From: Alex Williamson <alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: joerg.roedel-5C7GfCeVMHo@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
Cc: aik-sLpHqDYs0B2HXe+LvDLADg@public.gmane.org,
benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org
Subject: [PATCH 4/7] intel-iommu: Support IOMMU groups
Date: Tue, 29 May 2012 23:10:28 -0600 [thread overview]
Message-ID: <20120530051027.1543.60760.stgit@bling.home> (raw)
In-Reply-To: <20120530045150.1543.73660.stgit-xdHQ/5r00wBBDLzU/O5InQ@public.gmane.org>
Add IOMMU group support to Intel VT-d code. This driver sets up
devices ondemand, so make use of the add_device/remove_device
callbacks in IOMMU API to manage setting up the groups.
Signed-off-by: Alex Williamson <alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/iommu/intel-iommu.c | 46 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index c62f2df..d42ce10 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4090,6 +4090,50 @@ static int intel_iommu_domain_has_cap(struct iommu_domain *domain,
return 0;
}
+static int intel_iommu_add_device(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_dev *bridge, *dma_pdev = pdev;
+ struct iommu_group *group;
+ int ret;
+
+ if (!device_to_iommu(pci_domain_nr(pdev->bus),
+ pdev->bus->number, pdev->devfn))
+ return -ENODEV;
+
+ bridge = pci_find_upstream_pcie_bridge(pdev);
+ if (bridge) {
+ if (pci_is_pcie(bridge))
+ dma_pdev = pci_get_domain_bus_and_slot(
+ pci_domain_nr(pdev->bus),
+ bridge->subordinate->number, 0);
+ else
+ dma_pdev = bridge;
+ }
+
+ if (!pdev->is_virtfn && PCI_FUNC(pdev->devfn) && iommu_group_mf &&
+ pdev->hdr_type == PCI_HEADER_TYPE_NORMAL)
+ dma_pdev = pci_get_slot(pdev->bus,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
+
+ group = iommu_group_get(&dma_pdev->dev);
+ if (!group) {
+ group = iommu_group_alloc();
+ if (IS_ERR(group))
+ return PTR_ERR(group);
+ }
+
+ ret = iommu_group_add_device(group, dev);
+
+ iommu_group_put(group);
+ return ret;
+}
+
+static void intel_iommu_remove_device(struct device *dev)
+{
+ iommu_group_remove_device(dev);
+}
+
static struct iommu_ops intel_iommu_ops = {
.domain_init = intel_iommu_domain_init,
.domain_destroy = intel_iommu_domain_destroy,
@@ -4099,6 +4143,8 @@ static struct iommu_ops intel_iommu_ops = {
.unmap = intel_iommu_unmap,
.iova_to_phys = intel_iommu_iova_to_phys,
.domain_has_cap = intel_iommu_domain_has_cap,
+ .add_device = intel_iommu_add_device,
+ .remove_device = intel_iommu_remove_device,
.pgsize_bitmap = INTEL_IOMMU_PGSIZES,
};
next prev parent reply other threads:[~2012-05-30 5:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-30 5:10 [PATCH 0/7] IOMMU: Groups support Alex Williamson
[not found] ` <20120530045150.1543.73660.stgit-xdHQ/5r00wBBDLzU/O5InQ@public.gmane.org>
2012-05-30 5:10 ` [PATCH 1/7] driver core: Add iommu_group tracking to struct device Alex Williamson
2012-05-30 5:10 ` [PATCH 2/7] iommu: IOMMU Groups Alex Williamson
2012-05-30 5:10 ` [PATCH 3/7] amd_iommu: Support IOMMU groups Alex Williamson
2012-05-30 5:10 ` Alex Williamson [this message]
2012-05-30 5:10 ` [PATCH 5/7] amd_iommu: Make use of DMA quirks and ACS checks in " Alex Williamson
2012-05-30 5:10 ` [PATCH 6/7] intel-iommu: " Alex Williamson
2012-05-30 5:10 ` [PATCH 7/7] iommu: Remove group_mf Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120530051027.1543.60760.stgit@bling.home \
--to=alex.williamson-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=aik-sLpHqDYs0B2HXe+LvDLADg@public.gmane.org \
--cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
--cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=joerg.roedel-5C7GfCeVMHo@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).