From: Jerry Snitselaar <jsnitsel@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
Peter Huewe <peterhuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
linux-integrity@vger.kernel.org
Subject: [PATCH] tpm: Update mailing list contact information in sysfs-class-tpm
Date: Fri, 25 Oct 2019 12:36:28 -0700 [thread overview]
Message-ID: <20191025193628.31004-1-jsnitsel@redhat.com> (raw)
All of the entries in Documentation/ABI/stable/sysfs-class-tpm
point to the old tpmdd-devel mailing list. This patch
updates the entries to point to linux-intergrity.
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
---
Documentation/ABI/stable/sysfs-class-tpm | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
index c6bd02bafafd..e0116d42e4a0 100644
--- a/Documentation/ABI/stable/sysfs-class-tpm
+++ b/Documentation/ABI/stable/sysfs-class-tpm
@@ -1,7 +1,7 @@
What: /sys/class/tpm/tpmX/device/
Date: April 2005
KernelVersion: 2.6.12
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The device/ directory under a specific TPM instance exposes
the properties of that TPM chip
@@ -9,7 +9,7 @@ Description: The device/ directory under a specific TPM instance exposes
What: /sys/class/tpm/tpmX/device/active
Date: April 2006
KernelVersion: 2.6.17
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "active" property prints a '1' if the TPM chip is accepting
commands. An inactive TPM chip still contains all the state of
an active chip (Storage Root Key, NVRAM, etc), and can be
@@ -21,7 +21,7 @@ Description: The "active" property prints a '1' if the TPM chip is accepting
What: /sys/class/tpm/tpmX/device/cancel
Date: June 2005
KernelVersion: 2.6.13
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "cancel" property allows you to cancel the currently
pending TPM command. Writing any value to cancel will call the
TPM vendor specific cancel operation.
@@ -29,7 +29,7 @@ Description: The "cancel" property allows you to cancel the currently
What: /sys/class/tpm/tpmX/device/caps
Date: April 2005
KernelVersion: 2.6.12
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "caps" property contains TPM manufacturer and version info.
Example output:
@@ -46,7 +46,7 @@ Description: The "caps" property contains TPM manufacturer and version info.
What: /sys/class/tpm/tpmX/device/durations
Date: March 2011
KernelVersion: 3.1
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "durations" property shows the 3 vendor-specific values
used to wait for a short, medium and long TPM command. All
TPM commands are categorized as short, medium or long in
@@ -69,7 +69,7 @@ Description: The "durations" property shows the 3 vendor-specific values
What: /sys/class/tpm/tpmX/device/enabled
Date: April 2006
KernelVersion: 2.6.17
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "enabled" property prints a '1' if the TPM chip is enabled,
meaning that it should be visible to the OS. This property
may be visible but produce a '0' after some operation that
@@ -78,7 +78,7 @@ Description: The "enabled" property prints a '1' if the TPM chip is enabled,
What: /sys/class/tpm/tpmX/device/owned
Date: April 2006
KernelVersion: 2.6.17
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "owned" property produces a '1' if the TPM_TakeOwnership
ordinal has been executed successfully in the chip. A '0'
indicates that ownership hasn't been taken.
@@ -86,7 +86,7 @@ Description: The "owned" property produces a '1' if the TPM_TakeOwnership
What: /sys/class/tpm/tpmX/device/pcrs
Date: April 2005
KernelVersion: 2.6.12
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "pcrs" property will dump the current value of all Platform
Configuration Registers in the TPM. Note that since these
values may be constantly changing, the output is only valid
@@ -109,7 +109,7 @@ Description: The "pcrs" property will dump the current value of all Platform
What: /sys/class/tpm/tpmX/device/pubek
Date: April 2005
KernelVersion: 2.6.12
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "pubek" property will return the TPM's public endorsement
key if possible. If the TPM has had ownership established and
is version 1.2, the pubek will not be available without the
@@ -161,7 +161,7 @@ Description: The "pubek" property will return the TPM's public endorsement
What: /sys/class/tpm/tpmX/device/temp_deactivated
Date: April 2006
KernelVersion: 2.6.17
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "temp_deactivated" property returns a '1' if the chip has
been temporarily deactivated, usually until the next power
cycle. Whether a warm boot (reboot) will clear a TPM chip
@@ -170,7 +170,7 @@ Description: The "temp_deactivated" property returns a '1' if the chip has
What: /sys/class/tpm/tpmX/device/timeouts
Date: March 2011
KernelVersion: 3.1
-Contact: tpmdd-devel@lists.sf.net
+Contact: linux-integrity@vger.kernel.org
Description: The "timeouts" property shows the 4 vendor-specific values
for the TPM's interface spec timeouts. The use of these
timeouts is defined by the TPM interface spec that the chip
--
2.23.0
next reply other threads:[~2019-10-25 19:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-25 19:36 Jerry Snitselaar [this message]
2019-10-28 20:54 ` [PATCH] tpm: Update mailing list contact information in sysfs-class-tpm Jarkko Sakkinen
2019-11-28 1:09 ` Jerry Snitselaar
2020-01-13 14:23 ` Jerry Snitselaar
2020-01-17 9:27 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191025193628.31004-1-jsnitsel@redhat.com \
--to=jsnitsel@redhat.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).