From: "jroedel@suse.de" <jroedel@suse.de>
To: "Merger, Edgar [AUTOSOL/MAS/AUGS]" <Edgar.Merger@emerson.com>
Cc: "iommu@lists.linux-foundation.org" <iommu@lists.linux-foundation.org>
Subject: Re: [EXTERNAL] Re: amdgpu error whenever IOMMU is enabled
Date: Wed, 4 Nov 2020 11:14:54 +0100 [thread overview]
Message-ID: <20201104101454.GR22179@suse.de> (raw)
In-Reply-To: <MWHPR10MB13109574BDA0F1D8219A225C89EF0@MWHPR10MB1310.namprd10.prod.outlook.com>
On Wed, Nov 04, 2020 at 09:21:35AM +0000, Merger, Edgar [AUTOSOL/MAS/AUGS] wrote:
> AMD-Vi: Completion-Wait loop timed out is at [65499.964105] but amdgpu-error is at [ 52.772273], hence much earlier.
Yes, but it could be the same underlying reason.
> Have not tried to use an upstream kernel yet. Which one would you recommend?
For a first try, use 5.9.3. If it reproduces there, please try booting
with "pci=noats" on the kernel command line.
Please also send me the output of 'lspci -vvv' and 'lspci -t' of the
machine where this happens.
Regards,
Joerg
>
> As far as inconsistencies in the PCI-setup is concerned, the only thing that I know of right now is that we haven´t entered a PCI subsystem vendor and device ID yet. It is still "Advanced Micro Devices". We will change that soon to "General Electric" or "Emerson".
>
> Best regards,
> Edgar
>
> -----Original Message-----
> From: jroedel@suse.de <jroedel@suse.de>
> Sent: Mittwoch, 4. November 2020 09:53
> To: Merger, Edgar [AUTOSOL/MAS/AUGS] <Edgar.Merger@emerson.com>
> Cc: iommu@lists.linux-foundation.org
> Subject: [EXTERNAL] Re: amdgpu error whenever IOMMU is enabled
>
> Hi Edgar,
>
> On Fri, Oct 30, 2020 at 02:26:23PM +0000, Merger, Edgar [AUTOSOL/MAS/AUGS] wrote:
> > With one board we have a boot-problem that is reproducible at every ~50 boot.
> > The system is accessible via ssh and works fine except for the
> > Graphics. The graphics is off. We don´t see a screen. Please see
> > attached “dmesg.log”. From [52.772273] onwards the kernel reports
> > drm/amdgpu errors. It even tries to reset the GPU but that fails too.
> > I tried to reset amdgpu also by command “sudo cat /sys/kernel/debug/dri/N/amdgpu_gpu_recover”. That did not help either.
>
> Can you reproduce the problem with an upstream kernel too?
>
> These messages in dmesg indicate some problem in the platform setup:
>
> AMD-Vi: Completion-Wait loop timed out
>
> Might there be some inconsistencies in the PCI setup between the bridges and the endpoints or something?
>
> Regards,
>
> Joerg
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
next prev parent reply other threads:[~2020-11-04 10:15 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-30 14:26 amdgpu error whenever IOMMU is enabled Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-03 9:21 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-04 8:53 ` jroedel
2020-11-04 9:21 ` [EXTERNAL] " Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-04 10:14 ` jroedel [this message]
2020-11-04 14:19 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-04 14:35 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-05 11:15 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-05 11:58 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-05 12:32 ` jroedel
2020-11-06 5:51 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-06 12:18 ` jroedel
2020-11-06 13:03 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-06 14:06 ` jroedel
2020-11-06 14:28 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-06 14:32 ` jroedel
2020-11-09 5:33 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2020-11-23 6:41 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
2021-01-15 8:18 ` jroedel
2021-01-15 13:15 ` Merger, Edgar [AUTOSOL/MAS/AUGS]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201104101454.GR22179@suse.de \
--to=jroedel@suse.de \
--cc=Edgar.Merger@emerson.com \
--cc=iommu@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox