Linux IOMMU Development
 help / color / mirror / Atom feed
From: Jerry Snitselaar <jsnitsel@redhat.com>
To: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux.dev,
	joro@8bytes.org, will@kernel.org, vasant.hegde@amd.com,
	jon.grimm@amd.com
Subject: Re: [PATCH 2/2] iommu/amd: Add support for AVIC when SNP is enabled
Date: Tue, 26 Jul 2022 08:32:27 -0700	[thread overview]
Message-ID: <20220726153227.caqf6hagmwu727ls@cantor> (raw)
In-Reply-To: <20220726134348.6438-3-suravee.suthikulpanit@amd.com>

On Tue, Jul 26, 2022 at 08:43:48AM -0500, Suravee Suthikulpanit wrote:
> In order to support AVIC on SNP-enabled system, The IOMMU driver needs to
> check EFR2[SNPAVICSup] and enables the support by setting SNPAVICEn bit
> in the IOMMU control register (MMIO offset 18h).
> 
> For detail, please see section "SEV-SNP Guest Virtual APIC Support" of the
> AMD I/O Virtualization Technology (IOMMU) Specification.
> (https://www.amd.com/system/files/TechDocs/48882_IOMMU.pdf)
> 
> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

Is this a typo in the 3.06 spec for SNPAVIC_EN?

"001b-111b = Reserved."

Or I guess maybe there is a newer revision that isn't available yet
that describes 001b?

Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>

> ---
>  drivers/iommu/amd/amd_iommu_types.h |  7 +++++++
>  drivers/iommu/amd/init.c            | 11 ++++++++++-
>  2 files changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/amd/amd_iommu_types.h b/drivers/iommu/amd/amd_iommu_types.h
> index 3c1205ba636a..5b1019dab328 100644
> --- a/drivers/iommu/amd/amd_iommu_types.h
> +++ b/drivers/iommu/amd/amd_iommu_types.h
> @@ -103,6 +103,12 @@
>  #define FEATURE_GLXVAL_SHIFT	14
>  #define FEATURE_GLXVAL_MASK	(0x03ULL << FEATURE_GLXVAL_SHIFT)
>  
> +/* Extended Feature 2 Bits */
> +#define FEATURE_SNPAVICSUP_SHIFT	5
> +#define FEATURE_SNPAVICSUP_MASK		(0x07ULL << FEATURE_SNPAVICSUP_SHIFT)
> +#define FEATURE_SNPAVICSUP_GAM(x) \
> +	((x & FEATURE_SNPAVICSUP_MASK) >> FEATURE_SNPAVICSUP_SHIFT == 0x1)
> +
>  /* Note:
>   * The current driver only support 16-bit PASID.
>   * Currently, hardware only implement upto 16-bit PASID
> @@ -165,6 +171,7 @@
>  #define CONTROL_GAINT_EN	29
>  #define CONTROL_XT_EN		50
>  #define CONTROL_INTCAPXT_EN	51
> +#define CONTROL_SNPAVIC_EN	61
>  
>  #define CTRL_INV_TO_MASK	(7 << CONTROL_INV_TIMEOUT)
>  #define CTRL_INV_TO_NONE	0
> diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
> index 4cd94d716122..6bbaf6b971e8 100644
> --- a/drivers/iommu/amd/init.c
> +++ b/drivers/iommu/amd/init.c
> @@ -2794,13 +2794,22 @@ static void enable_iommus_vapic(void)
>  		return;
>  	}
>  
> -	/* Enabling GAM support */
> +	if (amd_iommu_snp_en &&
> +	    !FEATURE_SNPAVICSUP_GAM(amd_iommu_efr2)) {
> +		pr_warn("Force to disable Virtual APIC due to SNP\n");
> +		amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY_GA;
> +		return;
> +	}
> +
> +	/* Enabling GAM and SNPAVIC support */
>  	for_each_iommu(iommu) {
>  		if (iommu_init_ga_log(iommu) ||
>  		    iommu_ga_log_enable(iommu))
>  			return;
>  
>  		iommu_feature_enable(iommu, CONTROL_GAM_EN);
> +		if (amd_iommu_snp_en)
> +			iommu_feature_enable(iommu, CONTROL_SNPAVIC_EN);
>  	}
>  
>  	amd_iommu_irq_ops.capability |= (1 << IRQ_POSTING_CAP);
> -- 
> 2.34.1
> 


  reply	other threads:[~2022-07-26 15:32 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-26 13:43 [PATCH 0/2] iommu/amd: Misc Update for Virtual APIC support Suravee Suthikulpanit
2022-07-26 13:43 ` [PATCH 1/2] iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement Suravee Suthikulpanit
2022-07-26 15:28   ` Jerry Snitselaar
2022-07-26 13:43 ` [PATCH 2/2] iommu/amd: Add support for AVIC when SNP is enabled Suravee Suthikulpanit
2022-07-26 15:32   ` Jerry Snitselaar [this message]
2022-07-27  2:39     ` Suravee Suthikulpanit
2022-07-29  8:31 ` [PATCH 0/2] iommu/amd: Misc Update for Virtual APIC support Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220726153227.caqf6hagmwu727ls@cantor \
    --to=jsnitsel@redhat.com \
    --cc=iommu@lists.linux.dev \
    --cc=jon.grimm@amd.com \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=suravee.suthikulpanit@amd.com \
    --cc=vasant.hegde@amd.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox