From: Baoquan He <bhe-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
Cc: iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] iommu/amd: Suppress IO_PAGE_FAULTs in kdump kernel
Date: Fri, 23 Jun 2017 19:43:10 +0800 [thread overview]
Message-ID: <20170623114310.GE20618@x1> (raw)
In-Reply-To: <20170623085719.GD20618@x1>
Hi Joerg,
On 06/23/17 at 04:57pm, Baoquan He wrote:
> Hi dear Joerg,
>
> On 06/16/17 at 10:15am, Joerg Roedel wrote:
> > From: Joerg Roedel <jroedel-l3A5Bk7waGM@public.gmane.org>
> >
> > When booting into a kdump kernel, suppress IO_PAGE_FAULTs by
> > default for all devices. But allow the faults again when a
> > domain is assigned to a device.
>
> I have two bugs at hand reported by customer, saying their system hang
> with amd iommu on. I remember I borrowed the system and found it hang very
> early so that no one knew what's happened. One time it printed several lines
> of boot message and I found it's amd iommu system, adding amd_iommu=off
> to make the system boot normally.
>
> And with the kdump fix of amd iommu patchset applied, kdump kernel boots
> well. So maybe suppressing the fault message is not enough.
Do you think whether it's necessary to continue my kdump fix of amd iommu
patchset? Seems my last post was in Jan this year. I know you are very
busy on fixing bugs and reviewing tons of patches. Without your
guidance and reviewing, I absolutely can't make it. So I would like to
hear your suggestions and idea.
I focused on kaslr issues recently, now most of them have been
fixed. My boss discussed with me about the next plan. If you have other
plan, I can sync it to our team about the status of upstream.
Thanks
Baoquan
> > ---
> > drivers/iommu/amd_iommu.c | 3 ++-
> > drivers/iommu/amd_iommu_init.c | 9 +++++++++
> > drivers/iommu/amd_iommu_types.h | 1 +
> > 3 files changed, 12 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
> > index 80efa72..623ab53 100644
> > --- a/drivers/iommu/amd_iommu.c
> > +++ b/drivers/iommu/amd_iommu.c
> > @@ -2050,7 +2050,8 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
> > flags |= tmp;
> > }
> >
> > - flags &= ~(0xffffUL);
> > +
> > + flags &= ~(DTE_FLAG_SA | 0xffffULL);
> > flags |= domain->id;
> >
> > amd_iommu_dev_table[devid].data[1] = flags;
> > diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
> > index 5a11328..d9f5ddd 100644
> > --- a/drivers/iommu/amd_iommu_init.c
> > +++ b/drivers/iommu/amd_iommu_init.c
> > @@ -29,6 +29,7 @@
> > #include <linux/export.h>
> > #include <linux/iommu.h>
> > #include <linux/kmemleak.h>
> > +#include <linux/crash_dump.h>
> > #include <asm/pci-direct.h>
> > #include <asm/iommu.h>
> > #include <asm/gart.h>
> > @@ -1898,6 +1899,14 @@ static void init_device_table_dma(void)
> > for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
> > set_dev_entry_bit(devid, DEV_ENTRY_VALID);
> > set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
> > + /*
> > + * In kdump kernels in-flight DMA from the old kernel might
> > + * cause IO_PAGE_FAULTs. There are no reports that a kdump
> > + * actually failed because of that, so just disable fault
> > + * reporting in the hardware to get rid of the messages
> > + */
> > + if (is_kdump_kernel())
> > + set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT);
> > }
> > }
> >
> > diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
> > index 4de8f41..4cad9b3 100644
> > --- a/drivers/iommu/amd_iommu_types.h
> > +++ b/drivers/iommu/amd_iommu_types.h
> > @@ -322,6 +322,7 @@
> > #define IOMMU_PTE_IW (1ULL << 62)
> >
> > #define DTE_FLAG_IOTLB (1ULL << 32)
> > +#define DTE_FLAG_SA (1ULL << 34)
> > #define DTE_FLAG_GV (1ULL << 55)
> > #define DTE_FLAG_MASK (0x3ffULL << 32)
> > #define DTE_GLX_SHIFT (56)
> > --
> > 2.7.4
> >
> > _______________________________________________
> > iommu mailing list
> > iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org
> > https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2017-06-23 11:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-16 8:15 [PATCH] iommu/amd: Suppress IO_PAGE_FAULTs in kdump kernel Joerg Roedel
[not found] ` <1497600901-8993-1-git-send-email-joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2017-06-23 8:57 ` Baoquan He
2017-06-23 11:43 ` Baoquan He [this message]
2017-06-26 10:07 ` Joerg Roedel
[not found] ` <20170626100742.GC3737-l3A5Bk7waGM@public.gmane.org>
2017-06-26 10:25 ` Baoquan He
2017-07-20 13:17 ` Baoquan He
2017-07-20 13:27 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170623114310.GE20618@x1 \
--to=bhe-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
--cc=jroedel-l3A5Bk7waGM@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).