Linux IOMMU Development
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: iommu@lists.linux.dev
Cc: Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Joel Granados <joel.granados@kernel.org>,
	Jason Gunthorpe <jgg@ziepe.ca>, Kevin Tian <kevin.tian@intel.com>,
	Yi Liu <yi.l.liu@intel.com>,
	linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com>
Subject: [PATCH v2 1/1] iommu/vt-d: Drain PRQs when domain removed from RID
Date: Fri,  1 Nov 2024 12:55:43 +0800	[thread overview]
Message-ID: <20241101045543.70086-1-baolu.lu@linux.intel.com> (raw)

As this iommu driver now supports page faults for requests without
PASID, page requests should be drained when a domain is removed from
the RID2PASID entry.

This results in the intel_iommu_drain_pasid_prq() call being moved to
intel_pasid_tear_down_entry(). This indicates that when a translation
is removed from any PASID entry and the PRI has been enabled on the
device, page requests are drained in the domain detachment path.

The intel_iommu_drain_pasid_prq() helper has been modified to support
sending device TLB invalidation requests for both PASID and non-PASID
cases.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
 drivers/iommu/intel/iommu.c |  1 -
 drivers/iommu/intel/pasid.c |  1 +
 drivers/iommu/intel/prq.c   | 26 +++++++++-----------------
 3 files changed, 10 insertions(+), 18 deletions(-)

Change log:
v2:
 - Use iotlb_inv_dsc for prq draining of RID2PASID.
 - Fix a 0day compiling warning.
v1:
 - https://lore.kernel.org/linux-iommu/20241031095139.44220-1-baolu.lu@linux.intel.com/

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 87a3563dfe54..3878f35be09d 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -4069,7 +4069,6 @@ static void intel_iommu_remove_dev_pasid(struct device *dev, ioasid_t pasid,
 	intel_iommu_debugfs_remove_dev_pasid(dev_pasid);
 	kfree(dev_pasid);
 	intel_pasid_tear_down_entry(iommu, dev, pasid, false);
-	intel_iommu_drain_pasid_prq(dev, pasid);
 }
 
 static int intel_iommu_set_dev_pasid(struct iommu_domain *domain,
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index 7e76062a7ad2..31665fb62e1c 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -265,6 +265,7 @@ void intel_pasid_tear_down_entry(struct intel_iommu *iommu, struct device *dev,
 		iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH);
 
 	devtlb_invalidation_with_pasid(iommu, dev, pasid);
+	intel_iommu_drain_pasid_prq(dev, pasid);
 }
 
 /*
diff --git a/drivers/iommu/intel/prq.c b/drivers/iommu/intel/prq.c
index b9f2d9400efe..9796556901d9 100644
--- a/drivers/iommu/intel/prq.c
+++ b/drivers/iommu/intel/prq.c
@@ -63,26 +63,18 @@ void intel_iommu_drain_pasid_prq(struct device *dev, u32 pasid)
 	struct dmar_domain *domain;
 	struct intel_iommu *iommu;
 	struct qi_desc desc[3];
-	struct pci_dev *pdev;
 	int head, tail;
 	u16 sid, did;
-	int qdep;
 
 	info = dev_iommu_priv_get(dev);
-	if (WARN_ON(!info || !dev_is_pci(dev)))
-		return;
-
 	if (!info->pri_enabled)
 		return;
 
 	iommu = info->iommu;
 	domain = info->domain;
-	pdev = to_pci_dev(dev);
 	sid = PCI_DEVID(info->bus, info->devfn);
 	did = domain ? domain_id_iommu(domain, iommu) : FLPT_DEFAULT_DID;
 
-	qdep = pci_ats_queue_depth(pdev);
-
 	/*
 	 * Check and wait until all pending page requests in the queue are
 	 * handled by the prq handling thread.
@@ -114,15 +106,15 @@ void intel_iommu_drain_pasid_prq(struct device *dev, u32 pasid)
 	desc[0].qw0 = QI_IWD_STATUS_DATA(QI_DONE) |
 			QI_IWD_FENCE |
 			QI_IWD_TYPE;
-	desc[1].qw0 = QI_EIOTLB_PASID(pasid) |
-			QI_EIOTLB_DID(did) |
-			QI_EIOTLB_GRAN(QI_GRAN_NONG_PASID) |
-			QI_EIOTLB_TYPE;
-	desc[2].qw0 = QI_DEV_EIOTLB_PASID(pasid) |
-			QI_DEV_EIOTLB_SID(sid) |
-			QI_DEV_EIOTLB_QDEP(qdep) |
-			QI_DEIOTLB_TYPE |
-			QI_DEV_IOTLB_PFSID(info->pfsid);
+	if (pasid == IOMMU_NO_PASID) {
+		qi_desc_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH, &desc[1]);
+		qi_desc_dev_iotlb(sid, info->pfsid, info->ats_qdep, 0,
+				  MAX_AGAW_PFN_WIDTH, &desc[2]);
+	} else {
+		qi_desc_piotlb(did, pasid, 0, -1, 0, &desc[1]);
+		qi_desc_dev_iotlb_pasid(sid, info->pfsid, pasid, info->ats_qdep,
+					0, MAX_AGAW_PFN_WIDTH, &desc[2]);
+	}
 qi_retry:
 	reinit_completion(&iommu->prq_complete);
 	qi_submit_sync(iommu, desc, 3, QI_OPT_WAIT_DRAIN);
-- 
2.43.0


             reply	other threads:[~2024-11-01  4:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-01  4:55 Lu Baolu [this message]
2024-11-01  6:23 ` [PATCH v2 1/1] iommu/vt-d: Drain PRQs when domain removed from RID Yi Liu
2024-11-02  3:16 ` Baolu Lu
2024-11-04  8:30   ` Joel Granados

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241101045543.70086-1-baolu.lu@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@ziepe.ca \
    --cc=joel.granados@kernel.org \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    --cc=yi.l.liu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox