linux-integrity.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: Jerry Snitselaar <jsnitsel@redhat.com>, linux-integrity@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, jarkko@kernel.org,
	Peter Huewe <peterhuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
	James Bottomley <James.Bottomley@HansenPartnership.com>
Subject: Re: [PATCH] tpm_tis: Disable interrupts on ThinkPad T490s
Date: Fri, 16 Oct 2020 08:10:19 +0200	[thread overview]
Message-ID: <cb153887-1044-0b48-c65a-b6257c5b91f2@redhat.com> (raw)
In-Reply-To: <20201015214430.17937-1-jsnitsel@redhat.com>

Hi,

On 10/15/20 11:44 PM, Jerry Snitselaar wrote:
> There is a misconfiguration in the bios of the gpio pin used for the
> interrupt in the T490s. When interrupts are enabled in the tpm_tis
> driver code this results in an interrupt storm. This was initially
> reported when we attempted to enable the interrupt code in the tpm_tis
> driver, which previously wasn't setting a flag to enable it. Due to
> the reports of the interrupt storm that code was reverted and we went back
> to polling instead of using interrupts. Now that we know the T490s problem
> is a firmware issue, add code to check if the system is a T490s and
> disable interrupts if that is the case. This will allow us to enable
> interrupts for everyone else. If the user has a fixed bios they can
> force the enabling of interrupts with tpm_tis.interrupts=1 on the
> kernel command line.
> 
> Cc: jarkko@kernel.org
> Cc: Peter Huewe <peterhuewe@gmx.de>
> Cc: Jason Gunthorpe <jgg@ziepe.ca>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>

Patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans


> ---
>   drivers/char/tpm/tpm_tis.c | 29 +++++++++++++++++++++++++++--
>   1 file changed, 27 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 0b214963539d..4ed6e660273a 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -27,6 +27,7 @@
>   #include <linux/of.h>
>   #include <linux/of_device.h>
>   #include <linux/kernel.h>
> +#include <linux/dmi.h>
>   #include "tpm.h"
>   #include "tpm_tis_core.h"
>   
> @@ -49,8 +50,8 @@ static inline struct tpm_tis_tcg_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *da
>   	return container_of(data, struct tpm_tis_tcg_phy, priv);
>   }
>   
> -static bool interrupts = true;
> -module_param(interrupts, bool, 0444);
> +static int interrupts = -1;
> +module_param(interrupts, int, 0444);
>   MODULE_PARM_DESC(interrupts, "Enable interrupts");
>   
>   static bool itpm;
> @@ -63,6 +64,28 @@ module_param(force, bool, 0444);
>   MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
>   #endif
>   
> +static int tpm_tis_disable_irq(const struct dmi_system_id *d)
> +{
> +	if (interrupts == -1) {
> +		pr_notice("tpm_tis: %s detected: disabling interrupts.\n", d->ident);
> +		interrupts = 0;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct dmi_system_id tpm_tis_dmi_table[] = {
> +	{
> +		.callback = tpm_tis_disable_irq,
> +		.ident = "ThinkPad T490s",
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> +			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T490s"),
> +		},
> +	},
> +	{}
> +};
> +
>   #if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
>   static int has_hid(struct acpi_device *dev, const char *hid)
>   {
> @@ -192,6 +215,8 @@ static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info)
>   	int irq = -1;
>   	int rc;
>   
> +	dmi_check_system(tpm_tis_dmi_table);
> +
>   	rc = check_acpi_tpm2(dev);
>   	if (rc)
>   		return rc;
> 


  parent reply	other threads:[~2020-10-16  6:10 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-15 21:44 [PATCH] tpm_tis: Disable interrupts on ThinkPad T490s Jerry Snitselaar
2020-10-15 22:01 ` Jerry Snitselaar
2020-10-15 22:39 ` Matthew Garrett
2020-10-16  6:12   ` Hans de Goede
2020-11-19  6:36   ` Jerry Snitselaar
2020-11-19 14:42     ` Hans de Goede
2020-11-19 17:05       ` Jerry Snitselaar
2020-11-23 12:19         ` Hans de Goede
2020-11-24  3:27       ` Jarkko Sakkinen
2020-11-24  3:29         ` Jarkko Sakkinen
2020-11-24  3:26     ` Jarkko Sakkinen
2020-11-24 17:52       ` Jerry Snitselaar
2020-11-24 18:10         ` James Bottomley
2020-11-29  3:21           ` Jarkko Sakkinen
2020-11-24 21:45         ` Hans de Goede
2020-11-29  3:23           ` Jarkko Sakkinen
2020-11-29 11:34             ` Hans de Goede
2020-12-02 16:07               ` Jarkko Sakkinen
2020-11-29  3:18         ` Jarkko Sakkinen
2020-10-16  6:10 ` Hans de Goede [this message]
2020-10-18 21:11 ` Jarkko Sakkinen
2020-10-18 21:14   ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cb153887-1044-0b48-c65a-b6257c5b91f2@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=jsnitsel@redhat.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).