From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Azhar Shaikh <azhar.shaikh@intel.com>
Cc: jgg@ziepe.ca, javierm@redhat.com, peterhuewe@gmx.de,
linux-security-module@vger.kernel.org,
linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] tpm: Fix the driver cleanup code
Date: Fri, 22 Dec 2017 20:41:44 +0200 [thread overview]
Message-ID: <20171222184143.aqkg7vjbkjarod2z@linux.intel.com> (raw)
In-Reply-To: <1513898019-164487-1-git-send-email-azhar.shaikh@intel.com>
On Thu, Dec 21, 2017 at 03:13:39PM -0800, Azhar Shaikh wrote:
> Commit 3c1701339284353c41 ("tpm: Keep CLKRUN enabled throughout
> the duration of transmit_cmd()") added code which accessed
> chip->ops, even after it was set to NULL in tpm_del_char_device(),
> called from tpm_chip_unregister() in error / driver exit paths.
> So fix this code.
>
> Fixes: 3c1701339284353c41 ("tpm: Keep CLKRUN enabled throughout
> the duration of transmit_cmd()")
>
> Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
> ---
> Changes in v2:
> - Remove TPM_CHIP_FLAG_DO_NOT_CLEAR_OPS flag, instead call
> tpm_tis_clkrun_enable() directly in tpm_tis_remove()
> - Add comment to tpm_tis_clkrun_enable()
>
> drivers/char/tpm/tpm_tis.c | 6 ------
> drivers/char/tpm/tpm_tis_core.c | 29 +++++++++++++++++------------
> 2 files changed, 17 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index d29add49b033..c847fc69a2fc 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -275,9 +275,6 @@ static void tpm_tis_pnp_remove(struct pnp_dev *dev)
>
> tpm_chip_unregister(chip);
> tpm_tis_remove(chip);
> - if (is_bsw())
> - iounmap(priv->ilb_base_addr);
> -
> }
>
> static struct pnp_driver tis_pnp_driver = {
> @@ -329,9 +326,6 @@ static int tpm_tis_plat_remove(struct platform_device *pdev)
> tpm_chip_unregister(chip);
> tpm_tis_remove(chip);
>
> - if (is_bsw())
> - iounmap(priv->ilb_base_addr);
> -
> return 0;
> }
>
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index c2227983ed88..519e4a78c8f8 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -37,6 +37,8 @@
> */
> #define TPM_POLL_SLEEP 1 /* msec */
>
> +static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value);
> +
> static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask,
> bool check_cancel, bool *canceled)
> {
> @@ -716,8 +718,7 @@ void tpm_tis_remove(struct tpm_chip *chip)
> u32 interrupt;
> int rc;
>
> - if (chip->ops->clk_enable != NULL)
> - chip->ops->clk_enable(chip, true);
> + tpm_tis_clkrun_enable(chip, true);
>
> rc = tpm_tis_read32(priv, reg, &interrupt);
> if (rc < 0)
> @@ -725,8 +726,10 @@ void tpm_tis_remove(struct tpm_chip *chip)
>
> tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt);
>
> - if (chip->ops->clk_enable != NULL)
> - chip->ops->clk_enable(chip, false);
> + tpm_tis_clkrun_enable(chip, false);
> +
> + if (priv->ilb_base_addr)
> + iounmap(priv->ilb_base_addr);
> }
> EXPORT_SYMBOL_GPL(tpm_tis_remove);
>
> @@ -736,6 +739,9 @@ void tpm_tis_remove(struct tpm_chip *chip)
> * @chip: TPM chip to use
> * @value: 1 - Disable CLKRUN protocol, so that clocks are free running
> * 0 - Enable CLKRUN protocol
> + *
> + * Call this function directly in tpm_tis_remove() in error or driver removal
> + * path, since the chip->ops is set to NULL in tpm_chip_unregister().
> */
> static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
> {
> @@ -922,21 +928,20 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
> }
>
> rc = tpm_chip_register(chip);
> - if (rc && is_bsw())
> - iounmap(priv->ilb_base_addr);
> + if (rc)
> + goto out_err;
>
> if (chip->ops->clk_enable != NULL)
> chip->ops->clk_enable(chip, false);
>
> - return rc;
> -out_err:
> - tpm_tis_remove(chip);
> - if (is_bsw())
> - iounmap(priv->ilb_base_addr);
> + return 0;
>
> - if (chip->ops->clk_enable != NULL)
> +out_err:
> + if ((chip->ops != NULL) && (chip->ops->clk_enable != NULL))
> chip->ops->clk_enable(chip, false);
>
> + tpm_tis_remove(chip);
> +
> return rc;
> }
> EXPORT_SYMBOL_GPL(tpm_tis_core_init);
> --
> 1.9.1
>
Since the original commit is not in the mainline yet, you should rather
send an updated version of that commit.
/Jarkko
next prev parent reply other threads:[~2017-12-22 18:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-21 23:13 [PATCH v2] tpm: Fix the driver cleanup code Azhar Shaikh
2017-12-22 2:49 ` Jason Gunthorpe
2017-12-22 18:41 ` Jarkko Sakkinen [this message]
2017-12-22 19:14 ` Shaikh, Azhar
2017-12-22 19:27 ` Shaikh, Azhar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171222184143.aqkg7vjbkjarod2z@linux.intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=azhar.shaikh@intel.com \
--cc=javierm@redhat.com \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=peterhuewe@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox