Re: Logitech M705 thumb button

[Octoploid <cryptooctoploid@gmail.com>]

On Fri, Apr 2, 2010 at 12:28 PM, Octoploid <cryptooctoploid@gmail.com> wrote:
> On Fri, Apr 2, 2010 at 12:05 PM, Jiri Kosina <jkosina@suse.cz> wrote:
>> On Wed, 31 Mar 2010, Octoploid wrote:
>>
>>> >> (The »unifying USB reciever« has three sub-devices. The first one is
>>> >> for keyboards, the second for mouses and the third is not used:
>>> >> usb 3-1: new full speed USB device using ohci_hcd and address 2
>>> >> input: Logitech USB Receiver as
>>> >> /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
>>> >> generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard
>>> >> [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
>>> >> input: Logitech USB Receiver as
>>> >> /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3
>>> >> generic-usb 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11
>>> >> Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
>>> >> generic-usb 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11
>>> >> Device [Logitech USB Receiver] on usb-0000:00:12.0-1/input2)
>>> >>
>>> >> The rdesc output for the mouse and the third device follows:
>>> >
>>> > Thanks for providing the output.
>>> >
>>> > The device defines 16 buttons in its report descriptor. How much does it
>>> > actually physically have?
>>>
>>> 8 if I count correctly (left,middle,right,scrollwheel left,scrollwheel right,
>>> forward, backward and the hidden (the non working) thumb button).
>>> Here is a photo of the mouse (the hidden button is located under the
>>> white underscore below the back and forward buttons):
>>> http://www.techfresh.net/wp-content/uploads/2010/03/logitech_m705.jpg
>>>
>>> > Is the other (non-used) interface also silent when you press the
>>> > non-working button? (I can see that it is claimed by HID as well).
>>>
>>> Yes.
>>>
>>> > Could you please apply the patch below and check whether there is still no
>>> > event present when you press the button?
>>> >
>>>
>>> Yes, unfortunately there are still no events even with the patch applied.
>>> (I've tested both interfaces)
>>
>> Could you please verify that there is indeed no USB event being triggered
>> by the button press at all, with usbmon [1]?
>
> I already verified this, but forgot to mention it in my last mail.
> There are indeed no USB events being triggered when I run
> "cat /sys/kernel/debug/usb/usbmon/ou".
>
>> If it is the case, I am afraid the only option would be inspecting what
>> initialization sequence does the driver for Another OS perform, so that it
>> makes the button work.

OK, I have downloaded a trial version of a usb-monitor and
recorded the following initialization sequence.
Let me know it this helps.

http://pastebin.org/131184
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html