iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Feng Wu <feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: pbonzini-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
	alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
	joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org,
	mtosatti-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	eric.auger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Subject: [PATCH v9 17/18] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked
Date: Fri, 18 Sep 2015 22:29:55 +0800	[thread overview]
Message-ID: <1442586596-5920-18-git-send-email-feng.wu@intel.com> (raw)
In-Reply-To: <1442586596-5920-1-git-send-email-feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>

This patch updates the Posted-Interrupts Descriptor when vCPU
is blocked.

pre-block:
- Add the vCPU to the blocked per-CPU list
- Set 'NV' to POSTED_INTR_WAKEUP_VECTOR

post-block:
- Remove the vCPU from the per-CPU list

Signed-off-by: Feng Wu <feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
v9:
- Add description for blocked_vcpu_on_cpu_lock in Documentation/virtual/kvm/locking.txt
- Check !kvm_arch_has_assigned_device(vcpu->kvm) first, then
  !irq_remapping_cap(IRQ_POSTING_CAP)

v8:
- Rename 'pi_pre_block' to 'pre_block'
- Rename 'pi_post_block' to 'post_block'
- Change some comments
- Only add the vCPU to the blocking list when the VM has assigned devices.

 Documentation/virtual/kvm/locking.txt |  12 +++
 arch/x86/include/asm/kvm_host.h       |  13 +++
 arch/x86/kvm/vmx.c                    | 153 ++++++++++++++++++++++++++++++++++
 arch/x86/kvm/x86.c                    |  53 +++++++++---
 include/linux/kvm_host.h              |   3 +
 virt/kvm/kvm_main.c                   |   3 +
 6 files changed, 227 insertions(+), 10 deletions(-)

diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt
index d68af4d..19f94a6 100644
--- a/Documentation/virtual/kvm/locking.txt
+++ b/Documentation/virtual/kvm/locking.txt
@@ -166,3 +166,15 @@ Comment:	The srcu read lock must be held while accessing memslots (e.g.
 		MMIO/PIO address->device structure mapping (kvm->buses).
 		The srcu index can be stored in kvm_vcpu->srcu_idx per vcpu
 		if it is needed by multiple functions.
+
+Name:		blocked_vcpu_on_cpu_lock
+Type:		spinlock_t
+Arch:		x86
+Protects:	blocked_vcpu_on_cpu
+Comment:	This is a per-CPU lock and it is used for VT-d posted-interrupts.
+		When VT-d posted-interrupts is supported and the VM has assigned
+		devices, we put the blocked vCPU on the list blocked_vcpu_on_cpu
+		protected by blocked_vcpu_on_cpu_lock, when VT-d hardware issues
+		wakeup notification event since external interrupts from the
+		assigned devices happens, we will find the vCPU on the list to
+		wakeup.
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 0ddd353..304fbb5 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -552,6 +552,8 @@ struct kvm_vcpu_arch {
 	 */
 	bool write_fault_to_shadow_pgtable;
 
+	bool halted;
+
 	/* set at EPT violation at this point */
 	unsigned long exit_qualification;
 
@@ -864,6 +866,17 @@ struct kvm_x86_ops {
 	/* pmu operations of sub-arch */
 	const struct kvm_pmu_ops *pmu_ops;
 
+	/*
+	 * Architecture specific hooks for vCPU blocking due to
+	 * HLT instruction.
+	 * Returns for .pre_block():
+	 *    - 0 means continue to block the vCPU.
+	 *    - 1 means we cannot block the vCPU since some event
+	 *        happens during this period, such as, 'ON' bit in
+	 *        posted-interrupts descriptor is set.
+	 */
+	int (*pre_block)(struct kvm_vcpu *vcpu);
+	void (*post_block)(struct kvm_vcpu *vcpu);
 	int (*update_pi_irte)(struct kvm *kvm, unsigned int host_irq,
 			      uint32_t guest_irq, bool set);
 };
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 902a67d..9968896 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -879,6 +879,13 @@ static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
 static DEFINE_PER_CPU(struct list_head, loaded_vmcss_on_cpu);
 static DEFINE_PER_CPU(struct desc_ptr, host_gdt);
 
+/*
+ * We maintian a per-CPU linked-list of vCPU, so in wakeup_handler() we
+ * can find which vCPU should be waken up.
+ */
+static DEFINE_PER_CPU(struct list_head, blocked_vcpu_on_cpu);
+static DEFINE_PER_CPU(spinlock_t, blocked_vcpu_on_cpu_lock);
+
 static unsigned long *vmx_io_bitmap_a;
 static unsigned long *vmx_io_bitmap_b;
 static unsigned long *vmx_msr_bitmap_legacy;
@@ -2985,6 +2992,8 @@ static int hardware_enable(void)
 		return -EBUSY;
 
 	INIT_LIST_HEAD(&per_cpu(loaded_vmcss_on_cpu, cpu));
+	INIT_LIST_HEAD(&per_cpu(blocked_vcpu_on_cpu, cpu));
+	spin_lock_init(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
 
 	/*
 	 * Now we can enable the vmclear operation in kdump
@@ -6121,6 +6130,25 @@ static void update_ple_window_actual_max(void)
 			                    ple_window_grow, INT_MIN);
 }
 
+/*
+ * Handler for POSTED_INTERRUPT_WAKEUP_VECTOR.
+ */
+static void wakeup_handler(void)
+{
+	struct kvm_vcpu *vcpu;
+	int cpu = smp_processor_id();
+
+	spin_lock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+	list_for_each_entry(vcpu, &per_cpu(blocked_vcpu_on_cpu, cpu),
+			blocked_vcpu_list) {
+		struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
+
+		if (pi_test_on(pi_desc) == 1)
+			kvm_vcpu_kick(vcpu);
+	}
+	spin_unlock(&per_cpu(blocked_vcpu_on_cpu_lock, cpu));
+}
+
 static __init int hardware_setup(void)
 {
 	int r = -ENOMEM, i, msr;
@@ -6305,6 +6333,8 @@ static __init int hardware_setup(void)
 		kvm_x86_ops->enable_log_dirty_pt_masked = NULL;
 	}
 
+	kvm_set_posted_intr_wakeup_handler(wakeup_handler);
+
 	return alloc_kvm_area();
 
 out8:
@@ -10430,6 +10460,126 @@ static void vmx_enable_log_dirty_pt_masked(struct kvm *kvm,
 }
 
 /*
+ * This routine does the following things for vCPU which is going
+ * to be blocked if VT-d PI is enabled.
+ * - Store the vCPU to the wakeup list, so when interrupts happen
+ *   we can find the right vCPU to wake up.
+ * - Change the Posted-interrupt descriptor as below:
+ *      'NDST' <-- vcpu->pre_pcpu
+ *      'NV' <-- POSTED_INTR_WAKEUP_VECTOR
+ * - If 'ON' is set during this process, which means at least one
+ *   interrupt is posted for this vCPU, we cannot block it, in
+ *   this case, return 1, otherwise, return 0.
+ *
+ */
+static int vmx_pre_block(struct kvm_vcpu *vcpu)
+{
+	unsigned long flags;
+	unsigned int dest;
+	struct pi_desc old, new;
+	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
+
+	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
+		!irq_remapping_cap(IRQ_POSTING_CAP))
+		return 0;
+
+	vcpu->pre_pcpu = vcpu->cpu;
+	spin_lock_irqsave(&per_cpu(blocked_vcpu_on_cpu_lock,
+			  vcpu->pre_pcpu), flags);
+	list_add_tail(&vcpu->blocked_vcpu_list,
+		      &per_cpu(blocked_vcpu_on_cpu,
+		      vcpu->pre_pcpu));
+	spin_unlock_irqrestore(&per_cpu(blocked_vcpu_on_cpu_lock,
+			       vcpu->pre_pcpu), flags);
+
+	do {
+		old.control = new.control = pi_desc->control;
+
+		/*
+		 * We should not block the vCPU if
+		 * an interrupt is posted for it.
+		 */
+		if (pi_test_on(pi_desc) == 1) {
+			spin_lock_irqsave(&per_cpu(blocked_vcpu_on_cpu_lock,
+					  vcpu->pre_pcpu), flags);
+			list_del(&vcpu->blocked_vcpu_list);
+			spin_unlock_irqrestore(
+					&per_cpu(blocked_vcpu_on_cpu_lock,
+					vcpu->pre_pcpu), flags);
+			vcpu->pre_pcpu = -1;
+
+			return 1;
+		}
+
+		WARN((pi_desc->sn == 1),
+		     "Warning: SN field of posted-interrupts "
+		     "is set before blocking\n");
+
+		/*
+		 * Since vCPU can be preempted during this process,
+		 * vcpu->cpu could be different with pre_pcpu, we
+		 * need to set pre_pcpu as the destination of wakeup
+		 * notification event, then we can find the right vCPU
+		 * to wakeup in wakeup handler if interrupts happen
+		 * when the vCPU is in blocked state.
+		 */
+		dest = cpu_physical_id(vcpu->pre_pcpu);
+
+		if (x2apic_enabled())
+			new.ndst = dest;
+		else
+			new.ndst = (dest << 8) & 0xFF00;
+
+		/* set 'NV' to 'wakeup vector' */
+		new.nv = POSTED_INTR_WAKEUP_VECTOR;
+	} while (cmpxchg(&pi_desc->control, old.control,
+			new.control) != old.control);
+
+	return 0;
+}
+
+static void vmx_post_block(struct kvm_vcpu *vcpu)
+{
+	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
+	struct pi_desc old, new;
+	unsigned int dest;
+	unsigned long flags;
+
+	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
+		!irq_remapping_cap(IRQ_POSTING_CAP))
+		return;
+
+	do {
+		old.control = new.control = pi_desc->control;
+
+		dest = cpu_physical_id(vcpu->cpu);
+
+		if (x2apic_enabled())
+			new.ndst = dest;
+		else
+			new.ndst = (dest << 8) & 0xFF00;
+
+		/* Allow posting non-urgent interrupts */
+		new.sn = 0;
+
+		/* set 'NV' to 'notification vector' */
+		new.nv = POSTED_INTR_VECTOR;
+	} while (cmpxchg(&pi_desc->control, old.control,
+			new.control) != old.control);
+
+	if(vcpu->pre_pcpu != -1) {
+		spin_lock_irqsave(
+			&per_cpu(blocked_vcpu_on_cpu_lock,
+			vcpu->pre_pcpu), flags);
+		list_del(&vcpu->blocked_vcpu_list);
+		spin_unlock_irqrestore(
+			&per_cpu(blocked_vcpu_on_cpu_lock,
+			vcpu->pre_pcpu), flags);
+		vcpu->pre_pcpu = -1;
+	}
+}
+
+/*
  * vmx_update_pi_irte - set IRTE for Posted-Interrupts
  *
  * @kvm: kvm
@@ -10620,6 +10770,9 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.flush_log_dirty = vmx_flush_log_dirty,
 	.enable_log_dirty_pt_masked = vmx_enable_log_dirty_pt_masked,
 
+	.pre_block = vmx_pre_block,
+	.post_block = vmx_post_block,
+
 	.pmu_ops = &intel_pmu_ops,
 
 	.update_pi_irte = vmx_update_pi_irte,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 58688aa..46f55b2 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5869,7 +5869,12 @@ int kvm_vcpu_halt(struct kvm_vcpu *vcpu)
 {
 	++vcpu->stat.halt_exits;
 	if (irqchip_in_kernel(vcpu->kvm)) {
-		vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
+		/* Handle posted-interrupt when vCPU is to be halted */
+		if (!kvm_x86_ops->pre_block ||
+				kvm_x86_ops->pre_block(vcpu) == 0) {
+			vcpu->arch.halted = true;
+			vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
+		}
 		return 1;
 	} else {
 		vcpu->run->exit_reason = KVM_EXIT_HLT;
@@ -6518,6 +6523,20 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 			kvm_vcpu_reload_apic_access_page(vcpu);
 	}
 
+	/*
+	 * KVM_REQ_EVENT is not set when posted interrupts are set by
+	 * VT-d hardware, so we have to update RVI unconditionally.
+	 */
+	if (kvm_lapic_enabled(vcpu)) {
+		/*
+		 * Update architecture specific hints for APIC
+		 * virtual interrupt delivery.
+		 */
+		if (kvm_x86_ops->hwapic_irr_update)
+			kvm_x86_ops->hwapic_irr_update(vcpu,
+				kvm_lapic_find_highest_irr(vcpu));
+	}
+
 	if (kvm_check_request(KVM_REQ_EVENT, vcpu) || req_int_win) {
 		kvm_apic_accept_events(vcpu);
 		if (vcpu->arch.mp_state == KVM_MP_STATE_INIT_RECEIVED) {
@@ -6534,13 +6553,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 			kvm_x86_ops->enable_irq_window(vcpu);
 
 		if (kvm_lapic_enabled(vcpu)) {
-			/*
-			 * Update architecture specific hints for APIC
-			 * virtual interrupt delivery.
-			 */
-			if (kvm_x86_ops->hwapic_irr_update)
-				kvm_x86_ops->hwapic_irr_update(vcpu,
-					kvm_lapic_find_highest_irr(vcpu));
 			update_cr8_intercept(vcpu);
 			kvm_lapic_sync_to_vapic(vcpu);
 		}
@@ -6711,10 +6723,31 @@ static int vcpu_run(struct kvm_vcpu *vcpu)
 
 	for (;;) {
 		if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE &&
-		    !vcpu->arch.apf.halted)
+		    !vcpu->arch.apf.halted) {
+			/*
+			 * For some cases, we can get here with
+			 * vcpu->arch.halted being true.
+			 */
+			if (kvm_x86_ops->post_block && vcpu->arch.halted) {
+				kvm_x86_ops->post_block(vcpu);
+				vcpu->arch.halted = false;
+			}
+
 			r = vcpu_enter_guest(vcpu);
-		else
+		} else {
 			r = vcpu_block(kvm, vcpu);
+
+			/*
+			 * post_block() must be called after
+			 * pre_block() which is called in
+			 * kvm_vcpu_halt().
+			 */
+			if (kvm_x86_ops->post_block && vcpu->arch.halted) {
+				kvm_x86_ops->post_block(vcpu);
+				vcpu->arch.halted = false;
+			}
+		}
+
 		if (r <= 0)
 			break;
 
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index feba1fb..bf462e7 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -231,6 +231,9 @@ struct kvm_vcpu {
 	unsigned long requests;
 	unsigned long guest_debug;
 
+	int pre_pcpu;
+	struct list_head blocked_vcpu_list;
+
 	struct mutex mutex;
 	struct kvm_run *run;
 
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 8b8a444..191c7eb 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -220,6 +220,9 @@ int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id)
 	init_waitqueue_head(&vcpu->wq);
 	kvm_async_pf_vcpu_init(vcpu);
 
+	vcpu->pre_pcpu = -1;
+	INIT_LIST_HEAD(&vcpu->blocked_vcpu_list);
+
 	page = alloc_page(GFP_KERNEL | __GFP_ZERO);
 	if (!page) {
 		r = -ENOMEM;
-- 
2.1.0

  parent reply	other threads:[~2015-09-18 14:29 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-18 14:29 [PATCH v9 00/18] Add VT-d Posted-Interrupts support - including prerequisite series Feng Wu
2015-09-18 14:29 ` [PATCH v9 03/18] KVM: arm/arm64: select IRQ_BYPASS_MANAGER Feng Wu
2015-09-21 19:32   ` Eric Auger
2015-09-18 14:29 ` [PATCH v9 08/18] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-09-18 14:29 ` [PATCH v9 10/18] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
     [not found] ` <1442586596-5920-1-git-send-email-feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-09-18 14:29   ` [PATCH v9 01/18] virt: IRQ bypass manager Feng Wu
     [not found]     ` <1442586596-5920-2-git-send-email-feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-09-18 15:34       ` Wu, Feng
2015-09-18 14:29   ` [PATCH v9 02/18] KVM: x86: select IRQ_BYPASS_MANAGER Feng Wu
2015-09-18 14:29   ` [PATCH v9 04/18] KVM: create kvm_irqfd.h Feng Wu
     [not found]     ` <1442586596-5920-5-git-send-email-feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-09-18 15:35       ` Wu, Feng
2015-09-18 14:29   ` [PATCH v9 05/18] KVM: introduce kvm_arch functions for IRQ bypass Feng Wu
2015-09-18 14:29   ` [PATCH v9 06/18] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-09-18 14:29   ` [PATCH v9 07/18] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-09-18 14:29   ` [PATCH v9 09/18] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-09-18 14:29   ` [PATCH v9 11/18] KVM: make kvm_set_msi_irq() public Feng Wu
2015-09-18 14:29   ` [PATCH v9 12/18] vfio: Register/unregister irq_bypass_producer Feng Wu
     [not found]     ` <1442586596-5920-13-git-send-email-feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-09-18 17:19       ` Alex Williamson
2015-09-21  8:56       ` Wu, Feng
     [not found]         ` <E959C4978C3B6342920538CF579893F00272346C-0J0gbvR4kTg/UvCtAeCM4rfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-09-21  9:32           ` Paolo Bonzini
     [not found]             ` <55FFCE9F.5090001-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-09-21 11:35               ` Wu, Feng
     [not found]                 ` <E959C4978C3B6342920538CF579893F002723C42-0J0gbvR4kTg/UvCtAeCM4rfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-09-21 12:06                   ` Paolo Bonzini
     [not found]                     ` <55FFF2CC.6040107-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-09-21 12:08                       ` Wu, Feng
2015-09-21 12:53               ` Wu, Feng
2015-09-21 13:02                 ` Paolo Bonzini
     [not found]                   ` <55FFFFEE.6090800-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-09-21 19:46                     ` Eric Auger
2016-04-26 20:08       ` Alex Williamson
     [not found]         ` <20160426140816.67b8b37c-1yVPhWWZRC1BDLzU/O5InQ@public.gmane.org>
2016-04-27  1:32           ` Wu, Feng
     [not found]             ` <E959C4978C3B6342920538CF579893F00C3D3D29-0J0gbvR4kTggGBtAFL8yw7fspsVTdybXVpNB7YpNyf8@public.gmane.org>
2016-04-28 16:40               ` Alex Williamson
2016-04-28 15:35           ` Eric Auger
2015-09-18 14:29   ` [PATCH v9 13/18] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-09-18 14:29   ` [PATCH v9 14/18] KVM: Implement IRQ bypass consumer callbacks for x86 Feng Wu
2015-09-18 14:29   ` [PATCH v9 15/18] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-09-18 14:29   ` [PATCH v9 16/18] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-09-18 14:29   ` Feng Wu [this message]
     [not found]     ` <1442586596-5920-18-git-send-email-feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-09-18 16:06       ` [PATCH v9 17/18] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Paolo Bonzini
     [not found]         ` <55FC3690.3050905-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-09-19  7:11           ` Wu, Feng
2015-09-21  2:16         ` Wu, Feng
     [not found]           ` <E959C4978C3B6342920538CF579893F0027228E2-0J0gbvR4kTg/UvCtAeCM4rfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-09-21  5:32             ` Paolo Bonzini
     [not found]               ` <55FF968A.6000509-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-09-21  5:45                 ` Wu, Feng
2015-10-14 23:41     ` David Matlack
     [not found]       ` <CALzav=f8KhXswW-FCuKOYmWoih3QM3HMFHkGmQ3q9mnLoqg+hA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-15  1:33         ` Wu, Feng
2015-10-15 17:39           ` David Matlack
     [not found]             ` <CALzav=d62jW7ZY3wn_-u6uhfvFXtCsvS_UoK2TPyZMvp=OPJpQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-15 18:13               ` Paolo Bonzini
     [not found]                 ` <561FECB7.6080503-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-10-16  1:45                   ` Wu, Feng
2015-09-18 14:29   ` [PATCH v9 18/18] iommu/vt-d: Add a command line parameter for VT-d posted-interrupts Feng Wu
     [not found]     ` <1442586596-5920-19-git-send-email-feng.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2015-09-21 13:46       ` Joerg Roedel
2015-09-18 14:58   ` [PATCH v9 00/18] Add VT-d Posted-Interrupts support - including prerequisite series Paolo Bonzini
     [not found]     ` <55FC2699.10608-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-09-18 15:08       ` Wu, Feng
     [not found]         ` <E959C4978C3B6342920538CF579893F00271CB9C-0J0gbvR4kTg/UvCtAeCM4rfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-09-18 15:21           ` Paolo Bonzini
2015-09-18 15:38             ` Wu, Feng
2015-09-18 17:57       ` Alex Williamson
2015-09-25  1:49   ` Wu, Feng
     [not found]     ` <E959C4978C3B6342920538CF579893F009A46D3D-zVW8+lm/ZpmiAffOGbnezLfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-09-25 11:14       ` Paolo Bonzini
     [not found]         ` <56052C96.7070805-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-09-28 10:14           ` Wu, Feng
     [not found]             ` <E959C4978C3B6342920538CF579893F009A56378-0J0gbvR4kTg/UvCtAeCM4rfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2015-09-28 10:18               ` Paolo Bonzini
     [not found]                 ` <560913FB.1070107-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2015-09-28 10:22                   ` Wu, Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1442586596-5920-18-git-send-email-feng.wu@intel.com \
    --to=feng.wu-ral2jqcrhueavxtiumwx3w@public.gmane.org \
    --cc=alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=eric.auger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
    --cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
    --cc=kvm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mtosatti-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=pbonzini-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).