From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Peter Huewe <peterhuewe@gmx.de>,
linux-spi@vger.kernel.org, Wolfram Sang <wsa@kernel.org>,
Jason Gunthorpe <jgg@ziepe.ca>, Mark Brown <broonie@kernel.org>,
linux-i2c@vger.kernel.org, kernel@pengutronix.de,
linux-integrity@vger.kernel.org
Subject: Re: [PATCH 13/13] tpm: st33zp24: Make st33zp24_remove() return void
Date: Tue, 12 Oct 2021 19:40:52 +0200 [thread overview]
Message-ID: <20211012174052.iekzt22ojilca5lc@pengutronix.de> (raw)
In-Reply-To: <4c6974280020118735644679f8498fe86748e648.camel@kernel.org>
[-- Attachment #1: Type: text/plain, Size: 4249 bytes --]
On Tue, Oct 12, 2021 at 07:47:22PM +0300, Jarkko Sakkinen wrote:
> On Mon, 2021-10-11 at 15:27 +0200, Uwe Kleine-König wrote:
> > Up to now st33zp24_remove() returns zero unconditionally. Make it return
> > void instead which makes it easier to see in the callers that there is
> > no error to handle.
>
> So, void is not a return value.
Hmm, would you be more happy with "Make it return no value"? I think
this is less understandable than "Make it return void". Do you have a
constructive suggestion how to formulate.
> > Also the return value of i2c and spi remove callbacks is ignored anyway.
> ~~~ ~~~
> I2C SPI
I don't agree. "I2C" is fine if you mean the protocol. For the framework
names I consider the small letters better, as it matches the directory
name below drivers/ and also matches the function name prefix and what
is usually used for short log prefixes. Ditto for spi.
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > ---
> > drivers/char/tpm/st33zp24/i2c.c | 5 +----
> > drivers/char/tpm/st33zp24/spi.c | 5 +----
> > drivers/char/tpm/st33zp24/st33zp24.c | 3 +--
> > drivers/char/tpm/st33zp24/st33zp24.h | 2 +-
> > 4 files changed, 4 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/char/tpm/st33zp24/i2c.c b/drivers/char/tpm/st33zp24/i2c.c
> > index 7c617edff4ca..3170d59d660c 100644
> > --- a/drivers/char/tpm/st33zp24/i2c.c
> > +++ b/drivers/char/tpm/st33zp24/i2c.c
> > @@ -267,11 +267,8 @@ static int st33zp24_i2c_probe(struct i2c_client *client,
> > static int st33zp24_i2c_remove(struct i2c_client *client)
> > {
> > struct tpm_chip *chip = i2c_get_clientdata(client);
> > - int ret;
> >
> > - ret = st33zp24_remove(chip);
> > - if (ret)
> > - return ret;
> > + st33zp24_remove(chip);
> >
> > return 0;
> > }
> > diff --git a/drivers/char/tpm/st33zp24/spi.c b/drivers/char/tpm/st33zp24/spi.c
> > index a75dafd39445..ccd9e42b8eab 100644
> > --- a/drivers/char/tpm/st33zp24/spi.c
> > +++ b/drivers/char/tpm/st33zp24/spi.c
> > @@ -384,11 +384,8 @@ static int st33zp24_spi_probe(struct spi_device *dev)
> > static int st33zp24_spi_remove(struct spi_device *dev)
> > {
> > struct tpm_chip *chip = spi_get_drvdata(dev);
> > - int ret;
> >
> > - ret = st33zp24_remove(chip);
> > - if (ret)
> > - return ret;
> > + st33zp24_remove(chip);
> >
> > return 0;
> > }
> > diff --git a/drivers/char/tpm/st33zp24/st33zp24.c b/drivers/char/tpm/st33zp24/st33zp24.c
> > index 4ec10ab5e576..2b63654c38d6 100644
> > --- a/drivers/char/tpm/st33zp24/st33zp24.c
> > +++ b/drivers/char/tpm/st33zp24/st33zp24.c
> > @@ -588,10 +588,9 @@ EXPORT_SYMBOL(st33zp24_probe);
> > * @param: tpm_data, the tpm phy.
> > * @return: 0 in case of success.
> > */
> > -int st33zp24_remove(struct tpm_chip *chip)
> > +void st33zp24_remove(struct tpm_chip *chip)
> > {
> > tpm_chip_unregister(chip);
> > - return 0;
> > }
> > EXPORT_SYMBOL(st33zp24_remove);
> >
> > diff --git a/drivers/char/tpm/st33zp24/st33zp24.h b/drivers/char/tpm/st33zp24/st33zp24.h
> > index 6747be1e2502..b387a476c555 100644
> > --- a/drivers/char/tpm/st33zp24/st33zp24.h
> > +++ b/drivers/char/tpm/st33zp24/st33zp24.h
> > @@ -34,5 +34,5 @@ int st33zp24_pm_resume(struct device *dev);
> >
> > int st33zp24_probe(void *phy_id, const struct st33zp24_phy_ops *ops,
> > struct device *dev, int irq, int io_lpcpd);
> > -int st33zp24_remove(struct tpm_chip *chip);
> > +void st33zp24_remove(struct tpm_chip *chip);
> > #endif /* __LOCAL_ST33ZP24_H__ */
>
> Even though this does not improve things at run-time, this does
> help to understand what the code does,
That is for focus for now. As written in the cover letter the long term
goal is to make struct spi_driver::remove return void, too.
> so in that sense I do
> think that this a sane change to make.
Thanks
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2021-10-12 17:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20211011132754.2479853-1-u.kleine-koenig@pengutronix.de>
2021-10-11 13:27 ` [PATCH 13/13] tpm: st33zp24: Make st33zp24_remove() return void Uwe Kleine-König
2021-10-12 16:47 ` Jarkko Sakkinen
2021-10-12 17:40 ` Uwe Kleine-König [this message]
2021-10-12 17:46 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211012174052.iekzt22ojilca5lc@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=broonie@kernel.org \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=kernel@pengutronix.de \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox