From: Jingqi Liu <Jingqi.liu@intel.com>
To: iommu@lists.linux.dev, Lu Baolu <baolu.lu@linux.intel.com>,
Tian Kevin <kevin.tian@intel.com>, Joerg Roedel <joro@8bytes.org>,
Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>
Cc: linux-kernel@vger.kernel.org, Jingqi Liu <Jingqi.liu@intel.com>
Subject: [PATCH 0/5] iommu/vt-d: debugfs: Enhancements to IOMMU debugfs
Date: Sun, 25 Jun 2023 23:04:37 +0800 [thread overview]
Message-ID: <20230625150442.42197-1-Jingqi.liu@intel.com> (raw)
The original debugfs only dumps all IOMMU page tables without pasid
supported. It traverses all devices on the pci bus, then dumps all page
tables based on device domains. This traversal is from software
perspective.
This series dumps page tables by traversing root tables, context tables,
pasid directories and pasid tables from hardware perspective. By
specifying source identifier and PASID, it supports dumping specified
page table or all page tables in legacy mode or scalable mode.
For a device that only supports legacy mode, specify the source
identifier, and search the root table and context table to dump its
page table. It does not support to specify PASID.
For a device that supports scalable mode, specify a
{source identifier, PASID} pair and search the root table, context table
and pasid table to dump its page table. If the pasid is not specified,
it is set to RID_PASID.
Switch to dump all page tables by specifying "auto".
Examples are as follows:
1) Dump the page table of device "00:1f.0" that only supports legacy
mode.
$ sudo echo 00:1f.0 >
/sys/kernel/debug/iommu/intel/domain_translation_struct
$ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct
Device 0000:00:1f.0 @0x105407000
IOVA_PFN PML5E PML4E
0x0000000000000 | 0x0000000000000000 0x0000000105408003
0x0000000000001 | 0x0000000000000000 0x0000000105408003
0x0000000000002 | 0x0000000000000000 0x0000000105408003
0x0000000000003 | 0x0000000000000000 0x0000000105408003
PDPE PDE PTE
0x0000000105409003 0x000000010540a003 0x0000000000000003
0x0000000105409003 0x000000010540a003 0x0000000000001003
0x0000000105409003 0x000000010540a003 0x0000000000002003
0x0000000105409003 0x000000010540a003 0x0000000000003003
[...]
2) Dump the page table of device "00:0a.0" with pasid "2".
$ sudo echo 00:0a.0,2 >
/sys/kernel/debug/iommu/intel/domain_translation_struct
$ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct
Device 0000:00:0a.0 with pasid 2 @0x1083d7000
IOVA_PFN PML5E PML4E
0x0000000000000 | 0x0000000000000000 0x0000000106aaa003
0x0000000000001 | 0x0000000000000000 0x0000000106aaa003
0x0000000000002 | 0x0000000000000000 0x0000000106aaa003
0x0000000000003 | 0x0000000000000000 0x0000000106aaa003
PDPE PDE PTE
0x000000010a819003 0x000000010a7aa003 0x0000000129800003
0x000000010a819003 0x000000010a7aa003 0x0000000129801003
0x000000010a819003 0x000000010a7aa003 0x0000000129802003
0x000000010a819003 0x000000010a7aa003 0x0000000129803003
[...]
3) Dump all page tables:
$ sudo echo "auto" >
/sys/kernel/debug/iommu/intel/domain_translation_struct
$ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct
[...]
Device 0000:00:02.0 @0x103072000
IOVA_PFN PML5E PML4E
0x000000008d800 | 0x0000000000000000 0x0000000103073003
0x000000008d801 | 0x0000000000000000 0x0000000103073003
PDPE PDE PTE
0x0000000103074003 0x0000000103075003 0x000000008d800003
0x0000000103074003 0x0000000103075003 0x000000008d801003
[...]
Device 0000:00:0a.0 with pasid 2 @0x10a0b6000
IOVA_PFN PML5E PML4E
0x0000000000000 | 0x0000000000000000 0x00000001072d2003
0x0000000000001 | 0x0000000000000000 0x00000001072d2003
PDPE PDE PTE
0x0000000107d6e003 0x00000001161d4003 0x00000001bdc00003
0x0000000107d6e003 0x00000001161d4003 0x00000001bdc01003
[...]
Thanks,
Jingqi
Jingqi Liu (5):
iommu/vt-d: debugfs: Define domain_translation_struct file ops
iommu/vt-d: debugfs: Support specifying source identifier and PASID
iommu/vt-d: debugfs: Dump the corresponding page table of a pasid
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Dump entry pointing to huge page
drivers/iommu/intel/debugfs.c | 361 ++++++++++++++++++++++++++++++----
1 file changed, 326 insertions(+), 35 deletions(-)
--
2.21.3
next reply other threads:[~2023-06-25 15:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-25 15:04 Jingqi Liu [this message]
2023-06-25 15:04 ` [PATCH 1/5] iommu/vt-d: debugfs: Define domain_translation_struct file ops Jingqi Liu
2023-06-25 15:04 ` [PATCH 2/5] iommu/vt-d: debugfs: Support specifying source identifier and PASID Jingqi Liu
2023-06-25 15:04 ` [PATCH 3/5] iommu/vt-d: debugfs: Dump the corresponding page table of a pasid Jingqi Liu
2023-06-25 15:04 ` [PATCH 4/5] iommu/vt-d: debugfs: Support dumping a specified page table Jingqi Liu
2023-06-25 15:04 ` [PATCH 5/5] iommu/vt-d: debugfs: Dump entry pointing to huge page Jingqi Liu
2023-07-03 7:15 ` [PATCH 0/5] iommu/vt-d: debugfs: Enhancements to IOMMU debugfs Tian, Kevin
2023-07-03 14:37 ` Liu, Jingqi
2023-07-04 7:54 ` Tian, Kevin
2023-07-11 1:40 ` Liu, Jingqi
2023-07-11 2:52 ` Baolu Lu
2023-07-11 6:23 ` Liu, Jingqi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230625150442.42197-1-Jingqi.liu@intel.com \
--to=jingqi.liu@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox