From: Jacob Pan <jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>,
LKML <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Cc: Mika Kuoppala <mika.kuoppala-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH v2] iommu/intel-iommu: fix pasid table size encoding
Date: Tue, 6 Dec 2016 10:14:23 -0800 [thread overview]
Message-ID: <1481048063-56808-1-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
Different encodings are used to represent supported PASID bits
and number of PASID table entries.
The current code assigns ecap_pss directly to extended context
table entry PTS which is wrong and could result in writing
non-zero bits to the reserved fields. IOMMU fault reason
11 will be reported when reserved bits are nonzero.
This patch converts ecap_pss to extend context entry pts encoding
based on VT-d spec. Chapter 9.4 as follows:
- number of PASID bits = ecap_pss + 1
- number of PASID table entries = 2^(pts + 5)
Software assigned limit of pasid_max value is also respected to
match the allocation limitation of PASID table.
cc: Mika Kuoppala <mika.kuoppala-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
cc: Ashok Raj <ashok.raj-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jacob Pan <jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
drivers/iommu/intel-iommu.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index 27596e6..5d9cddc 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -5173,6 +5173,25 @@ static void intel_iommu_remove_device(struct device *dev)
}
#ifdef CONFIG_INTEL_IOMMU_SVM
+#define MAX_NR_PASID_BITS (20)
+static inline unsigned long intel_iommu_get_pts(struct intel_iommu *iommu)
+{
+ /*
+ * Convert ecap_pss to extend context entry pts encoding, also
+ * respect the soft pasid_max value set by the iommu.
+ * - number of PASID bits = ecap_pss + 1
+ * - number of PASID table entries = 2^(pts + 5)
+ * Therefore, pts = ecap_pss - 4
+ * e.g. KBL ecap_pss = 0x13, PASID has 20 bits, pts = 15
+ */
+ if (ecap_pss(iommu->ecap) < 5)
+ return 0;
+
+ /* pasid_max is encoded as actual number of entries not the bits */
+ return find_first_bit((unsigned long *)&iommu->pasid_max,
+ MAX_NR_PASID_BITS) - 5;
+}
+
int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct intel_svm_dev *sdev)
{
struct device_domain_info *info;
@@ -5205,7 +5224,9 @@ int intel_iommu_enable_pasid(struct intel_iommu *iommu, struct intel_svm_dev *sd
if (!(ctx_lo & CONTEXT_PASIDE)) {
context[1].hi = (u64)virt_to_phys(iommu->pasid_state_table);
- context[1].lo = (u64)virt_to_phys(iommu->pasid_table) | ecap_pss(iommu->ecap);
+ context[1].lo = (u64)virt_to_phys(iommu->pasid_table) |
+ intel_iommu_get_pts(iommu);
+
wmb();
/* CONTEXT_TT_MULTI_LEVEL and CONTEXT_TT_DEV_IOTLB are both
* extended to permit requests-with-PASID if the PASIDE bit
--
2.7.4
next reply other threads:[~2016-12-06 18:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-06 18:14 Jacob Pan [this message]
2016-12-12 16:34 ` [PATCH v2] iommu/intel-iommu: fix pasid table size encoding Jacob Pan
2016-12-14 12:36 ` Mika Kuoppala
[not found] ` <87lgvi8z6v.fsf-2yH08g+lheutqXYlAKuG4QC/G2K4zDHf@public.gmane.org>
2016-12-15 20:07 ` Raj, Ashok
2016-12-15 22:51 ` Joerg Roedel
[not found] ` <1481048063-56808-1-git-send-email-jacob.jun.pan-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2017-01-04 14:17 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481048063-56808-1-git-send-email-jacob.jun.pan@linux.intel.com \
--to=jacob.jun.pan-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mika.kuoppala-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).