linux-integrity.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko@kernel.org>
To: LinoSanfilippo@gmx.de
Cc: peterhuewe@gmx.de, jgg@ziepe.ca, stefanb@linux.vnet.ibm.com,
	linux@mniewoehner.de, linux-integrity@vger.kernel.org,
	linux-kernel@vger.kernel.org, l.sanfilippo@kunbus.com,
	lukas@wunner.de, p.rosenberger@kunbus.com
Subject: Re: [PATCH v5 06/10] tpm, tpm_tis: Only handle supported interrupts in wait_for_tpm_stat()
Date: Wed, 15 Jun 2022 21:21:34 +0300	[thread overview]
Message-ID: <YqojLqfoy2NXTTGV@iki.fi> (raw)
In-Reply-To: <20220610110846.8307-7-LinoSanfilippo@gmx.de>

On Fri, Jun 10, 2022 at 01:08:42PM +0200, LinoSanfilippo@gmx.de wrote:
> From: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> 
> According to the TPM Interface Specification (TIS) interrupts for
> "stsValid" and "commandReady" might not be supported.
> 
> Take this into account and only wait for interrupts which are actually in
> use in wait_for_tpm_stat(). After that process all the remaining status
> changes by polling the status register.
> 
> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
> ---
>  drivers/char/tpm/tpm_tis_core.c | 46 ++++++++++++++++++++++++---------
>  1 file changed, 34 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 2f03fefa1706..028bec44362d 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -53,41 +53,63 @@ static int wait_for_tpm_stat(struct tpm_chip *chip, u8 mask,
>  	long rc;
>  	u8 status;
>  	bool canceled = false;
> +	u8 active_irqs = 0;

Something like sts_mask would be a better name. Calling it
'active_irqs' is a bit confusing.

> +	int ret = 0;
>  
>  	/* check current status */
>  	status = chip->ops->status(chip);
>  	if ((status & mask) == mask)
>  		return 0;
>  
> -	stop = jiffies + timeout;
> +	/* check what status changes can be handled by irqs */
> +	if (priv->irqs_in_use & TPM_INTF_STS_VALID_INT)
> +		active_irqs |= TPM_STS_VALID;
>  
> -	if (chip->flags & TPM_CHIP_FLAG_IRQ) {
> +	if (priv->irqs_in_use & TPM_INTF_DATA_AVAIL_INT)
> +		active_irqs |= TPM_STS_DATA_AVAIL;
> +
> +	if (priv->irqs_in_use & TPM_INTF_CMD_READY_INT)
> +		active_irqs |= TPM_STS_COMMAND_READY;
> +
> +	active_irqs &= mask;
> +
> +	stop = jiffies + timeout;
> +	/* process status changes with irq support */
> +	if (active_irqs) {
> +		ret = -ETIME;
>  again:
>  		timeout = stop - jiffies;
>  		if ((long)timeout <= 0)
>  			return -ETIME;
>  		rc = wait_event_interruptible_timeout(*queue,
> -			wait_for_tpm_stat_cond(chip, mask, check_cancel,
> +			wait_for_tpm_stat_cond(chip, active_irqs, check_cancel,
>  					       &canceled),
>  			timeout);
>  		if (rc > 0) {
>  			if (canceled)
>  				return -ECANCELED;
> -			return 0;
> +			ret = 0;
>  		}
>  		if (rc == -ERESTARTSYS && freezing(current)) {
>  			clear_thread_flag(TIF_SIGPENDING);
>  			goto again;
>  		}
> -	} else {
> -		do {
> -			usleep_range(priv->timeout_min,
> -				     priv->timeout_max);
> -			status = chip->ops->status(chip);
> -			if ((status & mask) == mask)
> -				return 0;
> -		} while (time_before(jiffies, stop));
>  	}
> +
> +	if (ret)
> +		return ret;
> +
> +	mask &= ~active_irqs;
> +	if (!mask) /* all done */
> +		return 0;
> +	/* process status changes without irq support */
> +	do {
> +		status = chip->ops->status(chip);
> +		if ((status & mask) == mask)
> +			return 0;
> +		usleep_range(priv->timeout_min,
> +			     priv->timeout_max);
> +	} while (time_before(jiffies, stop));
>  	return -ETIME;
>  }
>  
> -- 
> 2.36.1
> 

BR, Jarkko

  reply	other threads:[~2022-06-15 18:23 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-10 11:08 [PATCH v5 00/10] TPM IRQ fixes LinoSanfilippo
2022-06-10 11:08 ` [PATCH v5 01/10] tpm, tpm_tis: Avoid cache incoherency in test for interrupts LinoSanfilippo
2022-06-15 14:32   ` Jarkko Sakkinen
2022-06-15 22:06     ` Lino Sanfilippo
2022-06-10 11:08 ` [PATCH v5 02/10] tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register LinoSanfilippo
2022-06-15 14:33   ` Jarkko Sakkinen
2022-06-10 11:08 ` [PATCH v5 03/10] tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed LinoSanfilippo
2022-06-15 18:11   ` Jarkko Sakkinen
2022-06-10 11:08 ` [PATCH v5 04/10] tpm, tmp_tis: Claim locality before writing interrupt registers LinoSanfilippo
2022-06-15 18:13   ` Jarkko Sakkinen
2022-06-10 11:08 ` [PATCH v5 05/10] tpm, tpm_tis: Store result of interrupt capability query LinoSanfilippo
2022-06-15 18:18   ` Jarkko Sakkinen
2022-06-15 22:07     ` Lino Sanfilippo
2022-06-10 11:08 ` [PATCH v5 06/10] tpm, tpm_tis: Only handle supported interrupts in wait_for_tpm_stat() LinoSanfilippo
2022-06-15 18:21   ` Jarkko Sakkinen [this message]
2022-06-15 22:08     ` Lino Sanfilippo
2022-06-10 11:08 ` [PATCH v5 07/10] tmp, tmp_tis: Implement usage counter for locality LinoSanfilippo
2022-06-15 18:23   ` Jarkko Sakkinen
2022-06-15 22:22     ` Lino Sanfilippo
2022-06-10 11:08 ` [PATCH v5 08/10] tpm, tpm_tis: Request threaded interrupt handler LinoSanfilippo
2022-06-15 18:24   ` Jarkko Sakkinen
2022-06-10 11:08 ` [PATCH v5 09/10] tpm, tpm_tis: Claim locality in " LinoSanfilippo
2022-06-15 18:25   ` Jarkko Sakkinen
2022-06-10 11:08 ` [PATCH v5 10/10] tpm, tpm_tis: Enable interrupt test LinoSanfilippo
2022-06-15 18:26   ` Jarkko Sakkinen
2022-06-15 21:54     ` Michael Niewöhner
2022-06-15 23:30       ` Lino Sanfilippo
2022-06-16 13:03         ` Michael Niewöhner
2022-06-16 13:13           ` Lino Sanfilippo
2022-06-16 13:04     ` Michael Niewöhner
2022-06-26  5:19       ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YqojLqfoy2NXTTGV@iki.fi \
    --to=jarkko@kernel.org \
    --cc=LinoSanfilippo@gmx.de \
    --cc=jgg@ziepe.ca \
    --cc=l.sanfilippo@kunbus.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@mniewoehner.de \
    --cc=lukas@wunner.de \
    --cc=p.rosenberger@kunbus.com \
    --cc=peterhuewe@gmx.de \
    --cc=stefanb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).