[PATCH 0/3 v2] iommu/fsl: PAMU driver fixes.

[PATCH 0/3 v2] iommu/fsl: PAMU driver fixes.

[Varun Sethi]

The first patch fixes a build failure, when we try to build for a Freescale
platform without PCI support.

The second patch enables a default DMA window for the device, once it's
detached from a domain. In case of vfio, once device is detached from a
guest it can be again used by the host.

The last patch adds the maintainer entry for the Freescale PAMU driver.

Varun Sethi (3):
  iommu/fsl: Factor out PCI specific code.
  iommu/fsl: Enable default DMA window for PCIe devices once detached
  Add maintainers entry for the Freescale PAMU driver.

 MAINTAINERS                     |    7 ++
 drivers/iommu/fsl_pamu.c        |   43 ++++++++++---
 drivers/iommu/fsl_pamu.h        |    1 +
 drivers/iommu/fsl_pamu_domain.c |  134 +++++++++++++++++++++++++--------------
 4 files changed, 128 insertions(+), 57 deletions(-)

-- 
1.7.9.5

[PATCH 1/3 v2] iommu/fsl: Factor out PCI specific code.

[Varun Sethi]

Factor out PCI specific code in the PAMU driver.

Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 drivers/iommu/fsl_pamu_domain.c |   88 +++++++++++++++++++--------------------
 1 file changed, 43 insertions(+), 45 deletions(-)

diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
index c857c30..966ae70 100644
--- a/drivers/iommu/fsl_pamu_domain.c
+++ b/drivers/iommu/fsl_pamu_domain.c
@@ -677,21 +677,15 @@ static int handle_attach_device(struct fsl_dma_domain *dma_domain,
 	return ret;
 }
 
-static int fsl_pamu_attach_device(struct iommu_domain *domain,
-				  struct device *dev)
+static struct device *get_dma_device(struct device *dev)
 {
-	struct fsl_dma_domain *dma_domain = domain->priv;
-	const u32 *liodn;
-	u32 liodn_cnt;
-	int len, ret = 0;
-	struct pci_dev *pdev = NULL;
-	struct pci_controller *pci_ctl;
+	struct device *dma_dev = dev;
+#ifdef CONFIG_PCI
 
-	/*
-	 * Use LIODN of the PCI controller while attaching a
-	 * PCI device.
-	 */
 	if (dev->bus == &pci_bus_type) {
+		struct pci_controller *pci_ctl;
+		struct pci_dev *pdev;
+
 		pdev = to_pci_dev(dev);
 		pci_ctl = pci_bus_to_host(pdev->bus);
 		/*
@@ -699,17 +693,31 @@ static int fsl_pamu_attach_device(struct iommu_domain *domain,
 		 * so we can get the LIODN programmed by
 		 * u-boot.
 		 */
-		dev = pci_ctl->parent;
+		dma_dev = pci_ctl->parent;
 	}
+#endif
+	return dma_dev;
+}
+
+static int fsl_pamu_attach_device(struct iommu_domain *domain,
+				  struct device *dev)
+{
+	struct fsl_dma_domain *dma_domain = domain->priv;
+	struct device *dma_dev;
+	const u32 *liodn;
+	u32 liodn_cnt;
+	int len, ret = 0;
+
+	dma_dev = get_dma_device(dev);
 
-	liodn = of_get_property(dev->of_node, "fsl,liodn", &len);
+	liodn = of_get_property(dma_dev->of_node, "fsl,liodn", &len);
 	if (liodn) {
 		liodn_cnt = len / sizeof(u32);
 		ret = handle_attach_device(dma_domain, dev,
 					 liodn, liodn_cnt);
 	} else {
 		pr_debug("missing fsl,liodn property at %s\n",
-		          dev->of_node->full_name);
+		          dma_dev->of_node->full_name);
 			ret = -EINVAL;
 	}
 
@@ -720,32 +728,18 @@ static void fsl_pamu_detach_device(struct iommu_domain *domain,
 				      struct device *dev)
 {
 	struct fsl_dma_domain *dma_domain = domain->priv;
+	struct device *dma_dev;
 	const u32 *prop;
 	int len;
-	struct pci_dev *pdev = NULL;
-	struct pci_controller *pci_ctl;
 
-	/*
-	 * Use LIODN of the PCI controller while detaching a
-	 * PCI device.
-	 */
-	if (dev->bus == &pci_bus_type) {
-		pdev = to_pci_dev(dev);
-		pci_ctl = pci_bus_to_host(pdev->bus);
-		/*
-		 * make dev point to pci controller device
-		 * so we can get the LIODN programmed by
-		 * u-boot.
-		 */
-		dev = pci_ctl->parent;
-	}
+	dma_dev = get_dma_device(dev);
 
-	prop = of_get_property(dev->of_node, "fsl,liodn", &len);
+	prop = of_get_property(dma_dev->of_node, "fsl,liodn", &len);
 	if (prop)
 		detach_device(dev, dma_domain);
 	else
 		pr_debug("missing fsl,liodn property at %s\n",
-		          dev->of_node->full_name);
+		          dma_dev->of_node->full_name);
 }
 
 static  int configure_domain_geometry(struct iommu_domain *domain, void *data)
@@ -905,6 +899,7 @@ static struct iommu_group *get_device_iommu_group(struct device *dev)
 	return group;
 }
 
+#ifdef CONFIG_PCI
 static  bool check_pci_ctl_endpt_part(struct pci_controller *pci_ctl)
 {
 	u32 version;
@@ -945,13 +940,18 @@ static struct iommu_group *get_shared_pci_device_group(struct pci_dev *pdev)
 	return NULL;
 }
 
-static struct iommu_group *get_pci_device_group(struct pci_dev *pdev)
+static struct iommu_group *get_pci_device_group(struct device *dev)
 {
 	struct pci_controller *pci_ctl;
 	bool pci_endpt_partioning;
 	struct iommu_group *group = NULL;
-	struct pci_dev *bridge, *dma_pdev = NULL;
+	struct pci_dev *bridge, *pdev;
+	struct pci_dev *dma_pdev = NULL;
 
+	pdev = to_pci_dev(dev);
+	/* Don't create device groups for virtual PCI bridges */
+	if (pdev->subordinate)
+		return NULL;
 	pci_ctl = pci_bus_to_host(pdev->bus);
 	pci_endpt_partioning = check_pci_ctl_endpt_part(pci_ctl);
 	/* We can partition PCIe devices so assign device group to the device */
@@ -1044,11 +1044,11 @@ root_bus:
 
 	return group;
 }
+#endif
 
 static int fsl_pamu_add_device(struct device *dev)
 {
 	struct iommu_group *group = NULL;
-	struct pci_dev *pdev;
 	const u32 *prop;
 	int ret, len;
 
@@ -1056,19 +1056,15 @@ static int fsl_pamu_add_device(struct device *dev)
 	 * For platform devices we allocate a separate group for
 	 * each of the devices.
 	 */
-	if (dev->bus == &pci_bus_type) {
-		pdev = to_pci_dev(dev);
-		/* Don't create device groups for virtual PCI bridges */
-		if (pdev->subordinate)
-			return 0;
-
-		group = get_pci_device_group(pdev);
-
-	} else {
+	if (dev->bus == &platform_bus_type) {
 		prop = of_get_property(dev->of_node, "fsl,liodn", &len);
 		if (prop)
 			group = get_device_iommu_group(dev);
 	}
+#ifdef CONFIG_PCI
+	else
+		group = get_pci_device_group(dev);
+#endif
 
 	if (!group || IS_ERR(group))
 		return PTR_ERR(group);
@@ -1166,7 +1162,9 @@ int pamu_domain_init()
 		return ret;
 
 	bus_set_iommu(&platform_bus_type, &fsl_pamu_ops);
+#ifdef CONFIG_PCI
 	bus_set_iommu(&pci_bus_type, &fsl_pamu_ops);
+#endif
 
 	return ret;
 }
-- 
1.7.9.5

Re: [PATCH 1/3 v2] iommu/fsl: Factor out PCI specific code.

[Alex Williamson]

On Wed, 2013-10-16 at 16:53 +0530, Varun Sethi wrote:
> Factor out PCI specific code in the PAMU driver.
> 
> Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  drivers/iommu/fsl_pamu_domain.c |   88 +++++++++++++++++++--------------------
>  1 file changed, 43 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
> index c857c30..966ae70 100644
> --- a/drivers/iommu/fsl_pamu_domain.c
> +++ b/drivers/iommu/fsl_pamu_domain.c
> @@ -677,21 +677,15 @@ static int handle_attach_device(struct fsl_dma_domain *dma_domain,
>  	return ret;
>  }
>  
> -static int fsl_pamu_attach_device(struct iommu_domain *domain,
> -				  struct device *dev)
> +static struct device *get_dma_device(struct device *dev)
>  {
> -	struct fsl_dma_domain *dma_domain = domain->priv;
> -	const u32 *liodn;
> -	u32 liodn_cnt;
> -	int len, ret = 0;
> -	struct pci_dev *pdev = NULL;
> -	struct pci_controller *pci_ctl;
> +	struct device *dma_dev = dev;
> +#ifdef CONFIG_PCI
>  
> -	/*
> -	 * Use LIODN of the PCI controller while attaching a
> -	 * PCI device.
> -	 */
>  	if (dev->bus == &pci_bus_type) {
> +		struct pci_controller *pci_ctl;
> +		struct pci_dev *pdev;
> +
>  		pdev = to_pci_dev(dev);
>  		pci_ctl = pci_bus_to_host(pdev->bus);
>  		/*
> @@ -699,17 +693,31 @@ static int fsl_pamu_attach_device(struct iommu_domain *domain,
>  		 * so we can get the LIODN programmed by
>  		 * u-boot.
>  		 */
> -		dev = pci_ctl->parent;
> +		dma_dev = pci_ctl->parent;
>  	}
> +#endif
> +	return dma_dev;
> +}
> +
> +static int fsl_pamu_attach_device(struct iommu_domain *domain,
> +				  struct device *dev)
> +{
> +	struct fsl_dma_domain *dma_domain = domain->priv;
> +	struct device *dma_dev;
> +	const u32 *liodn;
> +	u32 liodn_cnt;
> +	int len, ret = 0;
> +
> +	dma_dev = get_dma_device(dev);
>  
> -	liodn = of_get_property(dev->of_node, "fsl,liodn", &len);
> +	liodn = of_get_property(dma_dev->of_node, "fsl,liodn", &len);
>  	if (liodn) {
>  		liodn_cnt = len / sizeof(u32);
>  		ret = handle_attach_device(dma_domain, dev,
>  					 liodn, liodn_cnt);
>  	} else {
>  		pr_debug("missing fsl,liodn property at %s\n",
> -		          dev->of_node->full_name);
> +		          dma_dev->of_node->full_name);
>  			ret = -EINVAL;
>  	}
>  
> @@ -720,32 +728,18 @@ static void fsl_pamu_detach_device(struct iommu_domain *domain,
>  				      struct device *dev)
>  {
>  	struct fsl_dma_domain *dma_domain = domain->priv;
> +	struct device *dma_dev;
>  	const u32 *prop;
>  	int len;
> -	struct pci_dev *pdev = NULL;
> -	struct pci_controller *pci_ctl;
>  
> -	/*
> -	 * Use LIODN of the PCI controller while detaching a
> -	 * PCI device.
> -	 */
> -	if (dev->bus == &pci_bus_type) {
> -		pdev = to_pci_dev(dev);
> -		pci_ctl = pci_bus_to_host(pdev->bus);
> -		/*
> -		 * make dev point to pci controller device
> -		 * so we can get the LIODN programmed by
> -		 * u-boot.
> -		 */
> -		dev = pci_ctl->parent;
> -	}
> +	dma_dev = get_dma_device(dev);
>  
> -	prop = of_get_property(dev->of_node, "fsl,liodn", &len);
> +	prop = of_get_property(dma_dev->of_node, "fsl,liodn", &len);
>  	if (prop)
>  		detach_device(dev, dma_domain);
>  	else
>  		pr_debug("missing fsl,liodn property at %s\n",
> -		          dev->of_node->full_name);
> +		          dma_dev->of_node->full_name);
>  }
>  
>  static  int configure_domain_geometry(struct iommu_domain *domain, void *data)
> @@ -905,6 +899,7 @@ static struct iommu_group *get_device_iommu_group(struct device *dev)
>  	return group;
>  }
>  
> +#ifdef CONFIG_PCI
>  static  bool check_pci_ctl_endpt_part(struct pci_controller *pci_ctl)
>  {
>  	u32 version;
> @@ -945,13 +940,18 @@ static struct iommu_group *get_shared_pci_device_group(struct pci_dev *pdev)
>  	return NULL;
>  }
>  
> -static struct iommu_group *get_pci_device_group(struct pci_dev *pdev)
> +static struct iommu_group *get_pci_device_group(struct device *dev)
>  {
>  	struct pci_controller *pci_ctl;
>  	bool pci_endpt_partioning;
>  	struct iommu_group *group = NULL;
> -	struct pci_dev *bridge, *dma_pdev = NULL;
> +	struct pci_dev *bridge, *pdev;
> +	struct pci_dev *dma_pdev = NULL;
>  
> +	pdev = to_pci_dev(dev);
> +	/* Don't create device groups for virtual PCI bridges */
> +	if (pdev->subordinate)
> +		return NULL;
>  	pci_ctl = pci_bus_to_host(pdev->bus);
>  	pci_endpt_partioning = check_pci_ctl_endpt_part(pci_ctl);
>  	/* We can partition PCIe devices so assign device group to the device */
> @@ -1044,11 +1044,11 @@ root_bus:
>  
>  	return group;
>  }
> +#endif
>  
>  static int fsl_pamu_add_device(struct device *dev)
>  {
>  	struct iommu_group *group = NULL;
> -	struct pci_dev *pdev;
>  	const u32 *prop;
>  	int ret, len;
>  
> @@ -1056,19 +1056,15 @@ static int fsl_pamu_add_device(struct device *dev)
>  	 * For platform devices we allocate a separate group for
>  	 * each of the devices.
>  	 */
> -	if (dev->bus == &pci_bus_type) {
> -		pdev = to_pci_dev(dev);
> -		/* Don't create device groups for virtual PCI bridges */
> -		if (pdev->subordinate)
> -			return 0;
> -
> -		group = get_pci_device_group(pdev);
> -
> -	} else {
> +	if (dev->bus == &platform_bus_type) {
>  		prop = of_get_property(dev->of_node, "fsl,liodn", &len);
>  		if (prop)
>  			group = get_device_iommu_group(dev);
>  	}
> +#ifdef CONFIG_PCI
> +	else
> +		group = get_pci_device_group(dev);
> +#endif
>  
>  	if (!group || IS_ERR(group))
>  		return PTR_ERR(group);

It feels like there's a bug here that group is initialized to NULL and
there are a few ways for it to remain NULL through the above code, then
we get here and return PTR_ERR(NULL), which is indistinguishable from a
successful return below.  Perhaps !group is ok, but if so I'd suggest a
separate return block for it.  Thanks,

Alex

> @@ -1166,7 +1162,9 @@ int pamu_domain_init()
>  		return ret;
>  
>  	bus_set_iommu(&platform_bus_type, &fsl_pamu_ops);
> +#ifdef CONFIG_PCI
>  	bus_set_iommu(&pci_bus_type, &fsl_pamu_ops);
> +#endif
>  
>  	return ret;
>  }

[PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Varun Sethi]

Once the PCIe device assigned to a guest VM (via VFIO) gets detached from the iommu domain
(when guest terminates), its PAMU table entry is disabled. So, this would prevent the device
from being used once it's assigned back to the host.

This patch allows for creation of a default DMA window corresponding to the device
and subsequently enabling the PAMU table entry. Before we enable the entry, we ensure that
the device's bus master capability is disabled (device quiesced).

Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 drivers/iommu/fsl_pamu.c        |   43 ++++++++++++++++++++++++++++--------
 drivers/iommu/fsl_pamu.h        |    1 +
 drivers/iommu/fsl_pamu_domain.c |   46 ++++++++++++++++++++++++++++++++++++---
 3 files changed, 78 insertions(+), 12 deletions(-)

diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
index cba0498..fb4a031 100644
--- a/drivers/iommu/fsl_pamu.c
+++ b/drivers/iommu/fsl_pamu.c
@@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct paace *paace, u32 wnum)
 	return spaace;
 }
 
+/*
+ * Defaul PPAACE settings for an LIODN.
+ */
+static void setup_default_ppaace(struct paace *ppaace)
+{
+	pamu_init_ppaace(ppaace);
+	/* window size is 2^(WSE+1) bytes */
+	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
+	ppaace->wbah = 0;
+	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
+	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
+		PAACE_ATM_NO_XLATE);
+	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
+		PAACE_AP_PERMS_ALL);
+}
 /**
  * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves subwindows
  *                                required for primary PAACE in the secondary
@@ -253,6 +268,24 @@ static unsigned long pamu_get_fspi_and_allocate(u32 subwin_cnt)
 	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct paace));
 }
 
+/* Reset the PAACE entry to the default state */
+void enable_default_dma_window(int liodn)
+{
+	struct paace *ppaace;
+
+	ppaace = pamu_get_ppaace(liodn);
+	if (!ppaace) {
+		pr_debug("Invalid liodn entry\n");
+		return;
+	}
+
+	memset(ppaace, 0, sizeof(struct paace));
+
+	setup_default_ppaace(ppaace);
+	mb();
+	pamu_enable_liodn(liodn);
+}
+
 /* Release the subwindows reserved for a particular LIODN */
 void pamu_free_subwins(int liodn)
 {
@@ -752,15 +785,7 @@ static void __init setup_liodns(void)
 				continue;
 			}
 			ppaace = pamu_get_ppaace(liodn);
-			pamu_init_ppaace(ppaace);
-			/* window size is 2^(WSE+1) bytes */
-			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
-			ppaace->wbah = 0;
-			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
-			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
-				PAACE_ATM_NO_XLATE);
-			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
-				PAACE_AP_PERMS_ALL);
+			setup_default_ppaace(ppaace);
 			if (of_device_is_compatible(node, "fsl,qman-portal"))
 				setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
 			if (of_device_is_compatible(node, "fsl,qman"))
diff --git a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h
index 8fc1a12..0edcbbbb 100644
--- a/drivers/iommu/fsl_pamu.h
+++ b/drivers/iommu/fsl_pamu.h
@@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct device *dev);
 int  pamu_update_paace_stash(int liodn, u32 subwin, u32 value);
 int pamu_disable_spaace(int liodn, u32 subwin);
 u32 pamu_get_max_subwin_cnt(void);
+void enable_default_dma_window(int liodn);
 
 #endif  /* __FSL_PAMU_H */
diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
index 966ae70..dd6cafc 100644
--- a/drivers/iommu/fsl_pamu_domain.c
+++ b/drivers/iommu/fsl_pamu_domain.c
@@ -340,17 +340,57 @@ static inline struct device_domain_info *find_domain(struct device *dev)
 	return dev->archdata.iommu_domain;
 }
 
+/* Disable device DMA capability and enable default DMA window */
+static void disable_device_dma(struct device_domain_info *info,
+				int enable_dma_window)
+{
+#ifdef CONFIG_PCI
+	if (info->dev->bus == &pci_bus_type) {
+		struct pci_dev *pdev = NULL;
+		pdev = to_pci_dev(info->dev);
+		if (pci_is_enabled(pdev))
+			pci_disable_device(pdev);
+	}
+#endif
+
+	if (enable_dma_window)
+		enable_default_dma_window(info->liodn);
+}
+
+static int check_for_shared_liodn(struct device_domain_info *info)
+{
+	struct device_domain_info *tmp;
+
+	/*
+	 * Sanity check, to ensure that this is not a
+	 * shared LIODN. In case of a PCIe controller
+	 * it's possible that all PCIe devices share
+	 * the same LIODN.
+	 */
+	list_for_each_entry(tmp, &info->domain->devices, link) {
+		if (info->liodn == tmp->liodn)
+			return 1;
+	}
+
+	return 0;
+}
+
 static void remove_device_ref(struct device_domain_info *info, u32 win_cnt)
 {
 	unsigned long flags;
+	int enable_dma_window = 0;
 
 	list_del(&info->link);
 	spin_lock_irqsave(&iommu_lock, flags);
-	if (win_cnt > 1)
-		pamu_free_subwins(info->liodn);
-	pamu_disable_liodn(info->liodn);
+	if (!check_for_shared_liodn(info)) {
+		if (win_cnt > 1)
+			pamu_free_subwins(info->liodn);
+		pamu_disable_liodn(info->liodn);
+		enable_dma_window = 1;
+	}
 	spin_unlock_irqrestore(&iommu_lock, flags);
 	spin_lock_irqsave(&device_domain_lock, flags);
+	disable_device_dma(info, enable_dma_window);
 	info->dev->archdata.iommu_domain = NULL;
 	kmem_cache_free(iommu_devinfo_cache, info);
 	spin_unlock_irqrestore(&device_domain_lock, flags);
-- 
1.7.9.5

RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Bhushan Bharat-R65777]

> -----Original Message-----
> From: Sethi Varun-B16395
> Sent: Wednesday, October 16, 2013 4:53 PM
> To: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linuxppc-
> dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder Stuart-B08248; Wood
> Scott-B07421; alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org; Bhushan Bharat-R65777
> Cc: Sethi Varun-B16395
> Subject: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices
> 
> Once the PCIe device assigned to a guest VM (via VFIO) gets detached from the
> iommu domain (when guest terminates), its PAMU table entry is disabled. So, this
> would prevent the device from being used once it's assigned back to the host.
> 
> This patch allows for creation of a default DMA window corresponding to the
> device and subsequently enabling the PAMU table entry. Before we enable the
> entry, we ensure that the device's bus master capability is disabled (device
> quiesced).
> 
> Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  drivers/iommu/fsl_pamu.c        |   43 ++++++++++++++++++++++++++++--------
>  drivers/iommu/fsl_pamu.h        |    1 +
>  drivers/iommu/fsl_pamu_domain.c |   46 ++++++++++++++++++++++++++++++++++++---
>  3 files changed, 78 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c index
> cba0498..fb4a031 100644
> --- a/drivers/iommu/fsl_pamu.c
> +++ b/drivers/iommu/fsl_pamu.c
> @@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct paace *paace,
> u32 wnum)
>  	return spaace;
>  }
> 
> +/*
> + * Defaul PPAACE settings for an LIODN.
> + */
> +static void setup_default_ppaace(struct paace *ppaace) {
> +	pamu_init_ppaace(ppaace);
> +	/* window size is 2^(WSE+1) bytes */
> +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> +	ppaace->wbah = 0;
> +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> +		PAACE_ATM_NO_XLATE);
> +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> +		PAACE_AP_PERMS_ALL);
> +}
>  /**
>   * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves subwindows
>   *                                required for primary PAACE in the secondary
> @@ -253,6 +268,24 @@ static unsigned long pamu_get_fspi_and_allocate(u32
> subwin_cnt)
>  	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct paace));  }
> 
> +/* Reset the PAACE entry to the default state */ void
> +enable_default_dma_window(int liodn) {
> +	struct paace *ppaace;
> +
> +	ppaace = pamu_get_ppaace(liodn);
> +	if (!ppaace) {
> +		pr_debug("Invalid liodn entry\n");
> +		return;
> +	}
> +
> +	memset(ppaace, 0, sizeof(struct paace));
> +
> +	setup_default_ppaace(ppaace);
> +	mb();
> +	pamu_enable_liodn(liodn);
> +}
> +
>  /* Release the subwindows reserved for a particular LIODN */  void
> pamu_free_subwins(int liodn)  { @@ -752,15 +785,7 @@ static void __init
> setup_liodns(void)
>  				continue;
>  			}
>  			ppaace = pamu_get_ppaace(liodn);
> -			pamu_init_ppaace(ppaace);
> -			/* window size is 2^(WSE+1) bytes */
> -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> -			ppaace->wbah = 0;
> -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> -				PAACE_ATM_NO_XLATE);
> -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> -				PAACE_AP_PERMS_ALL);
> +			setup_default_ppaace(ppaace);
>  			if (of_device_is_compatible(node, "fsl,qman-portal"))
>  				setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
>  			if (of_device_is_compatible(node, "fsl,qman")) diff --git
> a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h index 8fc1a12..0edcbbbb
> 100644
> --- a/drivers/iommu/fsl_pamu.h
> +++ b/drivers/iommu/fsl_pamu.h
> @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct device *dev);  int
> pamu_update_paace_stash(int liodn, u32 subwin, u32 value);  int
> pamu_disable_spaace(int liodn, u32 subwin);
>  u32 pamu_get_max_subwin_cnt(void);
> +void enable_default_dma_window(int liodn);
> 
>  #endif  /* __FSL_PAMU_H */
> diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
> index 966ae70..dd6cafc 100644
> --- a/drivers/iommu/fsl_pamu_domain.c
> +++ b/drivers/iommu/fsl_pamu_domain.c
> @@ -340,17 +340,57 @@ static inline struct device_domain_info
> *find_domain(struct device *dev)
>  	return dev->archdata.iommu_domain;
>  }
> 
> +/* Disable device DMA capability and enable default DMA window */
> +static void disable_device_dma(struct device_domain_info *info,
> +				int enable_dma_window)
> +{
> +#ifdef CONFIG_PCI
> +	if (info->dev->bus == &pci_bus_type) {
> +		struct pci_dev *pdev = NULL;
> +		pdev = to_pci_dev(info->dev);
> +		if (pci_is_enabled(pdev))
> +			pci_disable_device(pdev);
> +	}
> +#endif
> +
> +	if (enable_dma_window)
> +		enable_default_dma_window(info->liodn);
> +}
> +
> +static int check_for_shared_liodn(struct device_domain_info *info) {
> +	struct device_domain_info *tmp;
> +
> +	/*
> +	 * Sanity check, to ensure that this is not a
> +	 * shared LIODN. In case of a PCIe controller
> +	 * it's possible that all PCIe devices share
> +	 * the same LIODN.
> +	 */
> +	list_for_each_entry(tmp, &info->domain->devices, link) {
> +		if (info->liodn == tmp->liodn)
> +			return 1;
> +	}
> +
> +	return 0;
> +}
> +
>  static void remove_device_ref(struct device_domain_info *info, u32 win_cnt)  {
>  	unsigned long flags;
> +	int enable_dma_window = 0;
> 
>  	list_del(&info->link);
>  	spin_lock_irqsave(&iommu_lock, flags);
> -	if (win_cnt > 1)
> -		pamu_free_subwins(info->liodn);
> -	pamu_disable_liodn(info->liodn);
> +	if (!check_for_shared_liodn(info)) {

One query; Do we really need to check for this?

Otherwise this patch series looks good to me.

Thanks
-Bharat

> +		if (win_cnt > 1)
> +			pamu_free_subwins(info->liodn);
> +		pamu_disable_liodn(info->liodn);
> +		enable_dma_window = 1;
> +	}
>  	spin_unlock_irqrestore(&iommu_lock, flags);
>  	spin_lock_irqsave(&device_domain_lock, flags);
> +	disable_device_dma(info, enable_dma_window);
>  	info->dev->archdata.iommu_domain = NULL;
>  	kmem_cache_free(iommu_devinfo_cache, info);
>  	spin_unlock_irqrestore(&device_domain_lock, flags);
> --
> 1.7.9.5

RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Sethi Varun-B16395]

> -----Original Message-----
> From: Bhushan Bharat-R65777
> Sent: Wednesday, October 16, 2013 10:20 PM
> To: Sethi Varun-B16395; joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs/ROKNJybVBZg@public.gmane.org
> foundation.org; linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-
> kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder Stuart-B08248; Wood Scott-B07421;
> alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
> Subject: RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe
> devices
> 
> 
> 
> > -----Original Message-----
> > From: Sethi Varun-B16395
> > Sent: Wednesday, October 16, 2013 4:53 PM
> > To: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linuxppc-
> > dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder
> > Stuart-B08248; Wood Scott-B07421; alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org; Bhushan
> > Bharat-R65777
> > Cc: Sethi Varun-B16395
> > Subject: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe
> > devices
> >
> > Once the PCIe device assigned to a guest VM (via VFIO) gets detached
> > from the iommu domain (when guest terminates), its PAMU table entry is
> > disabled. So, this would prevent the device from being used once it's
> assigned back to the host.
> >
> > This patch allows for creation of a default DMA window corresponding
> > to the device and subsequently enabling the PAMU table entry. Before
> > we enable the entry, we ensure that the device's bus master capability
> > is disabled (device quiesced).
> >
> > Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > ---
> >  drivers/iommu/fsl_pamu.c        |   43 ++++++++++++++++++++++++++++---
> -----
> >  drivers/iommu/fsl_pamu.h        |    1 +
> >  drivers/iommu/fsl_pamu_domain.c |   46
> ++++++++++++++++++++++++++++++++++++---
> >  3 files changed, 78 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c index
> > cba0498..fb4a031 100644
> > --- a/drivers/iommu/fsl_pamu.c
> > +++ b/drivers/iommu/fsl_pamu.c
> > @@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct paace
> > *paace,
> > u32 wnum)
> >  	return spaace;
> >  }
> >
> > +/*
> > + * Defaul PPAACE settings for an LIODN.
> > + */
> > +static void setup_default_ppaace(struct paace *ppaace) {
> > +	pamu_init_ppaace(ppaace);
> > +	/* window size is 2^(WSE+1) bytes */
> > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > +	ppaace->wbah = 0;
> > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > +		PAACE_ATM_NO_XLATE);
> > +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > +		PAACE_AP_PERMS_ALL);
> > +}
> >  /**
> >   * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves
> subwindows
> >   *                                required for primary PAACE in the
> secondary
> > @@ -253,6 +268,24 @@ static unsigned long
> > pamu_get_fspi_and_allocate(u32
> > subwin_cnt)
> >  	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct
> > paace));  }
> >
> > +/* Reset the PAACE entry to the default state */ void
> > +enable_default_dma_window(int liodn) {
> > +	struct paace *ppaace;
> > +
> > +	ppaace = pamu_get_ppaace(liodn);
> > +	if (!ppaace) {
> > +		pr_debug("Invalid liodn entry\n");
> > +		return;
> > +	}
> > +
> > +	memset(ppaace, 0, sizeof(struct paace));
> > +
> > +	setup_default_ppaace(ppaace);
> > +	mb();
> > +	pamu_enable_liodn(liodn);
> > +}
> > +
> >  /* Release the subwindows reserved for a particular LIODN */  void
> > pamu_free_subwins(int liodn)  { @@ -752,15 +785,7 @@ static void
> > __init
> > setup_liodns(void)
> >  				continue;
> >  			}
> >  			ppaace = pamu_get_ppaace(liodn);
> > -			pamu_init_ppaace(ppaace);
> > -			/* window size is 2^(WSE+1) bytes */
> > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > -			ppaace->wbah = 0;
> > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > -				PAACE_ATM_NO_XLATE);
> > -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > -				PAACE_AP_PERMS_ALL);
> > +			setup_default_ppaace(ppaace);
> >  			if (of_device_is_compatible(node, "fsl,qman-portal"))
> >  				setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
> >  			if (of_device_is_compatible(node, "fsl,qman")) diff --
> git
> > a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h index
> > 8fc1a12..0edcbbbb
> > 100644
> > --- a/drivers/iommu/fsl_pamu.h
> > +++ b/drivers/iommu/fsl_pamu.h
> > @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct device
> > *dev);  int pamu_update_paace_stash(int liodn, u32 subwin, u32 value);
> > int pamu_disable_spaace(int liodn, u32 subwin);
> >  u32 pamu_get_max_subwin_cnt(void);
> > +void enable_default_dma_window(int liodn);
> >
> >  #endif  /* __FSL_PAMU_H */
> > diff --git a/drivers/iommu/fsl_pamu_domain.c
> > b/drivers/iommu/fsl_pamu_domain.c index 966ae70..dd6cafc 100644
> > --- a/drivers/iommu/fsl_pamu_domain.c
> > +++ b/drivers/iommu/fsl_pamu_domain.c
> > @@ -340,17 +340,57 @@ static inline struct device_domain_info
> > *find_domain(struct device *dev)
> >  	return dev->archdata.iommu_domain;
> >  }
> >
> > +/* Disable device DMA capability and enable default DMA window */
> > +static void disable_device_dma(struct device_domain_info *info,
> > +				int enable_dma_window)
> > +{
> > +#ifdef CONFIG_PCI
> > +	if (info->dev->bus == &pci_bus_type) {
> > +		struct pci_dev *pdev = NULL;
> > +		pdev = to_pci_dev(info->dev);
> > +		if (pci_is_enabled(pdev))
> > +			pci_disable_device(pdev);
> > +	}
> > +#endif
> > +
> > +	if (enable_dma_window)
> > +		enable_default_dma_window(info->liodn);
> > +}
> > +
> > +static int check_for_shared_liodn(struct device_domain_info *info) {
> > +	struct device_domain_info *tmp;
> > +
> > +	/*
> > +	 * Sanity check, to ensure that this is not a
> > +	 * shared LIODN. In case of a PCIe controller
> > +	 * it's possible that all PCIe devices share
> > +	 * the same LIODN.
> > +	 */
> > +	list_for_each_entry(tmp, &info->domain->devices, link) {
> > +		if (info->liodn == tmp->liodn)
> > +			return 1;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> >  static void remove_device_ref(struct device_domain_info *info, u32
> win_cnt)  {
> >  	unsigned long flags;
> > +	int enable_dma_window = 0;
> >
> >  	list_del(&info->link);
> >  	spin_lock_irqsave(&iommu_lock, flags);
> > -	if (win_cnt > 1)
> > -		pamu_free_subwins(info->liodn);
> > -	pamu_disable_liodn(info->liodn);
> > +	if (!check_for_shared_liodn(info)) {
> 
> One query; Do we really need to check for this?
> 
[Sethi Varun-B16395] Yes, just a sanity check to ensure that there are no more devices linked to this LIODN and we can disable it.

-Varun

> Otherwise this patch series looks good to me.
> 
> Thanks
> -Bharat
> 
> > +		if (win_cnt > 1)
> > +			pamu_free_subwins(info->liodn);
> > +		pamu_disable_liodn(info->liodn);
> > +		enable_dma_window = 1;
> > +	}
> >  	spin_unlock_irqrestore(&iommu_lock, flags);
> >  	spin_lock_irqsave(&device_domain_lock, flags);
> > +	disable_device_dma(info, enable_dma_window);
> >  	info->dev->archdata.iommu_domain = NULL;
> >  	kmem_cache_free(iommu_devinfo_cache, info);
> >  	spin_unlock_irqrestore(&device_domain_lock, flags);
> > --
> > 1.7.9.5

RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Bhushan Bharat-R65777]

> >
> >
> > > -----Original Message-----
> > > From: Sethi Varun-B16395
> > > Sent: Wednesday, October 16, 2013 4:53 PM
> > > To: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linuxppc-
> > > dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder
> > > Stuart-B08248; Wood Scott-B07421; alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org;
> > > Bhushan
> > > Bharat-R65777
> > > Cc: Sethi Varun-B16395
> > > Subject: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for
> > > PCIe devices
> > >
> > > Once the PCIe device assigned to a guest VM (via VFIO) gets detached
> > > from the iommu domain (when guest terminates), its PAMU table entry
> > > is disabled. So, this would prevent the device from being used once
> > > it's
> > assigned back to the host.
> > >
> > > This patch allows for creation of a default DMA window corresponding
> > > to the device and subsequently enabling the PAMU table entry. Before
> > > we enable the entry, we ensure that the device's bus master
> > > capability is disabled (device quiesced).
> > >
> > > Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > > ---
> > >  drivers/iommu/fsl_pamu.c        |   43 ++++++++++++++++++++++++++++---
> > -----
> > >  drivers/iommu/fsl_pamu.h        |    1 +
> > >  drivers/iommu/fsl_pamu_domain.c |   46
> > ++++++++++++++++++++++++++++++++++++---
> > >  3 files changed, 78 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
> > > index
> > > cba0498..fb4a031 100644
> > > --- a/drivers/iommu/fsl_pamu.c
> > > +++ b/drivers/iommu/fsl_pamu.c
> > > @@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct
> > > paace *paace,
> > > u32 wnum)
> > >  	return spaace;
> > >  }
> > >
> > > +/*
> > > + * Defaul PPAACE settings for an LIODN.
> > > + */
> > > +static void setup_default_ppaace(struct paace *ppaace) {
> > > +	pamu_init_ppaace(ppaace);
> > > +	/* window size is 2^(WSE+1) bytes */
> > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > > +	ppaace->wbah = 0;
> > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > > +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > +		PAACE_ATM_NO_XLATE);
> > > +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > +		PAACE_AP_PERMS_ALL);
> > > +}
> > >  /**
> > >   * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves
> > subwindows
> > >   *                                required for primary PAACE in the
> > secondary
> > > @@ -253,6 +268,24 @@ static unsigned long
> > > pamu_get_fspi_and_allocate(u32
> > > subwin_cnt)
> > >  	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct
> > > paace));  }
> > >
> > > +/* Reset the PAACE entry to the default state */ void
> > > +enable_default_dma_window(int liodn) {
> > > +	struct paace *ppaace;
> > > +
> > > +	ppaace = pamu_get_ppaace(liodn);
> > > +	if (!ppaace) {
> > > +		pr_debug("Invalid liodn entry\n");
> > > +		return;
> > > +	}
> > > +
> > > +	memset(ppaace, 0, sizeof(struct paace));
> > > +
> > > +	setup_default_ppaace(ppaace);
> > > +	mb();
> > > +	pamu_enable_liodn(liodn);
> > > +}
> > > +
> > >  /* Release the subwindows reserved for a particular LIODN */  void
> > > pamu_free_subwins(int liodn)  { @@ -752,15 +785,7 @@ static void
> > > __init
> > > setup_liodns(void)
> > >  				continue;
> > >  			}
> > >  			ppaace = pamu_get_ppaace(liodn);
> > > -			pamu_init_ppaace(ppaace);
> > > -			/* window size is 2^(WSE+1) bytes */
> > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > > -			ppaace->wbah = 0;
> > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > > -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > -				PAACE_ATM_NO_XLATE);
> > > -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > -				PAACE_AP_PERMS_ALL);
> > > +			setup_default_ppaace(ppaace);
> > >  			if (of_device_is_compatible(node, "fsl,qman-portal"))
> > >  				setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
> > >  			if (of_device_is_compatible(node, "fsl,qman")) diff --
> > git
> > > a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h index
> > > 8fc1a12..0edcbbbb
> > > 100644
> > > --- a/drivers/iommu/fsl_pamu.h
> > > +++ b/drivers/iommu/fsl_pamu.h
> > > @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct device
> > > *dev);  int pamu_update_paace_stash(int liodn, u32 subwin, u32
> > > value); int pamu_disable_spaace(int liodn, u32 subwin);
> > >  u32 pamu_get_max_subwin_cnt(void);
> > > +void enable_default_dma_window(int liodn);
> > >
> > >  #endif  /* __FSL_PAMU_H */
> > > diff --git a/drivers/iommu/fsl_pamu_domain.c
> > > b/drivers/iommu/fsl_pamu_domain.c index 966ae70..dd6cafc 100644
> > > --- a/drivers/iommu/fsl_pamu_domain.c
> > > +++ b/drivers/iommu/fsl_pamu_domain.c
> > > @@ -340,17 +340,57 @@ static inline struct device_domain_info
> > > *find_domain(struct device *dev)
> > >  	return dev->archdata.iommu_domain;  }
> > >
> > > +/* Disable device DMA capability and enable default DMA window */
> > > +static void disable_device_dma(struct device_domain_info *info,
> > > +				int enable_dma_window)
> > > +{
> > > +#ifdef CONFIG_PCI
> > > +	if (info->dev->bus == &pci_bus_type) {
> > > +		struct pci_dev *pdev = NULL;
> > > +		pdev = to_pci_dev(info->dev);
> > > +		if (pci_is_enabled(pdev))
> > > +			pci_disable_device(pdev);
> > > +	}
> > > +#endif
> > > +
> > > +	if (enable_dma_window)
> > > +		enable_default_dma_window(info->liodn);
> > > +}
> > > +
> > > +static int check_for_shared_liodn(struct device_domain_info *info) {
> > > +	struct device_domain_info *tmp;
> > > +
> > > +	/*
> > > +	 * Sanity check, to ensure that this is not a
> > > +	 * shared LIODN. In case of a PCIe controller
> > > +	 * it's possible that all PCIe devices share
> > > +	 * the same LIODN.
> > > +	 */
> > > +	list_for_each_entry(tmp, &info->domain->devices, link) {
> > > +		if (info->liodn == tmp->liodn)
> > > +			return 1;
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > >  static void remove_device_ref(struct device_domain_info *info, u32
> > win_cnt)  {
> > >  	unsigned long flags;
> > > +	int enable_dma_window = 0;
> > >
> > >  	list_del(&info->link);
> > >  	spin_lock_irqsave(&iommu_lock, flags);
> > > -	if (win_cnt > 1)
> > > -		pamu_free_subwins(info->liodn);
> > > -	pamu_disable_liodn(info->liodn);
> > > +	if (!check_for_shared_liodn(info)) {
> >
> > One query; Do we really need to check for this?
> >
> [Sethi Varun-B16395] Yes, just a sanity check to ensure that there are no more
> devices linked to this LIODN and we can disable it.

Varun, trying to understand this; say there are two device under a PCI controller which share the LIODN of PCI controller,
So both of the device must be unbound from kernel driver and then bind both to VFIO.

Now when guest terminated then remove_device_ref() will be called for both of device but the sanity check will pass for the one which will be called later, is this right? 

Thanks
-Bharat


> 
> -Varun
> 
> > Otherwise this patch series looks good to me.
> >
> > Thanks
> > -Bharat
> >
> > > +		if (win_cnt > 1)
> > > +			pamu_free_subwins(info->liodn);
> > > +		pamu_disable_liodn(info->liodn);
> > > +		enable_dma_window = 1;
> > > +	}
> > >  	spin_unlock_irqrestore(&iommu_lock, flags);
> > >  	spin_lock_irqsave(&device_domain_lock, flags);
> > > +	disable_device_dma(info, enable_dma_window);
> > >  	info->dev->archdata.iommu_domain = NULL;
> > >  	kmem_cache_free(iommu_devinfo_cache, info);
> > >  	spin_unlock_irqrestore(&device_domain_lock, flags);
> > > --
> > > 1.7.9.5

RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Sethi Varun-B16395]

> -----Original Message-----
> From: Bhushan Bharat-R65777
> Sent: Wednesday, October 16, 2013 10:43 PM
> To: Sethi Varun-B16395; joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs/ROKNJybVBZg@public.gmane.org
> foundation.org; linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-
> kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder Stuart-B08248; Wood Scott-B07421;
> alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
> Subject: RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe
> devices
> 
> 
> 
> > >
> > >
> > > > -----Original Message-----
> > > > From: Sethi Varun-B16395
> > > > Sent: Wednesday, October 16, 2013 4:53 PM
> > > > To: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linuxppc-
> > > > dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder
> > > > Stuart-B08248; Wood Scott-B07421; alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org;
> > > > Bhushan
> > > > Bharat-R65777
> > > > Cc: Sethi Varun-B16395
> > > > Subject: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for
> > > > PCIe devices
> > > >
> > > > Once the PCIe device assigned to a guest VM (via VFIO) gets
> > > > detached from the iommu domain (when guest terminates), its PAMU
> > > > table entry is disabled. So, this would prevent the device from
> > > > being used once it's
> > > assigned back to the host.
> > > >
> > > > This patch allows for creation of a default DMA window
> > > > corresponding to the device and subsequently enabling the PAMU
> > > > table entry. Before we enable the entry, we ensure that the
> > > > device's bus master capability is disabled (device quiesced).
> > > >
> > > > Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > > > ---
> > > >  drivers/iommu/fsl_pamu.c        |   43
> ++++++++++++++++++++++++++++---
> > > -----
> > > >  drivers/iommu/fsl_pamu.h        |    1 +
> > > >  drivers/iommu/fsl_pamu_domain.c |   46
> > > ++++++++++++++++++++++++++++++++++++---
> > > >  3 files changed, 78 insertions(+), 12 deletions(-)
> > > >
> > > > diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
> > > > index
> > > > cba0498..fb4a031 100644
> > > > --- a/drivers/iommu/fsl_pamu.c
> > > > +++ b/drivers/iommu/fsl_pamu.c
> > > > @@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct
> > > > paace *paace,
> > > > u32 wnum)
> > > >  	return spaace;
> > > >  }
> > > >
> > > > +/*
> > > > + * Defaul PPAACE settings for an LIODN.
> > > > + */
> > > > +static void setup_default_ppaace(struct paace *ppaace) {
> > > > +	pamu_init_ppaace(ppaace);
> > > > +	/* window size is 2^(WSE+1) bytes */
> > > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > > > +	ppaace->wbah = 0;
> > > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > > > +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > > +		PAACE_ATM_NO_XLATE);
> > > > +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > > +		PAACE_AP_PERMS_ALL);
> > > > +}
> > > >  /**
> > > >   * pamu_get_fspi_and_allocate() - Allocates fspi index and
> > > > reserves
> > > subwindows
> > > >   *                                required for primary PAACE in
> the
> > > secondary
> > > > @@ -253,6 +268,24 @@ static unsigned long
> > > > pamu_get_fspi_and_allocate(u32
> > > > subwin_cnt)
> > > >  	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct
> > > > paace));  }
> > > >
> > > > +/* Reset the PAACE entry to the default state */ void
> > > > +enable_default_dma_window(int liodn) {
> > > > +	struct paace *ppaace;
> > > > +
> > > > +	ppaace = pamu_get_ppaace(liodn);
> > > > +	if (!ppaace) {
> > > > +		pr_debug("Invalid liodn entry\n");
> > > > +		return;
> > > > +	}
> > > > +
> > > > +	memset(ppaace, 0, sizeof(struct paace));
> > > > +
> > > > +	setup_default_ppaace(ppaace);
> > > > +	mb();
> > > > +	pamu_enable_liodn(liodn);
> > > > +}
> > > > +
> > > >  /* Release the subwindows reserved for a particular LIODN */
> > > > void pamu_free_subwins(int liodn)  { @@ -752,15 +785,7 @@ static
> > > > void __init
> > > > setup_liodns(void)
> > > >  				continue;
> > > >  			}
> > > >  			ppaace = pamu_get_ppaace(liodn);
> > > > -			pamu_init_ppaace(ppaace);
> > > > -			/* window size is 2^(WSE+1) bytes */
> > > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE,
> 35);
> > > > -			ppaace->wbah = 0;
> > > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL,
> 0);
> > > > -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > > -				PAACE_ATM_NO_XLATE);
> > > > -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > > -				PAACE_AP_PERMS_ALL);
> > > > +			setup_default_ppaace(ppaace);
> > > >  			if (of_device_is_compatible(node, "fsl,qman-
> portal"))
> > > >  				setup_qbman_paace(ppaace,
> QMAN_PORTAL_PAACE);
> > > >  			if (of_device_is_compatible(node, "fsl,qman"))
> diff --
> > > git
> > > > a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h index
> > > > 8fc1a12..0edcbbbb
> > > > 100644
> > > > --- a/drivers/iommu/fsl_pamu.h
> > > > +++ b/drivers/iommu/fsl_pamu.h
> > > > @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct
> > > > device *dev);  int pamu_update_paace_stash(int liodn, u32 subwin,
> > > > u32 value); int pamu_disable_spaace(int liodn, u32 subwin);
> > > >  u32 pamu_get_max_subwin_cnt(void);
> > > > +void enable_default_dma_window(int liodn);
> > > >
> > > >  #endif  /* __FSL_PAMU_H */
> > > > diff --git a/drivers/iommu/fsl_pamu_domain.c
> > > > b/drivers/iommu/fsl_pamu_domain.c index 966ae70..dd6cafc 100644
> > > > --- a/drivers/iommu/fsl_pamu_domain.c
> > > > +++ b/drivers/iommu/fsl_pamu_domain.c
> > > > @@ -340,17 +340,57 @@ static inline struct device_domain_info
> > > > *find_domain(struct device *dev)
> > > >  	return dev->archdata.iommu_domain;  }
> > > >
> > > > +/* Disable device DMA capability and enable default DMA window */
> > > > +static void disable_device_dma(struct device_domain_info *info,
> > > > +				int enable_dma_window)
> > > > +{
> > > > +#ifdef CONFIG_PCI
> > > > +	if (info->dev->bus == &pci_bus_type) {
> > > > +		struct pci_dev *pdev = NULL;
> > > > +		pdev = to_pci_dev(info->dev);
> > > > +		if (pci_is_enabled(pdev))
> > > > +			pci_disable_device(pdev);
> > > > +	}
> > > > +#endif
> > > > +
> > > > +	if (enable_dma_window)
> > > > +		enable_default_dma_window(info->liodn);
> > > > +}
> > > > +
> > > > +static int check_for_shared_liodn(struct device_domain_info *info)
> {
> > > > +	struct device_domain_info *tmp;
> > > > +
> > > > +	/*
> > > > +	 * Sanity check, to ensure that this is not a
> > > > +	 * shared LIODN. In case of a PCIe controller
> > > > +	 * it's possible that all PCIe devices share
> > > > +	 * the same LIODN.
> > > > +	 */
> > > > +	list_for_each_entry(tmp, &info->domain->devices, link) {
> > > > +		if (info->liodn == tmp->liodn)
> > > > +			return 1;
> > > > +	}
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > >  static void remove_device_ref(struct device_domain_info *info,
> > > > u32
> > > win_cnt)  {
> > > >  	unsigned long flags;
> > > > +	int enable_dma_window = 0;
> > > >
> > > >  	list_del(&info->link);
> > > >  	spin_lock_irqsave(&iommu_lock, flags);
> > > > -	if (win_cnt > 1)
> > > > -		pamu_free_subwins(info->liodn);
> > > > -	pamu_disable_liodn(info->liodn);
> > > > +	if (!check_for_shared_liodn(info)) {
> > >
> > > One query; Do we really need to check for this?
> > >
> > [Sethi Varun-B16395] Yes, just a sanity check to ensure that there are
> > no more devices linked to this LIODN and we can disable it.
> 
> Varun, trying to understand this; say there are two device under a PCI
> controller which share the LIODN of PCI controller, So both of the device
> must be unbound from kernel driver and then bind both to VFIO.
> 
> Now when guest terminated then remove_device_ref() will be called for
> both of device but the sanity check will pass for the one which will be
> called later, is this right?
> 
Yes, when the first device is detached PAMU LIODN table entry is not disabled. The LIODN would only be disabled once all devices are detached.

-Varun

RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Bhushan Bharat-R65777]

> >
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Sethi Varun-B16395
> > > > > Sent: Wednesday, October 16, 2013 4:53 PM
> > > > > To: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linuxppc-
> > > > > dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder
> > > > > Stuart-B08248; Wood Scott-B07421; alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org;
> > > > > Bhushan
> > > > > Bharat-R65777
> > > > > Cc: Sethi Varun-B16395
> > > > > Subject: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for
> > > > > PCIe devices
> > > > >
> > > > > Once the PCIe device assigned to a guest VM (via VFIO) gets
> > > > > detached from the iommu domain (when guest terminates), its PAMU
> > > > > table entry is disabled. So, this would prevent the device from
> > > > > being used once it's
> > > > assigned back to the host.
> > > > >
> > > > > This patch allows for creation of a default DMA window
> > > > > corresponding to the device and subsequently enabling the PAMU
> > > > > table entry. Before we enable the entry, we ensure that the
> > > > > device's bus master capability is disabled (device quiesced).
> > > > >
> > > > > Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > > > > ---
> > > > >  drivers/iommu/fsl_pamu.c        |   43
> > ++++++++++++++++++++++++++++---
> > > > -----
> > > > >  drivers/iommu/fsl_pamu.h        |    1 +
> > > > >  drivers/iommu/fsl_pamu_domain.c |   46
> > > > ++++++++++++++++++++++++++++++++++++---
> > > > >  3 files changed, 78 insertions(+), 12 deletions(-)
> > > > >
> > > > > diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
> > > > > index
> > > > > cba0498..fb4a031 100644
> > > > > --- a/drivers/iommu/fsl_pamu.c
> > > > > +++ b/drivers/iommu/fsl_pamu.c
> > > > > @@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct
> > > > > paace *paace,
> > > > > u32 wnum)
> > > > >  	return spaace;
> > > > >  }
> > > > >
> > > > > +/*
> > > > > + * Defaul PPAACE settings for an LIODN.
> > > > > + */
> > > > > +static void setup_default_ppaace(struct paace *ppaace) {
> > > > > +	pamu_init_ppaace(ppaace);
> > > > > +	/* window size is 2^(WSE+1) bytes */
> > > > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > > > > +	ppaace->wbah = 0;
> > > > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > > > > +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > > > +		PAACE_ATM_NO_XLATE);
> > > > > +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > > > +		PAACE_AP_PERMS_ALL);
> > > > > +}
> > > > >  /**
> > > > >   * pamu_get_fspi_and_allocate() - Allocates fspi index and
> > > > > reserves
> > > > subwindows
> > > > >   *                                required for primary PAACE in
> > the
> > > > secondary
> > > > > @@ -253,6 +268,24 @@ static unsigned long
> > > > > pamu_get_fspi_and_allocate(u32
> > > > > subwin_cnt)
> > > > >  	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct
> > > > > paace));  }
> > > > >
> > > > > +/* Reset the PAACE entry to the default state */ void
> > > > > +enable_default_dma_window(int liodn) {
> > > > > +	struct paace *ppaace;
> > > > > +
> > > > > +	ppaace = pamu_get_ppaace(liodn);
> > > > > +	if (!ppaace) {
> > > > > +		pr_debug("Invalid liodn entry\n");
> > > > > +		return;
> > > > > +	}
> > > > > +
> > > > > +	memset(ppaace, 0, sizeof(struct paace));
> > > > > +
> > > > > +	setup_default_ppaace(ppaace);
> > > > > +	mb();
> > > > > +	pamu_enable_liodn(liodn);
> > > > > +}
> > > > > +
> > > > >  /* Release the subwindows reserved for a particular LIODN */
> > > > > void pamu_free_subwins(int liodn)  { @@ -752,15 +785,7 @@ static
> > > > > void __init
> > > > > setup_liodns(void)
> > > > >  				continue;
> > > > >  			}
> > > > >  			ppaace = pamu_get_ppaace(liodn);
> > > > > -			pamu_init_ppaace(ppaace);
> > > > > -			/* window size is 2^(WSE+1) bytes */
> > > > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE,
> > 35);
> > > > > -			ppaace->wbah = 0;
> > > > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL,
> > 0);
> > > > > -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > > > -				PAACE_ATM_NO_XLATE);
> > > > > -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > > > -				PAACE_AP_PERMS_ALL);
> > > > > +			setup_default_ppaace(ppaace);
> > > > >  			if (of_device_is_compatible(node, "fsl,qman-
> > portal"))
> > > > >  				setup_qbman_paace(ppaace,
> > QMAN_PORTAL_PAACE);
> > > > >  			if (of_device_is_compatible(node, "fsl,qman"))
> > diff --
> > > > git
> > > > > a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h index
> > > > > 8fc1a12..0edcbbbb
> > > > > 100644
> > > > > --- a/drivers/iommu/fsl_pamu.h
> > > > > +++ b/drivers/iommu/fsl_pamu.h
> > > > > @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct
> > > > > device *dev);  int pamu_update_paace_stash(int liodn, u32
> > > > > subwin,
> > > > > u32 value); int pamu_disable_spaace(int liodn, u32 subwin);
> > > > >  u32 pamu_get_max_subwin_cnt(void);
> > > > > +void enable_default_dma_window(int liodn);
> > > > >
> > > > >  #endif  /* __FSL_PAMU_H */
> > > > > diff --git a/drivers/iommu/fsl_pamu_domain.c
> > > > > b/drivers/iommu/fsl_pamu_domain.c index 966ae70..dd6cafc 100644
> > > > > --- a/drivers/iommu/fsl_pamu_domain.c
> > > > > +++ b/drivers/iommu/fsl_pamu_domain.c
> > > > > @@ -340,17 +340,57 @@ static inline struct device_domain_info
> > > > > *find_domain(struct device *dev)
> > > > >  	return dev->archdata.iommu_domain;  }
> > > > >
> > > > > +/* Disable device DMA capability and enable default DMA window
> > > > > +*/ static void disable_device_dma(struct device_domain_info *info,
> > > > > +				int enable_dma_window)
> > > > > +{
> > > > > +#ifdef CONFIG_PCI
> > > > > +	if (info->dev->bus == &pci_bus_type) {
> > > > > +		struct pci_dev *pdev = NULL;
> > > > > +		pdev = to_pci_dev(info->dev);
> > > > > +		if (pci_is_enabled(pdev))
> > > > > +			pci_disable_device(pdev);
> > > > > +	}
> > > > > +#endif
> > > > > +
> > > > > +	if (enable_dma_window)
> > > > > +		enable_default_dma_window(info->liodn);
> > > > > +}
> > > > > +
> > > > > +static int check_for_shared_liodn(struct device_domain_info
> > > > > +*info)
> > {
> > > > > +	struct device_domain_info *tmp;
> > > > > +
> > > > > +	/*
> > > > > +	 * Sanity check, to ensure that this is not a
> > > > > +	 * shared LIODN. In case of a PCIe controller
> > > > > +	 * it's possible that all PCIe devices share
> > > > > +	 * the same LIODN.
> > > > > +	 */
> > > > > +	list_for_each_entry(tmp, &info->domain->devices, link) {
> > > > > +		if (info->liodn == tmp->liodn)
> > > > > +			return 1;
> > > > > +	}
> > > > > +
> > > > > +	return 0;
> > > > > +}
> > > > > +
> > > > >  static void remove_device_ref(struct device_domain_info *info,
> > > > > u32
> > > > win_cnt)  {
> > > > >  	unsigned long flags;
> > > > > +	int enable_dma_window = 0;
> > > > >
> > > > >  	list_del(&info->link);
> > > > >  	spin_lock_irqsave(&iommu_lock, flags);
> > > > > -	if (win_cnt > 1)
> > > > > -		pamu_free_subwins(info->liodn);
> > > > > -	pamu_disable_liodn(info->liodn);
> > > > > +	if (!check_for_shared_liodn(info)) {
> > > >
> > > > One query; Do we really need to check for this?
> > > >
> > > [Sethi Varun-B16395] Yes, just a sanity check to ensure that there
> > > are no more devices linked to this LIODN and we can disable it.
> >
> > Varun, trying to understand this; say there are two device under a PCI
> > controller which share the LIODN of PCI controller, So both of the
> > device must be unbound from kernel driver and then bind both to VFIO.
> >
> > Now when guest terminated then remove_device_ref() will be called for
> > both of device but the sanity check will pass for the one which will
> > be called later, is this right?
> >
> Yes, when the first device is detached PAMU LIODN table entry is not disabled.
> The LIODN would only be disabled once all devices are detached.

Ok, thanks for clarification

Patch series looks good to me.

> 
> -Varun

RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Sethi Varun-B16395]

> -----Original Message-----
> From: Bhushan Bharat-R65777
> Sent: Wednesday, October 16, 2013 10:52 PM
> To: Sethi Varun-B16395; joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs/ROKNJybVBZg@public.gmane.org
> foundation.org; linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-
> kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder Stuart-B08248; Wood Scott-B07421;
> alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
> Subject: RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe
> devices
> 
> 
> > >
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Sethi Varun-B16395
> > > > > > Sent: Wednesday, October 16, 2013 4:53 PM
> > > > > > To: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org;
> > > > > > linuxppc- dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;
> > > > > > Yoder Stuart-B08248; Wood Scott-B07421;
> > > > > > alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org; Bhushan
> > > > > > Bharat-R65777
> > > > > > Cc: Sethi Varun-B16395
> > > > > > Subject: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window
> > > > > > for PCIe devices
> > > > > >
> > > > > > Once the PCIe device assigned to a guest VM (via VFIO) gets
> > > > > > detached from the iommu domain (when guest terminates), its
> > > > > > PAMU table entry is disabled. So, this would prevent the
> > > > > > device from being used once it's
> > > > > assigned back to the host.
> > > > > >
> > > > > > This patch allows for creation of a default DMA window
> > > > > > corresponding to the device and subsequently enabling the PAMU
> > > > > > table entry. Before we enable the entry, we ensure that the
> > > > > > device's bus master capability is disabled (device quiesced).
> > > > > >
> > > > > > Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > > > > > ---
> > > > > >  drivers/iommu/fsl_pamu.c        |   43
> > > ++++++++++++++++++++++++++++---
> > > > > -----
> > > > > >  drivers/iommu/fsl_pamu.h        |    1 +
> > > > > >  drivers/iommu/fsl_pamu_domain.c |   46
> > > > > ++++++++++++++++++++++++++++++++++++---
> > > > > >  3 files changed, 78 insertions(+), 12 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/iommu/fsl_pamu.c
> > > > > > b/drivers/iommu/fsl_pamu.c index
> > > > > > cba0498..fb4a031 100644
> > > > > > --- a/drivers/iommu/fsl_pamu.c
> > > > > > +++ b/drivers/iommu/fsl_pamu.c
> > > > > > @@ -225,6 +225,21 @@ static struct paace
> > > > > > *pamu_get_spaace(struct paace *paace,
> > > > > > u32 wnum)
> > > > > >  	return spaace;
> > > > > >  }
> > > > > >
> > > > > > +/*
> > > > > > + * Defaul PPAACE settings for an LIODN.
> > > > > > + */
> > > > > > +static void setup_default_ppaace(struct paace *ppaace) {
> > > > > > +	pamu_init_ppaace(ppaace);
> > > > > > +	/* window size is 2^(WSE+1) bytes */
> > > > > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > > > > > +	ppaace->wbah = 0;
> > > > > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > > > > > +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > > > > +		PAACE_ATM_NO_XLATE);
> > > > > > +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > > > > +		PAACE_AP_PERMS_ALL);
> > > > > > +}
> > > > > >  /**
> > > > > >   * pamu_get_fspi_and_allocate() - Allocates fspi index and
> > > > > > reserves
> > > > > subwindows
> > > > > >   *                                required for primary PAACE
> in
> > > the
> > > > > secondary
> > > > > > @@ -253,6 +268,24 @@ static unsigned long
> > > > > > pamu_get_fspi_and_allocate(u32
> > > > > > subwin_cnt)
> > > > > >  	return (spaace_addr - (unsigned long)spaact) /
> > > > > > (sizeof(struct paace));  }
> > > > > >
> > > > > > +/* Reset the PAACE entry to the default state */ void
> > > > > > +enable_default_dma_window(int liodn) {
> > > > > > +	struct paace *ppaace;
> > > > > > +
> > > > > > +	ppaace = pamu_get_ppaace(liodn);
> > > > > > +	if (!ppaace) {
> > > > > > +		pr_debug("Invalid liodn entry\n");
> > > > > > +		return;
> > > > > > +	}
> > > > > > +
> > > > > > +	memset(ppaace, 0, sizeof(struct paace));
> > > > > > +
> > > > > > +	setup_default_ppaace(ppaace);
> > > > > > +	mb();
> > > > > > +	pamu_enable_liodn(liodn);
> > > > > > +}
> > > > > > +
> > > > > >  /* Release the subwindows reserved for a particular LIODN */
> > > > > > void pamu_free_subwins(int liodn)  { @@ -752,15 +785,7 @@
> > > > > > static void __init
> > > > > > setup_liodns(void)
> > > > > >  				continue;
> > > > > >  			}
> > > > > >  			ppaace = pamu_get_ppaace(liodn);
> > > > > > -			pamu_init_ppaace(ppaace);
> > > > > > -			/* window size is 2^(WSE+1) bytes */
> > > > > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE,
> > > 35);
> > > > > > -			ppaace->wbah = 0;
> > > > > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL,
> > > 0);
> > > > > > -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > > > > -				PAACE_ATM_NO_XLATE);
> > > > > > -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > > > > -				PAACE_AP_PERMS_ALL);
> > > > > > +			setup_default_ppaace(ppaace);
> > > > > >  			if (of_device_is_compatible(node, "fsl,qman-
> > > portal"))
> > > > > >  				setup_qbman_paace(ppaace,
> > > QMAN_PORTAL_PAACE);
> > > > > >  			if (of_device_is_compatible(node, "fsl,qman"))
> > > diff --
> > > > > git
> > > > > > a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h index
> > > > > > 8fc1a12..0edcbbbb
> > > > > > 100644
> > > > > > --- a/drivers/iommu/fsl_pamu.h
> > > > > > +++ b/drivers/iommu/fsl_pamu.h
> > > > > > @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct
> > > > > > device *dev);  int pamu_update_paace_stash(int liodn, u32
> > > > > > subwin,
> > > > > > u32 value); int pamu_disable_spaace(int liodn, u32 subwin);
> > > > > >  u32 pamu_get_max_subwin_cnt(void);
> > > > > > +void enable_default_dma_window(int liodn);
> > > > > >
> > > > > >  #endif  /* __FSL_PAMU_H */
> > > > > > diff --git a/drivers/iommu/fsl_pamu_domain.c
> > > > > > b/drivers/iommu/fsl_pamu_domain.c index 966ae70..dd6cafc
> > > > > > 100644
> > > > > > --- a/drivers/iommu/fsl_pamu_domain.c
> > > > > > +++ b/drivers/iommu/fsl_pamu_domain.c
> > > > > > @@ -340,17 +340,57 @@ static inline struct device_domain_info
> > > > > > *find_domain(struct device *dev)
> > > > > >  	return dev->archdata.iommu_domain;  }
> > > > > >
> > > > > > +/* Disable device DMA capability and enable default DMA
> > > > > > +window */ static void disable_device_dma(struct
> device_domain_info *info,
> > > > > > +				int enable_dma_window)
> > > > > > +{
> > > > > > +#ifdef CONFIG_PCI
> > > > > > +	if (info->dev->bus == &pci_bus_type) {
> > > > > > +		struct pci_dev *pdev = NULL;
> > > > > > +		pdev = to_pci_dev(info->dev);
> > > > > > +		if (pci_is_enabled(pdev))
> > > > > > +			pci_disable_device(pdev);
> > > > > > +	}
> > > > > > +#endif
> > > > > > +
> > > > > > +	if (enable_dma_window)
> > > > > > +		enable_default_dma_window(info->liodn);
> > > > > > +}
> > > > > > +
> > > > > > +static int check_for_shared_liodn(struct device_domain_info
> > > > > > +*info)
> > > {
> > > > > > +	struct device_domain_info *tmp;
> > > > > > +
> > > > > > +	/*
> > > > > > +	 * Sanity check, to ensure that this is not a
> > > > > > +	 * shared LIODN. In case of a PCIe controller
> > > > > > +	 * it's possible that all PCIe devices share
> > > > > > +	 * the same LIODN.
> > > > > > +	 */
> > > > > > +	list_for_each_entry(tmp, &info->domain->devices, link) {
> > > > > > +		if (info->liodn == tmp->liodn)
> > > > > > +			return 1;
> > > > > > +	}
> > > > > > +
> > > > > > +	return 0;
> > > > > > +}
> > > > > > +
> > > > > >  static void remove_device_ref(struct device_domain_info
> > > > > > *info,
> > > > > > u32
> > > > > win_cnt)  {
> > > > > >  	unsigned long flags;
> > > > > > +	int enable_dma_window = 0;
> > > > > >
> > > > > >  	list_del(&info->link);
> > > > > >  	spin_lock_irqsave(&iommu_lock, flags);
> > > > > > -	if (win_cnt > 1)
> > > > > > -		pamu_free_subwins(info->liodn);
> > > > > > -	pamu_disable_liodn(info->liodn);
> > > > > > +	if (!check_for_shared_liodn(info)) {
> > > > >
> > > > > One query; Do we really need to check for this?
> > > > >
> > > > [Sethi Varun-B16395] Yes, just a sanity check to ensure that there
> > > > are no more devices linked to this LIODN and we can disable it.
> > >
> > > Varun, trying to understand this; say there are two device under a
> > > PCI controller which share the LIODN of PCI controller, So both of
> > > the device must be unbound from kernel driver and then bind both to
> VFIO.
> > >
> > > Now when guest terminated then remove_device_ref() will be called
> > > for both of device but the sanity check will pass for the one which
> > > will be called later, is this right?
> > >
> > Yes, when the first device is detached PAMU LIODN table entry is not
> disabled.
> > The LIODN would only be disabled once all devices are detached.
> 
> Ok, thanks for clarification
> 
> Patch series looks good to me.
Thanks.

-Varun

Re: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Alex Williamson]

On Wed, 2013-10-16 at 16:53 +0530, Varun Sethi wrote:
> Once the PCIe device assigned to a guest VM (via VFIO) gets detached from the iommu domain
> (when guest terminates), its PAMU table entry is disabled. So, this would prevent the device
> from being used once it's assigned back to the host.
> 
> This patch allows for creation of a default DMA window corresponding to the device
> and subsequently enabling the PAMU table entry. Before we enable the entry, we ensure that
> the device's bus master capability is disabled (device quiesced).
> 
> Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
>  drivers/iommu/fsl_pamu.c        |   43 ++++++++++++++++++++++++++++--------
>  drivers/iommu/fsl_pamu.h        |    1 +
>  drivers/iommu/fsl_pamu_domain.c |   46 ++++++++++++++++++++++++++++++++++++---
>  3 files changed, 78 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c
> index cba0498..fb4a031 100644
> --- a/drivers/iommu/fsl_pamu.c
> +++ b/drivers/iommu/fsl_pamu.c
> @@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct paace *paace, u32 wnum)
>  	return spaace;
>  }
>  
> +/*
> + * Defaul PPAACE settings for an LIODN.
> + */
> +static void setup_default_ppaace(struct paace *ppaace)
> +{
> +	pamu_init_ppaace(ppaace);
> +	/* window size is 2^(WSE+1) bytes */
> +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> +	ppaace->wbah = 0;
> +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> +		PAACE_ATM_NO_XLATE);
> +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> +		PAACE_AP_PERMS_ALL);
> +}
>  /**
>   * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves subwindows
>   *                                required for primary PAACE in the secondary
> @@ -253,6 +268,24 @@ static unsigned long pamu_get_fspi_and_allocate(u32 subwin_cnt)
>  	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct paace));
>  }
>  
> +/* Reset the PAACE entry to the default state */
> +void enable_default_dma_window(int liodn)
> +{
> +	struct paace *ppaace;
> +
> +	ppaace = pamu_get_ppaace(liodn);
> +	if (!ppaace) {
> +		pr_debug("Invalid liodn entry\n");
> +		return;
> +	}
> +
> +	memset(ppaace, 0, sizeof(struct paace));
> +
> +	setup_default_ppaace(ppaace);
> +	mb();
> +	pamu_enable_liodn(liodn);
> +}
> +
>  /* Release the subwindows reserved for a particular LIODN */
>  void pamu_free_subwins(int liodn)
>  {
> @@ -752,15 +785,7 @@ static void __init setup_liodns(void)
>  				continue;
>  			}
>  			ppaace = pamu_get_ppaace(liodn);
> -			pamu_init_ppaace(ppaace);
> -			/* window size is 2^(WSE+1) bytes */
> -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> -			ppaace->wbah = 0;
> -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> -				PAACE_ATM_NO_XLATE);
> -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> -				PAACE_AP_PERMS_ALL);
> +			setup_default_ppaace(ppaace);
>  			if (of_device_is_compatible(node, "fsl,qman-portal"))
>  				setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
>  			if (of_device_is_compatible(node, "fsl,qman"))
> diff --git a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h
> index 8fc1a12..0edcbbbb 100644
> --- a/drivers/iommu/fsl_pamu.h
> +++ b/drivers/iommu/fsl_pamu.h
> @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct device *dev);
>  int  pamu_update_paace_stash(int liodn, u32 subwin, u32 value);
>  int pamu_disable_spaace(int liodn, u32 subwin);
>  u32 pamu_get_max_subwin_cnt(void);
> +void enable_default_dma_window(int liodn);
>  
>  #endif  /* __FSL_PAMU_H */
> diff --git a/drivers/iommu/fsl_pamu_domain.c b/drivers/iommu/fsl_pamu_domain.c
> index 966ae70..dd6cafc 100644
> --- a/drivers/iommu/fsl_pamu_domain.c
> +++ b/drivers/iommu/fsl_pamu_domain.c
> @@ -340,17 +340,57 @@ static inline struct device_domain_info *find_domain(struct device *dev)
>  	return dev->archdata.iommu_domain;
>  }
>  
> +/* Disable device DMA capability and enable default DMA window */
> +static void disable_device_dma(struct device_domain_info *info,
> +				int enable_dma_window)

nit, bool?

> +{
> +#ifdef CONFIG_PCI
> +	if (info->dev->bus == &pci_bus_type) {
> +		struct pci_dev *pdev = NULL;

nit, unnecessary initialization

> +		pdev = to_pci_dev(info->dev);
> +		if (pci_is_enabled(pdev))
> +			pci_disable_device(pdev);

This looks suspicious.  What's the case where you're finding devices
where this is needed?  Logically the driver that called
pci_enable_device() should also call pci_disabled_device() when it's
done.  Maybe there's a case to be made that we can't rely on the driver,
but then maybe there should be a pr_debug/info here to notify that
somebody left the device running.  There might also be the question of
whether you should test the busmaster bit in the command register rather
than trusting these indirect paths if it's really for cleanup.  Thanks,

Alex

> +	}
> +#endif
> +
> +	if (enable_dma_window)
> +		enable_default_dma_window(info->liodn);
> +}
> +
> +static int check_for_shared_liodn(struct device_domain_info *info)
> +{
> +	struct device_domain_info *tmp;
> +
> +	/*
> +	 * Sanity check, to ensure that this is not a
> +	 * shared LIODN. In case of a PCIe controller
> +	 * it's possible that all PCIe devices share
> +	 * the same LIODN.
> +	 */
> +	list_for_each_entry(tmp, &info->domain->devices, link) {
> +		if (info->liodn == tmp->liodn)
> +			return 1;
> +	}
> +
> +	return 0;
> +}
> +
>  static void remove_device_ref(struct device_domain_info *info, u32 win_cnt)
>  {
>  	unsigned long flags;
> +	int enable_dma_window = 0;
>  
>  	list_del(&info->link);
>  	spin_lock_irqsave(&iommu_lock, flags);
> -	if (win_cnt > 1)
> -		pamu_free_subwins(info->liodn);
> -	pamu_disable_liodn(info->liodn);
> +	if (!check_for_shared_liodn(info)) {
> +		if (win_cnt > 1)
> +			pamu_free_subwins(info->liodn);
> +		pamu_disable_liodn(info->liodn);
> +		enable_dma_window = 1;
> +	}
>  	spin_unlock_irqrestore(&iommu_lock, flags);
>  	spin_lock_irqsave(&device_domain_lock, flags);
> +	disable_device_dma(info, enable_dma_window);
>  	info->dev->archdata.iommu_domain = NULL;
>  	kmem_cache_free(iommu_devinfo_cache, info);
>  	spin_unlock_irqrestore(&device_domain_lock, flags);

RE: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Varun Sethi]

> -----Original Message-----
> From: Alex Williamson [mailto:alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org]
> Sent: Tuesday, December 03, 2013 3:04 AM
> To: Sethi Varun-B16395
> Cc: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linuxppc-
> dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder Stuart-B08248;
> Wood Scott-B07421; Bhushan Bharat-R65777
> Subject: Re: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe
> devices
> 
> On Wed, 2013-10-16 at 16:53 +0530, Varun Sethi wrote:
> > Once the PCIe device assigned to a guest VM (via VFIO) gets detached
> > from the iommu domain (when guest terminates), its PAMU table entry is
> > disabled. So, this would prevent the device from being used once it's
> assigned back to the host.
> >
> > This patch allows for creation of a default DMA window corresponding
> > to the device and subsequently enabling the PAMU table entry. Before
> > we enable the entry, we ensure that the device's bus master capability
> is disabled (device quiesced).
> >
> > Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > ---
> >  drivers/iommu/fsl_pamu.c        |   43 ++++++++++++++++++++++++++++---
> -----
> >  drivers/iommu/fsl_pamu.h        |    1 +
> >  drivers/iommu/fsl_pamu_domain.c |   46
> ++++++++++++++++++++++++++++++++++++---
> >  3 files changed, 78 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c index
> > cba0498..fb4a031 100644
> > --- a/drivers/iommu/fsl_pamu.c
> > +++ b/drivers/iommu/fsl_pamu.c
> > @@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct paace
> *paace, u32 wnum)
> >  	return spaace;
> >  }
> >
> > +/*
> > + * Defaul PPAACE settings for an LIODN.
> > + */
> > +static void setup_default_ppaace(struct paace *ppaace) {
> > +	pamu_init_ppaace(ppaace);
> > +	/* window size is 2^(WSE+1) bytes */
> > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > +	ppaace->wbah = 0;
> > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > +		PAACE_ATM_NO_XLATE);
> > +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > +		PAACE_AP_PERMS_ALL);
> > +}
> >  /**
> >   * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves
> subwindows
> >   *                                required for primary PAACE in the
> secondary
> > @@ -253,6 +268,24 @@ static unsigned long
> pamu_get_fspi_and_allocate(u32 subwin_cnt)
> >  	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct
> > paace));  }
> >
> > +/* Reset the PAACE entry to the default state */ void
> > +enable_default_dma_window(int liodn) {
> > +	struct paace *ppaace;
> > +
> > +	ppaace = pamu_get_ppaace(liodn);
> > +	if (!ppaace) {
> > +		pr_debug("Invalid liodn entry\n");
> > +		return;
> > +	}
> > +
> > +	memset(ppaace, 0, sizeof(struct paace));
> > +
> > +	setup_default_ppaace(ppaace);
> > +	mb();
> > +	pamu_enable_liodn(liodn);
> > +}
> > +
> >  /* Release the subwindows reserved for a particular LIODN */  void
> > pamu_free_subwins(int liodn)  { @@ -752,15 +785,7 @@ static void
> > __init setup_liodns(void)
> >  				continue;
> >  			}
> >  			ppaace = pamu_get_ppaace(liodn);
> > -			pamu_init_ppaace(ppaace);
> > -			/* window size is 2^(WSE+1) bytes */
> > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > -			ppaace->wbah = 0;
> > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > -				PAACE_ATM_NO_XLATE);
> > -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > -				PAACE_AP_PERMS_ALL);
> > +			setup_default_ppaace(ppaace);
> >  			if (of_device_is_compatible(node, "fsl,qman-portal"))
> >  				setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
> >  			if (of_device_is_compatible(node, "fsl,qman")) diff --
> git
> > a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h index
> > 8fc1a12..0edcbbbb 100644
> > --- a/drivers/iommu/fsl_pamu.h
> > +++ b/drivers/iommu/fsl_pamu.h
> > @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct device
> > *dev);  int  pamu_update_paace_stash(int liodn, u32 subwin, u32
> > value);  int pamu_disable_spaace(int liodn, u32 subwin);
> >  u32 pamu_get_max_subwin_cnt(void);
> > +void enable_default_dma_window(int liodn);
> >
> >  #endif  /* __FSL_PAMU_H */
> > diff --git a/drivers/iommu/fsl_pamu_domain.c
> > b/drivers/iommu/fsl_pamu_domain.c index 966ae70..dd6cafc 100644
> > --- a/drivers/iommu/fsl_pamu_domain.c
> > +++ b/drivers/iommu/fsl_pamu_domain.c
> > @@ -340,17 +340,57 @@ static inline struct device_domain_info
> *find_domain(struct device *dev)
> >  	return dev->archdata.iommu_domain;
> >  }
> >
> > +/* Disable device DMA capability and enable default DMA window */
> > +static void disable_device_dma(struct device_domain_info *info,
> > +				int enable_dma_window)
> 
> nit, bool?
> 
> > +{
> > +#ifdef CONFIG_PCI
> > +	if (info->dev->bus == &pci_bus_type) {
> > +		struct pci_dev *pdev = NULL;
> 
> nit, unnecessary initialization
> 
> > +		pdev = to_pci_dev(info->dev);
> > +		if (pci_is_enabled(pdev))
> > +			pci_disable_device(pdev);
> 
> This looks suspicious.  What's the case where you're finding devices
> where this is needed?  Logically the driver that called
> pci_enable_device() should also call pci_disabled_device() when it's
> done.  Maybe there's a case to be made that we can't rely on the driver,
> but then maybe there should be a pr_debug/info here to notify that
> somebody left the device running.  There might also be the question of
> whether you should test the busmaster bit in the command register rather
> than trusting these indirect paths if it's really for cleanup.  Thanks,
> 
Once the device is detached from the domain, we enable a default DMA window for the device. Before enabling the default window, I want to ensure that device DMA is disabled. VFIO subsystem handles this for vfio-pci. But, can we assume that this would always be the case?

-Varun

Re: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe devices

[Alex Williamson]

On Tue, 2013-12-03 at 18:15 +0000, Varun Sethi wrote:
> 
> > -----Original Message-----
> > From: Alex Williamson [mailto:alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org]
> > Sent: Tuesday, December 03, 2013 3:04 AM
> > To: Sethi Varun-B16395
> > Cc: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linuxppc-
> > dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder Stuart-B08248;
> > Wood Scott-B07421; Bhushan Bharat-R65777
> > Subject: Re: [PATCH 2/3 v2] iommu/fsl: Enable default DMA window for PCIe
> > devices
> > 
> > On Wed, 2013-10-16 at 16:53 +0530, Varun Sethi wrote:
> > > Once the PCIe device assigned to a guest VM (via VFIO) gets detached
> > > from the iommu domain (when guest terminates), its PAMU table entry is
> > > disabled. So, this would prevent the device from being used once it's
> > assigned back to the host.
> > >
> > > This patch allows for creation of a default DMA window corresponding
> > > to the device and subsequently enabling the PAMU table entry. Before
> > > we enable the entry, we ensure that the device's bus master capability
> > is disabled (device quiesced).
> > >
> > > Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > > ---
> > >  drivers/iommu/fsl_pamu.c        |   43 ++++++++++++++++++++++++++++---
> > -----
> > >  drivers/iommu/fsl_pamu.h        |    1 +
> > >  drivers/iommu/fsl_pamu_domain.c |   46
> > ++++++++++++++++++++++++++++++++++++---
> > >  3 files changed, 78 insertions(+), 12 deletions(-)
> > >
> > > diff --git a/drivers/iommu/fsl_pamu.c b/drivers/iommu/fsl_pamu.c index
> > > cba0498..fb4a031 100644
> > > --- a/drivers/iommu/fsl_pamu.c
> > > +++ b/drivers/iommu/fsl_pamu.c
> > > @@ -225,6 +225,21 @@ static struct paace *pamu_get_spaace(struct paace
> > *paace, u32 wnum)
> > >  	return spaace;
> > >  }
> > >
> > > +/*
> > > + * Defaul PPAACE settings for an LIODN.
> > > + */
> > > +static void setup_default_ppaace(struct paace *ppaace) {
> > > +	pamu_init_ppaace(ppaace);
> > > +	/* window size is 2^(WSE+1) bytes */
> > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > > +	ppaace->wbah = 0;
> > > +	set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > > +	set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > +		PAACE_ATM_NO_XLATE);
> > > +	set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > +		PAACE_AP_PERMS_ALL);
> > > +}
> > >  /**
> > >   * pamu_get_fspi_and_allocate() - Allocates fspi index and reserves
> > subwindows
> > >   *                                required for primary PAACE in the
> > secondary
> > > @@ -253,6 +268,24 @@ static unsigned long
> > pamu_get_fspi_and_allocate(u32 subwin_cnt)
> > >  	return (spaace_addr - (unsigned long)spaact) / (sizeof(struct
> > > paace));  }
> > >
> > > +/* Reset the PAACE entry to the default state */ void
> > > +enable_default_dma_window(int liodn) {
> > > +	struct paace *ppaace;
> > > +
> > > +	ppaace = pamu_get_ppaace(liodn);
> > > +	if (!ppaace) {
> > > +		pr_debug("Invalid liodn entry\n");
> > > +		return;
> > > +	}
> > > +
> > > +	memset(ppaace, 0, sizeof(struct paace));
> > > +
> > > +	setup_default_ppaace(ppaace);
> > > +	mb();
> > > +	pamu_enable_liodn(liodn);
> > > +}
> > > +
> > >  /* Release the subwindows reserved for a particular LIODN */  void
> > > pamu_free_subwins(int liodn)  { @@ -752,15 +785,7 @@ static void
> > > __init setup_liodns(void)
> > >  				continue;
> > >  			}
> > >  			ppaace = pamu_get_ppaace(liodn);
> > > -			pamu_init_ppaace(ppaace);
> > > -			/* window size is 2^(WSE+1) bytes */
> > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WSE, 35);
> > > -			ppaace->wbah = 0;
> > > -			set_bf(ppaace->addr_bitfields, PPAACE_AF_WBAL, 0);
> > > -			set_bf(ppaace->impl_attr, PAACE_IA_ATM,
> > > -				PAACE_ATM_NO_XLATE);
> > > -			set_bf(ppaace->addr_bitfields, PAACE_AF_AP,
> > > -				PAACE_AP_PERMS_ALL);
> > > +			setup_default_ppaace(ppaace);
> > >  			if (of_device_is_compatible(node, "fsl,qman-portal"))
> > >  				setup_qbman_paace(ppaace, QMAN_PORTAL_PAACE);
> > >  			if (of_device_is_compatible(node, "fsl,qman")) diff --
> > git
> > > a/drivers/iommu/fsl_pamu.h b/drivers/iommu/fsl_pamu.h index
> > > 8fc1a12..0edcbbbb 100644
> > > --- a/drivers/iommu/fsl_pamu.h
> > > +++ b/drivers/iommu/fsl_pamu.h
> > > @@ -406,5 +406,6 @@ void get_ome_index(u32 *omi_index, struct device
> > > *dev);  int  pamu_update_paace_stash(int liodn, u32 subwin, u32
> > > value);  int pamu_disable_spaace(int liodn, u32 subwin);
> > >  u32 pamu_get_max_subwin_cnt(void);
> > > +void enable_default_dma_window(int liodn);
> > >
> > >  #endif  /* __FSL_PAMU_H */
> > > diff --git a/drivers/iommu/fsl_pamu_domain.c
> > > b/drivers/iommu/fsl_pamu_domain.c index 966ae70..dd6cafc 100644
> > > --- a/drivers/iommu/fsl_pamu_domain.c
> > > +++ b/drivers/iommu/fsl_pamu_domain.c
> > > @@ -340,17 +340,57 @@ static inline struct device_domain_info
> > *find_domain(struct device *dev)
> > >  	return dev->archdata.iommu_domain;
> > >  }
> > >
> > > +/* Disable device DMA capability and enable default DMA window */
> > > +static void disable_device_dma(struct device_domain_info *info,
> > > +				int enable_dma_window)
> > 
> > nit, bool?
> > 
> > > +{
> > > +#ifdef CONFIG_PCI
> > > +	if (info->dev->bus == &pci_bus_type) {
> > > +		struct pci_dev *pdev = NULL;
> > 
> > nit, unnecessary initialization
> > 
> > > +		pdev = to_pci_dev(info->dev);
> > > +		if (pci_is_enabled(pdev))
> > > +			pci_disable_device(pdev);
> > 
> > This looks suspicious.  What's the case where you're finding devices
> > where this is needed?  Logically the driver that called
> > pci_enable_device() should also call pci_disabled_device() when it's
> > done.  Maybe there's a case to be made that we can't rely on the driver,
> > but then maybe there should be a pr_debug/info here to notify that
> > somebody left the device running.  There might also be the question of
> > whether you should test the busmaster bit in the command register rather
> > than trusting these indirect paths if it's really for cleanup.  Thanks,
> > 
> Once the device is detached from the domain, we enable a default DMA
> window for the device. Before enabling the default window, I want to
> ensure that device DMA is disabled. VFIO subsystem handles this for
> vfio-pci. But, can we assume that this would always be the case?

That's what I'm asking.  It seems like pci_enable/disable_device is part
of the driver API and every enable should have a matching disable.  If
this is to catch cases where the disable never happened, then there
should be some indication that the previous driver did something wrong
and we should have some sort of printed warning.  Then there's also the
question of whether this fully does what you want it to.  This is an
indirect way of checking the busmaster bit in the command register.  If
you really want to make sure it's disabled, is it sufficient or should
we be reading the actual command register?  Thanks,

Alex

[PATCH 3/3] Add maintainers entry for the Freescale PAMU driver.

[Varun Sethi]

Add maintainers entry for Freescale PAMU driver.

Signed-off-by: Varun Sethi <Varun.Sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
 MAINTAINERS |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 8a0cbf3..5b6ea5c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3511,6 +3511,13 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
+FREESCALE PAMU DRIVER
+M:	Varun Sethi <varun.sethi-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
+L:	linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
+L:	iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
+S:	Maintained
+F:	drivers/iommu/fsl_pamu*
+
 FREESCALE QUICC ENGINE LIBRARY
 L:	linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
 S:	Orphan
-- 
1.7.9.5

RE: [PATCH 0/3 v2] iommu/fsl: PAMU driver fixes.

[Sethi Varun-B16395]

Hi Joerg,
Please consider these patches for 3.12.

Regards
Varun

> -----Original Message-----
> From: Sethi Varun-B16395
> Sent: Wednesday, October 16, 2013 4:53 PM
> To: joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org; linuxppc-
> dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Yoder Stuart-B08248;
> Wood Scott-B07421; alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org; Bhushan Bharat-R65777
> Cc: Sethi Varun-B16395
> Subject: [PATCH 0/3 v2] iommu/fsl: PAMU driver fixes.
> 
> The first patch fixes a build failure, when we try to build for a
> Freescale platform without PCI support.
> 
> The second patch enables a default DMA window for the device, once it's
> detached from a domain. In case of vfio, once device is detached from a
> guest it can be again used by the host.
> 
> The last patch adds the maintainer entry for the Freescale PAMU driver.
> 
> Varun Sethi (3):
>   iommu/fsl: Factor out PCI specific code.
>   iommu/fsl: Enable default DMA window for PCIe devices once detached
>   Add maintainers entry for the Freescale PAMU driver.
> 
>  MAINTAINERS                     |    7 ++
>  drivers/iommu/fsl_pamu.c        |   43 ++++++++++---
>  drivers/iommu/fsl_pamu.h        |    1 +
>  drivers/iommu/fsl_pamu_domain.c |  134 +++++++++++++++++++++++++--------
> ------
>  4 files changed, 128 insertions(+), 57 deletions(-)
> 
> --
> 1.7.9.5