From: Omar Ramirez Luna <omar.luna-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Ohad Ben-Cohen <ohad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
Laurent Pinchart
<laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 4/6] ARM: OMAP3/4: iommu: migrate to hwmod framework
Date: Fri, 15 Jun 2012 20:56:02 -0500 [thread overview]
Message-ID: <1339811764-5337-5-git-send-email-omar.luna@linaro.org> (raw)
In-Reply-To: <1339811764-5337-1-git-send-email-omar.luna-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Use hwmod data and device attributes to build and register an
omap device for iommu driver.
- Update the naming convention in isp module.
- Remove unneeded check for number of resources, as this is now
handled by omap_device and prevents driver from loading.
- Now unused, remove platform device and resource data, handling
of sysconfig register for softreset purposes, use default
latency structure.
Signed-off-by: Omar Ramirez Luna <omar.luna-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm/mach-omap2/devices.c | 2 +-
arch/arm/mach-omap2/iommu2.c | 19 ----
arch/arm/mach-omap2/omap-iommu.c | 159 ++++++-------------------------
arch/arm/plat-omap/include/plat/iommu.h | 2 +-
drivers/iommu/omap-iommu.c | 3 -
5 files changed, 33 insertions(+), 152 deletions(-)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 2a4fc0d..5b66efa 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -216,7 +216,7 @@ static struct platform_device omap3isp_device = {
};
static struct omap_iommu_arch_data omap3_isp_iommu = {
- .name = "isp",
+ .name = "isp_mmu",
};
struct isp_platform_data {
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index eefc379..35cab47 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -32,12 +32,8 @@
#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT)
#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT)
-#define MMU_SYS_SOFTRESET (1 << 1)
#define MMU_SYS_AUTOIDLE 1
-/* SYSSTATUS */
-#define MMU_SYS_RESETDONE 1
-
/* IRQSTATUS & IRQENABLE */
#define MMU_IRQ_MULTIHITFAULT (1 << 4)
#define MMU_IRQ_TABLEWALKFAULT (1 << 3)
@@ -88,7 +84,6 @@ static void __iommu_set_twl(struct omap_iommu *obj, bool on)
static int omap2_iommu_enable(struct omap_iommu *obj)
{
u32 l, pa;
- unsigned long timeout;
if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K))
return -EINVAL;
@@ -97,20 +92,6 @@ static int omap2_iommu_enable(struct omap_iommu *obj)
if (!IS_ALIGNED(pa, SZ_16K))
return -EINVAL;
- iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
-
- timeout = jiffies + msecs_to_jiffies(20);
- do {
- l = iommu_read_reg(obj, MMU_SYSSTATUS);
- if (l & MMU_SYS_RESETDONE)
- break;
- } while (!time_after(jiffies, timeout));
-
- if (!(l & MMU_SYS_RESETDONE)) {
- dev_err(obj->dev, "can't take mmu out of reset\n");
- return -ENODEV;
- }
-
l = iommu_read_reg(obj, MMU_REVISION);
dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
(l >> 4) & 0xf, l & 0xf);
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index ac49384..02d98ce 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -12,153 +12,56 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/slab.h>
#include <plat/iommu.h>
#include <plat/irqs.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
-struct iommu_device {
- resource_size_t base;
- int irq;
- struct iommu_platform_data pdata;
- struct resource res[2];
-};
-static struct iommu_device *devices;
-static int num_iommu_devices;
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct iommu_device omap3_devices[] = {
- {
- .base = 0x480bd400,
- .irq = 24,
- .pdata = {
- .name = "isp",
- .nr_tlb_entries = 8,
- .clk_name = "cam_ick",
- .da_start = 0x0,
- .da_end = 0xFFFFF000,
- },
- },
-#if defined(CONFIG_OMAP_IOMMU_IVA2)
- {
- .base = 0x5d000000,
- .irq = 28,
- .pdata = {
- .name = "iva2",
- .nr_tlb_entries = 32,
- .clk_name = "iva2_ck",
- .da_start = 0x11000000,
- .da_end = 0xFFFFF000,
- },
- },
-#endif
-};
-#define NR_OMAP3_IOMMU_DEVICES ARRAY_SIZE(omap3_devices)
-static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
-#else
-#define omap3_devices NULL
-#define NR_OMAP3_IOMMU_DEVICES 0
-#define omap3_iommu_pdev NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-static struct iommu_device omap4_devices[] = {
- {
- .base = OMAP4_MMU1_BASE,
- .irq = OMAP44XX_IRQ_DUCATI_MMU,
- .pdata = {
- .name = "ducati",
- .nr_tlb_entries = 32,
- .clk_name = "ipu_fck",
- .da_start = 0x0,
- .da_end = 0xFFFFF000,
- },
- },
-#if defined(CONFIG_MPU_TESLA_IOMMU)
- {
- .base = OMAP4_MMU2_BASE,
- .irq = INT_44XX_DSP_MMU,
- .pdata = {
- .name = "tesla",
- .nr_tlb_entries = 32,
- .clk_name = "tesla_ick",
- .da_start = 0x0,
- .da_end = 0xFFFFF000,
- },
- },
-#endif
-};
-#define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices)
-static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES];
-#else
-#define omap4_devices NULL
-#define NR_OMAP4_IOMMU_DEVICES 0
-#define omap4_iommu_pdev NULL
-#endif
-
-static struct platform_device **omap_iommu_pdev;
-
-static int __init omap_iommu_init(void)
+static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
{
- int i, err;
- struct resource res[] = {
- { .flags = IORESOURCE_MEM },
- { .flags = IORESOURCE_IRQ },
- };
+ struct platform_device *pdev;
+ struct iommu_platform_data *pdata;
+ struct omap_mmu_dev_attr *a = (struct omap_mmu_dev_attr *)oh->dev_attr;
+ static int i;
- if (cpu_is_omap34xx()) {
- devices = omap3_devices;
- omap_iommu_pdev = omap3_iommu_pdev;
- num_iommu_devices = NR_OMAP3_IOMMU_DEVICES;
- } else if (cpu_is_omap44xx()) {
- devices = omap4_devices;
- omap_iommu_pdev = omap4_iommu_pdev;
- num_iommu_devices = NR_OMAP4_IOMMU_DEVICES;
- } else
- return -ENODEV;
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
- for (i = 0; i < num_iommu_devices; i++) {
- struct platform_device *pdev;
- const struct iommu_device *d = &devices[i];
+ pdata->name = oh->name;
+ pdata->clk_name = oh->main_clk;
+ pdata->nr_tlb_entries = a->nr_tlb_entries;
+ pdata->da_start = a->da_start;
+ pdata->da_end = a->da_end;
- pdev = platform_device_alloc("omap-iommu", i);
- if (!pdev) {
- err = -ENOMEM;
- goto err_out;
- }
+ pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata),
+ NULL, 0, 0);
- res[0].start = d->base;
- res[0].end = d->base + MMU_REG_SIZE - 1;
- res[1].start = res[1].end = d->irq;
+ kfree(pdata);
- err = platform_device_add_resources(pdev, res,
- ARRAY_SIZE(res));
- if (err)
- goto err_out;
- err = platform_device_add_data(pdev, &d->pdata,
- sizeof(d->pdata));
- if (err)
- goto err_out;
- err = platform_device_add(pdev);
- if (err)
- goto err_out;
- omap_iommu_pdev[i] = pdev;
+ if (IS_ERR(pdev)) {
+ pr_err("%s: device build err: %ld\n", __func__, PTR_ERR(pdev));
+ return PTR_ERR(pdev);
}
+
+ i++;
+
return 0;
+}
-err_out:
- while (i--)
- platform_device_put(omap_iommu_pdev[i]);
- return err;
+static int __init omap_iommu_init(void)
+{
+ return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL);
}
/* must be ready before omap3isp is probed */
subsys_initcall(omap_iommu_init);
static void __exit omap_iommu_exit(void)
{
- int i;
-
- for (i = 0; i < num_iommu_devices; i++)
- platform_device_unregister(omap_iommu_pdev[i]);
+ /* Do nothing */
}
module_exit(omap_iommu_exit);
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 44518cc..ed56424 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -119,7 +119,7 @@ struct omap_mmu_dev_attr {
struct iommu_platform_data {
const char *name;
const char *clk_name;
- const int nr_tlb_entries;
+ int nr_tlb_entries;
u32 da_start;
u32 da_end;
};
diff --git a/drivers/iommu/omap-iommu.c b/drivers/iommu/omap-iommu.c
index 9bdbf2f..93d7d84 100644
--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -906,9 +906,6 @@ static int __devinit omap_iommu_probe(struct platform_device *pdev)
struct resource *res;
struct iommu_platform_data *pdata = pdev->dev.platform_data;
- if (pdev->num_resources != 2)
- return -EINVAL;
-
obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
if (!obj)
return -ENOMEM;
--
1.7.4.1
next prev parent reply other threads:[~2012-06-16 1:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-16 1:55 [PATCH 0/6] OMAP: iommu: hwmod, reset handling and runtime PM Omar Ramirez Luna
[not found] ` <1339811764-5337-1-git-send-email-omar.luna-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2012-06-16 1:55 ` [PATCH 1/6] ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected Omar Ramirez Luna
2012-06-16 1:56 ` [PATCH 2/6] ARM: OMAP3: hwmod data: add mmu data for iva and isp Omar Ramirez Luna
2012-06-16 1:56 ` [PATCH 3/6] ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp Omar Ramirez Luna
2012-06-19 12:36 ` Cousson, Benoit
2012-06-19 16:39 ` Omar Ramirez Luna
2012-06-19 17:48 ` Cousson, Benoit
2012-06-28 1:27 ` Omar Ramirez Luna
2012-07-09 13:50 ` Omar Ramirez Luna
2012-06-16 1:56 ` Omar Ramirez Luna [this message]
2012-06-16 1:56 ` [PATCH 5/6] ARM: OMAP2+: iommu: add reset handling Omar Ramirez Luna
2012-07-17 10:11 ` [PATCH 0/6] OMAP: iommu: hwmod, reset handling and runtime PM Joerg Roedel
2012-07-17 10:51 ` Ohad Ben-Cohen
2012-07-18 17:15 ` Omar Ramirez Luna
2012-06-16 1:56 ` [PATCH 6/6] ARM: OMAP3/4: iommu: adapt to runtime pm Omar Ramirez Luna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339811764-5337-5-git-send-email-omar.luna@linaro.org \
--to=omar.luna-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=b-cousson-l0cyMroinI0@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ohad-Ix1uc/W3ht7QT0dZR+AlfA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).