iommu.lists.linux-foundation.org archive mirror
 help / color / mirror / Atom feed
From: Alex Williamson <alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: shangw-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org,
	aik-sLpHqDYs0B2HXe+LvDLADg@public.gmane.org,
	benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
	liuj97-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
	david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org
Subject: [PATCH v2 3/5] pci: export pci_user functions for use by other drivers
Date: Wed, 30 May 2012 14:08:55 -0600	[thread overview]
Message-ID: <20120530200855.31085.941.stgit@bling.home> (raw)
In-Reply-To: <20120530200343.31085.78920.stgit-xdHQ/5r00wBBDLzU/O5InQ@public.gmane.org>

VFIO PCI support will make use of these for user initiated
PCI config accesses.

Signed-off-by: Alex Williamson <alex.williamson-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Acked-by: Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
---

 drivers/pci/access.c |    6 ++++--
 drivers/pci/pci.h    |    7 -------
 include/linux/pci.h  |    8 ++++++++
 3 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 2a58164..ba91a7e 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -162,7 +162,8 @@ int pci_user_read_config_##size						\
 	if (ret > 0)							\
 		ret = -EINVAL;						\
 	return ret;							\
-}
+}									\
+EXPORT_SYMBOL_GPL(pci_user_read_config_##size);
 
 /* Returns 0 on success, negative values indicate error. */
 #define PCI_USER_WRITE_CONFIG(size,type)				\
@@ -181,7 +182,8 @@ int pci_user_write_config_##size					\
 	if (ret > 0)							\
 		ret = -EINVAL;						\
 	return ret;							\
-}
+}									\
+EXPORT_SYMBOL_GPL(pci_user_write_config_##size);
 
 PCI_USER_READ_CONFIG(byte, u8)
 PCI_USER_READ_CONFIG(word, u16)
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index e494347..f2dcc46 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -86,13 +86,6 @@ static inline bool pci_is_bridge(struct pci_dev *pci_dev)
 	return !!(pci_dev->subordinate);
 }
 
-extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
-extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
-extern int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
-extern int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
-extern int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
-extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
-
 struct pci_vpd_ops {
 	ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
 	ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 2fa696e..2274ff1 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -777,6 +777,14 @@ static inline int pci_write_config_dword(const struct pci_dev *dev, int where,
 	return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
 }
 
+/* user-space driven config access */
+int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
+int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
+int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
+int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
+int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
+int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
+
 int __must_check pci_enable_device(struct pci_dev *dev);
 int __must_check pci_enable_device_io(struct pci_dev *dev);
 int __must_check pci_enable_device_mem(struct pci_dev *dev);

  parent reply	other threads:[~2012-05-30 20:08 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-30 20:08 [PATCH v2 0/5] PCI: Prep for VFIO and IOMMU Groups Alex Williamson
     [not found] ` <20120530200343.31085.78920.stgit-xdHQ/5r00wBBDLzU/O5InQ@public.gmane.org>
2012-05-30 20:08   ` [PATCH v2 1/5] pci: Add PCI DMA source ID quirk Alex Williamson
2012-05-30 20:08   ` [PATCH v2 2/5] pci: Add ACS validation utility Alex Williamson
2012-05-30 20:08   ` Alex Williamson [this message]
2012-05-30 20:09   ` [PATCH v2 4/5] pci: Create common pcibios_err_to_errno Alex Williamson
2012-05-30 20:09   ` [PATCH v2 5/5] pci: Misc pci_reg additions Alex Williamson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120530200855.31085.941.stgit@bling.home \
    --to=alex.williamson-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=aik-sLpHqDYs0B2HXe+LvDLADg@public.gmane.org \
    --cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
    --cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org \
    --cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=liuj97-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=shangw-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).