Re: [PATCH 00/10] IOASID extensions for guest SVA

[Jacob Pan <jacob.jun.pan@linux.intel.com>]

On Thu, 2 Apr 2020 14:26:33 +0200
Jean-Philippe Brucker <jean-philippe@linaro.org> wrote:

> On Wed, Apr 01, 2020 at 04:38:42PM -0700, Jacob Pan wrote:
> > On Wed, 1 Apr 2020 16:03:01 +0200
> > Jean-Philippe Brucker <jean-philippe@linaro.org> wrote:
> >   
> > > Hi Jacob,
> > > 
> > > On Wed, Mar 25, 2020 at 10:55:21AM -0700, Jacob Pan wrote:  
> > > > IOASID was introduced in v5.5 as a generic kernel allocator
> > > > service for both PCIe Process Address Space ID (PASID) and ARM
> > > > SMMU's Sub Stream ID. In addition to basic ID allocation,
> > > > ioasid_set was introduced as a token that is shared by a group
> > > > of IOASIDs. This set token can be used for permission checking
> > > > but lack of some features needed by guest Shared Virtual
> > > > Address (SVA). In addition, IOASID support for life cycle
> > > > management is needed among multiple users.
> > > > 
> > > > This patchset introduces two extensions to the IOASID code,
> > > > 1. IOASID set operations
> > > > 2. Notifications for IOASID state synchronization    
> > > 
> > > My main concern with this series is patch 7 changing the spinlock
> > > to a mutex, which prevents SVA from calling ioasid_free() from
> > > the RCU callback of MMU notifiers. Could we use atomic notifiers,
> > > or do the FREE notification another way?
> > >   
> > Maybe I am looking at the wrong code, I thought
> > mmu_notifier_ops.free_notifier() is called outside spinlock with
> > call_srcu(), which will be invoked in the thread context.
> > in mmu_notifier.c mmu_notifier_put()
> > 	spin_unlock(&mm->notifier_subscriptions->lock);
> > 
> > 	call_srcu(&srcu, &subscription->rcu,
> > mmu_notifier_free_rcu);  
> 
> free_notifier() is called from RCU callback, and according to
> Documentation/RCU/checklist.txt:
> 
> 5.      If call_rcu() or call_srcu() is used, the callback function
> will be called from softirq context.  In particular, it cannot block.
> 
> When applying the patch I get the sleep-in-atomic warning:
> 
> [   87.861793] BUG: sleeping function called from invalid context at
> kernel/locking/mutex.c:935 [   87.863293] in_atomic(): 1,
> irqs_disabled(): 0, non_block: 0, pid: 74, name: kworker/6:1
> [   87.863993] 2 locks held by kworker/6:1/74: [   87.864493]  #0:
> ffffff885ac12538 ((wq_completion)rcu_gp){+.+.}-{0:0}, at:
> process_one_work+0x740/0x1880 [   87.865593]  #1: ffffff88591efd30
> ((work_completion)(&sdp->work)){+.+.}-{0:0}, at:
> process_one_work+0x740/0x1880 [   87.866993] CPU: 6 PID: 74 Comm:
> kworker/6:1 Not tainted 5.6.0-next-20200331+ #121 [   87.867393]
> Hardware name: FVP Base (DT) [   87.867893] Workqueue: rcu_gp
> srcu_invoke_callbacks [   87.868393] Call trace: [   87.868793]
> dump_backtrace+0x0/0x310 [   87.869293]  show_stack+0x14/0x20
> [   87.869693]  dump_stack+0x124/0x180 [   87.870193]
> ___might_sleep+0x2ac/0x428 [   87.870693]  __might_sleep+0x88/0x168
> [   87.871094]  __mutex_lock+0xa0/0x1270
> [   87.871593]  mutex_lock_nested+0x1c/0x28
> [   87.872093]  ioasid_free+0x28/0x48
> [   87.872493]  io_mm_free+0x1d0/0x608
> [   87.872993]  mmu_notifier_free_rcu+0x74/0xe8
> [   87.873393]  srcu_invoke_callbacks+0x1d0/0x2c8
> [   87.873893]  process_one_work+0x858/0x1880
> [   87.874393]  worker_thread+0x314/0xcd0
> [   87.874793]  kthread+0x318/0x400
> [   87.875293]  ret_from_fork+0x10/0x18
> 
You are right, I was reading call_srcu comments too fast. I guess
rcu callbacks are still in softirq not offloaded to kernel threads.

 *
 * The callback will be invoked from process context, but must
 *  nevertheless be fast and must not block.
 */
So even atomic works in principle but not a good idea since it may take
a long time.

> > 
> > Anyway, if we have to use atomic. I tried atomic notifier first,
> > there are two subscribers to the free event on x86.
> > 1. IOMMU
> > 2. KVM
> > 
> > For #1, the problem is that in the free operation, VT-d driver
> > needs to do a lot of clean up in thread context.
> > - hold a mutex to traverse a list of devices
> > - clear PASID entry and flush cache
> > 
> > For #2, KVM might be able to deal with spinlocks for updating VMCS
> > PASID translation table. +Hao
> > 
> > Perhaps two solutions I can think of:
> > 1. Use a cyclic IOASID allocator. The main reason of clean up at
> > free is to prevent race with IOASID alloc. Similar to PID, 2M IOASID
> > will take long time overflow. Then we can use atomic notifier and a
> > deferred workqueue to do IOMMU cleanup. The downside is a large and
> > growing PASID table, may not be a performance issue since it has
> > TLB.  
> 
> That might be a problem for SMMU, which has 1024 * 64kB leaf PASID
> tables, for a total of 64MB per endpoint if there is too much
> fragmentation in the IOASID space.
> 
OK. Not an option here :(

> > 2. Let VFIO ensure free always happen after unbind. Then there is no
> > need to do cleanup. But that requires VFIO to keep track of all the
> > PASIDs within each VM. When the VM terminates, VFIO is responsible
> > for the clean up. That was Yi's original proposal. I also tried to
> > provide an IOASID set iterator for VFIO to free the IOASIDs within
> > each VM/set, but the private data belongs to IOMMU driver.  
> 
> Not really my place to comment on this, but I find it nicer to use the
> same gpasid_unbind() path when VFIO frees a PASID as when the guest
> explicitly unbinds before freeing. 
> 

Might be the only option now.

Thanks,

Jacob

> Thanks,
> Jean
> 

[Jacob Pan]
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu