From: Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: jroedel-l3A5Bk7waGM@public.gmane.org
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v10 04/12] iommu/amd: Define bit fields for DTE particularly
Date: Wed, 9 Aug 2017 16:33:36 +0800 [thread overview]
Message-ID: <1502267624-7066-5-git-send-email-bhe@redhat.com> (raw)
In-Reply-To: <1502267624-7066-1-git-send-email-bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
In AMD-Vi spec several bits of IO PTE fields and DTE fields are similar
so that both of them can share the same MACRO definition. However
defining them respectively can make code more read-able. Do it now.
Signed-off-by: Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/iommu/amd_iommu.c | 8 ++++----
drivers/iommu/amd_iommu_types.h | 18 ++++++++++++++----
2 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 6d2fc40a086d..097db07354b4 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1537,9 +1537,9 @@ static int iommu_map_page(struct protection_domain *dom,
if (count > 1) {
__pte = PAGE_SIZE_PTE(phys_addr, page_size);
- __pte |= PM_LEVEL_ENC(7) | IOMMU_PTE_P | IOMMU_PTE_FC;
+ __pte |= PM_LEVEL_ENC(7) | IOMMU_PTE_PR | IOMMU_PTE_FC;
} else
- __pte = phys_addr | IOMMU_PTE_P | IOMMU_PTE_FC;
+ __pte = phys_addr | IOMMU_PTE_PR | IOMMU_PTE_FC;
if (prot & IOMMU_PROT_IR)
__pte |= IOMMU_PTE_IR;
@@ -2053,7 +2053,7 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
<< DEV_ENTRY_MODE_SHIFT;
- pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
+ pte_root |= DTE_FLAG_IR | DTE_FLAG_IW | DTE_FLAG_V | DTE_FLAG_TV;
flags = amd_iommu_dev_table[devid].data[1];
@@ -2096,7 +2096,7 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
static void clear_dte_entry(u16 devid)
{
/* remove entry from the device table seen by the hardware */
- amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
+ amd_iommu_dev_table[devid].data[0] = DTE_FLAG_V | DTE_FLAG_TV;
amd_iommu_dev_table[devid].data[1] &= DTE_FLAG_MASK;
amd_iommu_apply_erratum_63(devid);
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index db7ceb4d0957..f88e802481a3 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -265,7 +265,7 @@
#define PM_LEVEL_INDEX(x, a) (((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
#define PM_LEVEL_ENC(x) (((x) << 9) & 0xe00ULL)
#define PM_LEVEL_PDE(x, a) ((a) | PM_LEVEL_ENC((x)) | \
- IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+ IOMMU_PTE_PR | IOMMU_PTE_IR | IOMMU_PTE_IW)
#define PM_PTE_LEVEL(pte) (((pte) >> 9) & 0x7ULL)
#define PM_MAP_4k 0
@@ -314,13 +314,23 @@
#define PTE_LEVEL_PAGE_SIZE(level) \
(1ULL << (12 + (9 * (level))))
-#define IOMMU_PTE_P (1ULL << 0)
-#define IOMMU_PTE_TV (1ULL << 1)
+/*
+ * Bit value definition for I/O PTE fields
+ */
+#define IOMMU_PTE_PR (1ULL << 0)
#define IOMMU_PTE_U (1ULL << 59)
#define IOMMU_PTE_FC (1ULL << 60)
#define IOMMU_PTE_IR (1ULL << 61)
#define IOMMU_PTE_IW (1ULL << 62)
+/*
+ * Bit value definition for DTE fields
+ */
+#define DTE_FLAG_V (1ULL << 0)
+#define DTE_FLAG_TV (1ULL << 1)
+#define DTE_FLAG_IR (1ULL << 61)
+#define DTE_FLAG_IW (1ULL << 62)
+
#define DTE_FLAG_IOTLB (1ULL << 32)
#define DTE_FLAG_GV (1ULL << 55)
#define DTE_FLAG_MASK (0x3ffULL << 32)
@@ -342,7 +352,7 @@
#define GCR3_VALID 0x01ULL
#define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
-#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
+#define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_PR)
#define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
#define IOMMU_PTE_MODE(pte) (((pte) >> 9) & 0x07)
--
2.5.5
next prev parent reply other threads:[~2017-08-09 8:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-09 8:33 [PATCH v10 00/12] Fix the on-flight DMA issue on system with amd iommu Baoquan He
2017-08-09 8:33 ` [PATCH v10 01/12] iommu/amd: Detect pre enabled translation Baoquan He
2017-08-09 8:33 ` [PATCH v10 03/12] Revert "iommu/amd: Suppress IO_PAGE_FAULTs in kdump kernel" Baoquan He
2017-08-09 8:33 ` [PATCH v10 05/12] iommu/amd: Add function copy_dev_tables() Baoquan He
2017-08-09 8:33 ` [PATCH v10 06/12] iommu/amd: copy old trans table from old kernel Baoquan He
2017-08-09 8:33 ` [PATCH v10 07/12] iommu/amd: Do sanity check for address translation and irq remap of old dev table entry Baoquan He
2017-08-09 8:33 ` [PATCH v10 09/12] iommu/amd: Use is_attach_deferred call-back Baoquan He
2017-08-09 8:33 ` [PATCH v10 10/12] iommu/amd: Allocate memory below 4G for dev table if translation pre-enabled Baoquan He
2017-08-09 8:33 ` [PATCH v10 11/12] iommu/amd: Don't copy GCR3 table root pointer Baoquan He
2017-08-09 8:33 ` [PATCH v10 12/12] iommu/amd: Disable iommu only if amd_iommu=off is specified Baoquan He
[not found] ` <1502267624-7066-1-git-send-email-bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2017-08-09 8:33 ` [PATCH v10 02/12] iommu/amd: add several helper functions Baoquan He
2017-08-09 8:33 ` Baoquan He [this message]
2017-08-09 8:33 ` [PATCH v10 08/12] iommu: Add is_attach_deferred call-back to iommu-ops Baoquan He
2017-08-15 16:18 ` [PATCH v10 00/12] Fix the on-flight DMA issue on system with amd iommu Joerg Roedel
[not found] ` <20170815161810.GI2853-l3A5Bk7waGM@public.gmane.org>
2017-08-16 1:31 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502267624-7066-5-git-send-email-bhe@redhat.com \
--to=bhe-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=jroedel-l3A5Bk7waGM@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).