Linux IOMMU Development
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: <joro@8bytes.org>, <will@kernel.org>, <robin.murphy@arm.com>
Cc: iommu@lists.linux-foundation.org, linuxarm@huawei.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/7] iommu: Allow iommu_change_dev_def_domain() realloc default domain for same type
Date: Tue, 1 Jun 2021 22:29:37 +0800	[thread overview]
Message-ID: <1622557781-211697-4-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1622557781-211697-1-git-send-email-john.garry@huawei.com>

Allow iommu_change_dev_def_domain() to create a new default domain, keeping
the same as current when type is unset.

Also remove comment about function purpose, which will become stale.

Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/iommu/iommu.c | 54 ++++++++++++++++++++++---------------------
 1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 4d12b607918c..8bf2abb3d4c1 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -3036,6 +3036,7 @@ u32 iommu_sva_get_pasid(struct iommu_sva *handle)
 }
 EXPORT_SYMBOL_GPL(iommu_sva_get_pasid);
 
 /*
  * Changes the default domain of an iommu group that has *only* one device
  *
@@ -3043,16 +3044,13 @@ EXPORT_SYMBOL_GPL(iommu_sva_get_pasid);
  * @prev_dev: The device in the group (this is used to make sure that the device
  *	 hasn't changed after the caller has called this function)
  * @type: The type of the new default domain that gets associated with the group
+ * @new: Allocate new default domain, keeping same type when no type passed
  *
  * Returns 0 on success and error code on failure
  *
- * Note:
- * 1. Presently, this function is called only when user requests to change the
- *    group's default domain type through /sys/kernel/iommu_groups/<grp_id>/type
- *    Please take a closer look if intended to use for other purposes.
  */
 static int iommu_change_dev_def_domain(struct iommu_group *group,
-				       struct device *prev_dev, int type)
+				       struct device *prev_dev, int type, bool new)
 {
 	struct iommu_domain *prev_dom;
 	struct group_device *grp_dev;
@@ -3105,28 +3103,32 @@ static int iommu_change_dev_def_domain(struct iommu_group *group,
 		goto out;
 	}
 
-	dev_def_dom = iommu_get_def_domain_type(dev);
-	if (!type) {
+	if (new && !type) {
+		type = prev_dom->type;
+	} else {
+		dev_def_dom = iommu_get_def_domain_type(dev);
+		if (!type) {
+			/*
+			 * If the user hasn't requested any specific type of domain and
+			 * if the device supports both the domains, then default to the
+			 * domain the device was booted with
+			 */
+			type = dev_def_dom ? : iommu_def_domain_type;
+		} else if (dev_def_dom && type != dev_def_dom) {
+			dev_err_ratelimited(prev_dev, "Device cannot be in %s domain\n",
+					    iommu_domain_type_str(type));
+			ret = -EINVAL;
+			goto out;
+		}
+
 		/*
-		 * If the user hasn't requested any specific type of domain and
-		 * if the device supports both the domains, then default to the
-		 * domain the device was booted with
+		 * Switch to a new domain only if the requested domain type is different
+		 * from the existing default domain type
 		 */
-		type = dev_def_dom ? : iommu_def_domain_type;
-	} else if (dev_def_dom && type != dev_def_dom) {
-		dev_err_ratelimited(prev_dev, "Device cannot be in %s domain\n",
-				    iommu_domain_type_str(type));
-		ret = -EINVAL;
-		goto out;
-	}
-
-	/*
-	 * Switch to a new domain only if the requested domain type is different
-	 * from the existing default domain type
-	 */
-	if (prev_dom->type == type) {
-		ret = 0;
-		goto out;
+		if (prev_dom->type == type) {
+			ret = 0;
+			goto out;
+		}
 	}
 
 	/* Sets group->default_domain to the newly allocated domain */
@@ -3270,7 +3272,7 @@ static int iommu_group_store_type_cb(const char *buf,
 	else
 		return -EINVAL;
 
-	return iommu_change_dev_def_domain(group, dev, type);
+	return iommu_change_dev_def_domain(group, dev, type, false);
 }
 
 static ssize_t iommu_group_store_type(struct iommu_group *group,
-- 
2.26.2

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2021-06-01 14:34 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-01 14:29 [PATCH v3 0/7] iommu: Allow IOVA rcache range be configured John Garry
2021-06-01 14:29 ` [PATCH v3 1/7] iommu: Reactor iommu_group_store_type() John Garry
2021-06-01 14:29 ` [PATCH v3 2/7] iova: Allow rcache range upper limit to be flexible John Garry
2021-06-01 14:29 ` John Garry [this message]
2021-06-01 14:29 ` [PATCH v3 4/7] iova: Add iova_domain_len_is_cached() John Garry
2021-06-01 14:29 ` [PATCH v3 5/7] iova: Add init_iova_domain_ext() John Garry
2021-06-01 14:29 ` [PATCH v3 6/7] iommu: Allow max opt DMA len be set for a group via sysfs John Garry
2021-06-01 14:29 ` [PATCH v3 7/7] dma-iommu: Use init_iova_domain_ext() for IOVA domain init John Garry
2021-06-02  4:37 ` [PATCH v3 0/7] iommu: Allow IOVA rcache range be configured Lu Baolu
2021-06-02  7:48   ` John Garry
2021-06-03  0:39     ` Lu Baolu
2021-06-03  8:00       ` John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1622557781-211697-4-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox