Linux IOMMU Development
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>,
	iommu@lists.linux-foundation.org, xen-devel@lists.xenproject.org,
	Claire Chang <tientzu@chromium.org>,
	linuxppc-dev@lists.ozlabs.org,
	Dongli Zhang <dongli.zhang@oracle.com>
Subject: [PATCH 03/14] swiotlb: move orig addr and size validation into swiotlb_bounce
Date: Mon,  1 Mar 2021 08:44:25 +0100	[thread overview]
Message-ID: <20210301074436.919889-4-hch@lst.de> (raw)
In-Reply-To: <20210301074436.919889-1-hch@lst.de>

Move the code to find and validate the original buffer address and size
from the callers into swiotlb_bounce.  This means a tiny bit of extra
work in the swiotlb_map path, but avoids code duplication and a leads to
a better code structure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 kernel/dma/swiotlb.c | 59 +++++++++++++++++---------------------------
 1 file changed, 23 insertions(+), 36 deletions(-)

diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index 03aa614565e417..a9063092f6f566 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -460,12 +460,25 @@ void __init swiotlb_exit(void)
 /*
  * Bounce: copy the swiotlb buffer from or back to the original dma location
  */
-static void swiotlb_bounce(phys_addr_t orig_addr, phys_addr_t tlb_addr,
-			   size_t size, enum dma_data_direction dir)
+static void swiotlb_bounce(struct device *dev, phys_addr_t tlb_addr, size_t size,
+		enum dma_data_direction dir)
 {
+	int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;
+	size_t alloc_size = io_tlb_alloc_size[index];
+	phys_addr_t orig_addr = io_tlb_orig_addr[index];
 	unsigned long pfn = PFN_DOWN(orig_addr);
 	unsigned char *vaddr = phys_to_virt(tlb_addr);
 
+	if (orig_addr == INVALID_PHYS_ADDR)
+		return;
+
+	if (size > alloc_size) {
+		dev_WARN_ONCE(dev, 1,
+			"Buffer overflow detected. Allocation size: %zu. Mapping size: %zu.\n",
+			alloc_size, size);
+		size = alloc_size;
+	}
+
 	if (PageHighMem(pfn_to_page(pfn))) {
 		/* The buffer does not have a mapping.  Map it in and copy */
 		unsigned int offset = orig_addr & ~PAGE_MASK;
@@ -644,21 +657,10 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
 	tlb_addr = slot_addr(io_tlb_start, index) + offset;
 	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
 	    (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
-		swiotlb_bounce(orig_addr, tlb_addr, mapping_size, DMA_TO_DEVICE);
+		swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
 	return tlb_addr;
 }
 
-static void validate_sync_size_and_truncate(struct device *hwdev, size_t alloc_size, size_t *size)
-{
-	if (*size > alloc_size) {
-		/* Warn and truncate mapping_size */
-		dev_WARN_ONCE(hwdev, 1,
-			"Attempt for buffer overflow. Original size: %zu. Mapping size: %zu.\n",
-			alloc_size, *size);
-		*size = alloc_size;
-	}
-}
-
 /*
  * tlb_addr is the physical address of the bounce buffer to unmap.
  */
@@ -669,19 +671,15 @@ void swiotlb_tbl_unmap_single(struct device *hwdev, phys_addr_t tlb_addr,
 	unsigned long flags;
 	unsigned int offset = swiotlb_align_offset(hwdev, tlb_addr);
 	int index = (tlb_addr - offset - io_tlb_start) >> IO_TLB_SHIFT;
-	phys_addr_t orig_addr = io_tlb_orig_addr[index];
-	size_t alloc_size = io_tlb_alloc_size[index];
-	int i, count, nslots = nr_slots(alloc_size + offset);
-
-	validate_sync_size_and_truncate(hwdev, alloc_size, &mapping_size);
+	int nslots = nr_slots(io_tlb_alloc_size[index] + offset);
+	int count, i;
 
 	/*
 	 * First, sync the memory before unmapping the entry
 	 */
-	if (orig_addr != INVALID_PHYS_ADDR &&
-	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
-	    ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
-		swiotlb_bounce(orig_addr, tlb_addr, mapping_size, DMA_FROM_DEVICE);
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
+	    (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
+		swiotlb_bounce(hwdev, tlb_addr, mapping_size, DMA_FROM_DEVICE);
 
 	/*
 	 * Return the buffer to the free list by setting the corresponding
@@ -721,27 +719,16 @@ void swiotlb_tbl_sync_single(struct device *hwdev, phys_addr_t tlb_addr,
 			     size_t size, enum dma_data_direction dir,
 			     enum dma_sync_target target)
 {
-	int index = (tlb_addr - io_tlb_start) >> IO_TLB_SHIFT;
-	size_t alloc_size = io_tlb_alloc_size[index];
-	phys_addr_t orig_addr = io_tlb_orig_addr[index];
-
-	if (orig_addr == INVALID_PHYS_ADDR)
-		return;
-
-	validate_sync_size_and_truncate(hwdev, alloc_size, &size);
-
 	switch (target) {
 	case SYNC_FOR_CPU:
 		if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
-			swiotlb_bounce(orig_addr, tlb_addr,
-				       size, DMA_FROM_DEVICE);
+			swiotlb_bounce(hwdev, tlb_addr, size, DMA_FROM_DEVICE);
 		else
 			BUG_ON(dir != DMA_TO_DEVICE);
 		break;
 	case SYNC_FOR_DEVICE:
 		if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
-			swiotlb_bounce(orig_addr, tlb_addr,
-				       size, DMA_TO_DEVICE);
+			swiotlb_bounce(hwdev, tlb_addr, size, DMA_TO_DEVICE);
 		else
 			BUG_ON(dir != DMA_FROM_DEVICE);
 		break;
-- 
2.29.2

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

  parent reply	other threads:[~2021-03-01  7:45 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-01  7:44 swiotlb cleanups v2 Christoph Hellwig
2021-03-01  7:44 ` [PATCH 01/14] powerpc/svm: stop using io_tlb_start Christoph Hellwig
2021-03-01  7:44 ` [PATCH 02/14] swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single Christoph Hellwig
2021-03-17  0:24   ` Konrad Rzeszutek Wilk
2021-03-01  7:44 ` Christoph Hellwig [this message]
2021-03-17  0:30   ` [PATCH 03/14] swiotlb: move orig addr and size validation into swiotlb_bounce Konrad Rzeszutek Wilk
2021-03-01  7:44 ` [PATCH 04/14] swiotlb: split swiotlb_tbl_sync_single Christoph Hellwig
2021-03-01  7:44 ` [PATCH 05/14] xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer Christoph Hellwig
2021-03-01  7:44 ` [PATCH 06/14] xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported Christoph Hellwig
2021-03-01  7:44 ` [PATCH 07/14] xen-swiotlb: remove xen_set_nslabs Christoph Hellwig
2021-03-01  7:44 ` [PATCH 08/14] xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs Christoph Hellwig
2021-03-01  7:44 ` [PATCH 09/14] swiotlb: lift the double initialization protection from xen-swiotlb Christoph Hellwig
2021-03-01  7:44 ` [PATCH 10/14] xen-swiotlb: split xen_swiotlb_init Christoph Hellwig
2021-03-01  7:44 ` [PATCH 11/14] xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup Christoph Hellwig
2021-03-01  7:44 ` [PATCH 12/14] swiotlb: move global variables into a new io_tlb_mem structure Christoph Hellwig
2021-03-17 13:42   ` Konrad Rzeszutek Wilk
2021-03-17 13:53     ` Christoph Hellwig
2021-03-17 17:51       ` Konrad Rzeszutek Wilk
2021-03-17 17:57         ` Christoph Hellwig
2021-03-17 18:18           ` Konrad Rzeszutek Wilk
2021-03-01  7:44 ` [PATCH 13/14] swiotlb: dynamically allocate io_tlb_default_mem Christoph Hellwig
2021-03-01  7:44 ` [PATCH 14/14] swiotlb: remove swiotlb_nr_tbl Christoph Hellwig
2021-03-11 16:52 ` swiotlb cleanups v2 Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210301074436.919889-4-hch@lst.de \
    --to=hch@lst.de \
    --cc=dongli.zhang@oracle.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=konrad.wilk@oracle.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=tientzu@chromium.org \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox