From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga04.intel.com ([192.55.52.120]:50714 "EHLO mga04.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752096AbeCESGD (ORCPT ); Mon, 5 Mar 2018 13:06:03 -0500 Date: Mon, 5 Mar 2018 20:05:58 +0200 From: Jarkko Sakkinen To: Tomas Winkler Cc: Jason Gunthorpe , Alexander Usyskin , linux-integrity@vger.kernel.org, linux-security-module@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v7] tpm: cmd_ready command can be issued only after granting locality Message-ID: <20180305180558.GA6220@linux.intel.com> References: <20180305113449.8876-1-tomas.winkler@intel.com> <20180305175128.GB5791@linux.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20180305175128.GB5791@linux.intel.com> Sender: linux-integrity-owner@vger.kernel.org List-ID: On Mon, Mar 05, 2018 at 07:51:28PM +0200, Jarkko Sakkinen wrote: > On Mon, Mar 05, 2018 at 01:34:49PM +0200, Tomas Winkler wrote: > > The correct sequence is to first request locality and only after > > that perform cmd_ready handshake, otherwise the hardware will drop > > the subsequent message as from the device point of view the cmd_ready > > handshake wasn't performed. Symmetrically locality has to be relinquished > > only after going idle handshake has completed, this requires that > > go_idle has to poll for the completion and as well locality > > relinquish has to poll for completion so it is not overridden > > in back to back commands flow. > > > > Two wrapper functions are added (request_locality relinquish_locality) > > to simplify the error handling. > > > > The issue is only visible on devices that support multiple localities. > > > > Fixes: 877c57d0d0ca ("tpm_crb: request and relinquish locality 0") > > Signed-off-by: Tomas Winkler > > Tested-by: Jarkko Sakkinen > Reviewed-by: Jarkko Sakkinen This commit has been applied. /Jarkko