From: John Garry <john.garry@huawei.com>
To: <joro@8bytes.org>, <will@kernel.org>, <dwmw2@infradead.org>,
<baolu.lu@linux.intel.com>, <robin.murphy@arm.com>,
<corbet@lwn.net>
Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxarm@huawei.com, iommu@lists.linux-foundation.org
Subject: [PATCH v14 4/6] iommu/vt-d: Add support for IOMMU default DMA mode build options
Date: Fri, 18 Jun 2021 19:34:16 +0800 [thread overview]
Message-ID: <1624016058-189713-5-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1624016058-189713-1-git-send-email-john.garry@huawei.com>
From: Zhen Lei <thunder.leizhen@huawei.com>
Make IOMMU_DEFAULT_LAZY default for when INTEL_IOMMU config is set,
as is current behaviour.
Also delete global flag intel_iommu_strict:
- In intel_iommu_setup(), call iommu_set_dma_strict(true) directly. Also
remove the print, as iommu_subsys_init() prints the mode and we have
already marked this param as deprecated.
- For cap_caching_mode() check in intel_iommu_setup(), call
iommu_set_dma_strict(true) directly; also reword the accompanying print
with a level downgrade and also add the missing '\n'.
- For Ironlake GPU, again call iommu_set_dma_strict(true) directly and
keep the accompanying print.
[jpg: Remove intel_iommu_strict]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/iommu/Kconfig | 1 +
drivers/iommu/intel/iommu.c | 15 ++++++---------
2 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 0327a942fdb7..c214a36eb2dc 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -94,6 +94,7 @@ choice
prompt "IOMMU default DMA IOTLB invalidation mode"
depends on IOMMU_DMA
+ default IOMMU_DEFAULT_LAZY if INTEL_IOMMU
default IOMMU_DEFAULT_STRICT
help
This option allows an IOMMU DMA IOTLB invalidation mode to be
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 29497113d748..06666f9d8116 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -361,7 +361,6 @@ int intel_iommu_enabled = 0;
EXPORT_SYMBOL_GPL(intel_iommu_enabled);
static int dmar_map_gfx = 1;
-static int intel_iommu_strict;
static int intel_iommu_superpage = 1;
static int iommu_identity_mapping;
static int iommu_skip_te_disable;
@@ -455,8 +454,7 @@ static int __init intel_iommu_setup(char *str)
iommu_dma_forcedac = true;
} else if (!strncmp(str, "strict", 6)) {
pr_warn("intel_iommu=strict deprecated; use iommu.strict=1 instead\n");
- pr_info("Disable batched IOTLB flush\n");
- intel_iommu_strict = 1;
+ iommu_set_dma_strict(true);
} else if (!strncmp(str, "sp_off", 6)) {
pr_info("Disable supported super page\n");
intel_iommu_superpage = 0;
@@ -4382,9 +4380,9 @@ int __init intel_iommu_init(void)
* is likely to be much lower than the overhead of synchronizing
* the virtual and physical IOMMU page-tables.
*/
- if (!intel_iommu_strict && cap_caching_mode(iommu->cap)) {
- pr_warn("IOMMU batching is disabled due to virtualization");
- intel_iommu_strict = 1;
+ if (cap_caching_mode(iommu->cap)) {
+ pr_info_once("IOMMU batching disallowed due to virtualization\n");
+ iommu_set_dma_strict(true);
}
iommu_device_sysfs_add(&iommu->iommu, NULL,
intel_iommu_groups,
@@ -4393,7 +4391,6 @@ int __init intel_iommu_init(void)
}
up_read(&dmar_global_lock);
- iommu_set_dma_strict(intel_iommu_strict);
bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
if (si_domain && !hw_pass_through)
register_memory_notifier(&intel_iommu_memory_nb);
@@ -5702,8 +5699,8 @@ static void quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
} else if (dmar_map_gfx) {
/* we have to ensure the gfx device is idle before we flush */
pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
- intel_iommu_strict = 1;
- }
+ iommu_set_dma_strict(true);
+ }
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
--
2.26.2
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2021-06-18 11:39 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-18 11:34 [PATCH v14 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
2021-06-18 11:34 ` [PATCH v14 1/6] iommu: Deprecate Intel and AMD cmdline methods to enable strict mode John Garry
2021-06-18 13:09 ` Lu Baolu
2021-06-18 11:34 ` [PATCH v14 2/6] iommu: Print strict or lazy mode at init time John Garry
2021-06-18 13:10 ` Lu Baolu
2021-06-18 11:34 ` [PATCH v14 3/6] iommu: Enhance IOMMU default DMA mode build options John Garry
2021-06-18 13:11 ` Lu Baolu
2021-06-18 11:34 ` John Garry [this message]
2021-06-18 13:12 ` [PATCH v14 4/6] iommu/vt-d: Add support for " Lu Baolu
2021-06-18 11:34 ` [PATCH v14 5/6] iommu/amd: " John Garry
2021-06-18 11:34 ` [PATCH v14 6/6] iommu: Remove mode argument from iommu_set_dma_strict() John Garry
2021-06-18 13:13 ` Lu Baolu
2021-06-21 5:17 ` Lu Baolu
2021-06-21 8:12 ` John Garry
2021-06-21 10:00 ` Lu Baolu
2021-06-21 10:34 ` John Garry
2021-06-21 11:59 ` Robin Murphy
2021-06-21 12:08 ` John Garry
2021-06-21 14:32 ` Lu Baolu
2021-06-22 22:25 ` Robin Murphy
2021-06-23 7:21 ` Lu Baolu
2021-06-25 16:41 ` [PATCH v14 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
2021-07-08 9:38 ` joro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1624016058-189713-5-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=baolu.lu@linux.intel.com \
--cc=corbet@lwn.net \
--cc=dwmw2@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox