* Re: [linux-5.15.y 2/3] HID: pass the buffer size to hid_report_raw_event
From: sashiko-bot @ 2026-06-04 9:39 UTC (permalink / raw)
To: Lee Jones; +Cc: dmitry.torokhov, linux-input
In-Reply-To: <20260604092659.3953067-2-lee@kernel.org>
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] The patch fails to resolve the short report rejection regression for most HID devices because `hid_input_report()` unconditionally sets `bufsize = size`.
- [High] Incorrect `bufsize` argument in `wacom_wac_queue_flush` defeats the mitigation for short reports.
- [Low] Format string mismatch for `size_t` variable `bsize` causes compiler warnings and potential build failures on 32-bit platforms.
--
commit 410a0d731bb14f8c3685faa86ca65503898cc6f0
Author: Benjamin Tissoires <bentiss@kernel.org>
HID: pass the buffer size to hid_report_raw_event
This commit passes the buffer size along with the data size to
hid_report_raw_event() to make a better decision on whether to reject the
buffer or safely memset it to 0 and pass it to the rest of the stack.
> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> index 4fb573ee31b2c..a8d4673c7b8e1 100644
> --- a/drivers/hid/hid-core.c
> +++ b/drivers/hid/hid-core.c
> @@ -1775,8 +1775,8 @@ int __hid_request(struct hid_device *hid, struct hid_report *report,
> }
> EXPORT_SYMBOL_GPL(__hid_request);
>
> -int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
> - int interrupt)
> +int hid_report_raw_event(struct hid_device *hid, int type, u8 *data,
> + size_t bufsize, u32 size, int interrupt)
> {
> struct hid_report_enum *report_enum = hid->report_enum + type;
> struct hid_report *report;
> @@ -1784,16 +1784,24 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
> int max_buffer_size = HID_MAX_BUFFER_SIZE;
> unsigned int a;
> u32 rsize, csize = size;
> + size_t bsize = bufsize;
> u8 *cdata = data;
> int ret = 0;
>
> report = hid_get_report(report_enum, data);
> if (!report)
> - goto out;
> + return 0;
> +
> + if (unlikely(bsize < csize)) {
> + hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n",
> + report->id, csize, bsize);
[Severity: Low]
Does this cause a compiler warning on 32-bit platforms? bsize is a size_t,
but is being printed with the %ld format specifier, which might trigger a
-Wformat warning since size_t is usually an unsigned int on those
architectures. Should this use %zu instead?
> + return -EINVAL;
> + }
>
> if (report_enum->numbered) {
> cdata++;
> csize--;
> + bsize--;
> }
>
> rsize = hid_compute_report_size(report);
> @@ -1806,9 +1814,15 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
> else if (rsize > max_buffer_size)
> rsize = max_buffer_size;
>
> + if (bsize < rsize) {
> + hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n",
> + report->id, rsize, bsize);
[Severity: Low]
This isn't a bug, but there's another instance here where bsize is printed
with %ld instead of %zu.
> + return -EINVAL;
> + }
> +
> if (csize < rsize) {
> dbg_hid("report %d is too short, (%d < %d)\n", report->id,
> - csize, rsize);
> + csize, rsize);
> memset(cdata + csize, 0, rsize - csize);
> }
[ ... ]
> @@ -1851,6 +1865,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, u32 size, int i
> struct hid_report_enum *report_enum;
> struct hid_driver *hdrv;
> struct hid_report *report;
> + size_t bufsize = size;
> int ret = 0;
>
> if (!hid)
> @@ -1889,7 +1904,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, u32 size, int i
> goto unlock;
> }
>
> - ret = hid_report_raw_event(hid, type, data, size, interrupt);
> + ret = hid_report_raw_event(hid, type, data, bufsize, size, interrupt);
[Severity: High]
Does this defeat the short report mitigation for most devices?
Since hid_input_report() is the primary entry point for HID transport
drivers and lacks a bufsize argument, it sets bufsize equal to size (the
payload length). When a short report is received, this guarantees that
bsize < rsize evaluates to true in hid_report_raw_event().
Will this incorrectly drop valid short reports for most HID devices by
triggering the -EINVAL rejection path?
>
> unlock:
> up(&hid->driver_input_lock);
[ ... ]
> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
> index c8a8daedff3d0..1b130ac45acad 100644
> --- a/drivers/hid/wacom_sys.c
> +++ b/drivers/hid/wacom_sys.c
> @@ -79,7 +79,7 @@ static void wacom_wac_queue_flush(struct hid_device *hdev,
> int err;
>
> size = kfifo_out(fifo, buf, sizeof(buf));
> - err = hid_report_raw_event(hdev, HID_INPUT_REPORT, buf, size, false);
> + err = hid_report_raw_event(hdev, HID_INPUT_REPORT, buf, size, size, false);
[Severity: High]
Should the bufsize argument here be sizeof(buf) instead of size?
Because bufsize is being passed as the short data length rather than the
true allocated buffer size, hid_report_raw_event() will evaluate
bsize < rsize as true and incorrectly reject valid short wacom reports
with -EINVAL.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260604092659.3953067-2-lee@kernel.org?part=1
^ permalink raw reply
* [linux-5.15.y 3/3] HID: core: Fix size_t specifier in hid_report_raw_event()
From: Lee Jones @ 2026-06-04 9:26 UTC (permalink / raw)
To: lee, Jiri Kosina, Benjamin Tissoires, Viresh Kumar, Johan Hovold,
Alex Elder, Greg Kroah-Hartman, linux-input, linux-kernel,
greybus-dev, linux-staging
Cc: stable, Nathan Chancellor, Miguel Ojeda, Linus Torvalds,
Sasha Levin
In-Reply-To: <20260604092659.3953067-1-lee@kernel.org>
From: Nathan Chancellor <nathan@kernel.org>
[ Upstream commit 4d3a2a466b8d68d852a1f3bbf11204b718428dc4 ]
When building for 32-bit platforms, for which 'size_t' is
'unsigned int', there are warnings around using the incorrect format
specifier to print bsize in hid_report_raw_event():
drivers/hid/hid-core.c:2054:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2053 | hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n",
| ~~~
| %zu
2054 | report->id, csize, bsize);
| ^~~~~
drivers/hid/hid-core.c:2076:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2075 | hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n",
| ~~~
| %zu
2076 | report->id, rsize, bsize);
| ^~~~~
Use the proper 'size_t' format specifier, '%zu', to clear up the
warnings.
Cc: stable@vger.kernel.org
Fixes: 2c85c61d1332 ("HID: pass the buffer size to hid_report_raw_event")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://lore.kernel.org/20260516020430.110135-1-ojeda@kernel.org/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 3ab135238832446399614e7a4bb796d620717806)
Signed-off-by: Lee Jones <lee@kernel.org>
(cherry picked from commit 0f77a993b5426cca1b046c9ab4b2f8355a4d45dc)
Signed-off-by: Lee Jones <lee@kernel.org>
---
drivers/hid/hid-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index a8d4673c7b8e..e106b59b55da 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1793,7 +1793,7 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data,
return 0;
if (unlikely(bsize < csize)) {
- hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n",
+ hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %zu)\n",
report->id, csize, bsize);
return -EINVAL;
}
@@ -1815,7 +1815,7 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data,
rsize = max_buffer_size;
if (bsize < rsize) {
- hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n",
+ hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %zu)\n",
report->id, rsize, bsize);
return -EINVAL;
}
--
2.54.0.1032.g2f8565e1d1-goog
^ permalink raw reply related
* [linux-5.15.y 2/3] HID: pass the buffer size to hid_report_raw_event
From: Lee Jones @ 2026-06-04 9:26 UTC (permalink / raw)
To: lee, Jiri Kosina, Benjamin Tissoires, Viresh Kumar, Johan Hovold,
Alex Elder, Greg Kroah-Hartman, linux-input, linux-kernel,
greybus-dev, linux-staging
Cc: stable, Benjamin Tissoires, Jiri Kosina, Sasha Levin
In-Reply-To: <20260604092659.3953067-1-lee@kernel.org>
From: Benjamin Tissoires <bentiss@kernel.org>
[ Upstream commit 2c85c61d1332e1e16f020d76951baf167dcb6f7a ]
commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing
bogus memset()") enforced the provided data to be at least the size of
the declared buffer in the report descriptor to prevent a buffer
overflow. However, we can try to be smarter by providing both the buffer
size and the data size, meaning that hid_report_raw_event() can make
better decision whether we should plaining reject the buffer (buffer
overflow attempt) or if we can safely memset it to 0 and pass it to the
rest of the stack.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 206342541fc8 ("HID: core: introduce hid_safe_input_report()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 509c2605065004fc4cd86ee50a9350d402785307)
[Lee: Backported to linux-6.12.y and beyond]
Signed-off-by: Lee Jones <lee@kernel.org>
---
drivers/hid/hid-core.c | 29 ++++++++++++++++++++++-------
drivers/hid/hid-gfrm.c | 4 ++--
drivers/hid/hid-logitech-hidpp.c | 2 +-
drivers/hid/hid-multitouch.c | 2 +-
drivers/hid/hid-primax.c | 2 +-
drivers/hid/hid-vivaldi.c | 2 +-
drivers/hid/wacom_sys.c | 6 +++---
drivers/staging/greybus/hid.c | 2 +-
include/linux/hid.h | 4 ++--
9 files changed, 34 insertions(+), 19 deletions(-)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 4fb573ee31b2..a8d4673c7b8e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1775,8 +1775,8 @@ int __hid_request(struct hid_device *hid, struct hid_report *report,
}
EXPORT_SYMBOL_GPL(__hid_request);
-int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
- int interrupt)
+int hid_report_raw_event(struct hid_device *hid, int type, u8 *data,
+ size_t bufsize, u32 size, int interrupt)
{
struct hid_report_enum *report_enum = hid->report_enum + type;
struct hid_report *report;
@@ -1784,16 +1784,24 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
int max_buffer_size = HID_MAX_BUFFER_SIZE;
unsigned int a;
u32 rsize, csize = size;
+ size_t bsize = bufsize;
u8 *cdata = data;
int ret = 0;
report = hid_get_report(report_enum, data);
if (!report)
- goto out;
+ return 0;
+
+ if (unlikely(bsize < csize)) {
+ hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n",
+ report->id, csize, bsize);
+ return -EINVAL;
+ }
if (report_enum->numbered) {
cdata++;
csize--;
+ bsize--;
}
rsize = hid_compute_report_size(report);
@@ -1806,9 +1814,15 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
else if (rsize > max_buffer_size)
rsize = max_buffer_size;
+ if (bsize < rsize) {
+ hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n",
+ report->id, rsize, bsize);
+ return -EINVAL;
+ }
+
if (csize < rsize) {
dbg_hid("report %d is too short, (%d < %d)\n", report->id,
- csize, rsize);
+ csize, rsize);
memset(cdata + csize, 0, rsize - csize);
}
@@ -1817,7 +1831,7 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
if (hid->claimed & HID_CLAIMED_HIDRAW) {
ret = hidraw_report_event(hid, data, size);
if (ret)
- goto out;
+ return ret;
}
if (hid->claimed != HID_CLAIMED_HIDRAW && report->maxfield) {
@@ -1830,7 +1844,7 @@ int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
if (hid->claimed & HID_CLAIMED_INPUT)
hidinput_report_event(hid, report);
-out:
+
return ret;
}
EXPORT_SYMBOL_GPL(hid_report_raw_event);
@@ -1851,6 +1865,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, u32 size, int i
struct hid_report_enum *report_enum;
struct hid_driver *hdrv;
struct hid_report *report;
+ size_t bufsize = size;
int ret = 0;
if (!hid)
@@ -1889,7 +1904,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, u32 size, int i
goto unlock;
}
- ret = hid_report_raw_event(hid, type, data, size, interrupt);
+ ret = hid_report_raw_event(hid, type, data, bufsize, size, interrupt);
unlock:
up(&hid->driver_input_lock);
diff --git a/drivers/hid/hid-gfrm.c b/drivers/hid/hid-gfrm.c
index 699186ff2349..d2a56bf92b41 100644
--- a/drivers/hid/hid-gfrm.c
+++ b/drivers/hid/hid-gfrm.c
@@ -66,7 +66,7 @@ static int gfrm_raw_event(struct hid_device *hdev, struct hid_report *report,
switch (data[1]) {
case GFRM100_SEARCH_KEY_DOWN:
ret = hid_report_raw_event(hdev, HID_INPUT_REPORT, search_key_dn,
- sizeof(search_key_dn), 1);
+ sizeof(search_key_dn), sizeof(search_key_dn), 1);
break;
case GFRM100_SEARCH_KEY_AUDIO_DATA:
@@ -74,7 +74,7 @@ static int gfrm_raw_event(struct hid_device *hdev, struct hid_report *report,
case GFRM100_SEARCH_KEY_UP:
ret = hid_report_raw_event(hdev, HID_INPUT_REPORT, search_key_up,
- sizeof(search_key_up), 1);
+ sizeof(search_key_up), sizeof(search_key_up), 1);
break;
default:
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 7ed851bf5bc8..812ed660c555 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -3440,7 +3440,7 @@ static int hidpp10_consumer_keys_raw_event(struct hidpp_device *hidpp,
memcpy(&consumer_report[1], &data[3], 4);
/* We are called from atomic context */
hid_report_raw_event(hidpp->hid_dev, HID_INPUT_REPORT,
- consumer_report, 5, 1);
+ consumer_report, sizeof(consumer_report), 5, 1);
return 1;
}
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 7a092a2a1bf0..df87d7ae94c4 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -479,7 +479,7 @@ static void mt_get_feature(struct hid_device *hdev, struct hid_report *report)
}
ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, buf,
- size, 0);
+ size, size, 0);
if (ret)
dev_warn(&hdev->dev, "failed to report feature\n");
}
diff --git a/drivers/hid/hid-primax.c b/drivers/hid/hid-primax.c
index 1e6413d07cae..16e2a811eda9 100644
--- a/drivers/hid/hid-primax.c
+++ b/drivers/hid/hid-primax.c
@@ -44,7 +44,7 @@ static int px_raw_event(struct hid_device *hid, struct hid_report *report,
data[0] |= (1 << (data[idx] - 0xE0));
data[idx] = 0;
}
- hid_report_raw_event(hid, HID_INPUT_REPORT, data, size, 0);
+ hid_report_raw_event(hid, HID_INPUT_REPORT, data, size, size, 0);
return 1;
default: /* unknown report */
diff --git a/drivers/hid/hid-vivaldi.c b/drivers/hid/hid-vivaldi.c
index d57ec1767037..fdfea1355ee7 100644
--- a/drivers/hid/hid-vivaldi.c
+++ b/drivers/hid/hid-vivaldi.c
@@ -126,7 +126,7 @@ static void vivaldi_feature_mapping(struct hid_device *hdev,
}
ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT, report_data,
- report_len, 0);
+ report_len, report_len, 0);
if (ret) {
dev_warn(&hdev->dev, "failed to report feature %d\n",
field->report->id);
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index c8a8daedff3d..1b130ac45aca 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -79,7 +79,7 @@ static void wacom_wac_queue_flush(struct hid_device *hdev,
int err;
size = kfifo_out(fifo, buf, sizeof(buf));
- err = hid_report_raw_event(hdev, HID_INPUT_REPORT, buf, size, false);
+ err = hid_report_raw_event(hdev, HID_INPUT_REPORT, buf, size, size, false);
if (err) {
hid_warn(hdev, "%s: unable to flush event due to error %d\n",
__func__, err);
@@ -324,7 +324,7 @@ static void wacom_feature_mapping(struct hid_device *hdev,
data, n, WAC_CMD_RETRIES);
if (ret == n && features->type == HID_GENERIC) {
ret = hid_report_raw_event(hdev,
- HID_FEATURE_REPORT, data, n, 0);
+ HID_FEATURE_REPORT, data, n, n, 0);
} else if (ret == 2 && features->type != HID_GENERIC) {
features->touch_max = data[1];
} else {
@@ -385,7 +385,7 @@ static void wacom_feature_mapping(struct hid_device *hdev,
data, n, WAC_CMD_RETRIES);
if (ret == n) {
ret = hid_report_raw_event(hdev, HID_FEATURE_REPORT,
- data, n, 0);
+ data, n, n, 0);
} else {
hid_warn(hdev, "%s: could not retrieve sensor offsets\n",
__func__);
diff --git a/drivers/staging/greybus/hid.c b/drivers/staging/greybus/hid.c
index adb91286803a..49b42c0ab078 100644
--- a/drivers/staging/greybus/hid.c
+++ b/drivers/staging/greybus/hid.c
@@ -201,7 +201,7 @@ static void gb_hid_init_report(struct gb_hid *ghid, struct hid_report *report)
* we just need to setup the input fields, so using
* hid_report_raw_event is safe.
*/
- hid_report_raw_event(ghid->hid, report->type, ghid->inbuf, size, 1);
+ hid_report_raw_event(ghid->hid, report->type, ghid->inbuf, ghid->bufsize, size, 1);
}
static void gb_hid_init_reports(struct gb_hid *ghid)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 3968fa039c26..c92c5e2ae24f 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -1206,8 +1206,8 @@ static inline u32 hid_report_len(struct hid_report *report)
return DIV_ROUND_UP(report->size, 8) + (report->id > 0);
}
-int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size,
- int interrupt);
+int hid_report_raw_event(struct hid_device *hid, int type, u8 *data,
+ size_t bufsize, u32 size, int interrupt);
/* HID quirks API */
unsigned long hid_lookup_quirk(const struct hid_device *hdev);
--
2.54.0.1032.g2f8565e1d1-goog
^ permalink raw reply related
* [linux-5.15.y 1/3] HID: core: Add printk_ratelimited variants to hid_warn() etc
From: Lee Jones @ 2026-06-04 9:26 UTC (permalink / raw)
To: lee, Jiri Kosina, Benjamin Tissoires, Viresh Kumar, Johan Hovold,
Alex Elder, Greg Kroah-Hartman, linux-input, linux-kernel,
greybus-dev, linux-staging
Cc: stable, Vicki Pfau, Jiri Kosina
From: Vicki Pfau <vi@endrift.com>
hid_warn_ratelimited() is needed. Add the others as part of the block.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
(cherry picked from commit 1d64624243af8329b4b219d8c39e28ea448f9929)
Signed-off-by: Lee Jones <lee@kernel.org>
(cherry picked from commit 3dc96d0b81eae69bf71e129e3f331c982c5c70fd)
Signed-off-by: Lee Jones <lee@kernel.org>
---
include/linux/hid.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 671403f208c9..3968fa039c26 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -1248,4 +1248,15 @@ do { \
#define hid_dbg_once(hid, fmt, ...) \
dev_dbg_once(&(hid)->dev, fmt, ##__VA_ARGS__)
+#define hid_err_ratelimited(hid, fmt, ...) \
+ dev_err_ratelimited(&(hid)->dev, fmt, ##__VA_ARGS__)
+#define hid_notice_ratelimited(hid, fmt, ...) \
+ dev_notice_ratelimited(&(hid)->dev, fmt, ##__VA_ARGS__)
+#define hid_warn_ratelimited(hid, fmt, ...) \
+ dev_warn_ratelimited(&(hid)->dev, fmt, ##__VA_ARGS__)
+#define hid_info_ratelimited(hid, fmt, ...) \
+ dev_info_ratelimited(&(hid)->dev, fmt, ##__VA_ARGS__)
+#define hid_dbg_ratelimited(hid, fmt, ...) \
+ dev_dbg_ratelimited(&(hid)->dev, fmt, ##__VA_ARGS__)
+
#endif
--
2.54.0.1032.g2f8565e1d1-goog
^ permalink raw reply related
* Re: [PATCH v2 4/4] Input: snvs_pwrkey - report press event in interrupt handler
From: sashiko-bot @ 2026-06-04 9:07 UTC (permalink / raw)
To: Joy Zou; +Cc: imx, Frank.Li, linux-input, dmitry.torokhov
In-Reply-To: <20260604-pwrkey-cleanup-v2-4-59fa0ddf0d7c@nxp.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Data race between hardirq and timer softirq leads to desynchronized key state
--
commit 9a729213fc1cfc21c866a352fad1a978bfa80359
Author: Joy Zou <joy.zou@nxp.com>
Input: snvs_pwrkey - report press event in interrupt handler
This commit modifies the snvs_pwrkey driver to directly report key press
events from the interrupt handler during system suspend. This bypasses the
debounce timer to prevent event loss during the no_irq resume phase.
> diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
> index 4a1d048984826..f212a6b26185d 100644
> --- a/drivers/input/keyboard/snvs_pwrkey.c
> +++ b/drivers/input/keyboard/snvs_pwrkey.c
[ ... ]
> @@ -92,6 +93,15 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
> input_sync(input);
> pm_relax(input->dev.parent);
> } else {
> + /*
> + * Report key press events directly in interrupt handler to prevent event
> + * loss during system suspend.
> + */
> + if (pdata->suspended) {
> + pdata->keystate = 1;
> + input_report_key(input, pdata->keycode, 1);
> + input_sync(input);
> + }
[Severity: High]
Does this introduce a data race with the timer callback
imx_imx_snvs_check_for_events()?
The new hardirq logic writes to pdata->keystate locklessly here, but
imx_imx_snvs_check_for_events() also reads and writes it locklessly in
softirq context.
Could this sequence occur:
1. The timer callback reads state = 0 (key released) and evaluates
(state ^ pdata->keystate) as true.
2. The timer sets pdata->keystate = 0.
3. Before the timer calls input_event(), a key press triggers the hardirq
on the same CPU (preemption) or another CPU.
4. The hardirq sees pdata->suspended == true, sets pdata->keystate = 1,
and reports a key press (1).
5. The timer resumes and reports the release (0) to the input core.
This would leave pdata->keystate as 1, while the input subsystem's last
reported state is 0. On the next physical key press, the timer would read
state = 1, evaluate 1 ^ 1 as 0, and ignore the event. This might cause the
power key to become logically stuck until physically released again.
> mod_timer(&pdata->check_timer,
> jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
> }
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260604-pwrkey-cleanup-v2-0-59fa0ddf0d7c@nxp.com?part=4
^ permalink raw reply
* Re: [PATCH v2 1/4] Input: snvs_pwrkey - make use of dev_err_probe()
From: sashiko-bot @ 2026-06-04 7:04 UTC (permalink / raw)
To: Joy Zou; +Cc: linux-input, imx, Frank.Li, dmitry.torokhov
In-Reply-To: <20260604-pwrkey-cleanup-v2-1-59fa0ddf0d7c@nxp.com>
Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
Pre-existing issues:
- [High] Incorrect pairing of pm_wakeup_event(dev, 0) and pm_relax(dev) fails to keep the system awake.
- [Medium] Missing cleanup for dev_pm_set_wake_irq() causes resource leak and -EEXIST on rebind.
--
commit c91200344c06e4226bdcadd16b77ac3688786f5d
Author: Joy Zou <joy.zou@nxp.com>
Input: snvs_pwrkey - make use of dev_err_probe()
This patch updates the imx_snvs_pwrkey_probe function to use dev_err_probe()
on its error paths. This provides more concise error logging and helps
identify issues more easily during probe.
> diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
> index 954055aaf6e29..748196fcce75b 100644
> --- a/drivers/input/keyboard/snvs_pwrkey.c
> +++ b/drivers/input/keyboard/snvs_pwrkey.c
[ ... ]
> @@ -209,16 +203,12 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
> error = devm_request_irq(&pdev->dev, pdata->irq,
> imx_snvs_pwrkey_interrupt,
> 0, pdev->name, pdev);
> - if (error) {
> - dev_err(&pdev->dev, "interrupt not available.\n");
> - return error;
> - }
> + if (error)
> + return dev_err_probe(&pdev->dev, error, "interrupt not available.\n");
>
> error = input_register_device(input);
> - if (error < 0) {
> - dev_err(&pdev->dev, "failed to register input device\n");
> - return error;
> - }
> + if (error < 0)
> + return dev_err_probe(&pdev->dev, error, "failed to register input device\n");
>
> device_init_wakeup(&pdev->dev, pdata->wakeup);
> error = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
[Severity: Medium]
This is a pre-existing issue, but since dev_pm_set_wake_irq() is called here
without a corresponding cleanup mechanism, does this cause a resource leak?
When the driver is unbound via sysfs, the allocated wake_irq structure is
leaked and the device remains marked with a wakeirq because there is no
.remove callback or devm action to call dev_pm_clear_wake_irq().
Will a subsequent rebind cause dev_pm_set_wake_irq() to fail with -EEXIST
because dev->power.wakeirq is still populated?
This is also a pre-existing issue, but I noticed something else regarding the
wake event handling.
drivers/input/keyboard/snvs_pwrkey.c:imx_snvs_pwrkey_interrupt() {
...
pm_wakeup_event(input->dev.parent, 0);
...
}
And later in the driver:
drivers/input/keyboard/snvs_pwrkey.c:imx_imx_snvs_check_for_events() {
...
pm_relax(pdata->input->dev.parent);
...
}
[Severity: High]
Does this incorrect pairing of pm_wakeup_event(dev, 0) and pm_relax(dev) fail
to keep the system awake?
Passing a 0 ms timeout to pm_wakeup_event() activates and immediately
deactivates the wakeup source. Because the wakeup source is already inactive,
the later call to pm_relax() acts as a no-op.
Does this mean the system is free to enter auto-sleep immediately after the
interrupt and before the timer executes, potentially delaying or dropping the
power key event delivery? Would it be better to use pm_stay_awake() here
instead?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260604-pwrkey-cleanup-v2-0-59fa0ddf0d7c@nxp.com?part=1
^ permalink raw reply
* [PATCH v2 4/4] Input: snvs_pwrkey - report press event in interrupt handler
From: Joy Zou @ 2026-06-04 6:56 UTC (permalink / raw)
To: Dmitry Torokhov, Frank Li, Peng Fan, Jacky Bai, Ye Li
Cc: imx, linux-input, linux-kernel, Joy Zou
In-Reply-To: <20260604-pwrkey-cleanup-v2-0-59fa0ddf0d7c@nxp.com>
The driver implements debounce protection using a timer-based mechanism:
when a key interrupt occurs, a timer is scheduled to verify the key state
after DEBOUNCE_TIME before reporting the event. This works well during
normal operation.
However, key press events can be lost during system resume on platforms
like i.MX8MQ-EVK because:
1. During the no_irq resume phase, PCIe driver restoration can take up to
200ms with IRQs disabled.
2. The power key interrupt remains pending during the no_irq phase.
3. If the key is released before IRQs are re-enabled, the timer eventually
runs but sees the key as released and skips reporting the event.
Report key press events directly in interrupt handler to prevent event
loss during system suspend. This is safe because:
1. Only one event is reported per suspend cycle.
2. Normal operation retains the existing timer-based debounce mechanism.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes for v2:
1. Add a boolean variable suspended and PM callback functions to replace
the use of the is_suspended field per AI review comments.
2. Move event report handle to else branch in suspended state, since the
pdata->minor_rev == 0 branch has no debounce detection per AI review
comments.
3. Modify the commit message.
---
drivers/input/keyboard/snvs_pwrkey.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 4a1d04898482669894e9978014b62e4e9774b4e4..f212a6b26185d13e1af62728e7b2add5010adc5a 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -39,6 +39,7 @@ struct pwrkey_drv_data {
int keycode;
int keystate; /* 1:pressed */
int wakeup;
+ bool suspended; /* Track suspend state */
struct timer_list check_timer;
struct input_dev *input;
u8 minor_rev;
@@ -92,6 +93,15 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void *dev_id)
input_sync(input);
pm_relax(input->dev.parent);
} else {
+ /*
+ * Report key press events directly in interrupt handler to prevent event
+ * loss during system suspend.
+ */
+ if (pdata->suspended) {
+ pdata->keystate = 1;
+ input_report_key(input, pdata->keycode, 1);
+ input_sync(input);
+ }
mod_timer(&pdata->check_timer,
jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
}
@@ -219,6 +229,30 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused imx_snvs_pwrkey_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+ pdata->suspended = true;
+
+ return 0;
+}
+
+static int __maybe_unused imx_snvs_pwrkey_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+
+ pdata->suspended = false;
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(imx_snvs_pwrkey_pm_ops,
+ imx_snvs_pwrkey_suspend,
+ imx_snvs_pwrkey_resume);
+
static const struct of_device_id imx_snvs_pwrkey_ids[] = {
{ .compatible = "fsl,sec-v4.0-pwrkey" },
{ /* sentinel */ }
@@ -229,6 +263,7 @@ static struct platform_driver imx_snvs_pwrkey_driver = {
.driver = {
.name = "snvs_pwrkey",
.of_match_table = imx_snvs_pwrkey_ids,
+ .pm = &imx_snvs_pwrkey_pm_ops,
},
.probe = imx_snvs_pwrkey_probe,
};
--
2.50.1
^ permalink raw reply related
* [PATCH v2 3/4] Input: snvs_pwrkey - use local device pointer to simple code
From: Joy Zou @ 2026-06-04 6:56 UTC (permalink / raw)
To: Dmitry Torokhov, Frank Li, Peng Fan, Jacky Bai, Ye Li
Cc: imx, linux-input, linux-kernel, Joy Zou
In-Reply-To: <20260604-pwrkey-cleanup-v2-0-59fa0ddf0d7c@nxp.com>
Use local struct device pointer to avoid reference the platform_device
pointer every time.
No functional change.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes for v2:
1. Use dev instead of &pdev->dev for devm_input_allocate_device(),
which was missed in patch v1 per AI review comments.
2. Modify commit message.
---
drivers/input/keyboard/snvs_pwrkey.c | 41 ++++++++++++++++++------------------
1 file changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index a291812e6d22ea963568cced5b889bad00658526..4a1d04898482669894e9978014b62e4e9774b4e4 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -112,6 +112,7 @@ static void imx_snvs_pwrkey_act(void *pdata)
static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct pwrkey_drv_data *pdata;
struct input_dev *input;
struct device_node *np;
@@ -122,26 +123,26 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
u32 vid;
/* Get SNVS register Page */
- np = pdev->dev.of_node;
+ np = dev->of_node;
if (!np)
- return dev_err_probe(&pdev->dev, -ENODEV, "Device tree node not found\n");
+ return dev_err_probe(dev, -ENODEV, "Device tree node not found\n");
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
pdata->snvs = syscon_regmap_lookup_by_phandle(np, "regmap");
if (IS_ERR(pdata->snvs))
- return dev_err_probe(&pdev->dev, PTR_ERR(pdata->snvs), "Can't get snvs syscon\n");
+ return dev_err_probe(dev, PTR_ERR(pdata->snvs), "Can't get snvs syscon\n");
if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) {
pdata->keycode = KEY_POWER;
- dev_warn(&pdev->dev, "KEY_POWER without setting in dts\n");
+ dev_warn(dev, "KEY_POWER without setting in dts\n");
}
- clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
+ clk = devm_clk_get_optional_enabled(dev, NULL);
if (IS_ERR(clk))
- return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+ return dev_err_probe(dev, PTR_ERR(clk),
"Failed to get snvs clock (%pe)\n", clk);
pdata->wakeup = of_property_read_bool(np, "wakeup-source");
@@ -162,7 +163,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
bpt = (val / 5) - 1;
break;
default:
- return dev_err_probe(&pdev->dev, -EINVAL,
+ return dev_err_probe(dev, -EINVAL,
"power-off-time-sec %d out of range\n", val);
}
@@ -180,9 +181,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
timer_setup(&pdata->check_timer, imx_imx_snvs_check_for_events, 0);
- input = devm_input_allocate_device(&pdev->dev);
+ input = devm_input_allocate_device(dev);
if (!input) {
- dev_err(&pdev->dev, "failed to allocate the input device\n");
+ dev_err(dev, "failed to allocate the input device\n");
return -ENOMEM;
}
@@ -193,27 +194,27 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
input_set_capability(input, EV_KEY, pdata->keycode);
/* input customer action to cancel release timer */
- error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata);
+ error = devm_add_action(dev, imx_snvs_pwrkey_act, pdata);
if (error)
- return dev_err_probe(&pdev->dev, error, "failed to register remove action\n");
+ return dev_err_probe(dev, error, "failed to register remove action\n");
pdata->input = input;
platform_set_drvdata(pdev, pdata);
- error = devm_request_irq(&pdev->dev, pdata->irq,
- imx_snvs_pwrkey_interrupt,
- 0, pdev->name, pdev);
+ error = devm_request_irq(dev, pdata->irq,
+ imx_snvs_pwrkey_interrupt,
+ 0, pdev->name, pdev);
if (error)
- return dev_err_probe(&pdev->dev, error, "interrupt not available.\n");
+ return dev_err_probe(dev, error, "interrupt not available.\n");
error = input_register_device(input);
if (error < 0)
- return dev_err_probe(&pdev->dev, error, "failed to register input device\n");
+ return dev_err_probe(dev, error, "failed to register input device\n");
- device_init_wakeup(&pdev->dev, pdata->wakeup);
- error = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
+ device_init_wakeup(dev, pdata->wakeup);
+ error = dev_pm_set_wake_irq(dev, pdata->irq);
if (error)
- dev_err(&pdev->dev, "irq wake enable failed.\n");
+ dev_err(dev, "irq wake enable failed.\n");
return 0;
}
--
2.50.1
^ permalink raw reply related
* [PATCH v2 2/4] Input: snvs_pwrkey - replace hardcoding -EINVAL with original error code
From: Joy Zou @ 2026-06-04 6:56 UTC (permalink / raw)
To: Dmitry Torokhov, Frank Li, Peng Fan, Jacky Bai, Ye Li
Cc: imx, linux-input, linux-kernel, Joy Zou
In-Reply-To: <20260604-pwrkey-cleanup-v2-0-59fa0ddf0d7c@nxp.com>
Hardcoding -EINVAL discards the actual error code, which breaks probe
deferral (-EPROBE_DEFER) and loses critical diagnostic information
needed for proper kernel error handling.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
drivers/input/keyboard/snvs_pwrkey.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 748196fcce75ba7192b1ee5fc516bdf4a9ae074d..a291812e6d22ea963568cced5b889bad00658526 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -148,7 +148,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
pdata->irq = platform_get_irq(pdev, 0);
if (pdata->irq < 0)
- return -EINVAL;
+ return pdata->irq;
error = of_property_read_u32(np, "power-off-time-sec", &val);
if (!error) {
--
2.50.1
^ permalink raw reply related
* [PATCH v2 1/4] Input: snvs_pwrkey - make use of dev_err_probe()
From: Joy Zou @ 2026-06-04 6:56 UTC (permalink / raw)
To: Dmitry Torokhov, Frank Li, Peng Fan, Jacky Bai, Ye Li
Cc: imx, linux-input, linux-kernel, Joy Zou
In-Reply-To: <20260604-pwrkey-cleanup-v2-0-59fa0ddf0d7c@nxp.com>
Add dev_err_probe() at return path of probe() to support users to
identify issues easier.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v2:
1. Drop dev_err_probe() change for platform_get_irq() per AI review comments.
2. Add Reviewed-by tag.
---
drivers/input/keyboard/snvs_pwrkey.c | 38 +++++++++++++-----------------------
1 file changed, 14 insertions(+), 24 deletions(-)
diff --git a/drivers/input/keyboard/snvs_pwrkey.c b/drivers/input/keyboard/snvs_pwrkey.c
index 954055aaf6e29527f22f8129fd47ca17722e2bc9..748196fcce75ba7192b1ee5fc516bdf4a9ae074d 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -124,17 +124,15 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
/* Get SNVS register Page */
np = pdev->dev.of_node;
if (!np)
- return -ENODEV;
+ return dev_err_probe(&pdev->dev, -ENODEV, "Device tree node not found\n");
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
pdata->snvs = syscon_regmap_lookup_by_phandle(np, "regmap");
- if (IS_ERR(pdata->snvs)) {
- dev_err(&pdev->dev, "Can't get snvs syscon\n");
- return PTR_ERR(pdata->snvs);
- }
+ if (IS_ERR(pdata->snvs))
+ return dev_err_probe(&pdev->dev, PTR_ERR(pdata->snvs), "Can't get snvs syscon\n");
if (of_property_read_u32(np, "linux,keycode", &pdata->keycode)) {
pdata->keycode = KEY_POWER;
@@ -142,10 +140,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
}
clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "Failed to get snvs clock (%pe)\n", clk);
- return PTR_ERR(clk);
- }
+ if (IS_ERR(clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+ "Failed to get snvs clock (%pe)\n", clk);
pdata->wakeup = of_property_read_bool(np, "wakeup-source");
@@ -165,9 +162,8 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
bpt = (val / 5) - 1;
break;
default:
- dev_err(&pdev->dev,
- "power-off-time-sec %d out of range\n", val);
- return -EINVAL;
+ return dev_err_probe(&pdev->dev, -EINVAL,
+ "power-off-time-sec %d out of range\n", val);
}
regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_BPT_MASK,
@@ -198,10 +194,8 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
/* input customer action to cancel release timer */
error = devm_add_action(&pdev->dev, imx_snvs_pwrkey_act, pdata);
- if (error) {
- dev_err(&pdev->dev, "failed to register remove action\n");
- return error;
- }
+ if (error)
+ return dev_err_probe(&pdev->dev, error, "failed to register remove action\n");
pdata->input = input;
platform_set_drvdata(pdev, pdata);
@@ -209,16 +203,12 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
error = devm_request_irq(&pdev->dev, pdata->irq,
imx_snvs_pwrkey_interrupt,
0, pdev->name, pdev);
- if (error) {
- dev_err(&pdev->dev, "interrupt not available.\n");
- return error;
- }
+ if (error)
+ return dev_err_probe(&pdev->dev, error, "interrupt not available.\n");
error = input_register_device(input);
- if (error < 0) {
- dev_err(&pdev->dev, "failed to register input device\n");
- return error;
- }
+ if (error < 0)
+ return dev_err_probe(&pdev->dev, error, "failed to register input device\n");
device_init_wakeup(&pdev->dev, pdata->wakeup);
error = dev_pm_set_wake_irq(&pdev->dev, pdata->irq);
--
2.50.1
^ permalink raw reply related
* [PATCH v2 0/4] snvs_pwrkey - code improvements and add report event
From: Joy Zou @ 2026-06-04 6:56 UTC (permalink / raw)
To: Dmitry Torokhov, Frank Li, Peng Fan, Jacky Bai, Ye Li
Cc: imx, linux-input, linux-kernel, Joy Zou
This patch series improves the snvs_pwrkey driver with better code quality
and add report press event.
The main improvements include:
1. Clean up the code by using local device pointers and dev_err_probe() for
better readability and easier debugging.
2. Fix potential event loss during system suspend by reporting key press events
directly in the interrupt handler.
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Frank Li <Frank.Li@nxp.com>
To: Peng Fan <peng.fan@nxp.com>
To: Jacky Bai <ping.bai@nxp.com>
To: Ye Li <ye.li@nxp.com>
Cc: imx@lists.linux.dev
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v2:
- Drop dev_err_probe() change for platform_get_irq() per AI review comments.
- Add new patch #2 replace hardcoding -EINVAL with original error code per
AI review comments.
- Use dev instead of &pdev->dev for devm_input_allocate_device(), which was
missed in patch v1 per AI review comments.
- Add a boolean variable suspended and PM callback functions to replace
the use of the is_suspended field per AI review comments.
- Move event report handle to else branch in suspended state, since the
pdata->minor_rev == 0 branch has no debounce detection per AI review
comments.
- Modify patch #3 and #4 commit message.
- Add Reviewed-by tag for patch #1.
- Link to v1: https://lore.kernel.org/r/20260326-pwrkey-cleanup-v1-0-d85d7c0bf275@nxp.com
---
Joy Zou (4):
Input: snvs_pwrkey - make use of dev_err_probe()
Input: snvs_pwrkey - replace hardcoding -EINVAL with original error code
Input: snvs_pwrkey - use local device pointer to simple code
Input: snvs_pwrkey - report press event in interrupt handler
drivers/input/keyboard/snvs_pwrkey.c | 102 ++++++++++++++++++++++-------------
1 file changed, 64 insertions(+), 38 deletions(-)
---
base-commit: f7af91adc230aa99e23330ecf85bc9badd9780ad
change-id: 20260326-pwrkey-cleanup-99d3de61ed6d
Best regards,
--
Joy Zou <joy.zou@nxp.com>
^ permalink raw reply
* Re: [PATCH v2] HID: wacom: stop hardware after post-start probe failures
From: sashiko-bot @ 2026-06-04 5:14 UTC (permalink / raw)
To: Myeonghun Pak; +Cc: dmitry.torokhov, linux-input
In-Reply-To: <20260604045710.25512-1-mhun512@gmail.com>
Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
Pre-existing issues:
- [High] Failing to cancel scheduled delayed works and timers on the probe error path leads to a Use-After-Free when the `wacom` structure is freed.
- [High] Nullifying input pointers in `wacom_register_inputs` before stopping the hardware leaves a race window where incoming interrupts can cause a NULL pointer dereference.
- [High] Hardware interrupts can arrive before `wacom->remote` is allocated, causing a NULL pointer dereference in the IRQ handlers.
--
commit 517a367ac93aa0d6c6470c3a21cdb477449345e3
Author: Myeonghun Pak <mhun512@gmail.com>
Subject: HID: wacom: stop hardware after post-start probe failures
This patch routes post-hid_hw_start() failures in wacom_parse_and_register()
through hid_hw_stop() before releasing driver resources. This ensures that the
HID hardware is properly stopped before the wacom resources are freed.
> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
> index 2220168bf1164..252771dcfd8f8 100644
> --- a/drivers/hid/wacom_sys.c
> +++ b/drivers/hid/wacom_sys.c
> @@ -2462,16 +2462,16 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
>
> error = wacom_register_inputs(wacom);
> if (error)
> - goto fail;
> + goto fail_hw_stop;
[Severity: High]
This is a pre-existing issue, but does this leave a small race window where
an interrupt could cause a NULL pointer dereference?
If wacom_register_inputs() fails, its error path sets the input pointers to
NULL:
fail:
wacom_wac->pad_input = NULL;
wacom_wac->touch_input = NULL;
wacom_wac->pen_input = NULL;
return error;
The code then jumps to fail_hw_stop. Since hid_hw_start() has already been
called, the hardware is active. Could an interrupt arrive before hid_hw_stop()
completes, triggering an IRQ handler like wacom_intuos_irq() which
dereferences wacom->pen_input without checking for NULL?
>
> if (wacom->wacom_wac.features.device_type & WACOM_DEVICETYPE_PAD) {
> error = wacom_initialize_leds(wacom);
> if (error)
> - goto fail;
> + goto fail_hw_stop;
>
> error = wacom_initialize_remotes(wacom);
> if (error)
> - goto fail;
> + goto fail_hw_stop;
[Severity: High]
This is a pre-existing issue, but I have a question about how this handles
interrupts arriving before initialization is complete.
Since hid_hw_start() is called prior to wacom_initialize_remotes():
error = hid_hw_start(hdev, connect_mask);
...
error = wacom_initialize_remotes(wacom);
Could an early hardware event or a malicious USB report arrive and trigger
wacom_remote_irq() or wacom_remote_status_irq()? Those handlers appear to
dereference wacom->remote to acquire a spinlock:
spin_lock_irqsave(&remote->remote_lock, flags);
If the interrupt arrives before wacom_initialize_remotes() has allocated
wacom->remote, would this lead to a NULL pointer dereference?
[ ... ]
> @@ -2501,7 +2501,7 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
>
> return 0;
>
> -fail_quirks:
> +fail_hw_stop:
> hid_hw_stop(hdev);
> fail:
> wacom_release_resources(wacom);
[Severity: High]
This isn't a bug introduced by this patch, but it seems there might be a
pre-existing issue with pending works on the error path.
If wacom_query_tablet_data() is called earlier:
wacom_query_tablet_data(struct wacom *wacom)
{
schedule_delayed_work(&wacom->init_work, msecs_to_jiffies(1000));
}
And then a subsequent step like hid_hw_open() fails, we jump to fail_hw_stop
which stops the hardware and releases resources:
fail_hw_stop:
hid_hw_stop(hdev);
fail:
wacom_release_resources(wacom);
return error;
Since the error is returned to wacom_probe() which can cause the devres core
to free the wacom structure, could the uncancelled wacom->init_work (or other
works/timers scheduled by interrupts) execute later and dereference the freed
wacom memory?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260604045710.25512-1-mhun512@gmail.com?part=1
^ permalink raw reply
* [PATCH v2] HID: wacom: stop hardware after post-start probe failures
From: Myeonghun Pak @ 2026-06-04 4:56 UTC (permalink / raw)
To: Ping Cheng, Jason Gerecke
Cc: Jiri Kosina, Benjamin Tissoires, linux-input, linux-kernel,
Myeonghun Pak, stable, Ijae Kim, Dmitry Torokhov
In-Reply-To: <20260524175552.1973-1-mhun512@gmail.com>
wacom_parse_and_register() starts HID hardware before registering inputs
and initializing pad LEDs/remotes. Those later steps can fail, but their
error paths currently release Wacom resources without stopping the HID
hardware.
Route post-hid_hw_start() failures through hid_hw_stop() before
releasing driver resources.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: c1d6708bf0d3 ("HID: wacom: Do not register input devices until after hid_hw_start")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
Changes in v2:
- Drop fail_quirks and use fail_hw_stop for every post-hid_hw_start()
failure path, as suggested by Dmitry.
drivers/hid/wacom_sys.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 0d1c6d90f..ee53186e0 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -2456,16 +2456,16 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
error = wacom_register_inputs(wacom);
if (error)
- goto fail;
+ goto fail_hw_stop;
if (wacom->wacom_wac.features.device_type & WACOM_DEVICETYPE_PAD) {
error = wacom_initialize_leds(wacom);
if (error)
- goto fail;
+ goto fail_hw_stop;
error = wacom_initialize_remotes(wacom);
if (error)
- goto fail;
+ goto fail_hw_stop;
}
if (!wireless) {
@@ -2479,14 +2479,14 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
cancel_delayed_work_sync(&wacom->init_work);
_wacom_query_tablet_data(wacom);
error = -ENODEV;
- goto fail_quirks;
+ goto fail_hw_stop;
}
if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR) {
error = hid_hw_open(hdev);
if (error) {
hid_err(hdev, "hw open failed\n");
- goto fail_quirks;
+ goto fail_hw_stop;
}
}
@@ -2495,7 +2495,7 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
return 0;
-fail_quirks:
+fail_hw_stop:
hid_hw_stop(hdev);
fail:
wacom_release_resources(wacom);
return error;
--
2.47.1
^ permalink raw reply related
* Re: [PATCH] HID: wacom: stop hardware after post-start probe failures
From: Myeonghun Pak @ 2026-06-04 4:43 UTC (permalink / raw)
To: Jiri Kosina
Cc: Dmitry Torokhov, Ping Cheng, Jason Gerecke, Benjamin Tissoires,
linux-input, linux-kernel, stable, Ijae Kim
In-Reply-To: <nr568s88-77o5-p5pn-5r1n-236371989rn0@xreary.bet>
Hi Jiri and Dmitry,
Thank you both for the review. I agree with Dmitry's suggestion to
remove 'fail_quirks' and use 'fail_hw_stop' throughout the probe path.
I will send out v2 with this change shortly.
Best regards,
Myeonghun Pak
2026년 6월 3일 (수) 오후 9:23, Jiri Kosina <jikos@kernel.org>님이 작성:
>
> On Wed, 27 May 2026, Dmitry Torokhov wrote:
>
> > > wacom_parse_and_register() starts HID hardware before registering inputs
> > > and initializing pad LEDs/remotes. Those later steps can fail, but their
> > > error paths currently release Wacom resources without stopping the HID
> > > hardware.
> > >
> > > Route post-hid_hw_start() failures through hid_hw_stop() before
> > > releasing driver resources.
> > >
> > > This issue was identified during our ongoing static-analysis research while
> > > reviewing kernel code.
> > >
> > > Fixes: c1d6708bf0d3 ("HID: wacom: Do not register input devices until after hid_hw_start")
> > > Cc: stable@vger.kernel.org
> > > Co-developed-by: Ijae Kim <ae878000@gmail.com>
> > > Signed-off-by: Ijae Kim <ae878000@gmail.com>
> > > Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
> > > ---
> > > drivers/hid/wacom_sys.c | 7 ++++---
> > > 1 file changed, 4 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
> > > index 0d1c6d90fe..c824d9c224 100644
> > > --- a/drivers/hid/wacom_sys.c
> > > +++ b/drivers/hid/wacom_sys.c
> > > @@ -2456,16 +2456,16 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
> > >
> > > error = wacom_register_inputs(wacom);
> > > if (error)
> > > - goto fail;
> > > + goto fail_hw_stop;
> > >
> > > if (wacom->wacom_wac.features.device_type & WACOM_DEVICETYPE_PAD) {
> > > error = wacom_initialize_leds(wacom);
> > > if (error)
> > > - goto fail;
> > > + goto fail_hw_stop;
> > >
> > > error = wacom_initialize_remotes(wacom);
> > > if (error)
> > > - goto fail;
> > > + goto fail_hw_stop;
> > > }
> > >
> > > if (!wireless) {
> > > @@ -2496,6 +2496,7 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
> > > return 0;
> > >
> > > fail_quirks:
> > > +fail_hw_stop:
> > > hid_hw_stop(hdev);
> > > fail:
> > > wacom_release_resources(wacom);
> >
> > I'd get rid of 'fail_quirks' and use 'fail_hw_stop' everywhere,
>
> Agreed. Myeonghun, will you send v2 please?
>
> Thanks,
>
> --
> Jiri Kosina
> SUSE Labs
>
^ permalink raw reply
* Re: [PATCH v2 2/3] HID: i2c-hid: Move common ACPI _DSM helper into core
From: 谢致邦 (XIE Zhibang) @ 2026-06-04 4:23 UTC (permalink / raw)
To: linux-input, hansg, dmitry.torokhov, bentiss
Cc: Yeking, dianders, error27, jikos, kenkinming2002, linux-kernel,
raoxu, superm1, treapking, 谢致邦 (XIE Zhibang),
Uwe Kleine-König (The Capable Hub)
In-Reply-To: <aiApE2WoVitHetQv@beelink>
Hi Hans and Benjamin,
Thank you for the constructive discussion.
A correction on the origin of this firmware quirk:
This is not a Loongson platform issue. Loongson 3A5000 and
3A6000 laptops using the EA Excelsior ODM design do not have
this problem. The affected machines — Lenovo KaiTian N60d and
Inspur CP300L3 — use a different ODM.
The ODM is likely Baolongda (Bitland), based on CQC certification
records and a design patent filing. Firmware analysis shows the
N60d is codenamed NL296A and the CP300L3 is NL296B, and there
may be NL296C as well. The ODM's NL296 project team likely
lacked ACPI experience, resulting in the broken PRP0001 +
"hid-over-i2c" + no "hid-descr-addr" but has _DSM combination.
I will use the name i2c-hid-acpi-prp0001, without DMI matching.
The new driver will first check whether "hid-descr-addr" is
present and silently return -ENODEV if so, falling back to _DSM
only when the property is missing.
I am testing the new driver and will send it out once verified.
The TPD0 node is identical on the N60d and CP300L3:
Device (TPD0)
{
Name (_HID, "PRP0001")
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x01)
{
Package (0x02)
{
"compatible",
"hid-over-i2c"
}
}
})
Name (_CRS, ResourceTemplate ()
{
I2cSerialBusV2 (0x002C, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2C1",
0x00, ResourceConsumer, , Exclusive,
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x0000007F,
}
})
Method (_DSM, 4, Serialized)
{
Switch (Arg0)
{
Case (ToUUID ("3cdff6f7-4267-4555-ad05-b30a3d8938de"))
{
Switch (Arg1)
{
Case (One)
{
Switch (Arg2)
{
Case (One)
{
Return (0x20)
}
}
}
}
}
}
}
}
Regards,
Zhibang
^ permalink raw reply
* [dtor-input:for-linus] BUILD SUCCESS ad0979fe053e9f2db82da82188256ef6eb41095a
From: kernel test robot @ 2026-06-04 3:37 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-input
tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git for-linus
branch HEAD: ad0979fe053e9f2db82da82188256ef6eb41095a Input: atkbd - add DMI quirk for Lenovo Yoga Air 14 (83QK)
elapsed time: 1665m
configs tested: 147
configs skipped: 3
The following configs have been built successfully.
More configs may be tested in the coming days.
tested configs:
alpha allnoconfig gcc-15.2.0
alpha allyesconfig gcc-15.2.0
arc allmodconfig gcc-15.2.0
arc allnoconfig gcc-15.2.0
arc allyesconfig gcc-15.2.0
arc randconfig-001-20260604 clang-17
arc randconfig-002-20260604 clang-17
arm allnoconfig clang-23
arm allnoconfig gcc-15.2.0
arm allyesconfig gcc-15.2.0
arm randconfig-001-20260604 clang-17
arm randconfig-002-20260604 clang-17
arm randconfig-003-20260604 clang-17
arm randconfig-004-20260604 clang-17
arm64 allmodconfig clang-19
arm64 allnoconfig gcc-15.2.0
csky allmodconfig gcc-15.2.0
csky allmodconfig gcc-16.1.0
csky allnoconfig gcc-15.2.0
hexagon allmodconfig clang-17
hexagon allmodconfig gcc-15.2.0
hexagon allnoconfig clang-23
hexagon allnoconfig gcc-15.2.0
hexagon randconfig-001 gcc-11.5.0
hexagon randconfig-001-20260604 gcc-11.5.0
hexagon randconfig-002 gcc-11.5.0
hexagon randconfig-002-20260604 gcc-11.5.0
i386 allnoconfig gcc-14
i386 allnoconfig gcc-15.2.0
i386 buildonly-randconfig-001-20260604 clang-20
i386 buildonly-randconfig-002-20260604 clang-20
i386 buildonly-randconfig-003-20260604 clang-20
i386 buildonly-randconfig-004-20260604 clang-20
i386 buildonly-randconfig-005-20260604 clang-20
i386 buildonly-randconfig-006-20260604 clang-20
i386 randconfig-011-20260604 gcc-14
i386 randconfig-012-20260604 gcc-14
i386 randconfig-013-20260604 gcc-14
i386 randconfig-014-20260604 gcc-14
i386 randconfig-015-20260604 gcc-14
i386 randconfig-016-20260604 gcc-14
i386 randconfig-017-20260604 gcc-14
loongarch allmodconfig clang-19
loongarch allnoconfig clang-23
loongarch allnoconfig gcc-15.2.0
loongarch defconfig clang-23
loongarch randconfig-001 gcc-11.5.0
loongarch randconfig-001-20260604 gcc-11.5.0
loongarch randconfig-002 gcc-11.5.0
loongarch randconfig-002-20260604 gcc-11.5.0
m68k allmodconfig gcc-15.2.0
m68k allmodconfig gcc-16.1.0
m68k allnoconfig gcc-15.2.0
m68k allyesconfig gcc-15.2.0
m68k defconfig clang-23
microblaze allnoconfig gcc-15.2.0
microblaze allyesconfig gcc-15.2.0
microblaze allyesconfig gcc-16.1.0
microblaze defconfig clang-23
mips allmodconfig gcc-16.1.0
mips allnoconfig gcc-15.2.0
mips allyesconfig gcc-15.2.0
mips allyesconfig gcc-16.1.0
nios2 allmodconfig gcc-11.5.0
nios2 allnoconfig clang-17
nios2 allnoconfig gcc-11.5.0
nios2 defconfig clang-23
nios2 randconfig-001 gcc-11.5.0
nios2 randconfig-001-20260604 gcc-11.5.0
nios2 randconfig-002 gcc-11.5.0
nios2 randconfig-002-20260604 gcc-11.5.0
openrisc allmodconfig gcc-15.2.0
openrisc allnoconfig clang-17
openrisc allnoconfig gcc-15.2.0
openrisc defconfig gcc-16.1.0
parisc allmodconfig gcc-16.1.0
parisc allnoconfig clang-17
parisc allnoconfig gcc-15.2.0
parisc allyesconfig clang-19
parisc allyesconfig gcc-15.2.0
parisc defconfig gcc-16.1.0
parisc64 defconfig clang-23
powerpc allmodconfig gcc-16.1.0
powerpc allnoconfig clang-17
powerpc allnoconfig gcc-15.2.0
riscv allmodconfig clang-23
riscv allnoconfig clang-17
riscv allnoconfig gcc-15.2.0
riscv allyesconfig clang-16
riscv defconfig gcc-16.1.0
riscv randconfig-001 clang-17
riscv randconfig-001-20260604 clang-17
riscv randconfig-002 clang-17
riscv randconfig-002-20260604 clang-17
s390 allmodconfig clang-18
s390 allmodconfig clang-19
s390 allnoconfig clang-17
s390 allnoconfig clang-23
s390 allyesconfig gcc-16.1.0
s390 defconfig gcc-16.1.0
s390 randconfig-001 clang-17
s390 randconfig-001-20260604 clang-17
s390 randconfig-002 clang-17
s390 randconfig-002-20260604 clang-17
sh allmodconfig gcc-15.2.0
sh allnoconfig clang-17
sh allnoconfig gcc-15.2.0
sh allyesconfig clang-19
sh allyesconfig gcc-15.2.0
sh defconfig gcc-14
sh randconfig-001 clang-17
sh randconfig-001-20260604 clang-17
sh randconfig-002 clang-17
sh randconfig-002-20260604 clang-17
sh urquell_defconfig gcc-16.1.0
sparc allnoconfig clang-17
sparc allnoconfig gcc-15.2.0
sparc defconfig gcc-16.1.0
sparc64 allmodconfig clang-23
sparc64 defconfig gcc-14
um allmodconfig clang-19
um allnoconfig clang-17
um allnoconfig clang-23
um allyesconfig gcc-14
um allyesconfig gcc-15.2.0
um defconfig gcc-14
um i386_defconfig gcc-14
um x86_64_defconfig gcc-14
x86_64 allnoconfig clang-17
x86_64 allnoconfig clang-20
x86_64 buildonly-randconfig-001-20260604 gcc-14
x86_64 buildonly-randconfig-002-20260604 gcc-14
x86_64 buildonly-randconfig-003-20260604 gcc-14
x86_64 buildonly-randconfig-004-20260604 gcc-14
x86_64 buildonly-randconfig-005-20260604 gcc-14
x86_64 buildonly-randconfig-006-20260604 gcc-14
x86_64 defconfig gcc-14
x86_64 kexec clang-22
x86_64 rhel-9.4 clang-22
x86_64 rhel-9.4-bpf gcc-14
x86_64 rhel-9.4-func clang-22
x86_64 rhel-9.4-kselftests clang-22
x86_64 rhel-9.4-kunit gcc-14
x86_64 rhel-9.4-ltp gcc-14
x86_64 rhel-9.4-rust clang-22
xtensa allnoconfig clang-17
xtensa allnoconfig gcc-15.2.0
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply
* Re: [PATCH v2 4/4] dt-bindings: input: remove obsolete matrix-keymap.txt
From: Rob Herring (Arm) @ 2026-06-03 22:26 UTC (permalink / raw)
To: Akash Sukhavasi
Cc: Conor Dooley, David S. Miller, Andrew Lunn, linux-tegra,
linux-input, Mauro Carvalho Chehab, Heiner Kallweit,
Thierry Reding, linux-media, Krzysztof Kozlowski, Jakub Kicinski,
Vladimir Oltean, linux-doc, linux-kernel, Eric Dumazet,
Dmitry Torokhov, Jonathan Hunter, Simon Horman, devicetree,
Paolo Abeni, Lee Jones, netdev, Shuah Khan, Russell King,
Jonathan Corbet
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-4-c8c19876ab64@gmail.com>
On Wed, 03 Jun 2026 15:42:21 -0500, Akash Sukhavasi wrote:
> matrix-keymap.txt has been a single-line redirect to
> matrix-keymap.yaml since commit 639d6eda3b80 ("dt-bindings: input:
> Convert matrix-keymap to json-schema"), which introduced the .yaml
> schema and reduced the .txt to a stub in the same change. The .yaml
> has the same filename in the same directory, making this redirect
> unnecessary for discoverability.
>
> Eight instances across six files still reference matrix-keymap.txt,
> forcing readers through an extra hop to reach the .yaml. The stub has
> not been touched since June 2020. Update all references across input
> and mfd binding documentation to point directly to matrix-keymap.yaml
> and remove the stub.
>
> Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
> ---
> v2:
> - Patch 4/4: corrected commit message (eight references in six files,
> not eight files), Sashiko review.
> https://sashiko.dev/#/patchset/20260529052246.4934-1-akash.sukhavasi@gmail.com?part=4
>
> v1: https://lore.kernel.org/all/20260529052246.4934-5-akash.sukhavasi@gmail.com/
> ---
> Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt | 2 +-
> Documentation/devicetree/bindings/input/clps711x-keypad.txt | 2 +-
> Documentation/devicetree/bindings/input/matrix-keymap.txt | 1 -
> Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt | 2 +-
> Documentation/devicetree/bindings/input/pxa27x-keypad.txt | 2 +-
> Documentation/devicetree/bindings/input/st-keyscan.txt | 2 +-
> Documentation/devicetree/bindings/mfd/tc3589x.txt | 6 +++---
> 7 files changed, 8 insertions(+), 9 deletions(-)
>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply
* Re: [PATCH v2 0/4] dt-bindings: remove redundant .txt redirect stubs
From: Rob Herring @ 2026-06-03 22:21 UTC (permalink / raw)
To: Akash Sukhavasi
Cc: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Krzysztof Kozlowski,
Conor Dooley, Mauro Carvalho Chehab, Vladimir Oltean,
Simon Horman, Jonathan Corbet, Shuah Khan, Dmitry Torokhov,
Thierry Reding, Jonathan Hunter, Lee Jones, netdev, devicetree,
linux-kernel, linux-media, linux-doc, linux-input, linux-tegra
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-0-c8c19876ab64@gmail.com>
On Wed, Jun 03, 2026 at 03:42:17PM -0500, Akash Sukhavasi wrote:
> Several .txt files under Documentation/devicetree/bindings/ contain
> only a redirect notice pointing to a .yaml schema with the same base
> filename in the same directory. These stubs were useful during the
> .txt to .yaml transition but are now redundant, since the .yaml is
> discoverable by name. Meanwhile, other documentation still references
> some of these stubs, forcing readers through an unnecessary extra hop
> to reach the actual schema.
>
> This series removes four such stubs and updates all remaining
> cross-references to point directly to the .yaml schemas.
>
> Other redirect stubs in the tree were evaluated and intentionally
> kept:
>
> - Stubs pointing to .yaml files with different names (e.g.,
> spi-bus.txt -> spi-controller.yaml) serve as breadcrumbs for
> the renamed schema.
>
> - Stubs pointing to multiple .yaml files (e.g., nvmem.txt ->
> nvmem.yaml and nvmem-consumer.yaml) convey that the content
> was split.
>
> - Stubs pointing to .yaml files in a different directory (e.g.,
> reset/st,stm32-rcc.txt -> clock/st,stm32-rcc.yaml) serve as
> cross-directory pointers.
>
> Two additional same-name, same-directory stubs (leds/common.txt,
> regulator/regulator.txt) have significantly more cross references
> and will be addressed in a follow-up series.
>
> v2:
> - Patch 4/4: corrected commit message (eight references in six files, not
> eight files), Sashiko review.
> https://sashiko.dev/#/patchset/20260529052246.4934-1-akash.sukhavasi@gmail.com?part=4
>
> v1: https://lore.kernel.org/all/20260529052246.4934-1-akash.sukhavasi@gmail.com/
>
> Patch 1 supersedes my earlier standalone submission:
> https://lore.kernel.org/all/20260523004223.3045-1-akash.sukhavasi@gmail.com/
>
> Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
> ---
> Akash Sukhavasi (4):
> dt-bindings: net: remove obsolete mdio.txt
> dt-bindings: media: remove obsolete rc.txt
> dt-bindings: net: dsa: remove obsolete dsa.txt
> dt-bindings: input: remove obsolete matrix-keymap.txt
This goes to 3 different subsystems, so it should be 3 different series.
No need to resend just for that.
Rob
^ permalink raw reply
* Re: [PATCH v2 3/4] dt-bindings: net: dsa: remove obsolete dsa.txt
From: Rob Herring (Arm) @ 2026-06-03 22:20 UTC (permalink / raw)
To: Akash Sukhavasi
Cc: Dmitry Torokhov, linux-media, Thierry Reding, linux-input,
Eric Dumazet, linux-tegra, Shuah Khan, David S. Miller,
Krzysztof Kozlowski, Conor Dooley, devicetree,
Mauro Carvalho Chehab, Heiner Kallweit, Andrew Lunn, Simon Horman,
Jakub Kicinski, netdev, linux-kernel, Jonathan Hunter, Lee Jones,
Russell King, Paolo Abeni, Vladimir Oltean, Jonathan Corbet,
linux-doc
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-3-c8c19876ab64@gmail.com>
On Wed, 03 Jun 2026 15:42:20 -0500, Akash Sukhavasi wrote:
> dsa.txt has been a redirect to dsa.yaml since commit bce58590d1bd
> ("dt-bindings: net: dsa: Add DSA yaml binding") introduced the .yaml
> schema. The .yaml has the same filename in the same directory, making
> this redirect unnecessary for discoverability.
>
> Two files still reference dsa.txt, forcing readers through an extra
> hop to reach the .yaml. The stub has not been touched since August
> 2020. Update references in lan9303.txt and
> Documentation/networking/dsa/dsa.rst to point directly to dsa.yaml
> and remove the stub.
>
> Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
> ---
> Documentation/devicetree/bindings/net/dsa/dsa.txt | 4 ----
> Documentation/devicetree/bindings/net/dsa/lan9303.txt | 2 +-
> Documentation/networking/dsa/dsa.rst | 2 +-
> 3 files changed, 2 insertions(+), 6 deletions(-)
>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply
* Re: [PATCH v2 2/4] dt-bindings: media: remove obsolete rc.txt
From: Rob Herring (Arm) @ 2026-06-03 22:20 UTC (permalink / raw)
To: Akash Sukhavasi
Cc: Jakub Kicinski, Jonathan Hunter, Paolo Abeni, linux-kernel,
linux-input, Heiner Kallweit, Eric Dumazet, devicetree,
Simon Horman, Mauro Carvalho Chehab, linux-media, linux-tegra,
David S. Miller, Jonathan Corbet, Shuah Khan, Conor Dooley,
Lee Jones, Andrew Lunn, Krzysztof Kozlowski, Russell King,
linux-doc, netdev, Vladimir Oltean, Dmitry Torokhov,
Thierry Reding
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-2-c8c19876ab64@gmail.com>
On Wed, 03 Jun 2026 15:42:19 -0500, Akash Sukhavasi wrote:
> rc.txt has been a single-line redirect to rc.yaml since
> commit 7c31b9d67342 ("media: dt-bindings: media: Add YAML schemas for
> the generic RC bindings"), which introduced the .yaml schema and
> reduced the .txt to a stub in the same change. The .yaml has the same
> filename in the same directory, making this redirect unnecessary
> for discoverability.
>
> One file still references rc.txt, forcing readers through an extra
> hop to reach the .yaml. The stub has not been touched since August
> 2019. Update the reference in hix5hd2-ir.txt to point directly to
> rc.yaml and remove the stub.
>
> Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
> ---
> Documentation/devicetree/bindings/media/hix5hd2-ir.txt | 2 +-
> Documentation/devicetree/bindings/media/rc.txt | 1 -
> 2 files changed, 1 insertion(+), 2 deletions(-)
>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply
* Re: [PATCH v2 1/4] dt-bindings: net: remove obsolete mdio.txt
From: Rob Herring (Arm) @ 2026-06-03 22:19 UTC (permalink / raw)
To: Akash Sukhavasi
Cc: Heiner Kallweit, David S. Miller, Vladimir Oltean, linux-media,
linux-tegra, Dmitry Torokhov, linux-doc, Conor Dooley,
Jonathan Corbet, Shuah Khan, linux-kernel, Mauro Carvalho Chehab,
devicetree, Simon Horman, Andrew Lunn, Paolo Abeni, Lee Jones,
Krzysztof Kozlowski, netdev, Eric Dumazet, linux-input,
Russell King, Thierry Reding, Jonathan Hunter, Jakub Kicinski
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-1-c8c19876ab64@gmail.com>
On Wed, 03 Jun 2026 15:42:18 -0500, Akash Sukhavasi wrote:
> mdio.txt has been a single-line redirect to mdio.yaml since
> commit 62d77ff7ecbf ("dt-bindings: net: Add a YAML schemas for the
> generic MDIO options"), which introduced the .yaml schema and reduced
> the .txt to a stub in the same change. The .yaml has the same filename
> in the same directory, making this redirect unnecessary for
> discoverability.
>
> No files in the tree reference mdio.txt and it has not been touched
> since June 2019. Remove the obsolete stub.
>
> Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
> ---
> Documentation/devicetree/bindings/net/mdio.txt | 1 -
> 1 file changed, 1 deletion(-)
>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply
* [PATCH v2 4/4] dt-bindings: input: remove obsolete matrix-keymap.txt
From: Akash Sukhavasi @ 2026-06-03 20:42 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Mauro Carvalho Chehab,
Vladimir Oltean, Simon Horman, Jonathan Corbet, Shuah Khan,
Dmitry Torokhov, Thierry Reding, Jonathan Hunter, Lee Jones
Cc: netdev, devicetree, linux-kernel, linux-media, linux-doc,
linux-input, linux-tegra, Akash Sukhavasi
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-0-c8c19876ab64@gmail.com>
matrix-keymap.txt has been a single-line redirect to
matrix-keymap.yaml since commit 639d6eda3b80 ("dt-bindings: input:
Convert matrix-keymap to json-schema"), which introduced the .yaml
schema and reduced the .txt to a stub in the same change. The .yaml
has the same filename in the same directory, making this redirect
unnecessary for discoverability.
Eight instances across six files still reference matrix-keymap.txt,
forcing readers through an extra hop to reach the .yaml. The stub has
not been touched since June 2020. Update all references across input
and mfd binding documentation to point directly to matrix-keymap.yaml
and remove the stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
---
v2:
- Patch 4/4: corrected commit message (eight references in six files,
not eight files), Sashiko review.
https://sashiko.dev/#/patchset/20260529052246.4934-1-akash.sukhavasi@gmail.com?part=4
v1: https://lore.kernel.org/all/20260529052246.4934-5-akash.sukhavasi@gmail.com/
---
Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt | 2 +-
Documentation/devicetree/bindings/input/clps711x-keypad.txt | 2 +-
Documentation/devicetree/bindings/input/matrix-keymap.txt | 1 -
Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt | 2 +-
Documentation/devicetree/bindings/input/pxa27x-keypad.txt | 2 +-
Documentation/devicetree/bindings/input/st-keyscan.txt | 2 +-
Documentation/devicetree/bindings/mfd/tc3589x.txt | 6 +++---
7 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
index 262deab73588..33514eba0c9c 100644
--- a/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
+++ b/Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt
@@ -59,7 +59,7 @@ Board Specific Properties:
subsystem (optional).
- linux,keymap: The keymap for keys as described in the binding document
- devicetree/bindings/input/matrix-keymap.txt.
+ devicetree/bindings/input/matrix-keymap.yaml.
Example:
#include "dt-bindings/input/input.h"
diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt
index 3eed8819d05d..5f4514c0cd5f 100644
--- a/Documentation/devicetree/bindings/input/clps711x-keypad.txt
+++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt
@@ -5,7 +5,7 @@ Required Properties:
- row-gpios: List of GPIOs used as row lines.
- poll-interval: Poll interval time in milliseconds.
- linux,keymap: The definition can be found at
- bindings/input/matrix-keymap.txt.
+ bindings/input/matrix-keymap.yaml.
Optional Properties:
- autorepeat: Enable autorepeat feature.
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.txt b/Documentation/devicetree/bindings/input/matrix-keymap.txt
deleted file mode 100644
index 79f6d01aecaa..000000000000
--- a/Documentation/devicetree/bindings/input/matrix-keymap.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to matrix-keymap.yaml
diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
index 1faa7292e21f..460b64d332cd 100644
--- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
+++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
@@ -12,7 +12,7 @@ Required properties:
- nvidia,kbc-col-pins: The KBC pins which are configured as column. This is an
array of pin numbers which is used as column.
- linux,keymap: The keymap for keys as described in the binding document
- devicetree/bindings/input/matrix-keymap.txt.
+ devicetree/bindings/input/matrix-keymap.yaml.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
diff --git a/Documentation/devicetree/bindings/input/pxa27x-keypad.txt b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
index f8674f7e5ea5..a727d66eece4 100644
--- a/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
+++ b/Documentation/devicetree/bindings/input/pxa27x-keypad.txt
@@ -10,7 +10,7 @@ Required Properties
interval for matrix key. The value is in binary number of 2ms
Optional Properties For Matrix Keyes
-Please refer to matrix-keymap.txt
+Please refer to matrix-keymap.yaml
Optional Properties for Direct Keyes
- marvell,direct-key-count : How many direct keyes are used.
diff --git a/Documentation/devicetree/bindings/input/st-keyscan.txt b/Documentation/devicetree/bindings/input/st-keyscan.txt
index 51eb428e5c85..fd88f40faebf 100644
--- a/Documentation/devicetree/bindings/input/st-keyscan.txt
+++ b/Documentation/devicetree/bindings/input/st-keyscan.txt
@@ -17,7 +17,7 @@ Required properties:
See ../pinctrl/pinctrl-bindings.txt for details.
- linux,keymap: The keymap for keys as described in the binding document
- devicetree/bindings/input/matrix-keymap.txt.
+ devicetree/bindings/input/matrix-keymap.yaml.
- keypad,num-rows: Number of row lines connected to the keypad controller.
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 4f22b2b07dc5..a6d356e90f42 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -48,11 +48,11 @@ Optional nodes:
- compatible : must be "toshiba,tc3589x-keypad"
- debounce-delay-ms : debounce interval in milliseconds
- keypad,num-rows : number of rows in the matrix, see
- bindings/input/matrix-keymap.txt
+ bindings/input/matrix-keymap.yaml
- keypad,num-columns : number of columns in the matrix, see
- bindings/input/matrix-keymap.txt
+ bindings/input/matrix-keymap.yaml
- linux,keymap: the definition can be found in
- bindings/input/matrix-keymap.txt
+ bindings/input/matrix-keymap.yaml
- linux,no-autorepeat: do no enable autorepeat feature.
- wakeup-source: use any event on keypad as wakeup event.
(Legacy property supported: "linux,wakeup")
--
2.54.0
^ permalink raw reply related
* [PATCH v2 3/4] dt-bindings: net: dsa: remove obsolete dsa.txt
From: Akash Sukhavasi @ 2026-06-03 20:42 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Mauro Carvalho Chehab,
Vladimir Oltean, Simon Horman, Jonathan Corbet, Shuah Khan,
Dmitry Torokhov, Thierry Reding, Jonathan Hunter, Lee Jones
Cc: netdev, devicetree, linux-kernel, linux-media, linux-doc,
linux-input, linux-tegra, Akash Sukhavasi
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-0-c8c19876ab64@gmail.com>
dsa.txt has been a redirect to dsa.yaml since commit bce58590d1bd
("dt-bindings: net: dsa: Add DSA yaml binding") introduced the .yaml
schema. The .yaml has the same filename in the same directory, making
this redirect unnecessary for discoverability.
Two files still reference dsa.txt, forcing readers through an extra
hop to reach the .yaml. The stub has not been touched since August
2020. Update references in lan9303.txt and
Documentation/networking/dsa/dsa.rst to point directly to dsa.yaml
and remove the stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
---
Documentation/devicetree/bindings/net/dsa/dsa.txt | 4 ----
Documentation/devicetree/bindings/net/dsa/lan9303.txt | 2 +-
Documentation/networking/dsa/dsa.rst | 2 +-
3 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
deleted file mode 100644
index dab208b5c7c7..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Distributed Switch Architecture Device Tree Bindings
-----------------------------------------------------
-
-See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 46a732087f5c..0337c2ccfa9a 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -16,7 +16,7 @@ Optional properties:
Subnodes:
The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt. The CPU port of this switch is always port 0.
+described in dsa/dsa.yaml. The CPU port of this switch is always port 0.
Note: always use 'reg = <0/1/2>;' for the three DSA ports, even if the device is
configured to use 1/2/3 instead. This hardware configuration will be
diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst
index fd3c254ced1d..42a99f5dfa2e 100644
--- a/Documentation/networking/dsa/dsa.rst
+++ b/Documentation/networking/dsa/dsa.rst
@@ -509,7 +509,7 @@ Device Tree
-----------
DSA features a standardized binding which is documented in
-``Documentation/devicetree/bindings/net/dsa/dsa.txt``. PHY/MDIO library helper
+``Documentation/devicetree/bindings/net/dsa/dsa.yaml``. PHY/MDIO library helper
functions such as ``of_get_phy_mode()``, ``of_phy_connect()`` are also used to query
per-port PHY specific details: interface connection, MDIO bus location, etc.
--
2.54.0
^ permalink raw reply related
* [PATCH v2 2/4] dt-bindings: media: remove obsolete rc.txt
From: Akash Sukhavasi @ 2026-06-03 20:42 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Mauro Carvalho Chehab,
Vladimir Oltean, Simon Horman, Jonathan Corbet, Shuah Khan,
Dmitry Torokhov, Thierry Reding, Jonathan Hunter, Lee Jones
Cc: netdev, devicetree, linux-kernel, linux-media, linux-doc,
linux-input, linux-tegra, Akash Sukhavasi
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-0-c8c19876ab64@gmail.com>
rc.txt has been a single-line redirect to rc.yaml since
commit 7c31b9d67342 ("media: dt-bindings: media: Add YAML schemas for
the generic RC bindings"), which introduced the .yaml schema and
reduced the .txt to a stub in the same change. The .yaml has the same
filename in the same directory, making this redirect unnecessary
for discoverability.
One file still references rc.txt, forcing readers through an extra
hop to reach the .yaml. The stub has not been touched since August
2019. Update the reference in hix5hd2-ir.txt to point directly to
rc.yaml and remove the stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
---
Documentation/devicetree/bindings/media/hix5hd2-ir.txt | 2 +-
Documentation/devicetree/bindings/media/rc.txt | 1 -
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
index ca4cf774662e..f777c2707e65 100644
--- a/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
+++ b/Documentation/devicetree/bindings/media/hix5hd2-ir.txt
@@ -11,7 +11,7 @@ Required properties:
- clocks: clock phandle and specifier pair.
Optional properties:
- - linux,rc-map-name: see rc.txt file in the same directory.
+ - linux,rc-map-name: see rc.yaml file in the same directory.
- hisilicon,power-syscon: DEPRECATED. Don't use this in new dts files.
Provide correct clocks instead.
diff --git a/Documentation/devicetree/bindings/media/rc.txt b/Documentation/devicetree/bindings/media/rc.txt
deleted file mode 100644
index be629f7fa77e..000000000000
--- a/Documentation/devicetree/bindings/media/rc.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to rc.yaml.
--
2.54.0
^ permalink raw reply related
* [PATCH v2 1/4] dt-bindings: net: remove obsolete mdio.txt
From: Akash Sukhavasi @ 2026-06-03 20:42 UTC (permalink / raw)
To: Andrew Lunn, Heiner Kallweit, Russell King, David S. Miller,
Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Mauro Carvalho Chehab,
Vladimir Oltean, Simon Horman, Jonathan Corbet, Shuah Khan,
Dmitry Torokhov, Thierry Reding, Jonathan Hunter, Lee Jones
Cc: netdev, devicetree, linux-kernel, linux-media, linux-doc,
linux-input, linux-tegra, Akash Sukhavasi
In-Reply-To: <20260603-b4-remove-redirect-stubs-v2-0-c8c19876ab64@gmail.com>
mdio.txt has been a single-line redirect to mdio.yaml since
commit 62d77ff7ecbf ("dt-bindings: net: Add a YAML schemas for the
generic MDIO options"), which introduced the .yaml schema and reduced
the .txt to a stub in the same change. The .yaml has the same filename
in the same directory, making this redirect unnecessary for
discoverability.
No files in the tree reference mdio.txt and it has not been touched
since June 2019. Remove the obsolete stub.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
---
Documentation/devicetree/bindings/net/mdio.txt | 1 -
1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt
deleted file mode 100644
index cf8a0105488e..000000000000
--- a/Documentation/devicetree/bindings/net/mdio.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has moved to mdio.yaml.
--
2.54.0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox