From: Jarkko Sakkinen <jarkko@kernel.org>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-kernel@vger.kernel.org, linux-rt-devel@lists.linux.dev,
Thomas Gleixner <tglx@kernel.org>,
Peter Huewe <peterhuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
linux-integrity@vger.kernel.org
Subject: Re: [PATCH 09/21] char: tpm: cr50: Remove IRQF_ONESHOT
Date: Sun, 25 Jan 2026 18:50:00 +0200 [thread overview]
Message-ID: <aXZJuFXFvvfsW-Qb@kernel.org> (raw)
In-Reply-To: <20260123113708.416727-10-bigeasy@linutronix.de>
On Fri, Jan 23, 2026 at 12:36:55PM +0100, Sebastian Andrzej Siewior wrote:
> Passing IRQF_ONESHOT ensures that the interrupt source is masked until
> the secondary (threaded) handler is done. If only a primary handler is
> used then the flag makes no sense because the interrupt can not fire
> (again) while its handler is running.
> The flag also disallows force-threading of the primary handler and the
> irq-core will warn about this.
>
> Remove IRQF_ONESHOT from irqflags.
>
> Cc: Peter Huewe <peterhuewe@gmx.de>
> Cc: Jarkko Sakkinen <jarkko@kernel.org>
> Cc: Jason Gunthorpe <jgg@ziepe.ca>
> Cc: linux-integrity@vger.kernel.org
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
> drivers/char/tpm/tpm_tis_i2c_cr50.c | 3 +--
> drivers/char/tpm/tpm_tis_spi_cr50.c | 2 +-
> 2 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> index fc6891a0b6936..b48cacacc0664 100644
> --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> @@ -749,8 +749,7 @@ static int tpm_cr50_i2c_probe(struct i2c_client *client)
>
> if (client->irq > 0) {
> rc = devm_request_irq(dev, client->irq, tpm_cr50_i2c_int_handler,
> - IRQF_TRIGGER_FALLING | IRQF_ONESHOT |
> - IRQF_NO_AUTOEN,
> + IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN,
> dev->driver->name, chip);
> if (rc < 0) {
> dev_err(dev, "Failed to probe IRQ %d\n", client->irq);
> diff --git a/drivers/char/tpm/tpm_tis_spi_cr50.c b/drivers/char/tpm/tpm_tis_spi_cr50.c
> index f4937280e9406..32920b4cecfb4 100644
> --- a/drivers/char/tpm/tpm_tis_spi_cr50.c
> +++ b/drivers/char/tpm/tpm_tis_spi_cr50.c
> @@ -287,7 +287,7 @@ int cr50_spi_probe(struct spi_device *spi)
> if (spi->irq > 0) {
> ret = devm_request_irq(&spi->dev, spi->irq,
> cr50_spi_irq_handler,
> - IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + IRQF_TRIGGER_RISING,
> "cr50_spi", cr50_phy);
> if (ret < 0) {
> if (ret == -EPROBE_DEFER)
> --
> 2.51.0
>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Shoud I pick this? I did apply it to my master branch (not next).
BR, Jarkko
next prev parent reply other threads:[~2026-01-25 16:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260123113708.416727-1-bigeasy@linutronix.de>
2026-01-23 11:36 ` [PATCH 09/21] char: tpm: cr50: Remove IRQF_ONESHOT Sebastian Andrzej Siewior
2026-01-25 16:50 ` Jarkko Sakkinen [this message]
2026-01-27 15:45 ` Sebastian Andrzej Siewior
2026-01-28 23:17 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aXZJuFXFvvfsW-Qb@kernel.org \
--to=jarkko@kernel.org \
--cc=bigeasy@linutronix.de \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-devel@lists.linux.dev \
--cc=peterhuewe@gmx.de \
--cc=tglx@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox