From: Baptiste Reynal <b.reynal-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
To: kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: kim.phillips-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
Baptiste Reynal
<b.reynal-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>,
"open list:VFIO DRIVER"
<kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
eric.auger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
marc.zyngier-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
Gavin Shan
<gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>,
open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Alexander Gordeev
<agordeev-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Antonios Motakis
<a.motakis-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>,
tech-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org,
Jiang Liu <jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
christoffer.dall-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH v13 15/18] vfio: pass an opaque pointer on virqfd initialization
Date: Fri, 30 Jan 2015 14:46:21 +0100 [thread overview]
Message-ID: <1422625584-3741-16-git-send-email-b.reynal@virtualopensystems.com> (raw)
In-Reply-To: <1422625584-3741-1-git-send-email-b.reynal-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
From: Antonios Motakis <a.motakis-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
VFIO_PCI passes the VFIO device structure *vdev via eventfd to the handler
that implements masking/unmasking of IRQs via an eventfd. We can replace
it in the virqfd infrastructure with an opaque type so we can make use
of the mechanism from other VFIO bus drivers.
Signed-off-by: Antonios Motakis <a.motakis-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
---
drivers/vfio/pci/vfio_pci_intrs.c | 30 ++++++++++++++++--------------
1 file changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index b35bc16..5b5fc23 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -31,10 +31,10 @@
* IRQfd - generic
*/
struct virqfd {
- struct vfio_pci_device *vdev;
+ void *opaque;
struct eventfd_ctx *eventfd;
- int (*handler)(struct vfio_pci_device *, void *);
- void (*thread)(struct vfio_pci_device *, void *);
+ int (*handler)(void *, void *);
+ void (*thread)(void *, void *);
void *data;
struct work_struct inject;
wait_queue_t wait;
@@ -74,7 +74,7 @@ static int virqfd_wakeup(wait_queue_t *wait, unsigned mode, int sync, void *key)
if (flags & POLLIN) {
/* An event has been signaled, call function */
if ((!virqfd->handler ||
- virqfd->handler(virqfd->vdev, virqfd->data)) &&
+ virqfd->handler(virqfd->opaque, virqfd->data)) &&
virqfd->thread)
schedule_work(&virqfd->inject);
}
@@ -124,12 +124,12 @@ static void virqfd_inject(struct work_struct *work)
{
struct virqfd *virqfd = container_of(work, struct virqfd, inject);
if (virqfd->thread)
- virqfd->thread(virqfd->vdev, virqfd->data);
+ virqfd->thread(virqfd->opaque, virqfd->data);
}
-int vfio_virqfd_enable(struct vfio_pci_device *vdev,
- int (*handler)(struct vfio_pci_device *, void *),
- void (*thread)(struct vfio_pci_device *, void *),
+int vfio_virqfd_enable(void *opaque,
+ int (*handler)(void *, void *),
+ void (*thread)(void *, void *),
void *data, struct virqfd **pvirqfd, int fd)
{
struct fd irqfd;
@@ -143,7 +143,7 @@ int vfio_virqfd_enable(struct vfio_pci_device *vdev,
return -ENOMEM;
virqfd->pvirqfd = pvirqfd;
- virqfd->vdev = vdev;
+ virqfd->opaque = opaque;
virqfd->handler = handler;
virqfd->thread = thread;
virqfd->data = data;
@@ -196,7 +196,7 @@ int vfio_virqfd_enable(struct vfio_pci_device *vdev,
* before we registered and trigger it as if we didn't miss it.
*/
if (events & POLLIN) {
- if ((!handler || handler(vdev, data)) && thread)
+ if ((!handler || handler(opaque, data)) && thread)
schedule_work(&virqfd->inject);
}
@@ -243,8 +243,10 @@ EXPORT_SYMBOL_GPL(vfio_virqfd_disable);
/*
* INTx
*/
-static void vfio_send_intx_eventfd(struct vfio_pci_device *vdev, void *unused)
+static void vfio_send_intx_eventfd(void *opaque, void *unused)
{
+ struct vfio_pci_device *vdev = opaque;
+
if (likely(is_intx(vdev) && !vdev->virq_disabled))
eventfd_signal(vdev->ctx[0].trigger, 1);
}
@@ -287,9 +289,9 @@ void vfio_pci_intx_mask(struct vfio_pci_device *vdev)
* a signal is necessary, which can then be handled via a work queue
* or directly depending on the caller.
*/
-static int vfio_pci_intx_unmask_handler(struct vfio_pci_device *vdev,
- void *unused)
+static int vfio_pci_intx_unmask_handler(void *opaque, void *unused)
{
+ struct vfio_pci_device *vdev = opaque;
struct pci_dev *pdev = vdev->pdev;
unsigned long flags;
int ret = 0;
@@ -641,7 +643,7 @@ static int vfio_pci_set_intx_unmask(struct vfio_pci_device *vdev,
} else if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
int32_t fd = *(int32_t *)data;
if (fd >= 0)
- return vfio_virqfd_enable(vdev,
+ return vfio_virqfd_enable((void *) vdev,
vfio_pci_intx_unmask_handler,
vfio_send_intx_eventfd, NULL,
&vdev->ctx[0].unmask, fd);
--
2.2.2
next prev parent reply other threads:[~2015-01-30 13:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-30 13:46 [PATCH v13 00/18] VFIO support for platform devices Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 05/18] vfio/platform: return info for device memory mapped IO regions Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 07/18] vfio/platform: support MMAP of MMIO regions Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 10/18] vfio/platform: trigger an interrupt via eventfd Baptiste Reynal
[not found] ` <1422625584-3741-1-git-send-email-b.reynal-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org>
2015-01-30 13:46 ` [PATCH v13 01/18] vfio/platform: initial skeleton of VFIO support for platform devices Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 02/18] vfio: platform: probe to devices on the platform bus Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 03/18] vfio: platform: add the VFIO PLATFORM module to Kconfig Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 04/18] vfio/platform: return info for bound device Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 06/18] vfio/platform: read and write support for the device fd Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 08/18] vfio/platform: return IRQ info Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 09/18] vfio/platform: initial interrupts support code Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 11/18] vfio/platform: support for level sensitive interrupts Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 12/18] vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and export Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 13/18] vfio: virqfd: rename vfio_pci_virqfd_init and vfio_pci_virqfd_exit Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 14/18] vfio: add local lock for virqfd instead of depending on VFIO PCI Baptiste Reynal
2015-01-30 13:46 ` Baptiste Reynal [this message]
2015-01-30 13:46 ` [PATCH v13 16/18] vfio: move eventfd support code for VFIO_PCI to a separate file Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 17/18] vfio: initialize the virqfd workqueue in VFIO generic code Baptiste Reynal
2015-01-30 13:46 ` [PATCH v13 18/18] vfio/platform: implement IRQ masking/unmasking via an eventfd Baptiste Reynal
2015-02-26 17:02 ` [PATCH v13 00/18] VFIO support for platform devices Baptiste Reynal
2015-02-26 17:30 ` Alex Williamson
2015-02-26 17:32 ` Marc Zyngier
2015-02-27 11:05 ` Baptiste Reynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422625584-3741-16-git-send-email-b.reynal@virtualopensystems.com \
--to=b.reynal-lrhrjnjw1ufhk3s98ze1ajgjjy/sre9j@public.gmane.org \
--cc=a.motakis-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org \
--cc=agordeev-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=christoffer.dall-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=eric.auger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=gwshan-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=jiang.liu-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=kim.phillips-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kvmarm-FPEHb7Xf0XXUo1n7N8X6UoWGPAHP3yOg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
--cc=tech-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox