From: Will Deacon <will@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com, Will Deacon <will@kernel.org>,
iommu@lists.linux.dev, Christoph Hellwig <hch@lst.de>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Robin Murphy <robin.murphy@arm.com>,
Petr Tesarik <petr.tesarik1@huawei-partners.com>,
Dexuan Cui <decui@microsoft.com>,
Nicolin Chen <nicolinc@nvidia.com>,
Michael Kelley <mhklinux@outlook.com>
Subject: [PATCH v4 5/5] iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
Date: Wed, 21 Feb 2024 11:35:04 +0000 [thread overview]
Message-ID: <20240221113504.7161-6-will@kernel.org> (raw)
In-Reply-To: <20240221113504.7161-1-will@kernel.org>
From: Nicolin Chen <nicolinc@nvidia.com>
The swiotlb does not support a mapping size > swiotlb_max_mapping_size().
On the other hand, with a 64KB PAGE_SIZE configuration, it's observed that
an NVME device can map a size between 300KB~512KB, which certainly failed
the swiotlb mappings, though the default pool of swiotlb has many slots:
systemd[1]: Started Journal Service.
=> nvme 0000:00:01.0: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 32 (slots)
note: journal-offline[392] exited with irqs disabled
note: journal-offline[392] exited with preempt_count 1
Call trace:
[ 3.099918] swiotlb_tbl_map_single+0x214/0x240
[ 3.099921] iommu_dma_map_page+0x218/0x328
[ 3.099928] dma_map_page_attrs+0x2e8/0x3a0
[ 3.101985] nvme_prep_rq.part.0+0x408/0x878 [nvme]
[ 3.102308] nvme_queue_rqs+0xc0/0x300 [nvme]
[ 3.102313] blk_mq_flush_plug_list.part.0+0x57c/0x600
[ 3.102321] blk_add_rq_to_plug+0x180/0x2a0
[ 3.102323] blk_mq_submit_bio+0x4c8/0x6b8
[ 3.103463] __submit_bio+0x44/0x220
[ 3.103468] submit_bio_noacct_nocheck+0x2b8/0x360
[ 3.103470] submit_bio_noacct+0x180/0x6c8
[ 3.103471] submit_bio+0x34/0x130
[ 3.103473] ext4_bio_write_folio+0x5a4/0x8c8
[ 3.104766] mpage_submit_folio+0xa0/0x100
[ 3.104769] mpage_map_and_submit_buffers+0x1a4/0x400
[ 3.104771] ext4_do_writepages+0x6a0/0xd78
[ 3.105615] ext4_writepages+0x80/0x118
[ 3.105616] do_writepages+0x90/0x1e8
[ 3.105619] filemap_fdatawrite_wbc+0x94/0xe0
[ 3.105622] __filemap_fdatawrite_range+0x68/0xb8
[ 3.106656] file_write_and_wait_range+0x84/0x120
[ 3.106658] ext4_sync_file+0x7c/0x4c0
[ 3.106660] vfs_fsync_range+0x3c/0xa8
[ 3.106663] do_fsync+0x44/0xc0
Since untrusted devices might go down the swiotlb pathway with dma-iommu,
these devices should not map a size larger than swiotlb_max_mapping_size.
To fix this bug, add iommu_dma_max_mapping_size() for untrusted devices to
take into account swiotlb_max_mapping_size() v.s. iova_rcache_range() from
the iommu_dma_opt_mapping_size().
Fixes: 82612d66d51d ("iommu: Allow the dma-iommu api to use bounce buffers")
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/ee51a3a5c32cf885b18f6416171802669f4a718a.1707851466.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
---
drivers/iommu/dma-iommu.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c
index 50ccc4f1ef81..7d1a20da6d94 100644
--- a/drivers/iommu/dma-iommu.c
+++ b/drivers/iommu/dma-iommu.c
@@ -1706,6 +1706,13 @@ static size_t iommu_dma_opt_mapping_size(void)
return iova_rcache_range();
}
+static size_t iommu_dma_max_mapping_size(struct device *dev)
+{
+ if (is_swiotlb_active(dev) && dev_is_untrusted(dev))
+ return swiotlb_max_mapping_size(dev);
+ return SIZE_MAX;
+}
+
static const struct dma_map_ops iommu_dma_ops = {
.flags = DMA_F_PCI_P2PDMA_SUPPORTED,
.alloc = iommu_dma_alloc,
@@ -1728,6 +1735,7 @@ static const struct dma_map_ops iommu_dma_ops = {
.unmap_resource = iommu_dma_unmap_resource,
.get_merge_boundary = iommu_dma_get_merge_boundary,
.opt_mapping_size = iommu_dma_opt_mapping_size,
+ .max_mapping_size = iommu_dma_max_mapping_size,
};
/*
--
2.44.0.rc0.258.g7320e95886-goog
next prev parent reply other threads:[~2024-02-21 11:35 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 11:34 [PATCH v4 0/5] Fix double allocation in swiotlb_alloc() Will Deacon
2024-02-21 11:35 ` [PATCH v4 1/5] swiotlb: Fix double-allocation of slots due to broken alignment handling Will Deacon
2024-02-21 23:35 ` Michael Kelley
2024-02-23 12:47 ` Will Deacon
2024-02-23 13:36 ` Petr Tesařík
2024-02-23 17:04 ` Michael Kelley
2024-02-27 15:38 ` Christoph Hellwig
2024-02-21 11:35 ` [PATCH v4 2/5] swiotlb: Enforce page alignment in swiotlb_alloc() Will Deacon
2024-02-21 23:36 ` Michael Kelley
2024-02-21 11:35 ` [PATCH v4 3/5] swiotlb: Honour dma_alloc_coherent() " Will Deacon
2024-02-21 23:36 ` Michael Kelley
2024-02-21 11:35 ` [PATCH v4 4/5] swiotlb: Fix alignment checks when both allocation and DMA masks are present Will Deacon
2024-02-21 23:37 ` Michael Kelley
2024-02-21 11:35 ` Will Deacon [this message]
2024-02-21 23:39 ` [PATCH v4 5/5] iommu/dma: Force swiotlb_max_mapping_size on an untrusted device Michael Kelley
2024-02-23 19:58 ` Nicolin Chen
2024-02-23 21:10 ` Michael Kelley
2024-02-25 21:17 ` Michael Kelley
2024-02-26 19:35 ` Robin Murphy
2024-02-26 21:11 ` Michael Kelley
2024-02-27 13:22 ` Robin Murphy
2024-02-27 14:30 ` Michael Kelley
2024-02-27 15:40 ` Christoph Hellwig
2024-02-27 15:53 ` Robin Murphy
2024-02-28 12:05 ` Will Deacon
2024-02-23 11:34 ` [PATCH v4 0/5] Fix double allocation in swiotlb_alloc() Nicolin Chen
2024-02-23 12:25 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240221113504.7161-6-will@kernel.org \
--to=will@kernel.org \
--cc=decui@microsoft.com \
--cc=hch@lst.de \
--cc=iommu@lists.linux.dev \
--cc=kernel-team@android.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mhklinux@outlook.com \
--cc=nicolinc@nvidia.com \
--cc=petr.tesarik1@huawei-partners.com \
--cc=robin.murphy@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox