From: Andreas Herrmann <andreas.herrmann-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
To: Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>
Cc: Andreas Herrmann
<andreas.herrmann-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
Rob Herring <robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 5/5] ARM: dts: Add nodes for SMMUs on Calxeda ECX-2000
Date: Tue, 8 Oct 2013 11:27:24 +0200 [thread overview]
Message-ID: <1381224444-27303-6-git-send-email-andreas.herrmann@calxeda.com> (raw)
In-Reply-To: <1381224444-27303-1-git-send-email-andreas.herrmann-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: Andreas Herrmann <andreas.herrmann-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/ecx-2000.dts | 45 +++++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/ecx-common.dtsi | 9 +++++---
2 files changed, 49 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 139b40c..4444905 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -76,10 +76,11 @@
};
soc {
- ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
+ ranges = <0x0 0x0 0x0 0xffffffff>;
timer {
- compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; interrupts = <1 13 0xf08>,
+ compatible = "arm,cortex-a15-timer", "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
@@ -103,6 +104,46 @@
interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
};
};
+
+ soc@920000000 {
+ ranges = <0x9 0x20000000 0x9 0x20000000 0x290000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+
+ smmu_mac0: smmu@920000000 {
+ compatible = "arm,mmu-400";
+ reg = <0x9 0x20000000 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = <0 106 4 0 106 4>;
+ mmu-masters = <&mac0 0x0 0x1>;
+ arm,smmu-secure-config-access;
+ arm,smmu-isolate-devices;
+ };
+
+ smmu_mac1: smmu@920080000 {
+ compatible = "arm,mmu-400";
+ reg = <0x9 0x20080000 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = <0 108 4 0 108 4>;
+ mmu-masters = <&mac1 0x0 0x1>;
+ arm,smmu-secure-config-access;
+ arm,smmu-isolate-devices;
+ };
+
+ smmu_sata: smmu@920180000 {
+ compatible = "arm,mmu-400";
+ reg = <0x00000009 0x20180000 0x10000>;
+ mmu-masters = <&sata>;
+ #global-interrupts = <1>;
+ interrupts = <0 114 4 0 114 4>;
+ arm,smmu-secure-config-access;
+ arm,smmu-isolate-devices;
+ arm,smmu-mask-stream-ids;
+ };
+ };
+
};
/include/ "ecx-common.dtsi"
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index e8559b7..50e401e 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -25,7 +25,7 @@
compatible = "simple-bus";
interrupt-parent = <&intc>;
- sata@ffe08000 {
+ sata: sata@ffe08000 {
compatible = "calxeda,hb-ahci";
reg = <0xffe08000 0x10000>;
interrupts = <0 83 4>;
@@ -35,6 +35,7 @@
&combophy0 3>;
calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
calxeda,led-order = <4 0 1 2 3>;
+ #stream-id-cells = <0>;
};
sdhci@ffe0e000 {
@@ -208,18 +209,20 @@
clock-names = "apb_pclk";
};
- ethernet@fff50000 {
+ mac0: ethernet@fff50000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff50000 0x1000>;
interrupts = <0 77 4 0 78 4 0 79 4>;
dma-coherent;
+ #stream-id-cells = <2>;
};
- ethernet@fff51000 {
+ mac1: ethernet@fff51000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff51000 0x1000>;
interrupts = <0 80 4 0 81 4 0 82 4>;
dma-coherent;
+ #stream-id-cells = <2>;
};
combophy0: combo-phy@fff58000 {
--
1.7.9.5
next prev parent reply other threads:[~2013-10-08 9:27 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-08 9:27 [PATCH 0/5] iommu/arm-smmu: Misc modifications to support SMMUs on Calxeda ECX-2000 Andreas Herrmann
[not found] ` <1381224444-27303-1-git-send-email-andreas.herrmann-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
2013-10-08 9:27 ` [PATCH 1/5] iommu/arm-smmu: Introduce driver option handling Andreas Herrmann
[not found] ` <1381224444-27303-2-git-send-email-andreas.herrmann-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
2013-10-08 15:06 ` Will Deacon
[not found] ` <20131008150613.GC21189-MRww78TxoiP5vMa5CHWGZ34zcgK1vI+I0E9HWUfgJXw@public.gmane.org>
2013-10-08 15:16 ` Andreas Herrmann
2013-10-08 9:27 ` [PATCH 2/5] iommu/arm-smmu: Introduce bus notifier block Andreas Herrmann
2013-10-08 9:27 ` [PATCH 3/5] iommu/arm-smmu: Introduce stream ID masking Andreas Herrmann
[not found] ` <1381224444-27303-4-git-send-email-andreas.herrmann-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
2013-10-08 15:10 ` Will Deacon
[not found] ` <20131008151007.GD21189-MRww78TxoiP5vMa5CHWGZ34zcgK1vI+I0E9HWUfgJXw@public.gmane.org>
2013-10-08 15:20 ` Andreas Herrmann
2013-10-08 16:40 ` Andreas Herrmann
2013-10-08 16:59 ` Will Deacon
[not found] ` <20131008165920.GG21189-MRww78TxoiP5vMa5CHWGZ34zcgK1vI+I0E9HWUfgJXw@public.gmane.org>
2013-10-08 18:18 ` Sethi Varun-B16395
2013-10-08 18:43 ` Rob Herring
[not found] ` <52545266.6010400-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-09 10:09 ` Will Deacon
[not found] ` <20131009100917.GB5985-MRww78TxoiP5vMa5CHWGZ34zcgK1vI+I0E9HWUfgJXw@public.gmane.org>
2013-10-09 23:10 ` Andreas Herrmann
2013-10-09 22:55 ` Andreas Herrmann
2013-10-08 9:27 ` [PATCH 4/5] iommu/arm-smmu: Support buggy implementations where all config accesses are secure Andreas Herrmann
2013-10-08 9:27 ` Andreas Herrmann [this message]
2013-10-08 10:31 ` [PATCH] documentation/iommu: Update description of ARM System MMU binding Andreas Herrmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381224444-27303-6-git-send-email-andreas.herrmann@calxeda.com \
--to=andreas.herrmann-bsgfqqb8/dxbdgjk7y7tuq@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).