kbd_get_functions(struct hid_device *hdev,
static int rog_nkey_led_init(struct hid_device *hdev)
{
- u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
+ const u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 0x53, 0x20,
0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
--
2.42.1
^ permalink raw reply related
* [PATCH 0/2] hid-asus: reset the backlight brightness level on resume
From: Luke D. Jones @ 2023-11-17 1:15 UTC (permalink / raw)
To: jikos; +Cc: benjamin.tissoires, linux-input, linux-kernel, benato.denis96
From: Denis Benato <benato.denis96@gmail.com>
I have noticed that in my Asus device RC71L the keyboard backlight is LEDs brightness of two RGB rings around two joysticks of this handheld device.
The firmware on this device (and other devices from the same manufacturer) restores a default brightness level (that is full brightness for my device and off for some others) after resuming from sleep; that means sysfs will report a wrong brightness level and requires human intervention to restore the desired brightness.
I have fixed aforementioned problems with this patch I am submitting.
This patch (composed of two distinct patches) compiles without warnings on both gcc and clang and also improves a function signature and constant-correctness of the kernel driver.
Denis Benato (2):
hid-asus: add const to read-only outgoing usb buffer
hid-asus: reset the backlight brightness level on resume
drivers/hid/hid-asus.c | 27 +++++++++++++++++++++++----
1 file changed, 23 insertions(+), 4 deletions(-)
--
2.42.1
^ permalink raw reply
* Re: [PATCH v1 1/1] treewide, spi: Get rid of SPI_MASTER_HALF_DUPLEX
From: Mark Brown @ 2023-11-16 20:22 UTC (permalink / raw)
To: Jonathan Cameron, Yang Yingliang, Greg Kroah-Hartman, linux-input,
linux-kernel, linux-mmc, netdev, linux-usb, linux-spi,
Andy Shevchenko
Cc: Dmitry Torokhov, Ulf Hansson, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni
In-Reply-To: <20231113111249.3982461-1-andriy.shevchenko@linux.intel.com>
On Mon, 13 Nov 2023 13:12:49 +0200, Andy Shevchenko wrote:
> The SPI_MASTER_HALF_DUPLEX is the legacy name of a definition
> for a half duplex flag. Since all others had been replaced with
> the respective SPI_CONTROLLER prefix get rid of the last one
> as well. There is no functional change intended.
>
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] treewide, spi: Get rid of SPI_MASTER_HALF_DUPLEX
commit: 3fc6350fc8470d42f5e700ecd1c3d90f9dd9fd2d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply
* Re: [PATCH] Input: xpad - add Lenovo Legion Go controllers
From: Hans de Goede @ 2023-11-16 18:20 UTC (permalink / raw)
To: Brenton Simpson, Dmitry Torokhov
Cc: Erica Taylor, Vicki Pfau, nate, linux-input, linux-kernel,
Ismael Ferreras Morezuelas, Cameron Gutman
In-Reply-To: <CAAL3-=88exVfuL1Y-kvPNbsU+d-UTfDLFViWVObFLtbC4xueeA@mail.gmail.com>
Hi Brenton,
On 11/16/23 18:45, Brenton Simpson wrote:
> When the controllers are both attached (or detached), they appear as
> 0x17ef, 0x6182. When only one is attached, they appear as
> 0x17ef, 0x6184.
>
> 84 (mixed attachment) is already recognized as a gamepad by Linux. This
> patch adds 82 (both attached/detached).
>
> These controllers have many more buttons than is typical. With this
> patch, here's what's functional when it presents as 82:
>
> Recognized:
>
> - X, Y, A, B
> - both analog sticks, including L3/R3
> - D-pad
> - menu and capture buttons
> - rumble
>
> Not yet recognized:
>
> - start, select
> - 4 rear paddle buttons (Y1, Y2, Y3, M3)
> - gyroscope
>
> (There are also non-functional buttons when reporting as 84 that are
> out-of-scope for this patch.)
>
> Signed-off-by: Brenton Simpson <appsforartists@google.com>
> ---
> drivers/input/joystick/xpad.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
> index f5c21565bb3cec..ecfcea8740a009 100644
> --- a/drivers/input/joystick/xpad.c
> +++ b/drivers/input/joystick/xpad.c
> @@ -127,6 +127,7 @@ static const struct xpad_device {
> u8 mapping;
> u8 xtype;
> } xpad_device[] = {
It looks like your workflow of copy-pasting this into your
email client has turned the tabs in the patch into a single space
character.
This and possibly other issues (line-wrapping, wrong end-of-line type)
is why using git send-email is the preferred way to submit kernel
patches.
Maybe try using Brenton Simpson <appsforartists+kernel@google.com>
for both the author and signed-off-by fields and then use
git send-email ?
Regards,
Hans
p.s.
Might be best to send the next attempt just to me, until you've
figured out a working email setup. And then once we have things
working, re-submit to the right people ?
> + { 0x17ef, 0x6182, "Lenovo Legion Go Controller (unified)", 0, XTYPE_XBOX360 },
> { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
> { 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 },
> { 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 },
> @@ -459,6 +460,7 @@ static const signed short xpad_btn_paddles[] = {
>
> static const struct usb_device_id xpad_table[] = {
> { USB_INTERFACE_INFO('X', 'B', 0) }, /* Xbox USB-IF not-approved class */
> + XPAD_XBOX360_VENDOR(0x17ef), /* Lenovo */
> XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 controller */
> XPAD_XBOX360_VENDOR(0x03eb), /* Wooting Keyboards (Legacy) */
> XPAD_XBOXONE_VENDOR(0x03f0), /* HP HyperX Xbox One controllers */
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox